<?php 
/* 
 ----------------------------------------------------------------------
 GLPI - Gestionnaire Libre de Parc Informatique
 Copyright (C) 2003-2008 by the INDEPNET Development Team.
 
 http://indepnet.net/   http://glpi-project.org
 ----------------------------------------------------------------------

 LICENSE

 This file is part of GLPI.

 GLPI is free software; you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
 the Free Software Foundation; either version 2 of the License, or
 (at your option) any later version.

 GLPI is distributed in the hope that it will be useful,
 but WITHOUT ANY WARRANTY; without even the implied warranty of
 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 GNU General Public License for more details.

 You should have received a copy of the GNU General Public License
 along with GLPI; if not, write to the Free Software
 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 ------------------------------------------------------------------------
 */
//zh_CN

$LANG=array();


$LANG["backup"][0]="转储SQL"; 
$LANG["backup"][1]="转储XML"; 
$LANG["backup"][11]="大小"; 
$LANG["backup"][13]="视图/下载"; 
$LANG["backup"][16]="是否确实要重写数据库与文件"; 
$LANG["backup"][17]="是否确实要删除这个文件"; 
$LANG["backup"][18]="是否确实要保存数据库"; 
$LANG["backup"][19]="现在"; 
$LANG["backup"][21]="文件已经存在"; 
$LANG["backup"][22]="Unable to find the byte"; 
$LANG["backup"][23]="Mysql error starting from"; 
$LANG["backup"][24]="Automatic redirection, else click"; 

$LANG["bookmark"][1]="bookmark"; 
$LANG["bookmark"][3]="You have not recorded bookmark yet."; 
$LANG["bookmark"][4]="New bookmark"; 
$LANG["bookmark"][5]="Public bookmarks"; 

$LANG["buttons"][0]="检索"; 
$LANG["buttons"][2]="确定"; 
$LANG["buttons"][3]="分配"; 
$LANG["buttons"][4]="安装"; 
$LANG["buttons"][5]="卸载"; 
$LANG["buttons"][6]="删除"; 
$LANG["buttons"][7]="更新"; 
$LANG["buttons"][8]="添加"; 
$LANG["buttons"][9]="连接"; 
$LANG["buttons"][10]="断开"; 
$LANG["buttons"][11]="下一步"; 
$LANG["buttons"][12]="上一步"; 
$LANG["buttons"][13]="返回"; 
$LANG["buttons"][14]="更新"; 
$LANG["buttons"][15]="日程表"; 
$LANG["buttons"][16]="空白"; 
$LANG["buttons"][18]="全选"; 
$LANG["buttons"][19]="取消"; 
$LANG["buttons"][20]="移动"; 
$LANG["buttons"][21]="恢复"; 
$LANG["buttons"][22]="清除"; 
$LANG["buttons"][23]="展示"; 
$LANG["buttons"][24]="向上"; 
$LANG["buttons"][25]="向下"; 
$LANG["buttons"][26]="添加并关闭"; 
$LANG["buttons"][27]="PDF导去"; 
$LANG["buttons"][28]="SLK导去"; 
$LANG["buttons"][29]="所有PDF导去"; 
$LANG["buttons"][30]="所有SLK导去"; 
$LANG["buttons"][31]="导出"; 
$LANG["buttons"][32]="末端"; 
$LANG["buttons"][33]="开始"; 
$LANG["buttons"][34]="取消"; 
$LANG["buttons"][35]="高级"; 
$LANG["buttons"][36]="基本"; 
$LANG["buttons"][37]="导入"; 
$LANG["buttons"][38]="解锁"; 
$LANG["buttons"][39]="Replace"; 
$LANG["buttons"][40]="Show all"; 
$LANG["buttons"][41]="Activate"; 
$LANG["buttons"][42]="Deactivate"; 
$LANG["buttons"][43]="Browse"; 
$LANG["buttons"][44]="View CSV export"; 
$LANG["buttons"][45]="All CSV export"; 
$LANG["buttons"][46]="Before"; 
$LANG["buttons"][47]="After"; 
$LANG["buttons"][48]="Transfer"; 
$LANG["buttons"][49]="Preserve"; 
$LANG["buttons"][50]="Test"; 
$LANG["buttons"][51]="Save"; 
$LANG["buttons"][52]="Load"; 

$LANG["calendarD"][0]="一"; 
$LANG["calendarD"][1]="二"; 
$LANG["calendarD"][2]="三"; 
$LANG["calendarD"][3]="四"; 
$LANG["calendarD"][4]="五"; 
$LANG["calendarD"][5]="六"; 
$LANG["calendarD"][6]="日"; 

$LANG["calendarDay"][0]="星期天"; 
$LANG["calendarDay"][1]="星期一"; 
$LANG["calendarDay"][2]="星期二"; 
$LANG["calendarDay"][3]="星期三"; 
$LANG["calendarDay"][4]="星期四"; 
$LANG["calendarDay"][5]="星期五"; 
$LANG["calendarDay"][6]="星期六"; 

$LANG["calendarM"][0]="1月"; 
$LANG["calendarM"][1]="2月"; 
$LANG["calendarM"][2]="3月"; 
$LANG["calendarM"][3]="4月"; 
$LANG["calendarM"][4]="5月"; 
$LANG["calendarM"][5]="6月"; 
$LANG["calendarM"][6]="7月"; 
$LANG["calendarM"][7]="8月"; 
$LANG["calendarM"][8]="9月"; 
$LANG["calendarM"][9]="10月"; 
$LANG["calendarM"][10]="11月"; 
$LANG["calendarM"][11]="12月"; 

$LANG["cartridges"][0]="墨盒"; 
$LANG["cartridges"][6]="添加墨盒类型…"; 
$LANG["cartridges"][7]="没有找到墨盒"; 
$LANG["cartridges"][9]="没有墨盒"; 
$LANG["cartridges"][10]="调色剂"; 
$LANG["cartridges"][11]="喷墨机"; 
$LANG["cartridges"][12]="墨盒类型"; 
$LANG["cartridges"][13]="新"; 
$LANG["cartridges"][14]="用过的"; 
$LANG["cartridges"][15]="Worn"; 
$LANG["cartridges"][16]="墨盒"; 
$LANG["cartridges"][20]="新"; 
$LANG["cartridges"][21]="用过的"; 
$LANG["cartridges"][22]="Worn"; 
$LANG["cartridges"][24]="添加日期"; 
$LANG["cartridges"][27]="在"; 
$LANG["cartridges"][29]="用完"; 
$LANG["cartridges"][32]="兼容打印机模型"; 
$LANG["cartridges"][33]="用过的墨盒"; 
$LANG["cartridges"][34]="可用墨盒？"; 
$LANG["cartridges"][35]="Used Cartridges"; 
$LANG["cartridges"][37]="色带"; 
$LANG["cartridges"][39]="页计数"; 
$LANG["cartridges"][40]="平均库存时间"; 
$LANG["cartridges"][41]="平均使用时间"; 
$LANG["cartridges"][42]="平均打印页数"; 

$LANG["central"][0]="欢迎"; 
$LANG["central"][1]="这是控制面板。"; 
$LANG["central"][2]="前"; 
$LANG["central"][4]="没有事件"; 
$LANG["central"][5]="主页"; 
$LANG["central"][6]="注销"; 
$LANG["central"][7]="帮助"; 
$LANG["central"][8]="添加的内容"; 
$LANG["central"][9]="您的case进展中"; 
$LANG["central"][10]="添加新case"; 
$LANG["central"][11]="您即将发生的case"; 
$LANG["central"][12]="个人视图"; 
$LANG["central"][13]="全局视图"; 
$LANG["central"][14]="Group View"; 
$LANG["central"][15]="Tickets in progress for your groups"; 
$LANG["central"][16]="Pending tickets for your groups"; 

$LANG["choice"][0]="否"; 
$LANG["choice"][1]="是"; 

$LANG["common"][0]="没有名称"; 
$LANG["common"][1]="项目"; 
$LANG["common"][2]="ID"; 
$LANG["common"][3]="显示已删除项目"; 
$LANG["common"][4]="网路"; 
$LANG["common"][5]="制造商"; 
$LANG["common"][6]="模板名称"; 
$LANG["common"][7]="选项模板"; 
$LANG["common"][8]="处理模板…"; 
$LANG["common"][9]="添加一块模板…"; 
$LANG["common"][10]="技术负责任"; 
$LANG["common"][11]="限制了视图"; 
$LANG["common"][12]="设定"; 
$LANG["common"][13]="模板"; 
$LANG["common"][14]="模板"; 
$LANG["common"][15]="地点"; 
$LANG["common"][16]="名称"; 
$LANG["common"][17]="类型"; 
$LANG["common"][18]="联系人"; 
$LANG["common"][19]="序列号"; 
$LANG["common"][20]="固定资产编号"; 
$LANG["common"][21]="联系号码"; 
$LANG["common"][22]="模型"; 
$LANG["common"][23]="Operation successful"; 
$LANG["common"][24]="没有选项的元素或非常确定操作"; 
$LANG["common"][25]="批注"; 
$LANG["common"][26]="上次更新日期"; 
$LANG["common"][27]="日期"; 
$LANG["common"][28]="删除了"; 
$LANG["common"][29]="插件"; 
$LANG["common"][30]="添加新项目"; 
$LANG["common"][31]="空白的模板"; 
$LANG["common"][32]="特征"; 
$LANG["common"][33]="共计"; 
$LANG["common"][34]="用户"; 
$LANG["common"][35]="组"; 
$LANG["common"][36]="类别"; 
$LANG["common"][37]="作者"; 
$LANG["common"][38]="Unglobalize"; 
$LANG["common"][39]="复制品元素许多一次作为那里是连接"; 
$LANG["common"][40]="Do you really want to unglobalize this item ?"; 
$LANG["common"][41]="邮件惊动"; 
$LANG["common"][42]="移动电话"; 
$LANG["common"][43]="名字"; 
$LANG["common"][44]="缺省值"; 
$LANG["common"][45]="MB max"; 
$LANG["common"][46]="Vcard"; 
$LANG["common"][47]="Progress"; 
$LANG["common"][48]="Surname"; 
$LANG["common"][49]="None"; 
$LANG["common"][50]="Confirm the deletion ?"; 
$LANG["common"][51]="Complete Name"; 
$LANG["common"][52]="Server"; 
$LANG["common"][53]="List"; 
$LANG["common"][54]="Item not found"; 
$LANG["common"][55]="Are you sure you want to delete this element?"; 
$LANG["common"][56]="Central"; 
$LANG["common"][57]="Title"; 
$LANG["common"][58]="Maximum value"; 
$LANG["common"][59]="Global"; 
$LANG["common"][60]="Active"; 
$LANG["common"][61]="Unknown error"; 
$LANG["common"][62]="Other"; 
$LANG["common"][63]="Error(s)"; 
$LANG["common"][64]="Manager"; 
$LANG["common"][65]="接口"; 
$LANG["common"][66]="All"; 
$LANG["common"][67]="Others"; 
$LANG["common"][68]="Landscape"; 
$LANG["common"][69]="Portrait"; 
$LANG["common"][70]="Item successfully added"; 
$LANG["common"][71]="Item successfully updated"; 
$LANG["common"][72]="Item successfully deleted"; 
$LANG["common"][73]="Item successfully purged"; 
$LANG["common"][74]="Item successfully restored"; 
$LANG["common"][75]="No right to make this item recursive in this entity"; 
$LANG["common"][76]="Public"; 
$LANG["common"][77]="Private"; 
$LANG["common"][78]="Set public"; 
$LANG["common"][79]="Set private"; 

