mnoGoSearch 3.3.8 reference manual: Full-featured search engine software
Prev |  | Next

# Appendix A. mnoGoSearch change history

# Changes in 3.3

## Changes in 3.3.8 (13 February 2009)

- The UserOrder command was added to `indexer.conf` to create helper data for fast ordering by a user defined section.

- New implementation of search results cache was added. Use the `QCache=yes` parameter to DBAddr to activate the new search result cache. Along with fast retrival of the results for the cached queries, the new search result cache also supports the search in found feature. Also, the new search result cache does not need manual cleaning after recreating of the search index.

- A new "`-D number`" command line option is now understood by indexer. This options makes indexer connect only to the given database (when running a multi-database environment). For example, when started with `-D2`, indexer will crawl only those targets stored in the database corresponding to the second DBAddr command of `indexer.conf`.

- URLSelectSkipLock - a new `indexer.conf` command was added. By default, indexer sends a `LOCK TABLE url` SQL query when fetching a set of new crawler targets from a MySQL database to avoid multiple indexer instances crawling into the same URLs. As fetching targets can take up to a few seconds in a huge database, it can make simultaneous search queries stall and wait for indexer to finish fetching targets. URLSelectSkipLock helps to avoid this kind of delays in search queries when you're running only a single instance of indexer at the same time.

- Prepared statements support for MySQL and PostgreSQL client-server protocols was added, which slightly improves crawling and indexing performance. Use the `ps=yes` parameter to DBAddr to activate using of prepared statements.

- `indexer -Eblob` now doesn't put information about the URLs not matching the command line filters (e.g. on status or URL), for performance purposes.

- A new command CrawlerThreads is now understood in `indexer.conf` to specify the number of crawler threads to start by default when `-N` command line option is not given to indexer.

- Fixed that search.cgi and indexer crashed in some cases when using UserScore on a 64-bit platform.

- Fixed that "`indexer -a -f urllist.txt`" incorrectly used "prefix match" instead of "exact match" when marking documents with the URLs listed in the given file as expired.

- A new AddEncoding command is now understood in `indexer.conf`. AddEncoding associates file names and extensions with Mime content encoding types. For example:

      AddEncoding gzip *.html.gz

- A new CrawlDelay `indexer.conf` command was added. CrawlDelay sets the number of seconds to wait between subsequent requests to the same server.

- search.cgi now understands `-d` command line argument to pass a template file name to load.

- `$base64(varname)` template format was added to print content of a variable using base64 encoding.

- Better score results for documents containing full long search phrases.

- A new command UseLocalCachedCopy was added into `search.htm`. Use this command to generate excerpts and "Cached Copy" documents from the original copy of a document when indexing local file system. This command helps to avoid storing of cached copies in the database and thus makes the database smaller.

- A new command LoadURLBasicInfo was added into `search.htm`. Use this command to improve performance in case when you only need to output document IDs and score values in search results and don't need the other basic information about the documents such as URL, last modification date, document size (and other columns from the table "`URL`").

- A new command UserSiteScore is now understood in `search.htm`. It works similarly to UserScore, but sets the desired score factor for the entire host name instead of a single document.

- New phrase segmenter types `cjk` and `cjk-phrase` were added to make mnoGoSearch suit East-Asian languages better.

- search.cgi automatically switches to `chj-phrase` segmenter mode when `m=phrase` query string parameter is given and segmenter mode is `cjk`.

- A new template variable `$(SEGMENTER.QUERY_STRING)` was added. This variable contains the query string after being processed by segmenter and can be used for testing and debugging the search template.

- Fixed that mnoGoSearch PHP extension module could crash when using Ispell files for stemming.

- It's now possible to use Spell and Affix commands in PHP extension module's function `udm_set_agent_param_ex()`.

