# SANE: Supported Devices

The following table summarizes the devices supported by sane-backends-1.0.12.

This is only a summary! Please consult the manpages and the author-supplied webpages for more detailed (and usually important) information concerning each backend.

There are special tables for parallel port and USB scanners from Jonathan Buzzard.

If you have new information or corrections, please send e-mail to sane-devel, the SANE mailing list.

For an explanation of the tables, see the legend.

There are tables for scanners, still cameras, video cameras, APIs, and meta backends.

## Scanners

Manufacturers: Abaton, Acer Peripherals, Across Technologies, Actown, Adlib, AGFA, Apple, Aries, Artec/Ultima, Avision, Bell and Howell, Benq, BlackWidow, Boeder, BrightScan, Brother, Canon, Compaq, Cybercom, Devcom, Dextra, E-Lux, EDGE, Enhans, Epson, Escom, Escort, Fujitsu, Gallery, Genius, Guillemot / Hercules, Hewlett-Packard, IBM, Komodo, LEO, Lexmark, Linotype Hell, Medion/Lifetec/Tevion/Cytron, Memorex, Microtek, Minolta, Mitsubishi, Mustek, NEC, Nikon, Packard Bell, Panasonic, PIE, PIOTECH, Plustek, Primax, Prolink, Reflecta, Relisys, Ricoh, Scanport, Sceptre, Sharp, Siemens, Spot Technology, Syscan, Tamarack, Targa, Trust, UMAX, Visioneer, Viviscan, Vobis, Vuego

### Manufacturer: Abaton

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
Scan 300/GS | SCSI | alpha | All known modes and functions supported | abaton (v0.1) | sane-abaton
Scan 300/S | SCSI | untested | Untested, use with caution | abaton (v0.1) | sane-abaton

### Manufacturer: Acer Peripherals

Comment: Company was renamed to Benq.

### Manufacturer: Across Technologies

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
FS-1130 | SCSI | beta | FCC ID LUZFS1130 | leo (v1.0-10) | sane-leo

### Manufacturer: Actown

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
ACT Scan I 30 | SCSI | untested | sub model VM3520A | teco1 (v1.0-9) | sane-teco1

### Manufacturer: Adlib

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
JetScan630 | SCSI | stable |  | pie (v1.0) | sane-pie
JetScan636PRO | SCSI | untested |  | pie (v1.0) | sane-pie

### Manufacturer: AGFA

Link(s): http://www.agfa.com/

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
Arcus 1200 | SCSI | stable | Optional transparency unit supported. | SnapScan (v1.4) | sane-snapscan
Arcus II | SCSI | beta | Arcus *II*, not Arcus! | microtek (v0.13.1) | sane-microtek
DuoScan | SCSI | alpha |  | microtek (v0.13.1) | sane-microtek
Focus Color | SCSI | alpha | 3-pass | agfafocus (v0.2) | sane-agfafocus
Focus Color Plus | SCSI | alpha | 3-pass | agfafocus (v0.2) | sane-agfafocus
Focus GS Scanner | SCSI | untested | 6 bit gray | agfafocus (v0.2) | sane-agfafocus
Focus II | SCSI | untested | gray only | agfafocus (v0.2) | sane-agfafocus
Focus Lineart Scanner | SCSI | untested | Lineart only? Untested. | agfafocus (v0.2) | sane-agfafocus
SnapScan 300 | SCSI | beta |  | SnapScan (v1.4) | sane-snapscan
SnapScan 310 | SCSI | beta |  | SnapScan (v1.4) | sane-snapscan
SnapScan 600 | SCSI | stable | Optional ADF supported. | SnapScan (v1.4) | sane-snapscan
SnapScan 1212u | USB | stable |  | SnapScan (v1.4) | sane-snapscan
SnapScan 1236s | SCSI | stable | Optional ADF and transparency unit supported. | SnapScan (v1.4) | sane-snapscan
SnapScan 1236u | USB | stable | Optional ADF and transparency unit supported. | SnapScan (v1.4) | sane-snapscan
SnapScan e10 | USB | stable |  | SnapScan (v1.4) | sane-snapscan
SnapScan e20 | USB | stable |  | SnapScan (v1.4) | sane-snapscan
SnapScan e25 | USB | stable |  | SnapScan (v1.4) | sane-snapscan
SnapScan e26 | USB | stable |  | SnapScan (v1.4) | sane-snapscan
SnapScan e40 | USB | stable |  | SnapScan (v1.4) | sane-snapscan
SnapScan e42 | USB | stable |  | SnapScan (v1.4) | sane-snapscan
SnapScan e50 | USB | stable | Optional tranparency unit supported | SnapScan (v1.4) | sane-snapscan
SnapScan e52 | USB | stable | Optional tranparency unit supported | SnapScan (v1.4) | sane-snapscan
SnapScan e60 | USB | untested |  | SnapScan (v1.4) | sane-snapscan
StudioScan | SCSI | beta |  | microtek (v0.13.1) | sane-microtek
StudioScan II | SCSI | beta |  | microtek (v0.13.1) | sane-microtek
StudioScan IIsi | SCSI | beta |  | microtek (v0.13.1) | sane-microtek