$LANG["computers"][9]="操作系统"; 
$LANG["computers"][10]="OS serial"; 
$LANG["computers"][11]="OS Product ID"; 
$LANG["computers"][12]="从模板添加新计算机"; 
$LANG["computers"][14]="Inserted"; 
$LANG["computers"][21]="CPU"; 
$LANG["computers"][23]="內存类型"; 
$LANG["computers"][24]="內存大小"; 
$LANG["computers"][25]="硬盘大小"; 
$LANG["computers"][36]="硬盘类型"; 
$LANG["computers"][37]="没有连接的显示器。"; 
$LANG["computers"][38]="没有连接的打印机"; 
$LANG["computers"][39]="打印机"; 
$LANG["computers"][40]="显示器"; 
$LANG["computers"][44]="计算机"; 
$LANG["computers"][46]="设备"; 
$LANG["computers"][47]="没有连接的设备"; 
$LANG["computers"][48]="地点更新。 连接的项目被移动了同一个地点。"; 
$LANG["computers"][49]="联系人更新。 连接的项目使用这联系人被更新了。"; 
$LANG["computers"][50]="用户或小组更新。 连接的项目被移动了按同样价值。"; 
$LANG["computers"][51]="更新来源"; 
$LANG["computers"][52]="操作系统版本"; 
$LANG["computers"][53]="服务组装"; 
$LANG["computers"][54]="没有电话连接了"; 
$LANG["computers"][55]="电话"; 
$LANG["computers"][56]="Status updated. The connected items have been updated using this status."; 

$LANG["connect"][0]="直接连接"; 
$LANG["connect"][1]="没连接。"; 
$LANG["connect"][15]="Automatic update of the following items"; 
$LANG["connect"][16]="Warning!! The following items of the two hardwares do not match"; 

$LANG["consumables"][0]="消费品"; 
$LANG["consumables"][1]="在库存"; 
$LANG["consumables"][2]="参考"; 
$LANG["consumables"][6]="添加消费的类型…"; 
$LANG["consumables"][7]="没有消费品发现了"; 
$LANG["consumables"][9]="没有消费品"; 
$LANG["consumables"][12]="Consumable Type"; 
$LANG["consumables"][13]="新的"; 
$LANG["consumables"][15]="用过的"; 
$LANG["consumables"][16]="消费品"; 
$LANG["consumables"][20]="新的"; 
$LANG["consumables"][22]="用过的"; 
$LANG["consumables"][23]="状态"; 
$LANG["consumables"][26]="使用日期"; 
$LANG["consumables"][32]="授予"; 
$LANG["consumables"][35]="Used Consumables"; 
$LANG["consumables"][36]="储蓄地点"; 
$LANG["consumables"][37]="回到目录"; 
$LANG["consumables"][38]="报警阈值"; 

$LANG["devices"][0]="添加一个添加新部件"; 
$LANG["devices"][1]="硬盘"; 
$LANG["devices"][2]="图形卡"; 
$LANG["devices"][3]="网卡"; 
$LANG["devices"][4]="处理器"; 
$LANG["devices"][5]="主板"; 
$LANG["devices"][6]="內存"; 
$LANG["devices"][7]="声卡"; 
$LANG["devices"][12]="添加部件…"; 
$LANG["devices"][17]="选项部件的类型"; 
$LANG["devices"][18]="没有部件发现了"; 
$LANG["devices"][19]="驱动器"; 
$LANG["devices"][20]="控制器"; 
$LANG["devices"][21]="其他部件"; 
$LANG["devices"][22]="机箱"; 
$LANG["devices"][23]="电源"; 
$LANG["devices"][24]="按默认方式"; 
$LANG["devices"][25]="添加部件"; 
$LANG["devices"][26]="删除部件"; 

$LANG["device_case"][0]="大小"; 

$LANG["device_control"][0]="RAID"; 

$LANG["device_drive"][0]="写入"; 
$LANG["device_drive"][1]="速度"; 

$LANG["device_gfxcard"][0]="内存"; 

$LANG["device_hdd"][0]="转/每分"; 
$LANG["device_hdd"][1]="高速缓存"; 
$LANG["device_hdd"][4]="容量"; 

$LANG["device_iface"][0]="流量"; 
$LANG["device_iface"][2]="MAC地址"; 

$LANG["device_moboard"][0]="芯片组"; 

$LANG["device_power"][0]="力量"; 
$LANG["device_power"][1]="ATX"; 

$LANG["device_ram"][1]="频率"; 
$LANG["device_ram"][2]="大小"; 

$LANG["document"][2]="文件"; 
$LANG["document"][3]="标题"; 
$LANG["document"][4]="MIME类型"; 
$LANG["document"][7]="文件类型"; 
$LANG["document"][9]="扩展名"; 
$LANG["document"][10]="图标"; 
$LANG["document"][11]="批准了下载"; 
$LANG["document"][15]="下载"; 
$LANG["document"][16]="添加一个文件"; 
$LANG["document"][17]="添加一个文件类型"; 
$LANG["document"][18]="文件"; 
$LANG["document"][19]="伴生的项目"; 
$LANG["document"][21]="同文件联系在一起"; 
$LANG["document"][22]="当前文件"; 
$LANG["document"][24]="文件删除成功"; 
$LANG["document"][25]="删除文件失败"; 
$LANG["document"][26]="文件是有效。 上载成功。"; 
$LANG["document"][27]="潜在的上载攻击。 或者，太大文件。 出故障的移动的临时文件。"; 
$LANG["document"][28]="注意，文件已经存在。 没完成的上载"; 
$LANG["document"][29]="创建目录失败"; 
$LANG["document"][30]="验证您有正确权限"; 
$LANG["document"][31]="目录为文件不存在"; 
$LANG["document"][32]="未经授权文件类型"; 
$LANG["document"][33]="网链接"; 
$LANG["document"][34]="创建目录"; 
$LANG["document"][35]="上载目录不存在"; 
$LANG["document"][36]="使用FTP安装了文件"; 
$LANG["document"][37]="没有文件有效"; 
$LANG["document"][38]="没被发现的文件"; 
$LANG["document"][39]="文件移动成功"; 
$LANG["document"][40]="文件移动发生了故障"; 
$LANG["document"][41]="文件拷贝成功"; 
$LANG["document"][42]="添加了由"; 
$LANG["document"][43]="未知的文件"; 
$LANG["document"][44]="无效文件名"; 
$LANG["document"][45]="对这个文件的越权存取"; 
$LANG["document"][46]="Failure in the sending of the file (certainly too voluminous)"; 

$LANG["entity"][0]="Entity"; 
$LANG["entity"][1]="Hierarchy"; 
$LANG["entity"][2]="Root entity"; 
$LANG["entity"][3]="Associate to an entity"; 
$LANG["entity"][5]="Automatic computer assignment"; 
$LANG["entity"][6]="Automatic user assignment"; 
$LANG["entity"][7]="tree structure"; 
$LANG["entity"][8]="By entity"; 
$LANG["entity"][9]="Child entities"; 
$LANG["entity"][10]="Select the desired entity"; 
$LANG["entity"][11]="to see the entity and its sub-entities"; 

$LANG["event"][0]="项目(ID)"; 
$LANG["event"][2]="服务"; 
$LANG["event"][3]="级"; 
$LANG["event"][4]="消息"; 
$LANG["event"][18]="域"; 
$LANG["event"][19]="更新"; 
$LANG["event"][20]="没有历史"; 

$LANG["financial"][1]="合同"; 
$LANG["financial"][2]="Has life"; 
$LANG["financial"][3]="财政信息"; 
$LANG["financial"][4]="数字"; 
$LANG["financial"][5]="花费了"; 
$LANG["financial"][6]="合同类型"; 
$LANG["financial"][8]="期间"; 
$LANG["financial"][9]="年"; 
$LANG["financial"][10]="通知"; 
$LANG["financial"][11]="发货case周期性"; 
$LANG["financial"][13]="会计数字"; 
$LANG["financial"][14]="购买购买"; 
$LANG["financial"][15]="保修期间"; 
$LANG["financial"][16]="保修信息"; 
$LANG["financial"][18]="序号"; 
$LANG["financial"][19]="送到单"; 
$LANG["financial"][20]="钳制数字"; 
$LANG["financial"][21]="价值"; 
$LANG["financial"][22]="分期偿还类型"; 
$LANG["financial"][23]="分期偿还期间"; 
$LANG["financial"][24]="添加联系人…"; 
$LANG["financial"][25]="Add Supplier..."; 
$LANG["financial"][26]="Supplier"; 
$LANG["financial"][30]="电传"; 
$LANG["financial"][33]="添加联系人"; 
$LANG["financial"][36]="添加一个合同"; 
$LANG["financial"][42]="商务"; 
$LANG["financial"][43]="工程师"; 
$LANG["financial"][44]="地址"; 
$LANG["financial"][45]="网站"; 
$LANG["financial"][46]="同联系人联系在一起"; 
$LANG["financial"][47]="线性"; 
$LANG["financial"][48]="递减"; 
$LANG["financial"][50]="借出"; 
$LANG["financial"][51]="租赁"; 
$LANG["financial"][52]="谎话"; 
$LANG["financial"][53]="保险"; 
$LANG["financial"][54]="硬件支持"; 
$LANG["financial"][55]="软件支持"; 
$LANG["financial"][56]="服务文档了"; 
$LANG["financial"][57]="月"; 
$LANG["financial"][59]="干预小时"; 
$LANG["financial"][60]="在星期"; 
$LANG["financial"][61]="在星期六"; 
$LANG["financial"][62]="星期天和庆祝天"; 
$LANG["financial"][65]="Associated suppliers"; 
$LANG["financial"][66]="同合同联系在一起"; 
$LANG["financial"][68]="激活财政信息"; 
$LANG["financial"][69]="合同周期性"; 
$LANG["financial"][76]="开始日期"; 
$LANG["financial"][77]="分期偿还系数"; 
$LANG["financial"][78]="保修结尾价值"; 
$LANG["financial"][79]="第三方类型"; 
$LANG["financial"][80]="保修结尾"; 
$LANG["financial"][81]="会计净值"; 
$LANG["financial"][82]="发case号"; 
$LANG["financial"][83]="项目(0=无限的)最大数字"; 
$LANG["financial"][84]="为元素的这个类型，财政信息是仅一个模型为您将添加的元素。"; 
$LANG["financial"][85]="没建立的请求的项目"; 
$LANG["financial"][87]="预算"; 
$LANG["financial"][88]="到期："; 
$LANG["financial"][89]="TCO (价值+追踪费用)"; 
$LANG["financial"][90]="月度TCO"; 
$LANG["financial"][91]="TCO"; 
$LANG["financial"][92]="ANV"; 
$LANG["financial"][93]="从少于30天到期的合同"; 
$LANG["financial"][94]="在少于7天到期的合同"; 
$LANG["financial"][95]="在少于30天到期的合同"; 
$LANG["financial"][96]="有通知起点在少于7天的合同"; 
$LANG["financial"][97]="有通知起点在少于30天的合同"; 
$LANG["financial"][98]="末端日期"; 
$LANG["financial"][99]="末端日期+通知"; 
$LANG["financial"][100]="邮政编码"; 
$LANG["financial"][101]="城市"; 
$LANG["financial"][102]="省 / 洲"; 
$LANG["financial"][103]="国家"; 
$LANG["financial"][104]="同项目联系在一起"; 
$LANG["financial"][105]="心照不宣"; 
$LANG["financial"][106]="表达"; 
$LANG["financial"][107]="更新"; 

$LANG["gmt"][0]="GMT"; 
$LANG["gmt"][1]="hour(s)"; 