- A new DBAddr parameter `step=number` was added. It makes indexer load not more than "`number`" documents at the same time when creating fast search index. Use this command if you have a huge database which doesn't fit into RAM, or you want to limit memory consumed by `indexer -Eblob`. This parameter can also be useful when using mnoGoSearch with a MySQL server with a small `max_allowed_packet` value.

- Fixed that indexer and search.cgi crashed in some cases due to wrong use of `OCILobGetLength()` in the code.

- The DBAddr parameter `setnames=charsetname` is now understood when connecting to MySQL and PostgreSQL via ODBC.

- Bug#3773 "Phrase excerpts do not work in some cases" was fixed.

- Bug#3791 "indexer exits even though content encoding is known" was fixed.

- A new UserCacheQuery `indexer.conf` command was added to store search results in the database. This can help to use mnoGoSearch as an external full-text solution together with your database driven application.

- Improvements in ExcerptPadding were made to generate nicer excerpts from East-Asian texts.

- A new DBAddr parameter `Compress=yes` was added to activate compression in MySQL's client-server protocol by using `mysql_options(&mydb->mysql, MYSQL_OPT_COMPRESS, 0)` API's call. This option improves indexing and search performance when connecting to a MySQL server on a remote host.

- Fixed that search.cgi tried to load a sorting section even when "`su`" search parameter was empty, which caused performance problems.

- configure --with-docs now automatically searches for the DocBook's catalog in a number of common locations. Previously one had to fix the file `doc/catalog` manually to build the HTML manual.

- Log level for "Unsupported Content-Type" and "Unsupported Content-Encoding" messages was changed from `ERROR` to `WARNING` to avoid excessive flood of syslog logs when running indexer with `-l1` command line option.

- A description how to use rtfx (a nice RTF-to-XML converter) was added into the manual and `indexer.conf-dist`.

- The `HIGH_PRIORITY` keyword was added into more SQL `SELECT` queries sent to MySQL during search time to give a higher priority to search.cgi over the simultaneosly runnig indexer instances.

- indexer now adds the `FIRST N` clause into the SQL `SELECT` query when fetching crawler targets from a Firebird database. This slightly improves crawling performance, as well as offloads the Firebird server.

- The command PagesPerScreen was added into the manual.

## Changes in 3.3.7 (11 April 2008)

- New synonym file command "Mode: return" was added. The words written on the same line in a synonym file are expanded only to the leftmost words in this mode.

- Synonym file command "Mode: roundtrip" was added as a synonym to "Mode: reverse" to avoid ambiguity. The old version (e.g. reverse) will be removed eventually.

- search.cgi now can work as an inetd or xinetd service. See the Section called Running search.cgi from inetd / xinetd in Chapter 2 for details.

- -s flag now understands status range, e.g. "indexer -s200-299" will crawl documents having status in the range 200..299.

- C-API description was added into the manual. See Reference II, mnoGoSearch C API function reference for details.

- A possibility to debug score values was added. See the Section called Analyzing score values in Chapter 10 for details.

- ppthtml PPT-to-HTML parser configuration instructions were added into the manual.

- Performance improvement: when processing wild-card patterns like *.txt or *.htm (e.g. file extensions in the AddType, Allow, Disallow commands etc), comparison code now automatically switches from "wild-card comparison" to "string ending comparison" for this type of patterns.

- Performance improvements were made in creating search index ("indexer -Eblob"), which is now about 30% faster with Firebird, 80% faster with SQLite3, 60% faster with Mimer, 30% faster with Sybase ASE.

- Minor performance improvements were made in various pieces of the sources.

- Search now returns at most 1000 results by default, to avoid flood attacks.

- Fixed that user-defined sections didn't respect

      <META NAME="Robots" CONTENT="NOINDEX">

  tags.

## Changes in 3.3.6 (27 November 2007)

- The default word storage mode was changed to DBMode=blob.

- DBMode=blob now works with SQLite3.

