------------- Version 0.3.1

- new edit method. It is now possible to add voxels by clicking into the
  3d view.

- OpenGl libraries were not properly found on some UNIX systems

- solving a puzzle will trigger save warning when exiting

- fixes in new assembler
  - sometimes it found no solutions even though there were some
  - better work selection heuristic resulting in speedup in some cases
  - fix mirror problem causing calculation abort whith some mirror 
    constellations

- Joe Becker edited the whole userguide

- fix possible crash with very large grids

- build improvements
  - better crosscompilation possibilities
  - don't build table generators, when tables are up to date
  - nsis script

- add a missing symmetry for triangles

- fix a crash when having empty sphere grids in problems

- fix crash when animating a solution that has been removed by the ongoing
  solving

------------- Version 0.3.0

- a new assembly algorithm that is much faster with puzzles with many
  multipieces and that has many new possibilities for the future. The
  old onle will stay for simple puzzles because it is faster in those
  situations

- piece ranges. It is now possible to specify a range of pieces to use
  to solve the puzzle

- fix memory leak when counting assemblies

- fix some more problems with certain kind of mirror solutions

- it is now possible to keep mirror solutions, if you wish

- improvements to image export:
  - better layouting of images
  - easier adjustment of zoom level
  - generate assembly and disassemly image sequences
  - fix bug with problem selection

------------- Version 0.2.3

- fix another problem that resulted in too many solutions removed for 
  puzzles with mirrors

------------- Version 0.2.2

- fix problems with mirror solution detection that somethimes removed too
  many solutions

- fix compilation on non x86 CPUs, properly use the canonical system name
  and enable assembly functions only when the code works on that CPU

- (hopefully) fix a hanging program that sometimes occured when the prepare
  button was used

------------- Version 0.2.1

- add many new symmetry groups, many thanks to Markus Götz
  - 3 new cube groups added
  - 45+4+16 new sphere added
  - 2 triangle groups removed

- add a red - blue/green/cyan 3D mode

- fix some bugs with sphere puzzles:
  - placement browser didn't work properly
  - shapes are now centered and don't jump around when adding new spheres
  - some puzzles where unsolvable due to internal shortcommings

- add a progress display for the creation of the status window as
  calculating the information in the status window might take quite
  some time

- show the actual symmetry group number in the status window and
  "---" when the group is unknown

- when status window is open you can no longer do anything else, this
  is better because the status window is not updated when editing

- proper display of the degree symbol in the tooltips for the rotate
  buttons

- the zoom slider zooms much larger

- huge speedup in preparation time. The program used to do a lot of
  unnecessary checks at the start. Now only the required ones are
  left

- lots of internal cleanup in the gui code

- add code that comes from FLU into the source. This will make
  compilation on UNIX system easier as FLU is not a standard
  library available on many systems

- improved build system to install the documentation and leave out
  the headers for the library

- BurrTools now adds a default rule with each added colour and
  upon creation of the problem it adds rules for all defined colours

- fix an assert, when problems contained empty shapes

- the check for mirrored solutions was not always enabled when it was required
  resulting in additional solutions

- the mirror check was not able to correctly handle 2 pieces of identical
  shape. They should not be there but when they are they are now handled right

------------- Version 0.2.0

- write required base for other space grids and partially implement
  triangular prisms (no disassembling right now)

- STL (3D printer format) export. It is now possible to export cubes into a
  file suitable for 3D printer for rapid prototyping

- implement a status window that displays all kinds of useful and not so
  useful information for all the shapes in the puzzle

- new functionality for solver tab:
    - sort solutions in different ways while solving
    - sort after the solving has finished
    - remove single and multiple solutions
    - add and remove disassemblies to save memory

- give pieces a weight so that the disassembler knows which pieces have
  priority when they get moved. This way you can make the box fixed for
  the disassembly animation

- new disassembler, for complex disassemblies it is quite a bit faster and
  consumes less memory. But this will probably not show in most puzzles.
  This disassembler also never moves 2 pieces by different amounts at
  the same time, e.g Piece1 by 1 and Piece2 by 2 units. It is also finds
  now all possibilities to move groups of pieces. The old one used to
  oversee a few chances to move 2 or more pieces at the same time. This
  might slow down the disassembler when many choices exist.