$LANG["help"][1]="Please describe your problem"; 
$LANG["help"][2]="问题必须解决"; 
$LANG["help"][3]="非常高"; 
$LANG["help"][4]="高"; 
$LANG["help"][5]="媒介"; 
$LANG["help"][6]="低"; 
$LANG["help"][7]="非常低"; 
$LANG["help"][8]="通知我关于采取的追赶行动"; 
$LANG["help"][11]="我的邮件地址"; 
$LANG["help"][13]="问题"; 
$LANG["help"][14]="发送消息"; 
$LANG["help"][16]="If you want be notified about the action(s) taken, you must enter your e-mail!"; 
$LANG["help"][18]="Your message has been sent successfully, your request is on file."; 
$LANG["help"][19]="Thank you for using our automatic helpdesk system."; 
$LANG["help"][22]="检索您的计算机ID"; 
$LANG["help"][23]="进入一个在上写字(用户名、项目或者连续)"; 
$LANG["help"][24]="硬件类型"; 
$LANG["help"][25]="计算机"; 
$LANG["help"][26]="网络设备"; 
$LANG["help"][27]="打印机"; 
$LANG["help"][28]="显示器"; 
$LANG["help"][29]="设备"; 
$LANG["help"][30]="通用"; 
$LANG["help"][31]="软件"; 
$LANG["help"][35]="Phone"; 
$LANG["help"][40]="No title in your ticket, please retry."; 
$LANG["help"][41]="No category in your ticket, please retry."; 

$LANG["install"][0]="GLPI设施或更新"; 
$LANG["install"][1]="选项为GLPI的添加新完全设施安装 (GLPI导入的数据将是缺省数据)。"; 
$LANG["install"][2]="选项更新为GLPI更新从一个前版本"; 
$LANG["install"][3]="设施"; 
$LANG["install"][4]="更新"; 
$LANG["install"][5]="检查您的环境的兼容性以GLPI的施行"; 
$LANG["install"][6]="被做的测试"; 
$LANG["install"][7]="发生"; 
$LANG["install"][8]="测试PHP分析器"; 
$LANG["install"][9]="您必须安装PHP4。 您必须这里下载它："; 
$LANG["install"][10]="您使用4.0.0或4.0.1 PHP版本-我们劝告您更新您的PHP"; 
$LANG["install"][11]="PHP版本是至少4.x -完善!"; 
$LANG["install"][12]="会议测试"; 
$LANG["install"][13]="您的PHP分析器没有在会议的支持下被编写!"; 
$LANG["install"][14]="会议的支持是可利用的-完善!"; 
$LANG["install"][15]="检查会议的支持在您的php.ini很好被激活"; 
$LANG["install"][16]="预订写支case方式为转储归档"; 
$LANG["install"][17]="文件不可能被创建。"; 
$LANG["install"][19]="文件被创建了但不可能被删除。"; 
$LANG["install"][20]="A file and a directory have be created and deleted - Perfect !"; 
$LANG["install"][21]="预订写支case方式为文件"; 
$LANG["install"][23]="预订写支case方式为设置归档"; 
$LANG["install"][25]="继续？"; 
$LANG["install"][26]="继续"; 
$LANG["install"][27]="再试"; 
$LANG["install"][28]="数据库连接设定了"; 
$LANG["install"][29]="数据库连接参量"; 
$LANG["install"][30]="Mysql服务器"; 
$LANG["install"][31]="Mysql用户"; 
$LANG["install"][32]="Mysql通行证"; 
$LANG["install"][34]="连接的测试在数据库"; 
$LANG["install"][35]="不可能连接在数据库"; 
$LANG["install"][36]="服务器回答了"; 
$LANG["install"][37]="服务器或/与用户域是空的"; 
$LANG["install"][38]="请选项一个数据库："; 
$LANG["install"][39]="Create a new database or use an existing one:"; 
$LANG["install"][40]="请选项数据库更新："; 
$LANG["install"][41]="不可能使用数据库："; 
$LANG["install"][43]="好-数据库初始化了"; 
$LANG["install"][44]="缺省值任意被导入，感受删除他们如果您要"; 
$LANG["install"][46]="在第一连接您能使用登录GLPI并且密码GLPI为了访问应用与管理员权限"; 
$LANG["install"][47]="不可能写数据库设定了文件"; 
$LANG["install"][48]="错误在创建数据库!"; 
$LANG["install"][49]="您没有选项一个数据库!"; 
$LANG["install"][50]="预订写支case方式为会议归档"; 
$LANG["install"][52]="预订写支case方式为cron归档"; 
$LANG["install"][53]="Test of writing files of log"; 
$LANG["install"][55]="设施完成"; 
$LANG["install"][57]="缺省登录/密码是："; 
$LANG["install"][58]="GLPI/GLPI为管理员帐户"; 
$LANG["install"][59]="tech/tech为工程师帐户"; 
$LANG["install"][60]="normal为正常帐户"; 
$LANG["install"][61]="post-only/post-only为postonly帐户"; 
$LANG["install"][62]="您能删除或修改这些帐户以及第一个词条在数据库。"; 
$LANG["install"][64]="使用GLPI"; 
$LANG["install"][65]="magic_quotes_sybase扩展名测试"; 
$LANG["install"][66]="GLPI不与magic_quotes_sybase选项一起使用; 请设置它再试"; 
$LANG["install"][67]="magic_quotes_sybase选项不是活跃的在您的服务器-完善!"; 
$LANG["install"][70]="不可能创建数据库连接文件，在文件请验证权限"; 
$LANG["install"][71]="Mysql扩展名测试。"; 
$LANG["install"][72]="您必须编写您的php以Mysql扩展名。"; 
$LANG["install"][73]="好-作用mysql_query ()存在-完善!"; 
$LANG["install"][74]="测试是否使用Session_use_trans_sid"; 
$LANG["install"][75]="您在您的php.ini必须descativate Session_use_trans_id选项"; 
$LANG["install"][76]="好-会议运作(没有问题与trans_id) -完善!"; 
$LANG["install"][77]="步"; 
$LANG["install"][81]="设施的起点"; 
$LANG["install"][82]="Database created"; 
$LANG["install"][83]="对作用utf8_encode和utf8_decode的测试"; 
$LANG["install"][84]="GLPI不可能正确地运作没有utf8_encode和utf8_decode作用; 设法激活XML支持为PHP"; 
$LANG["install"][85]="作用被发现了-完善!"; 
$LANG["install"][86]="分配了内存测试"; 
$LANG["install"][87]="分配了内存："; 
$LANG["install"][88]="32MB 极小值为GLPI共同地需要。"; 
$LANG["install"][89]="完善!"; 
$LANG["install"][90]="添加memory_limit参量的尝试在php.ini文件。"; 
$LANG["install"][91]="分配了内存> 32M"; 
$LANG["install"][92]="使用许可"; 
$LANG["install"][93]="我读并且接受预订面的使用许可的条件以上。"; 
$LANG["install"][94]="我读和不接受使用许可的条件被写上面"; 
$LANG["install"][95]="内存无限"; 
$LANG["install"][96]="内存无限"; 
$LANG["install"][97]="Make sure that PHP has write permissions on the directory:"; 
$LANG["install"][98]="If you're running under a Microsoft Windows environment, make sure the directory is in read-write mode."; 
$LANG["install"][99]="Checking write permissions for cache files"; 
$LANG["install"][100]="The directory could not be created."; 
$LANG["install"][101]="The directory was created but could not be removed."; 

$LANG["job"][2]="by"; 
$LANG["job"][3]="Receiver"; 
$LANG["job"][4]="Requester"; 
$LANG["job"][5]="分配到"; 
$LANG["job"][6]="Technician"; 
$LANG["job"][7]="后续"; 
$LANG["job"][11]="描述问题/行动"; 
$LANG["job"][12]="没有后续为这张case。"; 
$LANG["job"][13]="Add a new ticket"; 
$LANG["job"][16]="发现了"; 
$LANG["job"][17]="ticket(s)"; 
$LANG["job"][18]="旧的"; 
$LANG["job"][19]="邮件后续"; 
$LANG["job"][20]="总期间"; 
$LANG["job"][21]="小时"; 
$LANG["job"][22]="详细的"; 
$LANG["job"][29]="添加添加新后续"; 
$LANG["job"][31]="期间"; 
$LANG["job"][32]="无"; 
$LANG["job"][33]="空的描述"; 
$LANG["job"][34]="计划这后续"; 
$LANG["job"][35]="计划"; 
$LANG["job"][37]="总结"; 
$LANG["job"][38]="case"; 
$LANG["job"][39]="更新后续"; 
$LANG["job"][40]="时间成本"; 
$LANG["job"][41]="固定成本"; 
$LANG["job"][42]="物质费用"; 
$LANG["job"][43]="总成本"; 
$LANG["job"][44]="请求来源"; 
$LANG["job"][45]="添加后续"; 

$LANG["joblist"][0]="状态"; 
$LANG["joblist"][1]="Just mine ones"; 
$LANG["joblist"][2]="优先权"; 
$LANG["joblist"][3]="The mine and of my groups"; 
$LANG["joblist"][4]="分配了"; 
$LANG["joblist"][6]="描述"; 
$LANG["joblist"][7]="添加新case为项目…"; 
$LANG["joblist"][8]="没有case发现了"; 
$LANG["joblist"][9]="新的"; 
$LANG["joblist"][10]="关闭了(解决)"; 
$LANG["joblist"][11]="开始在"; 
$LANG["joblist"][12]="关闭在"; 
$LANG["joblist"][16]="没有case进展中。"; 
$LANG["joblist"][17]="关闭了(没解决)"; 
$LANG["joblist"][18]="处理(被分配)"; 
$LANG["joblist"][19]="处理(计划)"; 
$LANG["joblist"][21]="处理"; 
$LANG["joblist"][22]="No old ticket found"; 
$LANG["joblist"][24]="没有关闭了"; 
$LANG["joblist"][25]="旧的"; 
$LANG["joblist"][26]="等待"; 
$LANG["joblist"][27]="邮件为后续"; 

$LANG["knowbase"][1]="常见问题解答"; 
$LANG["knowbase"][3]="问题"; 
$LANG["knowbase"][4]="答复"; 
$LANG["knowbase"][5]="设置了项目入公众常见问题解答"; 
$LANG["knowbase"][6]="为项目选项一个类别："; 
$LANG["knowbase"][7]="删除项目从公众常见问题解答"; 
$LANG["knowbase"][8]="编辑项目"; 
$LANG["knowbase"][9]="删除项目"; 
$LANG["knowbase"][10]="这项目是公众常见问题解答的一部分"; 
$LANG["knowbase"][11]="这项目不作为公众常见问题解答的部分"; 
$LANG["knowbase"][12]="根"; 
$LANG["knowbase"][13]="类别名称"; 
$LANG["knowbase"][14]="Subject"; 
$LANG["knowbase"][15]="Contents"; 
$LANG["knowbase"][24]="Access to the Frequently Asked Questions"; 
$LANG["knowbase"][26]="观看"; 
$LANG["knowbase"][27]="on"; 
$LANG["knowbase"][29]="Recent Entries"; 
$LANG["knowbase"][30]="Most popular questions"; 