### Manufacturer: Apple

Link(s): http://developer.apple.com/

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
Apple Scanner | SCSI | alpha | 4bit, 16 shades of gray | apple (v0.31) | sane-apple
ColorOneScanner | SCSI | alpha | truecolor (needs much work) but it scans in non color modes. | apple (v0.31) | sane-apple
OneScanner | SCSI | alpha | 8bit, 256 shades of gray. The backend needs work especially in the quantization code but it may work. | apple (v0.31) | sane-apple

### Manufacturer: Aries

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
Scan-It Pro 4800 | Parport (SPP, EPP) | stable | use driver-switch mov=2 | plustek (v0.45) | sane-plustek

### Manufacturer: Artec/Ultima

Link(s): http://www.artecusa.com/

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
1236 USB | USB | unsupported | Unsupported. Vendor/product 0x05d8/0x4001. Same id as one of the Artec Ultima 2000 scanners. More information (e.g. /proc/bus/usb/devices output) would be appreciated. | unsupported (v2003-05-25) | ?
A6000C | SCSI | stable | all modes working | artec (v0.5.16) | sane-artec
A6000C PLUS | SCSI | stable | f/w <= v1.92 alpha, f/w >= v1.93 OK | artec (v0.5.16) | sane-artec
AM12e+ | Parport | unsupported | Unsupported. Chipset unknown. Maybe similar to SCSI version or as6e? | unsupported (v2003-05-25) | ?
AM12S | SCSI | stable | all modes working | artec (v0.5.16) | sane-artec
AS6E | Parport | alpha | Requires the program 'as6edriver' to run. | as6e (v0.4.2) | sane-as6e
AT3 | SCSI | stable | all modes working | artec (v0.5.16) | sane-artec
AT6 | SCSI | alpha | First scan works, subsequent fail until scanner power cycle. | artec (v0.5.16) | sane-artec
AT12 | SCSI | stable | all modes working | artec (v0.5.16) | sane-artec
E+ 48U | USB | beta | CIS scanner based on the GT6816 chip. Apparently all other devices are re-badged Artec scanners. | artec_eplus48u (v0.0.10) | sane-artec_eplus48u
E+ Pro | USB | unsupported | Not supported. Vendor/product 0x05d8/0x4004. /proc/bus/usb/devices output is available. Chipset is GT6816. May work with the gt68xx backend after some work in the source code. | unsupported (v2003-05-25) | ?
Ultima 2000 | USB | beta | works, only product id 0x4002 is supported | gt68xx (v1.0-46) | sane-gt68xx
Ultima 2000 (0x4001) | USB | unsupported | Same name, but different ids: vendor/product 0x05d8/0x4001 is not supported. Chips: WINBOND W6662CF, POWERVISION PV108630-C2L, ATC 93LC46 (EEPROM?). The chips look similar to that reported on the umax1220u page. The scanner with product id 0x4002 is supported by the gt68xx backend. | unsupported (v2003-05-25) | ?
Ultima 2000 e+ | USB | alpha | works, only limited testing until now | gt68xx (v1.0-46) | sane-gt68xx

