# SANE: Backends (Drivers)

The following table summarizes the backends/drivers distributed with sane-backends-1.0.12, and the hardware or software they support.

This is only a summary! Please consult the manpages and the author-supplied webpages for more detailed (and usually important) information concerning each backend.

There are special tables for parallel port and USB scanners from Jonathan Buzzard.

If you have new information or corrections, please send e-mail to sane-devel, the SANE mailing list.

For an explanation of the tables, see the legend.

There are tables for scanners, still cameras, video cameras, APIs, and meta backends.

## Scanners

Backends: abaton, agfafocus, apple, artec, artec_eplus48u, as6e, avision, bh, canon, canon630u, canon_pp, coolscan, coolscan2, epson, fujitsu, gt68xx, hp, hp5400, hpsj5s, ibm, leo, ma1509, matsushita, microtek, microtek2, mustek, mustek_pp, mustek_usb, nec, pie, plustek, ricoh, s9036, sceptre, sharp, sm3600, SnapScan, sp15c, st400, tamarack, teco1, teco2, teco3, umax, umax1220u, umax_pp, unsupported

### Backend: abaton (v0.1)

Manual page: sane-abaton

Manufacturer | Model | Interface | Status | Comment
--- | --- | --- | --- | ---
Abaton | Scan 300/GS | SCSI | alpha | All known modes and functions supported
Scan 300/S | SCSI | untested | Untested, use with caution

### Backend: agfafocus (v0.2)

Manual page: sane-agfafocus

Manufacturer | Model | Interface | Status | Comment
--- | --- | --- | --- | ---
AGFA | Focus GS Scanner | SCSI | untested | 6 bit gray
Focus Lineart Scanner | SCSI | untested | Lineart only? Untested.
Focus II | SCSI | untested | gray only
Focus Color | SCSI | alpha | 3-pass
Focus Color Plus | SCSI | alpha | 3-pass
Siemens | S9036 | SCSI | untested | gray only

### Backend: apple (v0.31)

Manual page: sane-apple

Manufacturer | Model | Interface | Status | Comment
--- | --- | --- | --- | ---
Apple | Apple Scanner | SCSI | alpha | 4bit, 16 shades of gray
OneScanner | SCSI | alpha | 8bit, 256 shades of gray. The backend needs work especially in the quantization code but it may work.
ColorOneScanner | SCSI | alpha | truecolor (needs much work) but it scans in non color modes.

### Backend: artec (v0.5.16)

Link(s): http://www4.infi.net/~cpinkham/sane/sane-artec-doc.html
Manual page: sane-artec

Manufacturer | Model | Interface | Status | Comment
--- | --- | --- | --- | ---
Artec/Ultima | AT3 | SCSI | stable | all modes working
A6000C | SCSI | stable | all modes working
A6000C PLUS | SCSI | stable | f/w <= v1.92 alpha, f/w >= v1.93 OK
AT6 | SCSI | alpha | First scan works, subsequent fail until scanner power cycle.
AT12 | SCSI | stable | all modes working
AM12S | SCSI | stable | all modes working
BlackWidow | BW4800SP | SCSI | stable | rebadged Artec AT3
Plustek | OpticPro 19200S | SCSI | stable | rebadged Artec AM12S

### Backend: artec_eplus48u (v0.0.10)

Link(s): http://www.angelfire.com/linux/crapsite/
Manual page: sane-artec_eplus48u

Manufacturer | Model | Interface | Status | Comment
--- | --- | --- | --- | ---
Artec/Ultima | E+ 48U | USB | beta | CIS scanner based on the GT6816 chip. Apparently all other devices are re-badged Artec scanners.
Medion/Lifetec/Tevion/Cytron | MD9693 | USB | beta |
MD9705 | USB | beta |
MD4394 | USB | beta | Obviously two different scanners were sold under this name. Only scanners with product id 0x4003 will work; try the gt68xx backend otherwise
Trust | Easy Webscan 19200 | USB | beta | Different product id: 0x4006
Memorex | MEM 48U | USB | beta | Different product id: 0x4005
UMAX | AstraSlim SE | USB | beta | Different product id: 0x4009

### Backend: as6e (v0.4.2)

Link(s): http://as6edriver.sourceforge.net/
Manual page: sane-as6e

Manufacturer | Model | Interface | Status | Comment
--- | --- | --- | --- | ---
Artec/Ultima | AS6E | Parport | alpha | Requires the program 'as6edriver' to run.

### Backend: avision (vBuild: 70)

Link(s): http://drocklinux.dyndns.org/rene/avision/index.html
Manual page: sane-avision

Manufacturer | Model | Interface | Status | Comment
--- | --- | --- | --- | ---
Avision | AV100CS | SCSI | untested |
AV100IIICS | SCSI | untested |
AV100S | SCSI | untested |
AV210 | USB | untested |
AV220 | USB | untested |
AV240SC | SCSI | untested |
AV260CS | SCSI | untested |
AV360CS | SCSI | untested |
AV363CS | SCSI | untested |
AV420CS | SCSI | untested |
AV6120 | SCSI | untested |
AV610CU Scancopier | USB | untested | 1 pass, 600 dpi
AV620CS | SCSI | stable | 1 pass, 600 dpi
AV620CS Plus | SCSI | stable | 1 pass, 1200 dpi
AV630CS | SCSI | stable | 1 pass, 1200 dpi - regularly tested
AV630CSL | SCSI | untested | 1 pass, 1200 dpi
AV6240 | SCSI | stable | 1 pass, ??? dpi
AV600U | USB | untested | 1 pass, 1200 dpi
AV600U Plus | USB | untested | 1 pass, 1200 dpi
AV660S | USB | untested | 1 pass, 1200 dpi
AV680S | USB | untested | 1 pass, 1200 dpi
AV690U | USB | untested | 1 pass, 2400 dpi
AV800S | SCSI | untested | 1 pass, 1200 dpi
AV810C | SCSI | untested | 1 pass, 1200 dpi
AV820 | SCSI | untested | 1 pass, 1200 dpi
AV820C | SCSI | untested | 1 pass, 1200 dpi
AV820C Plus | SCSI | untested | 1 pass, 1200 dpi
AV830C | SCSI | untested | 1 pass, 1200 dpi
AV830C Plus | SCSI | untested | 1 pass, 1200 dpi
AV880 | SCSI | untested | 1 pass, 1200 dpi
AV880C | SCSI | untested | 1 pass, 1200 dpi
AV8000S | SCSI | stable | 1 pass, 1200 dpi, A3 - regularly tested
AVA3 | SCSI | untested | 1 pass, 600 dpi, A3
Hewlett-Packard | ScanJet 5300C | USB | stable | 1 pass, 1200 dpi - regularly tested
ScanJet 5370C | USB | alpha | 1 pass, 2400 dpi
ScanJet 7400c | USB | beta | 1 pass, 1200 dpi - dual USB/SCSI interface
ScanJet 7450c | USB | beta | 1 pass, 1200 dpi - dual USB/SCSI interface
ScanJet 7490c | USB | beta | 1 pass, 1200 dpi - dual USB/SCSI interface
Minolta | FS-V1 | USB | alpha | 1 pass, film-scanner
Elite II | USB | untested | 1 pass, film-scanner
Mitsubishi | MCA-ADFC | SCSI | untested |
S1200C | SCSI | untested |
S600C | SCSI | untested |
SS600 | SCSI | beta |
Fujitsu | ScanPartner | SCSI | untested |
ScanPartner 10 | SCSI | untested |
ScanPartner 10C | SCSI | untested |
ScanPartner 15C | SCSI | untested |
ScanPartner 300C | SCSI | untested |
ScanPartner 600C | SCSI | untested |
ScanPartner Jr | SCSI | untested |
ScanStation | SCSI | untested |

### Backend: bh (v1.0-4)

Link(s): http://www.martoneconsulting.com/sane-bh.html
Manual page: sane-bh
Comment: Supports Copiscan II scanners with Remote SCSI Controller (RSC) interface

Manufacturer | Model | Interface | Status | Comment
--- | --- | --- | --- | ---
Bell and Howell | COPISCAN II 6338 | SCSI | beta | Duplex Scanner with ACE - development model
COPISCAN II 2135 | SCSI | untested | Simplex Scanner
COPISCAN II 2137(A) | SCSI | beta | Simplex Scanner (with ACE) - limited testing
COPISCAN II 2138A | SCSI | untested | Simplex Scanner with ACE
COPISCAN II 3238 | SCSI | untested | Simplex Scanner
COPISCAN II 3338(A) | SCSI | untested | Simplex Scanner (with ACE)

