;;; loaddefs.el --- define standard autoloads and keys of other files

;; Copyright (C) 1985,86,87,92,93,94,95,96 Free Software Foundation, Inc.

;; Maintainer: FSF
;; Keywords: internal

;; This file is part of GNU Emacs.

;; GNU Emacs is free software; you can redistribute it and/or modify
;; it under the terms of the GNU General Public License as published by
;; the Free Software Foundation; either version 2, or (at your option)
;; any later version.

;; GNU Emacs is distributed in the hope that it will be useful,
;; but WITHOUT ANY WARRANTY; without even the implied warranty of
;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
;; GNU General Public License for more details.

;; You should have received a copy of the GNU General Public License
;; along with GNU Emacs; see the file COPYING.  If not, write to
;; the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
;; Boston, MA 02111-1307, USA.

;;; Commentary:

;;; !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
;;; Special formatting conventions are used in this file!
;;;
;;; a backslash-newline is used at the beginning of a documentation string
;;; when that string should be stored in the file etc/DOCnnn, not in core.
;;;
;;; Such strings read into Lisp as numbers (during the pure-loading phase).
;;;
;;; But you must obey certain rules to make sure the string is understood
;;; and goes into etc/DOCnnn properly.  Otherwise, the string will not go
;;; anywhere!
;;;
;;; The doc string must appear in the standard place in a call to
;;; defun, autoload, defvar or defconst.  No Lisp macros are recognized.
;;; The open-paren starting the definition must appear in column 0.
;;;
;;; In defvar and defconst, there is an additional rule:
;;; The double-quote that starts the string must be on the same
;;; line as the defvar or defconst.
;;; !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

;;; **********************************************************************
;;; You should never need to write autoloads by hand and put them here.
;;;
;;; It is no longer necessary.  Instead use autoload.el to maintain them
;;; for you.  Just insert ";;;###autoload" before defuns or defmacros you
;;; want to be autoloaded, or other forms you want copied into loaddefs.el
;;; (defvars, key definitions, etc.).  For example,
;;;	;;;###autoload
;;;	(defun foobar () ....)
;;;	;;;###autoload (define-key global-map "f" 'foobar)
;;;	;;;###autoload
;;;	(defvar foobar-var nil "\
;;;	This is foobar-var's doc-string.")
;;;
;;; Then do M-x update-file-autoloads on the file to update loaddefs.el.
;;;
;;; You can also use M-x update-autoloads-from-directory to update the
;;; autoloads in loaddefs.el for all .el files in the directory specified.
;;; **********************************************************************

;;; Code:

;;; This code was NOT generated by autoload.el.

;; 92.10.16 by K.Handa
(defvar user-init-filename ".emacs" "\
User's init file name.")

;; <MULE-COMMENT>
;; This variable is added to specify null device name in more
;; flexible way than hard coded string.  The null device is "nul"
;; under MS-DOS.
;; (by Mineharu Takahara mtakahar@jp.oracle.com)
;; </MULE-COMMENT>
(defvar null-filename (if (eq system-type 'ms-dos) "nul" "/dev/null") "\
Null file name.")

(defvar backup-filename "~/%backup%~" "\
Backup file name.")

(defvar shell-command-option "-c" "\
Shell command option")
;; end of patch

(defconst mode-line-buffer-identification (purecopy '("%F: %12b"))
  "Mode-line control for identifying the buffer being displayed.
Its default value is (\"%F: %12b\").  Under X, `%F' is replaced with `Emacs'.
Major modes that edit things other than ordinary files may change this
\(e.g. Info, Dired,...)")

(make-variable-buffer-local 'mode-line-buffer-identification)

(defconst mode-line-process nil
  "Mode-line control for displaying info on process status.
Normally nil in most modes, since there is no process to display.")

(make-variable-buffer-local 'mode-line-process)

(defconst mode-line-modified (purecopy '("--%1*%1+-"))
  "Mode-line control for displaying whether current buffer is modified.")

(make-variable-buffer-local 'mode-line-modified)

(setq-default mode-line-format
  (list (purecopy "")
   'mode-line-modified
   'mode-line-buffer-identification
   (purecopy "   ")
   'global-mode-string
   (purecopy "   %[(")
   'mode-name 'mode-line-process 'minor-mode-alist
   (purecopy "%n")
   (purecopy ")%]--")
   (purecopy '(line-number-mode "L%l--"))
   (purecopy '(column-number-mode "C%c--"))
   (purecopy '(-3 . "%p"))
   (purecopy "-%-")))

(defvar minor-mode-alist nil "\
Alist saying how to show minor modes in the mode line.
Each element looks like (VARIABLE STRING);
STRING is included in the mode line iff VARIABLE's value is non-nil.

Actually, STRING need not be a string; any possible mode-line element
is okay.  See `mode-line-format'.")
(setq minor-mode-alist (mapcar 'purecopy
			       '((abbrev-mode " Abbrev")
				 (overwrite-mode overwrite-mode)
				 (auto-fill-function " Fill")
				 ;; not really a minor mode...
				 (defining-kbd-macro " Def"))))

;; These variables are used by autoloadable packages.
;; They are defined here so that they do not get overridden
;; by the loading of those packages.

;; Names in directory that end in one of these
;; are ignored in completion,
;; making it more likely you will get a unique match.
(setq completion-ignored-extensions
      (cond ((or (eq system-type 'ms-dos) (eq system-type 'windows-nt))
	     '(".o" ".elc" "~" ".bin" ".bak" ".obj" ".map"
	       ".dvi" ".toc" ".log" ".aux" ".a" ".ln"
	       ".lof" ".blg" ".bbl" ".glo" ".idx" ".lot" ".fmt"))
	    ((eq system-type 'vax-vms)
	     '(".obj" ".elc" ".exe" ".bin" ".lbin" ".sbin"
	       ".dvi" ".toc" ".log" ".aux"
	       ".lof" ".brn" ".rnt" ".mem" ".lni" ".lis"
	       ".olb" ".tlb" ".mlb" ".hlb" ".glo" ".idx" ".lot" ".fmt"))
	    (t
	     '(".o" ".elc" "~" ".bin" ".lbin" ".fasl"
	       ".dvi" ".toc" ".log" ".aux" ".a" ".ln"
	       ".lof" ".blg" ".bbl" ".glo" ".idx" ".lot" ".fmt"))))

(setq debug-ignored-errors
      '(beginning-of-line beginning-of-buffer end-of-line
	end-of-buffer end-of-file buffer-read-only
      	"^Previous command was not a yank$"
	"^Minibuffer window is not active$"
	"^End of history; no next item$"
	"^Beginning of history; no preceding item$"
	"^No recursive edit is in progress$"
	"^Changes to be undone are outside visible portion of buffer$"
	"^No undo information in this buffer$"
	"^No further undo information$"
	"^Save not confirmed$"
	"^Recover-file cancelled\\.$"

	;; comint
	"^Not at command line$"
	"^Empty input ring$"
	"^No history$"
	"^Not found$";; To common?
	"^Current buffer has no process$"

	;; dabbrev
	"^No dynamic expansion for \".*\" found\\.$"
	"^No further dynamic expansions for \".*\" found\\.$"
	"^No further dynamic expansions for `.*' found$"

	;; Completion
	"^To complete, the point must be after a symbol at least [0-9]* character long\\.$"
	"^The string \".*\" is too short to be saved as a completion\\.$"

	;; Compile
	"^No more errors\\( yet\\|\\)$"

	;; Gnus
	"^NNTP: Connection closed\\.$"

	;; info
	"^Node has no Previous$"
	"^No \".*\" in index$"

	;; imenu
	"^No items suitable for an index found in this buffer\\.$"
	"^The mode \".*\" does not take full advantage of imenu\\.el yet\\.$"

	;; ispell
	"^No word found to check!$"

	;; mh-e
	"^Cursor not pointing to message$"
	"^There is no other window$"

	;; man
	"^No manpage [0-9]* found$"

	;; etags
	"^No tags table in use!  Use .* to select one\\.$"
	"^There is no default tag$"
	"^No previous tag locations$"
	"^File .* is not a valid tags table$"
	"^No \\(more \\|\\)tags \\(matching\\|containing\\) "
	"^Rerun etags: `.*' not found in "
	"^All files processed\\.$"
	"^No .* or .* in progress.$"
	"^File .* not in current tags tables$"
	"No tags table loaded."
	"^Nothing to complete$"

	;; BBDB
	"^no previous record$"
	"^no next record$"))


(make-variable-buffer-local 'indent-tabs-mode)

;; This is here to avoid autoloading etags on M-TAB.
;; M-x visit-tags-table will autoload etags, which will redefine complete-tag.
(defun complete-tag ()
  "Perform tags completion on the text around point.
Completes to the set of names listed in the current tags table.
The string to complete is chosen in the same way as the default
for \\[find-tag] (which see)."
  (interactive)
  (error (substitute-command-keys
	  "No tags table loaded.  Try \\[visit-tags-table].")))

;; Reduce total amount of space we must allocate during this function
;; that we will not need to keep permanently.
(garbage-collect)

(define-key ctl-x-map "n" (make-sparse-keymap))
(define-key ctl-x-map "r" (make-sparse-keymap))

(setq help-event-list '(help f1))

;These commands are defined in editfns.c
;but they are not assigned to keys there.
(put 'narrow-to-region 'disabled t)
(define-key ctl-x-map "nn" 'narrow-to-region)
(define-key ctl-x-map "nw" 'widen)
;; (define-key ctl-x-map "n" 'narrow-to-region)
;; (define-key ctl-x-map "w" 'widen)

(define-key global-map "\C-j" 'newline-and-indent)
(define-key global-map "\C-m" 'newline)
(define-key global-map "\C-o" 'open-line)
(define-key esc-map "\C-o" 'split-line)
(define-key global-map "\C-q" 'quoted-insert)
(define-key esc-map "^" 'delete-indentation)
(define-key esc-map "\\" 'delete-horizontal-space)
(define-key esc-map "m" 'back-to-indentation)
(define-key ctl-x-map "\C-o" 'delete-blank-lines)
(define-key esc-map " " 'just-one-space)
(define-key esc-map "z" 'zap-to-char)
(define-key esc-map "=" 'count-lines-region)
(define-key ctl-x-map "=" 'what-cursor-position)
(define-key esc-map ":" 'eval-expression)
;; Define ESC ESC : like ESC : for people who type ESC ESC out of habit.
(define-key esc-map "\M-:" 'eval-expression)
;; Changed from C-x ESC so that function keys work following C-x.
(define-key ctl-x-map "\e\e" 'repeat-complex-command)
;; New binding analogous to M-:.
(define-key ctl-x-map "\M-:" 'repeat-complex-command)
(define-key ctl-x-map "u" 'advertised-undo)
;; Many people are used to typing C-/ on X terminals and getting C-_.
(define-key global-map [?\C-/] 'undo)
(define-key global-map "\C-_" 'undo)
(define-key esc-map "!" 'shell-command)
(define-key esc-map "|" 'shell-command-on-region)

;; This is an experiment--make up and down arrows do history.
(define-key minibuffer-local-map [up] 'previous-history-element)
(define-key minibuffer-local-map [down] 'next-history-element)
(define-key minibuffer-local-ns-map [up] 'previous-history-element)
(define-key minibuffer-local-ns-map [down] 'next-history-element)
(define-key minibuffer-local-completion-map [up] 'previous-history-element)
(define-key minibuffer-local-completion-map [down] 'next-history-element)
(define-key minibuffer-local-must-match-map [up] 'previous-history-element)
(define-key minibuffer-local-must-match-map [down] 'next-history-element)

(define-key global-map "\C-u" 'universal-argument)
(let ((i ?0))
  (while (<= i ?9)
    (define-key esc-map (char-to-string i) 'digit-argument)
    (setq i (1+ i))))
(define-key esc-map "-" 'negative-argument)
;; Define control-digits.
(let ((i ?0))
  (while (<= i ?9)
    (define-key global-map (read (format "[?\\C-%c]" i)) 'digit-argument)
    (setq i (1+ i))))
(define-key global-map [?\C--] 'negative-argument)
;; Define control-meta-digits.
(let ((i ?0))
  (while (<= i ?9)
    (define-key esc-map (read (format "[?\\C-%c]" i)) 'digit-argument)
    (setq i (1+ i))))
(define-key global-map [?\C-\M--] 'negative-argument)

(define-key global-map "\C-k" 'kill-line)
(define-key global-map "\C-w" 'kill-region)
(define-key esc-map "w" 'kill-ring-save)
(define-key esc-map "\C-w" 'append-next-kill)
(define-key global-map "\C-y" 'yank)
(define-key esc-map "y" 'yank-pop)

;; (define-key ctl-x-map "a" 'append-to-buffer)

(define-key global-map "\C-@" 'set-mark-command)
;; Many people are used to typing C-SPC and getting C-@.
(define-key global-map [?\C-\ ] 'set-mark-command)
(define-key ctl-x-map "\C-x" 'exchange-point-and-mark)
(define-key ctl-x-map "\C-@" 'pop-global-mark)
(define-key ctl-x-map [?\C-\ ] 'pop-global-mark)

(define-key global-map "\C-n" 'next-line)
(define-key global-map "\C-p" 'previous-line)
(define-key ctl-x-map "\C-n" 'set-goal-column)

;;(defun function-key-error ()
;;  (interactive)
;;  (error "That function key is not bound to anything."))

(define-key global-map [menu] 'execute-extended-command)
(define-key global-map [find] 'search-forward)

;; natural bindings for terminal keycaps --- defined in X keysym order
(define-key global-map [home]		'beginning-of-buffer)
(define-key global-map [M-home]		'beginning-of-buffer-other-window)
(define-key global-map [left]		'backward-char)
(define-key global-map [up]		'previous-line)
(define-key global-map [right]		'forward-char)
(define-key global-map [down]		'next-line)
(define-key global-map [prior]		'scroll-down)
(define-key global-map [next]		'scroll-up)
(define-key global-map [C-up]		'backward-paragraph)
(define-key global-map [C-down]		'forward-paragraph)
(define-key global-map [C-prior]	'scroll-right)
(define-key global-map [C-next]		'scroll-left)
(define-key global-map [M-next]		'scroll-other-window)
(define-key global-map [M-prior]	'scroll-other-window-down)
(define-key global-map [end]		'end-of-buffer)
(define-key global-map [M-end]		'end-of-buffer-other-window)
(define-key global-map [begin]		'beginning-of-buffer)
(define-key global-map [M-begin]	'beginning-of-buffer-other-window)
;; (define-key global-map [select]	'function-key-error)
;; (define-key global-map [print]	'function-key-error)
(define-key global-map [execute]	'execute-extended-command)
(define-key global-map [insert]		'overwrite-mode)
(define-key global-map [C-insert]	'kill-ring-save)
(define-key global-map [S-insert]	'yank)
(define-key global-map [undo]		'undo)
(define-key global-map [redo]		'repeat-complex-command)
;; (define-key global-map [clearline]	'function-key-error)
(define-key global-map [insertline]	'open-line)
(define-key global-map [deleteline]	'kill-line)
;; (define-key global-map [insertchar]	'function-key-error)
(define-key global-map [deletechar]	'delete-char)
;; (define-key global-map [backtab]	'function-key-error)
;; (define-key global-map [f1]		'function-key-error)
;; (define-key global-map [f2]		'function-key-error)
;; (define-key global-map [f3]		'function-key-error)
;; (define-key global-map [f4]		'function-key-error)
;; (define-key global-map [f5]		'function-key-error)
;; (define-key global-map [f6]		'function-key-error)
;; (define-key global-map [f7]		'function-key-error)
;; (define-key global-map [f8]		'function-key-error)
;; (define-key global-map [f9]		'function-key-error)
;; (define-key global-map [f10]		'function-key-error)
;; (define-key global-map [f11]		'function-key-error)
;; (define-key global-map [f12]		'function-key-error)
;; (define-key global-map [f13]		'function-key-error)
;; (define-key global-map [f14]		'function-key-error)
;; (define-key global-map [f15]		'function-key-error)
;; (define-key global-map [f16]		'function-key-error)
;; (define-key global-map [f17]		'function-key-error)
;; (define-key global-map [f18]		'function-key-error)
;; (define-key global-map [f19]		'function-key-error)
;; (define-key global-map [f20]		'function-key-error)
;; (define-key global-map [f21]		'function-key-error)
;; (define-key global-map [f22]		'function-key-error)
;; (define-key global-map [f23]		'function-key-error)
;; (define-key global-map [f24]		'function-key-error)
;; (define-key global-map [f25]		'function-key-error)
;; (define-key global-map [f26]		'function-key-error)
;; (define-key global-map [f27]		'function-key-error)
;; (define-key global-map [f28]		'function-key-error)
;; (define-key global-map [f29]		'function-key-error)
;; (define-key global-map [f30]		'function-key-error)
;; (define-key global-map [f31]		'function-key-error)
;; (define-key global-map [f32]		'function-key-error)
;; (define-key global-map [f33]		'function-key-error)
;; (define-key global-map [f34]		'function-key-error)
;; (define-key global-map [f35]		'function-key-error)
;; (define-key global-map [kp-backtab]	'function-key-error)
;; (define-key global-map [kp-space]	'function-key-error)
;; (define-key global-map [kp-tab]		'function-key-error)
;; (define-key global-map [kp-enter]	'function-key-error)
;; (define-key global-map [kp-f1]		'function-key-error)
;; (define-key global-map [kp-f2]		'function-key-error)
;; (define-key global-map [kp-f3]		'function-key-error)
;; (define-key global-map [kp-f4]		'function-key-error)
;; (define-key global-map [kp-multiply]	'function-key-error)
;; (define-key global-map [kp-add]		'function-key-error)
;; (define-key global-map [kp-separator]	'function-key-error)
;; (define-key global-map [kp-subtract]	'function-key-error)
;; (define-key global-map [kp-decimal]	'function-key-error)
;; (define-key global-map [kp-divide]	'function-key-error)
;; (define-key global-map [kp-0]		'function-key-error)
;; (define-key global-map [kp-1]		'function-key-error)
;; (define-key global-map [kp-2]		'function-key-error)
;; (define-key global-map [kp-3]		'function-key-error)
;; (define-key global-map [kp-4]		'function-key-error)
;; (define-key global-map [kp-5]		'recenter)
;; (define-key global-map [kp-6]		'function-key-error)
;; (define-key global-map [kp-7]		'function-key-error)
;; (define-key global-map [kp-8]		'function-key-error)
;; (define-key global-map [kp-9]		'function-key-error)
;; (define-key global-map [kp-equal]	'function-key-error)

;; X11R6 distinguishes these keys from the non-kp keys.
;; Make them behave like the non-kp keys unless otherwise bound.
(define-key function-key-map [kp-home] [home])
(define-key function-key-map [kp-left] [left])
(define-key function-key-map [kp-up] [up])
(define-key function-key-map [kp-right] [right])
(define-key function-key-map [kp-down] [down])
(define-key function-key-map [kp-prior] [prior])
(define-key function-key-map [kp-next] [next])
(define-key function-key-map [M-kp-next] [M-next])
(define-key function-key-map [kp-end] [end])
(define-key function-key-map [kp-begin] [begin])
(define-key function-key-map [kp-insert] [insert])
(define-key function-key-map [kp-delete] [delete])

(define-key global-map [mouse-movement] 'ignore)

(define-key global-map "\C-t" 'transpose-chars)
(define-key esc-map "t" 'transpose-words)
(define-key esc-map "\C-t" 'transpose-sexps)
(define-key ctl-x-map "\C-t" 'transpose-lines)

(define-key esc-map ";" 'indent-for-comment)
(define-key esc-map "j" 'indent-new-comment-line)
(define-key esc-map "\C-j" 'indent-new-comment-line)
(define-key ctl-x-map ";" 'set-comment-column)
(define-key ctl-x-map "f" 'set-fill-column)
(define-key ctl-x-map "$" 'set-selective-display)

(define-key esc-map "@" 'mark-word)
(define-key esc-map "f" 'forward-word)
(define-key esc-map "b" 'backward-word)
(define-key esc-map "d" 'kill-word)
(define-key esc-map "\177" 'backward-kill-word)

(define-key esc-map "<" 'beginning-of-buffer)
(define-key esc-map ">" 'end-of-buffer)
(define-key ctl-x-map "h" 'mark-whole-buffer)
(define-key esc-map "\\" 'delete-horizontal-space)

(defalias 'mode-specific-command-prefix (make-sparse-keymap))
(defconst mode-specific-map (symbol-function 'mode-specific-command-prefix)
  "Keymap for characters following C-c.")
(define-key global-map "\C-c" 'mode-specific-command-prefix)

(global-set-key [M-right]  'forward-word)
(global-set-key [M-left]   'backward-word)
;; ilya@math.ohio-state.edu says these bindings are standard on PC editors.
(global-set-key [C-right]  'forward-word)
(global-set-key [C-left]   'backward-word)
;; This is not quite compatible, but at least is analogous
(global-set-key [C-delete]   'backward-kill-word)
;; This is "move to the clipboard", or as close as we come.
(global-set-key [S-delete] 'kill-region)

(define-key esc-map "\C-f" 'forward-sexp)
(define-key esc-map "\C-b" 'backward-sexp)
(define-key esc-map "\C-u" 'backward-up-list)
(define-key esc-map "\C-@" 'mark-sexp)
(define-key esc-map [?\C-\ ] 'mark-sexp)
(define-key esc-map "\C-d" 'down-list)
(define-key esc-map "\C-k" 'kill-sexp)
(define-key global-map [C-M-delete] 'backward-kill-sexp)
(define-key global-map [C-M-backspace] 'backward-kill-sexp)
(define-key esc-map "\C-n" 'forward-list)
(define-key esc-map "\C-p" 'backward-list)
(define-key esc-map "\C-a" 'beginning-of-defun)
(define-key esc-map "\C-e" 'end-of-defun)
(define-key esc-map "\C-h" 'mark-defun)
(define-key esc-map "(" 'insert-parentheses)
(define-key esc-map ")" 'move-past-close-and-reindent)
(define-key esc-map "\t" 'lisp-complete-symbol)

(define-key ctl-x-map "\C-e" 'eval-last-sexp)

(define-key ctl-x-map "r\C-@" 'point-to-register)
(define-key ctl-x-map [?r ?\C-\ ] 'point-to-register)
(define-key ctl-x-map "r " 'point-to-register)
(define-key ctl-x-map "rj" 'jump-to-register)
(define-key ctl-x-map "rs" 'copy-to-register)
(define-key ctl-x-map "rx" 'copy-to-register)
(define-key ctl-x-map "ri" 'insert-register)
(define-key ctl-x-map "rg" 'insert-register)
(define-key ctl-x-map "rr" 'copy-rectangle-to-register)
(define-key ctl-x-map "rc" 'clear-rectangle)
(define-key ctl-x-map "rk" 'kill-rectangle)
(define-key ctl-x-map "rd" 'delete-rectangle)
(define-key ctl-x-map "ry" 'yank-rectangle)
(define-key ctl-x-map "ro" 'open-rectangle)
(define-key ctl-x-map "rt" 'string-rectangle)
(define-key ctl-x-map "rw" 'window-configuration-to-register)
(define-key ctl-x-map "rf" 'frame-configuration-to-register)

;; These key bindings are deprecated; use the above C-x r map instead.
;; We use these aliases so \[...] will show the C-x r bindings instead.
(defalias 'point-to-register-compatibility-binding 'point-to-register)
(defalias 'jump-to-register-compatibility-binding 'jump-to-register)
(defalias 'copy-to-register-compatibility-binding 'copy-to-register)
(defalias 'insert-register-compatibility-binding 'insert-register)
(define-key ctl-x-map "/" 'point-to-register-compatibility-binding)
(define-key ctl-x-map "j" 'jump-to-register-compatibility-binding)
(define-key ctl-x-map "x" 'copy-to-register-compatibility-binding)
(define-key ctl-x-map "g" 'insert-register-compatibility-binding)
;; (define-key ctl-x-map "r" 'copy-rectangle-to-register)

(define-key esc-map "q" 'fill-paragraph)
;; (define-key esc-map "g" 'fill-region)
(define-key ctl-x-map "." 'set-fill-prefix)

(define-key esc-map "{" 'backward-paragraph)
(define-key esc-map "}" 'forward-paragraph)
(define-key esc-map "h" 'mark-paragraph)
(define-key esc-map "a" 'backward-sentence)
(define-key esc-map "e" 'forward-sentence)
(define-key esc-map "k" 'kill-sentence)
(define-key ctl-x-map "\177" 'backward-kill-sentence)

(define-key ctl-x-map "[" 'backward-page)
(define-key ctl-x-map "]" 'forward-page)
(define-key ctl-x-map "\C-p" 'mark-page)
(define-key ctl-x-map "l" 'count-lines-page)
(define-key ctl-x-map "np" 'narrow-to-page)
;; (define-key ctl-x-map "p" 'narrow-to-page)

(define-key ctl-x-map "al" 'add-mode-abbrev)
(define-key ctl-x-map "a\C-a" 'add-mode-abbrev)
(define-key ctl-x-map "ag" 'add-global-abbrev)
(define-key ctl-x-map "a+" 'add-mode-abbrev)
(define-key ctl-x-map "aig" 'inverse-add-global-abbrev)
(define-key ctl-x-map "ail" 'inverse-add-mode-abbrev)
;; (define-key ctl-x-map "a\C-h" 'inverse-add-global-abbrev)
(define-key ctl-x-map "a-" 'inverse-add-global-abbrev)
(define-key ctl-x-map "ae" 'expand-abbrev)
(define-key ctl-x-map "a'" 'expand-abbrev)
;; (define-key ctl-x-map "\C-a" 'add-mode-abbrev)
;; (define-key ctl-x-map "\+" 'add-global-abbrev)
;; (define-key ctl-x-map "\C-h" 'inverse-add-mode-abbrev)
;; (define-key ctl-x-map "\-" 'inverse-add-global-abbrev)
(define-key esc-map "'" 'abbrev-prefix-mark)
(define-key ctl-x-map "'" 'expand-abbrev)


;;; Generated autoloads follow (made by autoload.el).

;;; To sort them, execute the following after narrowing
;;; to a region starting just after the following formfeed (control-l)
;;; and ending just after the last formfeed in the file.

;;;(sort-regexp-fields nil "\n*.*\n.*from \\(.*\\)[^]*" "\\1"
;;;		    (point-min) (point-max))

;;;### (autoloads (ada-make-filename-from-adaname ada-mode) "ada-mode" "ada-mode.el" (12575 62769))
;;; Generated autoloads from ada-mode.el

(autoload (quote ada-mode) "ada-mode" "\
Ada Mode is the major mode for editing Ada code.

Bindings are as follows: (Note: 'LFD' is control-j.)

 Indent line                                          '\\[ada-tab]'
 Indent line, insert newline and indent the new line. '\\[newline-and-indent]'

 Re-format the parameter-list point is in             '\\[ada-format-paramlist]'
 Indent all lines in region                           '\\[ada-indent-region]'
 Call external pretty printer program                 '\\[ada-call-pretty-printer]'

 Adjust case of identifiers and keywords in region    '\\[ada-adjust-case-region]'
 Adjust case of identifiers and keywords in buffer    '\\[ada-adjust-case-buffer]'

 Call EXTERNAL pretty printer (if you have one)       '\\[ada-call-pretty-printer]'

 Fill comment paragraph                               '\\[ada-fill-comment-paragraph]'
 Fill comment paragraph and justify each line         '\\[ada-fill-comment-paragraph-justify]'
 Fill comment paragraph, justify and append postfix   '\\[ada-fill-comment-paragraph-postfix]'

 Next func/proc/task '\\[ada-next-procedure]'    Previous func/proc/task '\\[ada-previous-procedure]'
 Next package        '\\[ada-next-package]'  Previous package        '\\[ada-previous-package]'

 Goto matching start of current 'end ...;'            '\\[ada-move-to-start]'
 Goto end of current block                            '\\[ada-move-to-end]'

Comments are handled using standard GNU Emacs conventions, including:
 Start a comment                                      '\\[indent-for-comment]'
 Comment region                                       '\\[comment-region]'
 Uncomment region                                     '\\[ada-uncomment-region]'
 Continue comment on next line                        '\\[indent-new-comment-line]'

If you use imenu.el:
 Display index-menu of functions & procedures         '\\[imenu]'

If you use find-file.el:
 Switch to other file (Body <-> Spec)                 '\\[ff-find-other-file]'
                                                   or '\\[ff-mouse-find-other-file]
 Switch to other file in other window                 '\\[ada-ff-other-window]'
                                                   or '\\[ff-mouse-find-other-file-other-window]
 If you use this function in a spec and no body is available, it gets created
 with body stubs.

If you use ada-xref.el:
 Goto declaration:          '\\[ada-point-and-xref]' on the identifier
                         or '\\[ada-goto-declaration]' with point on the identifier
 Complete identifier:       '\\[ada-complete-identifier]'
 Execute Gnatf:             '\\[ada-gnatf-current]'" t nil)

(autoload (quote ada-make-filename-from-adaname) "ada-mode" "\
Determine the filename of a package/procedure from its own Ada name." t nil)

;;;***

;;;### (autoloads (add-log-current-defun change-log-mode add-change-log-entry-other-window add-change-log-entry find-change-log prompt-for-change-log-name) "add-log" "add-log.el" (12755 36002))
;;; Generated autoloads from add-log.el

(defvar add-log-full-name nil "\
*Full name of user, for inclusion in ChangeLog daily headers.
This defaults to the value returned by the `user-full-name' function.")

(defvar add-log-mailing-address nil "\
*Electronic mail address of user, for inclusion in ChangeLog daily headers.
This defaults to the value of `user-mail-address'.")

(autoload (quote prompt-for-change-log-name) "add-log" "\
Prompt for a change log name." nil nil)

(autoload (quote find-change-log) "add-log" "\
Find a change log file for \\[add-change-log-entry] and return the name.

Optional arg FILE-NAME specifies the file to use.
If FILE-NAME is nil, use the value of `change-log-default-name'.
If 'change-log-default-name' is nil, behave as though it were 'ChangeLog'
\(or whatever we use on this operating system).

If 'change-log-default-name' contains a leading directory component, then
simply find it in the current directory.  Otherwise, search in the current 
directory and its successive parents for a file so named.

Once a file is found, `change-log-default-name' is set locally in the
current buffer to the complete file name." nil nil)

(autoload (quote add-change-log-entry) "add-log" "\
Find change log file and add an entry for today.
Optional arg (interactive prefix) non-nil means prompt for user name and site.
Second arg is file name of change log.  If nil, uses `change-log-default-name'.
Third arg OTHER-WINDOW non-nil means visit in other window.
Fourth arg NEW-ENTRY non-nil means always create a new entry at the front;
never append to an existing entry." t nil)

(autoload (quote add-change-log-entry-other-window) "add-log" "\
Find change log file in other window and add an entry for today.
Optional arg (interactive prefix) non-nil means prompt for user name and site.
Second arg is file name of change log.  If nil, uses `change-log-default-name'." t nil)
 (define-key ctl-x-4-map "a" 'add-change-log-entry-other-window)

(autoload (quote change-log-mode) "add-log" "\
Major mode for editing change logs; like Indented Text Mode.
Prevents numeric backups and sets `left-margin' to 8 and `fill-column' to 74.
New log entries are usually made with \\[add-change-log-entry] or \\[add-change-log-entry-other-window].
Each entry behaves as a paragraph, and the entries for one day as a page.
Runs `change-log-mode-hook'." t nil)

(autoload (quote add-log-current-defun) "add-log" "\
Return name of function definition point is in, or nil.

Understands C, Lisp, LaTeX (\"functions\" are chapters, sections, ...),
Texinfo (@node titles), Perl, and Fortran.

Other modes are handled by a heuristic that looks in the 10K before
point for uppercase headings starting in the first column or
identifiers followed by `:' or `=', see variable
`add-log-current-defun-header-regexp'.

Has a preference of looking backwards." nil nil)

;;;***

;;;### (autoloads (defadvice ad-add-advice) "advice" "advice.el" (12545 51456))
;;; Generated autoloads from advice.el

(defvar ad-redefinition-action (quote warn) "\
*Defines what to do with redefinitions during Advice de/activation.
Redefinition occurs if a previously activated function that already has an
original definition associated with it gets redefined and then de/activated.
In such a case we can either accept the current definition as the new
original definition, discard the current definition and replace it with the
old original, or keep it and raise an error.  The values `accept', `discard',
`error' or `warn' govern what will be done.  `warn' is just like `accept' but
it additionally prints a warning message.  All other values will be
interpreted as `error'.")

(defvar ad-default-compilation-action (quote maybe) "\
*Defines whether to compile advised definitions during activation.
A value of `always' will result in unconditional compilation, `never' will
always avoid compilation, `maybe' will compile if the byte-compiler is already
loaded, and `like-original' will compile if the original definition of the
advised function is compiled or a built-in function. Every other value will
be interpreted as `maybe'. This variable will only be considered if the 
COMPILE argument of `ad-activate' was supplied as nil.")

(autoload (quote ad-add-advice) "advice" "\
Adds a piece of ADVICE to FUNCTION's list of advices in CLASS.
If FUNCTION already has one or more pieces of advice of the specified
CLASS then POSITION determines where the new piece will go.  The value
of POSITION can either be `first', `last' or a number where 0 corresponds
to `first'.  Numbers outside the range will be mapped to the closest
extreme position.  If there was already a piece of ADVICE with the same
name, then the position argument will be ignored and the old advice
will be overwritten with the new one.
    If the FUNCTION was not advised already, then its advice info will be 
initialized.  Redefining a piece of advice whose name is part of the cache-id
will clear the cache." nil nil)

(autoload (quote defadvice) "advice" "\
Defines a piece of advice for FUNCTION (a symbol).
The syntax of `defadvice' is as follows:

  (defadvice FUNCTION (CLASS NAME [POSITION] [ARGLIST] FLAG...)
    [DOCSTRING] [INTERACTIVE-FORM]
    BODY... )

FUNCTION ::= Name of the function to be advised.
CLASS ::= `before' | `around' | `after' | `activation' | `deactivation'.
NAME ::= Non-nil symbol that names this piece of advice.
POSITION ::= `first' | `last' | NUMBER. Optional, defaults to `first',
    see also `ad-add-advice'.
ARGLIST ::= An optional argument list to be used for the advised function
    instead of the argument list of the original.  The first one found in
    before/around/after-advices will be used.
FLAG ::= `protect'|`disable'|`activate'|`compile'|`preactivate'|`freeze'.
    All flags can be specified with unambiguous initial substrings.
DOCSTRING ::= Optional documentation for this piece of advice.
INTERACTIVE-FORM ::= Optional interactive form to be used for the advised
    function.  The first one found in before/around/after-advices will be used.
BODY ::= Any s-expression.

Semantics of the various flags:
`protect': The piece of advice will be protected against non-local exits in
any code that precedes it.  If any around-advice of a function is protected
then automatically all around-advices will be protected (the complete onion).

`activate': All advice of FUNCTION will be activated immediately if
FUNCTION has been properly defined prior to this application of `defadvice'.

`compile': In conjunction with `activate' specifies that the resulting
advised function should be compiled.

`disable': The defined advice will be disabled, hence, it will not be used 
during activation until somebody enables it.

`preactivate': Preactivates the advised FUNCTION at macro-expansion/compile
time.  This generates a compiled advised definition according to the current
advice state that will be used during activation if appropriate.  Only use
this if the `defadvice' gets actually compiled.

`freeze': Expands the `defadvice' into a redefining `defun/defmacro' according
to this particular single advice.  No other advice information will be saved.
Frozen advices cannot be undone, they behave like a hard redefinition of
the advised function.  `freeze' implies `activate' and `preactivate'.  The
documentation of the advised function can be dumped onto the `DOC' file
during preloading.

Look at the file `advice.el' for comprehensive documentation." nil (quote macro))

;;;***

;;;### (autoloads (ange-ftp-hook-function) "ange-ftp" "ange-ftp.el" (12796 58959))
;;; Generated autoloads from ange-ftp.el

(autoload (quote ange-ftp-hook-function) "ange-ftp" nil nil nil)

(or (assoc "^/[^/:]*[^/:.]:" file-name-handler-alist) (setq file-name-handler-alist (cons (quote ("^/[^/:]*[^/:.]:" . ange-ftp-hook-function)) file-name-handler-alist)))

(or (assoc "^/[^/:]*\\'" file-name-handler-alist) (setq file-name-handler-alist (cons (quote ("^/[^/:]*\\'" . ange-ftp-completion-hook-function)) file-name-handler-alist)))

;;;***

;;;### (autoloads (appt-make-list) "appt" "appt.el" (12778 43089))
;;; Generated autoloads from appt.el

(defvar appt-issue-message t "\
*Non-nil means check for appointments in the diary buffer.
To be detected, the diary entry must have the time
as the first thing on a line.")

(defvar appt-message-warning-time 12 "\
*Time in minutes before an appointment that the warning begins.")

(defvar appt-audible t "\
*Non-nil means beep to indicate appointment.")

(defvar appt-visible t "\
*Non-nil means display appointment message in echo area.")

(defvar appt-display-mode-line t "\
*Non-nil means display minutes to appointment and time on the mode line.")

(defvar appt-msg-window t "\
*Non-nil means display appointment message in another window.")

(defvar appt-display-duration 10 "\
*The number of seconds an appointment message is displayed.")

(defvar appt-display-diary t "\
*Non-nil means to display the next days diary on the screen. 
This will occur at midnight when the appointment list is updated.")

(autoload (quote appt-make-list) "appt" nil nil nil)

;;;***

;;;### (autoloads (apropos-documentation apropos-value apropos apropos-command) "apropos" "apropos.el" (12682 43347))
;;; Generated autoloads from apropos.el

(fset (quote command-apropos) (quote apropos-command))

(autoload (quote apropos-command) "apropos" "\
Shows commands (interactively callable functions) that match REGEXP.
With optional prefix ARG or if `apropos-do-all' is non-nil, also show
variables." t nil)

(autoload (quote apropos) "apropos" "\
Show all bound symbols whose names match REGEXP.
With optional prefix ARG or if `apropos-do-all' is non-nil, also show unbound
symbols and key bindings, which is a little more time-consuming.
Returns list of symbols and documentation found." t nil)

(autoload (quote apropos-value) "apropos" "\
Show all symbols whose value's printed image matches REGEXP.
With optional prefix ARG or if `apropos-do-all' is non-nil, also looks
at the function and at the names and values of properties.
Returns list of symbols and values found." t nil)

(autoload (quote apropos-documentation) "apropos" "\
Show symbols whose documentation contain matches for REGEXP.
With optional prefix ARG or if `apropos-do-all' is non-nil, also use
documentation that is not stored in the documentation file and show key
bindings.
Returns list of symbols and documentation found." t nil)

;;;***

;;;### (autoloads (arabic-mode) "arabic" "arabic.el" (12271 28689))
;;; Generated autoloads from arabic.el

(defvar arabic-mode nil "\
Non-nil if in arabic-mode.")

(autoload (quote arabic-mode) "arabic" "\
Toggle arabic-mode.  With ARG, turn arabic-mode on iff ARG is positive." t nil)

;;;***

;;;### (autoloads (archive-mode) "arc-mode" "arc-mode.el" (12545 51467))
;;; Generated autoloads from arc-mode.el

(autoload (quote archive-mode) "arc-mode" "\
Major mode for viewing an archive file in a dired-like way.
You can move around using the usual cursor motion commands.
Letters no longer insert themselves.
Type `e' to pull a file out of the archive and into its own buffer;
or click mouse-2 on the file's line in the archive mode buffer.

If you edit a sub-file of this archive (as with the `e' command) and
save it, the contents of that buffer will be saved back into the
archive.

\\{archive-mode-map}" nil nil)

;;;***

;;;### (autoloads (asm-mode) "asm-mode" "asm-mode.el" (12747 22249))
;;; Generated autoloads from asm-mode.el

(autoload (quote asm-mode) "asm-mode" "\
Major mode for editing typical assembler code.
Features a private abbrev table and the following bindings:

\\[asm-colon]	outdent a preceding label, tab to next tab stop.
\\[tab-to-tab-stop]	tab to next tab stop.
\\[asm-newline]	newline, then tab to next tab stop.
\\[asm-comment]	smart placement of assembler comments.

The character used for making comments is set by the variable
`asm-comment-char' (which defaults to `?;').

Alternatively, you may set this variable in `asm-mode-set-comment-hook',
which is called near the beginning of mode initialization.

Turning on Asm mode runs the hook `asm-mode-hook' at the end of initialization.

Special commands:
\\{asm-mode-map}
" t nil)

;;;***

;;;### (autoloads (auto-show-mode) "auto-show" "auto-show.el" (12441 50134))
;;; Generated autoloads from auto-show.el

(autoload (quote auto-show-mode) "auto-show" "\
Turn automatic horizontal scroll mode on or off.
With arg, turn auto scrolling on if arg is positive, off otherwise." t nil)

;;;***

;;;### (autoloads (define-auto-insert auto-insert) "autoinsert" "autoinsert.el" (12545 51472))
;;; Generated autoloads from autoinsert.el

(autoload (quote auto-insert) "autoinsert" "\
Insert default contents into a new file if `auto-insert' is non-nil.
Matches the visited file name against the elements of `auto-insert-alist'." t nil)

(autoload (quote define-auto-insert) "autoinsert" "\
Associate CONDITION with (additional) ACTION in `auto-insert-alist'.
Optional AFTER means to insert action after all existing actions for CONDITION,
or if CONDITION had no actions, after all other CONDITIONs." nil nil)

;;;***

;;;### (autoloads (batch-update-autoloads update-autoloads-from-directory update-file-autoloads) "autoload" "autoload.el" (12576 5123))
;;; Generated autoloads from autoload.el

(autoload (quote update-file-autoloads) "autoload" "\
Update the autoloads for FILE in `generated-autoload-file'
\(which FILE might bind in its local variables)." t nil)

(autoload (quote update-autoloads-from-directory) "autoload" "\
Update loaddefs.el with all the current autoloads from DIR, and no old ones.
This uses `update-file-autoloads' (which see) do its work." t nil)

(autoload (quote batch-update-autoloads) "autoload" "\
Update loaddefs.el autoloads in batch mode.
Calls `update-autoloads-from-directory' on each command line argument." nil nil)

;;;***

;;;### (autoloads (mouse-avoidance-mode) "avoid" "avoid.el" (12633 49973))
;;; Generated autoloads from avoid.el

(autoload (quote mouse-avoidance-mode) "avoid" "\
Set cursor avoidance mode to MODE.
MODE should be one of the symbols `banish', `exile', `jump', `animate',
`cat-and-mouse', `proteus', or `none'.

If MODE is nil, toggle mouse avoidance between `none` and `banish'
modes.  Positive numbers and symbols other than the above are treated
as equivalent to `banish'; negative numbers and `-' are equivalent to `none'.

Effects of the different modes: 
 * banish: Move the mouse to the upper-right corner on any keypress.
 * exile: Move the mouse to the corner only if the cursor gets too close,
     and allow it to return once the cursor is out of the way.
 * jump: If the cursor gets too close to the mouse, displace the mouse
     a random distance & direction.
 * animate: As `jump', but shows steps along the way for illusion of motion.
 * cat-and-mouse: Same as `animate'.
 * proteus: As `animate', but changes the shape of the mouse pointer too.

Whenever the mouse is moved, the frame is also raised.

\(see `mouse-avoidance-threshold' for definition of \"too close\",
and `mouse-avoidance-nudge-dist' and `mouse-avoidance-nudge-var' for
definition of \"random distance\".)" t nil)

;;;***

;;;### (autoloads (awk-mode) "awk-mode" "awk-mode.el" (12545 51476))
;;; Generated autoloads from awk-mode.el

(autoload (quote awk-mode) "awk-mode" "\
Major mode for editing AWK code.
This is much like C mode except for the syntax of comments.  It uses
the same keymap as C mode and has the same variables for customizing
indentation.  It has its own abbrev table and its own syntax table.

Turning on AWK mode calls the value of the variable `awk-mode-hook'
with no args, if that value is non-nil." t nil)

;;;***

;;;### (autoloads (backquote) "backquote" "backquote.el" (12704 56580))
;;; Generated autoloads from backquote.el

(autoload (quote backquote) "backquote" "\
Argument STRUCTURE describes a template to build.

The whole structure acts as if it were quoted except for certain
places where expressions are evaluated and inserted or spliced in.

For example:

b              => (ba bb bc)		; assume b has this value
`(a b c)       => (a b c)		; backquote acts like quote
`(a ,b c)      => (a (ba bb bc) c)	; insert the value of b
`(a ,@b c)     => (a ba bb bc c)	; splice in the value of b

Vectors work just like lists.  Nested backquotes are permitted." nil (quote macro))

(defalias (quote \`) (symbol-function (quote backquote)))

;;;***

;;;### (autoloads (bibtex-mode) "bibtex" "bibtex.el" (12811 48222))
;;; Generated autoloads from bibtex.el

(autoload (quote bibtex-mode) "bibtex" "\
Major mode for editing BibTeX files.
To submit a problem report, enter `\\[bibtex-submit-bug-report]' from a
bibtex-mode buffer.  This automatically sets up a mail buffer with
version information already added.  You just need to add a description
of the problem, including a reproducable test case and send the
message.

\\{bibtex-mode-map}

A command such as \\[bibtex-Book] will outline the fields for a BibTeX book entry.

The optional fields start with the string OPT, and thus ignored by BibTeX.
The OPT string may be removed from a field with \\[bibtex-remove-OPT].
\\[bibtex-kill-optional-field] kills the current optional field entirely.
\\[bibtex-remove-double-quotes-or-braces] removes the double-quotes or
braces around the text of the current field.  \\[bibtex-empty-field]
replaces the text of the current field with the default \"\" or {}.

The command \\[bibtex-clean-entry] cleans the current entry, i.e. (i) removes
double-quotes or braces from entirely numerical fields, (ii) removes
OPT from all non-empty optional fields, (iii) removes all empty
optional fields, and (iv) checks that no non-optional fields are empty.

Use \\[bibtex-find-text] to position the cursor at the end of the current field.
Use \\[bibtex-next-field] to move to end of the next field.

The following may be of interest as well:

  Functions:
    bibtex-entry
    bibtex-print-help-message
    bibtex-beginning-of-entry
    bibtex-end-of-entry
    bibtex-ispell-abstract
    bibtex-narrow-to-entry
    bibtex-hide-entry-bodies
    bibtex-sort-entries
    bibtex-validate-buffer
    bibtex-pop-previous
    bibtex-pop-next
    bibtex-complete-string

  Variables:
    bibtex-field-left-delimiter
    bibtex-field-right-delimiter
    bibtex-include-OPTcrossref
    bibtex-include-OPTkey
    bibtex-include-OPTannote
    bibtex-mode-user-optional-fields
    bibtex-clean-entry-zap-empty-opts
    bibtex-sort-ignore-string-entries
    bibtex-maintain-sorted-entries
    bibtex-entry-field-alist
    bibtex-predefined-strings
    bibtex-string-files

---------------------------------------------------------
Entry to this mode calls the value of bibtex-mode-hook if that value is
non-nil." t nil)

;;;***

;;;### (autoloads (blackbox) "blackbox" "blackbox.el" (12545 51481))
;;; Generated autoloads from blackbox.el

(autoload (quote blackbox) "blackbox" "\
Play blackbox.  Optional prefix argument is the number of balls;
the default is 4.

What is blackbox?

Blackbox is a game of hide and seek played on an 8 by 8 grid (the
Blackbox).  Your opponent (Emacs, in this case) has hidden several
balls (usually 4) within this box.  By shooting rays into the box and
observing where they emerge it is possible to deduce the positions of
the hidden balls.  The fewer rays you use to find the balls, the lower
your score.

Overview of play:

\\<blackbox-mode-map>To play blackbox, type \\[blackbox].  An optional prefix argument
specifies the number of balls to be hidden in the box; the default is
four.

The cursor can be moved around the box with the standard cursor
movement keys.

To shoot a ray, move the cursor to the edge of the box and press SPC.
The result will be determined and the playfield updated.

You may place or remove balls in the box by moving the cursor into the
box and pressing \\[bb-romp].

When you think the configuration of balls you have placed is correct,
press \\[bb-done].  You will be informed whether you are correct or
not, and be given your score.  Your score is the number of letters and
numbers around the outside of the box plus five for each incorrectly
placed ball.  If you placed any balls incorrectly, they will be
indicated with `x', and their actual positions indicated with `o'.

Details:

There are three possible outcomes for each ray you send into the box:

	Detour: the ray is deflected and emerges somewhere other than
		where you sent it in.  On the playfield, detours are
		denoted by matching pairs of numbers -- one where the
		ray went in, and the other where it came out.

	Reflection: the ray is reflected and emerges in the same place
		it was sent in.  On the playfield, reflections are
		denoted by the letter `R'.

	Hit:	the ray strikes a ball directly and is absorbed.  It does
		not emerge from the box.  On the playfield, hits are
		denoted by the letter `H'.

The rules for how balls deflect rays are simple and are best shown by
example.

As a ray approaches a ball it is deflected ninety degrees.  Rays can
be deflected multiple times.  In the diagrams below, the dashes
represent empty box locations and the letter `O' represents a ball.
The entrance and exit points of each ray are marked with numbers as
described under \"Detour\" above.  Note that the entrance and exit
points are always interchangeable.  `*' denotes the path taken by the
ray.

Note carefully the relative positions of the ball and the ninety
degree deflection it causes.