### Manufacturer: Avision

Link(s): http://www.avision.com, http://www.avision.com/

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
AV100CS | SCSI | untested |  | avision (vBuild: 70) | sane-avision
AV100IIICS | SCSI | untested |  | avision (vBuild: 70) | sane-avision
AV100S | SCSI | untested |  | avision (vBuild: 70) | sane-avision
AV210 | USB | untested |  | avision (vBuild: 70) | sane-avision
AV220 | USB | untested |  | avision (vBuild: 70) | sane-avision
AV240SC | SCSI | untested |  | avision (vBuild: 70) | sane-avision
AV260CS | SCSI | untested |  | avision (vBuild: 70) | sane-avision
AV360CS | SCSI | untested |  | avision (vBuild: 70) | sane-avision
AV363CS | SCSI | untested |  | avision (vBuild: 70) | sane-avision
AV420CS | SCSI | untested |  | avision (vBuild: 70) | sane-avision
AV600U | USB | untested | 1 pass, 1200 dpi | avision (vBuild: 70) | sane-avision
AV600U Plus | USB | untested | 1 pass, 1200 dpi | avision (vBuild: 70) | sane-avision
AV610CU Scancopier | USB | untested | 1 pass, 600 dpi | avision (vBuild: 70) | sane-avision
AV620CS | SCSI | stable | 1 pass, 600 dpi | avision (vBuild: 70) | sane-avision
AV620CS Plus | SCSI | stable | 1 pass, 1200 dpi | avision (vBuild: 70) | sane-avision
AV630CS | SCSI | stable | 1 pass, 1200 dpi - regularly tested | avision (vBuild: 70) | sane-avision
AV630CSL | SCSI | untested | 1 pass, 1200 dpi | avision (vBuild: 70) | sane-avision
AV660S | USB | untested | 1 pass, 1200 dpi | avision (vBuild: 70) | sane-avision
AV680S | USB | untested | 1 pass, 1200 dpi | avision (vBuild: 70) | sane-avision
AV690U | USB | untested | 1 pass, 2400 dpi | avision (vBuild: 70) | sane-avision
AV800S | SCSI | untested | 1 pass, 1200 dpi | avision (vBuild: 70) | sane-avision
AV810C | SCSI | untested | 1 pass, 1200 dpi | avision (vBuild: 70) | sane-avision
AV820 | SCSI | untested | 1 pass, 1200 dpi | avision (vBuild: 70) | sane-avision
AV820C | SCSI | untested | 1 pass, 1200 dpi | avision (vBuild: 70) | sane-avision
AV820C Plus | SCSI | untested | 1 pass, 1200 dpi | avision (vBuild: 70) | sane-avision
AV830C | SCSI | untested | 1 pass, 1200 dpi | avision (vBuild: 70) | sane-avision
AV830C Plus | SCSI | untested | 1 pass, 1200 dpi | avision (vBuild: 70) | sane-avision
AV880 | SCSI | untested | 1 pass, 1200 dpi | avision (vBuild: 70) | sane-avision
AV880C | SCSI | untested | 1 pass, 1200 dpi | avision (vBuild: 70) | sane-avision
AV6120 | SCSI | untested |  | avision (vBuild: 70) | sane-avision
AV6240 | SCSI | stable | 1 pass, ??? dpi | avision (vBuild: 70) | sane-avision
AV8000S | SCSI | stable | 1 pass, 1200 dpi, A3 - regularly tested | avision (vBuild: 70) | sane-avision
AVA3 | SCSI | untested | 1 pass, 600 dpi, A3 | avision (vBuild: 70) | sane-avision
iVina FB1600 | USB | unsupported | Not supported. Is reported to use GeneScan II GL646 chipset. Same as UMAX Astra 4500. | unsupported (v2003-05-25) | ?
iVina FB1800 | USB | unsupported | Not supported. No chipset information available. Same as UMAX Astra 4700. | unsupported (v2003-05-25) | ?
iVina FB2400 | USB | unsupported | Not supported. No chipset information available. Same as UMAX Astra 6700. | unsupported (v2003-05-25) | ?