$LANG["ldap"][0]="Bulk import users from a LDAP directory"; 
$LANG["ldap"][1]="Synchronizing already imported users"; 
$LANG["ldap"][2]="Import new users"; 
$LANG["ldap"][3]="No users to be imported"; 
$LANG["ldap"][4]="LDAP directory choice"; 
$LANG["ldap"][5]="Please choose LDAP directory to import users from"; 
$LANG["ldap"][6]="Unable to connect to the LDAP directory"; 
$LANG["ldap"][7]="No LDAP directory defined in GLPI"; 
$LANG["ldap"][9]="Test of connection to LDAP directory"; 
$LANG["ldap"][12]="Synchronisation"; 
$LANG["ldap"][13]="in LDAP"; 
$LANG["ldap"][14]="in GLPI"; 
$LANG["ldap"][15]="Synchronize"; 
$LANG["ldap"][16]="Preconfiguration"; 
$LANG["ldap"][17]="Active Directory"; 
$LANG["ldap"][18]="List of LDAP replica"; 
$LANG["ldap"][19]="Replicate"; 
$LANG["ldap"][20]="Add an LDAP replica"; 
$LANG["ldap"][21]="Main server"; 
$LANG["ldap"][22]="Replicate(s)"; 
$LANG["ldap"][23]="Bulk import groups from a LDAP directory"; 
$LANG["ldap"][24]="Import of new groups"; 
$LANG["ldap"][25]="No group to be imported"; 
$LANG["ldap"][30]="How LDAP aliases should be handled"; 
$LANG["ldap"][31]="Never dereferenced (default)"; 
$LANG["ldap"][32]="Always dereferenced"; 
$LANG["ldap"][33]="Dereferenced during the search (but not when locating)"; 
$LANG["ldap"][34]="Dereferenced when locating (not during the search)"; 

$LANG["links"][1]="链接或文件名"; 
$LANG["links"][3]="添加一个外部链接"; 
$LANG["links"][4]="硬件类型联合"; 
$LANG["links"][6]="有效标记"; 
$LANG["links"][7]="没有链接定义了"; 
$LANG["links"][9]="文件内容"; 

$LANG["log"][1]="系统"; 
$LANG["log"][2]="计算机"; 
$LANG["log"][3]="显示器"; 
$LANG["log"][4]="打印机"; 
$LANG["log"][5]="软件"; 
$LANG["log"][6]="网络"; 
$LANG["log"][7]="墨盒"; 
$LANG["log"][8]="外围设备"; 
$LANG["log"][9]="消费品"; 
$LANG["log"][10]="固定资产跟踪"; 
$LANG["log"][11]="联系人"; 
$LANG["log"][12]="supplier"; 
$LANG["log"][13]="文件"; 
$LANG["log"][14]="知识库"; 
$LANG["log"][15]="用户"; 
$LANG["log"][16]="计划"; 
$LANG["log"][17]="合同"; 
$LANG["log"][18]="部件"; 
$LANG["log"][19]="财政信息"; 
$LANG["log"][20]="项目添加了"; 
$LANG["log"][21]="更新项目"; 
$LANG["log"][22]="删除项目"; 
$LANG["log"][23]="恢复项目"; 
$LANG["log"][24]="清除项目"; 
$LANG["log"][26]="断开项目"; 
$LANG["log"][27]="项目连接"; 
$LANG["log"][28]="更新部件"; 
$LANG["log"][30]="关联类型"; 
$LANG["log"][31]="删除类型"; 
$LANG["log"][32]="添加一个链接与项目"; 
$LANG["log"][33]="删除链接与项目"; 
$LANG["log"][34]="add a link with supplier"; 
$LANG["log"][35]="delete link with supplier"; 
$LANG["log"][36]="添加一个链接与联系人"; 
$LANG["log"][37]="删除链接与联系人"; 
$LANG["log"][38]="连接"; 
$LANG["log"][39]="文件类型"; 
$LANG["log"][40]="IP连接"; 
$LANG["log"][41]="连接发生了故障"; 
$LANG["log"][42]="保留"; 
$LANG["log"][43]="电话"; 
$LANG["log"][44]="标题"; 
$LANG["log"][45]="成功"; 
$LANG["log"][46]="发生了故障"; 
$LANG["log"][47]="组"; 
$LANG["log"][48]="添加用户到组"; 
$LANG["log"][49]="删除组的用户"; 
$LANG["log"][50]="固定资产"; 
$LANG["log"][51]="固定资产跟踪"; 
$LANG["log"][53]="工具"; 
$LANG["log"][54]="管理"; 
$LANG["log"][55]="连接"; 
$LANG["log"][58]="保留"; 
$LANG["log"][59]="Cron"; 
$LANG["log"][60]="项目Unglobalization"; 
$LANG["log"][61]="add user to entity"; 
$LANG["log"][62]="remove this user completely"; 
$LANG["log"][63]="entity"; 
$LANG["log"][64]="change of comments"; 
$LANG["log"][65]="rule"; 
$LANG["log"][66]="Security"; 
$LANG["log"][67]="change of notes"; 
$LANG["log"][70]="network port added"; 
$LANG["log"][71]="several network ports added"; 
$LANG["log"][73]="network port deleted"; 
$LANG["log"][74]="several network ports deleted"; 
$LANG["log"][75]="network port moved"; 
$LANG["log"][77]="vlan assigned to a network port"; 
$LANG["log"][78]="vlan assigned to several ports"; 
$LANG["log"][79]="vlan unassigned to a network port"; 
$LANG["log"][80]="vlan unassigned to several network ports"; 

$LANG["login"][0]="Last login"; 
$LANG["login"][1]="再次登录"; 
$LANG["login"][2]="LDAP"; 
$LANG["login"][3]="IMAP/POP"; 
$LANG["login"][4]="CAS"; 
$LANG["login"][5]="访问被否定"; 
$LANG["login"][6]="用户名"; 
$LANG["login"][7]="密码"; 
$LANG["login"][8]="空的登录或密码"; 
$LANG["login"][9]="Not yet authenticated"; 
$LANG["login"][10]="客户端身份验证"; 
$LANG["login"][11]="用户无权连接GLPI"; 
$LANG["login"][12]="Incorrect username or password"; 
$LANG["login"][13]="Password field is empty"; 
$LANG["login"][14]="unknown user"; 
$LANG["login"][15]="User not found or several users found"; 
$LANG["login"][16]="unsuccessful authorization in LDAP"; 
$LANG["login"][18]="Base internal GLPI"; 
$LANG["login"][20]="You do not have access to this application because your account was deactivated or removed"; 
$LANG["login"][21]="Test connection to IMAP/POP server"; 
$LANG["login"][22]="Test successful"; 
$LANG["login"][23]="Test failed"; 
$LANG["login"][24]="Last login date"; 
$LANG["login"][25]="You don't have right to connect"; 
$LANG["login"][26]="You must activate the JavaScript function of your navigator"; 
$LANG["login"][27]="You must accept cookies to reach this application"; 
$LANG["login"][30]="Change of the authentication method"; 
$LANG["login"][31]="Authentication on directory"; 
$LANG["login"][32]="Authentication on GLPI database"; 
$LANG["login"][33]="Authentication on IMAP/POP server"; 

$LANG["mailgate"][0]="Mail Gateway"; 
$LANG["mailgate"][1]="Add a email gateway"; 
$LANG["mailgate"][2]="Get email tickets now"; 
$LANG["mailgate"][3]="Number of available and retrieved emails"; 
$LANG["mailgate"][4]="mbstring extension not found. Warning with charsets used."; 
$LANG["mailgate"][5]="Invalid attached file"; 
$LANG["mailgate"][6]="Too large attached file"; 
$LANG["mailgate"][7]="Mail Gateway: Maximum size of each attached file (0 : no import)"; 
$LANG["mailgate"][8]="bytes"; 

$LANG["mailing"][0]="----------------------------------------------------------"; 
$LANG["mailing"][1]="=====================================================================]="; 
$LANG["mailing"][3]="Content"; 
$LANG["mailing"][4]="Ticket updates"; 
$LANG["mailing"][5]="case的描述"; 
$LANG["mailing"][7]="Concerned Item"; 
$LANG["mailing"][8]="Assigned to"; 
$LANG["mailing"][9]="New ticket"; 
$LANG["mailing"][10]="新case的后续"; 
$LANG["mailing"][11]="关闭case"; 
$LANG["mailing"][12]="分配case到"; 
$LANG["mailing"][13]="自动邮件产生的错误"; 
$LANG["mailing"][14]="case类别的更新"; 
$LANG["mailing"][15]="case优先权的更新"; 
$LANG["mailing"][17]="case项目的更新"; 
$LANG["mailing"][18]="Update the author of the ticket"; 
$LANG["mailing"][19]="新预订"; 
$LANG["mailing"][20]="Update the group of the ticket"; 
$LANG["mailing"][21]="Change in ticket source"; 
$LANG["mailing"][23]="保留修改"; 
$LANG["mailing"][25]="计划："; 
$LANG["mailing"][26]="Added document :"; 
$LANG["mailing"][27]="case的状态的更新"; 
$LANG["mailing"][29]="取消保留"; 
$LANG["mailing"][30]="case更新"; 
$LANG["mailing"][31]="这是检查邮件系统工作的测试邮件"; 
$LANG["mailing"][32]="邮件测试"; 
$LANG["mailing"][33]="墨盒警报"; 
$LANG["mailing"][34]="墨盒种类到达报警阈值："; 
$LANG["mailing"][35]="消费品种类到达报警阈值："; 
$LANG["mailing"][36]="消费品警报"; 
$LANG["mailing"][37]="在通知时间导入的合同："; 
$LANG["mailing"][38]="到期合同 ："; 
$LANG["mailing"][39]="合同警报"; 
$LANG["mailing"][40]="项目保修结束："; 
$LANG["mailing"][41]="财政信息警报"; 
$LANG["mailing"][42]="Change in hourly costs"; 
$LANG["mailing"][43]="Change in fixed costs"; 
$LANG["mailing"][44]="Change in material costs"; 
$LANG["mailing"][45]="Change ticket title"; 
$LANG["mailing"][46]="Change ticket description"; 
$LANG["mailing"][47]="Error in sending the email"; 
$LANG["mailing"][48]="Change in opening date"; 
$LANG["mailing"][49]="Change in closing date"; 
$LANG["mailing"][50]="Change ticket receiver"; 
$LANG["mailing"][51]="Expired license :"; 
$LANG["mailing"][52]="Licenses alarm"; 
$LANG["mailing"][100]="没有被定义的类别"; 
$LANG["mailing"][101]="邮件后续可用"; 
$LANG["mailing"][102]="邮件后续不可用"; 
$LANG["mailing"][103]="Email Follow-up"; 
$LANG["mailing"][104]="后续期间"; 
$LANG["mailing"][105]="没分配"; 
$LANG["mailing"][107]="没什么"; 
$LANG["mailing"][108]="没有作者"; 
$LANG["mailing"][109]="没有组"; 
$LANG["mailing"][110]="Invalid Email"; 
$LANG["mailing"][111]="Alert email sent to"; 
$LANG["mailing"][112]="Invalid email type"; 