    1                                            
  - * - - - - - -         - - - - - - - -         - - - - - - - -       
  - * - - - - - -         - - - - - - - -         - - - - - - - -       
1 * * - - - - - -         - - - - - - - -         - O - - - - O -       
  - - O - - - - -         - - O - - - - -         - - * * * * - -
  - - - - - - - -         - - - * * * * * 2     3 * * * - - * - -
  - - - - - - - -         - - - * - - - -         - - - O - * - -      
  - - - - - - - -         - - - * - - - -         - - - - * * - -       
  - - - - - - - -         - - - * - - - -         - - - - * - O -       
                                2                         3

As mentioned above, a reflection occurs when a ray emerges from the same point
it was sent in.  This can happen in several ways:

                                                                           
  - - - - - - - -         - - - - - - - -          - - - - - - - -
  - - - - O - - -         - - O - O - - -          - - - - - - - -
R * * * * - - - -         - - - * - - - -          O - - - - - - -
  - - - - O - - -         - - - * - - - -        R - - - - - - - -
  - - - - - - - -         - - - * - - - -          - - - - - - - -
  - - - - - - - -         - - - * - - - -          - - - - - - - -
  - - - - - - - -       R * * * * - - - -          - - - - - - - -
  - - - - - - - -         - - - - O - - -          - - - - - - - -

In the first example, the ray is deflected downwards by the upper
ball, then left by the lower ball, and finally retraces its path to
its point of origin.  The second example is similar.  The third
example is a bit anomalous but can be rationalized by realizing the
ray never gets a chance to get into the box.  Alternatively, the ray
can be thought of as being deflected downwards and immediately
emerging from the box.

A hit occurs when a ray runs straight into a ball:

  - - - - - - - -         - - - - - - - -          - - - - - - - -
  - - - - - - - -         - - - - - - - -          - - - - O - - -
  - - - - - - - -         - - - - O - - -        H * * * * - - - -
  - - - - - - - -       H * * * * O - - -          - - - * - - - -
  - - - - - - - -         - - - - O - - -          - - - O - - - -
H * * * O - - - -         - - - - - - - -          - - - - - - - -
  - - - - - - - -         - - - - - - - -          - - - - - - - -
  - - - - - - - -         - - - - - - - -          - - - - - - - -

Be sure to compare the second example of a hit with the first example of
a reflection." t nil)

;;;***

;;;### (autoloads (bookmark-menu-delete bookmark-menu-rename bookmark-menu-locate bookmark-menu-jump bookmark-menu-insert bookmark-bmenu-list bookmark-load bookmark-save bookmark-write bookmark-delete bookmark-insert bookmark-rename bookmark-insert-location bookmark-relocate bookmark-jump bookmark-set) "bookmark" "bookmark.el" (12689 4676))
;;; Generated autoloads from bookmark.el

(if (symbolp (key-binding "r")) nil (progn (define-key ctl-x-map "rb" (quote bookmark-jump)) (define-key ctl-x-map "rm" (quote bookmark-set)) (define-key ctl-x-map "rl" (quote bookmark-bmenu-list))))

(defvar bookmark-map nil "\
Keymap containing bindings to bookmark functions.
It is not bound to any key by default: to bind it
so that you have a bookmark prefix, just use `global-set-key' and bind a
key of your choice to `bookmark-map'.  All interactive bookmark
functions have a binding in this keymap.")

(define-prefix-command (quote bookmark-map))

(define-key bookmark-map "x" (quote bookmark-set))

(define-key bookmark-map "m" (quote bookmark-set))

(define-key bookmark-map "j" (quote bookmark-jump))

(define-key bookmark-map "g" (quote bookmark-jump))

(define-key bookmark-map "i" (quote bookmark-insert))

(define-key bookmark-map "e" (quote edit-bookmarks))

(define-key bookmark-map "f" (quote bookmark-insert-location))

(define-key bookmark-map "r" (quote bookmark-rename))

(define-key bookmark-map "d" (quote bookmark-delete))

(define-key bookmark-map "l" (quote bookmark-load))

(define-key bookmark-map "w" (quote bookmark-write))

(define-key bookmark-map "s" (quote bookmark-save))

(add-hook (quote kill-emacs-hook) (function (lambda nil (and (featurep (quote bookmark)) bookmark-alist (bookmark-time-to-save-p t) (bookmark-save)))))

(autoload (quote bookmark-set) "bookmark" "\
Set a bookmark named NAME inside a file.
If name is nil, then the user will be prompted.
With prefix arg, will not overwrite a bookmark that has the same name
as NAME if such a bookmark already exists, but instead will \"push\"
the new bookmark onto the bookmark alist.  Thus the most recently set
bookmark with name NAME would be the one in effect at any given time,
but the others are still there, should you decide to delete the most
recent one.

To yank words from the text of the buffer and use them as part of the
bookmark name, type C-w while setting a bookmark.  Successive C-w's
yank successive words.

Typing C-u inserts the name of the last bookmark used in the buffer
\(as an aid in using a single bookmark name to track your progress
through a large file).  If no bookmark was used, then C-u inserts the
name of the file being visited.

Use \\[bookmark-delete] to remove bookmarks (you give it a name,
and it removes only the first instance of a bookmark with that name from
the list of bookmarks.)" t nil)

(autoload (quote bookmark-jump) "bookmark" "\
Jump to bookmark BOOKMARK (a point in some file).  
You may have a problem using this function if the value of variable
`bookmark-alist' is nil.  If that happens, you need to load in some
bookmarks.  See help on function `bookmark-load' for more about
this.

If the file pointed to by BOOKMARK no longer exists, you will be asked
if you wish to give the bookmark a new location, and bookmark-jump
will then jump to the new location, as well as recording it in place
of the old one in the permanent bookmark record." t nil)

(autoload (quote bookmark-relocate) "bookmark" "\
Relocate BOOKMARK to another file (reading file name with minibuffer).
This makes an already existing bookmark point to that file, instead of
the one it used to point at.  Useful when a file has been renamed
after a bookmark was set in it." t nil)

(autoload (quote bookmark-insert-location) "bookmark" "\
Insert the name of the file associated with BOOKMARK.
Optional second arg NO-HISTORY means don't record this in the
minibuffer history list `bookmark-history'." t nil)

(defalias (quote bookmark-locate) (quote bookmark-insert-location))

(autoload (quote bookmark-rename) "bookmark" "\
Change the name of OLD bookmark to NEW name.
If called from keyboard, prompt for OLD and NEW.  If called from
menubar, select OLD from a menu and prompt for NEW.

If called from Lisp, prompt for NEW if only OLD was passed as an
argument.  If called with two strings, then no prompting is done.  You
must pass at least OLD when calling from Lisp.

While you are entering the new name, consecutive C-w's insert
consecutive words from the text of the buffer into the new bookmark
name." t nil)

(autoload (quote bookmark-insert) "bookmark" "\
Insert the text of the file pointed to by bookmark BOOKMARK.  
You may have a problem using this function if the value of variable
`bookmark-alist' is nil.  If that happens, you need to load in some
bookmarks.  See help on function `bookmark-load' for more about
this." t nil)

(autoload (quote bookmark-delete) "bookmark" "\
Delete BOOKMARK from the bookmark list.  
Removes only the first instance of a bookmark with that name.  If
there are one or more other bookmarks with the same name, they will
not be deleted.  Defaults to the \"current\" bookmark (that is, the
one most recently used in this file, if any).
Optional second arg BATCH means don't update the bookmark list buffer,
probably because we were called from there." t nil)

(autoload (quote bookmark-write) "bookmark" "\
Write bookmarks to a file (reading the file name with the minibuffer).
Don't use this in Lisp programs; use `bookmark-save' instead." t nil)

(autoload (quote bookmark-save) "bookmark" "\
Save currently defined bookmarks.
Saves by default in the file defined by the variable
`bookmark-default-file'.  With a prefix arg, save it in file FILE
\(second argument).

If you are calling this from Lisp, the two arguments are PREFIX-ARG
and FILE, and if you just want it to write to the default file, then
pass no arguments.  Or pass in nil and FILE, and it will save in FILE
instead.  If you pass in one argument, and it is non-nil, then the
user will be interactively queried for a file to save in.

When you want to load in the bookmarks from a file, use
`bookmark-load', \\[bookmark-load].  That function will prompt you
for a file, defaulting to the file defined by variable
`bookmark-default-file'." t nil)

(autoload (quote bookmark-load) "bookmark" "\
Load bookmarks from FILE (which must be in bookmark format).
Appends loaded bookmarks to the front of the list of bookmarks.  If
optional second argument REVERT is non-nil, existing bookmarks are
destroyed.  Optional third arg NO-MSG means don't display any messages
while loading.

If you load a file that doesn't contain a proper bookmark alist, you
will corrupt Emacs's bookmark list.  Generally, you should only load
in files that were created with the bookmark functions in the first
place.  Your own personal bookmark file, `~/.emacs.bmk', is
maintained automatically by Emacs; you shouldn't need to load it
explicitly." t nil)

(autoload (quote bookmark-bmenu-list) "bookmark" "\
Display a list of existing bookmarks.
The list is displayed in a buffer named `*Bookmark List*'.
The leftmost column displays a D if the bookmark is flagged for
deletion, or > if it is flagged for displaying." t nil)

(defalias (quote list-bookmarks) (quote bookmark-bmenu-list))

(defalias (quote edit-bookmarks) (quote bookmark-bmenu-list))

(autoload (quote bookmark-menu-insert) "bookmark" "\
Insert the text of the file pointed to by bookmark BOOKMARK.  
You may have a problem using this function if the value of variable
`bookmark-alist' is nil.  If that happens, you need to load in some
bookmarks.  See help on function `bookmark-load' for more about
this.

Warning: this function only takes an EVENT as argument.  Use the
corresponding bookmark function from Lisp (the one without the
\"-menu-\" in its name)." t nil)

(autoload (quote bookmark-menu-jump) "bookmark" "\
Jump to bookmark BOOKMARK (a point in some file).  
You may have a problem using this function if the value of variable
`bookmark-alist' is nil.  If that happens, you need to load in some
bookmarks.  See help on function `bookmark-load' for more about
this.

Warning: this function only takes an EVENT as argument.  Use the
corresponding bookmark function from Lisp (the one without the
\"-menu-\" in its name)." t nil)

(autoload (quote bookmark-menu-locate) "bookmark" "\
Insert the name of the file associated with BOOKMARK. 
\(This is not the same as the contents of that file).

Warning: this function only takes an EVENT as argument.  Use the
corresponding bookmark function from Lisp (the one without the
\"-menu-\" in its name)." t nil)

(autoload (quote bookmark-menu-rename) "bookmark" "\
Change the name of OLD-BOOKMARK to NEWNAME.  
If called from keyboard, prompts for OLD-BOOKMARK and NEWNAME.
If called from menubar, OLD-BOOKMARK is selected from a menu, and
prompts for NEWNAME. 
If called from Lisp, prompts for NEWNAME if only OLD-BOOKMARK was
passed as an argument.  If called with two strings, then no prompting
is done.  You must pass at least OLD-BOOKMARK when calling from Lisp.

While you are entering the new name, consecutive C-w's insert
consecutive words from the text of the buffer into the new bookmark
name.

Warning: this function only takes an EVENT as argument.  Use the
corresponding bookmark function from Lisp (the one without the
\"-menu-\" in its name)." t nil)

(autoload (quote bookmark-menu-delete) "bookmark" "\
Delete the bookmark named NAME from the bookmark list.  
Removes only the first instance of a bookmark with that name.  If
there are one or more other bookmarks with the same name, they will
not be deleted.  Defaults to the \"current\" bookmark (that is, the
one most recently used in this file, if any).

Warning: this function only takes an EVENT as argument.  Use the
corresponding bookmark function from Lisp (the one without the
\"-menu-\" in its name)." t nil)

(defvar menu-bar-bookmark-map (make-sparse-keymap "Bookmark functions"))

(defalias (quote menu-bar-bookmark-map) (symbol-value (quote menu-bar-bookmark-map)))

(define-key menu-bar-bookmark-map [load] (quote ("Load a Bookmark File..." . bookmark-load)))

(define-key menu-bar-bookmark-map [write] (quote ("Save Bookmarks As..." . bookmark-write)))

(define-key menu-bar-bookmark-map [save] (quote ("Save Bookmarks" . bookmark-save)))

(define-key menu-bar-bookmark-map [edit] (quote ("Edit Bookmark List" . bookmark-bmenu-list)))

(define-key menu-bar-bookmark-map [delete] (quote ("Delete Bookmark" . bookmark-menu-delete)))

(define-key menu-bar-bookmark-map [rename] (quote ("Rename Bookmark" . bookmark-menu-rename)))

(define-key menu-bar-bookmark-map [locate] (quote ("Insert Location" . bookmark-menu-locate)))

(define-key menu-bar-bookmark-map [insert] (quote ("Insert Contents" . bookmark-menu-insert)))

(define-key menu-bar-bookmark-map [set] (quote ("Set Bookmark" . bookmark-set)))

(define-key menu-bar-bookmark-map [jump] (quote ("Jump to Bookmark" . bookmark-menu-jump)))

;;;***

;;;### (autoloads (browse-url-of-dired-file browse-url-of-buffer browse-url-of-file browse-url-at-mouse browse-url-at-point) "browse-url" "browse-url.el" (12786 33098))
;;; Generated autoloads from browse-url.el

(autoload (quote browse-url-at-point) "browse-url" "\
Ask a WWW browser to load the URL at or before point.
The URL is loaded according to the value of `browse-url-browser-function'." t nil)

(autoload (quote browse-url-at-mouse) "browse-url" "\
Ask a WWW browser to load a URL clicked with the mouse.
The URL is the one around or before the position of the mouse click
but point is not changed.  The URL is loaded according to the value of
`browse-url-browser-function'." t nil)

(autoload (quote browse-url-of-file) "browse-url" "\
Ask a WWW browser to display FILE.
Display the current buffer's file if FILE is nil or if called
interactively.  Turn the filename into a URL by performing
replacements given in variable `browse-url-filename-alist'.  Pass the
URL to a browser using variable `browse-url-browser-function' then run
`browse-url-of-file-hook'." t nil)

(autoload (quote browse-url-of-buffer) "browse-url" "\
Ask a WWW browser to display BUFFER.
Display the current buffer if BUFFER is nil." t nil)

(autoload (quote browse-url-of-dired-file) "browse-url" "\
In Dired, ask a WWW browser to display the file named on this line." t nil)

;;;***

;;;### (autoloads (batch-byte-recompile-directory batch-byte-compile display-call-tree byte-compile compile-defun byte-compile-file byte-recompile-directory byte-force-recompile) "bytecomp" "bytecomp.el" (12728 26482))
;;; Generated autoloads from bytecomp.el

(autoload (quote byte-force-recompile) "bytecomp" "\
Recompile every `.el' file in DIRECTORY that already has a `.elc' file.
Files in subdirectories of DIRECTORY are processed also." t nil)

(autoload (quote byte-recompile-directory) "bytecomp" "\
Recompile every `.el' file in DIRECTORY that needs recompilation.
This is if a `.elc' file exists but is older than the `.el' file.
Files in subdirectories of DIRECTORY are processed also.

If the `.elc' file does not exist, normally the `.el' file is *not* compiled.
But a prefix argument (optional second arg) means ask user,
for each such `.el' file, whether to compile it.  Prefix argument 0 means
don't ask and compile the file anyway.

A nonzero prefix argument also means ask about each subdirectory.

If the third argument FORCE is non-nil,
recompile every `.el' file that already has a `.elc' file." t nil)

(autoload (quote byte-compile-file) "bytecomp" "\
Compile a file of Lisp code named FILENAME into a file of byte code.
The output file's name is made by appending `c' to the end of FILENAME.
With prefix arg (noninteractively: 2nd arg), load the file after compiling." t nil)

(autoload (quote compile-defun) "bytecomp" "\
Compile and evaluate the current top-level form.
Print the result in the minibuffer.
With argument, insert value in current buffer after the form." t nil)

(autoload (quote byte-compile) "bytecomp" "\
If FORM is a symbol, byte-compile its function definition.
If FORM is a lambda or a macro, byte-compile it as a function." nil nil)

(autoload (quote display-call-tree) "bytecomp" "\
Display a call graph of a specified file.
This lists which functions have been called, what functions called
them, and what functions they call.  The list includes all functions
whose definitions have been compiled in this Emacs session, as well as
all functions called by those functions.

The call graph does not include macros, inline functions, or
primitives that the byte-code interpreter knows about directly (eq,
cons, etc.).

The call tree also lists those functions which are not known to be called
\(that is, to which no calls have been compiled), and which cannot be
invoked interactively." t nil)

(autoload (quote batch-byte-compile) "bytecomp" "\
Run `byte-compile-file' on the files remaining on the command line.
Use this from the command line, with `-batch';
it won't work in an interactive Emacs.
Each file is processed even if an error occurred previously.
For example, invoke \"emacs -batch -f batch-byte-compile $emacs/ ~/*.el\"" nil nil)

(autoload (quote batch-byte-recompile-directory) "bytecomp" "\
Runs `byte-recompile-directory' on the dirs remaining on the command line.
Must be used only with `-batch', and kills Emacs on completion.
For example, invoke `emacs -batch -f batch-byte-recompile-directory .'." nil nil)

;;;***

;;;### (autoloads nil "cal-dst" "cal-dst.el" (12545 51496))
;;; Generated autoloads from cal-dst.el

(put (quote calendar-daylight-savings-starts) (quote risky-local-variable) t)

(put (quote calendar-daylight-savings-ends) (quote risky-local-variable) t)

;;;***

;;;### (autoloads (list-yahrzeit-dates) "cal-hebrew" "cal-hebrew.el" (12545 51498))
;;; Generated autoloads from cal-hebrew.el

(autoload (quote list-yahrzeit-dates) "cal-hebrew" "\
List Yahrzeit dates for *Gregorian* DEATH-DATE from START-YEAR to END-YEAR.
When called interactively from the calendar window, the date of death is taken
from the cursor position." t nil)

;;;***

;;;### (autoloads (calendar) "calendar" "calendar.el" (12722 29358))
;;; Generated autoloads from calendar.el

(defvar calendar-week-start-day 0 "\
*The day of the week on which a week in the calendar begins.
0 means Sunday (default), 1 means Monday, and so on.")

(defvar calendar-offset 0 "\
*The offset of the principal month from the center of the calendar window.
0 means the principal month is in the center (default), -1 means on the left,
+1 means on the right.  Larger (or smaller) values push the principal month off
the screen.")

(defvar view-diary-entries-initially nil "\
*Non-nil means display current date's diary entries on entry.
The diary is displayed in another window when the calendar is first displayed,
if the current date is visible.  The number of days of diary entries displayed
is governed by the variable `number-of-diary-entries'.")

(defvar number-of-diary-entries 1 "\
*Specifies how many days of diary entries are to be displayed initially.
This variable affects the diary display when the command M-x diary is used,
or if the value of the variable `view-diary-entries-initially' is t.  For
example, if the default value 1 is used, then only the current day's diary
entries will be displayed.  If the value 2 is used, then both the current
day's and the next day's entries will be displayed.

The value can also be a vector such as [0 2 2 2 2 4 1]; this value
says to display no diary entries on Sunday, the display the entries
for the current date and the day after on Monday through Thursday,
display Friday through Monday's entries on Friday, and display only
Saturday's entries on Saturday.

This variable does not affect the diary display with the `d' command
from the calendar; in that case, the prefix argument controls the
number of days of diary entries displayed.")

(defvar mark-diary-entries-in-calendar nil "\
*Non-nil means mark dates with diary entries, in the calendar window.
The marking symbol is specified by the variable `diary-entry-marker'.")

(defvar view-calendar-holidays-initially nil "\
*Non-nil means display holidays for current three month period on entry.
The holidays are displayed in another window when the calendar is first
displayed.")

(defvar mark-holidays-in-calendar nil "\
*Non-nil means mark dates of holidays in the calendar window.
The marking symbol is specified by the variable `calendar-holiday-marker'.")

(defvar all-hebrew-calendar-holidays nil "\
*If nil, show only major holidays from the Hebrew calendar.
This means only those Jewish holidays that appear on secular calendars.

If t, show all the holidays that would appear in a complete Hebrew calendar.")

(defvar all-christian-calendar-holidays nil "\
*If nil, show only major holidays from the Christian calendar.
This means only those Christian holidays that appear on secular calendars.

If t, show all the holidays that would appear in a complete Christian
calendar.")

(defvar all-islamic-calendar-holidays nil "\
*If nil, show only major holidays from the Islamic calendar.
This means only those Islamic holidays that appear on secular calendars.

If t, show all the holidays that would appear in a complete Islamic
calendar.")

(defvar calendar-load-hook nil "\
*List of functions to be called after the calendar is first loaded.
This is the place to add key bindings to `calendar-mode-map'.")

(defvar initial-calendar-window-hook nil "\
*List of functions to be called when the calendar window is first opened.
The functions invoked are called after the calendar window is opened, but
once opened is never called again.  Leaving the calendar with the `q' command
and reentering it will cause these functions to be called again.")

(defvar today-visible-calendar-hook nil "\
*List of functions called whenever the current date is visible.
This can be used, for example, to replace today's date with asterisks; a
function `calendar-star-date' is included for this purpose:
    (setq today-visible-calendar-hook 'calendar-star-date)
It can also be used to mark the current date with `calendar-today-marker';
a function is also provided for this:
    (setq today-visible-calendar-hook 'calendar-mark-today)

The corresponding variable `today-invisible-calendar-hook' is the list of
functions called when the calendar function was called when the current
date is not visible in the window.

Other than the use of the provided functions, the changing of any
characters in the calendar buffer by the hooks may cause the failure of the
functions that move by days and weeks.")

(defvar today-invisible-calendar-hook nil "\
*List of functions called whenever the current date is not visible.

The corresponding variable `today-visible-calendar-hook' is the list of
functions called when the calendar function was called when the current
date is visible in the window.

Other than the use of the provided functions, the changing of any
characters in the calendar buffer by the hooks may cause the failure of the
functions that move by days and weeks.")

(defvar diary-file "~/diary" "\
*Name of the file in which one's personal diary of dates is kept.

The file's entries are lines in any of the forms

            MONTH/DAY
            MONTH/DAY/YEAR
            MONTHNAME DAY
            MONTHNAME DAY, YEAR
            DAYNAME

at the beginning of the line; the remainder of the line is the diary entry
string for that date.  MONTH and DAY are one or two digit numbers, YEAR is
a number and may be written in full or abbreviated to the final two digits.
If the date does not contain a year, it is generic and applies to any year.
DAYNAME entries apply to any date on which is on that day of the week.
MONTHNAME and DAYNAME can be spelled in full, abbreviated to three
characters (with or without a period), capitalized or not.  Any of DAY,
MONTH, or MONTHNAME, YEAR can be `*' which matches any day, month, or year,
respectively.

The European style (in which the day precedes the month) can be used
instead, if you execute `european-calendar' when in the calendar, or set
`european-calendar-style' to t in your .emacs file.  The European forms are

            DAY/MONTH
            DAY/MONTH/YEAR
            DAY MONTHNAME
            DAY MONTHNAME YEAR
            DAYNAME

To revert to the default American style from the European style, execute
`american-calendar' in the calendar.

A diary entry can be preceded by the character
`diary-nonmarking-symbol' (ordinarily `&') to make that entry
nonmarking--that is, it will not be marked on dates in the calendar
window but will appear in a diary window.

Multiline diary entries are made by indenting lines after the first with
either a TAB or one or more spaces.

Lines not in one the above formats are ignored.  Here are some sample diary
entries (in the default American style):

     12/22/1988 Twentieth wedding anniversary!!
     &1/1. Happy New Year!
     10/22 Ruth's birthday.
     21: Payday
     Tuesday--weekly meeting with grad students at 10am
              Supowit, Shen, Bitner, and Kapoor to attend.
     1/13/89 Friday the thirteenth!!
     &thu 4pm squash game with Lloyd.
     mar 16 Dad's birthday
     April 15, 1989 Income tax due.
     &* 15 time cards due.

If the first line of a diary entry consists only of the date or day name with
no trailing blanks or punctuation, then that line is not displayed in the
diary window; only the continuation lines is shown.  For example, the
single diary entry

     02/11/1989
      Bill Blattner visits Princeton today
      2pm Cognitive Studies Committee meeting
      2:30-5:30 Lizzie at Lawrenceville for `Group Initiative'
      4:00pm Jamie Tappenden
      7:30pm Dinner at George and Ed's for Alan Ryan
      7:30-10:00pm dance at Stewart Country Day School

will appear in the diary window without the date line at the beginning.  This
facility allows the diary window to look neater, but can cause confusion if
used with more than one day's entries displayed.

Diary entries can be based on Lisp sexps.  For example, the diary entry

      %%(diary-block 11 1 1990 11 10 1990) Vacation

causes the diary entry \"Vacation\" to appear from November 1 through November
10, 1990.  Other functions available are `diary-float', `diary-anniversary',
`diary-cyclic', `diary-day-of-year', `diary-iso-date', `diary-french-date',
`diary-hebrew-date', `diary-islamic-date', `diary-mayan-date',
`diary-chinese-date', `diary-coptic-date', `diary-ethiopic-date',
`diary-persian-date', `diary-yahrzeit', `diary-sunrise-sunset',
`diary-phases-of-moon', `diary-parasha', `diary-omer', `diary-rosh-hodesh',
and `diary-sabbath-candles'.  See the documentation for the function
`list-sexp-diary-entries' for more details.

Diary entries based on the Hebrew and/or the Islamic calendar are also
possible, but because these are somewhat slow, they are ignored
unless you set the `nongregorian-diary-listing-hook' and the
`nongregorian-diary-marking-hook' appropriately.  See the documentation
for these functions for details.

Diary files can contain directives to include the contents of other files; for
details, see the documentation for the variable `list-diary-entries-hook'.")

(defvar diary-nonmarking-symbol "&" "\
*Symbol indicating that a diary entry is not to be marked in the calendar.")

(defvar hebrew-diary-entry-symbol "H" "\
*Symbol indicating a diary entry according to the Hebrew calendar.")

(defvar islamic-diary-entry-symbol "I" "\
*Symbol indicating a diary entry according to the Islamic calendar.")

(defvar diary-include-string "#include" "\
*The string indicating inclusion of another file of diary entries.
See the documentation for the function `include-other-diary-files'.")

(defvar sexp-diary-entry-symbol "%%" "\
*The string used to indicate a sexp diary entry in diary-file.
See the documentation for the function `list-sexp-diary-entries'.")

(defvar abbreviated-calendar-year t "\
*Interpret a two-digit year DD in a diary entry as either 19DD or 20DD.
For the Gregorian calendar; similarly for the Hebrew and Islamic calendars.
If this variable is nil, years must be written in full.")

(defvar european-calendar-style nil "\
*Use the European style of dates in the diary and in any displays.
If this variable is t, a date 1/2/1990 would be interpreted as February 1,
1990.  The accepted European date styles are

            DAY/MONTH
            DAY/MONTH/YEAR
            DAY MONTHNAME
            DAY MONTHNAME YEAR
            DAYNAME

Names can be capitalized or not, written in full, or abbreviated to three
characters with or without a period.")

(defvar american-date-diary-pattern (quote ((month "/" day "[^/0-9]") (month "/" day "/" year "[^0-9]") (monthname " *" day "[^,0-9]") (monthname " *" day ", *" year "[^0-9]") (dayname "\\W"))) "\
*List of pseudo-patterns describing the American patterns of date used.
See the documentation of `diary-date-forms' for an explanation.")

(defvar european-date-diary-pattern (quote ((day "/" month "[^/0-9]") (day "/" month "/" year "[^0-9]") (backup day " *" monthname "\\W+\\<[^*0-9]") (day " *" monthname " *" year "[^0-9]") (dayname "\\W"))) "\
*List of pseudo-patterns describing the European patterns of date used.
See the documentation of `diary-date-forms' for an explanation.")

(defvar european-calendar-display-form (quote ((if dayname (concat dayname ", ")) day " " monthname " " year)) "\
*Pseudo-pattern governing the way a date appears in the European style.
See the documentation of calendar-date-display-form for an explanation.")

(defvar american-calendar-display-form (quote ((if dayname (concat dayname ", ")) monthname " " day ", " year)) "\
*Pseudo-pattern governing the way a date appears in the American style.
See the documentation of `calendar-date-display-form' for an explanation.")

(defvar print-diary-entries-hook (quote lpr-buffer) "\
*List of functions called after a temporary diary buffer is prepared.
The buffer shows only the diary entries currently visible in the diary
buffer.  The default just does the printing.  Other uses might include, for
example, rearranging the lines into order by day and time, saving the buffer
instead of deleting it, or changing the function used to do the printing.")

(defvar list-diary-entries-hook nil "\
*List of functions called after diary file is culled for relevant entries.
It is to be used for diary entries that are not found in the diary file.

A function `include-other-diary-files' is provided for use as the value of
this hook.  This function enables you to use shared diary files together
with your own.  The files included are specified in the diary file by lines
of the form

        #include \"filename\"

This is recursive; that is, #include directives in files thus included are
obeyed.  You can change the \"#include\" to some other string by changing
the variable `diary-include-string'.  When you use `include-other-diary-files'
as part of the list-diary-entries-hook, you will probably also want to use the
function `mark-included-diary-files' as part of `mark-diary-entries-hook'.

For example, you could use

     (setq list-diary-entries-hook
       '(include-other-diary-files sort-diary-entries))
     (setq diary-display-hook 'fancy-diary-display)

in your `.emacs' file to cause the fancy diary buffer to be displayed with
diary entries from various included files, each day's entries sorted into
lexicographic order.")

(defvar diary-hook nil "\
*List of functions called after the display of the diary.
Can be used for appointment notification.")

(defvar diary-display-hook nil "\
*List of functions that handle the display of the diary.
If nil (the default), `simple-diary-display' is used.  Use `ignore' for no
diary display.

Ordinarily, this just displays the diary buffer (with holidays indicated in
the mode line), if there are any relevant entries.  At the time these
functions are called, the variable `diary-entries-list' is a list, in order
by date, of all relevant diary entries in the form of ((MONTH DAY YEAR)
STRING), where string is the diary entry for the given date.  This can be
used, for example, a different buffer for display (perhaps combined with
holidays), or produce hard copy output.

A function `fancy-diary-display' is provided as an alternative
choice for this hook; this function prepares a special noneditable diary
buffer with the relevant diary entries that has neat day-by-day arrangement
with headings.  The fancy diary buffer will show the holidays unless the
variable `holidays-in-diary-buffer' is set to nil.  Ordinarily, the fancy
diary buffer will not show days for which there are no diary entries, even
if that day is a holiday; if you want such days to be shown in the fancy
diary buffer, set the variable `diary-list-include-blanks' to t.")

(defvar nongregorian-diary-listing-hook nil "\
*List of functions called for listing diary file and included files.
As the files are processed for diary entries, these functions are used to cull
relevant entries.  You can use either or both of `list-hebrew-diary-entries'
and `list-islamic-diary-entries'.  The documentation for these functions
describes the style of such diary entries.")

(defvar mark-diary-entries-hook nil "\
*List of functions called after marking diary entries in the calendar.

A function `mark-included-diary-files' is also provided for use as the
mark-diary-entries-hook; it enables you to use shared diary files together
with your own.  The files included are specified in the diary file by lines
of the form
        #include \"filename\"
This is recursive; that is, #include directives in files thus included are
obeyed.  You can change the \"#include\" to some other string by changing the
variable `diary-include-string'.  When you use `mark-included-diary-files' as
part of the mark-diary-entries-hook, you will probably also want to use the
function `include-other-diary-files' as part of `list-diary-entries-hook'.")

(defvar nongregorian-diary-marking-hook nil "\
*List of functions called for marking diary file and included files.
As the files are processed for diary entries, these functions are used to cull
relevant entries.  You can use either or both of `mark-hebrew-diary-entries'
and `mark-islamic-diary-entries'.  The documentation for these functions
describes the style of such diary entries.")

(defvar diary-list-include-blanks nil "\
*If nil, do not include days with no diary entry in the list of diary entries.
Such days will then not be shown in the the fancy diary buffer, even if they
are holidays.")

(defvar holidays-in-diary-buffer t "\
*Non-nil means include holidays in the diary display.
The holidays appear in the mode line of the diary buffer, or in the
fancy diary buffer next to the date.  This slows down the diary functions
somewhat; setting it to nil makes the diary display faster.")

(put (quote general-holidays) (quote risky-local-variable) t)

(defvar general-holidays (quote ((holiday-fixed 1 1 "New Year's Day") (holiday-float 1 1 3 "Martin Luther King Day") (holiday-fixed 2 2 "Ground Hog Day") (holiday-fixed 2 14 "Valentine's Day") (holiday-float 2 1 3 "President's Day") (holiday-fixed 3 17 "St. Patrick's Day") (holiday-fixed 4 1 "April Fools' Day") (holiday-float 5 0 2 "Mother's Day") (holiday-float 5 1 -1 "Memorial Day") (holiday-fixed 6 14 "Flag Day") (holiday-float 6 0 3 "Father's Day") (holiday-fixed 7 4 "Independence Day") (holiday-float 9 1 1 "Labor Day") (holiday-float 10 1 2 "Columbus Day") (holiday-fixed 10 31 "Halloween") (holiday-fixed 11 11 "Veteran's Day") (holiday-float 11 4 4 "Thanksgiving"))) "\
*General holidays.  Default value is for the United States.
See the documentation for `calendar-holidays' for details.")

(put (quote oriental-holidays) (quote risky-local-variable) t)

(defvar oriental-holidays (quote ((if (fboundp (quote atan)) (holiday-chinese-new-year)))) "\
*Oriental holidays.
See the documentation for `calendar-holidays' for details.")

(put (quote local-holidays) (quote risky-local-variable) t)

(defvar local-holidays nil "\
*Local holidays.
See the documentation for `calendar-holidays' for details.")

(put (quote other-holidays) (quote risky-local-variable) t)

(defvar other-holidays nil "\
*User defined holidays.
See the documentation for `calendar-holidays' for details.")

(put (quote hebrew-holidays-1) (quote risky-local-variable) t)

(defvar hebrew-holidays-1 (quote ((holiday-rosh-hashanah-etc) (if all-hebrew-calendar-holidays (holiday-julian 11 (let* ((m displayed-month) (y displayed-year) (year)) (increment-calendar-month m y -1) (let ((year (extract-calendar-year (calendar-julian-from-absolute (calendar-absolute-from-gregorian (list m 1 y)))))) (if (zerop (% (1+ year) 4)) 22 21))) "\"Tal Umatar\" (evening)")))))

(put (quote hebrew-holidays-2) (quote risky-local-variable) t)

(defvar hebrew-holidays-2 (quote ((if all-hebrew-calendar-holidays (holiday-hanukkah) (holiday-hebrew 9 25 "Hanukkah")) (if all-hebrew-calendar-holidays (holiday-hebrew 10 (let ((h-year (extract-calendar-year (calendar-hebrew-from-absolute (calendar-absolute-from-gregorian (list displayed-month 28 displayed-year)))))) (if (= (% (calendar-absolute-from-hebrew (list 10 10 h-year)) 7) 6) 11 10)) "Tzom Teveth")) (if all-hebrew-calendar-holidays (holiday-hebrew 11 15 "Tu B'Shevat")))))

(put (quote hebrew-holidays-3) (quote risky-local-variable) t)

(defvar hebrew-holidays-3 (quote ((if all-hebrew-calendar-holidays (holiday-hebrew 11 (let ((m displayed-month) (y displayed-year)) (increment-calendar-month m y 1) (let* ((h-year (extract-calendar-year (calendar-hebrew-from-absolute (calendar-absolute-from-gregorian (list m (calendar-last-day-of-month m y) y))))) (s-s (calendar-hebrew-from-absolute (if (= (% (calendar-absolute-from-hebrew (list 7 1 h-year)) 7) 6) (calendar-dayname-on-or-before 6 (calendar-absolute-from-hebrew (list 11 17 h-year))) (calendar-dayname-on-or-before 6 (calendar-absolute-from-hebrew (list 11 16 h-year)))))) (day (extract-calendar-day s-s))) day)) "Shabbat Shirah")))))

(put (quote hebrew-holidays-4) (quote risky-local-variable) t)

(defvar hebrew-holidays-4 (quote ((holiday-passover-etc) (if (and all-hebrew-calendar-holidays (let* ((m displayed-month) (y displayed-year) (year)) (increment-calendar-month m y -1) (let ((year (extract-calendar-year (calendar-julian-from-absolute (calendar-absolute-from-gregorian (list m 1 y)))))) (= 21 (% year 28))))) (holiday-julian 3 26 "Kiddush HaHamah")) (if all-hebrew-calendar-holidays (holiday-tisha-b-av-etc)))))

(put (quote hebrew-holidays) (quote risky-local-variable) t)

(defvar hebrew-holidays (append hebrew-holidays-1 hebrew-holidays-2 hebrew-holidays-3 hebrew-holidays-4) "\
*Jewish holidays.
See the documentation for `calendar-holidays' for details.")

(put (quote christian-holidays) (quote risky-local-variable) t)

(defvar christian-holidays (quote ((if all-christian-calendar-holidays (holiday-fixed 1 6 "Epiphany")) (holiday-easter-etc) (if all-christian-calendar-holidays (holiday-greek-orthodox-easter)) (if all-christian-calendar-holidays (holiday-fixed 8 15 "Assumption")) (if all-christian-calendar-holidays (holiday-advent)) (holiday-fixed 12 25 "Christmas") (if all-christian-calendar-holidays (holiday-julian 12 25 "Eastern Orthodox Christmas")))) "\
*Christian holidays.
See the documentation for `calendar-holidays' for details.")

(put (quote islamic-holidays) (quote risky-local-variable) t)

(defvar islamic-holidays (quote ((holiday-islamic 1 1 (format "Islamic New Year %d" (let ((m displayed-month) (y displayed-year)) (increment-calendar-month m y 1) (extract-calendar-year (calendar-islamic-from-absolute (calendar-absolute-from-gregorian (list m (calendar-last-day-of-month m y) y))))))) (if all-islamic-calendar-holidays (holiday-islamic 1 10 "Ashura")) (if all-islamic-calendar-holidays (holiday-islamic 3 12 "Mulad-al-Nabi")) (if all-islamic-calendar-holidays (holiday-islamic 7 26 "Shab-e-Mi'raj")) (if all-islamic-calendar-holidays (holiday-islamic 8 15 "Shab-e-Bara't")) (holiday-islamic 9 1 "Ramadan Begins") (if all-islamic-calendar-holidays (holiday-islamic 9 27 "Shab-e Qadr")) (if all-islamic-calendar-holidays (holiday-islamic 10 1 "Id-al-Fitr")) (if all-islamic-calendar-holidays (holiday-islamic 12 10 "Id-al-Adha")))) "\
*Islamic holidays.
See the documentation for `calendar-holidays' for details.")

(put (quote solar-holidays) (quote risky-local-variable) t)

(defvar solar-holidays (quote ((if (fboundp (quote atan)) (solar-equinoxes-solstices)) (if (progn (require (quote cal-dst)) t) (funcall (quote holiday-sexp) calendar-daylight-savings-starts (quote (format "Daylight Savings Time Begins %s" (if (fboundp (quote atan)) (solar-time-string (/ calendar-daylight-savings-starts-time (float 60)) calendar-standard-time-zone-name) ""))))) (funcall (quote holiday-sexp) calendar-daylight-savings-ends (quote (format "Daylight Savings Time Ends %s" (if (fboundp (quote atan)) (solar-time-string (/ calendar-daylight-savings-ends-time (float 60)) calendar-daylight-time-zone-name) "")))))) "\
*Sun-related holidays.
See the documentation for `calendar-holidays' for details.")

(put (quote calendar-holidays) (quote risky-local-variable) t)

(defvar calendar-setup nil "\
The frame set up of the calendar.
The choices are `one-frame' (calendar and diary together in one separate,
dedicated frame) or `two-frames' (calendar and diary in separate, dedicated
frames); with any other value the current frame is used.")

(autoload (quote calendar) "calendar" "\
Choose between the one frame, two frame, or basic calendar displays.
The original function `calendar' has been renamed `calendar-basic-setup'." t nil)

;;;***

;;;### (autoloads (set-case-syntax set-case-syntax-pair set-case-syntax-delims copy-case-table describe-buffer-case-table) "case-table" "case-table.el" (12545 51511))
;;; Generated autoloads from case-table.el

(autoload (quote describe-buffer-case-table) "case-table" "\
Describe the case table of the current buffer." t nil)

(autoload (quote copy-case-table) "case-table" nil nil nil)

(autoload (quote set-case-syntax-delims) "case-table" "\
Make characters L and R a matching pair of non-case-converting delimiters.
This sets the entries for L and R in TABLE, which is a string
that will be used as the downcase part of a case table.
It also modifies `standard-syntax-table' to
indicate left and right delimiters." nil nil)

(autoload (quote set-case-syntax-pair) "case-table" "\
Make characters UC and LC a pair of inter-case-converting letters.
This sets the entries for characters UC and LC in TABLE, which is a string
that will be used as the downcase part of a case table.
It also modifies `standard-syntax-table' to give them the syntax of
word constituents." nil nil)

(autoload (quote set-case-syntax) "case-table" "\
Make characters C case-invariant with syntax SYNTAX.
This sets the entries for character C in TABLE, which is a string
that will be used as the downcase part of a case table.
It also modifies `standard-syntax-table'.
SYNTAX should be \" \", \"w\", \".\" or \"_\"." nil nil)

;;;***

;;;### (autoloads (c-set-style java-mode objc-mode c++-mode c-mode) "cc-mode" "cc-mode.el" (12814 19012))
;;; Generated autoloads from cc-mode.el

(autoload (quote c-mode) "cc-mode" "\
Major mode for editing K&R and ANSI C code.
To submit a problem report, enter `\\[c-submit-bug-report]' from a
c-mode buffer.  This automatically sets up a mail buffer with version
information already added.  You just need to add a description of the
problem, including a reproducible test case and send the message.

To see what version of cc-mode you are running, enter `\\[c-version]'.

The hook variable `c-mode-hook' is run with no args, if that value is
bound and has a non-nil value.  Also the hook `c-mode-common-hook' is
run first.

Key bindings:
\\{c-mode-map}" t nil)

(autoload (quote c++-mode) "cc-mode" "\
Major mode for editing C++ code.
To submit a problem report, enter `\\[c-submit-bug-report]' from a
c++-mode buffer.  This automatically sets up a mail buffer with
version information already added.  You just need to add a description
of the problem, including a reproducible test case, and send the
message.

To see what version of cc-mode you are running, enter `\\[c-version]'.

The hook variable `c++-mode-hook' is run with no args, if that
variable is bound and has a non-nil value.  Also the hook
`c-mode-common-hook' is run first.

Key bindings:
\\{c++-mode-map}" t nil)

(autoload (quote objc-mode) "cc-mode" "\
Major mode for editing Objective C code.
To submit a problem report, enter `\\[c-submit-bug-report]' from an
objc-mode buffer.  This automatically sets up a mail buffer with
version information already added.  You just need to add a description
of the problem, including a reproducible test case, and send the
message.

To see what version of cc-mode you are running, enter `\\[c-version]'.

The hook variable `objc-mode-hook' is run with no args, if that value
is bound and has a non-nil value.  Also the hook `c-mode-common-hook'
is run first.

Key bindings:
\\{objc-mode-map}" t nil)

(autoload (quote java-mode) "cc-mode" "\
Major mode for editing Java code.
To submit a problem report, enter `\\[c-submit-bug-report]' from an
java-mode buffer.  This automatically sets up a mail buffer with
version information already added.  You just need to add a description
of the problem, including a reproducible test case and send the
message.

To see what version of cc-mode you are running, enter `\\[c-version]'.

The hook variable `java-mode-hook' is run with no args, if that value
is bound and has a non-nil value.  Also the common hook
`c-mode-common-hook' is run first.

Key bindings:
\\{java-mode-map}" t nil)

(autoload (quote c-set-style) "cc-mode" "\
Set cc-mode variables to use one of several different indentation styles.
STYLENAME is a string representing the desired style from the list of
styles described in the variable `c-style-alist'.  See that variable
for details of setting up styles." t nil)
 (fset 'set-c-style           'c-set-style)

;;;***

;;;### (autoloads (define-ccl-program ccl-dump ccl-compile ccl-program-p) "ccl" "ccl.el" (12271 28690))
;;; Generated autoloads from ccl.el

(autoload (quote ccl-program-p) "ccl" "\
T if OBJECT is a valid CCL compiled code." nil nil)

(autoload (quote ccl-compile) "ccl" "\
Return a comiled code of CCL-PROGRAM as a vector of integer (>= 0)." nil nil)

(autoload (quote ccl-dump) "ccl" "\
Disassemble compiled CCL-CODE." nil nil)

(autoload (quote define-ccl-program) "ccl" "\
Does (defconst NAME (ccl-compile (eval CCL-PROGRAM)) DOC).
Byte-compiler expand this macro while compiling." nil (quote macro))

;;;***

;;;### (autoloads (g2b b2g gb2hz-region gb2hz-buffer hz2gb-region hz2gb-buffer) "chinese" "chinese.el" (12271 28690))
;;; Generated autoloads from chinese.el

(autoload (quote hz2gb-buffer) "chinese" "\
Convert whole text in the current buffer
from HZ/ZW encoding to mule internal encoding." t nil)

(autoload (quote hz2gb-region) "chinese" "\
Convert text in the current region from HZ/ZW encoding to *internal*." t nil)

(autoload (quote gb2hz-buffer) "chinese" "\
Convert whole text in the current buffer
from mule internal encoding to HZ encoding." t nil)

(autoload (quote gb2hz-region) "chinese" "\
Convert text in the current region
from mule internal encoding to HZ encoding." t nil)

(autoload (quote b2g) "chinese" "\
Convert Big5 code B1 to Mule's internal character code.
You can supply B1 as integer (character) or string.
If optional arg B2 is non nil, B1 is regarded as the first byte,
  B2 as the second byte of Big5 code.
If optional arg TYPE is not supplied, the returned value is a vector,
 and the 1st, 2nd, and 3rd elements show Mule's internal code.
If TYPE is 'character, returns character code, else if TYPE is 'string,
 returns string." nil nil)

(autoload (quote g2b) "chinese" "\
Convert internal code C0 to Big5 code.
You can supply C0 as integer (character) or string.
If optional arg C1 and C2 are non nil, C0 is regarded as the leading char,
  C1 as the first byte, C2 as the second byte of internal code.
If optional arg TYPE is not supplied, the returned value is a vector,
 and the 1st and 2nd elements show Mule's internal code.
If TYPE is 'character, returns character code, else if TYPE is 'string,
 returns string." nil nil)

;;;***

;;;### (autoloads (command-history-mode list-command-history repeat-matching-complex-command) "chistory" "chistory.el" (12536 45574))
;;; Generated autoloads from chistory.el

(autoload (quote repeat-matching-complex-command) "chistory" "\
Edit and re-evaluate complex command with name matching PATTERN.
Matching occurrences are displayed, most recent first, until you select
a form for evaluation.  If PATTERN is empty (or nil), every form in the
command history is offered.  The form is placed in the minibuffer for
editing and the result is evaluated." t nil)

(autoload (quote list-command-history) "chistory" "\
List history of commands typed to minibuffer.
The number of commands listed is controlled by `list-command-history-max'.
Calls value of `list-command-history-filter' (if non-nil) on each history
element to judge if that element should be excluded from the list.

The buffer is left in Command History mode." t nil)

(autoload (quote command-history-mode) "chistory" "\
Major mode for examining commands from `command-history'.
The number of commands listed is controlled by `list-command-history-max'.
The command history is filtered by `list-command-history-filter' if non-nil.
Use \\<command-history-map>\\[command-history-repeat] to repeat the command on the current line.

Otherwise much like Emacs-Lisp Mode except that there is no self-insertion
and digits provide prefix arguments.  Tab does not indent.
\\{command-history-map}
Calls the value of `command-history-hook' if that is non-nil.
The Command History listing is recomputed each time this mode is invoked." t nil)

;;;***

;;;### (autoloads (common-lisp-indent-function) "cl-indent" "cl-indent.el" (12545 51520))
;;; Generated autoloads from cl-indent.el

(autoload (quote common-lisp-indent-function) "cl-indent" nil nil nil)

;;;***

;;;### (autoloads (run-scheme) "cmuscheme" "cmuscheme.el" (12545 51527))
;;; Generated autoloads from cmuscheme.el

(autoload (quote run-scheme) "cmuscheme" "\
Run an inferior Scheme process, input and output via buffer *scheme*.
If there is a process already running in `*scheme*', switch to that buffer.
With argument, allows you to edit the command line (default is value
of `scheme-program-name').  Runs the hooks `inferior-scheme-mode-hook'
\(after the `comint-mode-hook' is run).
\(Type \\[describe-mode] in the process buffer for a list of commands.)" t nil)
 (add-hook 'same-window-buffer-names "*scheme*")

;;;***

;;;### (autoloads (comint-run make-comint) "comint" "comint.el" (12801 12302))
;;; Generated autoloads from comint.el

(autoload (quote make-comint) "comint" "\
Make a comint process NAME in a buffer, running PROGRAM.
The name of the buffer is made by surrounding NAME with `*'s.
PROGRAM should be either a string denoting an executable program to create
via `start-process', or a cons pair of the form (HOST . SERVICE) denoting a TCP
connection to be opened via `open-network-stream'.  If there is already a
running process in that buffer, it is not restarted.  Optional third arg
STARTFILE is the name of a file to send the contents of to the process.