- Fixed that the "flags" commands in Ispell affix files were expected to start immediately after the "new line" character. Some affix files available on the Internet have leading spaces and tabs before these commands. Previously mnoGoSearch didn't read these files correctly.

- Bug#2023 "--disable-mysql-fulltext-plugin doesn't work" was fixed.

- Fixed that "GroupBySite=yes" didn't work with DBMode=multi correctly.

- Search and indexing performance improvements were made.

- search.cgi now uses less memory in DBMode=blob, especially for huge results.

## Changes in 3.3.5 (17 October 2007)

- Fixed an XSS (cross-site scripting) security problem in the default template `search.htm-dist`. Passing special values of the `"t"` query string variable to search.cgi resulted in bad code injection near the `OPTION` tags of the `<SELECT NAME="t">` option list in extended search form.

  This problem happened only with `<SELECT NAME="t">` which is inside a HTML comment in the default template. Other `SELECT` lists were not affected, if you didn't put them into a HTML comment.

  To prevent this problem, search.cgi was modified to understand variable references with "HTML-encoded" output format:

      <OPTION VALUE="val" SELECTED="$&(var)">

  Previously only non-encoded variable references worked in `OPTION` tags:

      <OPTION VALUE="val" SELECTED="$(var)">

  The default template `search.htm-dist` was modified to use HTML-encoded output format in variable references in all `OPTION` tags.

  After upgrade to this release, modify the existing templates by replacing all `<OPTION VALUE="val" SELECTED="$(var)">` to `<OPTION VALUE="val" SELECTED="$&(var)">`.

- Thread concurrency for resolving host names and processing robot.txt files was significantly improved, which makes "indexer -Nnum" work much faster when indexing multiple sites.

- The SubstringMatchMinWordLength `search.htm` command was added. Thanks to Matthias Pigulla for contribution.

- The Skip `indexer.conf` command was added.

- The CaseFolding command was added to allow alternative lower case mapping for some languages (e.g. Turkish).

- In search queries with boolean operator ~ (NOT), e.g. "`usa & ~chicago`", boolean operator & (AND) is not required anymore. This syntax now works as well: "`usa ~chicago`". search.cgi automatically assumes & before ~.

- Udm_Set_Agent_Param_Ex() function in PHP extension module now understands `search.htm` compatible commands:

         Udm_Set_Agent_Param_Ex($udm_agent, "Section body  1 1");
         Udm_Set_Agent_Param_Ex($udm_agent, "Section title 2 1");

- The default value of the VaryLang was changed from "en" to empty.

- Cluster now honors the ReadTimeOut command in `search.htm` to skip the nodes which currently are not available, e.g. because of network problems. Previously, search waited 30 seconds before returning results if one of the nodes was unavailable.

- Performance improvements in phrase search were made.

- search.cgi now doesn't try to find clones for a document if value of its "url.crc32" is 0.

- Column type of "qcache.doclist" was changed from `BLOB` to `LONGBLOB` in MySQL structure, to allow storing of longer cached results.

- Fixed that indexer crashed in some cases when running with many threads.

- Fixed that <!INCLUDE> didn't work when the `CONTENT` parameter started with a variable reference, e.g.:

        <!SET NAME="x" CONTENT="http://hostname/">
        <!INCLUDE CONTENT="$(x)">

- Bug#1903 "$(tag) doesn't work in cluster" was fixed.

- Bug#1959 "Confusing message "Unable to find working zlib library" on missing libdmalloc" was fixed. Configure parameter "--enable-dmalloc" was changed to "--with-dmalloc", to be able to specify non-standard dmalloc location.

- Bug#2022 "search.cgi crashes when searching for a single word with 'Dehyphenate yes' and DBMode=blob" was fixed.

- Fixed a bug in HTTP content negotiation which made indexer after receiving a `"Vary: accept-language"` response header download the same URL several times again, even though `indexer.conf` didn't specify any languages to vary (i.e. when the VaryLang command was not set or was empty).