$LANG["Menu"][0]="计算机"; 
$LANG["Menu"][1]="网络"; 
$LANG["Menu"][2]="打印机"; 
$LANG["Menu"][3]="显示器"; 
$LANG["Menu"][4]="软件"; 
$LANG["Menu"][5]="固定资产跟踪"; 
$LANG["Menu"][6]="报告"; 
$LANG["Menu"][11]="设置"; 
$LANG["Menu"][12]="数据"; 
$LANG["Menu"][13]="统计"; 
$LANG["Menu"][14]="用户"; 
$LANG["Menu"][15]="管理"; 
$LANG["Menu"][16]="设备"; 
$LANG["Menu"][17]="保留"; 
$LANG["Menu"][18]="工具"; 
$LANG["Menu"][19]="知识库"; 
$LANG["Menu"][20]="FAQ"; 
$LANG["Menu"][21]="墨盒"; 
$LANG["Menu"][22]="联系人"; 
$LANG["Menu"][23]="Suppliers"; 
$LANG["Menu"][24]="财政信息"; 
$LANG["Menu"][25]="合同"; 
$LANG["Menu"][26]="管理"; 
$LANG["Menu"][27]="文档"; 
$LANG["Menu"][28]="状态"; 
$LANG["Menu"][29]="计划"; 
$LANG["Menu"][30]="Logs"; 
$LANG["Menu"][31]="服务台"; 
$LANG["Menu"][32]="消费品"; 
$LANG["Menu"][33]="OCSNG"; 
$LANG["Menu"][34]="打电话"; 
$LANG["Menu"][35]="个人配置"; 
$LANG["Menu"][36]="组"; 
$LANG["Menu"][37]="Entities"; 
$LANG["Menu"][38]="Inventory"; 
$LANG["Menu"][39]="Mail Gateways"; 
$LANG["Menu"][40]="Bookmarks"; 

$LANG["monitors"][14]="话筒"; 
$LANG["monitors"][15]="扬声器"; 
$LANG["monitors"][18]="标志"; 
$LANG["monitors"][19]="次级D"; 
$LANG["monitors"][20]="BNC"; 
$LANG["monitors"][21]="大小"; 
$LANG["monitors"][30]="根据模板的添加新显示器"; 
$LANG["monitors"][32]="DVI"; 
$LANG["monitors"][33]="Pivot"; 

$LANG["networking"][5]="內存 (MB)"; 
$LANG["networking"][6]="Network port"; 
$LANG["networking"][12]="网络设备"; 
$LANG["networking"][13]="发现网络端口"; 
$LANG["networking"][14]="IP"; 
$LANG["networking"][15]="MAC"; 
$LANG["networking"][17]="连接到"; 
$LANG["networking"][19]="添加网络端口…"; 
$LANG["networking"][20]="端口管理"; 
$LANG["networking"][21]="逻辑数字"; 
$LANG["networking"][25]="on"; 
$LANG["networking"][37]="Networking port found"; 
$LANG["networking"][44]="端口"; 
$LANG["networking"][45]="在端口现在连接"; 
$LANG["networking"][46]="添加几个端口…"; 
$LANG["networking"][47]="从"; 
$LANG["networking"][48]="到"; 
$LANG["networking"][49]="固件"; 
$LANG["networking"][51]="Network point"; 
$LANG["networking"][52]="网络点数字"; 
$LANG["networking"][53]="根据模板的添加新项目"; 
$LANG["networking"][55]="关联VLAN"; 
$LANG["networking"][56]="VLAN"; 
$LANG["networking"][57]="在名单选择机器地址或在下面指定"; 
$LANG["networking"][58]="删除VLAN"; 
$LANG["networking"][59]="Gateway"; 
$LANG["networking"][60]="Mask"; 
$LANG["networking"][61]="Subnet"; 

$LANG["ocsconfig"][0]="OCS NG - > GLPI导入模块配置"; 
$LANG["ocsconfig"][1]="OCSweb数据库的用户"; 
$LANG["ocsconfig"][2]="OCSweb主机"; 
$LANG["ocsconfig"][3]="OCSweb用户的密码"; 
$LANG["ocsconfig"][4]="OCS数据库名称"; 
$LANG["ocsconfig"][5]="导入选项"; 
$LANG["ocsconfig"][10]="全局导入"; 
$LANG["ocsconfig"][11]="没有导入"; 
$LANG["ocsconfig"][12]="单位导入"; 
$LANG["ocsconfig"][13]="单位导入： 所有正它是，导入"; 
$LANG["ocsconfig"][14]="全局导入： 导入所有但是全局的被处理的材料(没有被加倍的绽放)"; 
$LANG["ocsconfig"][15]="没有导入： 不是插件式意志导入这些元素"; 
$LANG["ocsconfig"][16]="缺省状态"; 
$LANG["ocsconfig"][17]="极限导入对以下标记(分离器$ ，没什么为所有)"; 
$LANG["ocsconfig"][18]="First, check that duplicates are managed in OCSNG"; 
$LANG["ocsconfig"][19]="Unit import on serial number"; 
$LANG["ocsconfig"][27]="General informations"; 
$LANG["ocsconfig"][36]="调制解调器"; 
$LANG["ocsconfig"][37]="端口"; 
$LANG["ocsconfig"][38]="使用软件词典 OCS"; 
$LANG["ocsconfig"][39]="OCS标记"; 
$LANG["ocsconfig"][40]="Number of computers to synchronize using the cron"; 
$LANG["ocsconfig"][41]="Registry"; 
$LANG["ocsconfig"][43]="OCS Administrative Information"; 
$LANG["ocsconfig"][44]="Default license type"; 
$LANG["ocsconfig"][45]="Site license (global)"; 
$LANG["ocsconfig"][46]="Free license"; 
$LANG["ocsconfig"][47]="License set to buy by default"; 
$LANG["ocsconfig"][48]="Behavior when disconnecting"; 
$LANG["ocsconfig"][49]="Trash"; 
$LANG["ocsconfig"][50]="Deletion"; 
$LANG["ocsconfig"][51]="Disconnected status"; 
$LANG["ocsconfig"][52]="Automatic connection of machines"; 
$LANG["ocsconfig"][53]="Activate the automatic link"; 
$LANG["ocsconfig"][54]="Existence criteria of a computer"; 
$LANG["ocsconfig"][55]="Find computers having the status"; 
$LANG["ocsconfig"][56]="empty"; 
$LANG["ocsconfig"][57]="equal"; 
$LANG["ocsconfig"][58]="The connection automatically connects a GLPI computer with one in OCS. This option is taken into account only by synchronization scripts (not manually)."; 
$LANG["ocsconfig"][59]="URL of the OCS console"; 

$LANG["ocsng"][0]="OCS固定资产NG"; 
$LANG["ocsng"][1]="已经导入的计算机的同步"; 
$LANG["ocsng"][2]="添加新计算机的导入"; 
$LANG["ocsng"][3]="Clean links between GLPI and OCS"; 
$LANG["ocsng"][4]="链接添加新OCS计算机到现有的GLPI计算机"; 
$LANG["ocsng"][5]="导入添加新计算机"; 
$LANG["ocsng"][6]="Auto update"; 
$LANG["ocsng"][7]="从OCSNG导入了"; 
$LANG["ocsng"][8]="导入成功"; 
$LANG["ocsng"][9]="将导入的不添加新机器"; 
$LANG["ocsng"][10]="在OCS更添加新计算机"; 
$LANG["ocsng"][11]="更新计算机"; 
$LANG["ocsng"][12]="将更添加新不添加新机器"; 
$LANG["ocsng"][13]="导入日期在GLPI"; 
$LANG["ocsng"][14]="Last OCS inventory date"; 
$LANG["ocsng"][15]="没有域锁了"; 
$LANG["ocsng"][16]="锁了域"; 
$LANG["ocsng"][18]="与OCS数据库的连接成功"; 
$LANG["ocsng"][19]="Valid OCS NG configuration and version"; 
$LANG["ocsng"][20]="无效OCS NG版本： 要求RC3"; 
$LANG["ocsng"][21]="与OCS NG数据库的连接发生了故障"; 
$LANG["ocsng"][22]="注意! 导入的数据(参见您的配置)将击碎现有数据"; 
$LANG["ocsng"][23]="不可能的导入， GLPI计算机已经与OCS NG有关的元素"; 
$LANG["ocsng"][24]="力量同步"; 
$LANG["ocsng"][26]="Choice of an OCS server"; 
$LANG["ocsng"][27]="No OCS servers defined"; 
$LANG["ocsng"][28]="New OCS server based on a template"; 
$LANG["ocsng"][29]="OCS server"; 
$LANG["ocsng"][30]="Locked monitor(s)"; 
$LANG["ocsng"][31]="No monitor locked"; 
$LANG["ocsng"][32]="Locked device(s)"; 
$LANG["ocsng"][33]="No device locked"; 
$LANG["ocsng"][34]="Locked printer(s)"; 
$LANG["ocsng"][35]="No printer locked"; 
$LANG["ocsng"][36]="Destination entity"; 
$LANG["ocsng"][37]="Activate the preview"; 
$LANG["ocsng"][38]="Disable the preview"; 
$LANG["ocsng"][40]="Match rule ?"; 
$LANG["ocsng"][41]="Manual import mode"; 
$LANG["ocsng"][42]="Invalid OCSNG configuration (TRACE_DELETED needs to be active)"; 
$LANG["ocsng"][43]="Access denied on OCS database (Need to be able to write on hardware.CHECKSUM)"; 
$LANG["ocsng"][44]="Access denied on OCS database (Need to be able to delete in deleted_equiv table)"; 
$LANG["ocsng"][45]="OCS ID"; 
$LANG["ocsng"][46]="Deleted in OCS"; 
$LANG["ocsng"][47]="Linked with an OCS computer"; 
$LANG["ocsng"][48]="The OCS ID of the computer changed"; 
$LANG["ocsng"][49]="Agent"; 
$LANG["ocsng"][50]="Locked IP(s)"; 
$LANG["ocsng"][51]="No IP locked"; 
$LANG["ocsng"][52]="Locked software(s)"; 
$LANG["ocsng"][53]="No software locked"; 
$LANG["ocsng"][54]="Software deleted by OCS synchronization"; 

$LANG["pager"][1]="到"; 
$LANG["pager"][2]="从"; 
$LANG["pager"][3]="在"; 
$LANG["pager"][4]="显示"; 
$LANG["pager"][5]="项目"; 

$LANG["peripherals"][18]="品牌"; 
$LANG["peripherals"][30]="根据模板添加新设备"; 
$LANG["peripherals"][31]="全局管理"; 
$LANG["peripherals"][32]="单位管理"; 
$LANG["peripherals"][33]="管理类型"; 

$LANG["phones"][18]="品牌"; 
$LANG["phones"][30]="根据模板的添加新模型"; 
$LANG["phones"][35]="固件"; 
$LANG["phones"][36]="电源"; 
$LANG["phones"][38]="耳机"; 
$LANG["phones"][39]="扬声器"; 
$LANG["phones"][40]="行数"; 

$LANG["planning"][0]="工程师请求已经有在这时间计划的干预。"; 
$LANG["planning"][1]="错误在您的日期词条， 起点日期高于结束日期"; 
$LANG["planning"][5]="天"; 
$LANG["planning"][6]="星期"; 
$LANG["planning"][8]="固定资产跟踪"; 
$LANG["planning"][9]="由"; 
$LANG["planning"][12]="以 ical 格式下载日历"; 
$LANG["planning"][13]="Webcal://同步"; 
$LANG["planning"][14]="月"; 
$LANG["planning"][15]="您的计划"; 
$LANG["planning"][16]="Information"; 
$LANG["planning"][17]="To do"; 
$LANG["planning"][18]="Done"; 

$LANG["printers"][14]="Serial"; 
$LANG["printers"][15]="Parallel"; 
$LANG["printers"][18]="Ports"; 
$LANG["printers"][27]="USB"; 
$LANG["printers"][28]="根据模板添加打印机"; 
$LANG["printers"][30]="初始页面计数器"; 
$LANG["printers"][31]="打印了页"; 