If PROGRAM is a string, any more args are arguments to PROGRAM." nil nil)

(autoload (quote comint-run) "comint" "\
Run PROGRAM in a comint buffer and switch to it.
The buffer name is made by surrounding the file name of PROGRAM with `*'s.
The file name is used to make a symbol name, such as `comint-sh-hook', and any
hooks on this symbol are run in the buffer.
See `make-comint' and `comint-exec'." t nil)

;;;***

;;;### (autoloads (compare-windows) "compare-w" "compare-w.el" (12536 45574))
;;; Generated autoloads from compare-w.el

(autoload (quote compare-windows) "compare-w" "\
Compare text in current window with text in next window.
Compares the text starting at point in each window,
moving over text in each one as far as they match.

This command pushes the mark in each window
at the prior location of point in that window.
If both windows display the same buffer,
the mark is pushed twice in that buffer:
first in the other window, then in the selected window.

A prefix arg means ignore changes in whitespace.
The variable `compare-windows-whitespace' controls how whitespace is skipped.
If `compare-ignore-case' is non-nil, changes in case are also ignored." t nil)

;;;***

;;;### (autoloads (next-error compilation-minor-mode compilation-mode grep compile) "compile" "compile.el" (12755 29072))
;;; Generated autoloads from compile.el

(defvar compilation-mode-hook nil "\
*List of hook functions run by `compilation-mode' (see `run-hooks').")

(defvar compilation-window-height nil "\
*Number of lines in a compilation window.  If nil, use Emacs default.")

(defvar compilation-buffer-name-function nil "\
Function to compute the name of a compilation buffer.
The function receives one argument, the name of the major mode of the
compilation buffer.  It should return a string.
nil means compute the name with `(concat \"*\" (downcase major-mode) \"*\")'.")

(defvar compilation-finish-function nil "\
*Function to call when a compilation process finishes.
It is called with two arguments: the compilation buffer, and a string
describing how the process finished.")

(defvar compilation-search-path (quote (nil)) "\
*List of directories to search for source files named in error messages.
Elements should be directory names, not file names of directories.
nil as an element means to try the default directory.")

(autoload (quote compile) "compile" "\
Compile the program including the current buffer.  Default: run `make'.
Runs COMMAND, a shell command, in a separate process asynchronously
with output going to the buffer `*compilation*'.

You can then use the command \\[next-error] to find the next error message
and move to the source code that caused it.

Interactively, prompts for the command if `compilation-read-command' is
non-nil; otherwise uses `compile-command'.  With prefix arg, always prompts.

To run more than one compilation at once, start one and rename the
`*compilation*' buffer to some other name with \\[rename-buffer].
Then start the next one.

The name used for the buffer is actually whatever is returned by
the function in `compilation-buffer-name-function', so you can set that
to a function that generates a unique name." t nil)

(autoload (quote grep) "compile" "\
Run grep, with user-specified args, and collect output in a buffer.
While grep runs asynchronously, you can use the \\[next-error] command
to find the text that grep hits refer to.

This command uses a special history list for its arguments, so you can
easily repeat a grep command." t nil)

(autoload (quote compilation-mode) "compile" "\
Major mode for compilation log buffers.
\\<compilation-mode-map>To visit the source for a line-numbered error,
move point to the error message line and type \\[compile-goto-error].
To kill the compilation, type \\[kill-compilation].

Runs `compilation-mode-hook' with `run-hooks' (which see)." t nil)

(autoload (quote compilation-minor-mode) "compile" "\
Toggle compilation minor mode.
With arg, turn compilation mode on if and only if arg is positive.
See `compilation-mode'.
Turning the mode on runs the normal hook `compilation-minor-mode-hook'." t nil)

(autoload (quote next-error) "compile" "\
Visit next compilation error message and corresponding source code.
This operates on the output from the \\[compile] command.
If all preparsed error messages have been processed,
the error message buffer is checked for new ones.

A prefix arg specifies how many error messages to move;
negative means move back to previous error messages.
Just C-u as a prefix means reparse the error message buffer
and start at the first error.

\\[next-error] normally applies to the most recent compilation started,
but as long as you are in the middle of parsing errors from one compilation
output buffer, you stay with that compilation output buffer.

Use \\[next-error] in a compilation output buffer to switch to
processing errors from that compilation.

See variables `compilation-parse-errors-function' and
`compilation-error-regexp-alist' for customization ideas." t nil)
 (define-key ctl-x-map "`" 'next-error)

;;;***

;;;### (autoloads (shuffle-vector cookie-snarf cookie-insert cookie) "cookie1" "cookie1.el" (12575 62819))
;;; Generated autoloads from cookie1.el

(autoload (quote cookie) "cookie1" "\
Return a random phrase from PHRASE-FILE.  When the phrase file
is read in, display STARTMSG at beginning of load, ENDMSG at end." nil nil)

(autoload (quote cookie-insert) "cookie1" "\
Insert random phrases from PHRASE-FILE; COUNT of them.  When the phrase file
is read in, display STARTMSG at beginning of load, ENDMSG at end." nil nil)

(autoload (quote cookie-snarf) "cookie1" "\
Reads in the PHRASE-FILE, returns it as a vector of strings.
Emit STARTMSG and ENDMSG before and after.  Caches the result; second
and subsequent calls on the same file won't go to disk." nil nil)

(autoload (quote shuffle-vector) "cookie1" "\
Randomly permute the elements of VECTOR (all permutations equally likely)" nil nil)

;;;***

;;;### (autoloads (copyright copyright-update) "copyright" "copyright.el" (12545 51536))
;;; Generated autoloads from copyright.el

(autoload (quote copyright-update) "copyright" "\
Update the copyright notice at the beginning of the buffer to indicate
the current year.  If optional prefix ARG is given replace the years in the
notice rather than adding the current year after them.  If necessary and
`copyright-current-gpl-version' is set, the copying permissions following the
copyright, if any, are updated as well." t nil)

(autoload (quote copyright) "copyright" "\
Insert a copyright by $ORGANIZATION notice at cursor." t nil)

;;;***

;;;### (autoloads (cpp-parse-edit cpp-highlight-buffer) "cpp" "cpp.el" (12575 62821))
;;; Generated autoloads from cpp.el

(autoload (quote cpp-highlight-buffer) "cpp" "\
Highlight C code according to preprocessor conditionals.
This command pops up a buffer which you should edit to specify
what kind of highlighting to use, and the criteria for highlighting.
A prefix arg suppresses display of that buffer." t nil)

(autoload (quote cpp-parse-edit) "cpp" "\
Edit display information for cpp conditionals." t nil)

;;;***

;;;### (autoloads (dabbrev-expand dabbrev-completion) "dabbrev" "dabbrev.el" (12805 29976))
;;; Generated autoloads from dabbrev.el

(define-key esc-map "/" (quote dabbrev-expand))

(define-key esc-map [67108911] (quote dabbrev-completion))

(autoload (quote dabbrev-completion) "dabbrev" "\
Completion on current word.
Like \\[dabbrev-expand] but finds all expansions in the current buffer
and presents suggestions for completion.

With a prefix argument, it searches all buffers accepted by the
function pointed out by `dabbrev-friend-buffer-function' to find the
completions.

If the prefix argument is 16 (which comes from C-u C-u),
then it searches *all* buffers.

With no prefix argument, it reuses an old completion list
if there is a suitable one already." t nil)

(autoload (quote dabbrev-expand) "dabbrev" "\
Expand previous word \"dynamically\".

Expands to the most recent, preceding word for which this is a prefix.
If no suitable preceding word is found, words following point are
considered.  If still no suitable word is found, then look in the
buffers accepted by the function pointed out by variable
`dabbrev-friend-buffer-function'.

A positive prefix argument, N, says to take the Nth backward *distinct*
possibility.  A negative argument says search forward.

If the cursor has not moved from the end of the previous expansion and
no argument is given, replace the previously-made expansion
with the next possible expansion not yet tried.

The variable `dabbrev-backward-only' may be used to limit the
direction of search to backward if set non-nil.

See also `dabbrev-abbrev-char-regexp' and \\[dabbrev-completion]." t nil)

;;;***

;;;### (autoloads (cancel-debug-on-entry debug-on-entry debug) "debug" "debug.el" (12716 34307))
;;; Generated autoloads from debug.el

(setq debugger (quote debug))

(autoload (quote debug) "debug" "\
Enter debugger.  To return, type \\<debugger-mode-map>`\\[debugger-continue]'.
Arguments are mainly for use when this is called from the internals
of the evaluator.

You may call with no args, or you may pass nil as the first arg and
any other args you like.  In that case, the list of args after the
first will be printed into the backtrace buffer." t nil)

(autoload (quote debug-on-entry) "debug" "\
Request FUNCTION to invoke debugger each time it is called.
If you tell the debugger to continue, FUNCTION's execution proceeds.
This works by modifying the definition of FUNCTION,
which must be written in Lisp, not predefined.
Use \\[cancel-debug-on-entry] to cancel the effect of this command.
Redefining FUNCTION also cancels it." t nil)

(autoload (quote cancel-debug-on-entry) "debug" "\
Undo effect of \\[debug-on-entry] on FUNCTION.
If argument is nil or an empty string, cancel for all functions." t nil)

;;;***

;;;### (autoloads (decipher-mode decipher) "decipher" "decipher.el" (12785 5878))
;;; Generated autoloads from decipher.el

(autoload (quote decipher) "decipher" "\
Format a buffer of ciphertext for cryptanalysis and enter Decipher mode." t nil)

(autoload (quote decipher-mode) "decipher" "\
Major mode for decrypting monoalphabetic substitution ciphers.
Lower-case letters enter plaintext.
Upper-case letters are commands.

The buffer is made read-only so that normal Emacs commands cannot
modify it.

The most useful commands are:
\\<decipher-mode-map>
\\[decipher-digram-list]  Display a list of all digrams & their frequency
\\[decipher-frequency-count]  Display the frequency of each ciphertext letter
\\[decipher-adjacency-list]  Show adjacency list for current letter (lists letters appearing next to it)
\\[decipher-make-checkpoint]  Save the current cipher alphabet (checkpoint)
\\[decipher-restore-checkpoint]  Restore a saved cipher alphabet (checkpoint)" t nil)

;;;***

;;;### (autoloads (delete-selection-mode) "delsel" "delsel.el" (12546 1864))
;;; Generated autoloads from delsel.el

(defalias (quote pending-delete-mode) (quote delete-selection-mode))

(autoload (quote delete-selection-mode) "delsel" "\
Toggle Delete Selection mode.
When ON, typed text replaces the selection if the selection is active.
When OFF, typed text is just inserted at point." t nil)

;;;***

;;;### (autoloads (derived-mode-init-mode-variables define-derived-mode) "derived" "derived.el" (12704 56747))
;;; Generated autoloads from derived.el

(autoload (quote define-derived-mode) "derived" "\
Create a new mode as a variant of an existing mode.

The arguments to this command are as follow:

CHILD:     the name of the command for the derived mode.
PARENT:    the name of the command for the parent mode (ie. text-mode).
NAME:      a string which will appear in the status line (ie. \"Hypertext\")
DOCSTRING: an optional documentation string--if you do not supply one,
           the function will attempt to invent something useful.
BODY:      forms to execute just before running the
           hooks for the new mode.

Here is how you could define LaTeX-Thesis mode as a variant of LaTeX mode:

  (define-derived-mode LaTeX-thesis-mode LaTeX-mode \"LaTeX-Thesis\")

You could then make new key bindings for `LaTeX-thesis-mode-map'
without changing regular LaTeX mode.  In this example, BODY is empty,
and DOCSTRING is generated by default.

On a more complicated level, the following command uses sgml-mode as
the parent, and then sets the variable `case-fold-search' to nil:

  (define-derived-mode article-mode sgml-mode \"Article\"
    \"Major mode for editing technical articles.\"
    (setq case-fold-search nil))

Note that if the documentation string had been left out, it would have
been generated automatically, with a reference to the keymap." nil (quote macro))

(autoload (quote derived-mode-init-mode-variables) "derived" "\
Initialise variables for a new mode. 
Right now, if they don't already exist, set up a blank keymap, an
empty syntax table, and an empty abbrev table -- these will be merged
the first time the mode is used." nil nil)

;;;***

;;;### (autoloads (diary) "diary-lib" "diary-lib.el" (12704 37365))
;;; Generated autoloads from diary-lib.el

(autoload (quote diary) "diary-lib" "\
Generate the diary window for ARG days starting with the current date.
If no argument is provided, the number of days of diary entries is governed
by the variable `number-of-diary-entries'.  This function is suitable for
execution in a `.emacs' file." t nil)

;;;***

;;;### (autoloads (diff-backup diff) "diff" "diff.el" (12545 51550))
;;; Generated autoloads from diff.el

(autoload (quote diff) "diff" "\
Find and display the differences between OLD and NEW files.
Interactively the current buffer's file name is the default for NEW
and a backup file for NEW is the default for OLD.
With prefix arg, prompt for diff switches." t nil)

(autoload (quote diff-backup) "diff" "\
Diff this file with its backup file or vice versa.
Uses the latest backup, if there are several numerical backups.
If this file is a backup, diff it with its original.
The backup file is the first file given to `diff'." t nil)

;;;***

;;;### (autoloads (dired-noselect dired-other-frame dired-other-window dired) "dired" "dired.el" (12724 30616))
;;; Generated autoloads from dired.el

(defvar dired-listing-switches "-al" "\
*Switches passed to `ls' for dired.  MUST contain the `l' option.
May contain all other options that don't contradict `-l';
may contain even `F', `b', `i' and `s'.  See also the variable
`dired-ls-F-marks-symlinks' concerning the `F' switch.")

(defvar dired-chown-program (if (memq system-type (quote (hpux dgux usg-unix-v irix linux lignux))) "chown" (if (file-exists-p "/usr/sbin/chown") "/usr/sbin/chown" "/etc/chown")) "\
Name of chown command (usually `chown' or `/etc/chown').")

(defvar dired-ls-F-marks-symlinks nil "\
*Informs dired about how `ls -lF' marks symbolic links.
Set this to t if `ls' (or whatever program is specified by
`insert-directory-program') with `-lF' marks the symbolic link
itself with a trailing @ (usually the case under Ultrix).

Example: if `ln -s foo bar; ls -F bar' gives `bar -> foo', set it to
nil (the default), if it gives `bar@ -> foo', set it to t.

Dired checks if there is really a @ appended.  Thus, if you have a
marking `ls' program on one host and a non-marking on another host, and
don't care about symbolic links which really end in a @, you can
always set this variable to t.")

(defvar dired-trivial-filenames "^\\.\\.?$\\|^#" "\
*Regexp of files to skip when finding first file of a directory.
A value of nil means move to the subdir line.
A value of t means move to first file.")

(defvar dired-keep-marker-rename t "\
*Controls marking of renamed files.
If t, files keep their previous marks when they are renamed.
If a character, renamed files (whether previously marked or not)
are afterward marked with that character.")

(defvar dired-keep-marker-copy 67 "\
*Controls marking of copied files.
If t, copied files are marked if and as the corresponding original files were.
If a character, copied files are unconditionally marked with that character.")

(defvar dired-keep-marker-hardlink 72 "\
*Controls marking of newly made hard links.
If t, they are marked if and as the files linked to were marked.
If a character, new links are unconditionally marked with that character.")

(defvar dired-keep-marker-symlink 89 "\
*Controls marking of newly made symbolic links.
If t, they are marked if and as the files linked to were marked.
If a character, new links are unconditionally marked with that character.")

(defvar dired-dwim-target nil "\
*If non-nil, dired tries to guess a default target directory.
This means: if there is a dired buffer displayed in the next window,
use its current subdir, instead of the current subdir of this dired buffer.

The target is used in the prompt for file copy, rename etc.")

(defvar dired-copy-preserve-time t "\
*If non-nil, Dired preserves the last-modified time in a file copy.
\(This works on only some systems.)")
 (define-key ctl-x-map "d" 'dired)

(autoload (quote dired) "dired" "\
\"Edit\" directory DIRNAME--delete, rename, print, etc. some files in it.
Optional second argument SWITCHES specifies the `ls' options used.
\(Interactively, use a prefix argument to be able to specify SWITCHES.)
Dired displays a list of files in DIRNAME (which may also have
shell wildcards appended to select certain files).  If DIRNAME is a cons,
its first element is taken as the directory name and the rest as an explicit
list of files to make directory entries for.
\\<dired-mode-map>You can move around in it with the usual commands.
You can flag files for deletion with \\[dired-flag-file-deletion] and then
delete them by typing \\[dired-do-flagged-delete].
Type \\[describe-mode] after entering dired for more info.

If DIRNAME is already in a dired buffer, that buffer is used without refresh." t nil)
 (define-key ctl-x-4-map "d" 'dired-other-window)

(autoload (quote dired-other-window) "dired" "\
\"Edit\" directory DIRNAME.  Like `dired' but selects in another window." t nil)
 (define-key ctl-x-5-map "d" 'dired-other-frame)

(autoload (quote dired-other-frame) "dired" "\
\"Edit\" directory DIRNAME.  Like `dired' but makes a new frame." t nil)

(autoload (quote dired-noselect) "dired" "\
Like `dired' but returns the dired buffer as value, does not select it." nil nil)

;;;***

;;;### (autoloads (dired-do-query-replace dired-do-search dired-hide-all dired-hide-subdir dired-tree-down dired-tree-up dired-kill-subdir dired-mark-subdir-files dired-goto-subdir dired-prev-subdir dired-maybe-insert-subdir dired-downcase dired-upcase dired-do-symlink-regexp dired-do-hardlink-regexp dired-do-copy-regexp dired-do-rename-regexp dired-do-rename dired-do-hardlink dired-do-symlink dired-do-copy dired-create-directory dired-rename-file dired-copy-file dired-relist-file dired-remove-file dired-add-file dired-do-redisplay dired-do-load dired-do-byte-compile dired-do-compress dired-compress-file dired-do-kill-lines dired-do-shell-command dired-do-print dired-do-chown dired-do-chgrp dired-do-chmod dired-backup-diff dired-diff) "dired-aux" "dired-aux.el" (12682 60213))
;;; Generated autoloads from dired-aux.el

(autoload (quote dired-diff) "dired-aux" "\
Compare file at point with file FILE using `diff'.
FILE defaults to the file at the mark.
The prompted-for file is the first file given to `diff'.
With prefix arg, prompt for second argument SWITCHES,
 which is options for `diff'." t nil)

(autoload (quote dired-backup-diff) "dired-aux" "\
Diff this file with its backup file or vice versa.
Uses the latest backup, if there are several numerical backups.
If this file is a backup, diff it with its original.
The backup file is the first file given to `diff'.
With prefix arg, prompt for argument SWITCHES which is options for `diff'." t nil)

(autoload (quote dired-do-chmod) "dired-aux" "\
Change the mode of the marked (or next ARG) files.
This calls chmod, thus symbolic modes like `g+w' are allowed." t nil)

(autoload (quote dired-do-chgrp) "dired-aux" "\
Change the group of the marked (or next ARG) files." t nil)

(autoload (quote dired-do-chown) "dired-aux" "\
Change the owner of the marked (or next ARG) files." t nil)

(autoload (quote dired-do-print) "dired-aux" "\
Print the marked (or next ARG) files.
Uses the shell command coming from variables `lpr-command' and
`lpr-switches' as default." t nil)

(autoload (quote dired-do-shell-command) "dired-aux" "\
Run a shell command COMMAND on the marked files.
If no files are marked or a specific numeric prefix arg is given,
the next ARG files are used.  Just \\[universal-argument] means the current file.
The prompt mentions the file(s) or the marker, as appropriate.

If there is output, it goes to a separate buffer.

Normally the command is run on each file individually.
However, if there is a `*' in the command then it is run
just once with the entire file list substituted there.

No automatic redisplay of dired buffers is attempted, as there's no
telling what files the command may have changed.  Type
\\[dired-do-redisplay] to redisplay the marked files.

The shell command has the top level directory as working directory, so
output files usually are created there instead of in a subdir." t nil)

(autoload (quote dired-do-kill-lines) "dired-aux" "\
Kill all marked lines (not the files).
With a prefix argument, kill that many lines starting with the current line.
\(A negative argument kills lines before the current line.)
To kill an entire subdirectory, go to its directory header line
and use this command with a prefix argument (the value does not matter)." t nil)

(autoload (quote dired-compress-file) "dired-aux" nil nil nil)

(autoload (quote dired-do-compress) "dired-aux" "\
Compress or uncompress marked (or next ARG) files." t nil)

(autoload (quote dired-do-byte-compile) "dired-aux" "\
Byte compile marked (or next ARG) Emacs Lisp files." t nil)

(autoload (quote dired-do-load) "dired-aux" "\
Load the marked (or next ARG) Emacs Lisp files." t nil)

(autoload (quote dired-do-redisplay) "dired-aux" "\
Redisplay all marked (or next ARG) files.
If on a subdir line, redisplay that subdirectory.  In that case,
a prefix arg lets you edit the `ls' switches used for the new listing." t nil)

(autoload (quote dired-add-file) "dired-aux" nil nil nil)

(autoload (quote dired-remove-file) "dired-aux" nil nil nil)

(autoload (quote dired-relist-file) "dired-aux" nil nil nil)

(autoload (quote dired-copy-file) "dired-aux" nil nil nil)

(autoload (quote dired-rename-file) "dired-aux" nil nil nil)

(autoload (quote dired-create-directory) "dired-aux" "\
Create a directory called DIRECTORY." t nil)

(autoload (quote dired-do-copy) "dired-aux" "\
Copy all marked (or next ARG) files, or copy the current file.
This normally preserves the last-modified date when copying.
When operating on just the current file, you specify the new name.
When operating on multiple or marked files, you specify a directory,
and new copies of these files are made in that directory
with the same names that the files currently have." t nil)

(autoload (quote dired-do-symlink) "dired-aux" "\
Make symbolic links to current file or all marked (or next ARG) files.
When operating on just the current file, you specify the new name.
When operating on multiple or marked files, you specify a directory
and new symbolic links are made in that directory
with the same names that the files currently have." t nil)

(autoload (quote dired-do-hardlink) "dired-aux" "\
Add names (hard links) current file or all marked (or next ARG) files.
When operating on just the current file, you specify the new name.
When operating on multiple or marked files, you specify a directory
and new hard links are made in that directory
with the same names that the files currently have." t nil)

(autoload (quote dired-do-rename) "dired-aux" "\
Rename current file or all marked (or next ARG) files.
When renaming just the current file, you specify the new name.
When renaming multiple or marked files, you specify a directory." t nil)

(autoload (quote dired-do-rename-regexp) "dired-aux" "\
Rename marked files containing REGEXP to NEWNAME.
As each match is found, the user must type a character saying
  what to do with it.  For directions, type \\[help-command] at that time.
NEWNAME may contain \\=\\<n> or \\& as in `query-replace-regexp'.
REGEXP defaults to the last regexp used.
With a zero prefix arg, renaming by regexp affects the complete
  pathname - usually only the non-directory part of file names is used
  and changed." t nil)

(autoload (quote dired-do-copy-regexp) "dired-aux" "\
Copy all marked files containing REGEXP to NEWNAME.
See function `dired-rename-regexp' for more info." t nil)

(autoload (quote dired-do-hardlink-regexp) "dired-aux" "\
Hardlink all marked files containing REGEXP to NEWNAME.
See function `dired-rename-regexp' for more info." t nil)

(autoload (quote dired-do-symlink-regexp) "dired-aux" "\
Symlink all marked files containing REGEXP to NEWNAME.
See function `dired-rename-regexp' for more info." t nil)

(autoload (quote dired-upcase) "dired-aux" "\
Rename all marked (or next ARG) files to upper case." t nil)

(autoload (quote dired-downcase) "dired-aux" "\
Rename all marked (or next ARG) files to lower case." t nil)

(autoload (quote dired-maybe-insert-subdir) "dired-aux" "\
Insert this subdirectory into the same dired buffer.
If it is already present, just move to it (type \\[dired-do-redisplay] to refresh),
  else inserts it at its natural place (as `ls -lR' would have done).
With a prefix arg, you may edit the ls switches used for this listing.
  You can add `R' to the switches to expand the whole tree starting at
  this subdirectory.
This function takes some pains to conform to `ls -lR' output." t nil)

(autoload (quote dired-prev-subdir) "dired-aux" "\
Go to previous subdirectory, regardless of level.
When called interactively and not on a subdir line, go to this subdir's line." t nil)

(autoload (quote dired-goto-subdir) "dired-aux" "\
Go to end of header line of DIR in this dired buffer.
Return value of point on success, otherwise return nil.
The next char is either \\n, or \\r if DIR is hidden." t nil)

(autoload (quote dired-mark-subdir-files) "dired-aux" "\
Mark all files except `.' and `..'." t nil)

(autoload (quote dired-kill-subdir) "dired-aux" "\
Remove all lines of current subdirectory.
Lower levels are unaffected." t nil)

(autoload (quote dired-tree-up) "dired-aux" "\
Go up ARG levels in the dired tree." t nil)

(autoload (quote dired-tree-down) "dired-aux" "\
Go down in the dired tree." t nil)

(autoload (quote dired-hide-subdir) "dired-aux" "\
Hide or unhide the current subdirectory and move to next directory.
Optional prefix arg is a repeat factor.
Use \\[dired-hide-all] to (un)hide all directories." t nil)

(autoload (quote dired-hide-all) "dired-aux" "\
Hide all subdirectories, leaving only their header lines.
If there is already something hidden, make everything visible again.
Use \\[dired-hide-subdir] to (un)hide a particular subdirectory." t nil)

(autoload (quote dired-do-search) "dired-aux" "\
Search through all marked files for a match for REGEXP.
Stops when a match is found.
To continue searching for next match, use command \\[tags-loop-continue]." t nil)

(autoload (quote dired-do-query-replace) "dired-aux" "\
Do `query-replace-regexp' of FROM with TO, on all marked files.
Third arg DELIMITED (prefix arg) means replace only word-delimited matches.
If you exit (\\[keyboard-quit] or ESC), you can resume the query replace
with the command \\[tags-loop-continue]." t nil)

;;;***

;;;### (autoloads (dired-jump) "dired-x" "dired-x.el" (12545 51553))
;;; Generated autoloads from dired-x.el

(autoload (quote dired-jump) "dired-x" "\
Jump to dired buffer corresponding to current buffer.
If in a file, dired the current directory and move to file's line.
If in dired already, pop up a level and goto old directory's line.
In case the proper dired file line cannot be found, refresh the dired
buffer and try again." t nil)

;;;***

;;;### (autoloads (disassemble) "disass" "disass.el" (12649 12917))
;;; Generated autoloads from disass.el

(autoload (quote disassemble) "disass" "\
Print disassembled code for OBJECT in (optional) BUFFER.
OBJECT can be a symbol defined as a function, or a function itself
\(a lambda expression or a compiled-function object).
If OBJECT is not already compiled, we compile it, but do not
redefine OBJECT if it is a symbol." t nil)

;;;***

;;;### (autoloads (standard-display-european create-glyph standard-display-underline standard-display-graphic standard-display-g1 standard-display-ascii standard-display-default standard-display-8bit describe-current-display-table describe-display-table set-display-table-slot display-table-slot make-display-table) "disp-table" "disp-table.el" (12545 51557))
;;; Generated autoloads from disp-table.el

(autoload (quote make-display-table) "disp-table" "\
Return a new, empty display table." nil nil)

(autoload (quote display-table-slot) "disp-table" "\
Return the value of the extra slot in DISPLAY-TABLE named SLOT.
SLOT may be a number from 0 to 5 inclusive, or a slot name (symbol).
Valid symbols are `truncation', `wrap', `escape', `control',
`selective-display', and `vertical-border'." nil nil)

(autoload (quote set-display-table-slot) "disp-table" "\
Set the value of the extra slot in DISPLAY-TABLE named SLOT to VALUE.
SLOT may be a number from 0 to 5 inclusive, or a name (symbol).
Valid symbols are `truncation', `wrap', `escape', `control',
`selective-display', and `vertical-border'." nil nil)

(autoload (quote describe-display-table) "disp-table" "\
Describe the display table DT in a help buffer." nil nil)

(autoload (quote describe-current-display-table) "disp-table" "\
Describe the display table in use in the selected window and buffer." t nil)

(autoload (quote standard-display-8bit) "disp-table" "\
Display characters in the range L to H literally." nil nil)

(autoload (quote standard-display-default) "disp-table" "\
Display characters in the range L to H using the default notation." nil nil)

(autoload (quote standard-display-ascii) "disp-table" "\
Display character C using printable string S." nil nil)

(autoload (quote standard-display-g1) "disp-table" "\
Display character C as character SC in the g1 character set.
This function assumes that your terminal uses the SO/SI characters;
it is meaningless for an X frame." nil nil)

(autoload (quote standard-display-graphic) "disp-table" "\
Display character C as character GC in graphics character set.
This function assumes VT100-compatible escapes; it is meaningless for an
X frame." nil nil)

(autoload (quote standard-display-underline) "disp-table" "\
Display character C as character UC plus underlining." nil nil)

(autoload (quote create-glyph) "disp-table" nil nil nil)

(autoload (quote standard-display-european) "disp-table" "\
Toggle display of European characters encoded with ISO 8859.
When enabled, characters in the range of 160 to 255 display not
as octal escapes, but as accented characters.
With prefix argument, enable European character display iff arg is positive." t nil)

;;;***

;;;### (autoloads (dissociated-press) "dissociate" "dissociate.el" (12545 51558))
;;; Generated autoloads from dissociate.el

(autoload (quote dissociated-press) "dissociate" "\
Dissociate the text of the current buffer.
Output goes in buffer named *Dissociation*,
which is redisplayed each time text is added to it.
Every so often the user must say whether to continue.
If ARG is positive, require ARG chars of continuity.
If ARG is negative, require -ARG words of continuity.
Default is 2." t nil)

;;;***

;;;### (autoloads (docref-setup) "docref" "docref.el" (12545 51559))
;;; Generated autoloads from docref.el

(autoload (quote docref-setup) "docref" "\
Process docref cross-references in the current buffer.
See also \\(f@docref-subst)." t nil)

;;;***

;;;### (autoloads (doctor) "doctor" "doctor.el" (12668 63367))
;;; Generated autoloads from doctor.el

(autoload (quote doctor) "doctor" "\
Switch to *doctor* buffer and start giving psychotherapy." t nil)

;;;***

;;;### (autoloads (double-mode) "double" "double.el" (12545 51562))
;;; Generated autoloads from double.el

(autoload (quote double-mode) "double" "\
Toggle Double mode.
With prefix arg, turn Double mode on iff arg is positive.

When Double mode is on, some keys will insert different strings
when pressed twice.  See variable `double-map' for details." t nil)

;;;***

;;;### (autoloads (dunnet) "dunnet" "dunnet.el" (12602 11920))
;;; Generated autoloads from dunnet.el

(autoload (quote dunnet) "dunnet" "\
Switch to *dungeon* buffer and start game." t nil)

;;;***

;;;### (autoloads (easy-menu-create-keymaps easy-menu-do-define easy-menu-define) "easymenu" "easymenu.el" (12736 32257))
;;; Generated autoloads from easymenu.el

(autoload (quote easy-menu-define) "easymenu" "\
Define a menu bar submenu in maps MAPS, according to MENU.
The menu keymap is stored in symbol SYMBOL, both as its value
and as its function definition.   DOC is used as the doc string for SYMBOL.

The first element of MENU must be a string.  It is the menu bar item name.
The rest of the elements are menu items.

A menu item is usually a vector of three elements:  [NAME CALLBACK ENABLE]

NAME is a string--the menu item name.

CALLBACK is a command to run when the item is chosen,
or a list to evaluate when the item is chosen.

ENABLE is an expression; the item is enabled for selection
whenever this expression's value is non-nil.

Alternatively, a menu item may have the form: 

   [ NAME CALLBACK [ KEYWORD ARG ] ... ]

Where KEYWORD is one of the symbol defined below.

   :keys KEYS

KEYS is a string; a complex keyboard equivalent to this menu item.
This is normally not needed because keyboard equivalents are usually
computed automatically.

   :active ENABLE

ENABLE is an expression; the item is enabled for selection
whenever this expression's value is non-nil.

   :suffix NAME

NAME is a string; the name of an argument to CALLBACK.

   :style STYLE
   
STYLE is a symbol describing the type of menu item.  The following are
defined:  

toggle: A checkbox.  
        Currently just prepend the name with the string \"Toggle \".
radio: A radio button. 
nil: An ordinary menu item.

   :selected SELECTED

SELECTED is an expression; the checkbox or radio button is selected
whenever this expression's value is non-nil.
Currently just disable radio buttons, no effect on checkboxes.

A menu item can be a string.  Then that string appears in the menu as
unselectable text.  A string consisting solely of hyphens is displayed
as a solid horizontal line.

A menu item can be a list.  It is treated as a submenu.
The first element should be the submenu name.  That's used as the
menu item in the top-level menu.  The cdr of the submenu list
is a list of menu items, as above." nil (quote macro))

(autoload (quote easy-menu-do-define) "easymenu" nil nil nil)

(autoload (quote easy-menu-create-keymaps) "easymenu" nil nil nil)

;;;***

;;;### (autoloads (electric-buffer-list) "ebuff-menu" "ebuff-menu.el" (12575 62838))
;;; Generated autoloads from ebuff-menu.el

(autoload (quote electric-buffer-list) "ebuff-menu" "\
Pops up a buffer describing the set of Emacs buffers.
Vaguely like ITS lunar select buffer; combining typeoutoid buffer
listing with menuoid buffer selection.

If the very next character typed is a space then the buffer list
window disappears.  Otherwise, one may move around in the buffer list
window, marking buffers to be selected, saved or deleted.

To exit and select a new buffer, type a space when the cursor is on
the appropriate line of the buffer-list window.  Other commands are
much like those of buffer-menu-mode.

Calls value of `electric-buffer-menu-mode-hook' on entry if non-nil.

\\{electric-buffer-menu-mode-map}" t nil)

;;;***

;;;### (autoloads (Electric-command-history-redo-expression) "echistory" "echistory.el" (12545 51567))
;;; Generated autoloads from echistory.el

(autoload (quote Electric-command-history-redo-expression) "echistory" "\
Edit current history line in minibuffer and execute result.
With prefix arg NOCONFIRM, execute current line as-is without editing." t nil)

;;;***

;;;### (autoloads (edebug-eval-top-level-form def-edebug-spec) "edebug" "edebug.el" (12790 20773))
;;; Generated autoloads from edebug.el

(autoload (quote def-edebug-spec) "edebug" "\
Set the edebug-form-spec property of SYMBOL according to SPEC.
Both SYMBOL and SPEC are unevaluated. The SPEC can be 0, t, a symbol
\(naming a function), or a list." nil (quote macro))

(defalias (quote edebug-defun) (quote edebug-eval-top-level-form))

(autoload (quote edebug-eval-top-level-form) "edebug" "\
Evaluate a top level form, such as a defun or defmacro.
This is like `eval-defun', but the code is always instrumented for Edebug.
Print its name in the minibuffer and leave point where it is,
or if an error occurs, leave point after it with mark at the original point." t nil)

;;;***

;;;### (autoloads (ediff-documentation ediff-version ediff-revision ediff-patch-buffer ediff-patch-file run-ediff-from-cvs-buffer ediff-merge-revisions-with-ancestor ediff-merge-revisions ediff-merge-buffers-with-ancestor ediff-merge-buffers ediff-merge-files-with-ancestor ediff-merge-files ediff-regions-linewise ediff-regions-wordwise ediff-windows-linewise ediff-windows-wordwise ediff-merge-directory-revisions-with-ancestor ediff-merge-directory-revisions ediff-merge-directories-with-ancestor ediff-merge-directories ediff-directories3 ediff-directory-revisions ediff-directories ediff-buffers3 ediff-buffers ediff-files3 ediff-files) "ediff" "ediff.el" (12747 20842))
;;; Generated autoloads from ediff.el

(autoload (quote ediff-files) "ediff" "\
Run Ediff on a pair of files, FILE-A and FILE-B." t nil)

(autoload (quote ediff-files3) "ediff" "\
Run Ediff on three files, FILE-A, FILE-B, and FILE-C." t nil)

(defalias (quote ediff3) (quote ediff-files3))

(defalias (quote ediff) (quote ediff-files))

(autoload (quote ediff-buffers) "ediff" "\
Run Ediff on a pair of buffers, BUFFER-A and BUFFER-B." t nil)

(defalias (quote ebuffers) (quote ediff-buffers))

(autoload (quote ediff-buffers3) "ediff" "\
Run Ediff on three buffers, BUFFER-A, BUFFER-B, and BUFFER-C." t nil)

(defalias (quote ebuffers3) (quote ediff-buffers3))

(autoload (quote ediff-directories) "ediff" "\
Run Ediff on a pair of directories, DIR1 and DIR2, comparing files that have
the same name in both. The third argument, REGEXP, is a regular expression that
can be used to filter out certain file names." t nil)

(defalias (quote edirs) (quote ediff-directories))

(autoload (quote ediff-directory-revisions) "ediff" "\
Run Ediff on a directory, DIR1, comparing its files with their revisions.
The second argument, REGEXP, is a regular expression that filters the file
names. Only the files that are under revision control are taken into account." t nil)

(defalias (quote edir-revisions) (quote ediff-directory-revisions))

(autoload (quote ediff-directories3) "ediff" "\
Run Ediff on three directories, DIR1, DIR2, and DIR3, comparing files that
have the same name in all three. The last argument, REGEXP, is a regular
expression that can be used to filter out certain file names." t nil)

(defalias (quote edirs3) (quote ediff-directories3))

(autoload (quote ediff-merge-directories) "ediff" "\
Run Ediff on a pair of directories, DIR1 and DIR2, merging files that have
the same name in both. The third argument, REGEXP, is a regular expression that
can be used to filter out certain file names." t nil)

(defalias (quote edirs-merge) (quote ediff-merge-directories))

(autoload (quote ediff-merge-directories-with-ancestor) "ediff" "\
Merge files in directories DIR1 and DIR2 using files in ANCESTOR-DIR as ancestors.
Ediff merges files that have identical names in DIR1, DIR2. If a pair of files
in DIR1 and DIR2 doesn't have an ancestor in ANCESTOR-DIR, Ediff will merge
without ancestor. The fourth argument, REGEXP, is a regular expression that
can be used to filter out certain file names." t nil)

(autoload (quote ediff-merge-directory-revisions) "ediff" "\
Run Ediff on a directory, DIR1, merging its files with their revisions.
The second argument, REGEXP, is a regular expression that filters the file
names. Only the files that are under revision control are taken into account." t nil)

(defalias (quote edir-merge-revisions) (quote ediff-merge-directory-revisions))

(autoload (quote ediff-merge-directory-revisions-with-ancestor) "ediff" "\
Run Ediff on a directory, DIR1, merging its files with their revisions and ancestors.
The second argument, REGEXP, is a regular expression that filters the file
names. Only the files that are under revision control are taken into account." t nil)

(defalias (quote edir-merge-revisions-with-ancestor) (quote ediff-merge-directory-revisions-with-ancestor))

(defalias (quote edirs-merge-with-ancestor) (quote ediff-merge-directories-with-ancestor))

(autoload (quote ediff-windows-wordwise) "ediff" "\
Compare WIND-A and WIND-B, which are selected by clicking, wordwise.
With prefix argument, DUMB-MODE, or on a non-windowing display, works as
follows:
If WIND-A is nil, use selected window.
If WIND-B is nil, use window next to WIND-A." t nil)

(autoload (quote ediff-windows-linewise) "ediff" "\
Compare WIND-A and WIND-B, which are selected by clicking, linewise.
With prefix argument, DUMB-MODE, or on a non-windowing display, works as
follows:
If WIND-A is nil, use selected window.
If WIND-B is nil, use window next to WIND-A." t nil)

(autoload (quote ediff-regions-wordwise) "ediff" "\
Run Ediff on a pair of regions in two different buffers.
Regions (i.e., point and mark) are assumed to be set in advance.
This function is effective only for relatively small regions, up to 200
lines. For large regions, use `ediff-regions-linewise'." t nil)

(autoload (quote ediff-regions-linewise) "ediff" "\
Run Ediff on a pair of regions in two different buffers.
Regions (i.e., point and mark) are assumed to be set in advance.
Each region is enlarged to contain full lines.
This function is effective for large regions, over 100-200
lines. For small regions, use `ediff-regions-wordwise'." t nil)

(defalias (quote ediff-merge) (quote ediff-merge-files))

(autoload (quote ediff-merge-files) "ediff" "\
Merge two files without ancestor." t nil)

(autoload (quote ediff-merge-files-with-ancestor) "ediff" "\
Merge two files with ancestor." t nil)

(defalias (quote ediff-merge-with-ancestor) (quote ediff-merge-files-with-ancestor))

(autoload (quote ediff-merge-buffers) "ediff" "\
Merge buffers without ancestor." t nil)

(autoload (quote ediff-merge-buffers-with-ancestor) "ediff" "\
Merge buffers with ancestor." t nil)

(autoload (quote ediff-merge-revisions) "ediff" "\
Run Ediff by merging two revisions of a file.
The file is the optional FILE argument or the file visited by the current
buffer." t nil)

(autoload (quote ediff-merge-revisions-with-ancestor) "ediff" "\
Run Ediff by merging two revisions of a file with a common ancestor.
The file is the the optional FILE argument or the file visited by the current
buffer." t nil)

(autoload (quote run-ediff-from-cvs-buffer) "ediff" "\
Run Ediff-merge on appropriate revisions of the selected file.
First run after `M-x cvs-update'. Then place the cursor on a lide describing a
file and then run `run-ediff-from-cvs-buffer'." t nil)

(autoload (quote ediff-patch-file) "ediff" "\
Run Ediff by patching SOURCE-FILENAME." t nil)

(autoload (quote ediff-patch-buffer) "ediff" "\
Run Ediff by patching BUFFER-NAME." t nil)

(defalias (quote epatch) (quote ediff-patch-file))

(defalias (quote epatch-buffer) (quote ediff-patch-buffer))

(autoload (quote ediff-revision) "ediff" "\
Run Ediff by comparing versions of a file.
The file is an optional FILE argument or the file visited by the current
buffer. Use `vc.el' or `rcs.el' depending on `ediff-version-control-package'." t nil)

(autoload (quote ediff-version) "ediff" "\
Return string describing the version of Ediff.
When called interactively, displays the version." t nil)

(autoload (quote ediff-documentation) "ediff" "\
Display Ediff's manual." t nil)

;;;***

;;;### (autoloads (ediff-show-registry) "ediff-mult" "ediff-mult.el" (12747 21069))
;;; Generated autoloads from ediff-mult.el

(autoload (quote ediff-show-registry) "ediff-mult" "\
Display Ediff's registry." t nil)

(defalias (quote eregistry) (quote ediff-show-registry))

;;;***

;;;### (autoloads (insert-kbd-macro format-kbd-macro read-kbd-macro edit-named-kbd-macro edit-last-kbd-macro edit-kbd-macro) "edmacro" "edmacro.el" (12575 62849))
;;; Generated autoloads from edmacro.el
 (define-key ctl-x-map "\C-k" 'edit-kbd-macro)

(defvar edmacro-eight-bits nil "\
*Non-nil if edit-kbd-macro should leave 8-bit characters intact.
Default nil means to write characters above \\177 in octal notation.")

(autoload (quote edit-kbd-macro) "edmacro" "\
Edit a keyboard macro.
At the prompt, type any key sequence which is bound to a keyboard macro.
Or, type `C-x e' or RET to edit the last keyboard macro, `C-h l' to edit
the last 100 keystrokes as a keyboard macro, or `M-x' to edit a macro by
its command name.
With a prefix argument, format the macro in a more concise way." t nil)

(autoload (quote edit-last-kbd-macro) "edmacro" "\
Edit the most recently defined keyboard macro." t nil)

(autoload (quote edit-named-kbd-macro) "edmacro" "\
Edit a keyboard macro which has been given a name by `name-last-kbd-macro'." t nil)

(autoload (quote read-kbd-macro) "edmacro" "\
Read the region as a keyboard macro definition.
The region is interpreted as spelled-out keystrokes, e.g., \"M-x abc RET\".
See documentation for `edmacro-mode' for details.
Leading/trailing \"C-x (\" and \"C-x )\" in the text are allowed and ignored.
The resulting macro is installed as the \"current\" keyboard macro.

In Lisp, may also be called with a single STRING argument in which case
the result is returned rather than being installed as the current macro.
The result will be a string if possible, otherwise an event vector.
Second argument NEED-VECTOR means to return an event vector always." t nil)

(autoload (quote format-kbd-macro) "edmacro" "\
Return the keyboard macro MACRO as a human-readable string.
This string is suitable for passing to `read-kbd-macro'.
Second argument VERBOSE means to put one command per line with comments.
If VERBOSE is `1', put everything on one line.  If VERBOSE is omitted
or nil, use a compact 80-column format." nil nil)

(autoload (quote insert-kbd-macro) "edmacro" "\
Insert in buffer the definition of kbd macro NAME, as Lisp code.
Optional second arg KEYS means also record the keys it is on
\(this is the prefix argument, when calling interactively).

This Lisp code will, when executed, define the kbd macro with the same
definition it has now.  If you say to record the keys, the Lisp code
will also rebind those keys to the macro.  Only global key bindings
are recorded since executing this Lisp code always makes global
bindings.

To save a kbd macro, visit a file of Lisp code such as your `~/.emacs',
use this command, and then save the file." t nil)

;;;***

;;;### (autoloads (edt-emulation-on) "edt" "edt.el" (12575 62839))
;;; Generated autoloads from edt.el

(autoload (quote edt-emulation-on) "edt" "\
Turn on EDT Emulation." t nil)

;;;***

;;;### (autoloads (electric-helpify with-electric-help) "ehelp" "ehelp.el" (12719 4369))
;;; Generated autoloads from ehelp.el

(autoload (quote with-electric-help) "ehelp" "\
Pop up an \"electric\" help buffer.
The arguments are THUNK &optional BUFFER NOERASE MINHEIGHT.
THUNK is a function of no arguments which is called to initialize the
contents of BUFFER.  BUFFER defaults to `*Help*'.  BUFFER will be
erased before THUNK is called unless NOERASE is non-nil.  THUNK will
be called while BUFFER is current and with `standard-output' bound to
the buffer specified by BUFFER.

If THUNK returns nil, we display BUFFER starting at the top, and
shrink the window to fit.  If THUNK returns non-nil, we don't do those things.

After THUNK has been called, this function \"electrically\" pops up a window
in which BUFFER is displayed and allows the user to scroll through that buffer
in electric-help-mode. The window's height will be at least MINHEIGHT if
this value is non-nil.

If THUNK returns nil, we display BUFFER starting at the top, and
shrink the window to fit.  If THUNK returns non-nil, we don't do those
things.

When the user exits (with `electric-help-exit', or otherwise) the help
buffer's window disappears (i.e., we use `save-window-excursion')
BUFFER is put into `default-major-mode' (or `fundamental-mode') when we exit." nil nil)

(autoload (quote electric-helpify) "ehelp" nil nil nil)

;;;***

;;;### (autoloads (elp-submit-bug-report elp-results elp-instrument-package elp-instrument-list elp-restore-function elp-instrument-function) "elp" "elp.el" (12626 46701))
;;; Generated autoloads from elp.el

(autoload (quote elp-instrument-function) "elp" "\
Instrument FUNSYM for profiling.
FUNSYM must be a symbol of a defined function." t nil)

(autoload (quote elp-restore-function) "elp" "\
Restore an instrumented function to its original definition.
Argument FUNSYM is the symbol of a defined function." t nil)

(autoload (quote elp-instrument-list) "elp" "\
Instrument for profiling, all functions in `elp-function-list'.
Use optional LIST if provided instead." t nil)

(autoload (quote elp-instrument-package) "elp" "\
Instrument for profiling, all functions which start with PREFIX.
For example, to instrument all ELP functions, do the following:

    \\[elp-instrument-package] RET elp- RET" t nil)

(autoload (quote elp-results) "elp" "\
Display current profiling results.
If `elp-reset-after-results' is non-nil, then current profiling
information for all instrumented functions are reset after results are
displayed." t nil)

(autoload (quote elp-submit-bug-report) "elp" "\
Submit via mail, a bug report on elp." t nil)

;;;***

;;;### (autoloads (report-emacs-bug) "emacsbug" "emacsbug.el" (12620 12311))
;;; Generated autoloads from emacsbug.el

(autoload (quote report-emacs-bug) "emacsbug" "\
Report a bug in GNU Emacs.
Prompts for bug subject.  Leaves you in a mail buffer." t nil)

;;;***

;;;### (autoloads (emerge-merge-directories emerge-revisions-with-ancestor emerge-revisions emerge-files-with-ancestor-remote emerge-files-remote emerge-files-with-ancestor-command emerge-files-command emerge-buffers-with-ancestor emerge-buffers emerge-files-with-ancestor emerge-files) "emerge" "emerge.el" (12798 27204))
;;; Generated autoloads from emerge.el

(defvar menu-bar-emerge-menu (make-sparse-keymap "Emerge"))

(fset (quote menu-bar-emerge-menu) (symbol-value (quote menu-bar-emerge-menu)))

(define-key menu-bar-emerge-menu [emerge-merge-directories] (quote ("Merge Directories..." . emerge-merge-directories)))

(define-key menu-bar-emerge-menu [emerge-revisions-with-ancestor] (quote ("Revisions with Ancestor..." . emerge-revisions-with-ancestor)))

(define-key menu-bar-emerge-menu [emerge-revisions] (quote ("Revisions..." . emerge-revisions)))

(define-key menu-bar-emerge-menu [emerge-files-with-ancestor] (quote ("Files with Ancestor..." . emerge-files-with-ancestor)))

(define-key menu-bar-emerge-menu [emerge-files] (quote ("Files..." . emerge-files)))

(define-key menu-bar-emerge-menu [emerge-buffers-with-ancestor] (quote ("Buffers with Ancestor..." . emerge-buffers-with-ancestor)))

(define-key menu-bar-emerge-menu [emerge-buffers] (quote ("Buffers..." . emerge-buffers)))

(autoload (quote emerge-files) "emerge" "\
Run Emerge on two files." t nil)

(autoload (quote emerge-files-with-ancestor) "emerge" "\
Run Emerge on two files, giving another file as the ancestor." t nil)

(autoload (quote emerge-buffers) "emerge" "\
Run Emerge on two buffers." t nil)

(autoload (quote emerge-buffers-with-ancestor) "emerge" "\
Run Emerge on two buffers, giving another buffer as the ancestor." t nil)

(autoload (quote emerge-files-command) "emerge" nil nil nil)

(autoload (quote emerge-files-with-ancestor-command) "emerge" nil nil nil)

(autoload (quote emerge-files-remote) "emerge" nil nil nil)

(autoload (quote emerge-files-with-ancestor-remote) "emerge" nil nil nil)

(autoload (quote emerge-revisions) "emerge" "\
Emerge two RCS revisions of a file." t nil)

(autoload (quote emerge-revisions-with-ancestor) "emerge" "\
Emerge two RCS revisions of a file, with another revision as ancestor." t nil)

(autoload (quote emerge-merge-directories) "emerge" nil t nil)

;;;***

;;;### (autoloads (enriched-decode enriched-encode enriched-mode) "enriched" "enriched.el" (12697 61530))
;;; Generated autoloads from enriched.el

(autoload (quote enriched-mode) "enriched" "\
Minor mode for editing text/enriched files.
These are files with embedded formatting information in the MIME standard
text/enriched format.
Turning the mode on runs `enriched-mode-hook'.