## Changes in 3.3.4 (27 July 2007)

- mnoGoSearch now works better for huge documents. Maximum number of words collected from each document was changed from "64K words per section" to "2048K words per section". Data format in DBMode=single was changed, users of DBMode=single have to reindex their documents from the beginning. Data format in DBMode=multi and DBMode=blob was not changed, reindexing in these modes is only necessary for huge documents (bigger than approximately 512K) - to make indexer collect more words from these documents. New limit allows to fully index documents with text size up to about 16Mb.

- The LoadTagInfo `search.htm` command was added, to make tag values available in search results using $(tag).

- The LoadURLInfo `search.htm` command was added, to switch off loading extra section values from the `urlinfo` table for performance purposes.

- The StripAccents yes/no command was added into `indexer.conf` and `search.htm` to make accent insensitive searches possible with the databases not supporting accent insensitive collations. When StripAccent is set to `yes`, all accented letters are converted to their non-accented counterparts when writing or looking up the word index.

- Content-Type "application/http" is now understood - a HTTP response with headers.

- Content-Type "application/http" now work external parsers: if result type of a parser is "application/http", then indexer consider it is a full HTTP response and parses both headers and content.

- PostgreSQL driver now understands the "setnames" DBAddr parameter to set client encoding. If a non-empty "setnames" parameter is given, PQsetClientEncoding() is executed immediately after establishing a connection to the server.

- Fixed that highlighting didn't work in some cases when a search query contained two or more phrases.

## Changes in 3.3.3 (8 May 2007)

- Performance improvement: the "sorting results by score" step is now much faster on big results (0.01 second vs 1.00 second on results returning one million documents).

- Performance improvement: searching for a single word is now about three times faster on big results.

- Some indexes were added into SQL schema to make searches with tag and category limit faster (Feature request #772).

- Feature request #1364 "highlight collation matches" was implemented. Now when using an accent insensitive collations (for example, `latin1_general_ci` with MySQL), search.cgi will take into account all word forms for excerpts and highlighting. For example, searches for French "cote" will also highlight "coté" and vice versa, if the non-exact word form generated hits.

- MySQL driver now understands `setnames` parameter in `DBAddr` (feature request #1326).

- MySQL driver now understands `sqllogbin` parameter in `DBAddr` (feature request #697).

- `DebugSQL` parameter to `DBAddr` is now understood. When `DebugSQL` is set to `yes`, indexer and search.cgi print all SQL queries sent to the database. mnoGoSearch must be compiled using `./configure --with-debug ...` to make this feature work.

- MinCoordFactor and MaxCoordFactor impact is now calculated separately for each section.

- "nwf" parameter is now understood in DBAddr string, to set its value per database.

- "HoldBadHrefs 0" now means never delete unavailable documents from the database automatically (e.g. when remote host is down), which improves indexing speed, and which is now default behavior. Only positive HoldBadHrefs values activate automatic deletion.

- Data type of urlinfo.sval was changed from TEXT to MEDIUMTEXT in MySQL table structure, to allow storing sections longer than 64K.

- Bug#1733 "'indexer -Ewordstat' problem with PostgreSQL" was fixed.

- Bug #1054 "indexer does not index html files without body tag" was fixed. A new special section with name "nobody" is now understood. If this section is configured, then indexer collects words outside the <body>...</body> tags. The default behavior is still not to index words outside these tags.

- Bug#768 "User defined section is too short (1Kb limit)" was fixed.

- Bug#1654 "SQLWordForms doesn't work with cluster" was fixed. Those using cluster should upgrade node.xml using the latest version of node.xml-dist.

- Bug#1713 "Square brackets in DOCTYPE makes XML parser fail" was fixed.

- Bug#1739 "indexer doesn't understand Content-Encoding for robots.txt" was fixed.

- Bug#1740 "'UseRemoteContentType yes' doesn't work." was fixed.

