This is openocd.info, produced by makeinfo version 4.13 from
openocd.texi.

INFO-DIR-SECTION Development
START-INFO-DIR-ENTRY
* OpenOCD: (openocd).      OpenOCD User's Guide
END-INFO-DIR-ENTRY


This User's Guide documents release 0.6.0, dated 7 September 2012, of
the Open On-Chip Debugger (OpenOCD).

   * Copyright (C) 2008 The OpenOCD Project

   * Copyright (C) 2007-2008 Spencer Oliver <spen@spen-soft.co.uk>

   * Copyright (C) 2008-2010 Oyvind Harboe <oyvind.harboe@zylin.com>

   * Copyright (C) 2008 Duane Ellis <openocd@duaneellis.com>

   * Copyright (C) 2009-2010 David Brownell

     Permission is granted to copy, distribute and/or modify this
     document under the terms of the GNU Free Documentation License,
     Version 1.2 or any later version published by the Free Software
     Foundation; with no Invariant Sections, with no Front-Cover Texts,
     and with no Back-Cover Texts.  A copy of the license is included
     in the section entitled "GNU Free Documentation License".


Indirect:
openocd.info-1: 1003
openocd.info-2: 313138

Tag Table:
(Indirect)
Node: Top1003
Node: About3459
Node: Developers7759
Node: Debug Adapter Hardware10465
Node: About Jim-Tcl20431
Node: Running22565
Node: OpenOCD Project Setup27435
Ref: OpenOCD Project Setup-Footnote-147253
Ref: OpenOCD Project Setup-Footnote-247590
Ref: OpenOCD Project Setup-Footnote-347855
Node: Config File Guidelines48180
Ref: The init_board procedure68645
Ref: Define CPU targets working in SMP75397
Ref: The init_targets procedure79822
Ref: Translating Configuration Files83002
Ref: Config File Guidelines-Footnote-184223
Node: Daemon Configuration84295
Ref: Configuration Stage84617
Ref: Entering the Run Stage85469
Ref: TCP/IP Ports87916
Ref: GDB Configuration90169
Ref: gdb_breakpoint_override90453
Ref: gdb_flash_program90828
Ref: Event Polling91687
Node: Debug Adapter Configuration94109
Ref: JTAG Speed115732
Node: Reset Configuration118673
Ref: SRST and TRST Issues121580
Node: TAP Declaration132881
Ref: jtag newtap138293
Ref: TAP Events142894
Ref: Enabling and Disabling TAPs144393
Ref: Autoprobing147043
Ref: TAP Declaration-Footnote-1149733
Node: CPU Configuration149930
Ref: target types154054
Ref: Target Configuration156075
Ref: target curstate164936
Ref: Target Events166148
Node: Flash Commands171017
Ref: NOR Configuration172538
Ref: flash erase_sector176655
Ref: flash write_bank178362
Ref: flash write_image178586
Ref: flash protect180715
Ref: Flash Driver List181073
Ref: at91sam3184190
Ref: Flash Commands-Footnote-1207272
Ref: Flash Commands-Footnote-2207435
Node: NAND Flash Commands207597
Ref: NAND Configuration210566
Ref: NAND Driver List220932
Node: PLD/FPGA Commands225632
Node: General Commands227696
Ref: debug_level229639
Ref: Target State handling230565
Ref: Reset Command234221
Ref: Memory access236490
Ref: Image access238117
Ref: dump_image238174
Ref: load_image239154
Node: Architecture and Core Commands242457
Ref: ARM Hardware Tracing242927
Ref: Trace Port Drivers250832
Ref: arm7_9 fast_memory_access257422
Ref: arm9 vector_catch258731
Ref: xscale vector_catch267138
Ref: xscale vector_table267658
Ref: Software Debug Messages and Tracing273272
Node: JTAG Commands276725
Node: Boundary Scan Commands285185
Node: TFTP287635
Node: GDB and OpenOCD288507
Ref: Connecting to GDB289480
Ref: Using openocd SMP with GDB294680
Node: Tcl Scripting API296089
Node: FAQ298750
Ref: FAQ RTCK298860
Ref: FAQ TAP Order311366
Node: Tcl Crash Course313138
Node: License325140
Node: OpenOCD Concept Index347570
Node: Command and Driver Index364260

End Tag Table