More information about Enriched mode is available in the file 
etc/enriched.doc  in the Emacs distribution directory.

Commands:

\\<enriched-mode-map>\\{enriched-mode-map}" t nil)

(autoload (quote enriched-encode) "enriched" nil nil nil)

(autoload (quote enriched-decode) "enriched" nil nil nil)

;;;***

;;;### (autoloads (setenv) "env" "env.el" (12545 51598))
;;; Generated autoloads from env.el

(autoload (quote setenv) "env" "\
Set the value of the environment variable named VARIABLE to VALUE.
VARIABLE should be a string.  VALUE is optional; if not provided or is
`nil', the environment variable VARIABLE will be removed.  

Interactively, a prefix argument means to unset the variable.
Interactively, the current value (if any) of the variable
appears at the front of the history list when you type in the new value.

This function works by modifying `process-environment'." t nil)

;;;***

;;;### (autoloads (complete-tag select-tags-table tags-apropos list-tags tags-query-replace tags-search tags-loop-continue next-file find-tag-regexp find-tag-other-frame find-tag-other-window find-tag find-tag-noselect tags-table-files visit-tags-table) "etags" "etags.el" (12789 21264))
;;; Generated autoloads from etags.el

(defvar tags-file-name nil "\
*File name of tags table.
To switch to a new tags table, setting this variable is sufficient.
If you set this variable, do not also set `tags-table-list'.
Use the `etags' program to make a tags table file.")
 (put 'tags-file-name 'variable-interactive "fVisit tags table: ")

(defvar tags-table-list nil "\
*List of file names of tags tables to search.
An element that is a directory means the file \"TAGS\" in that directory.
To switch to a new list of tags tables, setting this variable is sufficient.
If you set this variable, do not also set `tags-file-name'.
Use the `etags' program to make a tags table file.")

(defvar tags-add-tables (quote ask-user) "\
*Control whether to add a new tags table to the current list.
t means do; nil means don't (always start a new list).
Any other value means ask the user whether to add a new tags table
to the current list (as opposed to starting a new list).")

(defvar find-tag-hook nil "\
*Hook to be run by \\[find-tag] after finding a tag.  See `run-hooks'.
The value in the buffer in which \\[find-tag] is done is used,
not the value in the buffer \\[find-tag] goes to.")

(defvar find-tag-default-function nil "\
*A function of no arguments used by \\[find-tag] to pick a default tag.
If nil, and the symbol that is the value of `major-mode'
has a `find-tag-default-function' property (see `put'), that is used.
Otherwise, `find-tag-default' is used.")

(autoload (quote visit-tags-table) "etags" "\
Tell tags commands to use tags table file FILE.
FILE should be the name of a file created with the `etags' program.
A directory name is ok too; it means file TAGS in that directory.

Normally \\[visit-tags-table] sets the global value of `tags-file-name'.
With a prefix arg, set the buffer-local value instead.
When you find a tag with \\[find-tag], the buffer it finds the tag
in is given a local value of this variable which is the name of the tags
file the tag was in." t nil)

(autoload (quote tags-table-files) "etags" "\
Return a list of files in the current tags table.
Assumes the tags table is the current buffer.  The file names are returned
as they appeared in the `etags' command that created the table, usually
without directory names." nil nil)

(autoload (quote find-tag-noselect) "etags" "\
Find tag (in current tags table) whose name contains TAGNAME.
Returns the buffer containing the tag's definition and moves its point there,
but does not select the buffer.
The default for TAGNAME is the expression in the buffer near point.

If second arg NEXT-P is t (interactively, with prefix arg), search for
another tag that matches the last tagname or regexp used.  When there are
multiple matches for a tag, more exact matches are found first.  If NEXT-P
is the atom `-' (interactively, with prefix arg that is a negative number
or just \\[negative-argument]), pop back to the previous tag gone to.

If third arg REGEXP-P is non-nil, treat TAGNAME as a regexp.

See documentation of variable `tags-file-name'." t nil)

(autoload (quote find-tag) "etags" "\
Find tag (in current tags table) whose name contains TAGNAME.
Select the buffer containing the tag's definition, and move point there.
The default for TAGNAME is the expression in the buffer around or before point.

If second arg NEXT-P is t (interactively, with prefix arg), search for
another tag that matches the last tagname or regexp used.  When there are
multiple matches for a tag, more exact matches are found first.  If NEXT-P
is the atom `-' (interactively, with prefix arg that is a negative number
or just \\[negative-argument]), pop back to the previous tag gone to.

See documentation of variable `tags-file-name'." t nil)
 (define-key esc-map "." 'find-tag)

(autoload (quote find-tag-other-window) "etags" "\
Find tag (in current tags table) whose name contains TAGNAME.
Select the buffer containing the tag's definition in another window, and
move point there.  The default for TAGNAME is the expression in the buffer
around or before point.

If second arg NEXT-P is t (interactively, with prefix arg), search for
another tag that matches the last tagname or regexp used.  When there are
multiple matches for a tag, more exact matches are found first.  If NEXT-P
is negative (interactively, with prefix arg that is a negative number or
just \\[negative-argument]), pop back to the previous tag gone to.

See documentation of variable `tags-file-name'." t nil)
 (define-key ctl-x-4-map "." 'find-tag-other-window)

(autoload (quote find-tag-other-frame) "etags" "\
Find tag (in current tags table) whose name contains TAGNAME.
Select the buffer containing the tag's definition in another frame, and
move point there.  The default for TAGNAME is the expression in the buffer
around or before point.

If second arg NEXT-P is t (interactively, with prefix arg), search for
another tag that matches the last tagname or regexp used.  When there are
multiple matches for a tag, more exact matches are found first.  If NEXT-P
is negative (interactively, with prefix arg that is a negative number or
just \\[negative-argument]), pop back to the previous tag gone to.

See documentation of variable `tags-file-name'." t nil)
 (define-key ctl-x-5-map "." 'find-tag-other-frame)

(autoload (quote find-tag-regexp) "etags" "\
Find tag (in current tags table) whose name matches REGEXP.
Select the buffer containing the tag's definition and move point there.

If second arg NEXT-P is t (interactively, with prefix arg), search for
another tag that matches the last tagname or regexp used.  When there are
multiple matches for a tag, more exact matches are found first.  If NEXT-P
is negative (interactively, with prefix arg that is a negative number or
just \\[negative-argument]), pop back to the previous tag gone to.

If third arg OTHER-WINDOW is non-nil, select the buffer in another window.

See documentation of variable `tags-file-name'." t nil)
 (define-key esc-map [?\C-.] 'find-tag-regexp)

(autoload (quote next-file) "etags" "\
Select next file among files in current tags table.

A first argument of t (prefix arg, if interactive) initializes to the
beginning of the list of files in the tags table.  If the argument is
neither nil nor t, it is evalled to initialize the list of files.

Non-nil second argument NOVISIT means use a temporary buffer
 to save time and avoid uninteresting warnings.

Value is nil if the file was already visited;
if the file was newly read in, the value is the filename." t nil)

(autoload (quote tags-loop-continue) "etags" "\
Continue last \\[tags-search] or \\[tags-query-replace] command.
Used noninteractively with non-nil argument to begin such a command (the
argument is passed to `next-file', which see).

Two variables control the processing we do on each file: the value of
`tags-loop-scan' is a form to be executed on each file to see if it is
interesting (it returns non-nil if so) and `tags-loop-operate' is a form to
evaluate to operate on an interesting file.  If the latter evaluates to
nil, we exit; otherwise we scan the next file." t nil)
 (define-key esc-map "," 'tags-loop-continue)

(autoload (quote tags-search) "etags" "\
Search through all files listed in tags table for match for REGEXP.
Stops when a match is found.
To continue searching for next match, use command \\[tags-loop-continue].

See documentation of variable `tags-file-name'." t nil)

(autoload (quote tags-query-replace) "etags" "\
Query-replace-regexp FROM with TO through all files listed in tags table.
Third arg DELIMITED (prefix arg) means replace only word-delimited matches.
If you exit (\\[keyboard-quit] or ESC), you can resume the query-replace
with the command \\[tags-loop-continue].

See documentation of variable `tags-file-name'." t nil)

(autoload (quote list-tags) "etags" "\
Display list of tags in file FILE.
This searches only the first table in the list, and no included tables.
FILE should be as it appeared in the `etags' command, usually without a
directory specification." t nil)

(autoload (quote tags-apropos) "etags" "\
Display list of all tags in tags table REGEXP matches." t nil)

(autoload (quote select-tags-table) "etags" "\
Select a tags table file from a menu of those you have already used.
The list of tags tables to select from is stored in `tags-table-set-list';
see the doc of that variable if you want to add names to the list." t nil)

(autoload (quote complete-tag) "etags" "\
Perform tags completion on the text around point.
Completes to the set of names listed in the current tags table.
The string to complete is chosen in the same way as the default
for \\[find-tag] (which see)." t nil)
 (define-key esc-map "\t" 'complete-tag)

;;;***

;;;### (autoloads (ethio-input-special-character ethio-replace-space ethio-modify-vowel sera-to-fidel-after-save fidel-to-sera-write-file sera-to-fidel-find-file fidel-to-sera-marker fidel-to-sera-mail fidel-to-sera-buffer fidel-to-sera-region sera-to-fidel-marker sera-to-fidel-mail sera-to-fidel-buffer sera-to-fidel-region) "ethio" "ethio.el" (12371 64242))
;;; Generated autoloads from ethio.el

(autoload (quote sera-to-fidel-region) "ethio" "\
Translates the characters in region from SERA to FIDEL.

If the 1st optional parameter ASCII-MODE is non-NIL, assumes that the
region begins in ASCII script.

If the 2nd optional parametr FORCE is non-NIL, translates even if the
buffer is read-only." t nil)

(autoload (quote sera-to-fidel-buffer) "ethio" "\
Translates the current buffer from SERA to FIDEL.

If the 1st optional parameter ASCII-MODE is non-NIL, assumes that the
current buffer begins in ASCII script.

If the 2nd optional panametr FORCE is non-NIL, translates even if the
buffer is read-only." t nil)

(autoload (quote sera-to-fidel-mail) "ethio" "\
Does SERA to FIDEL conversion for reading/writing mail and news.

If the buffer contains the markers \"<sera>\" and \"</sera>\",
converts the segment between the two markers in Ethio start mode and
the subject field in ASCII start mode.

If invoked interactively and there is no marker, converts both the
whole body and the subject field in Ethio start mode.

For backward compatibility, \"<ethiopic>\" and \"<>\" can be used instead of
\"<sera>\" and \"</sera>\"." t nil)

(autoload (quote sera-to-fidel-marker) "ethio" "\
If the buffer contains the markers \"<sera>\" and \"</sera>\",
converts the segment between the two markers from SERA to Fidel
in Ethio start mode.  The markers will not be removed." t nil)

(autoload (quote fidel-to-sera-region) "ethio" "\
Replaces all the FIDEL characters in the region to sera format.

If the 1st optional parameter ASCII-MODE is non-NIL, converts the
region so that it begins in ASCII script.

If the 2nd optional parameter FORCE is non-NIL, converts even if the
buffer is read-only." t nil)

(autoload (quote fidel-to-sera-buffer) "ethio" "\
Replace all the FIDEL characters in the current buffer to sera format.

If the 1st optional parameter ASCII-MODE is non-NIL,
convert the current buffer so that it begins in ASCII script.

If the 2nd optional parameter FORCE is non-NIL, converts even if the
buffer is read-only.

See also the description of the variables ethio-use-tigrigna-style,
ethio-quote-vowel-on-demand and ethio-numeric-reduction." t nil)

(autoload (quote fidel-to-sera-mail) "ethio" "\
Does FIDEL to SERA conversion for reading/writing mail and news.

If the buffer contains at least one Ethiopic character,
 1) inserts the string \"<sera>\" right after the header-body separator,
 2) inserts \"</sera>\" at the end of the buffer,
 3) converts the body into SERA in Ethiopic start mode, and
 4) converts the subject field in ASCII start mode." t nil)

(autoload (quote fidel-to-sera-marker) "ethio" "\
If the buffer contains the markers \"<sera>\" and \"</sera>\",
converts the segment between the two markers from Fidel to SERA
in Ethio start mode.  The markers will not be removed." t nil)

(autoload (quote sera-to-fidel-find-file) "ethio" "\
Intended to be called when a file whose name ends in \".sera\" is read in." nil nil)

(autoload (quote fidel-to-sera-write-file) "ethio" "\
Intended to be used as write-file-hooks for the files
whose name ends in \".sera\"." nil nil)

(autoload (quote sera-to-fidel-after-save) "ethio" "\
Intended to be used as after-save-hook for the files
whose name ends in \".sera\"." nil nil)

(autoload (quote ethio-modify-vowel) "ethio" "\
Modify the vowel of the FIDEL that is under the cursor." t nil)

(autoload (quote ethio-replace-space) "ethio" "\
In the specified region, replace spaces between two Ethiopic characters." t nil)

(autoload (quote ethio-input-special-character) "ethio" "\
Allow the user to input special characters." t nil)

;;;***

;;;### (autoloads (executable-self-display executable-set-magic) "executable" "executable.el" (12786 35238))
;;; Generated autoloads from executable.el

(autoload (quote executable-set-magic) "executable" "\
Set this buffer's interpreter to INTERPRETER with optional ARGUMENT.
The variables `executable-magicless-file-regexp', `executable-prefix',
`executable-insert', `executable-query' and `executable-chmod' control
when and how magic numbers are inserted or replaced and scripts made
executable." t nil)

(autoload (quote executable-self-display) "executable" "\
Turn a text file into a self-displaying Un*x command.
The magic number of such a command displays all lines but itself." t nil)

;;;***

;;;### (autoloads (f90-mode) "f90" "f90.el" (12755 36864))
;;; Generated autoloads from f90.el

(autoload (quote f90-mode) "f90" "\
Major mode for editing Fortran 90 code in free format.

\\[f90-indent-new-line] corrects current indentation and creates new indented line.
\\[f90-indent-line] indents the current line correctly. 
\\[f90-indent-subprogram] indents the current subprogram. 

Type `? or `\\[help-command] to display a list of built-in abbrevs for F90 keywords.

Key definitions:
\\{f90-mode-map}

Variables controlling indentation style and extra features:

 f90-do-indent
    Extra indentation within do blocks.  (default 3)
 f90-if-indent
    Extra indentation within if/select case/where/forall blocks. (default 3)
 f90-type-indent
    Extra indentation within type/interface/block-data blocks.  (default 3)
 f90-program-indent
    Extra indentation within program/module/subroutine/function blocks.
      (default 2)
 f90-continuation-indent
    Extra indentation applied to continuation lines.  (default 5)
 f90-comment-region
    String inserted by \\[f90-comment-region] at start of each line in 
    region.  (default \"!!!$\")
 f90-indented-comment-re
    Regexp determining the type of comment to be intended like code.
    (default \"!\")
 f90-directive-comment-re
    Regexp of comment-like directive like \"!HPF\\\\$\", not to be indented.
    (default \"!hpf\\\\$\")
 f90-break-delimiters
    Regexp holding list of delimiters at which lines may be broken.
    (default \"[-+*/><=,% \\t]\")
 f90-break-before-delimiters
    Non-nil causes `f90-do-auto-fill' to break lines before delimiters.
    (default t)
 f90-beginning-ampersand 
    Automatic insertion of & at beginning of continuation lines. (default t)
 f90-smart-end 
    From an END statement, check and fill the end using matching block start.
    Allowed values are 'blink, 'no-blink, and nil, which determine
    whether to blink the matching beginning.) (default 'blink)
 f90-auto-keyword-case
    Automatic change of case of keywords. (default nil)
    The possibilities are 'downcase-word, 'upcase-word, 'capitalize-word.
 f90-leave-line-no
    Do not left-justify line numbers. (default nil)
 f90-startup-message
    Set to nil to inhibit message first time F90 mode is used. (default t)
 f90-keywords-re
    List of keywords used for highlighting/upcase-keywords etc.

Turning on F90 mode calls the value of the variable `f90-mode-hook'
with no args, if that value is non-nil." t nil)

;;;***

;;;### (autoloads (list-colors-display facemenu-read-color list-text-properties-at facemenu-remove-special facemenu-remove-all facemenu-remove-props facemenu-set-read-only facemenu-set-intangible facemenu-set-invisible facemenu-set-face-from-menu facemenu-set-background facemenu-set-foreground facemenu-set-face) "facemenu" "facemenu.el" (12728 53123))
;;; Generated autoloads from facemenu.el
 (define-key global-map "\M-g" 'facemenu-keymap)
 (autoload 'facemenu-keymap "facemenu" "Keymap for face-changing commands." t 'keymap)

(defvar facemenu-face-menu (let ((map (make-sparse-keymap "Face"))) (define-key map "o" (cons "Other..." (quote facemenu-set-face))) map) "\
Menu keymap for faces.")

(defalias (quote facemenu-face-menu) facemenu-face-menu)

(defvar facemenu-foreground-menu (let ((map (make-sparse-keymap "Foreground Color"))) (define-key map "o" (cons "Other..." (quote facemenu-set-foreground))) map) "\
Menu keymap for foreground colors.")

(defalias (quote facemenu-foreground-menu) facemenu-foreground-menu)

(defvar facemenu-background-menu (let ((map (make-sparse-keymap "Background Color"))) (define-key map "o" (cons "Other..." (quote facemenu-set-background))) map) "\
Menu keymap for background colors")

(defalias (quote facemenu-background-menu) facemenu-background-menu)

(defvar facemenu-special-menu (let ((map (make-sparse-keymap "Special"))) (define-key map [115] (cons "Remove Special" (quote facemenu-remove-special))) (define-key map [116] (cons "Intangible" (quote facemenu-set-intangible))) (define-key map [118] (cons "Invisible" (quote facemenu-set-invisible))) (define-key map [114] (cons "Read-Only" (quote facemenu-set-read-only))) map) "\
Menu keymap for non-face text-properties.")

(defalias (quote facemenu-special-menu) facemenu-special-menu)

(defvar facemenu-justification-menu (let ((map (make-sparse-keymap "Justification"))) (define-key map [99] (cons "Center" (quote set-justification-center))) (define-key map [98] (cons "Full" (quote set-justification-full))) (define-key map [114] (cons "Right" (quote set-justification-right))) (define-key map [108] (cons "Left" (quote set-justification-left))) (define-key map [117] (cons "Unfilled" (quote set-justification-none))) map) "\
Submenu for text justification commands.")

(defalias (quote facemenu-justification-menu) facemenu-justification-menu)

(defvar facemenu-indentation-menu (let ((map (make-sparse-keymap "Indentation"))) (define-key map [decrease-right-margin] (cons "Indent Right Less" (quote decrease-right-margin))) (define-key map [increase-right-margin] (cons "Indent Right More" (quote increase-right-margin))) (define-key map [decrease-left-margin] (cons "Indent Less" (quote decrease-left-margin))) (define-key map [increase-left-margin] (cons "Indent More" (quote increase-left-margin))) map) "\
Submenu for indentation commands.")

(defalias (quote facemenu-indentation-menu) facemenu-indentation-menu)

(defvar facemenu-menu nil "\
Facemenu top-level menu keymap.")

(setq facemenu-menu (make-sparse-keymap "Text Properties"))

(let ((map facemenu-menu)) (define-key map [dc] (cons "Display Colors" (quote list-colors-display))) (define-key map [df] (cons "Display Faces" (quote list-faces-display))) (define-key map [dp] (cons "List Properties" (quote list-text-properties-at))) (define-key map [ra] (cons "Remove All" (quote facemenu-remove-all))) (define-key map [rm] (cons "Remove Properties" (quote facemenu-remove-props))) (define-key map [s1] (list "-----------------")))

(let ((map facemenu-menu)) (define-key map [in] (cons "Indentation" (quote facemenu-indentation-menu))) (define-key map [ju] (cons "Justification" (quote facemenu-justification-menu))) (define-key map [s2] (list "-----------------")) (define-key map [sp] (cons "Special Properties" (quote facemenu-special-menu))) (define-key map [bg] (cons "Background Color" (quote facemenu-background-menu))) (define-key map [fg] (cons "Foreground Color" (quote facemenu-foreground-menu))) (define-key map [fc] (cons "Face" (quote facemenu-face-menu))))

(defalias (quote facemenu-menu) facemenu-menu)

(autoload (quote facemenu-set-face) "facemenu" "\
Add FACE to the region or next character typed.
It will be added to the top of the face list; any faces lower on the list that
will not show through at all will be removed.

Interactively, the face to be used is read with the minibuffer.

If the region is active and there is no prefix argument,
this command sets the region to the requested face.

Otherwise, this command specifies the face for the next character
inserted.  Moving point or switching buffers before
typing a character to insert cancels the specification." t nil)

(autoload (quote facemenu-set-foreground) "facemenu" "\
Set the foreground color of the region or next character typed.
The color is prompted for.  A face named `fg:color' is used (or created).
If the region is active, it will be set to the requested face.  If
it is inactive (even if mark-even-if-inactive is set) the next
character that is typed (via `self-insert-command') will be set to
the selected face.  Moving point or switching buffers before
typing a character cancels the request." t nil)

(autoload (quote facemenu-set-background) "facemenu" "\
Set the background color of the region or next character typed.
The color is prompted for.  A face named `bg:color' is used (or created).
If the region is active, it will be set to the requested face.  If
it is inactive (even if mark-even-if-inactive is set) the next
character that is typed (via `self-insert-command') will be set to
the selected face.  Moving point or switching buffers before
typing a character cancels the request." t nil)

(autoload (quote facemenu-set-face-from-menu) "facemenu" "\
Set the face of the region or next character typed.
This function is designed to be called from a menu; the face to use
is the menu item's name.

If the region is active and there is no prefix argument,
this command sets the region to the requested face.

Otherwise, this command specifies the face for the next character
inserted.  Moving point or switching buffers before
typing a character to insert cancels the specification." t nil)

(autoload (quote facemenu-set-invisible) "facemenu" "\
Make the region invisible.
This sets the `invisible' text property; it can be undone with
`facemenu-remove-special'." t nil)

(autoload (quote facemenu-set-intangible) "facemenu" "\
Make the region intangible: disallow moving into it.
This sets the `intangible' text property; it can be undone with
`facemenu-remove-special'." t nil)

(autoload (quote facemenu-set-read-only) "facemenu" "\
Make the region unmodifiable.
This sets the `read-only' text property; it can be undone with
`facemenu-remove-special'." t nil)

(autoload (quote facemenu-remove-props) "facemenu" "\
Remove all text properties that facemenu added to region." t nil)

(autoload (quote facemenu-remove-all) "facemenu" "\
Remove all text properties from the region." t nil)

(autoload (quote facemenu-remove-special) "facemenu" "\
Remove all the \"special\" text properties from the region.
These special properties include `invisible', `intangible' and `read-only'." t nil)

(autoload (quote list-text-properties-at) "facemenu" "\
Pop up a buffer listing text-properties at LOCATION." t nil)

(autoload (quote facemenu-read-color) "facemenu" "\
Read a color using the minibuffer." nil nil)

(autoload (quote list-colors-display) "facemenu" "\
Display names of defined colors, and show what they look like.
If the optional argument LIST is non-nil, it should be a list of
colors to display.  Otherwise, this command computes a list
of colors that the current display can handle." t nil)

;;;***

;;;### (autoloads (turn-on-fast-lock fast-lock-mode) "fast-lock" "fast-lock.el" (12750 18247))
;;; Generated autoloads from fast-lock.el

(autoload (quote fast-lock-mode) "fast-lock" "\
Toggle Fast Lock mode.
With arg, turn Fast Lock mode on if and only if arg is positive and the buffer
is associated with a file.  Enable it automatically in your `~/.emacs' by:

 (setq font-lock-support-mode 'fast-lock-mode)

If Fast Lock mode is enabled, and the current buffer does not contain any text
properties, any associated Font Lock cache is used if its timestamp matches the
buffer's file, and its `font-lock-keywords' match those that you are using.

Font Lock caches may be saved:
 - When you save the file's buffer.
 - When you kill an unmodified file's buffer.
 - When you exit Emacs, for all unmodified or saved buffers.
Depending on the value of `fast-lock-save-events'.
See also the commands `fast-lock-read-cache' and `fast-lock-save-cache'.

Use \\[font-lock-fontify-buffer] to fontify the buffer if the cache is bad.

Various methods of control are provided for the Font Lock cache.  In general,
see variable `fast-lock-cache-directories' and function `fast-lock-cache-name'.
For saving, see variables `fast-lock-minimum-size', `fast-lock-save-events',
`fast-lock-save-others' and `fast-lock-save-faces'.

Use \\[fast-lock-submit-bug-report] to send bug reports or feedback." t nil)

(autoload (quote turn-on-fast-lock) "fast-lock" "\
Unconditionally turn on Fast Lock mode." nil nil)

(if (fboundp (quote add-minor-mode)) (add-minor-mode (quote fast-lock-mode) nil))

;;;***

;;;### (autoloads (ffap-menu find-file-at-point ffap-next) "ffap" "ffap.el" (12629 23035))
;;; Generated autoloads from ffap.el

(autoload (quote ffap-next) "ffap" "\
Search buffer for next file or url, and run ffap.
Optional argument BACK says to search backwards.
Optional argument WRAP says to try wrapping around if necessary.
Interactively: use a single prefix to search backwards,
double prefix to wrap forward, triple to wrap backwards.
Actual search is done by `ffap-next-guess'." t nil)

(autoload (quote find-file-at-point) "ffap" "\
Find FILENAME (or url), guessing default from text around point.
If `ffap-dired-wildcards' is set, wildcard patterns are passed to dired.
See also the functions `ffap-file-at-point', `ffap-url-at-point'.
With a prefix, this command behaves *exactly* like `ffap-file-finder'.
If `ffap-require-prefix' is set, the prefix meaning is reversed.

See <ftp://ftp.mathcs.emory.edu/pub/mic/emacs/> for latest version." t nil)

(autoload (quote ffap-menu) "ffap" "\
Put up a menu of files and urls mentioned in this buffer.
Then set mark, jump to choice, and try to fetch it.  The menu is
cached in `ffap-menu-alist', and rebuilt by `ffap-menu-rescan'.
The optional RESCAN argument (a prefix, interactively) forces
a rebuild.  Searches with `ffap-menu-regexp'." t nil)

;;;***

;;;### (autoloads (find-grep-dired find-name-dired find-dired) "find-dired" "find-dired.el" (12545 51614))
;;; Generated autoloads from find-dired.el

(defvar find-ls-option (if (eq system-type (quote berkeley-unix)) (quote ("-ls" . "-gilsb")) (quote ("-exec ls -ld {} \\;" . "-ld"))) "\
*Description of the option to `find' to produce an `ls -l'-type listing.
This is a cons of two strings (FIND-OPTION . LS-SWITCHES).  FIND-OPTION
gives the option (or options) to `find' that produce the desired output.
LS-SWITCHES is a list of `ls' switches to tell dired how to parse the output.")

(defvar find-grep-options (if (eq system-type (quote berkeley-unix)) "-s" "-q") "\
*Option to grep to be as silent as possible.
On Berkeley systems, this is `-s'; on Posix, and with GNU grep, `-q' does it.
On other systems, the closest you can come is to use `-l'.")

(autoload (quote find-dired) "find-dired" "\
Run `find' and go into dired-mode on a buffer of the output.
The command run (after changing into DIR) is

    find . \\( ARGS \\) -ls" t nil)

(autoload (quote find-name-dired) "find-dired" "\
Search DIR recursively for files matching the globbing pattern PATTERN,
and run dired on those files.
PATTERN is a shell wildcard (not an Emacs regexp) and need not be quoted.
The command run (after changing into DIR) is

    find . -name 'PATTERN' -ls" t nil)

(autoload (quote find-grep-dired) "find-dired" "\
Find files in DIR containing a regexp ARG and start Dired on output.
The command run (after changing into DIR) is

    find . -exec grep -s ARG {} \\; -ls

Thus ARG can also contain additional grep options." t nil)

;;;***

;;;### (autoloads (ff-find-other-file ff-get-other-file) "find-file" "find-file.el" (12545 51615))
;;; Generated autoloads from find-file.el

(autoload (quote ff-get-other-file) "find-file" "\
Find the header or source file corresponding to this file.
See also the documentation for `ff-find-other-file;.

If optional IN-OTHER-WINDOW is non-nil, find the file in another window." t nil)

(autoload (quote ff-find-other-file) "find-file" "\
Find the header or source file corresponding to this file.
Being on a `#include' line pulls in that file.

If optional IN-OTHER-WINDOW is non-nil, find the file in the other window.
If optional IGNORE-INCLUDE is non-nil, ignore being on `#include' lines.

Variables of interest include:

 - ff-case-fold-search
   Non-nil means ignore cases in matches (see case-fold-search).
   If you have extensions in different cases, you will want this to be nil.

 - ff-always-in-other-window 
   If non-nil, always open the other file in another window, unless an
   argument is given to ff-find-other-file.

 - ff-ignore-include 
   If non-nil, ignores #include lines.

 - ff-always-try-to-create 
   If non-nil, always attempt to create the other file if it was not found.

 - ff-quiet-mode 
   If non-nil, traces which directories are being searched.

 - ff-special-constructs 
   A list of regular expressions specifying how to recognise special 
   constructs such as include files etc, and an associated method for 
   extracting the filename from that construct.

 - ff-other-file-alist
   Alist of extensions to find given the current file's extension.

 - ff-search-directories 
   List of directories searched through with each extension specified in
   ff-other-file-alist that matches this file's extension.

 - ff-pre-find-hooks 
   List of functions to be called before the search for the file starts.

 - ff-pre-load-hooks 
   List of functions to be called before the other file is loaded.

 - ff-post-load-hooks
   List of functions to be called after the other file is loaded.

 - ff-not-found-hooks
   List of functions to be called if the other file could not be found.

 - ff-file-created-hooks
   List of functions to be called if the other file has been created." t nil)

;;;***

;;;### (autoloads (enable-flow-control-on enable-flow-control) "flow-ctrl" "flow-ctrl.el" (12575 62873))
;;; Generated autoloads from flow-ctrl.el

(autoload (quote enable-flow-control) "flow-ctrl" "\
Toggle flow control handling.
When handling is enabled, user can type C-s as C-\\, and C-q as C-^.
With arg, enable flow control mode if arg is positive, otherwise disable." t nil)

(autoload (quote enable-flow-control-on) "flow-ctrl" "\
Enable flow control if using one of a specified set of terminal types.
Use `(enable-flow-control-on \"vt100\" \"h19\")' to enable flow control
on VT-100 and H19 terminals.  When flow control is enabled,
you must type C-\\ to get the effect of a C-s, and type C-^
to get the effect of a C-q." nil nil)

;;;***

;;;### (autoloads (follow-delete-other-windows-and-split follow-mode turn-off-follow-mode turn-on-follow-mode) "follow" "follow.el" (12653 19749))
;;; Generated autoloads from follow.el

(autoload (quote turn-on-follow-mode) "follow" "\
Turn on Follow mode. Please see the function `follow-mode'." t nil)

(autoload (quote turn-off-follow-mode) "follow" "\
Turn off Follow mode. Please see the function `follow-mode'." t nil)

(autoload (quote follow-mode) "follow" "\
Minor mode which combines windows into one tall virtual window.

The feeling of a \"virtual window\" has been accomplished by the use
of two major techniques:

* The windows always displays adjacent sections of the buffer. 
  This means that whenever one window is moved, all the
  others will follow.  (Hence the name Follow Mode.)

* Should the point (cursor) end up outside a window, another 
  window displaying that point is selected, if possible.  This 
  makes it possible to walk between windows using normal cursor 
  movement commands.

Follow mode comes to its prime when used on a large screen and two
side-by-side window are used. The user can, with the help of Follow
mode, use two full-height windows as though they would have been
one. Imagine yourself editing a large function, or section of text,
and beeing able to use 144 lines instead of the normal 72... (your
mileage may vary).

To split one large window into two side-by-side windows, the commands
`\\[split-window-horizontally]' or `M-x follow-delete-other-windows-and-split' can be used.

Only windows displayed in the same frame follow each-other.

If the variable `follow-intercept-processes' is non-nil, Follow mode
will listen to the output of processes and redisplay accordingly.
\(This is the default.)

When Follow mode is switched on, the hook `follow-mode-hook'
is called.  When turned off, `follow-mode-off-hook' is called.

Keys specific to Follow mode:
\\{follow-mode-map}" t nil)

(autoload (quote follow-delete-other-windows-and-split) "follow" "\
Create two side by side windows and enter Follow Mode.

Execute this command to display as much as possible of the text
in the selected window.  All other windows, in the current 
frame, are deleted and the selected window is split in two
side-by-side windows. Follow Mode is activated, hence the 
two windows always will display two successive pages.
\(If one window is moved, the other one will follow.)

If ARG is positive, the leftmost window is selected.  If it negative,
the rightmost is selected.  If ARG is nil, the leftmost window is
selected if the original window is the first one in the frame.

To bind this command to a hotkey, place the following line
in your `~/.emacs' file, replacing [f7] by your favourite key:
    (global-set-key [f7] 'follow-delete-other-windows-and-split)" t nil)

;;;***

;;;### (autoloads (font-lock-fontify-buffer global-font-lock-mode turn-on-font-lock font-lock-mode) "font-lock" "font-lock.el" (12797 18123))
;;; Generated autoloads from font-lock.el

(defvar font-lock-maximum-decoration nil "\
*Maximum decoration level for fontification.
If nil, use the default decoration (typically the minimum available).
If t, use the maximum decoration available.
If a number, use that level of decoration (or if not available the maximum).
If a list, each element should be a cons pair of the form (MAJOR-MODE . LEVEL),
where MAJOR-MODE is a symbol or t (meaning the default).  For example:
 ((c-mode . t) (c++-mode . 2) (t . 1))
means use the maximum decoration available for buffers in C mode, level 2
decoration for buffers in C++ mode, and level 1 decoration otherwise.")

(defvar font-lock-maximum-size (* 250 1024) "\
*Maximum size of a buffer for buffer fontification.
Only buffers less than this can be fontified when Font Lock mode is turned on.
If nil, means size is irrelevant.
If a list, each element should be a cons pair of the form (MAJOR-MODE . SIZE),
where MAJOR-MODE is a symbol or t (meaning the default).  For example:
 ((c-mode . 256000) (c++-mode . 256000) (rmail-mode . 1048576))
means that the maximum size is 250K for buffers in C or C++ modes, one megabyte
for buffers in Rmail mode, and size is irrelevant otherwise.")

(defvar font-lock-mode-hook nil "\
Function or functions to run on entry to Font Lock mode.")

(autoload (quote font-lock-mode) "font-lock" "\
Toggle Font Lock mode.
With arg, turn Font Lock mode on if and only if arg is positive.

When Font Lock mode is enabled, text is fontified as you type it:

 - Comments are displayed in `font-lock-comment-face';
 - Strings are displayed in `font-lock-string-face';
 - Certain other expressions are displayed in other faces according to the
   value of the variable `font-lock-keywords'.

You can enable Font Lock mode in any major mode automatically by turning on in
the major mode's hook.  For example, put in your ~/.emacs:

 (add-hook 'c-mode-hook 'turn-on-font-lock)

Alternatively, you can use Global Font Lock mode to automagically turn on Font
Lock mode in buffers whose major mode supports it and whose major mode is one
of `font-lock-global-modes'.  For example, put in your ~/.emacs:

 (global-font-lock-mode t)

There are a number of support modes that may be used to speed up Font Lock mode
in various ways, specified via the variable `font-lock-support-mode'.  Where
major modes support different levels of fontification, you can use the variable
`font-lock-maximum-decoration' to specify which level you generally prefer.
When you turn Font Lock mode on/off the buffer is fontified/defontified, though
fontification occurs only if the buffer is less than `font-lock-maximum-size'.

For example, to specify that Font Lock mode use use Lazy Lock mode as a support
mode and use maximum levels of fontification, put in your ~/.emacs:

 (setq font-lock-support-mode 'lazy-lock-mode)
 (setq font-lock-maximum-decoration t)

To fontify a buffer, without turning on Font Lock mode and regardless of buffer
size, you can use \\[font-lock-fontify-buffer].

To fontify a block (the function or paragraph containing point, or a number of
lines around point), perhaps because modification on the current line caused
syntactic change on other lines, you can use \\[font-lock-fontify-block].

The default Font Lock mode faces and their attributes are defined in the
variable `font-lock-face-attributes', and Font Lock mode default settings in
the variable `font-lock-defaults-alist'.  You can set your own default settings
for some mode, by setting a buffer local value for `font-lock-defaults', via
its mode hook." t nil)

(autoload (quote turn-on-font-lock) "font-lock" "\
Turn on Font Lock mode conditionally.
Turn on only if the terminal can display it." nil nil)

(defvar font-lock-global-modes t "\
*Modes for which Font Lock mode is automagically turned on.
Global Font Lock mode is controlled by the `global-font-lock-mode' command.
If nil, means no modes have Font Lock mode automatically turned on.
If t, all modes that support Font Lock mode have it automatically turned on.
If a list, it should be a list of `major-mode' symbol names for which Font Lock
mode should be automatically turned on.  The sense of the list is negated if it
begins with `not'.  For example:
 (c-mode c++-mode)
means that Font Lock mode is turned on for buffers in C and C++ modes only.")

(autoload (quote global-font-lock-mode) "font-lock" "\
Toggle Global Font Lock mode.
With prefix ARG, turn Global Font Lock mode on if and only if ARG is positive.
Displays a message saying whether the mode is on or off if MESSAGE is non-nil.
Returns the new status of Global Font Lock mode (non-nil means on).

When Global Font Lock mode is enabled, Font Lock mode is automagically
turned on in a buffer if its major mode is one of `font-lock-global-modes'." t nil)

(defvar font-lock-support-mode nil "\
*Support mode for Font Lock mode.
Support modes speed up Font Lock mode by being choosy about when fontification
occurs.  Known support modes are Fast Lock mode (symbol `fast-lock-mode') and
Lazy Lock mode (symbol `lazy-lock-mode').  See those modes for more info.
If nil, means support for Font Lock mode is never performed.
If a symbol, use that support mode.
If a list, each element should be of the form (MAJOR-MODE . SUPPORT-MODE),
where MAJOR-MODE is a symbol or t (meaning the default).  For example:
 ((c-mode . fast-lock-mode) (c++-mode . fast-lock-mode) (t . lazy-lock-mode))
means that Fast Lock mode is used to support Font Lock mode for buffers in C or
C++ modes, and Lazy Lock mode is used to support Font Lock mode otherwise.

The value of this variable is used when Font Lock mode is turned on.")

(autoload (quote font-lock-fontify-buffer) "font-lock" "\
Fontify the current buffer the way `font-lock-mode' would." t nil)

;;;***

;;;### (autoloads (forms-find-file-other-window forms-find-file forms-mode) "forms" "forms.el" (12599 26747))
;;; Generated autoloads from forms.el

(autoload (quote forms-mode) "forms" "\
Major mode to visit files in a field-structured manner using a form.

Commands:                        Equivalent keys in read-only mode:
 TAB            forms-next-field          TAB
 \\C-c TAB       forms-next-field          
 \\C-c <         forms-first-record         <
 \\C-c >         forms-last-record          >
 \\C-c ?         describe-mode              ?
 \\C-c \\C-k      forms-delete-record
 \\C-c \\C-q      forms-toggle-read-only     q
 \\C-c \\C-o      forms-insert-record
 \\C-c \\C-l      forms-jump-record          l
 \\C-c \\C-n      forms-next-record          n
 \\C-c \\C-p      forms-prev-record          p
 \\C-c \\C-r      forms-search-reverse       r
 \\C-c \\C-s      forms-search-forward       s
 \\C-c \\C-x      forms-exit                 x
" t nil)

(autoload (quote forms-find-file) "forms" "\
Visit a file in Forms mode." t nil)

(autoload (quote forms-find-file-other-window) "forms" "\
Visit a file in Forms mode in other window." t nil)

;;;***

;;;### (autoloads (fortran-mode) "fortran" "fortran.el" (12545 51631))
;;; Generated autoloads from fortran.el

(defvar fortran-tab-mode-default nil "\
*Default tabbing/carriage control style for empty files in Fortran mode.
A value of t specifies tab-digit style of continuation control.
A value of nil specifies that continuation lines are marked
with a character in column 6.")

(autoload (quote fortran-mode) "fortran" "\
Major mode for editing Fortran code.
\\[fortran-indent-line] indents the current Fortran line correctly. 
DO statements must not share a common CONTINUE.

Type ;? or ;\\[help-command] to display a list of built-in abbrevs for Fortran keywords.

Key definitions:
\\{fortran-mode-map}

Variables controlling indentation style and extra features:

 comment-start
    Normally nil in Fortran mode.  If you want to use comments
    starting with `!', set this to the string \"!\".
 fortran-do-indent
    Extra indentation within do blocks.  (default 3)
 fortran-if-indent
    Extra indentation within if blocks.  (default 3)
 fortran-structure-indent
    Extra indentation within structure, union, map and interface blocks.
    (default 3)
 fortran-continuation-indent
    Extra indentation applied to continuation statements.  (default 5)
 fortran-comment-line-extra-indent
    Amount of extra indentation for text within full-line comments. (default 0)
 fortran-comment-indent-style
    nil    means don't change indentation of text in full-line comments,
    fixed  means indent that text at `fortran-comment-line-extra-indent' beyond
           the value of `fortran-minimum-statement-indent-fixed' (for fixed
           format continuation style) or `fortran-minimum-statement-indent-tab'
           (for TAB format continuation style).
    relative  means indent at `fortran-comment-line-extra-indent' beyond the
 	      indentation for a line of code.
    (default 'fixed)
 fortran-comment-indent-char
    Single-character string to be inserted instead of space for
    full-line comment indentation.  (default \" \")
 fortran-minimum-statement-indent-fixed
    Minimum indentation for Fortran statements in fixed format mode. (def.6)
 fortran-minimum-statement-indent-tab
    Minimum indentation for Fortran statements in TAB format mode. (default 9)
 fortran-line-number-indent
    Maximum indentation for line numbers.  A line number will get
    less than this much indentation if necessary to avoid reaching
    column 5.  (default 1)
 fortran-check-all-num-for-matching-do
    Non-nil causes all numbered lines to be treated as possible \"continue\"
    statements.  (default nil)
 fortran-blink-matching-if 
    Non-nil causes \\[fortran-indent-line] on an ENDIF statement to blink on
    matching IF.  Also, from an ENDDO statement, blink on matching DO [WHILE]
    statement.  (default nil)
 fortran-continuation-string
    Single-character string to be inserted in column 5 of a continuation
    line.  (default \"$\")
 fortran-comment-region
    String inserted by \\[fortran-comment-region] at start of each line in 
    region.  (default \"c$$$\")
 fortran-electric-line-number
    Non-nil causes line number digits to be moved to the correct column 
    as typed.  (default t)
 fortran-break-before-delimiters
    Non-nil causes `fortran-fill' breaks lines before delimiters.
    (default t)
 fortran-startup-message
    Set to nil to inhibit message first time Fortran mode is used.

Turning on Fortran mode calls the value of the variable `fortran-mode-hook'
with no args, if that value is non-nil." t nil)

;;;***

;;;### (autoloads (gnus-batch-score gnus-fetch-group gnus gnus-other-frame gnus-slave gnus-no-server gnus-slave-no-server gnus-add-configuration gnus-update-format) "gnus" "gnus.el" (12777 3230))
;;; Generated autoloads from gnus.el

(autoload (quote gnus-update-format) "gnus" "\
Update the format specification near point." t nil)

(autoload (quote gnus-add-configuration) "gnus" "\
Add the window configuration CONF to `gnus-buffer-configuration'." nil nil)

(autoload (quote gnus-slave-no-server) "gnus" "\
Read network news as a slave, without connecting to local server" t nil)

(autoload (quote gnus-no-server) "gnus" "\
Read network news.
If ARG is a positive number, Gnus will use that as the
startup level.	If ARG is nil, Gnus will be started at level 2.
If ARG is non-nil and not a positive number, Gnus will
prompt the user for the name of an NNTP server to use.
As opposed to `gnus', this command will not connect to the local server." t nil)

(autoload (quote gnus-slave) "gnus" "\
Read news as a slave." t nil)

(autoload (quote gnus-other-frame) "gnus" "\
Pop up a frame to read news." t nil)

(autoload (quote gnus) "gnus" "\
Read network news.
If ARG is non-nil and a positive number, Gnus will use that as the
startup level.	If ARG is non-nil and not a positive number, Gnus will
prompt the user for the name of an NNTP server to use." t nil)

(autoload (quote gnus-fetch-group) "gnus" "\
Start Gnus if necessary and enter GROUP.
Returns whether the fetching was successful or not." t nil)

(defalias (quote gnus-batch-kill) (quote gnus-batch-score))

(autoload (quote gnus-batch-score) "gnus" "\
Run batched scoring.
Usage: emacs -batch -l gnus -f gnus-batch-score <newsgroups> ...
Newsgroups is a list of strings in Bnews format.  If you want to score
the comp hierarchy, you'd say \"comp.all\".  If you would not like to
score the alt hierarchy, you'd say \"!alt.all\"." t nil)

;;;***

;;;### (autoloads (gnus-cache-generate-nov-databases gnus-cache-generate-active gnus-jog-cache) "gnus-cache" "gnus-cache.el" (12777 3818))
;;; Generated autoloads from gnus-cache.el

(autoload (quote gnus-jog-cache) "gnus-cache" "\
Go through all groups and put the articles into the cache." t nil)

(autoload (quote gnus-cache-generate-active) "gnus-cache" "\
Generate the cache active file." t nil)

(autoload (quote gnus-cache-generate-nov-databases) "gnus-cache" "\
Generate NOV files recursively starting in DIR." t nil)

;;;***

;;;### (autoloads (gnus-batch-brew-soup) "gnus-soup" "gnus-soup.el" (12752 26765))
;;; Generated autoloads from gnus-soup.el

(autoload (quote gnus-batch-brew-soup) "gnus-soup" "\
Brew a SOUP packet from groups mention on the command line.
Will use the remaining command line arguments as regular expressions
for matching on group names.

For instance, if you want to brew on all the nnml groups, as well as
groups with \"emacs\" in the name, you could say something like:

$ emacs -batch -f gnus-batch-brew-soup ^nnml \".*emacs.*\"" t nil)

;;;### (autoloads (gomoku) "gomoku" "gomoku.el" (12645 30348))
;;; Generated autoloads from gomoku.el

(autoload (quote gomoku) "gomoku" "\
Start a Gomoku game between you and Emacs.
If a game is in progress, this command allow you to resume it.
If optional arguments N and M are given, an N by M board is used.
If prefix arg is given for N, M is prompted for.

You and Emacs play in turn by marking a free square.  You mark it with X
and Emacs marks it with O. The winner is the first to get five contiguous
marks horizontally, vertically or in diagonal.