### Manufacturer: Bell and Howell

Link(s): http://www.bhscanners.com/

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
COPISCAN II 2135 | SCSI | untested | Simplex Scanner | bh (v1.0-4) | sane-bh
COPISCAN II 2137(A) | SCSI | beta | Simplex Scanner (with ACE) - limited testing | bh (v1.0-4) | sane-bh
COPISCAN II 2138A | SCSI | untested | Simplex Scanner with ACE | bh (v1.0-4) | sane-bh
COPISCAN II 3238 | SCSI | untested | Simplex Scanner | bh (v1.0-4) | sane-bh
COPISCAN II 3338(A) | SCSI | untested | Simplex Scanner (with ACE) | bh (v1.0-4) | sane-bh
COPISCAN II 6338 | SCSI | beta | Duplex Scanner with ACE - development model | bh (v1.0-4) | sane-bh

### Manufacturer: Benq

Link(s): http://www.benq.com
Comment: Formerly Acer Peripherals

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
300f | SCSI | stable |  | SnapScan (v1.4) | sane-snapscan
310s | SCSI | stable |  | SnapScan (v1.4) | sane-snapscan
310u | USB | stable |  | SnapScan (v1.4) | sane-snapscan
320u | USB | stable |  | SnapScan (v1.4) | sane-snapscan
340u | USB | stable |  | SnapScan (v1.4) | sane-snapscan
610plus | SCSI | stable |  | SnapScan (v1.4) | sane-snapscan
610s | SCSI | stable |  | SnapScan (v1.4) | sane-snapscan
620s | SCSI | stable |  | SnapScan (v1.4) | sane-snapscan
620u | USB | stable | Optional tranparency unit supported | SnapScan (v1.4) | sane-snapscan
640bu | USB | stable |  | SnapScan (v1.4) | sane-snapscan
640u | USB | stable | Optional tranparency unit supported | SnapScan (v1.4) | sane-snapscan
1240 | USB | stable | Optional tranparency unit supported | SnapScan (v1.4) | sane-snapscan
3300 | USB | stable |  | SnapScan (v1.4) | sane-snapscan
4300 | USB | stable |  | SnapScan (v1.4) | sane-snapscan
5000 | USB | beta |  | SnapScan (v1.4) | sane-snapscan
5300 | USB | alpha | Problems with firmware upload reported | SnapScan (v1.4) | sane-snapscan

### Manufacturer: BlackWidow

Link(s): http://www.blackwidow.co.uk/

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
BW4800SP | SCSI | stable | rebadged Artec AT3 | artec (v0.5.16) | sane-artec

### Manufacturer: Boeder

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
Sm@rtScan Office | Parport USB | unsupported | Unsupported. Vendor/product 0x5cb, 0x1483. According to linux-usb.org that's the same ids as Trust Trust CombiScan 19200. The vendor is PowerVision Technologies, Inc. Maybe also a PV8630 as in the UMAX 1200U? | unsupported (v2003-05-25) | ?
Sm@rtScan Slim Edition | USB | beta | similar to Artec Ultima 2000 | gt68xx (v1.0-46) | sane-gt68xx

### Manufacturer: BrightScan

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
BrighScan OpticPro | Parport (SPP, EPP) | stable | Reported as P12 | plustek (v0.45) | sane-plustek

### Manufacturer: Brother

Link(s): http://www.brother.com/

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
MFC 4600 | Parport USB | unsupported | Unsupported. However there is a project to support this scanner/printer/fax combination. See link. | unsupported (v2003-05-25) | ?
MFC 5100c | Parport USB | unsupported | Unsupported. Some information is available (see link). See also MFC 4600. | unsupported (v2003-05-25) | ?
MFC 6800 | USB | unsupported | Unsupported. A backend is under development (see link). Vendor/product 0x04f9/0x0111. See also MFC 4600. | unsupported (v2003-05-25) | ?