- Bug#1741 "'indexer.conf -Eblob -t tag' fails with 'Unknown table 's' in WHERE clause'" was fixed.

- Fixed that indexer ignored the LogLevel command.

- Fixed that popularity rank calculation didn't work with Interbase/Firebird. A missing column "url.shows" was added into SQL schema.

- Fixed that phrase search didn't work in some cases (a bug since 3.3.0).

## Changes in 3.3.2 (19 April 2007)

- "ResultContentType none" is now understood to suppress printing of the "Content-Type" HTTP header by search.cgi. This is useful if you execute search.cgi from another Web application which sends HTTP headers itself.

- ue search.cgi is now understood again to exclude documents with the given URL pattern from search results. This feature was broken in 3.2.x.

- indexer now uses `UDM_TMP_DIR` and `TMPDIR` environment variables when creating temporary files (e.g for external parsers) instead of the default /tmp.

- Fixed that standalone dash character was considered as a separate word with "Dehyphenate yes", so for the queries like "a - b", search.cgi incorrectly searched for three words: "a", "-", "b", which never returned results in "find all words" mode.

- Fixed that "UseCookie yes" made indexer crash when fetching data from HTDB sources.

- Fixed that excerpts generated from cached copy of TEXT files didn't work (bug since 3.3.0).

- Bug#746 "Stopwords in a long boolean query" was fixed.

- Bug#1016 "Indexer is selecting wrong Content-Type" was fixed.

- Bug#1024 "Clear database limitations do not work: error ORA-01795" was fixed.

- Bug#1044 "-Ewordstat: incorrect unicode sequence" was fixed.

- Bug#1110 "'invalid UTF-8 byte sequence detected' when INSERT INTO dictXX" was fixed. This error happened when indexing into PostgreSQL with DBMode=multi. The "intag" column type was changed from TEXT to BYTEA in the tables "dict00".."dictFF".

- Bug#1182 "Indexer crashes with -a -y 'content/type'" was fixed.

- Bug#1427 "ORA-01785: maximum number of expressions in a list is 1000" was fixed.

- Bug#1436 "Cannot run -Ewordstat, ORA-01400: cannot insert NULL" was fixed.

- Bug#1615 "The identifier "PATH_MAX" is undefined" wad fixed.

- Bug#1641 "Documentation problem" was fixed.

- Bug#1659 "GroupBySite doesn't work in cluster mode" was fixed.

- Bug#1679 "search.cgi dumps core on OpenBSD 4.0 when I search for non existing word" was fixed.

- Bug#1693 "User defined sections don't work for text/plain files" was fixed.

- Bug#1716 "Can't limit indexer to documents matching language" was fixed.

- Bug#1725 "Navigation doesn't work when using a single cluster node" was fixed.

- Bug#1726 "DateFormat doesn't work in cluster" was fixed.

## Changes in 3.3.1 (18 March 2007)

- Relevancy improvement: Fixed that average word distance was considered to be very big in the case when words were found in different sections (e.g. one word in "body" and one word in "title"). Word pairs from different sections are not taken into account anymore for distance calculation.

- Relevancy improvement: Average word distance is now calculated taking into account "wf" values for the sections - the final score is now more sensitive to word distances in the sections with higher "wf" values.

- DBMode=blob&LiveUpdates=yes is now understood in DBAddr parameter. If LiveUpdates=yes is specified, it's possible to crawl up to several thousand documents without full recreating of search index by running "indexer -Eblob". Thanks to Oz Basarir and Natural Capital Institute for sponsoring this feature.

- The "text" and "html" keywords were added into the "Section" command syntax, to apply either text or HTML parser for data returned from a "simple" HTDBDoc query. This option is useful if the source SQL table stores data in HTML format. The default value is "text". Thanks to Oz Basarir and Natural Capital Institute for sponsoring this feature.

- Column with name "last_mod_time" is now considered as modification time of the documents, returned from "simple" HTDBDoc queries.