You play by moving the cursor over the square you choose and hitting
\\<gomoku-mode-map>\\[gomoku-human-plays].
Use \\[describe-mode] for more info." t nil)

;;;***

;;;### (autoloads (goto-address goto-address-at-point goto-address-at-mouse) "goto-addr" "goto-addr.el" (12755 36278))
;;; Generated autoloads from goto-addr.el

(autoload (quote goto-address-at-mouse) "goto-addr" "\
Send to the e-mail address or load the URL clicked with the mouse.
Send mail to address at position of mouse click.  See documentation for
`goto-address-find-address-at-point'.  If no address is found
there, then load the URL at or before the position of the mouse click." t nil)

(autoload (quote goto-address-at-point) "goto-addr" "\
Send to the e-mail address or load the URL at point.
Send mail to address at point.  See documentation for
`goto-address-find-address-at-point'.  If no address is found
there, then load the URL at or before point." t nil)

(autoload (quote goto-address) "goto-addr" "\
Sets up goto-address functionality in the current buffer.
Allows user to use mouse/keyboard command to click to go to a URL
or to send e-mail.
By default, goto-address binds to mouse-2 and C-c RET.

Also fontifies the buffer appropriately (see `goto-address-fontify-p' and
`goto-address-highlight-p' for more information)." t nil)

;;;***

;;;### (autoloads (perldb xdb dbx sdb gdb) "gud" "gud.el" (12801 12634))
;;; Generated autoloads from gud.el

(autoload (quote gdb) "gud" "\
Run gdb on program FILE in buffer *gud-FILE*.
The directory containing FILE becomes the initial working directory
and source-file directory for your debugger." t nil)

(autoload (quote sdb) "gud" "\
Run sdb on program FILE in buffer *gud-FILE*.
The directory containing FILE becomes the initial working directory
and source-file directory for your debugger." t nil)

(autoload (quote dbx) "gud" "\
Run dbx on program FILE in buffer *gud-FILE*.
The directory containing FILE becomes the initial working directory
and source-file directory for your debugger." t nil)

(autoload (quote xdb) "gud" "\
Run xdb on program FILE in buffer *gud-FILE*.
The directory containing FILE becomes the initial working directory
and source-file directory for your debugger.

You can set the variable 'gud-xdb-directories' to a list of program source
directories if your program contains sources from more than one directory." t nil)

(autoload (quote perldb) "gud" "\
Run perldb on program FILE in buffer *gud-FILE*.
The directory containing FILE becomes the initial working directory
and source-file directory for your debugger." t nil)

;;;***

;;;### (autoloads (hanoi) "hanoi" "hanoi.el" (12579 52103))
;;; Generated autoloads from hanoi.el

(autoload (quote hanoi) "hanoi" "\
Towers of Hanoi diversion.  Argument is number of rings." t nil)

;;;***

;;;### (autoloads nil "help-macro" "help-macro.el" (12575 62899))
;;; Generated autoloads from help-macro.el

(defvar three-step-help nil "\
*Non-nil means give more info about Help command in three steps.
The three steps are simple prompt, prompt with all options,
and window listing and describing the options.
A value of nil means skip the middle step, so that
\\[help-command] \\[help-command] gives the window that lists the options.")

;;;***

;;;### (autoloads (Helper-help Helper-describe-bindings) "helper" "helper.el" (12545 51663))
;;; Generated autoloads from helper.el

(autoload (quote Helper-describe-bindings) "helper" "\
Describe local key bindings of current mode." t nil)

(autoload (quote Helper-help) "helper" "\
Provide help for current mode." t nil)

;;;***

;;;### (autoloads (hexlify-buffer hexl-find-file hexl-mode) "hexl" "hexl.el" (12732 38215))
;;; Generated autoloads from hexl.el

(autoload (quote hexl-mode) "hexl" "\
\\<hexl-mode-map>
A major mode for editing binary files in hex dump format.

This function automatically converts a buffer into the hexl format
using the function `hexlify-buffer'.

Each line in the buffer has an \"address\" (displayed in hexadecimal)
representing the offset into the file that the characters on this line
are at and 16 characters from the file (displayed as hexadecimal
values grouped every 16 bits) and as their ASCII values.

If any of the characters (displayed as ASCII characters) are
unprintable (control or meta characters) they will be replaced as
periods.

If `hexl-mode' is invoked with an argument the buffer is assumed to be
in hexl format.

A sample format:

  HEX ADDR: 0001 0203 0405 0607 0809 0a0b 0c0d 0e0f     ASCII-TEXT
  --------  ---- ---- ---- ---- ---- ---- ---- ----  ----------------
  00000000: 5468 6973 2069 7320 6865 786c 2d6d 6f64  This is hexl-mod
  00000010: 652e 2020 4561 6368 206c 696e 6520 7265  e.  Each line re
  00000020: 7072 6573 656e 7473 2031 3620 6279 7465  presents 16 byte
  00000030: 7320 6173 2068 6578 6164 6563 696d 616c  s as hexadecimal
  00000040: 2041 5343 4949 0a61 6e64 2070 7269 6e74   ASCII.and print
  00000050: 6162 6c65 2041 5343 4949 2063 6861 7261  able ASCII chara
  00000060: 6374 6572 732e 2020 416e 7920 636f 6e74  cters.  Any cont
  00000070: 726f 6c20 6f72 206e 6f6e 2d41 5343 4949  rol or non-ASCII
  00000080: 2063 6861 7261 6374 6572 730a 6172 6520   characters.are 
  00000090: 6469 7370 6c61 7965 6420 6173 2070 6572  displayed as per
  000000a0: 696f 6473 2069 6e20 7468 6520 7072 696e  iods in the prin
  000000b0: 7461 626c 6520 6368 6172 6163 7465 7220  table character 
  000000c0: 7265 6769 6f6e 2e0a                      region..

Movement is as simple as movement in a normal emacs text buffer.  Most
cursor movement bindings are the same (ie. Use \\[hexl-backward-char], \\[hexl-forward-char], \\[hexl-next-line], and \\[hexl-previous-line]
to move the cursor left, right, down, and up).

Advanced cursor movement commands (ala \\[hexl-beginning-of-line], \\[hexl-end-of-line], \\[hexl-beginning-of-buffer], and \\[hexl-end-of-buffer]) are
also supported.

There are several ways to change text in hexl mode:

ASCII characters (character between space (0x20) and tilde (0x7E)) are
bound to self-insert so you can simply type the character and it will
insert itself (actually overstrike) into the buffer.

\\[hexl-quoted-insert] followed by another keystroke allows you to insert the key even if
it isn't bound to self-insert.  An octal number can be supplied in place
of another key to insert the octal number's ASCII representation.

\\[hexl-insert-hex-char] will insert a given hexadecimal value (if it is between 0 and 0xFF)
into the buffer at the current point.

\\[hexl-insert-octal-char] will insert a given octal value (if it is between 0 and 0377)
into the buffer at the current point.

\\[hexl-insert-decimal-char] will insert a given decimal value (if it is between 0 and 255)
into the buffer at the current point.

\\[hexl-mode-exit] will exit hexl-mode.

Note: saving the file with any of the usual Emacs commands
will actually convert it back to binary format while saving.

You can use \\[hexl-find-file] to visit a file in hexl-mode.

\\[describe-bindings] for advanced commands." t nil)

(autoload (quote hexl-find-file) "hexl" "\
Edit file FILENAME in hexl-mode.
Switch to a buffer visiting file FILENAME, creating one in none exists." t nil)

(autoload (quote hexlify-buffer) "hexl" "\
Convert a binary buffer to hexl format.
This discards the buffer's undo information." t nil)

;;;***

;;;### (autoloads (hide-ifdef-mode) "hideif" "hideif.el" (12684 58610))
;;; Generated autoloads from hideif.el

(autoload (quote hide-ifdef-mode) "hideif" "\
Toggle Hide-Ifdef mode.  This is a minor mode, albeit a large one.
With ARG, turn Hide-Ifdef mode on if arg is positive, off otherwise.
In Hide-Ifdef mode, code within #ifdef constructs that the C preprocessor
would eliminate may be hidden from view.  Several variables affect
how the hiding is done:

hide-ifdef-env
	An association list of defined and undefined symbols for the
	current buffer.  Initially, the global value of `hide-ifdef-env'
	is used.

hide-ifdef-define-alist
	An association list of defined symbol lists.  
        Use `hide-ifdef-set-define-alist' to save the current `hide-ifdef-env'
        and `hide-ifdef-use-define-alist' to set the current `hide-ifdef-env'
        from one of the lists in `hide-ifdef-define-alist'.

hide-ifdef-lines
	Set to non-nil to not show #if, #ifdef, #ifndef, #else, and
	#endif lines when hiding.

hide-ifdef-initially
	Indicates whether `hide-ifdefs' should be called when Hide-Ifdef mode
	is activated.

hide-ifdef-read-only
	Set to non-nil if you want to make buffers read only while hiding.
	After `show-ifdefs', read-only status is restored to previous value.

\\{hide-ifdef-mode-map}" t nil)

(defvar hide-ifdef-initially nil "\
*Non-nil means call `hide-ifdefs' when Hide-Ifdef mode is first activated.")

(defvar hide-ifdef-read-only nil "\
*Set to non-nil if you want buffer to be read-only while hiding text.")

(defvar hide-ifdef-lines nil "\
*Non-nil means hide the #ifX, #else, and #endif lines.")

;;;***

;;;### (autoloads (hs-minor-mode hs-hide-block hs-hide-all) "hideshow" "hideshow.el" (12599 60349))
;;; Generated autoloads from hideshow.el

(autoload (quote hs-hide-all) "hideshow" "\
Hides all top-level blocks, displaying only first and last lines.
It moves point to the beginning of the line, and it runs the normal hook
`hs-hide-hook'.  See documentation for `run-hooks'." t nil)

(autoload (quote hs-hide-block) "hideshow" "\
Selects a block and hides it.  With prefix arg, reposition at end.
Block is defined as a sexp for lispish modes, mode-specific otherwise.
Comments are blocks, too.  Upon completion, point is at repositioned and
the normal hook `hs-hide-hook' is run.  See documentation for `run-hooks'." t nil)

(autoload (quote hs-minor-mode) "hideshow" "\
Toggle hideshow minor mode.
With ARG, turn hideshow minor mode on if ARG is positive, off otherwise.
When hideshow minor mode is on, the menu bar is augmented with hideshow
commands and the hideshow commands are enabled.  The variables
`selective-display' and `selective-display-ellipses' are set to t.
Last, the normal hook `hs-minor-mode-hook' is run; see the doc for `run-hooks'.

Turning hideshow minor mode off reverts the menu bar and the
variables to default values and disables the hideshow commands." t nil)

;;;***

;;;### (autoloads (make-hippie-expand-function hippie-expand) "hippie-exp" "hippie-exp.el" (12742 55524))
;;; Generated autoloads from hippie-exp.el

(defvar hippie-expand-try-functions-list (quote (try-complete-file-name-partially try-complete-file-name try-expand-all-abbrevs try-expand-list try-expand-line try-expand-dabbrev try-expand-dabbrev-all-buffers try-expand-dabbrev-from-kill try-complete-lisp-symbol-partially try-complete-lisp-symbol)) "\
The list of expansion functions tried in order by `hippie-expand'.
To change the behavior of `hippie-expand', remove, change the order of,
or insert functions in this list.")

(defvar hippie-expand-verbose t "\
*Non-nil makes `hippie-expand' output which function it is trying.")

(defvar hippie-expand-max-buffers nil "\
*The maximum number of buffers (apart from the current) searched.
If nil, all buffers are searched.")

(defvar hippie-expand-ignore-buffers (quote ("^ \\*.*\\*$" dired-mode)) "\
*A list specifying which buffers not to search (if not current).
Can contain both regexps matching buffer names (as strings) and major modes
\(as atoms)")

(autoload (quote hippie-expand) "hippie-exp" "\
Try to expand text before point, using multiple methods.
The expansion functions in `hippie-expand-try-functions-list' are
tried in order, until a possible expansion is found.  Repeated
application of `hippie-expand' inserts successively possible
expansions.  
With a positive numeric argument, jumps directly to the ARG next
function in this list.  With a negative argument or just \\[universal-argument], 
undoes the expansion." t nil)

(autoload (quote make-hippie-expand-function) "hippie-exp" "\
Construct a function similar to `hippie-expand'.
Make it use the expansion functions in TRY-LIST.  An optional second
argument VERBOSE non-nil makes the function verbose." nil (quote macro))

;;;***

;;;### (autoloads (icomplete-minibuffer-setup icomplete-mode) "icomplete" "icomplete.el" (12716 34325))
;;; Generated autoloads from icomplete.el

(autoload (quote icomplete-mode) "icomplete" "\
Activate incremental minibuffer completion for this emacs session,
or deactivate with negative prefix arg." t nil)

(autoload (quote icomplete-minibuffer-setup) "icomplete" "\
Run in minibuffer on activation to establish incremental completion.
Usually run by inclusion in `minibuffer-setup-hook'." nil nil)

;;;***

;;;### (autoloads (icon-mode) "icon" "icon.el" (12545 51672))
;;; Generated autoloads from icon.el

(autoload (quote icon-mode) "icon" "\
Major mode for editing Icon code.
Expression and list commands understand all Icon brackets.
Tab indents for Icon code.
Paragraphs are separated by blank lines only.
Delete converts tabs to spaces as it moves back.
\\{icon-mode-map}
Variables controlling indentation style:
 icon-tab-always-indent
    Non-nil means TAB in Icon mode should always reindent the current line,
    regardless of where in the line point is when the TAB command is used.
 icon-auto-newline
    Non-nil means automatically newline before and after braces
    inserted in Icon code.
 icon-indent-level
    Indentation of Icon statements within surrounding block.
    The surrounding block's indentation is the indentation
    of the line on which the open-brace appears.
 icon-continued-statement-offset
    Extra indentation given to a substatement, such as the
    then-clause of an if or body of a while.
 icon-continued-brace-offset
    Extra indentation given to a brace that starts a substatement.
    This is in addition to `icon-continued-statement-offset'.
 icon-brace-offset
    Extra indentation for line if it starts with an open brace.
 icon-brace-imaginary-offset
    An open brace following other text is treated as if it were
    this far to the right of the start of its line.

Turning on Icon mode calls the value of the variable `icon-mode-hook'
with no args, if that value is non-nil." t nil)

;;;***

;;;### (autoloads (ielm) "ielm" "ielm.el" (12545 51673))
;;; Generated autoloads from ielm.el
 (add-hook 'same-window-buffer-names "*ielm*")

(autoload (quote ielm) "ielm" "\
Interactively evaluate Emacs Lisp expressions.
Switches to the buffer `*ielm*', or creates it if it does not exist." t nil)

;;;***

;;;### (autoloads (imenu imenu-add-to-menubar) "imenu" "imenu.el" (12803 55621))
;;; Generated autoloads from imenu.el

(defvar imenu-generic-expression nil "\
The regex pattern to use for creating a buffer index.

If non-nil this pattern is passed to `imenu-create-index-with-pattern'
to create a buffer index.

It is an alist with elements that look like this: (MENU-TITLE
REGEXP INDEX). 

MENU-TITLE is a string used as the title for the submenu or nil if the
entries are not nested.

REGEXP is a regexp that should match a construct in the buffer that is
to be displayed in the menu; i.e., function or variable definitions,
etc.  It contains a substring which is the name to appear in the
menu.  See the info section on Regexps for more information.

INDEX points to the substring in REGEXP that contains the name (of the
function, variable or type) that is to appear in the menu.

For emacs-lisp-mode for example PATTERN would look like:

'((nil \"^\\\\s-*(def\\\\(un\\\\|subst\\\\|macro\\\\|advice\\\\)\\\\s-+\\\\([-A-Za-z0-9+]+\\\\)\" 2)
  (\"*Vars*\" \"^\\\\s-*(def\\\\(var\\\\|const\\\\)\\\\s-+\\\\([-A-Za-z0-9+]+\\\\)\" 2)
  (\"*Types*\" \"^\\\\s-*(def\\\\(type\\\\|struct\\\\|class\\\\|ine-condition\\\\)\\\\s-+\\\\([-A-Za-z0-9+]+\\\\)\" 2))

The variable is buffer-local.")

(make-variable-buffer-local (quote imenu-generic-expression))

(autoload (quote imenu-add-to-menubar) "imenu" "\
Adds an `imenu' entry to the menu bar for the current buffer.
NAME is a string used to name the menu bar item.
See the command `imenu' for more information." t nil)

(autoload (quote imenu) "imenu" "\
Jump to a place in the buffer chosen using a buffer menu or mouse menu.
See `imenu-choose-buffer-index' for more information." t nil)

;;;***

;;;### (autoloads (inferior-lisp) "inf-lisp" "inf-lisp.el" (12623 7617))
;;; Generated autoloads from inf-lisp.el

(defvar inferior-lisp-filter-regexp "\\`\\s *\\(:\\(\\w\\|\\s_\\)\\)?\\s *\\'" "\
*What not to save on inferior Lisp's input history.
Input matching this regexp is not saved on the input history in Inferior Lisp
mode.  Default is whitespace followed by 0 or 1 single-letter colon-keyword 
\(as in :a, :c, etc.)")

(defvar inferior-lisp-program "lisp" "\
*Program name for invoking an inferior Lisp with for Inferior Lisp mode.")

(defvar inferior-lisp-load-command "(load \"%s\")\n" "\
*Format-string for building a Lisp expression to load a file.
This format string should use `%s' to substitute a file name
and should result in a Lisp expression that will command the inferior Lisp
to load that file.  The default works acceptably on most Lisps.
The string \"(progn (load \\\"%s\\\" :verbose nil :print t) (values))\\n\"
produces cosmetically superior output for this application,
but it works only in Common Lisp.")

(defvar inferior-lisp-prompt "^[^> \n]*>+:? *" "\
Regexp to recognise prompts in the Inferior Lisp mode.
Defaults to \"^[^> \\n]*>+:? *\", which works pretty good for Lucid, kcl,
and franz.  This variable is used to initialize `comint-prompt-regexp' in the 
Inferior Lisp buffer.

More precise choices:
Lucid Common Lisp: \"^\\\\(>\\\\|\\\\(->\\\\)+\\\\) *\"
franz: \"^\\\\(->\\\\|<[0-9]*>:\\\\) *\"
kcl: \"^>+ *\"

This is a fine thing to set in your .emacs file.")

(defvar inferior-lisp-mode-hook (quote nil) "\
*Hook for customising Inferior Lisp mode.")

(autoload (quote inferior-lisp) "inf-lisp" "\
Run an inferior Lisp process, input and output via buffer `*inferior-lisp*'.
If there is a process already running in `*inferior-lisp*', just switch
to that buffer.
With argument, allows you to edit the command line (default is value
of `inferior-lisp-program').  Runs the hooks from
`inferior-lisp-mode-hook' (after the `comint-mode-hook' is run).
\(Type \\[describe-mode] in the process buffer for a list of commands.)" t nil)
 (add-hook 'same-window-buffer-names "*inferior-lisp*")

(defalias (quote run-lisp) (quote inferior-lisp))

;;;***

;;;### (autoloads (Info-goto-emacs-key-command-node Info-goto-emacs-command-node info-standalone info) "info" "info.el" (12810 40350))
;;; Generated autoloads from info.el
 (add-hook 'same-window-buffer-names "*info*")

(autoload (quote info) "info" "\
Enter Info, the documentation browser.
Optional argument FILE specifies the file to examine;
the default is the top-level directory of Info.

In interactive use, a prefix argument directs this command
to read a file name from the minibuffer.

The search path for Info files is in the variable `Info-directory-list'.
The top-level Info directory is made by combining all the files named `dir' 
in all the directories in that path." t nil)

(autoload (quote info-standalone) "info" "\
Run Emacs as a standalone Info reader.
Usage:  emacs -f info-standalone [filename]
In standalone mode, \\<Info-mode-map>\\[Info-exit] exits Emacs itself." nil nil)

(autoload (quote Info-goto-emacs-command-node) "info" "\
Go to the Info node in the Emacs manual for command COMMAND.
The command is found by looking up in Emacs manual's Command Index
or in another manual found via COMMAND's `info-file' property or
the variable `Info-file-list-for-emacs'." t nil)

(autoload (quote Info-goto-emacs-key-command-node) "info" "\
Go to the Info node in the Emacs manual the command bound to KEY, a string.
Interactively, if the binding is execute-extended-command, a command is read.
The command is found by looking up in Emacs manual's Command Index
or in another manual found via COMMAND's `info-file' property or
the variable `Info-file-list-for-emacs'." t nil)

;;;***

;;;### (autoloads (batch-info-validate Info-validate Info-split Info-tagify) "informat" "informat.el" (12546 1873))
;;; Generated autoloads from informat.el

(autoload (quote Info-tagify) "informat" "\
Create or update Info-file tag table in current buffer." t nil)

(autoload (quote Info-split) "informat" "\
Split an info file into an indirect file plus bounded-size subfiles.
Each subfile will be up to 50,000 characters plus one node.

To use this command, first visit a large Info file that has a tag
table.  The buffer is modified into a (small) indirect info file which
should be saved in place of the original visited file.

The subfiles are written in the same directory the original file is
in, with names generated by appending `-' and a number to the original
file name.  The indirect file still functions as an Info file, but it
contains just the tag table and a directory of subfiles." t nil)

(autoload (quote Info-validate) "informat" "\
Check current buffer for validity as an Info file.
Check that every node pointer points to an existing node." t nil)

(autoload (quote batch-info-validate) "informat" "\
Runs `Info-validate' on the files remaining on the command line.
Must be used only with -batch, and kills Emacs on completion.
Each file will be processed even if an error occurred previously.
For example, invoke \"emacs -batch -f batch-info-validate $info/ ~/*.info\"" nil nil)

;;;***

;;;### (autoloads (isearch-fep-quail isearch-fep-canna isearch-fep-egg isearch-fep-string) "isearch-ext" "isearch-ext.el" (12489 9565))
;;; Generated autoloads from isearch-ext.el

(defvar search-string-char-prompt "*Enter string... ")

(autoload (quote isearch-fep-string) "isearch-ext" "\
Read string from minibuffer for incremental search." t nil)

(autoload (quote isearch-fep-egg) "isearch-ext" "\
Read string for incremental search by using egg." t nil)

(autoload (quote isearch-fep-canna) "isearch-ext" "\
Read string for incremental search by using canna." t nil)

(autoload (quote isearch-fep-quail) "isearch-ext" "\
Read string for incremental search by using quail." t nil)

;;;***

;;;### (autoloads (iso-accents-mode) "iso-acc" "iso-acc.el" (12810 18245))
;;; Generated autoloads from iso-acc.el

(autoload (quote iso-accents-mode) "iso-acc" "\
Toggle ISO Accents mode, in which accents modify the following letter.
This permits easy insertion of accented characters according to ISO-8859-1.
When Iso-accents mode is enabled, accent character keys
\(`, ', \", ^, / and ~) do not self-insert; instead, they modify the following
letter key so that it inserts an ISO accented letter.

You can customize ISO Accents mode to a particular language
with the command `iso-accents-customize'.

Special combinations: ~c gives a c with cedilla,
~d gives an Icelandic eth (d with dash).
~t gives an Icelandic thorn.
\"s gives German sharp s.
/a gives a with ring.
/e gives an a-e ligature.
~< and ~> give guillemots.
~! gives an inverted exclamation mark.
~? gives an inverted question mark.

With an argument, a positive argument enables ISO Accents mode, 
and a negative argument disables it." t nil)

;;;***

;;;### (autoloads (ispell-message ispell-minor-mode ispell-complete-word-interior-frag ispell-complete-word ispell-continue ispell-buffer ispell-region ispell-change-dictionary ispell-kill-ispell ispell-help ispell-word) "ispell" "ispell.el" (12755 40305))
;;; Generated autoloads from ispell.el

(defvar ispell-personal-dictionary nil "\
*File name of your personal spelling dictionary, or nil.
If nil, the default personal dictionary, \"~/.ispell_DICTNAME\" is used,
where DICTNAME is the name of your default dictionary.")

(defvar ispell-dictionary-alist-1 (quote ((nil "[A-Za-z]" "[^A-Za-z]" "[']" nil ("-B") nil) ("english" "[A-Za-z]" "[^A-Za-z]" "[']" nil ("-B") nil) ("british" "[A-Za-z]" "[^A-Za-z]" "[']" nil ("-B" "-d" "british") nil) ("deutsch" "[a-zA-Z\"]" "[^a-zA-Z\"]" "[']" t ("-C") "~tex") ("deutsch8" "[a-zA-Z\304\326\334\344\366\337\374]" "[^a-zA-Z\304\326\334\344\366\337\374]" "[']" t ("-C" "-d" "deutsch") "~latin1") ("nederlands" "[A-Za-z\300-\305\307\310-\317\322-\326\331-\334\340-\345\347\350-\357\361\362-\366\371-\374]" "[^A-Za-z\300-\305\307\310-\317\322-\326\331-\334\340-\345\347\350-\357\361\362-\366\371-\374]" "[']" t ("-C") nil) ("nederlands8" "[A-Za-z\300-\305\307\310-\317\322-\326\331-\334\340-\345\347\350-\357\361\362-\366\371-\374]" "[^A-Za-z\300-\305\307\310-\317\322-\326\331-\334\340-\345\347\350-\357\361\362-\366\371-\374]" "[']" t ("-C") nil))))

(defvar ispell-dictionary-alist-2 (quote (("svenska" "[A-Za-z}{|\\133\\135\\\\]" "[^A-Za-z}{|\\133\\135\\\\]" "[']" nil ("-C") nil) ("svenska8" "[A-Za-z\345\344\366\305\304\366]" "[^A-Za-z\345\344\366\305\304\366]" "[']" nil ("-C" "-d" "svenska") "~list") ("francais7" "[A-Za-z]" "[^A-Za-z]" "[`'^---]" t nil nil) ("francais" "[A-Za-z\300\302\306\307\310\311\312\313\316\317\324\331\333\334\340\342\347\350\351\352\353\356\357\364\371\373\374]" "[^A-Za-z\300\302\306\307\310\311\312\313\316\317\324\331\333\334\340\342\347\350\351\352\353\356\357\364\371\373\374]" "[---']" t nil "~list") ("francais-tex" "[A-Za-z\300\302\306\307\310\311\312\313\316\317\324\331\333\334\340\342\347\350\351\352\353\356\357\364\371\373\374\\]" "[^A-Za-z\300\302\306\307\310\311\312\313\316\317\324\331\333\334\340\342\347\350\351\352\353\356\357\364\371\373\374\\]" "[---'^`\"]" t nil "~tex") ("dansk" "[A-Z\306\330\305a-z\346\370\345]" "[^A-Z\306\330\305a-z\346\370\345]" "" nil ("-C") nil))))

(defvar ispell-dictionary-alist (append ispell-dictionary-alist-1 ispell-dictionary-alist-2) "\
An alist of dictionaries and their associated parameters.

Each element of this list is also a list:

\(DICTIONARY-NAME CASECHARS NOT-CASECHARS OTHERCHARS MANY-OTHERCHARS-P
        ISPELL-ARGS EXTENDED-CHARACTER-MODE)

DICTIONARY-NAME is a possible value of variable `ispell-dictionary', nil
means the default dictionary.

CASECHARS is a regular expression of valid characters that comprise a
word.

NOT-CASECHARS is the opposite regexp of CASECHARS.

OTHERCHARS is a regular expression of other characters that are valid
in word constructs.  Otherchars cannot be adjacent to each other in a
word, nor can they begin or end a word.  This implies we can't check
\"Stevens'\" as a correct possessive and other correct formations.

Hint: regexp syntax requires the hyphen to be declared first here.

MANY-OTHERCHARS-P is non-nil if many otherchars are to be allowed in a
word instead of only one.

ISPELL-ARGS is a list of additional arguments passed to the ispell
subprocess.

EXTENDED-CHARACTER-MODE should be used when dictionaries are used which
have been configured in an Ispell affix file.  (For example, umlauts
can be encoded as \\\"a, a\\\", \"a, ...)  Defaults are ~tex and ~nroff
in English.  This has the same effect as the command-line `-T' option.
The buffer Major Mode controls Ispell's parsing in tex or nroff mode,
but the dictionary can control the extended character mode.
Both defaults can be overruled in a buffer-local fashion. See
`ispell-parsing-keyword' for details on this.

Note that the CASECHARS and OTHERCHARS slots of the alist should
contain the same character set as casechars and otherchars in the
language.aff file (e.g., english.aff).")

(defvar ispell-menu-map nil "\
Key map for ispell menu")

(defvar ispell-menu-lucid nil "\
Spelling menu for Lucid Emacs.")

(defconst ispell-menu-map-needed (and (not ispell-menu-map) (not (string-match "Lucid" emacs-version))))

(if ispell-menu-map-needed (let ((dicts (reverse (cons (cons "default" nil) ispell-dictionary-alist))) name) (setq ispell-menu-map (make-sparse-keymap "Spell")) (while dicts (setq name (car (car dicts)) dicts (cdr dicts)) (if (stringp name) (define-key ispell-menu-map (vector (intern name)) (cons (concat "Select " (capitalize name)) (list (quote lambda) nil (quote (interactive)) (list (quote ispell-change-dictionary) name))))))))

(if ispell-menu-map-needed (progn (define-key ispell-menu-map [ispell-change-dictionary] (quote ("Change Dictionary" . ispell-change-dictionary))) (define-key ispell-menu-map [ispell-kill-ispell] (quote ("Kill Process" . ispell-kill-ispell))) (define-key ispell-menu-map [ispell-pdict-save] (quote ("Save Dictionary" lambda nil (interactive) (ispell-pdict-save t t)))) (define-key ispell-menu-map [ispell-complete-word] (quote ("Complete Word" . ispell-complete-word))) (define-key ispell-menu-map [ispell-complete-word-interior-frag] (quote ("Complete Word Frag" . ispell-complete-word-interior-frag)))))

(if ispell-menu-map-needed (progn (define-key ispell-menu-map [ispell-continue] (quote ("Continue Check" . ispell-continue))) (define-key ispell-menu-map [ispell-word] (quote ("Check Word" . ispell-word))) (define-key ispell-menu-map [ispell-region] (quote ("Check Region" . ispell-region))) (define-key ispell-menu-map [ispell-buffer] (quote ("Check Buffer" . ispell-buffer)))))

(if ispell-menu-map-needed (progn (define-key ispell-menu-map [ispell-message] (quote ("Check Message" . ispell-message))) (define-key ispell-menu-map [ispell-help] (quote ("Help" lambda nil (interactive) (describe-function (quote ispell-help))))) (put (quote ispell-region) (quote menu-enable) (quote mark-active)) (fset (quote ispell-menu-map) (symbol-value (quote ispell-menu-map)))))

(define-key global-map "\244" (quote ispell-word))

(autoload (quote ispell-word) "ispell" "\
Check spelling of word under or before the cursor.
If the word is not found in dictionary, display possible corrections
in a window allowing you to choose one.

With a prefix argument (or if CONTINUE is non-nil),
resume interrupted spell-checking of a buffer or region.

If optional argument FOLLOWING is non-nil or if `ispell-following-word'
is non-nil when called interactively, then the following word
\(rather than preceding) is checked when the cursor is not over a word.
When the optional argument QUIETLY is non-nil or `ispell-quietly' is non-nil
when called interactively, non-corrective messages are suppressed.

Word syntax described by `ispell-dictionary-alist' (which see).

This will check or reload the dictionary.  Use \\[ispell-change-dictionary]
or \\[ispell-region] to update the Ispell process." t nil)

(autoload (quote ispell-help) "ispell" "\
Display a list of the options available when a misspelling is encountered.

Selections are:

DIGIT: Replace the word with a digit offered in the *Choices* buffer.
SPC:   Accept word this time.
`i':   Accept word and insert into private dictionary.
`a':   Accept word for this session.
`A':   Accept word and place in `buffer-local dictionary'.
`r':   Replace word with typed-in value.  Rechecked.
`R':   Replace word with typed-in value. Query-replaced in buffer. Rechecked.
`?':   Show these commands.
`x':   Exit spelling buffer.  Move cursor to original point.
`X':   Exit spelling buffer.  Leaves cursor at the current point, and permits
        the aborted check to be completed later.
`q':   Quit spelling session (Kills ispell process).
`l':   Look up typed-in replacement in alternate dictionary.  Wildcards okay.
`u':   Like `i', but the word is lower-cased first.
`m':   Like `i', but allows one to include dictionary completion information.
`C-l':  redraws screen
`C-r':  recursive edit
`C-z':  suspend emacs or iconify frame" nil nil)

(autoload (quote ispell-kill-ispell) "ispell" "\
Kill current Ispell process (so that you may start a fresh one).
With NO-ERROR, just return non-nil if there was no Ispell running." t nil)

(autoload (quote ispell-change-dictionary) "ispell" "\
Change `ispell-dictionary' (q.v.) and kill old Ispell process.
A new one will be started as soon as necessary.

By just answering RET you can find out what the current dictionary is.

With prefix argument, set the default directory." t nil)

(autoload (quote ispell-region) "ispell" "\
Interactively check a region for spelling errors." t nil)

(autoload (quote ispell-buffer) "ispell" "\
Check the current buffer for spelling errors interactively." t nil)

(autoload (quote ispell-continue) "ispell" nil t nil)

(autoload (quote ispell-complete-word) "ispell" "\
Look up word before or under point in dictionary (see lookup-words command)
and try to complete it.  If optional INTERIOR-FRAG is non-nil then the word
may be a character sequence inside of a word.

Standard ispell choices are then available." t nil)

(autoload (quote ispell-complete-word-interior-frag) "ispell" "\
Completes word matching character sequence inside a word." t nil)

(autoload (quote ispell-minor-mode) "ispell" "\
Toggle Ispell minor mode.
With prefix arg, turn Ispell minor mode on iff arg is positive.
 
In Ispell minor mode, pressing SPC or RET
warns you if the previous word is incorrectly spelled." t nil)

(autoload (quote ispell-message) "ispell" "\
Check the spelling of a mail message or news post.
Don't check spelling of message headers except the Subject field.
Don't check included messages.

To abort spell checking of a message region and send the message anyway,
use the `x' command.  (Any subsequent regions will be checked.)
The `X' command aborts the message send so that you can edit the buffer.

To spell-check whenever a message is sent, include the appropriate lines
in your .emacs file:
   (add-hook 'message-send-hook 'ispell-message)
   (add-hook 'mail-send-hook  'ispell-message)
   (add-hook 'mh-before-send-letter-hook 'ispell-message)

You can bind this to the key C-c i in GNUS or mail by adding to
`news-reply-mode-hook' or `mail-mode-hook' the following lambda expression:
   (function (lambda () (local-set-key \"\\C-ci\" 'ispell-message)))" t nil)

;;;***

;;;### (autoloads nil "jka-compr" "jka-compr.el" (12673 9361))
;;; Generated autoloads from jka-compr.el
(defun auto-compression-mode (&optional arg)
 "\
Toggle automatic file compression and uncompression.
With prefix argument ARG, turn auto compression on if positive, else off.
Returns the new status of auto compression (non-nil means on)."
 (interactive "P")
 (if (not (fboundp 'jka-compr-installed-p))
     (progn
       (require 'jka-compr)
       ;; That turned the mode on, so make it initially off.
       (toggle-auto-compression)))
 (toggle-auto-compression arg t))

;;;***

;;;### (autoloads (keyboard-isearch-mode-cleanup keyboard-isearch-mode-setup) "kbd-isearch" "kbd-isearch.el" (12489 9453))
;;; Generated autoloads from kbd-isearch.el

(autoload (quote keyboard-isearch-mode-setup) "kbd-isearch" nil nil nil)

(autoload (quote keyboard-isearch-mode-cleanup) "kbd-isearch" nil nil nil)

;;;***

;;;### (autoloads (set-keyboard-coding-system) "keyboard" "keyboard.el" (12373 632))
;;; Generated autoloads from keyboard.el

(defvar keyboard-allow-latin-input nil "\
If non-nil, \"ESC , Fe\" and \"ESC - Fe\" are used for inputting
Latin characters.")

(autoload (quote set-keyboard-coding-system) "keyboard" "\
Set variable keyboard-coding-system to CODE and modify keymap for it." t nil)

;;;***

;;;### (autoloads (kinsoku-shori-chizime kinsoku-shori-nobashi kinsoku-shori) "kinsoku" "kinsoku.el" (12271 28692))
;;; Generated autoloads from kinsoku.el

(defvar kinsoku-ascii t "\
Do kinsoku-shori for ASCII.")

(defvar kinsoku-jis t "\
Do kinsoku-shori for JISX0208.")

(defvar kinsoku-gb t "\
Do kinsoku-shori for GB2312.")

(defvar kinsoku-big5 t "\
Do kinsoku-shori for Big5..")

(autoload (quote kinsoku-shori) "kinsoku" "\
\222\266\330\222\302\247\222\244\313\222\277\250\222\244\354\222\244\312\222\244\244\222\305\300\222\244\330\222\260\334\222\306\260\222\244\271\222\244\353\222\241\243
point\222\244\254\222\271\324\222\306\254\222\266\330\222\302\247\222\244\313\222\277\250\222\244\354\222\244\353\222\276\354\222\271\347\222\244\317\222\271\324\222\244\362\222\277\255\222\244\320\222\244\267\222\244\306\222\241\242\222\266\330\222\302\247\222\244\313\222\277\250\222\244\354\222\244\312\222\244\244\222\305\300\222\244\362\222\303\265\222\244\271\222\241\243
point\222\244\254\222\271\324\222\313\366\222\266\330\222\302\247\222\244\313\222\277\250\222\244\354\222\244\353\222\276\354\222\271\347\222\244\317\222\271\324\222\244\362\222\275\314\222\244\341\222\244\306\222\241\242\222\266\330\222\302\247\222\244\313\222\277\250\222\244\354\222\244\312\222\244\244\222\305\300\222\244\362\222\303\265\222\244\271\222\241\243
\222\244\277\222\244\300\222\244\267\222\241\242\222\271\324\222\277\255\222\244\320\222\244\267\222\310\276\222\263\321\222\312\270\222\273\372\222\277\364\222\244\254kinsoku-nobashi-limit\222\244\362\222\261\333\222\244\250\222\244\353\222\244\310\222\241\242
\222\271\324\222\244\362\222\275\314\222\244\341\222\244\306\222\266\330\222\302\247\222\244\313\222\277\250\222\244\354\222\244\312\222\244\244\222\305\300\222\244\362\222\303\265\222\244\271\222\241\243" nil nil)

(autoload (quote kinsoku-shori-nobashi) "kinsoku" "\
\222\271\324\222\244\362\222\277\255\222\244\320\222\244\267\222\244\306\222\266\330\222\302\247\222\244\313\222\277\250\222\244\354\222\244\312\222\244\244\222\305\300\222\244\330\222\260\334\222\306\260\222\244\271\222\244\353\222\241\243" nil nil)

(autoload (quote kinsoku-shori-chizime) "kinsoku" "\
\222\271\324\222\244\362\222\275\314\222\244\341\222\244\306\222\266\330\222\302\247\222\244\313\222\277\250\222\244\354\222\244\312\222\244\244\222\305\300\222\244\330\222\260\334\222\306\260\222\244\271\222\244\353\222\241\243" nil nil)

;;;***

;;;### (autoloads (auto-compression-mode) "jka-compr" "jka-compr.el" (12437 52288))
;;; Generated autoloads from jka-compr.el

(autoload (quote auto-compression-mode) "jka-compr" "\
Toggle automatic file compression and uncompression.
With prefix argument ARG, turn auto compression on if positive, else off.
Returns the new status of auto compression (non-nil means on)." t nil)

;;;***
;;;### (autoloads (turn-on-lazy-lock lazy-lock-mode) "lazy-lock" "lazy-lock.el" (12750 18454))
;;; Generated autoloads from lazy-lock.el

(autoload (quote lazy-lock-mode) "lazy-lock" "\
Toggle Lazy Lock mode.
With arg, turn Lazy Lock mode on if and only if arg is positive.  Enable it
automatically in your `~/.emacs' by:

 (setq font-lock-support-mode 'lazy-lock-mode)

When Lazy Lock mode is enabled, fontification can be lazy in a number of ways:

 - Demand-driven buffer fontification if `lazy-lock-minimum-size' is non-nil.
   This means initial fontification does not occur if the buffer is greater
   than `lazy-lock-minimum-size' characters in length.  Instead, fontification
   occurs when necessary, such as when scrolling through the buffer would
   otherwise reveal unfontified areas.  This is useful if buffer fontification
   is too slow for large buffers.

 - Defer-driven buffer fontification if `lazy-lock-defer-driven' is non-nil.
   This means all fontification is deferred, such as fontification that occurs
   when scrolling through the buffer would otherwise reveal unfontified areas.
   Instead, these areas are seen momentarily unfontified.  This is useful if
   demand-driven fontification is too slow to keep up with scrolling.

 - Deferred on-the-fly fontification if `lazy-lock-defer-time' is non-nil.
   This means on-the-fly fontification does not occur as you type.  Instead,
   fontification is deferred until after `lazy-lock-defer-time' seconds of
   Emacs idle time, while Emacs remains idle.  This is useful if on-the-fly
   fontification is too slow to keep up with your typing.

 - Stealthy buffer fontification if `lazy-lock-stealth-time' is non-nil.
   This means remaining unfontified areas of buffers are fontified if Emacs has
   been idle for `lazy-lock-stealth-time' seconds, while Emacs remains idle.
   This is useful if any buffer has demand- or defer-driven fontification.

See also variables `lazy-lock-stealth-lines', `lazy-lock-stealth-nice' and
`lazy-lock-stealth-verbose' for stealth fontification.

Use \\[lazy-lock-submit-bug-report] to send bug reports or feedback." t nil)

(autoload (quote turn-on-lazy-lock) "lazy-lock" "\
Unconditionally turn on Lazy Lock mode." nil nil)

;;;***

;;;### (autoloads (ledit-from-lisp-mode ledit-mode) "ledit" "ledit.el" (12545 51698))
;;; Generated autoloads from ledit.el

(defconst ledit-save-files t "\
*Non-nil means Ledit should save files before transferring to Lisp.")

(defconst ledit-go-to-lisp-string "%?lisp" "\
*Shell commands to execute to resume Lisp job.")

(defconst ledit-go-to-liszt-string "%?liszt" "\
*Shell commands to execute to resume Lisp compiler job.")

(autoload (quote ledit-mode) "ledit" "\
\\<ledit-mode-map>Major mode for editing text and stuffing it to a Lisp job.
Like Lisp mode, plus these special commands:
  \\[ledit-save-defun]	-- record defun at or after point
	   for later transmission to Lisp job.
  \\[ledit-save-region] -- record region for later transmission to Lisp job.
  \\[ledit-go-to-lisp] -- transfer to Lisp job and transmit saved text.
  \\[ledit-go-to-liszt] -- transfer to Liszt (Lisp compiler) job
	   and transmit saved text.
\\{ledit-mode-map}
To make Lisp mode automatically change to Ledit mode,
do (setq lisp-mode-hook 'ledit-from-lisp-mode)" t nil)

(autoload (quote ledit-from-lisp-mode) "ledit" nil nil nil)

;;;***

;;;### (autoloads (life) "life" "life.el" (12545 51700))
;;; Generated autoloads from life.el

(autoload (quote life) "life" "\
Run Conway's Life simulation.
The starting pattern is randomly selected.  Prefix arg (optional first
arg non-nil from a program) is the number of seconds to sleep between
generations (this defaults to 1)." t nil)

;;;***

;;;### (autoloads (unload-feature) "loadhist" "loadhist.el" (12545 51712))
;;; Generated autoloads from loadhist.el

(autoload (quote unload-feature) "loadhist" "\
Unload the library that provided FEATURE, restoring all its autoloads.
If the feature is required by any other loaded code, and optional FORCE
is nil, raise an error." t nil)

;;;***

;;;### (autoloads (print-region lpr-region print-buffer lpr-buffer) "lpr" "lpr.el" (12545 51714))
;;; Generated autoloads from lpr.el

(defvar lpr-switches nil "\
*List of strings to pass as extra options for the printer program.
See `lpr-command'.")

(defvar lpr-command (if (memq system-type (quote (usg-unix-v dgux hpux irix))) "lp" "lpr") "\
*Name of program for printing a file.")

(autoload (quote lpr-buffer) "lpr" "\
Print buffer contents as with Unix command `lpr'.
`lpr-switches' is a list of extra switches (strings) to pass to lpr." t nil)

(autoload (quote print-buffer) "lpr" "\
Print buffer contents as with Unix command `lpr -p'.
`lpr-switches' is a list of extra switches (strings) to pass to lpr." t nil)

(autoload (quote lpr-region) "lpr" "\
Print region contents as with Unix command `lpr'.
`lpr-switches' is a list of extra switches (strings) to pass to lpr." t nil)

(autoload (quote print-region) "lpr" "\
Print region contents as with Unix command `lpr -p'.
`lpr-switches' is a list of extra switches (strings) to pass to lpr." t nil)

;;;***

;;;### (autoloads nil "ls-lisp" "ls-lisp.el" (12545 51714))
;;; Generated autoloads from ls-lisp.el

(defvar ls-lisp-support-shell-wildcards t "\
*Non-nil means file patterns are treated as shell wildcards.
nil means they are treated as Emacs regexps (for backward compatibility).
This variable is checked by \\[insert-directory] only when `ls-lisp.el'
package is used.")

;;;***

;;;### (autoloads (phases-of-moon) "lunar" "lunar.el" (12575 62938))
;;; Generated autoloads from lunar.el

(autoload (quote phases-of-moon) "lunar" "\
Display the quarters of the moon for last month, this month, and next month.
If called with an optional prefix argument, prompts for month and year.

This function is suitable for execution in a .emacs file." t nil)

;;;***

;;;### (autoloads (apply-macro-to-region-lines kbd-macro-query insert-kbd-macro name-last-kbd-macro) "macros" "macros.el" (12716 34333))
;;; Generated autoloads from macros.el

(autoload (quote name-last-kbd-macro) "macros" "\
Assign a name to the last keyboard macro defined.
Argument SYMBOL is the name to define.
The symbol's function definition becomes the keyboard macro string.
Such a \"function\" cannot be called from Lisp, but it is a valid editor command." t nil)

(autoload (quote insert-kbd-macro) "macros" "\
Insert in buffer the definition of kbd macro NAME, as Lisp code.
Optional second arg KEYS means also record the keys it is on
\(this is the prefix argument, when calling interactively).

This Lisp code will, when executed, define the kbd macro with the same
definition it has now.  If you say to record the keys, the Lisp code
will also rebind those keys to the macro.  Only global key bindings
are recorded since executing this Lisp code always makes global
bindings.

To save a kbd macro, visit a file of Lisp code such as your `~/.emacs',
use this command, and then save the file." t nil)

(autoload (quote kbd-macro-query) "macros" "\
Query user during kbd macro execution.
  With prefix argument, enters recursive edit, reading keyboard
commands even within a kbd macro.  You can give different commands
each time the macro executes.
  Without prefix argument, asks whether to continue running the macro.
Your options are: \\<query-replace-map>
\\[act]	Finish this iteration normally and continue with the next.
\\[skip]	Skip the rest of this iteration, and start the next.
\\[exit]	Stop the macro entirely right now.
\\[recenter]	Redisplay the screen, then ask again.
\\[edit]	Enter recursive edit; ask again when you exit from that." t nil)

(autoload (quote apply-macro-to-region-lines) "macros" "\
For each complete line between point and mark, move to the beginning
of the line, and run the last keyboard macro.

When called from lisp, this function takes two arguments TOP and
BOTTOM, describing the current region.  TOP must be before BOTTOM.
The optional third argument MACRO specifies a keyboard macro to
execute.

This is useful for quoting or unquoting included text, adding and
removing comments, or producing tables where the entries are regular.

For example, in Usenet articles, sections of text quoted from another
author are indented, or have each line start with `>'.  To quote a
section of text, define a keyboard macro which inserts `>', put point
and mark at opposite ends of the quoted section, and use
`\\[apply-macro-to-region-lines]' to mark the entire section.

Suppose you wanted to build a keyword table in C where each entry
looked like this:

    { \"foo\", foo_data, foo_function }, 
    { \"bar\", bar_data, bar_function },
    { \"baz\", baz_data, baz_function },

You could enter the names in this format:

    foo
    bar
    baz

and write a macro to massage a word into a table entry:

    \\C-x (
       \\M-d { \"\\C-y\", \\C-y_data, \\C-y_function },
    \\C-x )

and then select the region of un-tablified names and use
`\\[apply-macro-to-region-lines]' to build the table from the names.
" t nil)
 (define-key ctl-x-map "q" 'kbd-macro-query)

;;;***

;;;### (autoloads (what-domain mail-extract-address-components) "mail-extr" "mail-extr.el" (12752 13978))
;;; Generated autoloads from mail-extr.el

(autoload (quote mail-extract-address-components) "mail-extr" "\
Given an RFC-822 ADDRESS, extract full name and canonical address.
Returns a list of the form (FULL-NAME CANONICAL-ADDRESS).
If no name can be extracted, FULL-NAME will be nil.
ADDRESS may be a string or a buffer.  If it is a buffer, the visible 
 (narrowed) portion of the buffer will be interpreted as the address.
 (This feature exists so that the clever caller might be able to avoid
 consing a string.)
If ADDRESS contains more than one RFC-822 address, only the first is
 returned.  Some day this function may be extended to extract multiple
 addresses, or perhaps return the position at which parsing stopped." nil nil)

(autoload (quote what-domain) "mail-extr" "\
Convert mail domain DOMAIN to the country it corresponds to." t nil)

;;;***

;;;### (autoloads (mail-hist-put-headers-into-history mail-hist-enable mail-hist-define-keys) "mail-hist" "mail-hist.el" (12785 6028))
;;; Generated autoloads from mail-hist.el

(autoload (quote mail-hist-define-keys) "mail-hist" "\
Define keys for accessing mail header history.  For use in hooks." nil nil)

(autoload (quote mail-hist-enable) "mail-hist" nil nil nil)

(defvar mail-hist-keep-history t "\
*Non-nil means keep a history for headers and text of outgoing mail.")