- new datastructure for the disassembler. This structur should make the
  disassembler a bit faster

- new disassembly animation. This is used in the image export to produce
  image sequences where the action always takes place in the middle and
  thus is much better visible

- smaller optimisations for preparation and assembly phase (around 10%
  speed improvement)

------------- Version 0.1.9

- the fade out of pieces that are removed in the assembly animation can be
  turned on and off

- Add possibility to GUI to edit the comment included in a puzzle

- another 3 symmetry groups were missing

- fix: don't try to disassemble 1 piece puzzles

- properly exit when pressing the close x in the window header

- fix crash when removing the last colour

- the marker in the block lists is better visible

- drawing modes from PuzzleSolver3D

- ticks for the z layer selector in the grid editor

- better cursor in 3D view

- disassembler improvements (better move generation, merge, when x pieces
  move the same amount in the same direction, unmerge, when they move a
  different amount

- lots interface changes with icons from Ronald Kint-Bruynseels and many
  new functions to ease the drawing of puzzles

- independent zoom levels for the 3 tabs

- when making the piece numbers start with 1 I missed a few places

- plug a memory leak that hit when having a lot of assemblies

- make it possible to exchange shapes, problems and positions of shapes 
  inside problems without destroying found solutions

- shapes can be named. If they have a name it is used in most places, 
  where the name is useful. If no name is given shapes keep the numbers
  as usual. If you want the remove a given name just enter an empty text
  Problems are treated the same way. They don't need to have a name.

- huge speed improvement for the assembling of puzzles with many identical
  pieces. The time for JayCube, for example, dropped on my machine from
  2.5 hours to 7 minutes. The disadvantage is that you can not continue
  old saved puzzles.

- Implement "Automatic Clumps". The idea is taken from an article by Frans
  in the CFF 69. It comes from Bill Cutlers puzzle programs. The idea is
  to join cubes that always have the same state: meaning they are always
  all empty or all contain piece x or all contain piece y and so on.
  Instead of treating them one by one, they are now joined.

- Huge speed improvement in the preparation phase. This is especially
  visible to puzzle where many "false" placements of pieces are possible
  when you just look at the result shape and the piece. A "false"
  placement is a placement like the middle position in a 6 piece burr that
  can never result in a proper solution. These false placements can now
  be removed much more efficiently before the more expensive check starts
  resulting in less work for the expensive checks and in speedup.
  
- handwritten mashine level code for time important functions giving 
  another 20% speed gain for calculation intensive assemblies

- pieces are no longer minimised when a puzzle is solved. This has been
  in the program only because the program couldn't handle that properly

- fixed bug in rotation suppression. Sometimes the program would find
  rotated solutions. Even worse, that was dependent on the orientation
  of the pieces

- improvements to 3D view: no wideangle distortion when viewing big
  puzzles, no colour changes when zooming objects, slightly transparent
  pieces no longer "hide" some pieces behind them

- image export to create images of shapes, problems or solutions with
  complete assembly instructions with a few options to influence the
  resulting image(s). More development is going to come here.

- sometime loading of saved assembly states failed making a resume
  impossible, the saving was ok, there was an error when reading the
  data. So if you have files like that that didn't load properly you
  can give it a new try with this version

------------- Version 0.1.8b

- Fix Bug found by Markus Götz that made the program crash, when all 
  piece were cubes

- Fix a bug found by Primitivo Familiar Ramos. The problem- slider on 
  the solve tab didn't work

- also implement some suggestions by Primitivo: start counting from 1,
  unify tool tips, fix some spelling errors

- empty status bar when activating solve tab, as the information got 
  stale (found by Peter Knoppers)

------------- Version 0.1.8a Nov 13 2005

- when the program crashes it tries to show some information and it also
  tries to save the current puzzle into __rescue.xmpuzzle. Please follow 
  the instructions in this window and send me the information.

- when reducing show the piece that is worked on to show that something
  is going on

- Placement browser lets you see at what positions a certain piece fits
  into the resulting shape. Attention, read the documentation about this

- Documentation updates. Some of the internals are described. I was also
  able to bundle some puzzle designs with the program so that you
  have something to play with right after installing the program.
  Many thanks to the designers for allowing me to include their designs.