- A new syntax to display N rightmost characters from a template variable was added. For example, $(URL:-10). Thanks to Eggert Ehmke for the idea and the original patch.

- Performance improvements in score calculation with non-empty "nwf" parameter were made.

- Fixed that "simple" HTDBDoc queries didn't work with Interbase/Firebird, because the driver returned empty column names.

- Fixed a bug which made search.cgi crash when generating a link to "cached copy" with a template having multiple DBAddr commands.

- Fixed a bug in character set conversion, which made indexer crash in rare cases.

- Fixed that "indexer -Cw" didn't empty the "bdict" table.

- Fixed a bug in cluster code which made search.cgi crash on processing of a front-end template with "Suggest yes" when search didn't return any results.

## Changes in 3.3.0 (06 March 2007)

- Cluster support was added. A typical cluster consists of several database machines and a single front-end machine. The front-end machine receives HTTP requests from a user's browser, forwards search queries to the database machines using HTTP protocol, receives back a limited number of top best search results (using a simple XML format, based on OpenSearch specifications) from every database machine, then parses and merges the results, and displays them according to score and applying HTML template. This approach distributes operations with high CPU and hard disk consumption between the database machines in parallel, leaving simple merge and HTML template processing functions to the the front-end machine. As of version 3.3.0, mnoGoSearch allows to join up to 256 database machines into a single cluster.

- node.xml-dist is now installed into /etc directory - an XML template for a cluster database machine.

- "DBAddr http://hostname/search.cgi/node.xml" `search.htm` command was added, to specify an URL of a cluster database machine interface with XML format.

- "DBAddr file:///path/to/node.xml" `search.htm` command was added, to specify a static XML search response. This is mostly for test purposes.

- Two cluster types were implemented - a merge cluster to join results from several independent databases, each created by its own `indexer.conf`, as well as a distributed cluster - created by a single `indexer.conf` when indexer automatically distributes search index between database machines.

- Changing default distribution type from "reminder" to "quotient". Thus, for `indexer.conf` having three DBAddr command, distribution is done as follows:

  - URLs with seed 0..85 go to the first DBAddr

  - URLs with seed 85..170 go to the second DBAddr

  - URLs with seed 171..255 go to the third DBAddr

  This distribution style simplifies manual redistribution of an existing clustered database when adding a new DBAddr (i.e. a new database machine). Future releases will provide an automatic tool for redistribution when adding and deleting machines in an existing cluster, as well as more configuration commands to control distribution.

- Maximum amount of words collected from a document was changed from 64K words per document to 64K words per section - positions are now enumerated per section, starting from the beginning of each section separately.

- "SaveSectionSize yes/no" `indexer.conf` and `search.htm` command was added. When SaveSectionSize is set to yes, indexer stores additional information about section sizes, making it possible to generate better score values, as well as to do "exact section match" searches. Default value is "yes".

- Relevancy improvement: "WordDensityFactor num" `search.htm` command was added. Num is a number in the range 0..255 to specify impact of word frequency on the result score. This feature works with "SaveSectionSize yes". The default value is 25.

- Exact section match syntax was added:

      title="Apache web server"

  This feature works with "SaveSectionSize yes".

- "WordFormFactor num" `search.htm` command was added to give more weight to the word forms originally written in the search query and less weight to generated word forms using ispell dictionaries and synonyms. Use with a number 0..255. Default value is 255. 255 means to give the same weight to the original and generated forms. 0 means maximum effect, i.e. weight for a generated word form is much smaller than weight for the original word form.

- Excerpt generating code performance improvements were done. Excerpt generation from CachedCopy is now about 6-12% faster.

- Using URL and Tag limits is now possible with "indexer -Eblob", e.g.:

      ./indexer -Eblob -u "%subdir%"
      ./indexer -Eblob -t tag

  This is to generate a search index over a subset of all documents collected during crawling.