(autoload (quote mail-hist-put-headers-into-history) "mail-hist" "\
Put headers and contents of this message into mail header history. 
Each header has its own independent history, as does the body of the
message.

This function normally would be called when the message is sent." nil nil)

;;;***

;;;### (autoloads (mail-fetch-field mail-file-babyl-p) "mail-utils" "mail-utils.el" (12765 6689))
;;; Generated autoloads from mail-utils.el

(defvar mail-use-rfc822 nil "\
*If non-nil, use a full, hairy RFC822 parser on mail addresses.
Otherwise, (the default) use a smaller, somewhat faster, and
often correct parser.")

(autoload (quote mail-file-babyl-p) "mail-utils" nil nil nil)

(autoload (quote mail-fetch-field) "mail-utils" "\
Return the value of the header field FIELD-NAME.
The buffer is expected to be narrowed to just the headers of the message.
If second arg LAST is non-nil, use the last such field if there are several.
If third arg ALL is non-nil, concatenate all such fields with commas between." nil nil)

;;;***

;;;### (autoloads (define-mail-abbrev build-mail-abbrevs mail-abbrevs-setup) "mailabbrev" "mailabbrev.el" (12715 6275))
;;; Generated autoloads from mailabbrev.el

(autoload (quote mail-abbrevs-setup) "mailabbrev" "\
Initialize use of the `mailabbrev' package." nil nil)

(autoload (quote build-mail-abbrevs) "mailabbrev" "\
Read mail aliases from personal mail alias file and set `mail-abbrevs'.
By default this is the file specified by `mail-personal-alias-file'." nil nil)

(autoload (quote define-mail-abbrev) "mailabbrev" "\
Define NAME as a mail alias abbrev that translates to DEFINITION.
If DEFINITION contains multiple addresses, separate them with commas." t nil)

;;;***

;;;### (autoloads (mail-complete define-mail-alias) "mailalias" "mailalias.el" (12750 25780))
;;; Generated autoloads from mailalias.el

(autoload (quote define-mail-alias) "mailalias" "\
Define NAME as a mail alias that translates to DEFINITION.
This means that sending a message to NAME will actually send to DEFINITION.

Normally, the addresses in DEFINITION must be separated by commas.
If FROM-MAILRC-FILE is non-nil, then addresses in DEFINITION 
can be separated by spaces; an address can contain spaces
if it is quoted with double-quotes." t nil)

(autoload (quote mail-complete) "mailalias" "\
Perform completion on header field or word preceding point.
Completable headers are according to `mail-complete-alist'.  If none matches
current header, calls `mail-complete-function' and passes prefix arg if any." t nil)

;;;***

;;;### (autoloads (makefile-mode) "make-mode" "make-mode.el" (12754 15556))
;;; Generated autoloads from make-mode.el

(autoload (quote makefile-mode) "make-mode" "\
Major mode for editing Makefiles.
This function ends by invoking the function(s) `makefile-mode-hook'.

\\{makefile-mode-map}

In the browser, use the following keys:

\\{makefile-browser-map}

Makefile mode can be configured by modifying the following variables:

makefile-browser-buffer-name:
    Name of the macro- and target browser buffer.

makefile-target-colon:
    The string that gets appended to all target names
    inserted by `makefile-insert-target'.
    \":\" or \"::\" are quite common values.

makefile-macro-assign:
   The string that gets appended to all macro names
   inserted by `makefile-insert-macro'.
   The normal value should be \" = \", since this is what
   standard make expects. However, newer makes such as dmake
   allow a larger variety of different macro assignments, so you
   might prefer to use \" += \" or \" := \" .

makefile-tab-after-target-colon:
   If you want a TAB (instead of a space) to be appended after the
   target colon, then set this to a non-nil value.

makefile-browser-leftmost-column:
   Number of blanks to the left of the browser selection mark.

makefile-browser-cursor-column:
   Column in which the cursor is positioned when it moves
   up or down in the browser.

makefile-browser-selected-mark:
   String used to mark selected entries in the browser.

makefile-browser-unselected-mark:
   String used to mark unselected entries in the browser.

makefile-browser-auto-advance-after-selection-p:
   If this variable is set to a non-nil value the cursor
   will automagically advance to the next line after an item
   has been selected in the browser.

makefile-pickup-everything-picks-up-filenames-p:
   If this variable is set to a non-nil value then
   `makefile-pickup-everything' also picks up filenames as targets
   (i.e. it calls `makefile-find-filenames-as-targets'), otherwise
   filenames are omitted.

makefile-cleanup-continuations-p:
   If this variable is set to a non-nil value then makefile-mode
   will assure that no line in the file ends with a backslash
   (the continuation character) followed by any whitespace.
   This is done by silently removing the trailing whitespace, leaving
   the backslash itself intact.
   IMPORTANT: Please note that enabling this option causes makefile-mode
   to MODIFY A FILE WITHOUT YOUR CONFIRMATION when \"it seems necessary\".

makefile-browser-hook:
   A function or list of functions to be called just before the
   browser is entered. This is executed in the makefile buffer.

makefile-special-targets-list:
   List of special targets. You will be offered to complete
   on one of those in the minibuffer whenever you enter a `.'.
   at the beginning of a line in Makefile mode." t nil)

;;;***

;;;### (autoloads (make-command-summary) "makesum" "makesum.el" (12545 51727))
;;; Generated autoloads from makesum.el

(autoload (quote make-command-summary) "makesum" "\
Make a summary of current key bindings in the buffer *Summary*.
Previous contents of that buffer are killed first." t nil)

;;;***

;;;### (autoloads (man) "man" "man.el" (12599 56964))
;;; Generated autoloads from man.el

(defalias (quote manual-entry) (quote man))

(autoload (quote man) "man" "\
Get a Un*x manual page and put it in a buffer.
This command is the top-level command in the man package.  It runs a Un*x
command to retrieve and clean a manpage in the background and places the
results in a Man mode (manpage browsing) buffer.  See variable
`Man-notify-method' for what happens when the buffer is ready.
If a buffer already exists for this man page, it will display immediately." t nil)

;;;***

;;;### (autoloads (unbold-region bold-region message-news-other-frame message-news-other-window message-mail-other-frame message-mail-other-window message-bounce message-resend message-forward message-recover message-supersede message-cancel-news message-followup message-wide-reply message-reply message-news message-mail message-mode) "message" "message.el" (12780 9694))
;;; Generated autoloads from message.el

(defvar message-fcc-handler-function (quote rmail-output) "\
*A function called to save outgoing articles.
This function will be called with the name of the file to store the
article in. The default function is `rmail-output' which saves in Unix
mailbox format.")

(defvar message-courtesy-message "The following message is a courtesy copy of an article\nthat has been posted as well.\n\n" "\
*This is inserted at the start of a mailed copy of a posted message.
If this variable is nil, no such courtesy message will be added.")

(defvar message-ignored-bounced-headers "^\\(Received\\|Return-Path\\):" "\
*Regexp that matches headers to be removed in resent bounced mail.")

(defvar message-from-style (quote default) "\
*Specifies how \"From\" headers look.

If `nil', they contain just the return address like:
	king@grassland.com
If `parens', they look like:
	king@grassland.com (Elvis Parsley)
If `angles', they look like:
	Elvis Parsley <king@grassland.com>

Otherwise, most addresses look like `angles', but they look like
`parens' if `angles' would need quoting and `parens' would not.")

(defvar message-syntax-checks nil "\
Controls what syntax checks should not be performed on outgoing posts.
To disable checking of long signatures, for instance, add
 `(signature . disabled)' to this list.

Don't touch this variable unless you really know what you're doing.

Checks include subject-cmsg multiple-headers sendsys message-id from
long-lines control-chars size new-text redirected-followup signature
approved sender empty empty-headers message-id from subject.")

(defvar message-required-news-headers (quote (From Newsgroups Subject Date Message-ID (optional . Organization) Lines (optional . X-Newsreader))) "\
*Headers to be generated or prompted for when posting an article.
RFC977 and RFC1036 require From, Date, Newsgroups, Subject,
Message-ID.  Organization, Lines, In-Reply-To, Expires, and
X-Newsreader are optional.  If don't you want message to insert some
header, remove it from this list.")

(defvar message-required-mail-headers (quote (From Subject Date (optional . In-Reply-To) Message-ID Lines (optional . X-Mailer))) "\
*Headers to be generated or prompted for when mailing a message.
RFC822 required that From, Date, To, Subject and Message-ID be
included.  Organization, Lines and X-Mailer are optional.")

(defvar message-deletable-headers (quote (Message-ID Date)) "\
*Headers to be deleted if they already exist and were generated by message previously.")

(defvar message-ignored-news-headers "^NNTP-Posting-Host:\\|^Xref:\\|^Bcc:\\|^Gcc:\\|^Fcc:" "\
*Regexp of headers to be removed unconditionally before posting.")

(defvar message-ignored-mail-headers "^Gcc:\\|^Fcc:" "\
*Regexp of headers to be removed unconditionally before mailing.")

(defvar message-ignored-supersedes-headers "^Path:\\|^Date\\|^NNTP-Posting-Host:\\|^Xref:\\|^Lines:\\|^Received:\\|^X-From-Line:\\|Return-Path:\\|^Supersedes:" "\
*Header lines matching this regexp will be deleted before posting.
It's best to delete old Path and Date headers before posting to avoid
any confusion.")

(defvar message-signature-separator "^-- *$" "\
Regexp matching the signature separator.")

(defvar message-interactive nil "\
Non-nil means when sending a message wait for and display errors.
nil means let mailer mail back a message to report errors.")

(defvar message-generate-new-buffers t "\
*Non-nil means that a new message buffer will be created whenever `mail-setup' is called.
If this is a function, call that function with three parameters:  The type,
the to address and the group name.  (Any of these may be nil.)  The function
should return the new buffer name.")

(defvar message-kill-buffer-on-exit nil "\
*Non-nil means that the message buffer will be killed after sending a message.")

(defvar message-user-organization-file "/usr/lib/news/organization" "\
*Local news organization file.")

(defvar message-signature-before-forwarded-message t "\
*If non-nil, put the signature before any included forwarded message.")

(defvar message-included-forward-headers "^From:\\|^Newsgroups:\\|^Subject:\\|^Date:\\|^Followup-To:\\|^Reply-To:\\|^Organization:\\|^Summary:\\|^Keywords:\\|^To:\\|^Cc:\\|^Posted-To:\\|^Mail-Copies-To:\\|^Apparently-To:\\|^Gnus-Warning:\\|^Resent-\\|^Message-ID:\\|^References:" "\
*Regexp matching headers to be included in forwarded messages.")

(defvar message-ignored-resent-headers "^Return-receipt" "\
*All headers that match this regexp will be deleted when resending a message.")

(defvar message-ignored-cited-headers "." "\
Delete these headers from the messages you yank.")

(defvar message-send-mail-function (quote message-send-mail-with-sendmail) "\
Function to call to send the current buffer as mail.
The headers should be delimited by a line whose contents match the
variable `mail-header-separator'.

Legal values include `message-send-mail-with-mh' and
`message-send-mail-with-sendmail', which is the default.")

(defvar message-send-news-function (quote message-send-news) "\
Function to call to send the current buffer as news.
The headers should be delimited by a line whose contents match the
variable `mail-header-separator'.")

(defvar message-reply-to-function nil "\
Function that should return a list of headers.
This function should pick out addresses from the To, Cc, and From headers
and respond with new To and Cc headers.")

(defvar message-wide-reply-to-function nil "\
Function that should return a list of headers.
This function should pick out addresses from the To, Cc, and From headers
and respond with new To and Cc headers.")

(defvar message-followup-to-function nil "\
Function that should return a list of headers.
This function should pick out addresses from the To, Cc, and From headers
and respond with new To and Cc headers.")

(defvar message-use-followup-to (quote ask) "\
*Specifies what to do with Followup-To header.
If nil, ignore the header. If it is t, use its value, but query before
using the \"poster\" value.  If it is the symbol `ask', query the user
whether to ignore the \"poster\" value.  If it is the symbol `use',
always use the value.")

(defvar message-post-method (cond ((and (boundp (quote gnus-post-method)) gnus-post-method) gnus-post-method) ((boundp (quote gnus-select-method)) gnus-select-method) (t (quote (nnspool "")))) "\
Method used to post news.")

(defvar message-generate-headers-first nil "\
*If non-nil, generate all possible headers before composing.")

(defvar message-citation-line-function (quote message-insert-citation-line) "\
*Function called to insert the \"Whomever writes:\" line.")

(defvar message-yank-prefix "> " "\
*Prefix inserted on the lines of yanked messages.
nil means use indentation.")

(defvar message-cite-function (quote message-cite-original) "\
*Function for citing an original message.")

(defvar message-indent-citation-function (quote message-indent-citation) "\
*Function for modifying a citation just inserted in the mail buffer.
This can also be a list of functions.  Each function can find the
citation between (point) and (mark t).  And each function should leave
point and mark around the citation text as modified.")

(defvar message-signature t "\
*String to be inserted at the end of the message buffer.
If t, the `message-signature-file' file will be inserted instead.
If a function, the result from the function will be used instead.
If a form, the result from the form will be used instead.")

(defvar message-signature-file "~/.signature" "\
*File containing the text inserted at end of message. buffer.")

(defvar message-default-headers nil "\
*A string containing header lines to be inserted in outgoing messages.
It is inserted before you edit the message, so you can edit or delete
these lines.")

(defvar message-default-mail-headers nil "\
*A string of header lines to be inserted in outgoing mails.")

(defvar message-default-news-headers nil "\
*A string of header lines to be inserted in outgoing news articles.")

(autoload (quote message-mode) "message" "\
Major mode for editing mail and news to be sent.
Like Text Mode but with these additional commands:
C-c C-s  message-send (send the message)    C-c C-c  message-send-and-exit
C-c C-f  move to a header field (and create it if there isn't):
	 C-c C-f C-t  move to To	C-c C-f C-s  move to Subject
	 C-c C-f C-c  move to Cc	C-c C-f C-b  move to Bcc
	 C-c C-f C-f  move to Fcc	C-c C-f C-r  move to Reply-To
	 C-c C-f C-u  move to Summary	C-c C-f C-n  move to Newsgroups
	 C-c C-f C-k  move to Keywords	C-c C-f C-d  move to Distribution
	 C-c C-f C-o  move to Followup-To
C-c C-t  message-insert-to (add a To header to a news followup)
C-c C-n  message-insert-newsgroups (add a Newsgroup header to a news reply)
C-c C-b  message-goto-body (move to beginning of message text).
C-c C-i  message-goto-signature (move to the beginning of the signature).
C-c C-w  message-insert-signature (insert `message-signature-file' file).
C-c C-y  message-yank-original (insert current message, if any).
C-c C-q  message-fill-yanked-message (fill what was yanked).
C-c C-r  message-ceasar-buffer-body (rot13 the message body)." t nil)

(autoload (quote message-mail) "message" "\
Start editing a mail message to be sent." t nil)

(autoload (quote message-news) "message" "\
Start editing a news article to be sent." t nil)

(autoload (quote message-reply) "message" "\
Start editing a reply to the article in the current buffer." t nil)

(autoload (quote message-wide-reply) "message" nil t nil)

(autoload (quote message-followup) "message" nil t nil)

(autoload (quote message-cancel-news) "message" "\
Cancel an article you posted." t nil)

(autoload (quote message-supersede) "message" "\
Start composing a message to supersede the current message.
This is done simply by taking the old article and adding a Supersedes
header line with the old Message-ID." t nil)

(autoload (quote message-recover) "message" "\
Reread contents of current buffer from its last auto-save file." t nil)

(autoload (quote message-forward) "message" "\
Forward the current message via mail.  
Optional NEWS will use news to forward instead of mail." t nil)

(autoload (quote message-resend) "message" "\
Resend the current article to ADDRESS." t nil)

(autoload (quote message-bounce) "message" "\
Re-mail the current message.
This only makes sense if the current message is a bounce message than
contains some mail you have written which has been bounced back to
you." t nil)

(autoload (quote message-mail-other-window) "message" "\
Like `message-mail' command, but display mail buffer in another window." t nil)

(autoload (quote message-mail-other-frame) "message" "\
Like `message-mail' command, but display mail buffer in another frame." t nil)

(autoload (quote message-news-other-window) "message" "\
Start editing a news article to be sent." t nil)

(autoload (quote message-news-other-frame) "message" "\
Start editing a news article to be sent." t nil)

(autoload (quote bold-region) "message" "\
Bold all nonblank characters in the region.
Works by overstriking characters.
Called from program, takes two arguments START and END
which specify the range to operate on." t nil)

(autoload (quote unbold-region) "message" "\
Remove all boldness (overstruck characters) in the region.
Called from program, takes two arguments START and END
which specify the range to operate on." t nil)

;;;***

;;;### (autoloads (metamail-region metamail-buffer metamail-interpret-body metamail-interpret-header) "metamail" "metamail.el" (12663 54771))
;;; Generated autoloads from metamail.el

(autoload (quote metamail-interpret-header) "metamail" "\
Interpret a header part of a MIME message in current buffer.
Its body part is not interpreted at all." t nil)

(autoload (quote metamail-interpret-body) "metamail" "\
Interpret a body part of a MIME message in current buffer.
Optional argument VIEWMODE specifies the value of the
EMACS_VIEW_MODE environment variable (defaulted to 1).
Optional argument NODISPLAY non-nil means buffer is not
redisplayed as output is inserted.
Its header part is not interpreted at all." t nil)

(autoload (quote metamail-buffer) "metamail" "\
Process current buffer through `metamail'.
Optional argument VIEWMODE specifies the value of the
EMACS_VIEW_MODE environment variable (defaulted to 1).
Optional argument BUFFER specifies a buffer to be filled (nil
means current).
Optional argument NODISPLAY non-nil means buffer is not
redisplayed as output is inserted." t nil)

(autoload (quote metamail-region) "metamail" "\
Process current region through 'metamail'.
Optional argument VIEWMODE specifies the value of the
EMACS_VIEW_MODE environment variable (defaulted to 1).
Optional argument BUFFER specifies a buffer to be filled (nil
means current).
Optional argument NODISPLAY non-nil means buffer is not
redisplayed as output is inserted." t nil)

;;;***

;;;### (autoloads (mh-letter-mode mh-smail-other-window mh-smail-batch mh-smail) "mh-comp" "mh-comp.el" (12536 45574))
;;; Generated autoloads from mh-comp.el

(autoload (quote mh-smail) "mh-comp" "\
Compose and send mail with the MH mail system.
This function is an entry point to mh-e, the Emacs front end
to the MH mail system.

See documentation of `\\[mh-send]' for more details on composing mail." t nil)

(autoload (quote mh-smail-batch) "mh-comp" "\
Set up a mail composition draft with the MH mail system.
This function is an entry point to mh-e, the Emacs front end
to the MH mail system.  This function does not prompt the user
for any header fields, and thus is suitable for use by programs
that want to create a mail buffer.
Users should use `\\[mh-smail]' to compose mail." nil nil)

(autoload (quote mh-smail-other-window) "mh-comp" "\
Compose and send mail in other window with the MH mail system.
This function is an entry point to mh-e, the Emacs front end
to the MH mail system.

See documentation of `\\[mh-send]' for more details on composing mail." t nil)

(autoload (quote mh-letter-mode) "mh-comp" "\
Mode for composing letters in mh-e.\\<mh-letter-mode-map>
When you have finished composing, type \\[mh-send-letter] to send the message
using the MH mail handling system.
See the documentation for \\[mh-edit-mhn] for information on composing MIME
messages.

\\{mh-letter-mode-map}

Variables controlling this mode (defaults in parentheses):

 mh-delete-yanked-msg-window (nil)
    If non-nil, \\[mh-yank-cur-msg] will delete any windows displaying
    the yanked message.

 mh-yank-from-start-of-msg (t)
    If non-nil, \\[mh-yank-cur-msg] will include the entire message.
    If `body', just yank the body (no header).
    If nil, only the portion of the message following the point will be yanked.
    If there is a region, this variable is ignored.

 mh-ins-buf-prefix (\"> \")
    String to insert before each non-blank line of a message as it is
    inserted in a draft letter.

 mh-signature-file-name (\"~/.signature\")
    File to be inserted into message by \\[mh-insert-signature].

Upon invoking mh-letter-mode, text-mode-hook and mh-letter-mode-hook are
invoked with no args, if those values are non-nil." t nil)

;;;***

;;;### (autoloads (mh-version mh-rmail) "mh-e" "mh-e.el" (12705 64721))
;;; Generated autoloads from mh-e.el

(autoload (quote mh-rmail) "mh-e" "\
Inc(orporate) new mail with MH, or, with arg, scan an MH mail folder.
This function is an entry point to mh-e, the Emacs front end
to the MH mail system." t nil)

(autoload (quote mh-version) "mh-e" "\
Display version information about mh-e and the MH mail handling system." t nil)

;;;***

;;;### (autoloads nil "mh-mime" "mh-mime.el" (12545 51739))
;;; Generated autoloads from mh-mime.el

(defvar mh-mime-content-types (quote (("text/plain") ("text/richtext") ("multipart/mixed") ("multipart/alternative") ("multipart/digest") ("multipart/parallel") ("message/rfc822") ("message/partial") ("message/external-body") ("application/octet-stream") ("application/postscript") ("image/jpeg") ("image/gif") ("audio/basic") ("video/mpeg"))) "\
Legal MIME content types.  See documentation for \\[mh-edit-mhn].")

;;;***

;;;### (autoloads nil "mh-utils" "mh-utils.el" (12755 33294))
;;; Generated autoloads from mh-utils.el

(put (quote mh-progs) (quote risky-local-variable) t)

(put (quote mh-lib) (quote risky-local-variable) t)

;;;***

;;;### (autoloads (convert-mocklisp-buffer) "mlconvert" "mlconvert.el" (12545 51744))
;;; Generated autoloads from mlconvert.el

(autoload (quote convert-mocklisp-buffer) "mlconvert" "\
Convert buffer of Mocklisp code to real Lisp that GNU Emacs can run." t nil)

;;;***

;;;### (autoloads (modula-2-mode) "modula2" "modula2.el" (12545 51746))
;;; Generated autoloads from modula2.el

(autoload (quote modula-2-mode) "modula2" "\
This is a mode intended to support program development in Modula-2.
All control constructs of Modula-2 can be reached by typing C-c
followed by the first character of the construct.
\\<m2-mode-map>
  \\[m2-begin] begin         \\[m2-case] case
  \\[m2-definition] definition    \\[m2-else] else
  \\[m2-for] for           \\[m2-header] header
  \\[m2-if] if            \\[m2-module] module
  \\[m2-loop] loop          \\[m2-or] or
  \\[m2-procedure] procedure     Control-c Control-w with
  \\[m2-record] record        \\[m2-stdio] stdio
  \\[m2-type] type          \\[m2-until] until
  \\[m2-var] var           \\[m2-while] while
  \\[m2-export] export        \\[m2-import] import
  \\[m2-begin-comment] begin-comment \\[m2-end-comment] end-comment
  \\[suspend-emacs] suspend Emacs     \\[m2-toggle] toggle
  \\[m2-compile] compile           \\[m2-next-error] next-error
  \\[m2-link] link

   `m2-indent' controls the number of spaces for each indentation.
   `m2-compile-command' holds the command to compile a Modula-2 program.
   `m2-link-command' holds the command to link a Modula-2 program." t nil)

;;;***

;;;### (autoloads (mpuz) "mpuz" "mpuz.el" (12545 51751))
;;; Generated autoloads from mpuz.el

(autoload (quote mpuz) "mpuz" "\
Multiplication puzzle with GNU Emacs." t nil)

;;;***

;;;### (autoloads (dump-CODINGS dump-charset mule-diag list-fontset describe-fontset list-font describe-font list-coding-system list-coding-system-briefly describe-coding-system list-character-sets) "mule-diag" "mule-diag.el" (12371 64253))
;;; Generated autoloads from mule-diag.el

(autoload (quote list-character-sets) "mule-diag" "\
Display a list of existing character sets." t nil)

(autoload (quote describe-coding-system) "mule-diag" "\
Display documentation of the coding-system CODE." t nil)

(autoload (quote list-coding-system-briefly) "mule-diag" "\
Display coding-systems currently used with a brief format in mini-buffer." t nil)

(autoload (quote list-coding-system) "mule-diag" "\
Describe coding-systems currently used with a detailed format.
If optional arg ALL is non-nil, all coding-systems are listed in
machine readable simple format." t nil)

(autoload (quote describe-font) "mule-diag" "\
Display information about fonts which partially match FONTNAME." t nil)

(autoload (quote list-font) "mule-diag" "\
Display a list of fonts." t nil)

(autoload (quote describe-fontset) "mule-diag" "\
Display information about FONTSET." t nil)

(autoload (quote list-fontset) "mule-diag" "\
Display a list of fontsets." t nil)

(autoload (quote mule-diag) "mule-diag" "\
Show diagnosis of the current running Mule." t nil)

(autoload (quote dump-charset) "mule-diag" nil nil nil)

(autoload (quote dump-CODINGS) "mule-diag" nil nil nil)

;;;***

;;;### (autoloads (nnfolder-generate-active-file) "nnfolder" "nnfolder.el" (12756 29868))
;;; Generated autoloads from nnfolder.el

(autoload (quote nnfolder-generate-active-file) "nnfolder" "\
Look for mbox folders in the nnfolder directory and make them into groups." t nil)

;;;***

;;;### (autoloads (nnkiboze-generate-groups) "nnkiboze" "nnkiboze.el" (12752 26144))
;;; Generated autoloads from nnkiboze.el

(autoload (quote nnkiboze-generate-groups) "nnkiboze" "\
Usage: emacs -batch -l nnkiboze -f nnkiboze-generate-groups
Finds out what articles are to be part of the nnkiboze groups." t nil)

;;;***

;;;### (autoloads (nnml-generate-nov-databases) "nnml" "nnml.el" (12756 29670))
;;; Generated autoloads from nnml.el

(autoload (quote nnml-generate-nov-databases) "nnml" "\
Generate nov databases in all nnml directories." t nil)

;;;***

;;;### (autoloads (nnsoup-revert-variables nnsoup-set-variables nnsoup-pack-replies) "nnsoup" "nnsoup.el" (12752 26882))
;;; Generated autoloads from nnsoup.el

(autoload (quote nnsoup-pack-replies) "nnsoup" "\
Make an outbound package of SOUP replies." t nil)

(autoload (quote nnsoup-set-variables) "nnsoup" "\
Use the SOUP methods for posting news and mailing mail." t nil)

(autoload (quote nnsoup-revert-variables) "nnsoup" "\
Revert posting and mailing methods to the standard Emacs methods." t nil)

;;;***

;;;### (autoloads (disable-command enable-command disabled-command-hook) "novice" "novice.el" (12545 51771))
;;; Generated autoloads from novice.el

(setq disabled-command-hook (quote disabled-command-hook))

(autoload (quote disabled-command-hook) "novice" nil nil nil)

(autoload (quote enable-command) "novice" "\
Allow COMMAND to be executed without special confirmation from now on.
The user's .emacs file is altered so that this will apply
to future sessions." t nil)

(autoload (quote disable-command) "novice" "\
Require special confirmation to execute COMMAND from now on.
The user's .emacs file is altered so that this will apply
to future sessions." t nil)

;;;***

;;;### (autoloads (nroff-mode) "nroff-mode" "nroff-mode.el" (12545 51772))
;;; Generated autoloads from nroff-mode.el

(autoload (quote nroff-mode) "nroff-mode" "\
Major mode for editing text intended for nroff to format.
\\{nroff-mode-map}
Turning on Nroff mode runs `text-mode-hook', then `nroff-mode-hook'.
Also, try `nroff-electric-mode', for automatically inserting
closing requests for requests that are used in matched pairs." t nil)

;;;***

;;;### (autoloads (edit-options list-options) "options" "options.el" (12545 51773))
;;; Generated autoloads from options.el

(autoload (quote list-options) "options" "\
Display a list of Emacs user options, with values and documentation." t nil)

(autoload (quote edit-options) "options" "\
Edit a list of Emacs user option values.
Selects a buffer containing such a list,
in which there are commands to set the option values.
Type \\[describe-mode] in that buffer for a list of commands." t nil)

;;;***

;;;### (autoloads (outline-minor-mode outline-mode) "outline" "outline.el" (12546 1888))
;;; Generated autoloads from outline.el

(autoload (quote outline-mode) "outline" "\
Set major mode for editing outlines with selective display.
Headings are lines which start with asterisks: one for major headings,
two for subheadings, etc.  Lines not starting with asterisks are body lines. 

Body text or subheadings under a heading can be made temporarily
invisible, or visible again.  Invisible lines are attached to the end 
of the heading, so they move with it, if the line is killed and yanked
back.  A heading with text hidden under it is marked with an ellipsis (...).

Commands:\\<outline-mode-map>
\\[outline-next-visible-heading]   outline-next-visible-heading      move by visible headings
\\[outline-previous-visible-heading]   outline-previous-visible-heading
\\[outline-forward-same-level]   outline-forward-same-level        similar but skip subheadings
\\[outline-backward-same-level]   outline-backward-same-level
\\[outline-up-heading]   outline-up-heading		    move from subheading to heading

\\[hide-body]	make all text invisible (not headings).
\\[show-all]	make everything in buffer visible.

The remaining commands are used when point is on a heading line.
They apply to some of the body or subheadings of that heading.
\\[hide-subtree]   hide-subtree	make body and subheadings invisible.
\\[show-subtree]   show-subtree	make body and subheadings visible.
\\[show-children]   show-children	make direct subheadings visible.
		 No effect on body, or subheadings 2 or more levels down.
		 With arg N, affects subheadings N levels down.
\\[hide-entry]	   make immediately following body invisible.
\\[show-entry]	   make it visible.
\\[hide-leaves]	   make body under heading and under its subheadings invisible.
		     The subheadings remain visible.
\\[show-branches]  make all subheadings at all levels visible.

The variable `outline-regexp' can be changed to control what is a heading.
A line is a heading if `outline-regexp' matches something at the
beginning of the line.  The longer the match, the deeper the level.

Turning on outline mode calls the value of `text-mode-hook' and then of
`outline-mode-hook', if they are non-nil." t nil)

(autoload (quote outline-minor-mode) "outline" "\
Toggle Outline minor mode.
With arg, turn Outline minor mode on if arg is positive, off otherwise.
See the command `outline-mode' for more information on this mode." t nil)

;;;***

;;;### (autoloads (show-paren-mode) "paren" "paren.el" (12605 9129))
;;; Generated autoloads from paren.el

(autoload (quote show-paren-mode) "paren" "\
Toggle Show Paren mode.
With prefix ARG, turn Show Paren mode on if and only if ARG is positive.
Returns the new status of Show Paren mode (non-nil means on).

When Show Paren mode is enabled, any matching parenthesis is highlighted
after `show-paren-delay' seconds of Emacs idle time." t nil)

;;;***

;;;### (autoloads (pascal-mode) "pascal" "pascal.el" (12695 25037))
;;; Generated autoloads from pascal.el

(autoload (quote pascal-mode) "pascal" "\
Major mode for editing Pascal code. \\<pascal-mode-map>
TAB indents for Pascal code.  Delete converts tabs to spaces as it moves back.

\\[pascal-complete-word] completes the word around current point with respect to position in code
\\[pascal-show-completions] shows all possible completions at this point.

Other useful functions are:

\\[pascal-mark-defun]	- Mark function.
\\[pascal-insert-block]	- insert begin ... end;
\\[pascal-star-comment]	- insert (* ... *)
\\[pascal-comment-area]	- Put marked area in a comment, fixing nested comments.
\\[pascal-uncomment-area]	- Uncomment an area commented with \\[pascal-comment-area].
\\[pascal-beg-of-defun]	- Move to beginning of current function.
\\[pascal-end-of-defun]	- Move to end of current function.
\\[pascal-goto-defun]	- Goto function prompted for in the minibuffer.
\\[pascal-outline]	- Enter pascal-outline-mode (see also pascal-outline).

Variables controlling indentation/edit style:

 pascal-indent-level      (default 3)
    Indentation of Pascal statements with respect to containing block.
 pascal-case-indent       (default 2)
    Indentation for case statements.
 pascal-auto-newline      (default nil)
    Non-nil means automatically newline after semicolons and the punctuation
    mark after an end.
 pascal-tab-always-indent (default t)
    Non-nil means TAB in Pascal mode should always reindent the current line,
    regardless of where in the line point is when the TAB command is used.
 pascal-auto-endcomments  (default t)
    Non-nil means a comment { ... } is set after the ends which ends cases and
    functions. The name of the function or case will be set between the braces.
 pascal-auto-lineup       (default t)
    List of contexts where auto lineup of :'s or ='s hould be done.

See also the user variables pascal-type-keywords, pascal-start-keywords and
pascal-separator-keywords.

Turning on Pascal mode calls the value of the variable pascal-mode-hook with
no args, if that value is non-nil." t nil)

;;;***

;;;### (autoloads (pc-bindings-mode) "pc-mode" "pc-mode.el" (12704 56926))
;;; Generated autoloads from pc-mode.el

(autoload (quote pc-bindings-mode) "pc-mode" "\
Set up certain key bindings for PC compatibility.
The keys affected are:
Delete (and its variants) delete forward instead of backward.
C-Backspace kills backward a word (as C-Delete normally would).
M-Backspace does undo.
Home and End move to beginning and end of line
C-Home and C-End move to beginning and end of buffer.
C-Escape does list-buffers." t nil)

;;;***

;;;### (autoloads (pc-selection-mode) "pc-select" "pc-select.el" (12599 57094))
;;; Generated autoloads from pc-select.el

(autoload (quote pc-selection-mode) "pc-select" "\
Change mark behaviour to emulate motif, MAC or MS-Windows cut and paste style.

This mode will switch on delete-selection-mode and
transient-mark-mode.

The cursor keys (and others) are bound to new functions
which will modify the status of the mark. It will be
possible to select regions with shift-cursorkeys. All this
tries to emulate the look-and-feel of GUIs like motif,
the MAC GUI or MS-Windows (sorry for the last one)." t nil)

;;;***

;;;### (autoloads (perl-mode) "perl-mode" "perl-mode.el" (12587 31317))
;;; Generated autoloads from perl-mode.el

(autoload (quote perl-mode) "perl-mode" "\
Major mode for editing Perl code.
Expression and list commands understand all Perl brackets.
Tab indents for Perl code.
Comments are delimited with # ... \\n.
Paragraphs are separated by blank lines only.
Delete converts tabs to spaces as it moves back.
\\{perl-mode-map}
Variables controlling indentation style:
 perl-tab-always-indent
    Non-nil means TAB in Perl mode should always indent the current line,
    regardless of where in the line point is when the TAB command is used.
 perl-tab-to-comment
    Non-nil means that for lines which don't need indenting, TAB will
    either delete an empty comment, indent an existing comment, move 
    to end-of-line, or if at end-of-line already, create a new comment.
 perl-nochange
    Lines starting with this regular expression are not auto-indented.
 perl-indent-level
    Indentation of Perl statements within surrounding block.
    The surrounding block's indentation is the indentation
    of the line on which the open-brace appears.
 perl-continued-statement-offset
    Extra indentation given to a substatement, such as the
    then-clause of an if or body of a while.
 perl-continued-brace-offset
    Extra indentation given to a brace that starts a substatement.
    This is in addition to `perl-continued-statement-offset'.
 perl-brace-offset
    Extra indentation for line if it starts with an open brace.
 perl-brace-imaginary-offset
    An open brace following other text is treated as if it were
    this far to the right of the start of its line.
 perl-label-offset
    Extra indentation for line that is a label.

Various indentation styles:       K&R  BSD  BLK  GNU  LW
  perl-indent-level                5    8    0    2    4
  perl-continued-statement-offset  5    8    4    2    4
  perl-continued-brace-offset      0    0    0    0   -4
  perl-brace-offset               -5   -8    0    0    0
  perl-brace-imaginary-offset      0    0    4    0    0
  perl-label-offset               -5   -8   -2   -2   -2

Turning on Perl mode runs the normal hook `perl-mode-hook'." t nil)

;;;***

;;;### (autoloads (picture-mode) "picture" "picture.el" (12578 16858))
;;; Generated autoloads from picture.el

(autoload (quote picture-mode) "picture" "\
Switch to Picture mode, in which a quarter-plane screen model is used.
Printing characters replace instead of inserting themselves with motion
afterwards settable by these commands:
  C-c <	  Move left after insertion.
  C-c >	  Move right after insertion.
  C-c ^	  Move up after insertion.
  C-c .	  Move down after insertion.
  C-c `	  Move northwest (nw) after insertion.
  C-c '	  Move northeast (ne) after insertion.
  C-c /	  Move southwest (sw) after insertion.
  C-c \\   Move southeast (se) after insertion.
The current direction is displayed in the mode line.  The initial
direction is right.  Whitespace is inserted and tabs are changed to
spaces when required by movement.  You can move around in the buffer
with these commands:
  \\[picture-move-down]	  Move vertically to SAME column in previous line.
  \\[picture-move-up]	  Move vertically to SAME column in next line.
  \\[picture-end-of-line]	  Move to column following last non-whitespace character.
  \\[picture-forward-column]	  Move right inserting spaces if required.
  \\[picture-backward-column]	  Move left changing tabs to spaces if required.
  C-c C-f Move in direction of current picture motion.
  C-c C-b Move in opposite direction of current picture motion.
  Return  Move to beginning of next line.
You can edit tabular text with these commands:
  M-Tab	  Move to column beneath (or at) next interesting character.
	    `Indents' relative to a previous line.
  Tab	  Move to next stop in tab stop list.
  C-c Tab Set tab stops according to context of this line.
	    With ARG resets tab stops to default (global) value.
	    See also documentation of variable	picture-tab-chars
	    which defines \"interesting character\".  You can manually
	    change the tab stop list with command \\[edit-tab-stops].
You can manipulate text with these commands:
  C-d	  Clear (replace) ARG columns after point without moving.
  C-c C-d Delete char at point - the command normally assigned to C-d.
  \\[picture-backward-clear-column]  Clear (replace) ARG columns before point, moving back over them.
  \\[picture-clear-line]	  Clear ARG lines, advancing over them.	 The cleared
	    text is saved in the kill ring.
  \\[picture-open-line]	  Open blank line(s) beneath current line.
You can manipulate rectangles with these commands:
  C-c C-k Clear (or kill) a rectangle and save it.
  C-c C-w Like C-c C-k except rectangle is saved in named register.
  C-c C-y Overlay (or insert) currently saved rectangle at point.
  C-c C-x Like C-c C-y except rectangle is taken from named register.
  \\[copy-rectangle-to-register]   Copies a rectangle to a register.
  \\[advertised-undo]   Can undo effects of rectangle overlay commands
	    commands if invoked soon enough.
You can return to the previous mode with:
  C-c C-c Which also strips trailing whitespace from every line.
	    Stripping is suppressed by supplying an argument.

Entry to this mode calls the value of  picture-mode-hook  if non-nil.

Note that Picture mode commands will work outside of Picture mode, but
they are not defaultly assigned to keys." t nil)

(defalias (quote edit-picture) (quote picture-mode))

;;;***

;;;### (autoloads (pp-eval-last-sexp pp-eval-expression pp) "pp" "pp.el" (12742 53103))
;;; Generated autoloads from pp.el

(autoload (quote pp) "pp" "\
Output the pretty-printed representation of OBJECT, any Lisp object.
Quoting characters are printed when needed to make output that `read'
can handle, whenever this is possible.
Output stream is STREAM, or value of `standard-output' (which see)." nil nil)

(autoload (quote pp-eval-expression) "pp" "\
Evaluate EXPRESSION and pretty-print value into a new display buffer.
If the pretty-printed value fits on one line, the message line is used
instead.  Value is also consed on to front of variable  values 's
value." t nil)

(autoload (quote pp-eval-last-sexp) "pp" "\
Run `pp-eval-expression' on sexp before point (which see).
With argument, pretty-print output into current buffer.
Ignores leading comment characters." t nil)

;;;***

;;;### (autoloads (run-prolog prolog-mode) "prolog" "prolog.el" (12545 51788))
;;; Generated autoloads from prolog.el

(autoload (quote prolog-mode) "prolog" "\
Major mode for editing Prolog code for Prologs.
Blank lines and `%%...' separate paragraphs.  `%'s start comments.
Commands:
\\{prolog-mode-map}
Entry to this mode calls the value of `prolog-mode-hook'
if that value is non-nil." t nil)

(autoload (quote run-prolog) "prolog" "\
Run an inferior Prolog process, input and output via buffer *prolog*." t nil)

;;;***

;;;### (autoloads (ps-despool ps-spool-region-with-faces ps-spool-region ps-spool-buffer-with-faces ps-spool-buffer ps-print-region-with-faces ps-print-region ps-print-buffer-with-faces ps-print-buffer) "ps-print" "ps-print.el" (12787 44357))
;;; Generated autoloads from ps-print.el

(autoload (quote ps-print-buffer) "ps-print" "\
Generate and print a PostScript image of the buffer.

When called with a numeric prefix argument (C-u), prompts the user for
the name of a file to save the PostScript image in, instead of sending
it to the printer.

More specifically, the FILENAME argument is treated as follows: if it
is nil, send the image to the printer.  If FILENAME is a string, save
the PostScript image in a file with that name.  If FILENAME is a
number, prompt the user for the name of the file to save in." t nil)

(autoload (quote ps-print-buffer-with-faces) "ps-print" "\
Generate and print a PostScript image of the buffer.
Like `ps-print-buffer', but includes font, color, and underline
information in the generated image.  This command works only if you
are using a window system, so it has a way to determine color values." t nil)

(autoload (quote ps-print-region) "ps-print" "\
Generate and print a PostScript image of the region.
Like `ps-print-buffer', but prints just the current region." t nil)

(autoload (quote ps-print-region-with-faces) "ps-print" "\
Generate and print a PostScript image of the region.
Like `ps-print-region', but includes font, color, and underline
information in the generated image.  This command works only if you
are using a window system, so it has a way to determine color values." t nil)

(autoload (quote ps-spool-buffer) "ps-print" "\
Generate and spool a PostScript image of the buffer.
Like `ps-print-buffer' except that the PostScript image is saved in a
local buffer to be sent to the printer later.

Use the command `ps-despool' to send the spooled images to the printer." t nil)

(autoload (quote ps-spool-buffer-with-faces) "ps-print" "\
Generate and spool a PostScript image of the buffer.
Like `ps-spool-buffer', but includes font, color, and underline
information in the generated image.  This command works only if you
are using a window system, so it has a way to determine color values.

Use the command `ps-despool' to send the spooled images to the printer." t nil)

(autoload (quote ps-spool-region) "ps-print" "\
Generate a PostScript image of the region and spool locally.
Like `ps-spool-buffer', but spools just the current region.

Use the command `ps-despool' to send the spooled images to the printer." t nil)

(autoload (quote ps-spool-region-with-faces) "ps-print" "\
Generate a PostScript image of the region and spool locally.
Like `ps-spool-region', but includes font, color, and underline
information in the generated image.  This command works only if you
are using a window system, so it has a way to determine color values.

Use the command `ps-despool' to send the spooled images to the printer." t nil)

(autoload (quote ps-despool) "ps-print" "\
Send the spooled PostScript to the printer.

When called with a numeric prefix argument (C-u), prompt the user for
the name of a file to save the spooled PostScript in, instead of sending
it to the printer.

More specifically, the FILENAME argument is treated as follows: if it
is nil, send the image to the printer.  If FILENAME is a string, save
the PostScript image in a file with that name.  If FILENAME is a
number, prompt the user for the name of the file to save in." t nil)

;;;***

;;;### (autoloads (quail-mode quail-use-package) "quail" "quail.el" (12371 64300))
;;; Generated autoloads from quail.el

(defconst quail-version "2.2")

(defvar quail-package-alist nil "\
Assoc list of quail-packages.  Each element is a list of:
  NAME, PROMPT, MAP, GUIDANCE, DOC, SUB-MODE-MAP, NOLEARN, DETERMINISTIC,
  TRANSLATE, LAYOUT, OBSOLETE, DECODE-MAP, and EXTRA-MODE-LIST.
See the document of `quail-define-package' for more detail.")
(make-obsolete 'quail-showkey 'quail-guidance)
(make-obsolete 'quail-dynamic-list 'quail-guidance)

(defvar quail-current-package nil "\
Current quail-pacakge.")

(make-variable-buffer-local (quote quail-current-package))

(autoload (quote quail-use-package) "quail" "\
Set current quail package to NAME." nil nil)

(autoload (quote quail-mode) "quail" "\
Toggle Quail minor mode.
With arg, turn Quail mode on if and only if arg is positive.
The command key you can use in Quail mode depends on a quail package.
Try \\[describe-bindings] in quail-mode.
The description about the current quail package is shown by \\[quail-help]." t nil)

(global-set-key "" (quote quail-mode))

;;;***

;;;### (autoloads (remote-compile) "rcompile" "rcompile.el" (12545 51791))
;;; Generated autoloads from rcompile.el

(autoload (quote remote-compile) "rcompile" "\
Compile the the current buffer's directory on HOST.  Log in as USER.
See \\[compile]." t nil)

;;;***

;;;### (autoloads (clear-rectangle string-rectangle open-rectangle insert-rectangle yank-rectangle kill-rectangle extract-rectangle delete-extract-rectangle delete-rectangle) "rect" "rect.el" (12546 1891))
;;; Generated autoloads from rect.el

(autoload (quote delete-rectangle) "rect" "\
Delete (don't save) text in rectangle with point and mark as corners.
The same range of columns is deleted in each line starting with the line
where the region begins and ending with the line where the region ends." t nil)

(autoload (quote delete-extract-rectangle) "rect" "\
Delete contents of rectangle and return it as a list of strings.
Arguments START and END are the corners of the rectangle.
The value is list of strings, one for each line of the rectangle." nil nil)

(autoload (quote extract-rectangle) "rect" "\
Return contents of rectangle with corners at START and END.
Value is list of strings, one for each line of the rectangle." nil nil)

(autoload (quote kill-rectangle) "rect" "\
Delete rectangle with corners at point and mark; save as last killed one.
Calling from program, supply two args START and END, buffer positions.
But in programs you might prefer to use `delete-extract-rectangle'." t nil)

(autoload (quote yank-rectangle) "rect" "\
Yank the last killed rectangle with upper left corner at point." t nil)

(autoload (quote insert-rectangle) "rect" "\
Insert text of RECTANGLE with upper left corner at point.
RECTANGLE's first line is inserted at point, its second
line is inserted at a point vertically under point, etc.
RECTANGLE should be a list of strings.
After this command, the mark is at the upper left corner
and point is at the lower right corner." nil nil)

(autoload (quote open-rectangle) "rect" "\
Blank out rectangle with corners at point and mark, shifting text right.
The text previously in the region is not overwritten by the blanks,
but instead winds up to the right of the rectangle." t nil)

(autoload (quote string-rectangle) "rect" "\
Insert STRING on each line of the region-rectangle, shifting text right.
The left edge of the rectangle specifies the column for insertion.
This command does not delete or overwrite any existing text.

Called from a program, takes three args; START, END and STRING." t nil)

(autoload (quote clear-rectangle) "rect" "\
Blank out rectangle with corners at point and mark.
The text previously in the region is overwritten by the blanks.
When called from a program, requires two args which specify the corners." t nil)

;;;***

;;;### (autoloads (reporter-submit-bug-report) "reporter" "reporter.el" (12761 52437))
;;; Generated autoloads from reporter.el

(defvar mail-user-agent (quote sendmail-user-agent) "\
*Your preference for a mail composition package.
Various Emacs Lisp packages (e.g. reporter) require you to compose an
outgoing email message.  As there are several such packages available
for Emacs, you can indicate your preference by setting this variable.

Valid values currently are:

    'sendmail-user-agent -- use Emacs built-in Mail package
    'vm-user-agent       -- use Kyle Jones' VM package
    'mh-e-user-agent     -- use the Emacs interface to the MH mail system

Additional valid symbols may be available; check with the author of
your package for details.")