### Backend: canon (v1.12)

Link(s): http://www.rzg.mpg.de/~mpd/sane/
Manual page: sane-canon

Manufacturer | Model | Interface | Status | Comment
--- | --- | --- | --- | ---
Canon | CanoScan 300 | SCSI | beta | 1 pass; flatbed scanner
CanoScan 600 | SCSI | beta |
CanoScan 620S | SCSI | beta | 1 pass; flatbed scanner
CanoScan 1200S | SCSI | beta | 1 pass; flatbed scanner
CanoScan 2700F | SCSI | beta | 1 pass; film scanner
CanoScan 2710S | SCSI | beta | 1 pass; 36bit film scanner

### Backend: canon630u (v0.1)

Link(s): http://canon-fb630u.sourceforge.net/
Manual page: sane-canon630u

Manufacturer | Model | Interface | Status | Comment
--- | --- | --- | --- | ---
Canon | CanoScan fb630u | USB | beta | OK
CanoScan fb636u | USB | untested | hopefully works

### Backend: canon_pp (v0.32)

Link(s): http://canon-fb330p.sourceforge.net
Manual page: sane-canon_pp

Manufacturer | Model | Interface | Status | Comment
--- | --- | --- | --- | ---
Canon | CanoScan FB310P | Parport (ECP) | unsupported | Rebadged Avision, different command set
CanoScan FB610P | Parport (ECP) | unsupported | Rebadged Avision, different command set
CanoScan FB320P | Parport (ECP) | alpha | Newly added support
CanoScan FB620P | Parport (ECP) | alpha | Newly added support
CanoScan FB330P | Parport (ECP) | beta |
CanoScan FB630P | Parport (ECP) | beta |
CanoScan N340P | Parport (ECP) | beta |
CanoScan N640P | Parport (ECP) | beta |
CanoScan N640P ex | Parport (ECP) | beta | Just an N640P in a different box?

### Backend: coolscan (v0.4.3)

Link(s): http://andreas.rick.free.fr/sane/
Manual page: sane-coolscan

Manufacturer | Model | Interface | Status | Comment
--- | --- | --- | --- | ---
Nikon | LS-20 | SCSI | alpha | The LS-20 has been replaced by the LS-30
LS-30 | SCSI | alpha | alpha: only 24/30 bit RGB + 32/40 bit RGBI
LS-2000 | SCSI | alpha | alpha: only 24/36 bit + RGB 32/48 bit RGBI
LS-1000 | SCSI | alpha | Doesn't support gamma correction

### Backend: coolscan2 (v0.1.8)

Link(s): http://coolscan2.sourceforge.net/
Manual page: sane-coolscan2

Manufacturer | Model | Interface | Status | Comment
--- | --- | --- | --- | ---
Nikon | LS 30 | SCSI | beta | working -- model available to developer
LS 2000 | SCSI | beta |
LS 40 ED | USB | beta |
LS 4000 ED | IEEE1394 | beta | needs linux kernel 2.4.19 or later
LS 8000 ED | IEEE1394 | beta | needs linux kernel 2.4.19 or later

### Backend: epson (v0.2.32)

Link(s): http://www.khk.net/sane
Manual page: sane-epson

Manufacturer | Model | Interface | Status | Comment
--- | --- | --- | --- | ---
Epson | GT-5000 | Parport | beta |
Actionscanner II | Parport | beta | US version of GT-5000
GT-6000 | SCSI Parport | beta |
ES-300C | SCSI Parport | beta | US version of GT-6000
GT-5500 | SCSI | beta |
GT-6500 | Parport | beta |
ES-600C | Parport | beta | US version of GT-6500
ES-1200C | Parport | beta | US version of GT-9000
GT-7000 | SCSI | beta |
GT-8000 | SCSI | beta |
ES-8500 | SCSI | beta |
Perfection 636S | SCSI | stable | US version of GT-7000
Perfection 636U | USB | stable |
Perfection 610 | USB | stable |
Perfection 640 | USB | stable |
Perfection 1200S | SCSI | stable |
Perfection 1200U | USB | stable |
Perfection 1200Photo | USB | stable | with TPU
Perfection 1240 | SCSI USB | stable |
Perfection 1640 | SCSI USB | stable |
Perfection 1650 | USB | stable |
Perfection 1660 | USB | stable |
Perfection 2400 | USB | stable |
Perfection 2450 | USB IEEE-1394 | stable |
Perfection 3200 | USB | stable | US version of the GT-9800
Expression 636 | SCSI | stable | US version of GT-9500
Expression 800 | SCSI | stable |
Expression 1600 | SCSI USB IEEE-1394 | stable |
Expression 1680 | SCSI USB IEEE-1394 | stable |
FilmScan 200 | SCSI | untested | A better backend for the FilmScan 200 can be found at http://www.vjet.demon.co.uk/scanner/
CX-3200 | USB | alpha |
CX-5200 | USB | alpha |

### Backend: fujitsu (v1.0)

Manual page: sane-fujitsu

Manufacturer | Model | Interface | Status | Comment
--- | --- | --- | --- | ---
Fujitsu | M3096G | SCSI | beta |
M3091DCd | SCSI | beta |
M3092DCd | SCSI | beta |
M3093GXim | SCSI | beta |
M3093GDim | SCSI | beta |
M4097 | SCSI | beta |
fi-4120C | USB SCSI | untested | Probably similar to fi-4220C?
fi-4220C | SCSI USB | beta |
fi-4340C | SCSI USB | beta |
ScanPartner 93GX | SCSI | beta |

### Backend: gt68xx (v1.0-46)

Link(s): http://www.meier-geinitz.de/sane/gt68xx-backend/
Manual page: sane-gt68xx
Comment: Only the USB scanners mentioned below are supported. For other Mustek BearPaws, look at the Plustek and the MA-1509 backend.

Manufacturer | Model | Interface | Status | Comment
--- | --- | --- | --- | ---
Mustek | BearPaw 1200 CS | USB | beta |
BearPaw 1200 CU | USB | beta |
BearPaw 1200 CU Plus | USB | beta |
BearPaw 1200 TA | USB | beta | Transparency adapter supported
BearPaw 2400 CS | USB | untested | probably works, reports are welcome
BearPaw 2400 CS Plus | USB | beta | works, problems with 12/16 bit modes?
BearPaw 2400 CU | USB | alpha | works, but is slow
BearPaw 2400 CU Plus | USB | beta |
BearPaw 2400 TA | USB | beta | Transparency adapter supported
BearPaw 2400 TA Plus | USB | beta | Transparency adapter supported
ScanExpress 1200 UB Plus | USB | beta |
ScanExpress A3 USB | USB | alpha | Calibration may be wrong. Please contact me if you have such a device.
ScanExpress 2400 USB | USB | untested | Should be detected but may need some more work in the code. Testers welcome.
Plustek | OpticPro 1248U | USB | beta | Works up to 600 dpi
OpticPro UT16B | USB | untested | Isn't detected yet but may work some time in future. Testers welcome.
Artec/Ultima | Ultima 2000 | USB | beta | works, only product id 0x4002 is supported
Ultima 2000 e+ | USB | alpha | works, only limited testing until now
Boeder | Sm@rtScan Slim Edition | USB | beta | similar to Artec Ultima 2000
Packard Bell | Diamond 1200 | USB | beta | similar to Mustek BearPaw 1200 (Plus)
Diamond 1200 Plus | USB | beta | similar to Mustek BearPaw 1200 Plus
Medion/Lifetec/Tevion/Cytron | MD 4394 | USB | beta | Product id 0x4002. If you have 0x4003, use artec_eplus48u backend.
MD/LT 9375 | USB | untested | Untested, but is reported to have the same ids as the Artec Ultima 2000. Please test.
MD/LT 9385 | USB | beta | Similar to Artec Ultima 2000
LT 9452 | USB | beta | Similar to Mustek ScanExpress 1200 UB Plus
MD 9458 | USB | beta | Similar to Artec Ultima 2000 (e+?)
Trust | Flat Scan USB 19200 | USB | beta | Similar to Artec Ultima 2000
Compact Scan USB 19200 | USB | beta | works, if you have vendor id 0x055f and product id 0x0006, use the mustek_usb backend instead, similar to Mustek ScanExpress 1200 UB (Plus)
Lexmark | X70 | USB | beta | works, some resolutions fail at 16 bit
X73 | USB | beta | works, some resolutions fail at 16 bit, same as X70
Genius | Colorpage Vivid3x | USB | alpha | Works but has limited testing
Colorpage Vivid3xe | USB | alpha | Works but has limited testing. Color problems? Reports are welcome.