$LANG["profiles"][0]="Global right"; 
$LANG["profiles"][1]="Entity Right"; 
$LANG["profiles"][2]="接口"; 
$LANG["profiles"][3]="服务台权限"; 
$LANG["profiles"][4]="中央权限"; 
$LANG["profiles"][5]="创建一张case"; 
$LANG["profiles"][6]="Add a followup to tickets (author)"; 
$LANG["profiles"][7]="Show all tickets"; 
$LANG["profiles"][8]="观看所有后续(公开和私有)"; 
$LANG["profiles"][9]="显示公开后续"; 
$LANG["profiles"][10]="读"; 
$LANG["profiles"][11]="写"; 
$LANG["profiles"][12]="不能进入"; 
$LANG["profiles"][13]="缺省配置文件"; 
$LANG["profiles"][14]="删除case"; 
$LANG["profiles"][15]="添加后续到所有case"; 
$LANG["profiles"][16]="To be in charge of a ticket"; 
$LANG["profiles"][17]="窃取case"; 
$LANG["profiles"][18]="Update a ticket"; 
$LANG["profiles"][19]="Assign a ticket"; 
$LANG["profiles"][20]="View personnal planning"; 
$LANG["profiles"][21]="观看所有计划"; 
$LANG["profiles"][22]="个人配置"; 
$LANG["profiles"][23]="保留管理"; 
$LANG["profiles"][24]="更新密码"; 
$LANG["profiles"][25]="公共"; 
$LANG["profiles"][26]="Show tickets create by my groups"; 
$LANG["profiles"][27]="See hardwares of my groups"; 
$LANG["profiles"][28]="Recursive"; 
$LANG["profiles"][29]="Dynamic"; 
$LANG["profiles"][30]="View OCSNG information"; 
$LANG["profiles"][31]="Synchronize OCSNG manually"; 
$LANG["profiles"][32]="See assigned tickets (personnal + group associated)"; 
$LANG["profiles"][33]="No user founded"; 
$LANG["profiles"][34]="Caption"; 
$LANG["profiles"][35]="Update all followups"; 
$LANG["profiles"][36]="See schedule of people of my groups"; 
$LANG["profiles"][37]="Default entity"; 
$LANG["profiles"][38]="Visibility"; 
$LANG["profiles"][39]="Assignment"; 
$LANG["profiles"][40]="Update"; 
$LANG["profiles"][41]="Creation"; 
$LANG["profiles"][42]="Association"; 
$LANG["profiles"][43]="Authentication and synchronization users method"; 

$LANG["registry"][1]="Hive"; 
$LANG["registry"][2]="Path"; 
$LANG["registry"][3]="Key/value"; 
$LANG["registry"][4]="Registry key(s) found"; 
$LANG["registry"][5]="No key found in registry"; 
$LANG["registry"][6]="OCS name"; 

$LANG["reminder"][0]="个人笔记"; 
$LANG["reminder"][1]="公开笔记"; 
$LANG["reminder"][6]="添加新笔记"; 
$LANG["reminder"][9]="文本"; 
$LANG["reminder"][12]="添加到日历"; 
$LANG["reminder"][15]="没有标题"; 
$LANG["reminder"][16]="Global notes"; 

$LANG["reports"][0]="选择一个您想要形成的报告"; 
$LANG["reports"][4]="硬件名单根据合同"; 
$LANG["reports"][11]="硬件根据合同"; 
$LANG["reports"][12]="硬件类型"; 
$LANG["reports"][13]="日期"; 
$LANG["reports"][15]="显示报告"; 
$LANG["reports"][19]="联系人姓名"; 
$LANG["reports"][23]="日期"; 
$LANG["reports"][24]="对计算机制约"; 
$LANG["reports"][26]="缺省报告"; 
$LANG["reports"][27]="根据合同"; 
$LANG["reports"][28]="以年计"; 
$LANG["reports"][33]="网络报告"; 
$LANG["reports"][36]="连接的设备"; 
$LANG["reports"][37]="网络点"; 
$LANG["reports"][38]="IP"; 
$LANG["reports"][39]="根据地点"; 
$LANG["reports"][41]="根据交换器"; 
$LANG["reports"][42]="根据网络点"; 
$LANG["reports"][46]="交换器端口"; 
$LANG["reports"][47]="设备端口"; 
$LANG["reports"][49]="根据交换器的网络报告"; 
$LANG["reports"][51]="根据网络点的网络报告"; 
$LANG["reports"][52]="交换器"; 
$LANG["reports"][54]="根据地点的网络报告"; 
$LANG["reports"][57]="原料单"; 
$LANG["reports"][58]="以年计的物质报告"; 
$LANG["reports"][59]="显示后续"; 
$LANG["reports"][60]="开始日期"; 
$LANG["reports"][61]="截止日期"; 
$LANG["reports"][62]="硬件财政信息"; 
$LANG["reports"][63]="其他财政信息(使用许可、墨盒，消费品)"; 

$LANG["reservation"][1]="预定的设备"; 
$LANG["reservation"][2]="Device temporarily unavailable"; 
$LANG["reservation"][3]="Click to make unavailable"; 
$LANG["reservation"][4]="借出的设备"; 
$LANG["reservation"][5]="Click to make available"; 
$LANG["reservation"][6]="点击为不批准借出"; 
$LANG["reservation"][7]="点击为批准借出"; 
$LANG["reservation"][8]="预订"; 
$LANG["reservation"][9]="预订一个项目"; 
$LANG["reservation"][12]="开始时间"; 
$LANG["reservation"][13]="结束时间"; 
$LANG["reservation"][16]="对"; 
$LANG["reservation"][17]="从"; 
$LANG["reservation"][18]="需要的项目已经预订在需要的时间"; 
$LANG["reservation"][20]="回到日历"; 
$LANG["reservation"][21]="看预订"; 
$LANG["reservation"][22]="修改批注"; 
$LANG["reservation"][25]="包有可供出借的硬件"; 
$LANG["reservation"][26]="查看所有"; 
$LANG["reservation"][27]="周期性"; 
$LANG["reservation"][28]="星期"; 
$LANG["reservation"][29]="天"; 
$LANG["reservation"][30]="计时"; 
$LANG["reservation"][31]="由"; 
$LANG["reservation"][34]="不能预定的项目"; 
$LANG["reservation"][35]="未来和进行中预订"; 
$LANG["reservation"][36]="通过预订"; 
$LANG["reservation"][37]="没有预订"; 
$LANG["reservation"][38]="Are you sure you want do delete this item from the loan items ?"; 
$LANG["reservation"][39]="That will remove all the reservations in progress."; 
$LANG["reservation"][40]="Reservation done. Email sent to"; 

$LANG["ruleldap"][1]="of LDAP criteria"; 
$LANG["ruleldap"][2]="No criteria defined"; 
$LANG["ruleldap"][3]="Add an LDAP criteria"; 

$LANG["rulesengine"][0]="is"; 
$LANG["rulesengine"][1]="is not"; 
$LANG["rulesengine"][2]="contains"; 
$LANG["rulesengine"][3]="does not contain"; 
$LANG["rulesengine"][4]="starting with"; 
$LANG["rulesengine"][5]="finished by"; 
$LANG["rulesengine"][6]="Criteria"; 
$LANG["rulesengine"][7]="Actions"; 
$LANG["rulesengine"][8]="Rules management"; 
$LANG["rulesengine"][9]="Matching type"; 
$LANG["rulesengine"][11]="Action type"; 
$LANG["rulesengine"][12]="Fields"; 
$LANG["rulesengine"][13]="Value"; 
$LANG["rulesengine"][14]="Condition"; 
$LANG["rulesengine"][15]="Reason"; 
$LANG["rulesengine"][16]="Criteria"; 
$LANG["rulesengine"][17]="Rules"; 
$LANG["rulesengine"][18]="Rules to affect a computer to an entity"; 
$LANG["rulesengine"][19]="Entity and rights assignment rules"; 
$LANG["rulesengine"][22]="Assign"; 
$LANG["rulesengine"][24]="Rule type"; 
$LANG["rulesengine"][25]="Name of computer"; 
$LANG["rulesengine"][26]="Regex checks"; 
$LANG["rulesengine"][27]="regex does not match"; 
$LANG["rulesengine"][28]="Business rules for tickets"; 
$LANG["rulesengine"][29]="List rules"; 
$LANG["rulesengine"][30]="Action"; 
$LANG["rulesengine"][33]="Dropdown dictionary"; 
$LANG["rulesengine"][35]="Software dictionnary"; 
$LANG["rulesengine"][36]="Manufacturer dictionnary"; 
$LANG["rulesengine"][37]="Rules of assignment of a category to softwares"; 
$LANG["rulesengine"][38]="Recalculate"; 
$LANG["rulesengine"][39]="Ignore"; 
$LANG["rulesengine"][40]="the category"; 
$LANG["rulesengine"][41]="Validation"; 
$LANG["rulesengine"][42]="AND"; 
$LANG["rulesengine"][43]="OR"; 
$LANG["rulesengine"][45]="Assign value from regex"; 
$LANG["rulesengine"][50]="Computer model dictionnary"; 
$LANG["rulesengine"][51]="Monitor model dictionary"; 
$LANG["rulesengine"][52]="Phone model dictionary"; 
$LANG["rulesengine"][53]="Peripheral model dictionary"; 
$LANG["rulesengine"][54]="Printer model dictionary"; 
$LANG["rulesengine"][55]="Networking model dictionary"; 
$LANG["rulesengine"][56]="Models"; 
$LANG["rulesengine"][60]="Computer type dictionary"; 
$LANG["rulesengine"][61]="Monitor type dictionary"; 
$LANG["rulesengine"][62]="Phone type dictionary"; 
$LANG["rulesengine"][63]="Peripheral type dictionary"; 
$LANG["rulesengine"][64]="Printer type dictionary"; 
$LANG["rulesengine"][65]="Networking device type dictionnary"; 
$LANG["rulesengine"][66]="Types"; 
$LANG["rulesengine"][67]="OS dictionary"; 
$LANG["rulesengine"][68]="Service Pack dictionary"; 
$LANG["rulesengine"][69]="OS versions dictionary"; 
$LANG["rulesengine"][76]="Replay dictionnary"; 
$LANG["rulesengine"][77]="Dictionnaries"; 
$LANG["rulesengine"][78]="Version"; 
$LANG["rulesengine"][79]="Add regex result"; 
$LANG["rulesengine"][80]="Global dictionnary"; 
$LANG["rulesengine"][81]="Rule result"; 
$LANG["rulesengine"][82]="Result details"; 
$LANG["rulesengine"][83]="You can affect the result of a regular expression using the string #0"; 
$LANG["rulesengine"][84]="Test rules engine"; 
$LANG["rulesengine"][85]="Regular expression result"; 
$LANG["rulesengine"][86]="Software category affected when deleted by dictionay"; 
$LANG["rulesengine"][87]="Software deleted by GLPI dictionary"; 
$LANG["rulesengine"][88]="Software created by GLPI dictionary"; 
$LANG["rulesengine"][90]="Work in progress..."; 
$LANG["rulesengine"][91]="Work ended."; 
$LANG["rulesengine"][92]="Warning before running the dictionary"; 
$LANG["rulesengine"][93]="Caution ! This operation can put software in the trash.<br>Think of telling your users."; 
$LANG["rulesengine"][94]="FUSION"; 
$LANG["rulesengine"][95]="Manufacturer choice"; 
$LANG["rulesengine"][96]="Replay the dictionary for manufacturer(s)<br> ( ----- = All)"; 
$LANG["rulesengine"][97]="No element to be tested"; 
$LANG["rulesengine"][100]="Cache informations"; 
$LANG["rulesengine"][102]="Rule name"; 
$LANG["rulesengine"][103]="Objects in cache"; 
$LANG["rulesengine"][104]="Original value"; 
$LANG["rulesengine"][105]="Modified value"; 
$LANG["rulesengine"][106]="Unchanged"; 
$LANG["rulesengine"][107]="Inactive"; 
$LANG["rulesengine"][108]="original"; 
$LANG["rulesengine"][110]="Rights assignment"; 
$LANG["rulesengine"][111]="Entities assignment"; 
$LANG["rulesengine"][112]="Rights and entities assignment"; 
$LANG["rulesengine"][120]="The engine stops on the first checked rule."; 
$LANG["rulesengine"][121]="The engine treats all the rules."; 
$LANG["rulesengine"][122]="The engine passes the result of a rule to the following ones."; 