- Using "Limit" command is also possible with "indexer -Eblob", e.g.:

  indexer.conf command:

      Limit subdir "SELECT rec_id FROM url WHERE url LIKE '%/subdir/%'"

  command line:

      ./indexer -Eblob --fl=subdir

- "ResultContentType type" `search.htm` command was added to specify Content-Type header generated by search.cgi. The default value is "text/html".

- "Dehyphenate yes/no" `search.htm` command was added. When "Dehyphenate yes" is specified, searching for "peace-making" also will return documents having "peacemaking". Thanks to Oz Basarir and Natural Capital Institute for sponsoring this feature.

- Clone template variables were changed: clones are now returned in the same row with the document itself, using CloneN prefix, e.g.: $(Clone0.URL). The "<!--clone-->" `search.htm` section and the $(CL) variable are not supported anymore.

- DetectClones is now "no" by default, for performance purposes.

- "CollectLinks yes/no" `indexer.conf` command was added. The default value is "no" which improves indexing performance by not pupulating the "links" table. As a side effect PopRank calculation is not possible in the default configuration. If PopRank is important for your installation, specify "CollectLinks yes" in `indexer.conf`.

- Default sort order was changed from "RP" (score, then popularity) to "R" (score). This change improves search performance for the installations where PopRank is not important.

- Indexer now honors <a rel="nofollow"> tags. Thanks to Jeff Veit for contribution.

- A simplified format of HTDBDoc command was added:

      HTDBDoc "SELECT title, body FROM docs WHERE id=$2"

  SQL column names are associated with "Section" names. Thanks to Oz Basarir and Natural Capital Institute for sponsoring this feature.

- It's now possible to specify wf as a parameter for DBAddr `search.htm` command, which is useful when merging two or more databases - to give more score to results coming from a desired database.

      DBAddr mysql://root@localhost/db1/?wf=FFFF
      DBAddr mysql://root@localhost/db2/?wf=1111
      DBAddr mysql://root@localhost/db3/?wf=1111

- MaxResults parameter was added for DBAddr, which is useful to add a limited number of sponsored links in the top of search results:

      DBAddr mysql://root@localhost/avd/?wf=FFFF&MaxResults=1
      DBAddr mysql://root@localhost/db1/?wf=1111
      DBAddr mysql://root@localhost/db2/?wf=1111

- $(DBOrder) template variable was added to display the original order of a document in its database result, before multiple DBAddr search results were merged into the final result. It is equal to $(Order) when using only a single DBAddr command in `search.htm`.

- FOR template operator was added. Loop limits can be both constants:

        <!FOR NAME="a" FROM="10" TO="20">a=$(a)<!ENDFOR>

  and variables that were previously set, for example by the SET operator:

        <!SET NAME="from" CONTENT="80">
        <!SET NAME="to" CONTENT="90">
        <!FOR NAME="a" FROM="$(from)" TO="$(to)">a=$(a)<!ENDFOR>

- "[no title]" is not added automatically anymore: an empty string is printed instead. One can use IF template operator to reproduce 3.2.x behaviour:

      <!IF NAME="title" CONTENT="">[no title]<!ELSE>$&(title)<!ENDIF>

- Various indexing and search performance improvements were made.

- Fixed that indexer didn't work with MySQL-5.1.15-GPL.

- "indexer -?" now prints its help page to `STDOUT` instead of `STDERR`.

- A "#version" record is now put into the table "bdict" when running "indexer -Eblob". mnoGoSearch version ID is put as its value. For example, mnoGoSearch 3.3.0 will put "30300" string.

- Preliminary implementation for DBMode=rawblob in `search.htm` was added. This mode is designed for direct search from the table "bdicti" without having to run "indexer -Eblob" and is intended for use with small search databases as a replacement for DBMode=single. In the future releases it will also be reused for real-time index updates - to avoid running "indexer -Eblob" when only a small number of documents were changed.

Prev | Home | Next
UdmResultFree |  | Index