(autoload (quote reporter-submit-bug-report) "reporter" nil nil nil)

;;;***

;;;### (autoloads (reposition-window) "reposition" "reposition.el" (12545 51799))
;;; Generated autoloads from reposition.el

(autoload (quote reposition-window) "reposition" "\
Make the current definition and/or comment visible.
Further invocations move it to the top of the window or toggle the
visibility of comments that precede it.
  Point is left unchanged unless prefix ARG is supplied.
  If the definition is fully onscreen, it is moved to the top of the
window.  If it is partly offscreen, the window is scrolled to get the
definition (or as much as will fit) onscreen, unless point is in a comment
which is also partly offscreen, in which case the scrolling attempts to get
as much of the comment onscreen as possible.
  Initially `reposition-window' attempts to make both the definition and
preceding comments visible.  Further invocations toggle the visibility of
the comment lines.
  If ARG is non-nil, point may move in order to make the whole defun
visible (if only part could otherwise be made so), to make the defun line
visible (if point is in code and it could not be made so, or if only
comments, including the first comment line, are visible), or to make the
first comment line visible (if point is in a comment)." t nil)
 (define-key esc-map "\C-l" 'reposition-window)

;;;***

;;;### (autoloads (resume-suspend-hook) "resume" "resume.el" (12679 50658))
;;; Generated autoloads from resume.el

(autoload (quote resume-suspend-hook) "resume" "\
Clear out the file used for transmitting args when Emacs resumes." nil nil)

;;;***

;;;### (autoloads (make-ring ring-p) "ring" "ring.el" (12545 51802))
;;; Generated autoloads from ring.el

(autoload (quote ring-p) "ring" "\
Returns t if X is a ring; nil otherwise." nil nil)

(autoload (quote make-ring) "ring" "\
Make a ring that can contain SIZE elements." nil nil)

;;;***

;;;### (autoloads (rlogin) "rlogin" "rlogin.el" (12748 51349))
;;; Generated autoloads from rlogin.el
 (add-hook 'same-window-regexps "^\\*rlogin-.*\\*\\(\\|<[0-9]+>\\)")

(autoload (quote rlogin) "rlogin" "\
Open a network login connection via `rlogin' with args INPUT-ARGS.
INPUT-ARGS should start with a host name; it may also contain
other arguments for `rlogin'.

Input is sent line-at-a-time to the remote connection.

Communication with the remote host is recorded in a buffer `*rlogin-HOST*'
\(or `*rlogin-USER@HOST*' if the remote username differs).
If a prefix argument is given and the buffer `*rlogin-HOST*' already exists,
a new buffer with a different connection will be made.

When called from a program, if the optional second argument BUFFER is
a string or buffer, it specifies the buffer to use.

The variable `rlogin-program' contains the name of the actual program to
run.  It can be a relative or absolute path.

The variable `rlogin-explicit-args' is a list of arguments to give to
the rlogin when starting.  They are added after any arguments given in
INPUT-ARGS.

If the default value of `rlogin-directory-tracking-mode' is t, then the
default directory in that buffer is set to a remote (FTP) file name to
access your home directory on the remote machine.  Occasionally this causes
an error, if you cannot access the home directory on that machine.  This
error is harmless as long as you don't try to use that default directory.

If `rlogin-directory-tracking-mode' is neither t nor nil, then the default
directory is initially set up to your (local) home directory.
This is useful if the remote machine and your local machine
share the same files via NFS.  This is the default.

If you wish to change directory tracking styles during a session, use the
function `rlogin-directory-tracking-mode' rather than simply setting the
variable." t nil)

;;;***

;;;### (autoloads (rmail-input rmail-mode rmail) "rmail" "rmail.el" (12807 37215))
;;; Generated autoloads from rmail.el

(defvar rmail-dont-reply-to-names nil "\
*A regexp specifying names to prune of reply to messages.
A value of nil means exclude your own name only.")

(defvar rmail-default-dont-reply-to-names "info-" "\
A regular expression specifying part of the value of the default value of
the variable `rmail-dont-reply-to-names', for when the user does not set
`rmail-dont-reply-to-names' explicitly.  (The other part of the default
value is the user's name.)
It is useful to set this variable in the site customization file.")

(defvar rmail-ignored-headers "^via:\\|^mail-from:\\|^origin:\\|^status:\\|^received:\\|^x400-originator:\\|^x400-recipients:\\|^x400-received:\\|^x400-mts-identifier:\\|^x400-content-type:\\|^\\(resent-\\|\\)message-id:\\|^summary-line:\\|^resent-date:\\|^nntp-posting-host:" "\
*Regexp to match Header fields that Rmail should normally hide.")

(defvar rmail-displayed-headers nil "\
*Regexp to match Header fields that Rmail should display.
If nil, display all header fields except those matched by
`rmail-ignored-headers'.")

(defvar rmail-retry-ignored-headers nil "\
*Headers that should be stripped when retrying a failed message.")

(defvar rmail-highlighted-headers "^From:\\|^Subject:" "\
*Regexp to match Header fields that Rmail should normally highlight.
A value of nil means don't highlight.
See also `rmail-highlight-face'.")

(defvar rmail-highlight-face nil "\
*Face used by Rmail for highlighting headers.")

(defvar rmail-delete-after-output nil "\
*Non-nil means automatically delete a message that is copied to a file.")

(defvar rmail-primary-inbox-list nil "\
*List of files which are inboxes for user's primary mail file `~/RMAIL'.
`nil' means the default, which is (\"/usr/spool/mail/$USER\")
\(the name varies depending on the operating system,
and the value of the environment variable MAIL overrides it).")

(defvar rmail-mail-new-frame nil "\
*Non-nil means Rmail makes a new frame for composing outgoing mail.")

(defvar rmail-secondary-file-directory "~/" "\
*Directory for additional secondary Rmail files.")

(defvar rmail-secondary-file-regexp "\\.xmail$" "\
*Regexp for which files are secondary Rmail files.")

(defvar rmail-mode-hook nil "\
List of functions to call when Rmail is invoked.")

(defvar rmail-get-new-mail-hook nil "\
List of functions to call when Rmail has retrieved new mail.")

(defvar rmail-show-message-hook nil "\
List of functions to call when Rmail displays a message.")

(defvar rmail-delete-message-hook nil "\
List of functions to call when Rmail deletes a message.
When the hooks are called, the message has been marked deleted but is
still the current message in the Rmail buffer.")

(autoload (quote rmail) "rmail" "\
Read and edit incoming mail.
Moves messages into file named by `rmail-file-name' (a babyl format file)
 and edits that file in RMAIL Mode.
Type \\[describe-mode] once editing that file, for a list of RMAIL commands.

May be called with file name as argument; then performs rmail editing on
that file, but does not copy any new mail into the file.
Interactively, if you supply a prefix argument, then you
have a chance to specify a file name with the minibuffer.

If `rmail-display-summary' is non-nil, make a summary for this RMAIL file." t nil)

(autoload (quote rmail-mode) "rmail" "\
Rmail Mode is used by \\<rmail-mode-map>\\[rmail] for editing Rmail files.
All normal editing commands are turned off.
Instead, these commands are available:

\\[rmail-beginning-of-message]	Move point to front of this message (same as \\[beginning-of-buffer]).
\\[scroll-up]	Scroll to next screen of this message.
\\[scroll-down]	Scroll to previous screen of this message.
\\[rmail-next-undeleted-message]	Move to Next non-deleted message.
\\[rmail-previous-undeleted-message]	Move to Previous non-deleted message.
\\[rmail-next-message]	Move to Next message whether deleted or not.
\\[rmail-previous-message]	Move to Previous message whether deleted or not.
\\[rmail-first-message]	Move to the first message in Rmail file.
\\[rmail-last-message]	Move to the last message in Rmail file.
\\[rmail-show-message]	Jump to message specified by numeric position in file.
\\[rmail-search]	Search for string and show message it is found in.
\\[rmail-delete-forward]	Delete this message, move to next nondeleted.
\\[rmail-delete-backward]	Delete this message, move to previous nondeleted.
\\[rmail-undelete-previous-message]	Undelete message.  Tries current message, then earlier messages
	till a deleted message is found.
\\[rmail-edit-current-message]	Edit the current message.  \\[rmail-cease-edit] to return to Rmail.
\\[rmail-expunge]	Expunge deleted messages.
\\[rmail-expunge-and-save]	Expunge and save the file.
\\[rmail-quit]       Quit Rmail: expunge, save, then switch to another buffer.
\\[save-buffer] Save without expunging.
\\[rmail-get-new-mail]	Move new mail from system spool directory into this file.
\\[rmail-mail]	Mail a message (same as \\[mail-other-window]).
\\[rmail-continue]	Continue composing outgoing message started before.
\\[rmail-reply]	Reply to this message.  Like \\[rmail-mail] but initializes some fields.
\\[rmail-retry-failure]	Send this message again.  Used on a mailer failure message.
\\[rmail-forward]	Forward this message to another user.
\\[rmail-output-to-rmail-file]       Output this message to an Rmail file (append it).
\\[rmail-output]	Output this message to a Unix-format mail file (append it).
\\[rmail-input]	Input Rmail file.  Run Rmail on that file.
\\[rmail-add-label]	Add label to message.  It will be displayed in the mode line.
\\[rmail-kill-label]	Kill label.  Remove a label from current message.
\\[rmail-next-labeled-message]   Move to Next message with specified label
          (label defaults to last one specified).
          Standard labels: filed, unseen, answered, forwarded, deleted.
          Any other label is present only if you add it with \\[rmail-add-label].
\\[rmail-previous-labeled-message]   Move to Previous message with specified label
\\[rmail-summary]	Show headers buffer, with a one line summary of each message.
\\[rmail-summary-by-labels]	Summarize only messages with particular label(s).
\\[rmail-summary-by-recipients]   Summarize only messages with particular recipient(s).
\\[rmail-summary-by-regexp]   Summarize only messages with particular regexp(s).
\\[rmail-summary-by-topic]   Summarize only messages with subject line regexp(s).
\\[rmail-toggle-header]	Toggle display of complete header." t nil)

(autoload (quote rmail-input) "rmail" "\
Run Rmail on file FILENAME." t nil)

;;;***

;;;### (autoloads nil "rmailsum" "rmailsum.el" (12774 62518))
;;; Generated autoloads from rmailsum.el

(defvar rmail-summary-scroll-between-messages t "\
*Non-nil means Rmail summary scroll commands move between messages.")

;;;***

;;;### (autoloads (news-post-news) "rnewspost" "rnewspost.el" (12587 31371))
;;; Generated autoloads from rnewspost.el

(autoload (quote news-post-news) "rnewspost" "\
Begin editing a new USENET news article to be posted.
Type \\[describe-mode] once editing the article to get a list of commands." t nil)

;;;***

;;;### (autoloads (toggle-rot13-mode rot13-other-window) "rot13" "rot13.el" (12545 51816))
;;; Generated autoloads from rot13.el

(autoload (quote rot13-other-window) "rot13" "\
Display current buffer in rot 13 in another window.
To terminate the rot13 display, delete that window." t nil)

(autoload (quote toggle-rot13-mode) "rot13" "\
Toggle the use of rot 13 encoding for the current window." t nil)

;;;***

;;;### (autoloads (resize-minibuffer-mode) "rsz-mini" "rsz-mini.el" (12545 51817))
;;; Generated autoloads from rsz-mini.el

(defvar resize-minibuffer-mode nil "\
*If non-`nil', resize the minibuffer so its entire contents are visible.")

(defvar resize-minibuffer-window-max-height nil "\
*Maximum size the minibuffer window is allowed to become.
If less than 1 or not a number, the limit is the height of the frame in
which the active minibuffer window resides.")

(defvar resize-minibuffer-window-exactly t "\
*Allow making minibuffer exactly the size to display all its contents.
If `nil', the minibuffer window can temporarily increase in size but
never get smaller while it is active.  Any other value allows exact
resizing.")

(defvar resize-minibuffer-frame nil "\
*Allow changing the frame height of minibuffer frames.
If non-`nil' and the active minibuffer is the sole window in its frame,
allow changing the frame height.")

(defvar resize-minibuffer-frame-max-height nil "\
*Maximum size the minibuffer frame is allowed to become.
If less than 1 or not a number, there is no limit.")

(defvar resize-minibuffer-frame-exactly t "\
*Allow making minibuffer frame exactly the size to display all its contents.
If `nil', the minibuffer frame can temporarily increase in size but
never get smaller while it is active.  Any other value allows exact
resizing.")

(autoload (quote resize-minibuffer-mode) "rsz-mini" "\
Enable or disable resize-minibuffer mode.
A negative prefix argument disables this mode.  A positive argument or
argument of 0 enables it.

When this minor mode is enabled, the minibuffer is dynamically resized to
contain the entire region of text put in it as you type.

The variable `resize-minibuffer-mode' is set to t or nil depending on
whether this mode is active or not.

The maximum height to which the minibuffer can grow is controlled by the
variable `resize-minibuffer-window-max-height'.

The variable `resize-minibuffer-window-exactly' determines whether the
minibuffer window should ever be shrunk to make it no larger than needed to
display its contents.

When using a window system, it is possible for a minibuffer to be the sole
window in a frame.  Since that window is already its maximum size, the only
way to make more text visible at once is to increase the size of the frame.
The variable `resize-minibuffer-frame' controls whether this should be
done.  The variables `resize-minibuffer-frame-max-height' and
`resize-minibuffer-frame-exactly' are analogous to their window
counterparts." t nil)

;;;***

;;;### (autoloads (scheme-mode) "scheme" "scheme.el" (12763 19530))
;;; Generated autoloads from scheme.el

(autoload (quote scheme-mode) "scheme" "\
Major mode for editing Scheme code.
Editing commands are similar to those of lisp-mode.

In addition, if an inferior Scheme process is running, some additional
commands will be defined, for evaluating expressions and controlling
the interpreter, and the state of the process will be displayed in the
modeline of all Scheme buffers.  The names of commands that interact
with the Scheme process start with \"xscheme-\".  For more information
see the documentation for xscheme-interaction-mode.

Commands:
Delete converts tabs to spaces as it moves back.
Blank lines separate paragraphs.  Semicolons start comments.
\\{scheme-mode-map}
Entry to this mode calls the value of scheme-mode-hook
if that value is non-nil." t nil)

;;;***

;;;### (autoloads (gnus-score-mode) "score-mode" "score-mode.el" (12758 49973))
;;; Generated autoloads from score-mode.el

(autoload (quote gnus-score-mode) "score-mode" "\
Mode for editing Gnus score files.
This mode is an extended emacs-lisp mode.

\\{gnus-score-mode-map}" t nil)

;;;***

;;;### (autoloads (scribe-mode) "scribe" "scribe.el" (12536 45574))
;;; Generated autoloads from scribe.el

(autoload (quote scribe-mode) "scribe" "\
Major mode for editing files of Scribe (a text formatter) source.
Scribe-mode is similar text-mode, with a few extra commands added.
\\{scribe-mode-map}

Interesting variables:

scribe-fancy-paragraphs
  Non-nil makes Scribe mode use a different style of paragraph separation.

scribe-electric-quote
  Non-nil makes insert of double quote use `` or '' depending on context.

scribe-electric-parenthesis
  Non-nil makes an open-parenthesis char (one of `([<{')
  automatically insert its close if typed after an @Command form." t nil)

;;;***

;;;### (autoloads (mail-other-frame mail-other-window mail mail-mode) "sendmail" "sendmail.el" (12755 38587))
;;; Generated autoloads from sendmail.el

(defvar mail-from-style (quote angles) "\
*Specifies how \"From:\" fields look.

If `nil', they contain just the return address like:
	king@grassland.com
If `parens', they look like:
	king@grassland.com (Elvis Parsley)
If `angles', they look like:
	Elvis Parsley <king@grassland.com>")

(defvar mail-self-blind nil "\
Non-nil means insert BCC to self in messages to be sent.
This is done when the message is initialized,
so you can remove or alter the BCC field to override the default.")

(defvar mail-interactive nil "\
Non-nil means when sending a message wait for and display errors.
nil means let mailer mail back a message to report errors.")

(defvar mail-yank-ignored-headers "^via:\\|^mail-from:\\|^origin:\\|^status:\\|^remailed\\|^received:\\|^message-id:\\|^summary-line:\\|^to:\\|^subject:\\|^in-reply-to:\\|^return-path:" "\
Delete these headers from old message when it's inserted in a reply.")

(defvar send-mail-function (quote sendmail-send-it) "\
Function to call to send the current buffer as mail.
The headers should be delimited by a line whose contents
match the variable `mail-header-separator'.")

(defvar mail-header-separator "--text follows this line--" "\
*Line used to separate headers from text in messages being composed.")

(defvar mail-archive-file-name nil "\
*Name of file to write all outgoing messages in, or nil for none.
This can be an inbox file or an Rmail file.")

(defvar mail-default-reply-to nil "\
*Address to insert as default Reply-to field of outgoing messages.
If nil, it will be initialized from the REPLYTO environment variable
when you first send mail.")

(defvar mail-alias-file nil "\
*If non-nil, the name of a file to use instead of `/usr/lib/aliases'.
This file defines aliases to be expanded by the mailer; this is a different
feature from that of defining aliases in `.mailrc' to be expanded in Emacs.
This variable has no effect unless your system uses sendmail as its mailer.")

(defvar mail-personal-alias-file "~/.mailrc" "\
*If non-nil, the name of the user's personal mail alias file.
This file typically should be in same format as the `.mailrc' file used by
the `Mail' or `mailx' program.
This file need not actually exist.")

(defvar mail-signature nil "\
*Text inserted at end of mail buffer when a message is initialized.
If t, it means to insert the contents of the file `mail-signature-file'.")

(autoload (quote mail-mode) "sendmail" "\
Major mode for editing mail to be sent.
Like Text Mode but with these additional commands:
C-c C-s  mail-send (send the message)    C-c C-c  mail-send-and-exit
C-c C-f  move to a header field (and create it if there isn't):
	 C-c C-f C-t  move to To:	C-c C-f C-s  move to Subject:
	 C-c C-f C-c  move to CC:	C-c C-f C-b  move to BCC:
	 C-c C-f C-f  move to FCC:
C-c C-t  mail-text (move to beginning of message text).
C-c C-w  mail-signature (insert `mail-signature-file' file).
C-c C-y  mail-yank-original (insert current message, in Rmail).
C-c C-q  mail-fill-yanked-message (fill what was yanked).
C-c C-v  mail-sent-via (add a Sent-via field for each To or CC)." t nil)

(autoload (quote mail) "sendmail" "\
Edit a message to be sent.  Prefix arg means resume editing (don't erase).
When this function returns, the buffer `*mail*' is selected.
The value is t if the message was newly initialized; otherwise, nil.

Optionally, the signature file `mail-signature-file' can be inserted at the
end; see the variable `mail-signature'.

\\<mail-mode-map>
While editing message, type \\[mail-send-and-exit] to send the message and exit.

Various special commands starting with C-c are available in sendmail mode
to move to message header fields:
\\{mail-mode-map}

If `mail-self-blind' is non-nil, a BCC to yourself is inserted
when the message is initialized.

If `mail-default-reply-to' is non-nil, it should be an address (a string);
a Reply-to: field with that address is inserted.

If `mail-archive-file-name' is non-nil, an FCC field with that file name
is inserted.

The normal hook `mail-setup-hook' is run after the message is
initialized.  It can add more default fields to the message.

When calling from a program, the first argument if non-nil says
not to erase the existing contents of the `*mail*' buffer.

The second through fifth arguments,
 TO, SUBJECT, IN-REPLY-TO and CC, specify if non-nil
 the initial contents of those header fields.
 These arguments should not have final newlines.
The sixth argument REPLYBUFFER is a buffer whose contents
 should be yanked if the user types C-c C-y.
The seventh argument ACTIONS is a list of actions to take
 if/when the message is sent.  Each action looks like (FUNCTION . ARGS);
 when the message is sent, we apply FUNCTION to ARGS.
 This is how Rmail arranges to mark messages `answered'." t nil)

(autoload (quote mail-other-window) "sendmail" "\
Like `mail' command, but display mail buffer in another window." t nil)

(autoload (quote mail-other-frame) "sendmail" "\
Like `mail' command, but display mail buffer in another frame." t nil)
 (define-key ctl-x-map "m" 'mail)
 (define-key ctl-x-4-map "m" 'mail-other-window)
 (define-key ctl-x-5-map "m" 'mail-other-frame)
 (add-hook 'same-window-buffer-names "*mail*")

;;;***

;;;### (autoloads (server-start) "server" "server.el" (12596 58821))
;;; Generated autoloads from server.el

(autoload (quote server-start) "server" "\
Allow this Emacs process to be a server for client processes.
This starts a server communications subprocess through which
client \"editors\" can send your editing commands to this Emacs job.
To use the server, set up the program `emacsclient' in the
Emacs distribution as your standard \"editor\".

Prefix arg means just kill any existing server communications subprocess." t nil)

;;;***

;;;### (autoloads (html-mode sgml-mode) "sgml-mode" "sgml-mode.el" (12739 17407))
;;; Generated autoloads from sgml-mode.el

(autoload (quote sgml-mode) "sgml-mode" "\
Major mode for editing SGML documents.
Makes > match <.  Makes / blink matching /.
Keys <, &, SPC within <>, \" and ' can be electric depending on
`sgml-quick-keys'.

Do \\[describe-variable] sgml- SPC to see available variables.

Use \\[sgml-validate] to validate your document with an SGML parser.
\\{sgml-mode-map}" t nil)

(autoload (quote html-mode) "sgml-mode" "\
Major mode based on SGML mode for editing HTML documents.
This allows inserting skeleton costructs used in hypertext documents with
completion.  See below for an introduction to HTML.  Use
\\[browse-url-of-buffer] to see how this comes out.  See also `sgml-mode' on
which this is based.

Do \\[describe-variable] html- SPC and \\[describe-variable] sgml- SPC to see available variables.

To write fairly well formatted pages you only need to know few things.  Most
browsers have a function to read the source code of the page being seen, so
you can imitate various tricks.  Here's a very short HTML primer which you
can also view with a browser to see what happens:

<title>A Title Describing Contents</title> should be on every page.  Pages can
have <h1>Very Major Headlines</h1> through <h6>Very Minor Headlines</h6>
<hr> Parts can be separated with horizontal rules.

<p>Paragraphs only need an opening tag.  Line breaks and multiple spaces are
ignored unless the text is <pre>preformatted.</pre>  Text can be marked as
<b>bold</b>, <i>italic</i> or <u>underlined</u> using the normal  M-g  or
Edit/Text Properties/Face commands.

Pages can have <a name=\"SOMENAME\">named points</a> and can link other points
to them with <a href=\"#SOMENAME\">see also somename</a>.  In the same way <a
href=\"URL\">see also URL</a> where URL is a filename relative to current
directory or something like http://www.cs.indiana.edu/elisp/w3/docs.html.

Images in many formats can be inlined with <img src=\"URL\">.

If you mainly create your own documents, `sgml-specials' might be interesting.
But note that some HTML 2 browsers can't handle &apos;.  To work around that
do:

\(eval-after-load \"sgml-mode\" '(aset sgml-char-names ?' nil))
\\{html-mode-map}" t nil)

;;;***

;;;### (autoloads (sh-mode) "sh-script" "sh-script.el" (12778 42738))
;;; Generated autoloads from sh-script.el

(put (quote sh-mode) (quote mode-class) (quote special))

(autoload (quote sh-mode) "sh-script" "\
Major mode for editing shell scripts.
This mode works for many shells, since they all have roughly the same syntax,
as far as commands, arguments, variables, pipes, comments etc. are concerned.
Unless the file's magic number indicates the shell, your usual shell is
assumed.  Since filenames rarely give a clue, they are not further analyzed.

This mode adapts to the variations between shells (see `sh-set-shell') by
means of an inheritance based feature lookup (see `sh-feature').  This
mechanism applies to all variables (including skeletons) that pertain to
shell-specific features.

The default style of this mode is that of Rosenblatt's Korn shell book.
The syntax of the statements varies with the shell being used.  The
following commands are available, based on the current shell's syntax:

\\[sh-case]	 case statement
\\[sh-for]	 for loop
\\[sh-function]	 function definition
\\[sh-if]	 if statement
\\[sh-indexed-loop]	 indexed loop from 1 to n
\\[sh-while-getopts]	 while getopts loop
\\[sh-repeat]	 repeat loop
\\[sh-select]	 select loop
\\[sh-until]	 until loop
\\[sh-while]	 while loop

\\[backward-delete-char-untabify]	 Delete backward one position, even if it was a tab.
\\[sh-newline-and-indent]	 Delete unquoted space and indent new line same as this one.
\\[sh-end-of-command]	 Go to end of successive commands.
\\[sh-beginning-of-command]	 Go to beginning of successive commands.
\\[sh-set-shell]	 Set this buffer's shell, and maybe its magic number.
\\[sh-execute-region]	 Have optional header and region be executed in a subshell.

\\[sh-maybe-here-document]	 Without prefix, following an unquoted < inserts here document.
{, (, [, ', \", `
	Unless quoted with \\, insert the pairs {}, (), [], or '', \"\", ``.

If you generally program a shell different from your login shell you can
set `sh-shell-file' accordingly.  If your shell's file name doesn't correctly
indicate what shell it is use `sh-alias-alist' to translate.

If your shell gives error messages with line numbers, you can use \\[executable-interpret]
with your script for an edit-interpret-debug cycle." t nil)

(defalias (quote shell-script-mode) (quote sh-mode))

;;;***

;;;### (autoloads (list-load-path-shadows) "shadow" "shadow.el" (12788 55803))
;;; Generated autoloads from shadow.el

(autoload (quote list-load-path-shadows) "shadow" "\
Display a list of Emacs Lisp files that shadow other files.

This function lists potential load-path problems.  Directories in the
`load-path' variable are searched, in order, for Emacs Lisp
files.  When a previously encountered file name is found again, a
message is displayed indicating that the later file is \"hidden\" by
the earlier.

For example, suppose `load-path' is set to

\(\"/usr/gnu/emacs/site-lisp\" \"/usr/gnu/emacs/share/emacs/19.30/lisp\")

and that each of these directories contains a file called XXX.el.  Then
XXX.el in the site-lisp directory is referred to by all of:
\(require 'XXX), (autoload .... \"XXX\"), (load-library \"XXX\") etc.

The first XXX.el file prevents emacs from seeing the second (unless
the second is loaded explicitly via load-file).

When not intended, such shadowings can be the source of subtle
problems.  For example, the above situation may have arisen because the
XXX package was not distributed with versions of emacs prior to
19.30.  An emacs maintainer downloaded XXX from elsewhere and installed
it.  Later, XXX was updated and included in the emacs distribution.
Unless the emacs maintainer checks for this, the new version of XXX
will be hidden behind the old (which may no longer work with the new
emacs version).

This function performs these checks and flags all possible
shadowings.  Because a .el file may exist without a corresponding .elc
\(or vice-versa), these suffixes are essentially ignored.  A file
XXX.elc in an early directory (that does not contain XXX.el) is
considered to shadow a later file XXX.el, and vice-versa.

When run interactively, the shadowings (if any) are displayed in a
buffer called `*Shadows*'.  Shadowings are located by calling the
\(non-interactive) companion function, `find-emacs-lisp-shadows'." t nil)

;;;***

;;;### (autoloads (shell) "shell" "shell.el" (12801 12210))
;;; Generated autoloads from shell.el

(defvar shell-prompt-pattern "^[^#$%>\n]*[#$%>] *" "\
Regexp to match prompts in the inferior shell.
Defaults to \"^[^#$%>\\n]*[#$%>] *\", which works pretty well.
This variable is used to initialise `comint-prompt-regexp' in the 
shell buffer.

The pattern should probably not match more than one line.  If it does,
Shell mode may become confused trying to distinguish prompt from input
on lines which don't start with a prompt.

This is a fine thing to set in your `.emacs' file.")

(autoload (quote shell) "shell" "\
Run an inferior shell, with I/O through buffer *shell*.
If buffer exists but shell process is not running, make new shell.
If buffer exists and shell process is running, just switch to buffer `*shell*'.
Program used comes from variable `explicit-shell-file-name',
 or (if that is nil) from the ESHELL environment variable,
 or else from SHELL if there is no ESHELL.
If a file `~/.emacs_SHELLNAME' exists, it is given as initial input
 (Note that this may lose due to a timing error if the shell
  discards input when it starts up.)
The buffer is put in Shell mode, giving commands for sending input
and controlling the subjobs of the shell.  See `shell-mode'.
See also the variable `shell-prompt-pattern'.

The shell file name (sans directories) is used to make a symbol name
such as `explicit-csh-args'.  If that symbol is a variable,
its value is used as a list of arguments when invoking the shell.
Otherwise, one argument `-i' is passed to the shell.

\(Type \\[describe-mode] in the shell buffer for a list of commands.)" t nil)
 (add-hook 'same-window-buffer-names "*shell*")

;;;***

;;;### (autoloads (skeleton-pair-insert-maybe skeleton-insert skeleton-proxy skeleton-proxy-new define-skeleton) "skeleton" "skeleton.el" (12752 13637))
;;; Generated autoloads from skeleton.el

(defvar skeleton-filter (quote identity) "\
Function for transforming a skeleton proxy's aliases' variable value.")

(autoload (quote define-skeleton) "skeleton" "\
Define a user-configurable COMMAND that enters a statement skeleton.
DOCUMENTATION is that of the command, while the variable of the same name,
which contains the skeleton, has a documentation to that effect.
INTERACTOR and ELEMENT ... are as defined under `skeleton-insert'." nil (quote macro))

(autoload (quote skeleton-proxy-new) "skeleton" "\
Insert skeleton defined by variable of same name (see `skeleton-insert').
Prefix ARG allows wrapping around words or regions (see `skeleton-insert').
If no ARG was given, but the region is visible, ARG defaults to -1 depending
on `skeleton-autowrap'.  An ARG of  M-0  will prevent this just for once.
This command can also be an abbrev expansion (3rd and 4th columns in
\\[edit-abbrevs]  buffer: \"\"  command-name).

When called as a function, optional first argument STR may also be a string
which will be the value of `str' whereas the skeleton's interactor is then
ignored." t nil)

(autoload (quote skeleton-proxy) "skeleton" "\
Insert skeleton defined by variable of same name (see `skeleton-insert').
Prefix ARG allows wrapping around words or regions (see `skeleton-insert').
If no ARG was given, but the region is visible, ARG defaults to -1 depending
on `skeleton-autowrap'.  An ARG of  M-0  will prevent this just for once.
This command can also be an abbrev expansion (3rd and 4th columns in
\\[edit-abbrevs]  buffer: \"\"  command-name).

When called as a function, optional first argument STR may also be a string
which will be the value of `str' whereas the skeleton's interactor is then
ignored." t nil)

(autoload (quote skeleton-insert) "skeleton" "\
Insert the complex statement skeleton SKELETON describes very concisely.

With optional third REGIONS wrap first interesting point (`_') in skeleton
around next REGIONS words, if REGIONS is positive.  If REGIONS is negative,
wrap REGIONS preceding interregions into first REGIONS interesting positions
\(successive `_'s) in skeleton.  An interregion is the stretch of text between
two contiguous marked points.  If you marked A B C [] (where [] is the cursor)
in alphabetical order, the 3 interregions are simply the last 3 regions.  But
if you marked B A [] C, the interregions are B-A, A-[], []-C.

Optional fourth STR is the value for the variable `str' within the skeleton.
When this is non-`nil' the interactor gets ignored, and this should be a valid
skeleton element.

SKELETON is made up as (INTERACTOR ELEMENT ...).  INTERACTOR may be nil if
not needed, a prompt-string or an expression for complex read functions.

If ELEMENT is a string or a character it gets inserted (see also
`skeleton-transformation').  Other possibilities are:

	\\n	go to next line and indent according to mode
	_	interesting point, interregion here, point after termination
	>	indent line (or interregion if > _) according to major mode
	&	do next ELEMENT if previous moved point
	|	do next ELEMENT if previous didn't move point
	-num	delete num preceding characters (see `skeleton-untabify')
	resume:	skipped, continue here if quit is signaled
	nil	skipped

Further elements can be defined via `skeleton-further-elements'.  ELEMENT may
itself be a SKELETON with an INTERACTOR.  The user is prompted repeatedly for
different inputs.  The SKELETON is processed as often as the user enters a
non-empty string.  \\[keyboard-quit] terminates skeleton insertion, but
continues after `resume:' and positions at `_' if any.  If INTERACTOR in such
a subskeleton is a prompt-string which contains a \".. %s ..\" it is
formatted with `skeleton-subprompt'.  Such an INTERACTOR may also a list of
strings with the subskeleton being repeated once for each string.

Quoted Lisp expressions are evaluated evaluated for their side-effect.
Other Lisp expressions are evaluated and the value treated as above.
Note that expressions may not return `t' since this implies an
endless loop.  Modes can define other symbols by locally setting them
to any valid skeleton element.  The following local variables are
available:

	str	first time: read a string according to INTERACTOR
		then: insert previously read string once more
	help	help-form during interaction with the user or `nil'
	input	initial input (string or cons with index) while reading str
	v1, v2	local variables for memorizing anything you want

When done with skeleton, but before going back to `_'-point call
`skeleton-end-hook' if that is non-`nil'." nil nil)

(autoload (quote skeleton-pair-insert-maybe) "skeleton" "\
Insert the character you type ARG times.

With no ARG, if `skeleton-pair' is non-nil, pairing can occur.  If the region
is visible the pair is wrapped around it depending on `skeleton-autowrap'.
Else, if `skeleton-pair-on-word' is non-nil or we are not before or inside a
word, and if `skeleton-pair-filter' returns nil, pairing is performed.

If a match is found in `skeleton-pair-alist', that is inserted, else
the defaults are used.  These are (), [], {}, <> and `' for the
symmetrical ones, and the same character twice for the others." t nil)

;;;***

;;;### (autoloads (solar-equinoxes-solstices sunrise-sunset) "solar" "solar.el" (12673 26218))
;;; Generated autoloads from solar.el

(defvar calendar-time-display-form (quote (12-hours ":" minutes am-pm (if time-zone " (") time-zone (if time-zone ")"))) "\
*The pseudo-pattern that governs the way a time of day is formatted.

A pseudo-pattern is a list of expressions that can involve the keywords
`12-hours', `24-hours', and `minutes',  all numbers in string form,
and `am-pm' and `time-zone',  both alphabetic strings.

For example, the form

  '(24-hours \":\" minutes
    (if time-zone \" (\") time-zone (if time-zone \")\"))

would give military-style times like `21:07 (UTC)'.")

(defvar calendar-latitude nil "\
*Latitude of `calendar-location-name' in degrees.

The value can be either a decimal fraction (one place of accuracy is
sufficient), + north, - south, such as 40.7 for New York City, or the value
can be a vector [degrees minutes north/south] such as [40 50 north] for New
York City.

This variable should be set in `site-start'.el.")

(defvar calendar-longitude nil "\
*Longitude of `calendar-location-name' in degrees.

The value can be either a decimal fraction (one place of accuracy is
sufficient), + east, - west, such as -73.9 for New York City, or the value
can be a vector [degrees minutes east/west] such as [73 55 west] for New
York City.

This variable should be set in `site-start'.el.")

(defvar calendar-location-name (quote (let ((float-output-format "%.1f")) (format "%s%s, %s%s" (if (numberp calendar-latitude) (abs calendar-latitude) (+ (aref calendar-latitude 0) (/ (aref calendar-latitude 1) 60.0))) (if (numberp calendar-latitude) (if (> calendar-latitude 0) "N" "S") (if (equal (aref calendar-latitude 2) (quote north)) "N" "S")) (if (numberp calendar-longitude) (abs calendar-longitude) (+ (aref calendar-longitude 0) (/ (aref calendar-longitude 1) 60.0))) (if (numberp calendar-longitude) (if (> calendar-longitude 0) "E" "W") (if (equal (aref calendar-longitude 2) (quote east)) "E" "W"))))) "\
*Expression evaluating to name of `calendar-longitude', calendar-latitude'.
For example, \"New York City\".  Default value is just the latitude, longitude
pair.

This variable should be set in `site-start'.el.")

(autoload (quote sunrise-sunset) "solar" "\
Local time of sunrise and sunset for today.  Accurate to a few seconds.
If called with an optional prefix argument, prompt for date.

If called with an optional double prefix argument, prompt for longitude,
latitude, time zone, and date, and always use standard time.

This function is suitable for execution in a .emacs file." t nil)

(autoload (quote solar-equinoxes-solstices) "solar" "\
*local* date and time of equinoxes and solstices, if visible in the calendar window.
Requires floating point." nil nil)

;;;***

;;;### (autoloads (solitaire) "solitaire" "solitaire.el" (12575 63004))
;;; Generated autoloads from solitaire.el

(autoload (quote solitaire) "solitaire" "\
Play Solitaire.

To play Solitaire, type \\[solitaire].
\\<solitaire-mode-map>
Move around the board using the cursor keys.
Move stones using \\[solitaire-move] followed by a direction key.
Undo moves using \\[solitaire-undo].
Check for possible moves using \\[solitaire-do-check].
\(The variable solitaire-auto-eval controls whether to automatically
check after each move or undo)

What is Solitaire?

I don't know who invented this game, but it seems to be rather old and
it's origin seems be northern Africa.  Here's how to play:
Initially, the board will look similar to this:

	Le Solitaire             
	============             
	
		o   o   o        
	
		o   o   o        
	
	o   o   o   o   o   o   o
	
	o   o   o   .   o   o   o
	
	o   o   o   o   o   o   o
	
		o   o   o        
	
		o   o   o        

Let's call the o's stones and the .'s holes.  One stone fits into one
hole.  As you can see, all holes but one are occupied by stones.  The
aim of the game is to get rid of all but one stone, leaving that last
one in the middle of the board if you're cool.

A stone can be moved if there is another stone next to it, and a hole
after that one.  Thus there must be three fields in a row, either
horizontally or vertically, up, down, left or right, which look like
this:  o  o  .

Then the first stone is moved to the hole, jumping over the second,
which therefore is taken away.  The above thus `evaluates' to:  .  .  o

That's all.  Here's the board after two moves:

		o   o   o        
	
		.   o   o        
	
	o   o   .   o   o   o   o
	
	o   .   o   o   o   o   o
	
	o   o   o   o   o   o   o
	
		o   o   o        
	
		o   o   o

Pick your favourite shortcuts:

\\{solitaire-mode-map}" t nil)

;;;***

;;;### (autoloads (reverse-region sort-columns sort-regexp-fields sort-fields sort-numeric-fields sort-pages sort-paragraphs sort-lines sort-subr) "sort" "sort.el" (12545 51814))
;;; Generated autoloads from sort.el

(autoload (quote sort-subr) "sort" "\
General text sorting routine to divide buffer into records and sort them.
Arguments are REVERSE NEXTRECFUN ENDRECFUN &optional STARTKEYFUN ENDKEYFUN.

We divide the accessible portion of the buffer into disjoint pieces
called sort records.  A portion of each sort record (perhaps all of
it) is designated as the sort key.  The records are rearranged in the
buffer in order by their sort keys.  The records may or may not be
contiguous.

Usually the records are rearranged in order of ascending sort key.
If REVERSE is non-nil, they are rearranged in order of descending sort key.

The next four arguments are functions to be called to move point
across a sort record.  They will be called many times from within sort-subr.

NEXTRECFUN is called with point at the end of the previous record.
It moves point to the start of the next record.
It should move point to the end of the buffer if there are no more records.
The first record is assumed to start at the position of point when sort-subr
is called.

ENDRECFUN is called with point within the record.
It should move point to the end of the record.

STARTKEYFUN moves from the start of the record to the start of the key.
It may return either a non-nil value to be used as the key, or
else the key is the substring between the values of point after
STARTKEYFUN and ENDKEYFUN are called.  If STARTKEYFUN is nil, the key
starts at the beginning of the record.

ENDKEYFUN moves from the start of the sort key to the end of the sort key.
ENDKEYFUN may be nil if STARTKEYFUN returns a value or if it would be the
same as ENDRECFUN." nil nil)

(autoload (quote sort-lines) "sort" "\
Sort lines in region alphabetically; argument means descending order.
Called from a program, there are three arguments:
REVERSE (non-nil means reverse order), BEG and END (region to sort)." t nil)

(autoload (quote sort-paragraphs) "sort" "\
Sort paragraphs in region alphabetically; argument means descending order.
Called from a program, there are three arguments:
REVERSE (non-nil means reverse order), BEG and END (region to sort)." t nil)

(autoload (quote sort-pages) "sort" "\
Sort pages in region alphabetically; argument means descending order.
Called from a program, there are three arguments:
REVERSE (non-nil means reverse order), BEG and END (region to sort)." t nil)

(autoload (quote sort-numeric-fields) "sort" "\
Sort lines in region numerically by the ARGth field of each line.
Fields are separated by whitespace and numbered from 1 up.
Specified field must contain a number in each line of the region.
With a negative arg, sorts by the ARGth field counted from the right.
Called from a program, there are three arguments:
FIELD, BEG and END.  BEG and END specify region to sort." t nil)

(autoload (quote sort-fields) "sort" "\
Sort lines in region lexicographically by the ARGth field of each line.
Fields are separated by whitespace and numbered from 1 up.
With a negative arg, sorts by the ARGth field counted from the right.
Called from a program, there are three arguments:
FIELD, BEG and END.  BEG and END specify region to sort." t nil)

(autoload (quote sort-regexp-fields) "sort" "\
Sort the region lexicographically as specified by RECORD-REGEXP and KEY.
RECORD-REGEXP specifies the textual units which should be sorted.
  For example, to sort lines RECORD-REGEXP would be \"^.*$\"
KEY specifies the part of each record (ie each match for RECORD-REGEXP)
  is to be used for sorting.
  If it is \"\\\\digit\" then the digit'th \"\\\\(...\\\\)\" match field from
  RECORD-REGEXP is used.
  If it is \"\\\\&\" then the whole record is used.
  Otherwise, it is a regular-expression for which to search within the record.
If a match for KEY is not found within a record then that record is ignored.

With a negative prefix arg sorts in reverse order.

For example: to sort lines in the region by the first word on each line
 starting with the letter \"f\",
 RECORD-REGEXP would be \"^.*$\" and KEY would be \"\\\\=\\<f\\\\w*\\\\>\"" t nil)

(autoload (quote sort-columns) "sort" "\
Sort lines in region alphabetically by a certain range of columns.
For the purpose of this command, the region includes
the entire line that point is in and the entire line the mark is in.
The column positions of point and mark bound the range of columns to sort on.
A prefix argument means sort into reverse order.

Note that `sort-columns' rejects text that contains tabs,
because tabs could be split across the specified columns
and it doesn't know how to handle that.  Also, when possible,
it uses the `sort' utility program, which doesn't understand tabs.
Use \\[untabify] to convert tabs to spaces before sorting." t nil)

(autoload (quote reverse-region) "sort" "\
Reverse the order of lines in a region.
From a program takes two point or marker arguments, BEG and END." t nil)

;;;***

;;;### (autoloads (spell-string spell-region spell-word spell-buffer) "spell" "spell.el" (12545 51841))
;;; Generated autoloads from spell.el

(put (quote spell-filter) (quote risky-local-variable) t)

(autoload (quote spell-buffer) "spell" "\
Check spelling of every word in the buffer.
For each incorrect word, you are asked for the correct spelling
and then put into a query-replace to fix some or all occurrences.
If you do not want to change a word, just give the same word
as its \"correct\" spelling; then the query replace is skipped." t nil)

(autoload (quote spell-word) "spell" "\
Check spelling of word at or before point.
If it is not correct, ask user for the correct spelling
and `query-replace' the entire buffer to substitute it." t nil)

(autoload (quote spell-region) "spell" "\
Like `spell-buffer' but applies only to region.
Used in a program, applies from START to END.
DESCRIPTION is an optional string naming the unit being checked:
for example, \"word\"." t nil)

(autoload (quote spell-string) "spell" "\
Check spelling of string supplied as argument." t nil)

;;;***

;;;### (autoloads (snarf-spooks spook) "spook" "spook.el" (12545 51841))
;;; Generated autoloads from spook.el

(autoload (quote spook) "spook" "\
Adds that special touch of class to your outgoing mail." t nil)

(autoload (quote snarf-spooks) "spook" "\
Return a vector containing the lines from `spook-phrases-file'." nil nil)

;;;***

;;;### (autoloads (sc-cite-original) "supercite" "supercite.el" (12545 51848))
;;; Generated autoloads from supercite.el

(autoload (quote sc-cite-original) "supercite" "\
Workhorse citing function which performs the initial citation.
This is callable from the various mail and news readers' reply
function according to the agreed upon standard.  See `\\[sc-describe]'
for more details.  `sc-cite-original' does not do any yanking of the
original message but it does require a few things:

     1) The reply buffer is the current buffer.

     2) The original message has been yanked and inserted into the
        reply buffer.

     3) Verbose mail headers from the original message have been
        inserted into the reply buffer directly before the text of the
        original message.

     4) Point is at the beginning of the verbose headers.

     5) Mark is at the end of the body of text to be cited.

For Emacs 19's, the region need not be active (and typically isn't
when this function is called.  Also, the hook `sc-pre-hook' is run
before, and `sc-post-hook' is run after the guts of this function." nil nil)

;;;***

;;;### (autoloads (tabify untabify) "tabify" "tabify.el" (12545 51850))
;;; Generated autoloads from tabify.el

(autoload (quote untabify) "tabify" "\
Convert all tabs in region to multiple spaces, preserving columns.
Called non-interactively, the region is specified by arguments
START and END, rather than by the position of point and mark.
The variable `tab-width' controls the spacing of tab stops." t nil)

(autoload (quote tabify) "tabify" "\
Convert multiple spaces in region to tabs when possible.
A group of spaces is partially replaced by tabs
when this can be done without changing the column they end at.
Called non-interactively, the region is specified by arguments
START and END, rather than by the position of point and mark.
The variable `tab-width' controls the spacing of tab stops." t nil)

;;;***

;;;### (autoloads (talk-connect) "talk" "talk.el" (12545 51851))
;;; Generated autoloads from talk.el

(autoload (quote talk-connect) "talk" "\
Connect to display DISPLAY for the Emacs talk group." t nil)

;;;***

;;;### (autoloads (tar-mode) "tar-mode" "tar-mode.el" (12767 4318))
;;; Generated autoloads from tar-mode.el

(autoload (quote tar-mode) "tar-mode" "\
Major mode for viewing a tar file as a dired-like listing of its contents.
You can move around using the usual cursor motion commands. 
Letters no longer insert themselves.
Type `e' to pull a file out of the tar file and into its own buffer;
or click mouse-2 on the file's line in the Tar mode buffer.
Type `c' to copy an entry from the tar file into another file on disk.

If you edit a sub-file of this archive (as with the `e' command) and 
save it with Control-x Control-s, the contents of that buffer will be 
saved back into the tar-file buffer; in this way you can edit a file 
inside of a tar archive without extracting it and re-archiving it.

See also: variables `tar-update-datestamp' and `tar-anal-blocksize'.
\\{tar-mode-map}" nil nil)

;;;***

;;;### (autoloads (tcl-mode) "tcl-mode" "tcl-mode.el" (12761 19256))
;;; Generated autoloads from tcl-mode.el

(autoload (quote tcl-mode) "tcl-mode" "\
Major mode for editing tcl scripts.
The following keys are bound:
\\{tcl-mode-map}
" t nil)

;;;***

;;;### (autoloads (rsh telnet) "telnet" "telnet.el" (12545 51855))
;;; Generated autoloads from telnet.el
 (add-hook 'same-window-regexps "\\*telnet-.*\\*\\(\\|<[0-9]+>\\)")

(autoload (quote telnet) "telnet" "\
Open a network login connection to host named HOST (a string).
Communication with HOST is recorded in a buffer `*telnet-HOST*'.
Normally input is edited in Emacs and sent a line at a time." t nil)
 (add-hook 'same-window-regexps "\\*rsh-[^-]*\\*\\(\\|<[0-9]*>\\)")

(autoload (quote rsh) "telnet" "\
Open a network login connection to host named HOST (a string).
Communication with HOST is recorded in a buffer `*rsh-HOST*'.
Normally input is edited in Emacs and sent a line at a time." t nil)

;;;***

;;;### (autoloads (term make-term) "term" "term.el" (12749 26402))
;;; Generated autoloads from term.el

(autoload (quote make-term) "term" "\
Make a term process NAME in a buffer, running PROGRAM.
The name of the buffer is made by surrounding NAME with `*'s.
If there is already a running process in that buffer, it is not restarted.
Optional third arg STARTFILE is the name of a file to send the contents of to 
the process.  Any more args are arguments to PROGRAM." nil nil)

(autoload (quote term) "term" "\
Start a terminal-emulator in a new buffer." t nil)

;;;***

;;;### (autoloads (terminal-emulator) "terminal" "terminal.el" (12629 20482))
;;; Generated autoloads from terminal.el

(autoload (quote terminal-emulator) "terminal" "\
Under a display-terminal emulator in BUFFER, run PROGRAM on arguments ARGS.
ARGS is a list of argument-strings.  Remaining arguments are WIDTH and HEIGHT.
BUFFER's contents are made an image of the display generated by that program,
and any input typed when BUFFER is the current Emacs buffer is sent to that
program an keyboard input.

Interactively, BUFFER defaults to \"*terminal*\" and PROGRAM and ARGS
are parsed from an input-string using your usual shell.
WIDTH and HEIGHT are determined from the size of the current window
-- WIDTH will be one less than the window's width, HEIGHT will be its height.

To switch buffers and leave the emulator, or to give commands
to the emulator itself (as opposed to the program running under it),
type Control-^.  The following character is an emulator command.
Type Control-^ twice to send it to the subprogram.
This escape character may be changed using the variable `terminal-escape-char'.

`Meta' characters may not currently be sent through the terminal emulator.

Here is a list of some of the variables which control the behaviour
of the emulator -- see their documentation for more information:
terminal-escape-char, terminal-scrolling, terminal-more-processing,
terminal-redisplay-interval.

This function calls the value of terminal-mode-hook if that exists
and is non-nil after the terminal buffer has been set up and the
subprocess started." t nil)

;;;***

;;;### (autoloads (tex-start-shell slitex-mode latex-mode plain-tex-mode tex-mode) "tex-mode" "tex-mode.el" (12773 37893))
;;; Generated autoloads from tex-mode.el

(defvar tex-shell-file-name nil "\
*If non-nil, the shell file name to run in the subshell used to run TeX.")