### Backend: hp (v1.02)

Link(s): http://www.kirchgessner.net/
Manual page: sane-hp

Manufacturer | Model | Interface | Status | Comment
--- | --- | --- | --- | ---
Hewlett-Packard | ScanJet Plus | Propietary | stable | Driver for HP parallel interface card required
ScanJet IIc | SCSI | stable |
ScanJet IIp | SCSI | stable |
ScanJet IIcx | SCSI | stable |
ScanJet 3c | SCSI | stable |
ScanJet 3p | SCSI | stable |
ScanJet 4c | SCSI | stable |
ScanJet 4p | SCSI | stable |
ScanJet 4100C | USB | stable |
ScanJet 5p | SCSI | stable |
ScanJet 5100C | Parport | stable | Requires ppscsi driver and epst module
ScanJet 5200C | Parport USB | stable | Parallel interface requires ppscsi driver and epst module
ScanJet 6100C | SCSI | stable |
ScanJet 6200C | SCSI USB | stable |
ScanJet 6250C | SCSI USB | stable |
ScanJet 6300C | SCSI USB | stable |
ScanJet 6350C | SCSI USB | stable |
ScanJet 6390C | SCSI USB | stable |
PhotoSmart PhotoScanner | SCSI | stable |

### Backend: hp5400 (v1.0-2, NEW!)

Link(s): http://sourceforge.net/projects/hp5400backend
Manual page: sane-hp5400
Comment: HP5400 and HP5470 scanners. Prototype backend available

Manufacturer | Model | Interface | Status | Comment
--- | --- | --- | --- | ---
Hewlett-Packard | ScanJet 5400c | USB | alpha |
ScanJet 5470c | USB | alpha |
ScanJet 5490c | USB | untested |

### Backend: hpsj5s (v0.03)

Link(s): http://hpsj5s.sourceforge.net/
Manual page: sane-hpsj5s

Manufacturer | Model | Interface | Status | Comment
--- | --- | --- | --- | ---
Hewlett-Packard | ScanJet 5s | Parport (EPP) | alpha | Requires libieee1284 library

### Backend: ibm (v1.0-4, NEW!)

Link(s): http://www.meier-geinitz.de/sane/ibm-backend/
Manual page: sane-ibm
Comment: This backend has had only limited testing. It needs more work especially for the Ricoh scanners. Patches are welcome.

Manufacturer | Model | Interface | Status | Comment
--- | --- | --- | --- | ---
IBM | 2456 | SCSI | alpha | Was reported to work long time ago. Reports are welcome.
Ricoh | IS-410 | SCSI | untested | Untested, please report!
IS-420 | SCSI | alpha | Works at least in flatbed mode.
IS-430 | SCSI | untested | Untested, please report!

### Backend: leo (v1.0-10)

Link(s): http://fz.eryx.net/sane/#leo
Manual page: sane-leo

Manufacturer | Model | Interface | Status | Comment
--- | --- | --- | --- | ---
LEO | LEOScan S3 | SCSI | beta | FCC ID LUZFS1130
Across Technologies | FS-1130 | SCSI | beta | FCC ID LUZFS1130
Genius | FS-1130 Colorpage Scanner | SCSI | untested |

### Backend: ma1509 (v1.0-2, NEW!)

Link(s): http://www.meier-geinitz.de/sane/ma1509-backend/
Manual page: sane-ma1509

Manufacturer | Model | Interface | Status | Comment
--- | --- | --- | --- | ---
Mustek | BearPaw 1200 F | USB | alpha | Works upto 600 dpi. No support for TA and ADF yet.

### Backend: matsushita (v1.0-6)

Link(s): http://fz.eryx.net/sane
Manual page: sane-matsushita

Manufacturer | Model | Interface | Status | Comment
--- | --- | --- | --- | ---
Panasonic | KV-SS25 | SCSI | stable |
KV-SS25D | SCSI | stable |
KV-SS50 | SCSI | untested |
KV-SS55 | SCSI | untested |
KV-SS50EX | SCSI | untested |
KV-SS55EX | SCSI | untested |
KV-SS850 | SCSI | untested |
KV-SS855 | SCSI | untested |

### Backend: microtek (v0.13.1)

Link(s): http://www.mir.com/mtek/
Manual page: sane-microtek

Manufacturer | Model | Interface | Status | Comment
--- | --- | --- | --- | ---
Microtek | Scanmaker E6 | SCSI | stable |
Scanmaker E3 | SCSI | beta |
Scanmaker E2 | SCSI | beta | 3-pass
Scanmaker 35t+ | SCSI | beta | slide-scanner
Scanmaker 45t | SCSI | beta | slide-scanner
Scanmaker 35 | SCSI | beta | slide-scanner
Scanmaker III | SCSI | beta |
Scanmaker IISP | SCSI | beta |
Scanmaker IIHR | SCSI | beta | 3-pass
Scanmaker IIG | SCSI | beta | gray only
Scanmaker II | SCSI | beta | 3-pass
Scanmaker 600Z(S) | SCSI | untested |
Scanmaker 600G(S) | SCSI | alpha | gray only (see manpage)
Color PageWiz | SCSI (Parport) | beta | sheet-fed (preliminary, see mapage)
Agfa | Arcus II | SCSI | beta | Arcus *II*, not Arcus!
StudioScan | SCSI | beta |
StudioScan II | SCSI | beta |
StudioScan IIsi | SCSI | beta |
DuoScan | SCSI | alpha |

### Backend: microtek2 (v0.95)

Link(s): http://karstenfestag.gmxhome.de
Manual page: sane-microtek2

Manufacturer | Model | Interface | Status | Comment
--- | --- | --- | --- | ---
Microtek | ScanMaker E3plus | Parport | stable |
ScanMaker E3plus | SCSI | stable |
ScanMaker X6 | SCSI | stable |
ScanMaker X6EL | SCSI | alpha |
ScanMaker X6USB | USB | beta |
ScanMaker V300 | SCSI | beta |
ScanMaker V300 | Parport | beta |
ScanMaker V310 | SCSI | alpha |
ScanMaker V310 | Parport | alpha |
ScanMaker V600 | SCSI | alpha |
ScanMaker V600 | Parport | alpha |
ScanMaker 330 | SCSI | alpha |
ScanMaker 630 | SCSI | alpha |
ScanMaker 636 | SCSI | stable |
ScanMaker 9600XL | SCSI | stable | only flatbed mode ?
ScanMaker 9600XL | SCSI | alpha |
Phantom 330CX | Parport | stable |
SlimScan C3 | Parport | stable |
Phantom 636 | SCSI | stable |
Phantom 636CX | Parport | stable |
SlimScan C6 | USB | stable |
ScanMaker V6USL | SCSI | stable |
ScanMaker V6USL | USB | stable |
ScanMaker X12USL | SCSI | beta | only Flatbed mode ?
Vobis | HighScan | SCSI | stable | only E3plus based models
Scanport | SQ300 | Parport? | alpha |
SQ2030 | Parport | alpha |
SQ4836 | SCSI | alpha |

### Backend: mustek (v1.0-132)

Link(s): http://www.meier-geinitz.de/sane/mustek-backend/
Manual page: sane-mustek
Comment: Most Mustek SCSI scanners are supported by this backend. For USB scanners, look at the mustek_usb backend.