$LANG["search"][0]="检索"; 
$LANG["search"][2]="包含"; 
$LANG["search"][4]="排序"; 
$LANG["search"][8]="开始日期"; 
$LANG["search"][9]="结束日期"; 
$LANG["search"][10]="在"; 
$LANG["search"][11]="看的项目"; 
$LANG["search"][15]="没有发现项目"; 
$LANG["search"][16]="最少"; 
$LANG["search"][17]="添加检索标准"; 
$LANG["search"][18]="删除检索标准"; 
$LANG["search"][19]="添加全局检索标准"; 
$LANG["search"][20]="添加全局检索标准"; 

$LANG["setup"][0]="下拉列表"; 
$LANG["setup"][1]="Caution, if these items are used, they will be replaced by null."; 
$LANG["setup"][2]="Add user..."; 
$LANG["setup"][3]="LDAP link"; 
$LANG["setup"][4]="计算机类型"; 
$LANG["setup"][5]="操作系统"; 
$LANG["setup"][9]="网络界面"; 
$LANG["setup"][10]="固定资产"; 
$LANG["setup"][14]="电子邮件"; 
$LANG["setup"][18]="登陆"; 
$LANG["setup"][19]="密码"; 
$LANG["setup"][35]="兆赫"; 
$LANG["setup"][40]="首先显示新case？"; 
$LANG["setup"][41]="Select Language"; 
$LANG["setup"][42]="网络类型"; 
$LANG["setup"][43]="打印机类型"; 
$LANG["setup"][44]="显示器类型"; 
$LANG["setup"][45]="Case Type"; 
$LANG["setup"][62]="选择类别配置"; 
$LANG["setup"][63]="注意，您将删除一个用于一个或更多项目的标题"; 
$LANG["setup"][64]="如果您确定删除，这个标题的项目将赋给空域"; 
$LANG["setup"][65]="您能将一个替换这个标题的所有事件："; 
$LANG["setup"][67]="外在认证"; 
$LANG["setup"][68]="邮件后续"; 
$LANG["setup"][69]="设备型号"; 
$LANG["setup"][70]="一般设定"; 
$LANG["setup"][71]="固件"; 
$LANG["setup"][72]="选择一个下拉列表"; 
$LANG["setup"][73]="网络点"; 
$LANG["setup"][74]="您不能删除那个地方，因为它有次级"; 
$LANG["setup"][75]="作为子项目"; 
$LANG["setup"][76]="在同一个水平"; 
$LANG["setup"][77]="Select a location"; 
$LANG["setup"][79]="case的类别"; 
$LANG["setup"][80]="第三方类型"; 
$LANG["setup"][81]="文件标题"; 
$LANG["setup"][82]="联系人类型"; 
$LANG["setup"][83]="项目状态"; 
$LANG["setup"][84]="墨盒类型"; 
$LANG["setup"][85]="合同类型"; 
$LANG["setup"][86]="內存类型"; 
$LANG["setup"][87]="外部链接"; 
$LANG["setup"][88]="网络"; 
$LANG["setup"][89]="域"; 
$LANG["setup"][90]="VLANs"; 
$LANG["setup"][91]="计算机模式"; 
$LANG["setup"][92]="消费品种类"; 
$LANG["setup"][93]="硬盘连接"; 
$LANG["setup"][94]="监视器模式"; 
$LANG["setup"][95]="网络模式"; 
$LANG["setup"][96]="打印机模式"; 
$LANG["setup"][97]="外围设备模式"; 
$LANG["setup"][102]="Log Level"; 
$LANG["setup"][103]="1 -重要(仅登录错误)"; 
$LANG["setup"][104]="2 -严厉(没使用)"; 
$LANG["setup"][105]="3 -重要(成功登录)"; 
$LANG["setup"][106]="4 -通知(添加，删除，跟踪)"; 
$LANG["setup"][107]="5 -完成(所有)"; 
$LANG["setup"][108]="Number of log events to be printed"; 
$LANG["setup"][109]="How long logs are keep in database (in days, 0 for infinite)"; 
$LANG["setup"][110]="在登录中显示新case"; 
$LANG["setup"][111]="打印成页的元素的数字"; 
$LANG["setup"][112]="每个项目清单的字符最大数"; 
$LANG["setup"][113]="默认语言"; 
$LANG["setup"][114]="优先权颜色"; 
$LANG["setup"][115]="墨盒和消费品计数的缺省门限"; 
$LANG["setup"][116]="自动分配case给技术人员负责"; 
$LANG["setup"][117]="批准常见问题解答的匿名视图"; 
$LANG["setup"][118]="登录页的文本"; 
$LANG["setup"][119]="显示配置"; 
$LANG["setup"][120]="使用Ajax"; 
$LANG["setup"][121]="Ajax计算机通配符"; 
$LANG["setup"][122]="Ajax -项目的最大数字观看了"; 
$LANG["setup"][123]="如果项目的数量是较少比, 不使用Ajax(0=never)"; 
$LANG["setup"][124]="自动地添加一个外在认证来源的用户"; 
$LANG["setup"][125]="... From an external source"; 
$LANG["setup"][126]="自动地添加一个外部来源的用户"; 
$LANG["setup"][127]="文本的自动完成调遣与Ajax"; 
$LANG["setup"][128]="数据格式"; 
$LANG["setup"][129]="显示GLPI ID"; 
$LANG["setup"][130]="为下一个/上一个项目使用"; 
$LANG["setup"][131]="选择框中显示的最多字符"; 
$LANG["setup"][132]="Open List"; 
$LANG["setup"][133]="激活OCSNG方式"; 
$LANG["setup"][134]="OCSNG方式"; 
$LANG["setup"][135]="正常"; 
$LANG["setup"][136]="翻译"; 
$LANG["setup"][137]="调试"; 
$LANG["setup"][138]="使用GLPI在方式下"; 
$LANG["setup"][139]="公共"; 
$LANG["setup"][140]="键入"; 
$LANG["setup"][141]="示范"; 
$LANG["setup"][142]="管理"; 
$LANG["setup"][144]="工具"; 
$LANG["setup"][145]="操作系统"; 
$LANG["setup"][147]="Ajax"; 
$LANG["setup"][148]="Step for the hours"; 
$LANG["setup"][149]="Number of decimals in amounts"; 
$LANG["setup"][150]="Number Format"; 
$LANG["setup"][152]="LDAP配置"; 
$LANG["setup"][154]="Basedn"; 
$LANG["setup"][155]="rootdn (非匿名)"; 
$LANG["setup"][156]="通行证(非匿名)"; 
$LANG["setup"][157]="The LDAP extension of your PHP parser isn't installed"; 
$LANG["setup"][158]="不能用LDAP作为连接的外部来源"; 
$LANG["setup"][159]="连接过滤器"; 
$LANG["setup"][162]="IMAP/POP配置"; 
$LANG["setup"][164]="IMAP/POP主机名(用户邮件将是login@thishost)"; 
$LANG["setup"][165]="Your PHP parser was compiled without the IMAP functions"; 
$LANG["setup"][166]="不可能使用IMAP/POP作为连接的外部来源"; 
$LANG["setup"][167]="GLPI/LDAP链接"; 
$LANG["setup"][168]="连接选项"; 
$LANG["setup"][169]="邮件(选项)"; 
$LANG["setup"][170]="结果的连接参量"; 
$LANG["setup"][171]="端口(optional)"; 
$LANG["setup"][172]="LDAP端口(default=389)"; 
$LANG["setup"][174]="CAS Host"; 
$LANG["setup"][175]="端口"; 
$LANG["setup"][176]="根目录(任意)"; 
$LANG["setup"][177]="CAS配置"; 
$LANG["setup"][178]="The CURL or DOMXML extension for your PHP parser isn't installed"; 
$LANG["setup"][179]="不可能用CAS作为连接的外部来源"; 
$LANG["setup"][180]="使用TLS"; 
$LANG["setup"][181]="ldap_start_tls不存在"; 
$LANG["setup"][182]="Logout fallback URL"; 
$LANG["setup"][183]="Use cache"; 
$LANG["setup"][184]="Restrictions"; 
$LANG["setup"][185]="Logs in files (SQL, email, cron...)"; 
$LANG["setup"][186]="Time zone"; 
$LANG["setup"][190]="x509 certificate"; 
$LANG["setup"][191]="email attribute for x509"; 
$LANG["setup"][192]="Enabled"; 
$LANG["setup"][193]="Field holding the login in the _SERVER array"; 
$LANG["setup"][194]="Additional informations retrieval from LDAP directory"; 
$LANG["setup"][195]="Keep status"; 
$LANG["setup"][196]="Clear status"; 
$LANG["setup"][197]="Copy computer status"; 
$LANG["setup"][198]="Set status"; 
$LANG["setup"][201]="功能配置"; 
$LANG["setup"][202]="使用邮件后续"; 
$LANG["setup"][203]="Administrator Email"; 
$LANG["setup"][204]="邮件署名"; 
$LANG["setup"][205]="邮件送到管理员"; 
$LANG["setup"][206]="发送邮件到管理员失败"; 
$LANG["setup"][207]="Administrator reply-to Email (if needed)"; 
$LANG["setup"][211]="为所有的新case"; 
$LANG["setup"][212]="为每个后续"; 
$LANG["setup"][213]="在case的closing"; 
$LANG["setup"][217]="PHP邮件功能未知或没有在您的系统中被激活"; 
$LANG["setup"][218]="对SMTP的使用是需要的"; 
$LANG["setup"][219]="允许匿名case确定(helpdesk.html)"; 
$LANG["setup"][221]="财政年度初期(天和月)"; 
$LANG["setup"][223]="日程表计划的极限"; 
$LANG["setup"][225]="为了保留(添加，修改和删除)"; 
$LANG["setup"][226]="在邮件中添加一个链接到GLPI"; 
$LANG["setup"][227]="基于URL使用的"; 
$LANG["setup"][228]="登录域"; 
$LANG["setup"][229]="测试发一个邮件到管理员"; 
$LANG["setup"][230]="当更新case时"; 
$LANG["setup"][231]="使用SMTP服务器送邮件"; 
$LANG["setup"][232]="SMTP主机"; 
$LANG["setup"][233]="SMTP端口"; 
$LANG["setup"][234]="SMTP登录"; 
$LANG["setup"][235]="SMTP密码"; 
$LANG["setup"][236]="前线工程师负责此case"; 
$LANG["setup"][237]="管理员"; 
$LANG["setup"][239]="工程师负责此case"; 
$LANG["setup"][240]="通知选项"; 
$LANG["setup"][241]="没有个人标准。 请创建您的个人参量？"; 
$LANG["setup"][242]="警报选项"; 
$LANG["setup"][243]="消费品警报"; 
$LANG["setup"][244]="墨盒警报"; 
$LANG["setup"][245]="召回"; 
$LANG["setup"][246]="合同警报"; 
$LANG["setup"][247]="财政信息警报"; 
$LANG["setup"][248]="Group in charge of the ticket"; 
$LANG["setup"][249]="Requester group"; 
$LANG["setup"][250]="缺省检索域列表"; 
$LANG["setup"][252]="选择显示缺省项目"; 
$LANG["setup"][253]="Filter to search in groups"; 
$LANG["setup"][254]="Search type"; 
$LANG["setup"][255]="Group attribute containing its users"; 
$LANG["setup"][256]="In users"; 
$LANG["setup"][257]="In groups"; 
$LANG["setup"][258]="Users & Groups"; 
$LANG["setup"][259]="Belonging to groups"; 
$LANG["setup"][260]="User attribute containing its groups"; 
$LANG["setup"][261]="Group DN"; 
$LANG["setup"][262]="Use DN in the search"; 
$LANG["setup"][263]="Search filter for users"; 
$LANG["setup"][264]="Alarms on expired licenses"; 
$LANG["setup"][270]="Restrict manual management of items"; 
$LANG["setup"][271]="Restrict monitor management"; 
$LANG["setup"][272]="Restrict device management"; 
$LANG["setup"][273]="Restrict phone management"; 
$LANG["setup"][274]="for manual add"; 
$LANG["setup"][275]="Restrict printer management"; 
$LANG["setup"][276]="Restrict license management"; 
$LANG["setup"][277]="Unglobalization of licenses allowed"; 
$LANG["setup"][280]="Automatic update of the elements related to the computers"; 
$LANG["setup"][281]="Connect / update behaviour"; 
$LANG["setup"][282]="Disconnect behaviour"; 
$LANG["setup"][283]="Copy"; 
$LANG["setup"][284]="Clear"; 
$LANG["setup"][300]="检查新版本是否可用"; 
$LANG["setup"][301]="新版本是可用的："; 
$LANG["setup"][302]="It is available at the GLPI website: <a href='http://glpi-project' target='_blank'>http://glpi-project.org</a>"; 
$LANG["setup"][303]="您拥有最新的可用版本"; 
$LANG["setup"][304]="Connection failed. If you use a proxy, please configure it."; 
$LANG["setup"][306]="检查升级"; 
$LANG["setup"][307]="从未"; 
$LANG["setup"][308]="每周"; 
$LANG["setup"][309]="每个月"; 
$LANG["setup"][310]="Impossible to connect to site."; 
$LANG["setup"][311]="Failed to connect to the proxy server"; 
$LANG["setup"][312]="No data available on the web site"; 
$LANG["setup"][350]="建立case的链接项目"; 
$LANG["setup"][351]="所有项目"; 
$LANG["setup"][352]="Linkable items to a ticket"; 
$LANG["setup"][360]="Automatic fields (marked by *)"; 
$LANG["setup"][401]="代理地址"; 
$LANG["setup"][402]="代理端口"; 
$LANG["setup"][403]="代理用户名"; 
$LANG["setup"][404]="代理密码"; 
$LANG["setup"][405]="Log updates of tickets adding follow-ups"; 
$LANG["setup"][406]="Personalization"; 
$LANG["setup"][407]="Helpdesk help link"; 
$LANG["setup"][408]="Central help link"; 
$LANG["setup"][409]="Default heading when adding a document to a ticket"; 
$LANG["setup"][503]="电话模型"; 
$LANG["setup"][504]="电话类型"; 
$LANG["setup"][505]="电话类型的电源"; 
$LANG["setup"][601]="LDAP值"; 
$LANG["setup"][603]="添加用户"; 
$LANG["setup"][604]="与一个组联合"; 
$LANG["setup"][605]="添加组"; 
$LANG["setup"][606]="Unable to add. The user already exists."; 
$LANG["setup"][607]="Associate to a profile"; 
$LANG["setup"][610]="Compulsory title of the ticket"; 
$LANG["setup"][611]="Compulsory ticket's content"; 
$LANG["setup"][612]="Compulsory ticket's category"; 
$LANG["setup"][701]="Select a plugin to configure"; 
$LANG["setup"][702]="plugin not compatible with this version"; 
$LANG["setup"][703]="General"; 
$LANG["setup"][704]="Notifications"; 
$LANG["setup"][800]="Mysql replicate"; 
$LANG["setup"][801]="Enable the replica"; 
$LANG["setup"][802]="Database"; 
$LANG["setup"][803]="Difference between master and slave"; 
$LANG["setup"][804]="Notify by e-mail if desynchronization"; 
$LANG["setup"][806]="Max difference between master and slave"; 
$LANG["setup"][807]="The slave base is desynchronized. The difference is of:"; 
$LANG["setup"][808]="Slave database out of sync!"; 
$LANG["setup"][809]="MySQL replica: read only"; 