### Manufacturer: Canon

Link(s): http://www.canon.com/

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
CanoScan 300 | SCSI | beta | 1 pass; flatbed scanner | canon (v1.12) | sane-canon
CanoScan 600 | SCSI | beta |  | canon (v1.12) | sane-canon
CanoScan 620S | SCSI | beta | 1 pass; flatbed scanner | canon (v1.12) | sane-canon
CanoScan 1200S | SCSI | beta | 1 pass; flatbed scanner | canon (v1.12) | sane-canon
CanoScan 2700F | SCSI | beta | 1 pass; film scanner | canon (v1.12) | sane-canon
CanoScan 2710S | SCSI | beta | 1 pass; 36bit film scanner | canon (v1.12) | sane-canon
CanoScan D646U | USB | unsupported | Probably not supported. USB Vendor/product 0x04a9/0x220b. /proc/bus/usb/devices output available. Maybe Genesys USB bridge + LM9830? Maybe could be supported by canon630u backend? See link for more information. | unsupported (v2003-05-25) | ?
CanoScan D660U | USB | unsupported | Unsupported. Vendor/product 0x04a9/0x2208. See link for more information. | unsupported (v2003-05-25) | ?
CanoScan D1250U2 | USB | unsupported | Not supported. However, someone started working on this scanner and some information is available (see link). | unsupported (v2003-05-25) | ?
CanoScan FB310P | Parport (ECP) | unsupported | Rebadged Avision, different command set | canon_pp (v0.32) | sane-canon_pp
CanoScan FB320P | Parport (ECP) | alpha | Newly added support | canon_pp (v0.32) | sane-canon_pp
CanoScan FB330P | Parport (ECP) | beta |  | canon_pp (v0.32) | sane-canon_pp
CanoScan FB610P | Parport (ECP) | unsupported | Rebadged Avision, different command set | canon_pp (v0.32) | sane-canon_pp
CanoScan FB620P | Parport (ECP) | alpha | Newly added support | canon_pp (v0.32) | sane-canon_pp
CanoScan FB620U | USB | unsupported | Probably not supported. Vendor/product 0x4a9/0x2202. Some information is available. | unsupported (v2003-05-25) | ?
CanoScan FB630P | Parport (ECP) | beta |  | canon_pp (v0.32) | sane-canon_pp
CanoScan fb630u | USB | beta | OK | canon630u (v0.1) | sane-canon630u
CanoScan fb636u | USB | untested | hopefully works | canon630u (v0.1) | sane-canon630u
CanoScan FB1210U | USB | unsupported | Not supported. Vendor/product 0x4a9/0x2205. However, a stand-alone program for FreeBSD is available. | unsupported (v2003-05-25) | ?
CanoScan LiDE20 | USB | beta | Poor color picture quality | plustek (v0.45) | sane-plustek
CanoScan LiDE30 | USB | beta | Poor color picture quality | plustek (v0.45) | sane-plustek
CanoScan N340P | Parport (ECP) | beta |  | canon_pp (v0.32) | sane-canon_pp
CanoScan N640P | Parport (ECP) | beta |  | canon_pp (v0.32) | sane-canon_pp
CanoScan N640P ex | Parport (ECP) | beta | Just an N640P in a different box? | canon_pp (v0.32) | sane-canon_pp
CanoScan N650U/N656U | USB | stable |  | plustek (v0.45) | sane-plustek
CanoScan N670U/N676U | USB | beta | Poor color picture quality | plustek (v0.45) | sane-plustek
CanoScan N1220U | USB | beta | Poor color picture quality | plustek (v0.45) | sane-plustek
CanoScan N1240U | USB | beta | Poor color picture quality | plustek (v0.45) | sane-plustek
FS4000 | USB SCSI | unsupported | Not supported. USB Vendor/product 0x04a9/0x3042. May work with Vuescan. Maybe SCSI over USB. | unsupported (v2003-05-25) | ?
LiDE 50 | USB | unsupported | Probably not supported. Chipset probably Genesys. Some information is available. | unsupported (v2003-05-25) | ?

### Manufacturer: Compaq

Link(s): http://www.compaq.com/

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
S4 100 | USB | unsupported | Not supported. Vendor=0x049f, Product=0x001a. | unsupported (v2003-05-25) | ?
S4-100 | USB | stable | Identical to UMAX 3400 | plustek (v0.45) | sane-plustek
S200 | USB | unsupported | Not supported. 2400x1200 dpi. Vendor=0x049f, Product=0x0021. One bulk-in, one bulk-out and one interrupt endpoint. Type-number: U0001-HB21, another type nr on the inside: 75100512-00 | unsupported (v2003-05-25) | ?