Manufacturer | Model | Interface | Status | Comment
--- | --- | --- | --- | ---
Mustek | Paragon MFS-6000CX | SCSI | stable | 3-pass
Paragon MFS-12000CX | SCSI | stable | 3-pass
Paragon MFC-600S | SCSI | stable |
Paragon 600 II CD | SCSI | stable |
ScanMagic 600 II SP | SCSI | stable |
Paragon MFC-800S | SCSI | stable |
Paragon 800 II SP | SCSI | stable |
Paragon MFS-6000SP | SCSI | stable |
Paragon MFS-8000SP | SCSI | stable |
Paragon MFS-1200SP | SCSI | stable |
Paragon MFS-12000SP | SCSI | stable |
ScanExpress 6000SP | SCSI | stable |
ScanExpress 12000SP | SCSI | stable |
ScanExpress 12000SP Plus | SCSI | stable |
Paragon 1200 III SP | SCSI | stable |
Paragon 1200 LS | SCSI | stable |
ScanMagic 9636S | SCSI | stable |
ScanMagic 9636S Plus | SCSI | stable |
ScanExpress A3 SP | SCSI | beta | Please test!
Paragon 1200 SP Pro | SCSI | stable |
Paragon 1200 A3 Pro | SCSI | stable |
Paragon 600 II N | Proprietary | stable |
Trust | Imagery 1200 | SCSI | stable | 3-pass, Mustek Paragon MFS-6000CX compatible
Imagery 1200 SP | SCSI | stable | Mustek Paragon MFS-6000SP compatible
Imagery 4800 SP | SCSI | stable | Mustek Paragon 500 II CD compatible
SCSI Connect 19200 | SCSI | stable | Mustek ScanExpress 12000SP compatible
SCSI excellence series 19200 | SCSI | stable | Mustek ScanExpress 12000SP compatible
Primax | Compact 4800 SCSI | SCSI | stable | Mustek 600 II CD compatible

### Backend: mustek_pp (v12)

Link(s): http://penguin-breeder.org/?page=mustek_pp
Manual page: sane-mustek_pp
Comment: Supports CCD and CIS type parallel port scanners from Mustek

Manufacturer | Model | Interface | Status | Comment
--- | --- | --- | --- | ---
Mustek | ScanExpress 6000 P | Parport (EPP) | alpha | 300 dpi CCD scanner
ScanExpress 600 SEP | Parport (EPP) | alpha | 300 dpi CCD scanner
ScanMagic 4800 P | Parport (EPP) | alpha | 300 dpi CCD scanner
600 III EP Plus | Parport (EPP) | alpha | 300 dpi CCD scanner
ScanExpress 600 CP | Parport (EPP) | beta | CIS scanner
ScanMagic 600 CP | Parport (EPP) | beta | CIS scanner
ScanExpress 1200 CP | Parport (EPP) | beta | CIS scanner
ScanExpress 1200 CP+ | Parport (EPP) | beta | CIS scanner
Medion/Lifetec/Tevion/Cytron | MD 9848 | Parport (EPP) | alpha | 300 dpi CCD scanner
MD/LT 935x | Parport (EPP) | beta | CIS scanner
MD/LT 985x | Parport (EPP) | beta | CIS scanner
MD/LT 9890 | Parport (EPP) | beta | CIS scanner
Targa | Funline TS12 EP | Parport (EPP) | beta | CIS scanner
Funline TS6 EP | Parport (EPP) | beta | CIS scanner
Trust | Easy Connect 9600+ | Parport (EPP) | beta | CIS scanner
Viviscan | Compact II | Parport (EPP) | alpha | 300 dpi CCD scanner
Cybercom | 9352 | Parport (EPP) | alpha | 300 dpi CCD scanner
Gallery | 4800 | Parport (EPP) | alpha | 300 dpi CCD scanner

### Backend: mustek_usb (v1.0-16)

Link(s): http://www.meier-geinitz.de/sane/mustek_usb-backend/
Manual page: sane-mustek_usb
Comment: Only the USB scanners mentioned below are supported. For BearPaws, look at the Plustek, MA-1509, and gt68xx backends.

Manufacturer | Model | Interface | Status | Comment
--- | --- | --- | --- | ---
Mustek | ScanExpress 600 CU | USB | stable |
ScanExpress 1200 CU | USB | stable |
ScanExpress 1200 CU Plus | USB | stable |
ScanExpress 1200 UB | USB | stable | For the UB Plus, see gt68xx backend
Trust | Compact Scan USB 19200 | USB | stable | Mustek 1200 UB compatible

### Backend: nec (v0.12)

Link(s): http://www5a.biglobe.ne.jp/~saetaka/
Manual page: sane-nec

Manufacturer | Model | Interface | Status | Comment
--- | --- | --- | --- | ---
NEC | PC-IN500/4C | SCSI | beta | PC-IN500/4C was sold only in JAPAN

### Backend: pie (v1.0)

Link(s): http://www.munton.demon.co.uk/sane
Manual page: sane-pie

Manufacturer | Model | Interface | Status | Comment
--- | --- | --- | --- | ---
Devcom | 9636PRO | SCSI | stable |
9636S | SCSI | untested |
9630S | SCSI | untested |
PIE | ScanAce 1236S | SCSI | stable |
ScanAce 1230S | SCSI | stable |
ScanAce II | SCSI | untested |
ScanAce III | SCSI | untested |
ScanAce Plus | SCSI | untested |
ScanAce II Plus | SCSI | untested |
ScanAce III Plus | SCSI | untested |
ScanAce V | SCSI | untested |
ScanAce ScanMedia | SCSI | untested |
ScanAce ScanMedia II | SCSI | untested |
ScanAce 630S | SCSI | untested |
ScanAce 636S | SCSI | untested |
Adlib | JetScan630 | SCSI | stable |
JetScan636PRO | SCSI | untested |

### Backend: plustek (v0.45)

Link(s): http://www.gjaeger.de/scanner/plustek.html
Manual page: sane-plustek

Manufacturer | Model | Interface | Status | Comment
--- | --- | --- | --- | ---
Plustek | OpticPro 4800P | Parport (SPP, EPP) | stable |
OpticPro 4830P | Parport (SPP, EPP) | stable |
OpticPro 600P/6000P | Parport (SPP, EPP) | stable |
OpticPro 4831P | Parport (SPP, EPP) | stable |
OpticPro 9630P | Parport (SPP, EPP) | stable |
OpticPro 9630PL | Parport (SPP, EPP) | stable | use driver-switch mov=1
OpticPro 9600P | Parport (SPP, EPP) | stable |
OpticPro 1236P | Parport (SPP, EPP) | stable | reported as OpticPro 12000P/96000P
OpticPro 12000P/96000P | Parport (SPP, EPP) | stable |
OpticPro 9636P | Parport (SPP, EPP) | stable | use driver-switch mov=4
OpticPro 9636P+/Turbo | Parport (SPP, EPP) | stable | use driver-switch mov=3
OpticPro 9636T | Parport (SPP, EPP) | stable |
OpticPro 12000T | Parport (SPP, EPP) | stable |
OpticPro AI3 | Parport (SPP, EPP) | beta | use driver-switch mov=5, poor picture quality
OpticPro P8 | Parport | untested |
OpticPro P12 | Parport (SPP, EPP) | stable |
OpticPro PT12 | Parport (SPP, EPP) | stable |
OpticPro U12 | USB | stable | NOTE: Devices with product ID 0x0001 are not supported!
OpticPro UT12 | USB | stable | Note: Devices with product ID 0x0001 are not supported!
OpticPro UT16 | USB | stable |
OpticPro U24 | USB | stable |
OpticPro UT24 | USB | stable |
OpticPro 19200S | SCSI | unsupported | rebadged Artec AM12S (supported by Artec Backend)
Primax | Colorado 4800 | Parport (SPP, EPP) | untested | same as OpticPro 4800P
Compact 4800 Direct | Parport (SPP, EPP) | stable | use driver-switch mov=2
Compact 4800 Direct-30 | Parport (SPP, EPP) | untested | same as OpticPro 4830P
Compact 9600 Direct-30 | Parport (SPP, EPP) | stable | same as OpticPro 9630P
Genius | Colorpage Vivid III V2 | Parport (SPP, EPP) | stable | Reported as PT12
Colorpage Vivid Pro II Film | Parport (SPP, EPP) | stable | Reported as OP9636T/12000T
Colorpage HR6 V2 | USB | stable |
Colorpage HR7 | USB | stable |
Colorpage HR6A | USB | untested |
Colorpage HR7LE | USB | untested |
Colorpage HR6X | USB | untested |
Aries | Scan-It Pro 4800 | Parport (SPP, EPP) | stable | use driver-switch mov=2
BrightScan | BrighScan OpticPro | Parport (SPP, EPP) | stable | Reported as P12
Mustek | BearPaw 1200 | USB | stable |
BearPaw 2400 | USB | stable | Mostly OK
Hewlett-Packard | ScanJet 2100C | USB | stable |
ScanJet 2200C | USB | stable |
Epson | Perfection 1250 | USB | stable |
Perfection 1250Photo | USB | stable |
Perfection 1260 | USB | stable |
Perfection 1260Photo | USB | stable |
Umax | UMAX 3400 | USB | stable |
UMAX 3450 | USB | stable | TPA not supported
UMAX 5400 | USB | stable |
Compaq | S4-100 | USB | stable | Identical to UMAX 3400
Canon | CanoScan N650U/N656U | USB | stable |
CanoScan N1220U | USB | beta | Poor color picture quality
CanoScan N670U/N676U | USB | beta | Poor color picture quality
CanoScan N1240U | USB | beta | Poor color picture quality
CanoScan LiDE20 | USB | beta | Poor color picture quality
CanoScan LiDE30 | USB | beta | Poor color picture quality