$LANG["software"][3]="平台"; 
$LANG["software"][5]="Versions"; 
$LANG["software"][6]="Automatic addition"; 
$LANG["software"][11]="使用许可"; 
$LANG["software"][12]="添加使用许可…"; 
$LANG["software"][13]="找到使用许可"; 
$LANG["software"][14]="没有软件的使用许可。"; 
$LANG["software"][15]="为软件添加使用许可"; 
$LANG["software"][16]="序列号<br>'free - >自由使用许可<br>'global - >全局使用许可"; 
$LANG["software"][17]="安装了软件"; 
$LANG["software"][19]="安装"; 
$LANG["software"][20]="残余"; 
$LANG["software"][25]="到期"; 
$LANG["software"][26]="未曾到期"; 
$LANG["software"][27]="使用许可过期"; 
$LANG["software"][28]="OEM"; 
$LANG["software"][29]="更新"; 
$LANG["software"][32]="失效"; 
$LANG["software"][34]="更新使用许可"; 
$LANG["software"][35]="买了"; 
$LANG["software"][36]="建立了更新"; 
$LANG["software"][37]="买"; 
$LANG["software"][38]="全局使用许可"; 
$LANG["software"][39]="免费软件"; 
$LANG["software"][40]="没有使用许可"; 
$LANG["software"][42]="根据模板添加新软件"; 
$LANG["software"][43]="添加购买许可"; 
$LANG["software"][44]="安装软件"; 
$LANG["software"][45]="卸载软件"; 
$LANG["software"][46]="Visible in Helpdesk"; 

$LANG["softwarecategories"][1]="Folded up"; 
$LANG["softwarecategories"][2]="Unfolded"; 
$LANG["softwarecategories"][3]="Software without category"; 
$LANG["softwarecategories"][4]="Categorized software"; 
$LANG["softwarecategories"][5]="Category of Software"; 

$LANG["state"][0]="状态"; 
$LANG["state"][6]="项目类型"; 
$LANG["state"][7]="没有找到项目"; 
$LANG["state"][11]="综合"; 

$LANG["stats"][0]="选择显示的统计"; 
$LANG["stats"][1]="全局"; 
$LANG["stats"][3]="每个项目"; 
$LANG["stats"][5]="case的数量"; 
$LANG["stats"][6]="平均决议延迟"; 
$LANG["stats"][11]="解决的case的数量"; 
$LANG["stats"][13]="case的数量"; 
$LANG["stats"][15]="平均决议延迟"; 
$LANG["stats"][16]="工程师名字"; 
$LANG["stats"][20]="用户名"; 
$LANG["stats"][23]="没有可用的统计"; 
$LANG["stats"][25]="case真正持续时间的平均值"; 
$LANG["stats"][26]="键入"; 
$LANG["stats"][27]="case真正的持续时间的合计"; 
$LANG["stats"][30]="考虑到case的平均延迟"; 
$LANG["stats"][31]="天"; 
$LANG["stats"][33]="分钟"; 
$LANG["stats"][34]="秒"; 
$LANG["stats"][35]="case"; 
$LANG["stats"][44]="Supplier Name"; 
$LANG["stats"][45]="由硬件"; 
$LANG["stats"][46]="由硬件统计"; 
$LANG["stats"][47]="由case"; 
$LANG["stats"][48]="(分配)"; 
$LANG["stats"][49]="(后续)"; 

$LANG["title"][0]="指挥中心"; 
$LANG["title"][1]="仅服务台通入"; 
$LANG["title"][5]="知识库"; 
$LANG["title"][6]="网络"; 
$LANG["title"][9]="项目状态"; 
$LANG["title"][10]="case后续"; 
$LANG["title"][13]="用户信息"; 
$LANG["title"][14]="外在认证来源"; 
$LANG["title"][15]="邮件支持"; 
$LANG["title"][24]="协助"; 
$LANG["title"][26]="主要"; 
$LANG["title"][27]="连接"; 
$LANG["title"][28]="case"; 
$LANG["title"][30]="部件"; 
$LANG["title"][33]="外部链接"; 
$LANG["title"][34]="链接"; 
$LANG["title"][37]="注意"; 
$LANG["title"][38]="历史"; 
$LANG["title"][40]="公开和个人笔记"; 
$LANG["title"][42]="重大修改"; 
$LANG["title"][43]="Registry"; 

$LANG["tracking"][1]="我的设备"; 
$LANG["tracking"][2]="或完成检索"; 
$LANG["tracking"][3]="Invalid dates. Update cancelled."; 
$LANG["tracking"][8]="No description for your ticket, please retry."; 
$LANG["tracking"][24]="文件case"; 
$LANG["tracking"][29]="数字"; 
$LANG["tracking"][30]="新"; 
$LANG["tracking"][31]="处理(被分配)"; 
$LANG["tracking"][32]="处理(计划)"; 
$LANG["tracking"][34]="指挥"; 
$LANG["tracking"][35]="写道"; 
$LANG["tracking"][37]="Keep tickets when purging hardware in the inventory"; 
$LANG["tracking"][38]="An email was sent to"; 

$LANG["transfer"][1]="Transference"; 
$LANG["transfer"][2]="Add a transfer configuration"; 
$LANG["transfer"][3]="If not used"; 
$LANG["transfer"][4]="To empty the list of the elements to be transferred"; 
$LANG["transfer"][5]="You can continue to add elements to be transferred or transfer as of now these elements"; 
$LANG["transfer"][6]="Think of making a backup before transferring items."; 
$LANG["transfer"][7]="Items to transfer"; 
$LANG["transfer"][8]="Transfer mode"; 

$LANG["update"][88]="您的数据库版本与安装的代码版本不兼容。需要更新。"; 
$LANG["update"][89]="您正在用一个为更高版本设计的数据库使用GLPI。 请安装对应于您数据库的版本。"; 
$LANG["update"][90]="数据库更新期间的错误"; 
$LANG["update"][91]="注意!"; 
$LANG["update"][92]="您将更新的GLPI数据库名为："; 
$LANG["update"][93]="数据库连接成功"; 
$LANG["update"][94]="更新成功，您的数据库已更新"; 
$LANG["update"][95]="与数据库的连接发生了故障，验证包含在config_db.php文件中的连接参数"; 
$LANG["update"][96]="现在，所有管理员有超级管理权限。 新用户类型也添加了。"; 
$LANG["update"][105]="这样不能更新!!"; 
$LANG["update"][106]="返回到GLPI"; 
$LANG["update"][107]="您必须现在更新您的数据库内容"; 
$LANG["update"][130]="地点更新"; 
$LANG["update"][131]="新结构是分级的"; 
$LANG["update"][132]="如果您用了一个分裂字符，您可以设置它为自动添加新阶层。"; 
$LANG["update"][133]="您也可以指定一个包括所有生成地点的根地点。"; 
$LANG["update"][134]="分裂的字符"; 
$LANG["update"][135]="根地点"; 
$LANG["update"][136]="这是添加的新阶层，如果OK，请确认"; 
$LANG["update"][137]="添加新阶层"; 
$LANG["update"][138]="实际地点"; 
?>