- Suppression of rotated and mirrored solutions. The program now
  wont find rotated and mirrored solutions any longer (at leat I hope
  that it does

- configuration file. The position of the window is saved, you can also
  toggle tooltips and switch off the light in 3D view resulting in a
  completely even and very light colors for the pieces

- better groupings. It is not possible to assign mutliple groups with a
  count to each (set of) pieces. The meaning is defined like this. There
  can be UP TO the specified number of pieces in this group. This is not
  required, but when needed it is used. This may be useful if you don't
  know which pieces belong to which group. Say you have a puzzle of n
  identical pieces and all you know is that it can be disassembled into 2
  groups but you don't know how large these groups are. Then you simply
  assign 2 groups to the pieces and in each of these 2 groups can go n-1
  pieces.

- add possibility to swap 3D view and edit grid in the shape edit tab.
  This gives you a bigger grid to edit bigger puzzles

- reverse meaning of the slider in the grid editor

- fix bug in minimise causing crash when executed on empty shapes

- solution selector can take the focus, so you can use the cursor keys
  to go through solutions

- more clean design for the grid editor, no more left and right mouse
  clicking

- some key-shortcuts: F4 toggles 3d and grid view, + and - change edit
  layer, F2 saves and F3 loads a file

- sort solutions by number of moves required the completely disassemble

- show the complete number of moves required to disassembler, and the
  level of the puzzle

- cursor for 3D-View

- Variable cubes are now normal sized cubes with a black square

- remove a color deletion problem

- when the tab was dragged so that the 3D-view became invisible (0
  pixel width) the programm abborted

------------- Version 0.1.7 Aug 19 2005

- last version missed the placement optimisations for pieces
  resulting in an eternal solving time for some more complex
  puzzles like Bill Cuttlers SM or Lovley18. This version
  switches the optimisations back on, that makes some puzzles
  a bit slower but on the other hand the solving time for some
  complex puzzles drops down considerable (from years to hours)

- huge speedup for the disassembler for puzzles that have lots of
  assemblies for EasyLiving for example only 25% of the time is left
  (time dropped from 24 to 6 seconds) and also for complex puzzles like
  Pelikan Burr time dropped to 66% (from 5.5 to 3.6 seconds)

- new editing possibilities: drag to fill rectangles and a button that
  makes your changes not just to the current layer but to all

- add possibility to load PuzzleSolver3D filed (this can be done
  with the "Import" entry in the main menu

- add function to make it possible to not completely disassemble
  the puzzles. This is done by putting pieces into groups. All
  pieces that are in the same group can stay together and the
  puzzle is still considered as disassembled.
    Group 0 is different. All pieces in group 0 need to be
  taken apart until single. You can set the group for each piece
  with the G+ and G- buttons in the problem tab

- when puzzles where saved before a result shape was defined the
  program refused to load the file. This works now. Old filed
  can be loaded as well

- small correction to the 3d view. Cubes besides variable cubes had
  missing faces

------------- Version 0.1.6 Jul 10 2005

- add button to change color

- documentation update

- add a lot of comments

- make "just count" work

- enable time display and estimation

- thread fix for win 9x

- load of bad files no longer abborts program but show message

------------- Version 0.1.5 Jul 10 2005

- no editing of problem while solving

- assembler status in file contains version

- error message, when failed to load

- remove solutions when editing

- variable cubes are not allowed in piece shapes

- memory leaks, uninitialized variables, other misc. valgrind messages

- update interface when solution has anded and reenable everything


------------- Version 0.1.4 Jul 6 2005

- more agressive reduce, may take a bit longer but still faster than
the original one that took ages for some puzzles

- valgrind fixes for memory frees and uninitialized memory

- the assembly state can now be saved and resumed so you can top the
calculation save and resume where you left off the next day

- new disassembly engine that is much faster for complex puzzles but a
bit slower for simple to disassemble puzzles

- faster disassembler preparation making the disassembling for simple
problems much faster

- better voxel space drawing, including all edges

- voxel space can now also draw the constraint colors besides the shape
color

- add toggle button on a status bar to toggle between piece and
constraint color

- separator text size was sometimes calculates wrong

- add web adress to about dialog

- populate the status line with some information


------------- Version 0.1.3 Jun 26 2005

- buttons use up frame now

- doc update

- make it possible to stop while preparing the assembler, you just have
to wait for it to finish. Bevore that the stop button was ignored while
in preparation

- piece fit test speedup. This should improve preparation speed

- when selecting a shape in the list that lists the piece and the piece
count for the current problem, the corresponding piece gets selected

- about box

- problem renaming

- when something is not right with the puzzle a message box appears now
instad of a hang in the GUI

- set the z-layer of the shape editor to 0 on new shape

- bugfixes


------------- Version 0.1.2 Jun 21 2005

old versions