### Backend: ricoh

Manual page: sane-ricoh

Manufacturer | Model | Interface | Status | Comment
--- | --- | --- | --- | ---
Ricoh | Ricoh IS50 | SCSI | alpha |
Ricoh IS60 | SCSI | alpha |

### Backend: s9036

Manual page: sane-s9036

Manufacturer | Model | Interface | Status | Comment
--- | --- | --- | --- | ---
Siemens | 9036 Flatbed scanner | SCSI | alpha |

### Backend: sceptre (v1.0-10)

Link(s): http://fz.eryx.net/sane/
Manual page: sane-sceptre

Manufacturer | Model | Interface | Status | Comment
--- | --- | --- | --- | ---
Sceptre | Vividscan S1200 | SCSI | beta |
Komodo | S1200 | SCSI | untested | rebadged Sceptre S1200

### Backend: sharp (v0.32)

Link(s): http://www.satzbau-gmbh.de/staff/abel/sane-sharp.html
Manual page: sane-sharp

Manufacturer | Model | Interface | Status | Comment
--- | --- | --- | --- | ---
Sharp | JX-610 | SCSI | beta |
JX-250 | SCSI | beta |
JX-320 | SCSI | beta |
JX-325 | SCSI | untested |
JX-330 | SCSI | beta |
JX-350 | SCSI | beta |

### Backend: sm3600 (v0.1)

Link(s): http://sm3600.sourceforge.net/
Manual page: sane-sm3600

Manufacturer | Model | Interface | Status | Comment
--- | --- | --- | --- | ---
Microtek | ScanMaker 3600 | USB | alpha | works
ScanMaker 3700 | USB | alpha | works
ScanMaker 3750 | USB | alpha | works (told)

### Backend: SnapScan (v1.4)

Link(s): http://snapscan.sourceforge.net/
Manual page: sane-snapscan
Comment: Supported bit depths: 24 bit (color), 8 bit (gray)

Manufacturer | Model | Interface | Status | Comment
--- | --- | --- | --- | ---
AGFA | SnapScan 300 | SCSI | beta |
SnapScan 310 | SCSI | beta |
SnapScan 600 | SCSI | stable | Optional ADF supported.
Arcus 1200 | SCSI | stable | Optional transparency unit supported.
SnapScan 1236s | SCSI | stable | Optional ADF and transparency unit supported.
SnapScan 1236u | USB | stable | Optional ADF and transparency unit supported.
SnapScan 1212u | USB | stable |
SnapScan e10 | USB | stable |
SnapScan e20 | USB | stable |
SnapScan e25 | USB | stable |
SnapScan e26 | USB | stable |
SnapScan e40 | USB | stable |
SnapScan e42 | USB | stable |
SnapScan e50 | USB | stable | Optional tranparency unit supported
SnapScan e52 | USB | stable | Optional tranparency unit supported
SnapScan e60 | USB | untested |
Benq | 300f | SCSI | stable |
310s | SCSI | stable |
610s | SCSI | stable |
610plus | SCSI | stable |
620s | SCSI | stable |
310u | USB | stable |
320u | USB | stable |
340u | USB | stable |
620u | USB | stable | Optional tranparency unit supported
640u | USB | stable | Optional tranparency unit supported
640bu | USB | stable |
1240 | USB | stable | Optional tranparency unit supported
3300 | USB | stable |
4300 | USB | stable |
5000 | USB | beta |
5300 | USB | alpha | Problems with firmware upload reported
Guillemot / Hercules | Maxi Scan A4 Deluxe (SCSI) | SCSI | stable | Rebadged SnapScan 310s.
Scan@home Touch 1248 (USB) | USB | stable | Rebadged Benq 3300.
Maxi Scan A4 USB 640U | USB | stable | Rebadged Benq 640U.
Mitsubishi | Diamondview 648UT | USB | stable | Rebadged Benq 320u.
Diamondview 650U | USB | stable | Rebadged Benq 4300.
Epson | Perfection 660 | USB | beta |

### Backend: sp15c (v1.12)

Manual page: sane-sp15c

Manufacturer | Model | Interface | Status | Comment
--- | --- | --- | --- | ---
Fujitsu | SP15C | SCSI | beta |

### Backend: st400 (v1.6)

Link(s): http://www.informatik.uni-oldenburg.de/~ingo/sane/
Manual page: sane-st400

Manufacturer | Model | Interface | Status | Comment
--- | --- | --- | --- | ---
Siemens | ST400 | SCSI | alpha | 6 bit gray
ST800 | SCSI | alpha | 6 bit gray

### Backend: tamarack (v0.5)

Manual page: sane-tamarack

Manufacturer | Model | Interface | Status | Comment
--- | --- | --- | --- | ---
Tamarack | Artiscan 6000C | SCSI | beta | 3 pass, 300 DPI
Artiscan 8000C | SCSI | beta | 3 pass, 400 DPI
Artiscan 12000C | SCSI | beta | 3 pass, 600 DPI

### Backend: teco1 (v1.0-9)

Link(s): http://fz.eryx.net/sane/#teco
Manual page: sane-teco1

Manufacturer | Model | Interface | Status | Comment
--- | --- | --- | --- | ---
Relisys | RELI 2412 | SCSI | stable | sub model VM3530+
AVEC 2400 | SCSI | stable | sub model VM3520
RELI 4830 | SCSI | beta | sub model VM4542
AVEC 2412 | SCSI | untested | sub model VM3520+
AVEC 4800 | SCSI | untested | sub model VM4530
AVEC 4816 | SCSI | untested | sub model VM4530+
RELI DS6 | SCSI | untested | sub model VM3420
RELI DS15 | SCSI | untested | sub model VM3440
RELI 2400 | SCSI | untested | sub model VM3530
RELI 4816 | SCSI | untested | sub model VM4540
RELI 9600 | SCSI | untested | sub model VM6530
RELI 9612 | SCSI | untested | sub model VM6530*
RELI 9624 | SCSI | untested | sub model VM6530+
RELI 9630 | SCSI | untested | sub model VM6540
Actown | ACT Scan I 30 | SCSI | untested | sub model VM3520A
Dextra | DF-600P | SCSI | beta | sub model VM3510
DF-1200T+ | SCSI | untested | sub model VM3530+
DF-4830T | SCSI | untested | sub model VM4542
DF-9624 | SCSI | untested | sub model VM6530+

### Backend: teco2 (v1.0-5)

Link(s): http://fz.eryx.net/sane/#teco2
Manual page: sane-teco2

Manufacturer | Model | Interface | Status | Comment
--- | --- | --- | --- | ---
Relisys | AVEC Super 3 | SCSI | untested | sub model VM3575
AVEC II S3 | SCSI | alpha | sub model VM3564
SCORPIO Super 3 | SCSI | alpha | sub model VM3575
APOLLO Express 3 | SCSI | alpha | sub model VM356A
APOLLO Express 6 | SCSI | beta | sub model VM6565
SCORPIO Pro | SCSI | beta | sub model VM6575
SCORPIO Pro-S | SCSI | untested | sub model VM6586
Primax | Jewel 4800 | SCSI | alpha | sub model VM356A
Profi 9600 | SCSI | alpha | sub model VM6575
Profi 19200 | SCSI | beta | sub model VM6586