(defvar tex-directory "." "\
*Directory in which temporary files are left.
You can make this `/tmp' if your TEXINPUTS has no relative directories in it
and you don't try to apply \\[tex-region] or \\[tex-buffer] when there are
`\\input' commands with relative directories.")

(defvar tex-offer-save t "\
*If non-nil, ask about saving modified buffers before \\[tex-file] is run.")

(defvar tex-run-command "tex" "\
*Command used to run TeX subjob.
If this string contains an asterisk (`*'), that is replaced by the file name;
otherwise, the file name, preceded by blank, is added at the end.")

(defvar latex-run-command "latex" "\
*Command used to run LaTeX subjob.
If this string contains an asterisk (`*'), that is replaced by the file name;
otherwise, the file name, preceded by blank, is added at the end.")

(defvar latex-block-names nil "\
*User defined LaTeX block names.
Combined with `standard-latex-block-names' for minibuffer completion.")

(defvar slitex-run-command "slitex" "\
*Command used to run SliTeX subjob.
If this string contains an asterisk (`*'), that is replaced by the file name;
otherwise, the file name, preceded by blank, is added at the end.")

(defvar tex-bibtex-command "bibtex" "\
*Command used by `tex-bibtex-file' to gather bibliographic data.
If this string contains an asterisk (`*'), that is replaced by the file name;
otherwise, the file name, preceded by blank, is added at the end.")

(defvar tex-dvi-print-command "lpr -d" "\
*Command used by \\[tex-print] to print a .dvi file.
If this string contains an asterisk (`*'), that is replaced by the file name;
otherwise, the file name, preceded by blank, is added at the end.")

(defvar tex-alt-dvi-print-command "lpr -d" "\
*Command used by \\[tex-print] with a prefix arg to print a .dvi file.
If this string contains an asterisk (`*'), that is replaced by the file name;
otherwise, the file name, preceded by blank, is added at the end.

If two printers are not enough of a choice, you can set the variable
`tex-alt-dvi-print-command' to an expression that asks what you want;
for example,

    (setq tex-alt-dvi-print-command
         '(format \"lpr -P%s\" (read-string \"Use printer: \")))

would tell \\[tex-print] with a prefix argument to ask you which printer to
use.")

(defvar tex-dvi-view-command nil "\
*Command used by \\[tex-view] to display a `.dvi' file.
If this string contains an asterisk (`*'), that is replaced by the file name;
otherwise, the file name, preceded by blank, is added at the end.

This can be set conditionally so that the previewer used is suitable for the
window system being used.  For example,

    (setq tex-dvi-view-command
          (if (eq window-system 'x) \"xdvi\" \"dvi2tty * | cat -s\"))

would tell \\[tex-view] to use xdvi under X windows and to use dvi2tty
otherwise.")

(defvar tex-show-queue-command "lpq" "\
*Command used by \\[tex-show-print-queue] to show the print queue.
Should show the queue(s) that \\[tex-print] puts jobs on.")

(defvar tex-default-mode (quote plain-tex-mode) "\
*Mode to enter for a new file that might be either TeX or LaTeX.
This variable is used when it can't be determined whether the file
is plain TeX or LaTeX or what because the file contains no commands.
Normally set to either `plain-tex-mode' or `latex-mode'.")

(defvar tex-open-quote "``" "\
*String inserted by typing \\[tex-insert-quote] to open a quotation.")

(defvar tex-close-quote "''" "\
*String inserted by typing \\[tex-insert-quote] to close a quotation.")

(autoload (quote tex-mode) "tex-mode" "\
Major mode for editing files of input for TeX, LaTeX, or SliTeX.
Tries to determine (by looking at the beginning of the file) whether
this file is for plain TeX, LaTeX, or SliTeX and calls `plain-tex-mode',
`latex-mode', or `slitex-mode', respectively.  If it cannot be determined,
such as if there are no commands in the file, the value of `tex-default-mode'
says which mode to use." t nil)

(defalias (quote TeX-mode) (quote tex-mode))

(defalias (quote LaTeX-mode) (quote latex-mode))

(autoload (quote plain-tex-mode) "tex-mode" "\
Major mode for editing files of input for plain TeX.
Makes $ and } display the characters they match.
Makes \" insert `` when it seems to be the beginning of a quotation,
and '' when it appears to be the end; it inserts \" only after a \\.

Use \\[tex-region] to run TeX on the current region, plus a \"header\"
copied from the top of the file (containing macro definitions, etc.),
running TeX under a special subshell.  \\[tex-buffer] does the whole buffer.
\\[tex-file] saves the buffer and then processes the file.
\\[tex-print] prints the .dvi file made by any of these.
\\[tex-view] previews the .dvi file made by any of these.
\\[tex-bibtex-file] runs bibtex on the file of the current buffer.

Use \\[validate-tex-buffer] to check buffer for paragraphs containing
mismatched $'s or braces.

Special commands:
\\{tex-mode-map}

Mode variables:
tex-run-command
	Command string used by \\[tex-region] or \\[tex-buffer].
tex-directory
	Directory in which to create temporary files for TeX jobs
	run by \\[tex-region] or \\[tex-buffer].
tex-dvi-print-command
	Command string used by \\[tex-print] to print a .dvi file.
tex-alt-dvi-print-command
	Alternative command string used by \\[tex-print] (when given a prefix
	argument) to print a .dvi file.
tex-dvi-view-command
	Command string used by \\[tex-view] to preview a .dvi file.
tex-show-queue-command
	Command string used by \\[tex-show-print-queue] to show the print
	queue that \\[tex-print] put your job on.

Entering Plain-tex mode runs the hook `text-mode-hook', then the hook
`tex-mode-hook', and finally the hook `plain-tex-mode-hook'.  When the
special subshell is initiated, the hook `tex-shell-hook' is run." t nil)

(defalias (quote plain-TeX-mode) (quote plain-tex-mode))

(autoload (quote latex-mode) "tex-mode" "\
Major mode for editing files of input for LaTeX.
Makes $ and } display the characters they match.
Makes \" insert `` when it seems to be the beginning of a quotation,
and '' when it appears to be the end; it inserts \" only after a \\.

Use \\[tex-region] to run LaTeX on the current region, plus the preamble
copied from the top of the file (containing \\documentstyle, etc.),
running LaTeX under a special subshell.  \\[tex-buffer] does the whole buffer.
\\[tex-file] saves the buffer and then processes the file.
\\[tex-print] prints the .dvi file made by any of these.
\\[tex-view] previews the .dvi file made by any of these.
\\[tex-bibtex-file] runs bibtex on the file of the current buffer.

Use \\[validate-tex-buffer] to check buffer for paragraphs containing
mismatched $'s or braces.

Special commands:
\\{tex-mode-map}

Mode variables:
latex-run-command
	Command string used by \\[tex-region] or \\[tex-buffer].
tex-directory
	Directory in which to create temporary files for LaTeX jobs
	run by \\[tex-region] or \\[tex-buffer].
tex-dvi-print-command
	Command string used by \\[tex-print] to print a .dvi file.
tex-alt-dvi-print-command
	Alternative command string used by \\[tex-print] (when given a prefix
	argument) to print a .dvi file.
tex-dvi-view-command
	Command string used by \\[tex-view] to preview a .dvi file.
tex-show-queue-command
	Command string used by \\[tex-show-print-queue] to show the print
	queue that \\[tex-print] put your job on.

Entering Latex mode runs the hook `text-mode-hook', then 
`tex-mode-hook', and finally `latex-mode-hook'.  When the special
subshell is initiated, `tex-shell-hook' is run." t nil)

(autoload (quote slitex-mode) "tex-mode" "\
Major mode for editing files of input for SliTeX.
Makes $ and } display the characters they match.
Makes \" insert `` when it seems to be the beginning of a quotation,
and '' when it appears to be the end; it inserts \" only after a \\.

Use \\[tex-region] to run SliTeX on the current region, plus the preamble
copied from the top of the file (containing \\documentstyle, etc.),
running SliTeX under a special subshell.  \\[tex-buffer] does the whole buffer.
\\[tex-file] saves the buffer and then processes the file.
\\[tex-print] prints the .dvi file made by any of these.
\\[tex-view] previews the .dvi file made by any of these.
\\[tex-bibtex-file] runs bibtex on the file of the current buffer.

Use \\[validate-tex-buffer] to check buffer for paragraphs containing
mismatched $'s or braces.

Special commands:
\\{tex-mode-map}

Mode variables:
slitex-run-command
	Command string used by \\[tex-region] or \\[tex-buffer].
tex-directory
	Directory in which to create temporary files for SliTeX jobs
	run by \\[tex-region] or \\[tex-buffer].
tex-dvi-print-command
	Command string used by \\[tex-print] to print a .dvi file.
tex-alt-dvi-print-command
	Alternative command string used by \\[tex-print] (when given a prefix
	argument) to print a .dvi file.
tex-dvi-view-command
	Command string used by \\[tex-view] to preview a .dvi file.
tex-show-queue-command
	Command string used by \\[tex-show-print-queue] to show the print
	queue that \\[tex-print] put your job on.

Entering SliTeX mode runs the hook `text-mode-hook', then the hook
`tex-mode-hook', then the hook `latex-mode-hook', and finally the hook
`slitex-mode-hook'.  When the special subshell is initiated, the hook
`tex-shell-hook' is run." t nil)

(autoload (quote tex-start-shell) "tex-mode" nil nil nil)

;;;***

;;;### (autoloads (texinfo-format-region texinfo-format-buffer) "texinfmt" "texinfmt.el" (12778 43266))
;;; Generated autoloads from texinfmt.el

(autoload (quote texinfo-format-buffer) "texinfmt" "\
Process the current buffer as texinfo code, into an Info file.
The Info file output is generated in a buffer visiting the Info file
names specified in the @setfilename command.

Non-nil argument (prefix, if interactive) means don't make tag table
and don't split the file if large.  You can use Info-tagify and
Info-split to do these manually." t nil)

(autoload (quote texinfo-format-region) "texinfmt" "\
Convert the current region of the Texinfo file to Info format.
This lets you see what that part of the file will look like in Info.
The command is bound to \\[texinfo-format-region].  The text that is
converted to Info is stored in a temporary buffer." t nil)

;;;***

;;;### (autoloads (texinfo-mode) "texinfo" "texinfo.el" (12604 46234))
;;; Generated autoloads from texinfo.el

(autoload (quote texinfo-mode) "texinfo" "\
Major mode for editing Texinfo files.

  It has these extra commands:
\\{texinfo-mode-map}

  These are files that are used as input for TeX to make printed manuals
and also to be turned into Info files with \\[makeinfo-buffer] or
the `makeinfo' program.  These files must be written in a very restricted and
modified version of TeX input format.

  Editing commands are like text-mode except that the syntax table is
set up so expression commands skip Texinfo bracket groups.  To see
what the Info version of a region of the Texinfo file will look like,
use \\[makeinfo-region], which runs `makeinfo' on the current region.

  You can show the structure of a Texinfo file with \\[texinfo-show-structure].
This command shows the structure of a Texinfo file by listing the
lines with the @-sign commands for @chapter, @section, and the like.
These lines are displayed in another window called the *Occur* window.
In that window, you can position the cursor over one of the lines and
use \\[occur-mode-goto-occurrence], to jump to the corresponding spot
in the Texinfo file.

  In addition, Texinfo mode provides commands that insert various
frequently used @-sign commands into the buffer.  You can use these
commands to save keystrokes.  And you can insert balanced braces with
\\[texinfo-insert-braces] and later use the command \\[up-list] to
move forward past the closing brace.

Also, Texinfo mode provides functions for automatically creating or
updating menus and node pointers.  These functions

  * insert the `Next', `Previous' and `Up' pointers of a node,
  * insert or update the menu for a section, and
  * create a master menu for a Texinfo source file.

Here are the functions:

    texinfo-update-node                \\[texinfo-update-node]
    texinfo-every-node-update          \\[texinfo-every-node-update]
    texinfo-sequential-node-update 

    texinfo-make-menu                  \\[texinfo-make-menu]
    texinfo-all-menus-update           \\[texinfo-all-menus-update]
    texinfo-master-menu

    texinfo-indent-menu-description (column &optional region-p)

The `texinfo-column-for-description' variable specifies the column to
which menu descriptions are indented. 

Passed an argument (a prefix argument, if interactive), the
`texinfo-update-node' and `texinfo-make-menu' functions do their jobs
in the region.

To use the updating commands, you must structure your Texinfo file
hierarchically, such that each `@node' line, with the exception of the
Top node, is accompanied by some kind of section line, such as an
`@chapter' or `@section' line.

If the file has a `top' node, it must be called `top' or `Top' and
be the first node in the file.

Entering Texinfo mode calls the value of text-mode-hook, and then the
value of texinfo-mode-hook." t nil)

;;;***

;;;### (autoloads (texinfo-sequential-node-update texinfo-every-node-update texinfo-update-node) "texnfo-upd" "texnfo-upd.el" (12730 54418))
;;; Generated autoloads from texnfo-upd.el

(autoload (quote texinfo-update-node) "texnfo-upd" "\
Without any prefix argument, update the node in which point is located.
Non-nil argument (prefix, if interactive) means update the nodes in the
marked region.

The functions for creating or updating nodes and menus, and their
keybindings, are:

    texinfo-update-node (&optional region-p)    \\[texinfo-update-node]
    texinfo-every-node-update ()                \\[texinfo-every-node-update]
    texinfo-sequential-node-update (&optional region-p)

    texinfo-make-menu (&optional region-p)      \\[texinfo-make-menu]
    texinfo-all-menus-update ()                 \\[texinfo-all-menus-update]
    texinfo-master-menu ()

    texinfo-indent-menu-description (column &optional region-p)

The `texinfo-column-for-description' variable specifies the column to
which menu descriptions are indented. Its default value is 32." t nil)

(autoload (quote texinfo-every-node-update) "texnfo-upd" "\
Update every node in a Texinfo file." t nil)

(autoload (quote texinfo-sequential-node-update) "texnfo-upd" "\
Update one node (or many) in a Texinfo file with sequential pointers.

This function causes the `Next' or `Previous' pointer to point to the
immediately preceding or following node, even if it is at a higher or
lower hierarchical level in the document.  Continually pressing `n' or
`p' takes you straight through the file.

Without any prefix argument, update the node in which point is located.
Non-nil argument (prefix, if interactive) means update the nodes in the
marked region.

This command makes it awkward to navigate among sections and
subsections; it should be used only for those documents that are meant
to be read like a novel rather than a reference, and for which the
Info `g*' command is inadequate." t nil)

;;;***

;;;### (autoloads (thai-compose-region thai-compose-buffer) "thai" "thai.el" (12271 28693))
;;; Generated autoloads from thai.el

(autoload (quote thai-compose-buffer) "thai" "\
Compose Thai characters in the current buffer." t nil)

(autoload (quote thai-compose-region) "thai" "\
Compose Thai characters in the region." t nil)

;;;***

;;;### (autoloads (thing-at-point bounds-of-thing-at-point forward-thing) "thingatpt" "thingatpt.el" (12545 51868))
;;; Generated autoloads from thingatpt.el

(autoload (quote forward-thing) "thingatpt" "\
Move forward to the end of the next THING." nil nil)

(autoload (quote bounds-of-thing-at-point) "thingatpt" "\
Determine the start and end buffer locations for the THING at point,
where THING is an entity for which there is a either a corresponding
forward-THING operation, or corresponding beginning-of-THING and
end-of-THING operations, eg. 'word, 'sentence, 'defun.
  Return a cons cell '(start . end) giving the start and end positions." nil nil)

(autoload (quote thing-at-point) "thingatpt" "\
Return the THING at point, where THING is an entity defined by
bounds-of-thing-at-point." nil nil)

;;;***

;;;### (autoloads (display-time) "time" "time.el" (12786 35123))
;;; Generated autoloads from time.el

(defvar display-time-day-and-date nil "\
*Non-nil means \\[display-time] should display day and date as well as time.")

(autoload (quote display-time) "time" "\
Display current time, load level, and mail flag in mode line of each buffer.
Updates automatically every minute.
If `display-time-day-and-date' is non-nil, the current day and date
are displayed as well.
After each update, `display-time-hook' is run with `run-hooks'." t nil)

;;;***

;;;### (autoloads (time-stamp-toggle-active time-stamp) "time-stamp" "time-stamp.el" (12575 63026))
;;; Generated autoloads from time-stamp.el

(autoload (quote time-stamp) "time-stamp" "\
Update the time stamp string in the buffer.
If you put a time stamp template anywhere in the first 8 lines of a file,
it can be updated every time you save the file.  See the top of
`time-stamp.el' for a sample.  The template looks like one of the following:
    Time-stamp: <>
    Time-stamp: \" \"
The time stamp is written between the brackets or quotes, resulting in
    Time-stamp: <95/01/18 10:20:51 gildea>
Only does its thing if the variable  time-stamp-active  is non-nil.
Typically used on  write-file-hooks  for automatic time-stamping.
The format of the time stamp is determined by the variable  time-stamp-format.
The variables time-stamp-line-limit, time-stamp-start, and time-stamp-end
control finding the template." t nil)

(autoload (quote time-stamp-toggle-active) "time-stamp" "\
Toggle time-stamp-active, setting whether \\[time-stamp] updates a buffer.
With arg, turn time stamping on if and only if arg is positive." t nil)

;;;***

;;;### (autoloads (with-timeout run-with-idle-timer add-timeout run-with-timer run-at-time) "timer" "timer.el" (12643 64076))
;;; Generated autoloads from timer.el

(autoload (quote run-at-time) "timer" "\
Perform an action after a delay of SECS seconds.
Repeat the action every REPEAT seconds, if REPEAT is non-nil.
TIME should be a string like \"11:23pm\", nil meaning now, a number of seconds
from now, or a value from `encode-time'.
REPEAT may be an integer or floating point number.
The action is to call FUNCTION with arguments ARGS.

This function returns a timer object which you can use in `cancel-timer'." t nil)

(autoload (quote run-with-timer) "timer" "\
Perform an action after a delay of SECS seconds.
Repeat the action every REPEAT seconds, if REPEAT is non-nil.
SECS and REPEAT may be integers or floating point numbers.
The action is to call FUNCTION with arguments ARGS.

This function returns a timer object which you can use in `cancel-timer'." t nil)

(autoload (quote add-timeout) "timer" "\
Add a timer to run SECS seconds from now, to call FUNCTION on OBJECT.
If REPEAT is non-nil, repeat the timer every REPEAT seconds.
This function is for compatibility; see also `run-with-timer'." nil nil)

(autoload (quote run-with-idle-timer) "timer" "\
Perform an action the next time Emacs is idle for SECS seconds.
If REPEAT is non-nil, do this each time Emacs is idle for SECS seconds.
SECS may be an integer or a floating point number.
The action is to call FUNCTION with arguments ARGS.

This function returns a timer object which you can use in `cancel-timer'." t nil)
 (put 'with-timeout 'lisp-indent-function 1)

(autoload (quote with-timeout) "timer" "\
Run BODY, but if it doesn't finish in SECONDS seconds, give up.
If we give up, we run the TIMEOUT-FORMS and return the value of the last one.
The call should look like:
 (with-timeout (SECONDS TIMEOUT-FORMS...) BODY...)
The timeout is checked whenever Emacs waits for some kind of external
event (such as keyboard input, input from subprocesses, or a certain time);
if the program loops without waiting in any way, the timeout will not
be detected." nil (quote macro))

;;;***

;;;### (autoloads (tmm-prompt tmm-menubar-mouse tmm-menubar) "tmm" "tmm.el" (12755 34696))
;;; Generated autoloads from tmm.el
 (define-key global-map "\M-`" 'tmm-menubar)
 (define-key global-map [f10] 'tmm-menubar)
 (define-key global-map [menu-bar mouse-1] 'tmm-menubar-mouse)

(autoload (quote tmm-menubar) "tmm" "\
Text-mode emulation of looking and choosing from a menubar.
See the documentation for `tmm-prompt'.
X-POSITION, if non-nil, specifies a horizontal position within the menu bar;
we make that menu bar item (the one at that position) the default choice." t nil)

(autoload (quote tmm-menubar-mouse) "tmm" "\
Text-mode emulation of looking and choosing from a menubar.
This command is used when you click the mouse in the menubar
on a console which has no window system but does have a mouse.
See the documentation for `tmm-prompt'." t nil)

(autoload (quote tmm-prompt) "tmm" "\
Text-mode emulation of calling the bindings in keymap.
Creates a text-mode menu of possible choices.  You can access the elements
in the menu in two ways:
   *)  via history mechanism from minibuffer;
   *)  Or via completion-buffer that is automatically shown.
The last alternative is currently a hack, you cannot use mouse reliably.

MENU is like the MENU argument to `x-popup-menu': either a
keymap or an alist of alists.
DEFAULT-ITEM, if non-nil, specifies an initial default choice.
Its value should be an event that has a binding in MENU." nil nil)

;;;***

;;;### (autoloads (tpu-edt-on) "tpu-edt" "tpu-edt.el" (12594 16832))
;;; Generated autoloads from tpu-edt.el

(fset (quote tpu-edt-mode) (quote tpu-edt-on))

(fset (quote tpu-edt) (quote tpu-edt-on))

(autoload (quote tpu-edt-on) "tpu-edt" "\
Turn on TPU/edt emulation." t nil)

;;;***

;;;### (autoloads (tpu-set-cursor-bound tpu-set-cursor-free tpu-set-scroll-margins) "tpu-extras" "tpu-extras.el" (12545 51876))
;;; Generated autoloads from tpu-extras.el

(autoload (quote tpu-set-scroll-margins) "tpu-extras" "\
Set scroll margins." t nil)

(autoload (quote tpu-set-cursor-free) "tpu-extras" "\
Allow the cursor to move freely about the screen." t nil)

(autoload (quote tpu-set-cursor-bound) "tpu-extras" "\
Constrain the cursor to the flow of the text." t nil)

;;;***

;;;### (autoloads (tq-create) "tq" "tq.el" (12575 63036))
;;; Generated autoloads from tq.el

(autoload (quote tq-create) "tq" "\
Create and return a transaction queue communicating with PROCESS.
PROCESS should be a subprocess capable of sending and receiving
streams of bytes.  It may be a local process, or it may be connected
to a tcp server on another machine." nil nil)

;;;***

;;;### (autoloads (trace-function-background trace-function) "trace" "trace.el" (12545 51879))
;;; Generated autoloads from trace.el

(defvar trace-buffer "*trace-output*" "\
*Trace output will by default go to that buffer.")

(autoload (quote trace-function) "trace" "\
Traces FUNCTION with trace output going to BUFFER.
For every call of FUNCTION Lisp-style trace messages that display argument
and return values will be inserted into BUFFER. This function generates the
trace advice for FUNCTION and activates it together with any other advice
there might be!! The trace BUFFER will popup whenever FUNCTION is called.
Do not use this to trace functions that switch buffers or do any other
display oriented stuff, use `trace-function-background' instead." t nil)

(autoload (quote trace-function-background) "trace" "\
Traces FUNCTION with trace output going quietly to BUFFER.
For every call of FUNCTION Lisp-style trace messages that display argument
and return values will be inserted into BUFFER. This function generates the
trace advice for FUNCTION and activates it together with any other advice
there might be!! Trace output will quietly go to BUFFER without changing
the window or buffer configuration at all." t nil)

;;;***

;;;### (autoloads (define-word-regexp regexp-word-compile regexp-compile) "trex" "trex.el" (12436 56673))
;;; Generated autoloads from trex.el

(autoload (quote regexp-compile) "trex" nil nil nil)

(autoload (quote regexp-word-compile) "trex" nil nil nil)

(autoload (quote define-word-regexp) "trex" nil nil (quote macro))

;;;***

;;;### (autoloads (2C-split 2C-associate-buffer 2C-two-columns) "two-column" "two-column.el" (12458 50840))
;;; Generated autoloads from two-column.el
 (autoload '2C-command "two-column" () t 'keymap)

(global-set-key "6" (quote 2C-command))

(global-set-key [f2] (quote 2C-command))

(autoload (quote 2C-two-columns) "two-column" "\
Split current window vertically for two-column editing.
When called the first time, associates a buffer with the current
buffer in two-column minor mode (see  \\[describe-mode] ).
Runs `2C-other-buffer-hook' in the new buffer.
When called again, restores the screen layout with the current buffer
first and the associated buffer to it's right." t nil)

(autoload (quote 2C-associate-buffer) "two-column" "\
Associate another buffer with this one in two-column minor mode.
Can also be used to associate a just previously visited file, by
accepting the proposed default buffer.

\(See  \\[describe-mode] .)" t nil)

(autoload (quote 2C-split) "two-column" "\
Split a two-column text at point, into two buffers in two-column minor mode.
Point becomes the local value of `2C-window-width'.  Only lines that
have the ARG same preceding characters at that column get split.  The
ARG preceding characters without any leading whitespace become the local
value for `2C-separator'.  This way lines that continue across both
columns remain untouched in the first buffer.

This function can be used with a prototype line, to set up things.  You
write the first line of each column and then split that line.  E.g.:

First column's text    sSs  Second column's text
		       \\___/\\
			/    \\
   5 character Separator      You type  M-5 \\[2C-split]  with the point here.

\(See  \\[describe-mode] .)" t nil)

;;;***

;;;### (autoloads (type-break-guesstimate-keystroke-threshold type-break-statistics type-break type-break-mode) "type-break" "type-break.el" (12785 6539))
;;; Generated autoloads from type-break.el

(defvar type-break-mode nil "\
*Non-`nil' means typing break mode is enabled.
See the docstring for the `type-break-mode' command for more information.")

(defvar type-break-interval (* 60 60) "\
*Number of seconds between scheduled typing breaks.")

(defvar type-break-good-rest-interval (/ type-break-interval 6) "\
*Number of seconds of idle time considered to be an adequate typing rest.

When this variable is non-`nil', emacs checks the idle time between
keystrokes.  If this idle time is long enough to be considered a \"good\"
rest from typing, then the next typing break is simply rescheduled for later.

If a break is interrupted before this much time elapses, the user will be
asked whether or not really to interrupt the break.")

(defvar type-break-keystroke-threshold (let* ((wpm 35) (avg-word-length 5) (upper (* wpm avg-word-length (/ type-break-interval 60))) (lower (/ upper 5))) (cons lower upper)) "\
*Upper and lower bound on number of keystrokes for considering typing break.
This structure is a pair of numbers.

The first number is the minimum number of keystrokes that must have been
entered since the last typing break before considering another one, even if
the scheduled time has elapsed; the break is simply rescheduled until later
if the minimum threshold hasn't been reached.  If this first value is nil,
then there is no minimum threshold; as soon as the scheduled time has
elapsed, the user will always be queried.

The second number is the maximum number of keystrokes that can be entered
before a typing break is requested immediately, pre-empting the originally
scheduled break.  If this second value is nil, then no pre-emptive breaks
will occur; only scheduled ones will.

Keys with bucky bits (shift, control, meta, etc) are counted as only one
keystroke even though they really require multiple keys to generate them.

The command `type-break-guesstimate-keystroke-threshold' can be used to
guess a reasonably good pair of values for this variable.")

(autoload (quote type-break-mode) "type-break" "\
Enable or disable typing-break mode.
This is a minor mode, but it is global to all buffers by default.

When this mode is enabled, the user is encouraged to take typing breaks at
appropriate intervals; either after a specified amount of time or when the
user has exceeded a keystroke threshold.  When the time arrives, the user
is asked to take a break.  If the user refuses at that time, emacs will ask
again in a short period of time.  The idea is to give the user enough time
to find a good breaking point in his or her work, but be sufficiently
annoying to discourage putting typing breaks off indefinitely.

A negative prefix argument disables this mode.
No argument or any non-negative argument enables it.

The user may enable or disable this mode by setting the variable of the
same name, though setting it in that way doesn't reschedule a break or
reset the keystroke counter.

If the mode was previously disabled and is enabled as a consequence of
calling this function, it schedules a break with `type-break-schedule' to
make sure one occurs (the user can call that command to reschedule the
break at any time).  It also initializes the keystroke counter.

The variable `type-break-interval' specifies the number of seconds to
schedule between regular typing breaks.  This variable doesn't directly
affect the time schedule; it simply provides a default for the
`type-break-schedule' command.

If set, the variable `type-break-good-rest-interval' specifies the minimum
amount of time which is considered a reasonable typing break.  Whenever
that time has elapsed, typing breaks are automatically rescheduled for
later even if emacs didn't prompt you to take one first.  Also, if a break
is ended before this much time has elapsed, the user will be asked whether
or not to continue.

The variable `type-break-keystroke-threshold' is used to determine the
thresholds at which typing breaks should be considered.  You can use
the command `type-break-guesstimate-keystroke-threshold' to try to
approximate good values for this.

There are several variables that affect how or when warning messages about
imminent typing breaks are displayed.  They include:

        type-break-warning-message-mode
        type-break-time-warning-intervals
        type-break-keystroke-warning-intervals
        type-break-warning-repeat
        type-break-warning-countdown-string
        type-break-warning-countdown-string-type

There are several variables that affect how and when queries to begin a
typing break occur.  They include:

        type-break-query-function
        type-break-query-interval

Finally, the command `type-break-statistics' prints interesting things." t nil)

(autoload (quote type-break) "type-break" "\
Take a typing break.

During the break, a demo selected from the functions listed in
`type-break-demo-functions' is run.

After the typing break is finished, the next break is scheduled
as per the function `type-break-schedule'." t nil)

(autoload (quote type-break-statistics) "type-break" "\
Print statistics about typing breaks in a temporary buffer.
This includes the last time a typing break was taken, when the next one is
scheduled, the keystroke thresholds and the current keystroke count, etc." t nil)

(autoload (quote type-break-guesstimate-keystroke-threshold) "type-break" "\
Guess values for the minimum/maximum keystroke threshold for typing breaks.

If called interactively, the user is prompted for their guess as to how
many words per minute they usually type.  This value should not be your
maximum WPM, but your average.  Of course, this is harder to gauge since it
can vary considerably depending on what you are doing.  For example, one
tends actually to type less when debugging a program, as opposed to writing
documentation.  (Perhaps a separate program should be written to estimate
average typing speed.)

From that, this command sets the values in `type-break-keystroke-threshold'
based on a fairly simple algorithm involving assumptions about the average
length of words (5).  For the minimum threshold, it uses about a fifth of
the computed maximum threshold.

When called from lisp programs, the optional args WORDLEN and FRAC can be
used to override the default assumption about average word length and the
fraction of the maximum threshold to which to set the minimum threshold.
FRAC should be the inverse of the fractional value; for example, a value of
2 would mean to use one half, a value of 4 would mean to use one quarter, etc." t nil)

;;;***

;;;### (autoloads (ununderline-region underline-region) "underline" "underline.el" (12545 51883))
;;; Generated autoloads from underline.el

(autoload (quote underline-region) "underline" "\
Underline all nonblank characters in the region.
Works by overstriking underscores.
Called from program, takes two arguments START and END
which specify the range to operate on." t nil)

(autoload (quote ununderline-region) "underline" "\
Remove all underlining (overstruck underscores) in the region.
Called from program, takes two arguments START and END
which specify the range to operate on." t nil)

;;;***

;;;### (autoloads (unrmail batch-unrmail) "unrmail" "unrmail.el" (12575 63042))
;;; Generated autoloads from unrmail.el

(autoload (quote batch-unrmail) "unrmail" "\
Convert Rmail files to system inbox format.
Specify the input Rmail file names as command line arguments.
For each Rmail file, the corresponding output file name
is made by adding `.mail' at the end.
For example, invoke `emacs -batch -f batch-unrmail RMAIL'." nil nil)

(autoload (quote unrmail) "unrmail" "\
Convert Rmail file FILE to system inbox format file TO-FILE." t nil)

;;;***

;;;### (autoloads (ask-user-about-supersession-threat ask-user-about-lock) "userlock" "userlock.el" (12757 35884))
;;; Generated autoloads from userlock.el

(autoload (quote ask-user-about-lock) "userlock" "\
Ask user what to do when he wants to edit FILE but it is locked by USER.
This function has a choice of three things to do:
  do (signal 'buffer-file-locked (list FILE USER))
    to refrain from editing the file
  return t (grab the lock on the file)
  return nil (edit the file even though it is locked).
You can rewrite it to use any criterion you like to choose which one to do." nil nil)

(autoload (quote ask-user-about-supersession-threat) "userlock" "\
Ask a user who is about to modify an obsolete buffer what to do.
This function has two choices: it can return, in which case the modification
of the buffer will proceed, or it can (signal 'file-supersession (file)),
in which case the proposed buffer modification will not be made.

You can rewrite this to use any criterion you like to choose which one to do.
The buffer in question is current when this function is called." nil nil)

;;;***

;;;### (autoloads (vc-update-change-log vc-rename-file vc-cancel-version vc-revert-buffer vc-print-log vc-retrieve-snapshot vc-create-snapshot vc-directory vc-insert-headers vc-version-other-window vc-diff vc-register vc-next-action) "vc" "vc.el" (12793 14043))
;;; Generated autoloads from vc.el

(defvar vc-checkin-hook nil "\
*List of functions called after a checkin is done.  See `run-hooks'.")

(autoload (quote vc-next-action) "vc" "\
Do the next logical checkin or checkout operation on the current file.
   If you call this from within a VC dired buffer with no files marked,
it will operate on the file in the current line.
   If you call this from within a VC dired buffer, and one or more
files are marked, it will accept a log message and then operate on
each one.  The log message will be used as a comment for any register
or checkin operations, but ignored when doing checkouts.  Attempted
lock steals will raise an error.
   A prefix argument lets you specify the version number to use.

For RCS and SCCS files:
   If the file is not already registered, this registers it for version
control and then retrieves a writable, locked copy for editing.
   If the file is registered and not locked by anyone, this checks out
a writable and locked file ready for editing.
   If the file is checked out and locked by the calling user, this
first checks to see if the file has changed since checkout.  If not,
it performs a revert.
   If the file has been changed, this pops up a buffer for entry
of a log message; when the message has been entered, it checks in the
resulting changes along with the log message as change commentary.  If
the variable `vc-keep-workfiles' is non-nil (which is its default), a
read-only copy of the changed file is left in place afterwards.
   If the file is registered and locked by someone else, you are given
the option to steal the lock.

For CVS files:
   If the file is not already registered, this registers it for version
control.  This does a \"cvs add\", but no \"cvs commit\".
   If the file is added but not committed, it is committed.
   If your working file is changed, but the repository file is
unchanged, this pops up a buffer for entry of a log message; when the
message has been entered, it checks in the resulting changes along
with the logmessage as change commentary.  A writable file is retained.
   If the repository file is changed, you are asked if you want to
merge in the changes into your working copy." t nil)

(autoload (quote vc-register) "vc" "\
Register the current file into your version-control system." t nil)

(autoload (quote vc-diff) "vc" "\
Display diffs between file versions.
Normally this compares the current file and buffer with the most recent 
checked in version of that file.  This uses no arguments.
With a prefix argument, it reads the file name to use
and two version designators specifying which versions to compare." t nil)

(autoload (quote vc-version-other-window) "vc" "\
Visit version REV of the current buffer in another window.
If the current buffer is named `F', the version is named `F.~REV~'.
If `F.~REV~' already exists, it is used instead of being re-created." t nil)

(autoload (quote vc-insert-headers) "vc" "\
Insert headers in a file for use with your version-control system.
Headers desired are inserted at the start of the buffer, and are pulled from
the variable `vc-header-alist'." t nil)

(autoload (quote vc-directory) "vc" "\
Show version-control status of the current directory and subdirectories.
Normally it creates a Dired buffer that lists only the locked files
in all these directories.  With a prefix argument, it lists all files." t nil)

(autoload (quote vc-create-snapshot) "vc" "\
Make a snapshot called NAME.
The snapshot is made from all registered files at or below the current
directory.  For each file, the version level of its latest
version becomes part of the named configuration." t nil)

(autoload (quote vc-retrieve-snapshot) "vc" "\
Retrieve the snapshot called NAME.
This function fails if any files are locked at or below the current directory
Otherwise, all registered files are checked out (unlocked) at their version
levels in the snapshot." t nil)

(autoload (quote vc-print-log) "vc" "\
List the change log of the current buffer in a window." t nil)

(autoload (quote vc-revert-buffer) "vc" "\
Revert the current buffer's file back to the latest checked-in version.
This asks for confirmation if the buffer contents are not identical
to that version.
If the back-end is CVS, this will give you the most recent revision of
the file on the branch you are editing." t nil)

(autoload (quote vc-cancel-version) "vc" "\
Get rid of most recently checked in version of this file.
A prefix argument means do not revert the buffer afterwards." t nil)

(autoload (quote vc-rename-file) "vc" "\
Rename file OLD to NEW, and rename its master file likewise." t nil)

(autoload (quote vc-update-change-log) "vc" "\
Find change log file and add entries from recent RCS logs.
The mark is left at the end of the text prepended to the change log.
With prefix arg of C-u, only find log entries for the current buffer's file.
With any numeric prefix arg, find log entries for all files currently visited.
Otherwise, find log entries for all registered files in the default directory.
From a program, any arguments are passed to the `rcs2log' script." t nil)

;;;***

;;;### (autoloads (vi-mode) "vi" "vi.el" (12545 51895))
;;; Generated autoloads from vi.el

(autoload (quote vi-mode) "vi" "\
Major mode that acts like the `vi' editor.
The purpose of this mode is to provide you the combined power of vi (namely,
the \"cross product\" effect of commands and repeat last changes) and Emacs.

This command redefines nearly all keys to look like vi commands.
It records the previous major mode, and any vi command for input
\(`i', `a', `s', etc.) switches back to that mode.
Thus, ordinary Emacs (in whatever major mode you had been using)
is \"input\" mode as far as vi is concerned.

To get back into vi from \"input\" mode, you must issue this command again.
Therefore, it is recommended that you assign it to a key.

Major differences between this mode and real vi :

* Limitations and unsupported features
  - Search patterns with line offset (e.g. /pat/+3 or /pat/z.) are
    not supported.
  - Ex commands are not implemented; try ':' to get some hints.
  - No line undo (i.e. the 'U' command), but multi-undo is a standard feature.

* Modifications
  - The stopping positions for some point motion commands (word boundary,
    pattern search) are slightly different from standard 'vi'.
    Also, no automatic wrap around at end of buffer for pattern searching.
  - Since changes are done in two steps (deletion then insertion), you need
    to undo twice to completely undo a change command.  But this is not needed
    for undoing a repeated change command.
  - No need to set/unset 'magic', to search for a string with regular expr
    in it just put a prefix arg for the search commands.  Replace cmds too.
  - ^R is bound to incremental backward search, so use ^L to redraw screen.

* Extensions
  - Some standard (or modified) Emacs commands were integrated, such as
    incremental search, query replace, transpose objects, and keyboard macros.
  - In command state, ^X links to the 'ctl-x-map', and ESC can be linked to
    esc-map or set undefined.  These can give you the full power of Emacs.
  - See vi-com-map for those keys that are extensions to standard vi, e.g.
    `vi-name-last-change-or-macro', `vi-verify-spelling', `vi-locate-def',
    `vi-mark-region', and 'vi-quote-words'.  Some of them are quite handy.
  - Use \\[vi-switch-mode] to switch among different modes quickly.
  
Syntax table and abbrevs while in vi mode remain as they were in Emacs." t nil)

;;;***

;;;### (autoloads (vn-decompose-viqr-buffer vn-decompose-viqr vn-compose-viqr-buffer vn-compose-viqr) "viet" "viet.el" (12271 28693))
;;; Generated autoloads from viet.el

(autoload (quote vn-compose-viqr) "viet" "\
Convert 'VIQR' mnemonics of the current region to
pre-composed Vietnamese characaters." t nil)

(autoload (quote vn-compose-viqr-buffer) "viet" nil t nil)

(autoload (quote vn-decompose-viqr) "viet" "\
Convert pre-composed Vietnamese characaters of the current region to
'VIQR' mnemonics." t nil)

(autoload (quote vn-decompose-viqr-buffer) "viet" nil t nil)

;;;***

;;;### (autoloads (view-mode view-buffer-other-window view-buffer view-file-other-window view-file) "view" "view.el" (12784 31023))
;;; Generated autoloads from view.el

(defvar view-highlight-face (quote highlight) "\
*The overlay face used for highlighting the match found by View mode search.")

(autoload (quote view-file) "view" "\
View FILE in View mode, returning to previous buffer when done.
The usual Emacs commands are not available; instead,
a special set of commands (mostly letters and punctuation)
are defined for moving around in the buffer.
Space scrolls forward, Delete scrolls backward.
For list of all View commands, type ? or h while viewing.

This command runs the normal hook `view-mode-hook'." t nil)

(autoload (quote view-file-other-window) "view" "\
View FILE in View mode in other window.
Return to previous buffer when done.
The usual Emacs commands are not available; instead,
a special set of commands (mostly letters and punctuation)
are defined for moving around in the buffer.
Space scrolls forward, Delete scrolls backward.
For list of all View commands, type ? or h while viewing.

This command runs the normal hook `view-mode-hook'." t nil)

(autoload (quote view-buffer) "view" "\
View BUFFER in View mode, returning to previous buffer when done.
The usual Emacs commands are not available; instead,
a special set of commands (mostly letters and punctuation)
are defined for moving around in the buffer.
Space scrolls forward, Delete scrolls backward.
For list of all View commands, type ? or h while viewing.

This command runs the normal hook `view-mode-hook'." t nil)

(autoload (quote view-buffer-other-window) "view" "\
View BUFFER in View mode in another window.
Return to previous buffer when done, unless NOT-RETURN is non-nil.

The usual Emacs commands are not available in View mode; instead,
a special set of commands (mostly letters and punctuation)
are defined for moving around in the buffer.
Space scrolls forward, Delete scrolls backward.
For list of all View commands, type ? or h while viewing.

This command runs the normal hook `view-mode-hook'." t nil)

(autoload (quote view-mode) "view" "\
Toggle View mode.
With a prefix argument, turn View mode on if the argument is >= zero
and off if it is not.

If you use this function to turn on View mode, then subsequently
\"exiting\" View mode does nothing except turn View mode off.  The
other way to turn View mode on is by calling `view-mode-enter';
that is what Lisp programs usually use.

Letters do not insert themselves.  Instead these commands are provided.
Most commands take prefix arguments.  Commands dealing with lines
default to \"scroll size\" lines (initially size of window).
Search commands default to a repeat count of one.

M-< or <	move to beginning of buffer.
M-> or >	move to end of buffer.
C-v or Space	scroll forward lines.
M-v or DEL	scroll backward lines.
CR or LF	scroll forward one line (backward with prefix argument).
z		like Space except set number of lines for further
		   scrolling commands to scroll by.
C-u and Digits	provide prefix arguments.  `-' denotes negative argument.
=		prints the current line number.
g		goes to line given by prefix argument.
/ or M-C-s	searches forward for regular expression
\\ or M-C-r	searches backward for regular expression.
n		searches forward for last regular expression.
p		searches backward for last regular expression.
C-@ or .	set the mark.
x		exchanges point and mark.
C-s or s	do forward incremental search.
C-r or r	do reverse incremental search.
@ or '		return to mark and pops mark ring.
		  Mark ring is pushed at start of every
		  successful search and when jump to line to occurs.
		  The mark is set on jump to buffer start or end.
? or h		provide help message (list of commands).
\\[help-command]		provides help (list of commands or description of a command).
C-n		moves down lines vertically.
C-p		moves upward lines vertically.
C-l		recenters the screen.
q		exit view-mode and return to previous buffer." t nil)

;;;***

;;;### (autoloads (vip-mode) "vip" "vip.el" (12575 63050))
;;; Generated autoloads from vip.el

(autoload (quote vip-mode) "vip" "\
Turn on VIP emulation of VI." t nil)

;;;***

;;;### (autoloads (viper-mode) "viper" "viper.el" (12786 34058))
;;; Generated autoloads from viper.el

(autoload (quote viper-mode) "viper" "\
Turn on Viper emulation of Vi." t nil)

(defalias (quote vip-mode) (quote viper-mode))

;;;***

;;;### (autoloads (visual-mode) "visual" "visual.el" (12271 28693))
;;; Generated autoloads from visual.el

(defvar visual-mode nil "\
non-nil if in visual-mode.")

(autoload (quote visual-mode) "visual" "\
Toggle visual-mode.  With ARG, turn visual-mode on iff ARG is positive." t nil)

;;;***

;;;### (autoloads (wordstar-mode) "ws-mode" "ws-mode.el" (12545 51914))
;;; Generated autoloads from ws-mode.el

(autoload (quote wordstar-mode) "ws-mode" "\
Major mode with WordStar-like key bindings.

BUGS:
 - Help menus with WordStar commands (C-j just calls help-for-help)
   are not implemented
 - Options for search and replace
 - Show markers (C-k h) is somewhat strange
 - Search and replace (C-q a) is only available in forward direction

No key bindings beginning with ESC are installed, they will work
Emacs-like.

The key bindings are:

  C-a		backward-word
  C-b		fill-paragraph
  C-c		scroll-up-line
  C-d		forward-char
  C-e		previous-line
  C-f		forward-word
  C-g		delete-char
  C-h		backward-char
  C-i		indent-for-tab-command
  C-j		help-for-help
  C-k		ordstar-C-k-map
  C-l		ws-repeat-search
  C-n		open-line
  C-p		quoted-insert
  C-r		scroll-down-line
  C-s		backward-char
  C-t		kill-word
  C-u		keyboard-quit
  C-v		overwrite-mode
  C-w		scroll-down
  C-x		next-line
  C-y		kill-complete-line
  C-z		scroll-up

  C-k 0		ws-set-marker-0
  C-k 1		ws-set-marker-1
  C-k 2		ws-set-marker-2
  C-k 3		ws-set-marker-3
  C-k 4		ws-set-marker-4
  C-k 5		ws-set-marker-5
  C-k 6		ws-set-marker-6
  C-k 7		ws-set-marker-7
  C-k 8		ws-set-marker-8
  C-k 9		ws-set-marker-9
  C-k b		ws-begin-block
  C-k c		ws-copy-block
  C-k d		save-buffers-kill-emacs
  C-k f		find-file
  C-k h		ws-show-markers
  C-k i		ws-indent-block
  C-k k		ws-end-block
  C-k p		ws-print-block
  C-k q		kill-emacs
  C-k r		insert-file
  C-k s		save-some-buffers
  C-k t		ws-mark-word
  C-k u		ws-exdent-block
  C-k C-u	keyboard-quit
  C-k v		ws-move-block
  C-k w		ws-write-block
  C-k x		kill-emacs
  C-k y		ws-delete-block

  C-o c		wordstar-center-line
  C-o b		switch-to-buffer
  C-o j		justify-current-line
  C-o k		kill-buffer
  C-o l		list-buffers
  C-o m		auto-fill-mode
  C-o r		set-fill-column
  C-o C-u	keyboard-quit
  C-o wd	delete-other-windows
  C-o wh	split-window-horizontally
  C-o wo	other-window
  C-o wv	split-window-vertically

  C-q 0		ws-find-marker-0
  C-q 1		ws-find-marker-1
  C-q 2		ws-find-marker-2
  C-q 3		ws-find-marker-3
  C-q 4		ws-find-marker-4
  C-q 5		ws-find-marker-5
  C-q 6		ws-find-marker-6
  C-q 7		ws-find-marker-7
  C-q 8		ws-find-marker-8
  C-q 9		ws-find-marker-9
  C-q a		ws-query-replace
  C-q b		ws-to-block-begin
  C-q c		end-of-buffer
  C-q d		end-of-line
  C-q f		ws-search
  C-q k		ws-to-block-end
  C-q l		ws-undo
  C-q p		ws-last-cursorp
  C-q r		beginning-of-buffer
  C-q C-u	keyboard-quit
  C-q w		ws-last-error
  C-q y		ws-kill-eol
  C-q DEL	ws-kill-bol
" t nil)

;;;***

;;;### (autoloads (xterm-mouse-mode) "xt-mouse" "xt-mouse.el" (12724 45031))
;;; Generated autoloads from xt-mouse.el

(autoload (quote xterm-mouse-mode) "xt-mouse" "\
Toggle XTerm mouse mode.
With prefix arg, turn XTerm mouse mode on iff arg is positive.

Turn it on to use emacs mouse commands, and off to use xterm mouse commands." t nil)

;;;***

;;;### (autoloads (psychoanalyze-pinhead apropos-zippy insert-zippyism yow) "yow" "yow.el" (12545 51919))
;;; Generated autoloads from yow.el

(autoload (quote yow) "yow" "\
Return or display a random Zippy quotation.  With prefix arg, insert it." t nil)

(autoload (quote insert-zippyism) "yow" "\
Prompt with completion for a known Zippy quotation, and insert it at point." t nil)

(autoload (quote apropos-zippy) "yow" "\
Return a list of all Zippy quotes matching REGEXP.
If called interactively, display a list of matches." t nil)

(autoload (quote psychoanalyze-pinhead) "yow" "\
Zippy goes to the analyst." t nil)

;;;***

;;; Don't make backup versions of this file - most of it is generated
;;; automatically by autoload.el, and what isn't changes rarely.
;;; Local Variables:
;;; version-control: never
;;; no-byte-compile: t
;;; no-update-autoloads: t
;;; End:
;;; loaddefs.el ends here