### Backend: teco3 (v1.0-1)

Link(s): http://fz.eryx.net/sane/#teco3
Manual page: sane-teco3

Manufacturer | Model | Interface | Status | Comment
--- | --- | --- | --- | ---
Relisys | Infinity Scorpio | SCSI | beta | sub model VM3552
Plustek | OpticPro 2400SP | SCSI | untested | sub model VM3552
PIOTECH | Splendeur 3024 | SCSI | beta | sub model VM3552
Trust | Imagery 2400 SP | SCSI | beta | sub model VM3552
Imagery 4800 SP+ | SCSI | beta | sub model VM3552
Imagery 9600 SP | SCSI | untested | sub model VM3552

### Backend: umax (v1.0-37)

Link(s): http://www.rauch-domain.de/sane-umax/index.html
Manual page: sane-umax

Manufacturer | Model | Interface | Status | Comment
--- | --- | --- | --- | ---
UMAX | Vista S6 | SCSI | stable | OK
Vista S6E | SCSI | stable | OK
UMAX S-6E | SCSI | stable | OK
UMAX S-6EG | SCSI | stable | OK
Vista-S8 | SCSI | stable | OK
Supervista S-12 | SCSI | stable | OK
UMAX S-12 | SCSI | stable | OK
UMAX S-12G | SCSI | stable | OK
Astra 600S | SCSI | stable | OK
Astra 610S | SCSI | stable | OK
Astra 1200S | SCSI | stable | OK
Astra 1220S | SCSI | stable | OK
Astra 2100S | SCSI | stable | OK
Astra 2200 (SU) | SCSI | stable | OK
Astra 2200 (SU) | USB | stable | OK, needs USB control messages
Astra 2400S | SCSI | stable | OK
Astra 6400 | IEEE-1394 | unsupported | will propably work one day
Astra 6450 | IEEE-1394 | unsupported | will propably work one day
Astra MX3 | SCSI | stable | OK
Astra MX3 | USB | stable | OK, needs USB control messages
Mirage D-16L | SCSI | stable | OK
Mirage II | SCSI | stable | OK
Mirage IIse | SCSI | untested | may work, please test and give feedback
PSD | SCSI | stable | OK
PowerLook | SCSI | untested | may work, please test and give feedback
PL-II | SCSI | untested | may work, please test and give feedback
PowerLook III | SCSI | stable | OK
PowerLook 270 | SCSI | unsupported | incompatible
PowerLook 270plus | SCSI | unsupported | incompatible
PowerLook 1100 | IEEE-1394 | unsupported | will propably work one day
PowerLook 2000 | SCSI | untested | may work, please test and give feedback
PowerLook 2100XL | SCSI | stable | OK
PowerLook 3000 | SCSI | stable | OK
Gemini D-16 | SCSI | stable | OK
UMAX VT600 | SCSI | untested | may work, please test and give feedback
Vista-T630 | SCSI | stable | OK for some firmwareversions, on others only lineart OK
UC 630 | SCSI | stable | Version 2.8 OK, others only lineart OK
UG 630 | SCSI | stable | OK
UG 80 | SCSI | stable | OK
UC 840 | SCSI | stable | Version 1.6 OK, others only lineart OK
UC 1200S | SCSI | untested | may work, please test and give feedback
UC 1200SE | SCSI | stable | Version 3.0 OK, others unknown
UC 1260 | SCSI | stable | Version 1.6 OK, others unknown
Linotype Hell | Jade | SCSI | stable | OK, SCSI-ID=LinoHell Office
Jade | SCSI | stable | OK, SCSI-ID=LinoHell JADE
Jade2 | SCSI | stable | OK, SCSI-ID=LinoHell Office2
Saphir | SCSI | untested | support disabled until tested - please contact author
Saphir2 | SCSI | stable | OK, SCSI-ID=LinoHell SAPHIR2
Saphir3 | SCSI | stable | OK, SCSI-ID=LinoHell SAPHIR3
Saphir Ultra | SCSI | untested | support disabled until tested - please contact author
Saphir Ultra II | SCSI | untested | support disabled until tested - please contact author
Saphir HiRes | SCSI | untested | support disabled until tested - please contact author
Opal | SCSI | untested | support disabled until tested - please contact author
Opal Ultra | SCSI | untested | support disabled until tested - please contact author
Linoscan 1400 | SCSI | stable | OK, SCSI-ID=HDM LS4H1S
Vobis | Highscreen Scanboostar Premium | SCSI | stable | OK, SCSI-ID=LinoHell Office2
EDGE | KTX-9600US | SCSI | untested | no feedback
Epson | Perfection 600 | SCSI | stable | OK, SCSI-ID=EPSON Perfection600
Escom | Image Scanner 256 | SCSI | stable | OK, SCSI-ID=UMAX UG 80
Escort | Galleria 600 | SCSI | untested | untested, SCSI-ID=ESCORT Galleria 600S
Genius | ColorPage-HR5 (Pro) | SCSI | stable | OK, SCSI-ID=KYE ColorPage-HR5
Nikon | AX-110 / Scantouch 110 | SCSI | untested | may work, please test and give feedback
AX-210 | SCSI | stable | OK

### Backend: umax1220u (v1.0.1)

Link(s): http://umax1220u-sane.sourceforge.net
Manual page: sane-umax1220u

Manufacturer | Model | Interface | Status | Comment
--- | --- | --- | --- | ---
UMAX | Astra 1220U | USB | stable | OK
Astra 2000U | USB | beta | Sort of scans, but colors all messed up.
Astra 2200U | USB | unsupported | Incompatible.

### Backend: umax_pp (v1)

Link(s): http://umax1220p.sourceforge.net/
Manual page: sane-umax_pp

Manufacturer | Model | Interface | Status | Comment
--- | --- | --- | --- | ---
UMAX | Astra 1220P | Parport (EPP) | beta | works
Astra 2000P | Parport (EPP) | beta | works
Astra 1600P | Parport (EPP) | beta | works
Astra 610P | Parport (EPP) | unsupported | don't work (yet)
Hewlett-Packard | Scanjet 3200C | Parport (EPP) | beta | works (relabelled 1220P and 2000P)

### Backend: unsupported (v2003-05-25)

Link(s): http://www.meier-geinitz.de/sane/misc/unsupported.html
Comment: The devices mentioned here are not supported by any SANE backend. However, there may be links to information about them or stand-alone programs.

Manufacturer | Model | Interface | Status | Comment
--- | --- | --- | --- | ---
Artec/Ultima | 1236 USB | USB | unsupported | Unsupported. Vendor/product 0x05d8/0x4001. Same id as one of the Artec Ultima 2000 scanners. More information (e.g. /proc/bus/usb/devices output) would be appreciated.
E+ Pro | USB | unsupported | Not supported. Vendor/product 0x05d8/0x4004. /proc/bus/usb/devices output is available. Chipset is GT6816. May work with the gt68xx backend after some work in the source code.
AM12e+ | Parport | unsupported | Unsupported. Chipset unknown. Maybe similar to SCSI version or as6e?
Ultima 2000 (0x4001) | USB | unsupported | Same name, but different ids: vendor/product 0x05d8/0x4001 is not supported. Chips: WINBOND W6662CF, POWERVISION PV108630-C2L, ATC 93LC46 (EEPROM?). The chips look similar to that reported on the umax1220u page. The scanner with product id 0x4002 is supported by the gt68xx backend.
Avision | iVina FB1600 | USB | unsupported | Not supported. Is reported to use GeneScan II GL646 chipset. Same as UMAX Astra 4500.
iVina FB1800 | USB | unsupported | Not supported. No chipset information available. Same as UMAX Astra 4700.
iVina FB2400 | USB | unsupported | Not supported. No chipset information available. Same as UMAX Astra 6700.
Boeder | Sm@rtScan Office | Parport USB | unsupported | Unsupported. Vendor/product 0x5cb, 0x1483. According to linux-usb.org that's the same ids as Trust Trust CombiScan 19200. The vendor is PowerVision Technologies, Inc. Maybe also a PV8630 as in the UMAX 1200U?
Brother | MFC 4600 | Parport USB | unsupported | Unsupported. However there is a project to support this scanner/printer/fax combination. See link.
MFC 5100c | Parport USB | unsupported | Unsupported. Some information is available (see link). See also MFC 4600.
MFC 6800 | USB | unsupported | Unsupported. A backend is under development (see link). Vendor/product 0x04f9/0x0111. See also MFC 4600.
Canon | CanoScan D646U | USB | unsupported | Probably not supported. USB Vendor/product 0x04a9/0x220b. /proc/bus/usb/devices output available. Maybe Genesys USB bridge + LM9830? Maybe could be supported by canon630u backend? See link for more information.
CanoScan D660U | USB | unsupported | Unsupported. Vendor/product 0x04a9/0x2208. See link for more information.
CanoScan D1250U2 | USB | unsupported | Not supported. However, someone started working on this scanner and some information is available (see link).
LiDE 50 | USB | unsupported | Probably not supported. Chipset probably Genesys. Some information is available.
CanoScan FB620U | USB | unsupported | Probably not supported. Vendor/product 0x4a9/0x2202. Some information is available.
CanoScan FB1210U | USB | unsupported | Not supported. Vendor/product 0x4a9/0x2205. However, a stand-alone program for FreeBSD is available.
FS4000 | USB SCSI | unsupported | Not supported. USB Vendor/product 0x04a9/0x3042. May work with Vuescan. Maybe SCSI over USB.
Compaq | S200 | USB | unsupported | Not supported. 2400x1200 dpi. Vendor=0x049f, Product=0x0021. One bulk-in, one bulk-out and one interrupt endpoint. Type-number: U0001-HB21, another type nr on the inside: 75100512-00
S4 100 | USB | unsupported | Not supported. Vendor=0x049f, Product=0x001a.
E-Lux | j-6121 | Parport | unsupported | Probably unsupported. Sold 1998. Same as E-Lux j-6121.
Enhans | j-6121 | Parport | unsupported | Probably unsupported. Sold 1998. Same as E-Lux j-6121.
Fujitsu | fi-4010C | USB | unsupported | Unsupported. Vendor/product: 0x04c5, 0x1029. Maybe similar to fi-4220C?
fi-4110CU | USB | unsupported | Unsupported. Vendor/product unknown. Maybe similar to fi-4220C?
Genius | ColorPage HR7X Slim | USB | unsupported | Not supported. Vendor/product: 0x0458/0x2018. Is reported to use the GL646 chipset. See link for more details.
Colorpage Vivid III | USB | unsupported | Not supported. Vendor/product: 0x07b3/0x0001. Same ids as the Plustek OpticPro 1212U and older U12/UT12. Maybe the same chips are used?
Hewlett-Packard | Photo Scanner 1000 | USB | unsupported | Not supported by SANE. However, it's detected as mass storage device so just mounting it is reported to work. See link for devices data.
ScanJet 2300C | USB | unsupported | Unsupported. Vendor/product 0x03f0/0x0901. See link for devices output.
ScanJet 3500c | USB | unsupported | Unsupported. Seems to use RealTek RTS8801C2-6. Vendor/Product ID 0x03F0/0x2205. See link and other Scanjet 35x0c entries.
ScanJet 3530c | USB | unsupported | Unsupported. Chipset is Realtek RTS8801C2-6. Vendor/Product ID 0x03F0/0x2005. See link and other Scanjet 35x0c entries.
ScanJet 3570c | USB | unsupported | Unsupported. Probably Realtek RTS8801C2-6, same ids as Scanjet 3530c. Has a TA. Vendor/product id 0x03F0/0x2005. See link and other Scanjet 35x0c entries.
ScanJet 3570cxi | USB | unsupported | Unsupported. See 3570c.
ScanJet 4400C | USB | unsupported | Not supported. Seems to use the same chip as the 4470C. A stand-alone program for that scanner is available.
ScanJet 4470C | USB | unsupported | Not supported. However, a stand-alone program is available.
ScanJet 4500C | USB | unsupported | Not supported. Landscape scanner. Same as 5500C, but without ADF.
ScanJet 4570C | USB | unsupported | Not supported. Portrait scanner with TA, similar to 4500C. Same as 5550C, but without ADF. Vendor/product: 0x03f0/0x1305. Not much is known about this scanner. The manual says: 4500c and 5500c series.
ScanJet 5500C | USB | unsupported | Not supported. Same as 4500C, but with ADF.
ScanJet 5550C | USB | unsupported | Not supported. Same as 4570C, but with ADF.
ScanJet 8200C | USB | unsupported | Not supported. SCSI optional. Includes TA. No further information.
ScanJet 8250C | USB | unsupported | Not supported. SCSI optional. Includes ADF and TA. Probably similar to 8200C. No further information.
ScanJet 8290C | USB | unsupported | Not supported. SCSI optional. Includes ADF and TA. Similar to 8200C? No further information.
IBM | ADF Color Scanner | Proprietary | unsupported | Unsupported. Uses proprietary ISA card. Maybe the same as the Plustek Spectra ADF?
Lexmark | X83 | USB | unsupported | Unsupported. Vendor/product 0x043d/0x003d. It does use a firmware (in some sort of eeprom(?), at least it's not necesary tu upload it). Probably parport over USB. Seems to use PAL16R8 and GL640USB_40SOJ chips.
Medion/Lifetec/Tevion/Cytron | MD 5345 | USB | unsupported | Probably unsupported. Vendor/product 0x0461/0x0377. The vendor id is Primax. Same as MD 6228. Maybe the same as Primax Slim-Line 1200.
MD 6228 | USB | unsupported | Probably unsupported. Vendor/product 0x0461/0x0377. The vendor id is Primax. Same as MD 5345. Maybe the same as Primax Slim-Line 1200.
Microtek | ScanMaker 3630 | USB | unsupported | Unsupported. Doesn't seem to be compatible to 3600 series, see link.
ScanMaker 3800 | USB | unsupported | Unsupported. Vendor/Product ids: 0x05da/0x30ce. Seems to be based on the SQ Scan08 chip. See link to spec sheet.
ScanMaker 4800 | USB | unsupported | Unsupported. Vendor/Product ids: 0x05da/0x30cf. Looks very similar to the ScanMaker 3800. Maybe the same chip is used?
ScanPort 3000 | USB | unsupported | Unsupported. Vendor/Product ids: 0x04a7/0x0224. Seems to use Realtek RTS8801B. Same as Visioneer OneTouch 4800. See link for details.
Mustek | BearPaw 2400 TA Pro | USB | unsupported | Not supported. See link for some information.
BearPaw 4800 TA Pro | USB | unsupported | Not supported. See link for some information.
1800 A3 Pro-1 | USB | unsupported | Not supported but someone wants to start writing a backend. See link. Vendor/Product ids: 0x055f/0x0401. No information about this scanner on any Mustek website.
P 3600 A3 Pro | USB | unsupported | Not supported. Maybe similar to the 1800 A3 Pro-1?. See link.
ScanExpress CardSmart | USB | unsupported | Probably unsupported. USB business card scanner. Maybe works as USB storage device?
ScanExpress 600 USB | USB | unsupported | Unsupported. Vendor/Product 0x055f/0x873. Programming information is available.
ScanExpress 1200 USB | USB | unsupported | Unsupported. Vendor/Product 0x055f/0x0003. Programming information is available.
ScanExpress 1200 USB Plus | USB | unsupported | Unsupported. Vendor/Product 0x055f/0x0007.
BearPaw 1248CU | USB | unsupported | Probably unsupported. No details known.
2400 M | USB | unsupported | Probably unsupported. No details known.
ScanExpress 12000 P | Parport | unsupported | Not supported. Asic 1505/05.
Paragon 600 II ED/EP | Parport | unsupported | Not supported. SCSI over Parport.
ScanMagic 9636P | Parport | unsupported | Probably not supported. Same as Mustek 12000 P?. ASIC 1505.
PIE | Primefilm 1800u | USB | unsupported | Not supported. Vendor/product 0x05e3/0x0120. Is reported to use GeneScan II GL841 chipset.
Plustek | OpticPro 1212U | USB | unsupported | Vendor/product: 0x07b3/0x0001. Same ids as early U12/UT12 models, maybe the same chip?
OpticPro U12/UT12 | USB | unsupported | All devices using product ID 0x0001 are not supported, for others see Plustek backend. The older models seem to use a P98003 parallel port ASIC and a GenesysLogic parport-over USB brigde. The P98003 is also used by the P12 and PT12 models.
OpticPro A3U | USB | unsupported | Uses Plustek ASIC P99002
OpticPro S6 | USB | unsupported | Uses RealTek chipset (RTL8801D)
OpticPro S12 | USB | unsupported | Uses the Genesys Logic GL646 chipset.
OpticPro S24 | USB | unsupported | Uses the Genesys Logic GL646 chipset.
Spectra ADF | Proprietary | unsupported | Unsupported. Uses proprietary ISA card that also provides power and is labelled GPS-1 PAGE-A from Taiwan. Other labels on the scanner include ADF Color Scanner and SF600AS. Maybe the same as the IBM ADF Color Scanner?
Primax | Colorado Direct 9600 | Parport | unsupported | Not supported. However, a stand-alone program is available.
Colorado Direct 600 | Parport | unsupported | Not supported. However, a stand-alone program is available.
Colorado 2400U | USB | unsupported | Probably unsupported. ASIC EICI 10440A. Vendor/product 0x461/0x346. May work with viceo backend(?), see link.
Primascan Colorado 2600u | USB | unsupported | Unsupported. See Visioneer Primascan Onetouch 4800.
Slim-Line 1200 | USB | unsupported | Probably unsupported. Vendor/product maybe 0x0461/0x0377. Maybe the same as Medion MD 6228/MD 5345
Prolink | Winscan Pro 2448U | USB | unsupported | Not supported. Some information is available. Vendor=0x06dc product=0x0014. Is reported to use an RealTek RTS8801 chipset.
Reflecta | DigitDia 3600 | USB IEEE-1394 | unsupported | Probably unsupported. Film scanner that can scan directly from the magazine.
Syscan | TravelScan 460/464 | USB | unsupported | Not supported. Some information is available. May work with the Plustek backend in future.
Spot Technology | Maxiscan A4 | proprietary | unsupported | Not supported until now. Work on a backend has started, see link for more information.
ScanTak 2c | SCSI | unsupported | Not supported. See link for more information.
ScanTak 3c | SCSI | unsupported | Not supported. See link for more information.
Trust | CombiScan 19200 | Parport USB | unsupported | Unsupported. Vendor/product 0x5cb, 0x1483 according to linux-usb.org. Same ids as Boeder Sm@rtScan Office. The vendor is PowerVision Technologies, Inc. Maybe also a PV8630 as in the UMAX 1200U?
UMAX | Astra 4500 | USB | unsupported | Not supported. Vendor/product 0x0638/0x0a10. Is reported to use GeneScan II GL646 chipset. Same as Avision iVina FB1600.
Astra 4700 | USB | unsupported | Not supported. Is reported to use a Genesys Logic GL660USB chip (Parport to USB converter, see link) and the Avision B2 chipset. Same as Avision iVina FB1800.
Astra 6700 | USB | unsupported | Not supported. No chipset information available. Same as Avision iVina FB2400.
Visioneer | 6200 | USB | unsupported | Not supported. Is reported to use the E5 chipset. Uses a Primax ID. See link for some details. Looks similar to Primascan Colorado 2600u.
Onetouch 4400 | USB | unsupported | Not supported. Is reported to use LM9832 (or LM9830 + E5) (=GL640usb)???. Same scanner as Primax/visioneer Primascan Colorado 2600u. Vendor/product 0x0461/0x0347 (Primax!). One bulk-in and one bulk-out ep. See link for more details. Maybe it can be supported by the canon630u backend?
OneTouch 4800 USB | USB | unsupported | Unsupported. Vendor/Product ids: 0x04a7/0x0224. Seems to use Realtek RTS8801B. Same as Microtek Scanport 3000. See link for details.
OneTouch 5300 USB | USB | unsupported | Not supported. Vendor/product ids 0x04a7/0x0226. See link for output of /proc/bus/usb/devices. The output looks very similar to that of the 8920.
Onetouch 8920 | USB | unsupported | Not supported. Same as 8700 and 8900 but includes a TA. Uses a Primax ID. See link for output of /proc/bus/usb/devices.
Primascan Colorado 2600u | USB | unsupported | Not supported. See Visioneer Onetouch 4400.

## Still Cameras

Backends: dc25, dc210, dc240, dmc

### Backend: dc25 (v1.2)

Link(s): mailto:peter@fales-lorenz.net
Manual page: sane-dc25

Manufacturer | Model | Interface | Status | Comment
--- | --- | --- | --- | ---
Kodak | DC25 | Serial port | beta |
DC20 | Serial port | beta | DC-20 untested by author but reported to work

### Backend: dc210 (v0.0)

Link(s): mailto:peter@fales-lorenz.net
Manual page: sane-dc210

Manufacturer | Model | Interface | Status | Comment
--- | --- | --- | --- | ---
Kodak | DC210 | Serial port | alpha |

### Backend: dc240 (v0.0)

Link(s): mailto:peter@fales-lorenz.net
Manual page: sane-dc240

Manufacturer | Model | Interface | Status | Comment
--- | --- | --- | --- | ---
Kodak | DC240 | Serial port | alpha |

### Backend: dmc (v1.0)

Manual page: sane-dmc

Manufacturer | Model | Interface | Status | Comment
--- | --- | --- | --- | ---
Polaroid | DMC | SCSI | stable |

## Video Cameras

Backends: qcam

### Backend: qcam

Manual page: sane-qcam

Manufacturer | Model | Interface | Status | Comment
--- | --- | --- | --- | ---
Connectix | Color QuickCam | Parport | alpha | Require root privileges.
Greyscale QuickCam | Parport | alpha | Require root privileges. Partly working.

## APIs

Backends: gphoto2, pint, pnm, test, v4l

### Backend: gphoto2 (v0.0)

Link(s): mailto:peter@fales-lorenz.net
Manual page: sane-gphoto2
Status: beta
Description: Multiple cameras supported by the gphoto2 libraries
Comment: The long-term plan is to support all the cameras supported by the gphoto2 libraries (currently over 140 models). However, at this stage, only a han dful of cameras are definitely known to work with SANE. Other cameras will probably work if the native file format is EXIF or JPEG. Testers welcome!

### Backend: pint

Manual page: sane-pint
Status: alpha
Description: Scanners with the machine-independent PINT interface

### Backend: pnm (v1.0.8)

Link(s): mailto:henning@meier-geinitz.de
Manual page: sane-pnm
Status: beta
Description: Reads PNM files
Comment: Used for debugging frontends

### Backend: test (v1.0-21)

Link(s): http://www.meier-geinitz.de/sane/test-backend/
Manual page: sane-test
Status: stable
Description: Frontend-tester
Comment: Backend for testing frontends. Also serves as example for SANE backend options.

### Backend: v4l (v1.0-2)

Link(s): mailto:henning@meier-geinitz.de
Manual page: sane-v4l
Status: alpha
Description: Interface to Video For Linux API
Comment: Supports video cameras and other devices accessed by the v4l kernel API, e.g. bttv devices.

## Meta Backends

Backends: dll, net

### Backend: dll (v1.0.8)

Link(s): mailto:henning@meier-geinitz.de
Manual page: sane-dll
Status: stable
Description: Dynamic loading of shared-library backends.

### Backend: net (v1.0.10)

Link(s): http://www.penguin-breeder.org/?page=sane-net
Manual page: sane-net
Status: stable
Description: Network access to saned servers
Comment: Can be used to access any scanner supported by SANE over the net.

### Legend:

> Backend:
>   Name of the backend, In parentheses if available: Version of backend/driver; newer versions may be available from their home sites.
>   NEW! means brand-new to the current release of SANE.
> Link(s):
>   Link(s) to more extensive and detailed information, if it exists, or the email address of the author or maintainer.
> Manual Page:
>   A link to the man-page on-line, if it exists.
> Comment:
>   More information about the backend or model, e.g. the level of support and possible problems.
> Manufacturer:
>   Manufacturer, vendor or brand name of the device.
> Model:
>   Name of the the device.
> Interface:
>   How the device is connected to the computer.
> Status:
>   A vague indication of robustness and reliability.
>   - unsupported means the device is not supported at least by this backend. It may be supported by other backends, however.
>   - untested means the device may be supported but couldn't be tested. Be very careful.
>   - alpha means it must do something, but is not very well tested, probably has bugs, and may even crash your system, etc., etc.
>   - beta means it works pretty well, and looks stable and functional, but not bullet-proof.
>   - stable means someone is pulling your leg.
> Description:
>   The scope of application of the backend.

[Back]
This page was last updated on Sun Dec 7 17:23:29 2003