### Manufacturer: Cybercom

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
9352 | Parport (EPP) | alpha | 300 dpi CCD scanner | mustek_pp (v12) | sane-mustek_pp

### Manufacturer: Devcom

Link(s): http://www.blackwidow.co.uk/

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
9630S | SCSI | untested |  | pie (v1.0) | sane-pie
9636PRO | SCSI | stable |  | pie (v1.0) | sane-pie
9636S | SCSI | untested |  | pie (v1.0) | sane-pie

### Manufacturer: Dextra

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
DF-600P | SCSI | beta | sub model VM3510 | teco1 (v1.0-9) | sane-teco1
DF-1200T+ | SCSI | untested | sub model VM3530+ | teco1 (v1.0-9) | sane-teco1
DF-4830T | SCSI | untested | sub model VM4542 | teco1 (v1.0-9) | sane-teco1
DF-9624 | SCSI | untested | sub model VM6530+ | teco1 (v1.0-9) | sane-teco1

### Manufacturer: E-Lux

Comment: E-Lux and Enhans seem to have been purchased by dysan, now known as MEMOREX

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
j-6121 | Parport | unsupported | Probably unsupported. Sold 1998. Same as E-Lux j-6121. | unsupported (v2003-05-25) | ?

### Manufacturer: EDGE

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
KTX-9600US | SCSI | untested | no feedback | umax (v1.0-37) | sane-umax

### Manufacturer: Enhans

Comment: E-Lux and Enhans seem to have been purchased by dysan, now known as MEMOREX

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
j-6121 | Parport | unsupported | Probably unsupported. Sold 1998. Same as E-Lux j-6121. | unsupported (v2003-05-25) | ?

### Manufacturer: Epson

Link(s): http://www.epson.com/, http://www.epson.com

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
Actionscanner II | Parport | beta | US version of GT-5000 | epson (v0.2.32) | sane-epson
CX-3200 | USB | alpha |  | epson (v0.2.32) | sane-epson
CX-5200 | USB | alpha |  | epson (v0.2.32) | sane-epson
ES-300C | SCSI Parport | beta | US version of GT-6000 | epson (v0.2.32) | sane-epson
ES-600C | Parport | beta | US version of GT-6500 | epson (v0.2.32) | sane-epson
ES-1200C | Parport | beta | US version of GT-9000 | epson (v0.2.32) | sane-epson
ES-8500 | SCSI | beta |  | epson (v0.2.32) | sane-epson
Expression 636 | SCSI | stable | US version of GT-9500 | epson (v0.2.32) | sane-epson
Expression 800 | SCSI | stable |  | epson (v0.2.32) | sane-epson
Expression 1600 | SCSI USB IEEE-1394 | stable |  | epson (v0.2.32) | sane-epson
Expression 1680 | SCSI USB IEEE-1394 | stable |  | epson (v0.2.32) | sane-epson
FilmScan 200 | SCSI | untested | A better backend for the FilmScan 200 can be found at http://www.vjet.demon.co.uk/scanner/ | epson (v0.2.32) | sane-epson
GT-5000 | Parport | beta |  | epson (v0.2.32) | sane-epson
GT-5500 | SCSI | beta |  | epson (v0.2.32) | sane-epson
GT-6000 | SCSI Parport | beta |  | epson (v0.2.32) | sane-epson
GT-6500 | Parport | beta |  | epson (v0.2.32) | sane-epson
GT-7000 | SCSI | beta |  | epson (v0.2.32) | sane-epson
GT-8000 | SCSI | beta |  | epson (v0.2.32) | sane-epson
Perfection 600 | SCSI | stable | OK, SCSI-ID=EPSON Perfection600 | umax (v1.0-37) | sane-umax
Perfection 610 | USB | stable |  | epson (v0.2.32) | sane-epson
Perfection 636S | SCSI | stable | US version of GT-7000 | epson (v0.2.32) | sane-epson
Perfection 636U | USB | stable |  | epson (v0.2.32) | sane-epson
Perfection 640 | USB | stable |  | epson (v0.2.32) | sane-epson
Perfection 660 | USB | beta |  | SnapScan (v1.4) | sane-snapscan
Perfection 1200Photo | USB | stable | with TPU | epson (v0.2.32) | sane-epson
Perfection 1200S | SCSI | stable |  | epson (v0.2.32) | sane-epson
Perfection 1200U | USB | stable |  | epson (v0.2.32) | sane-epson
Perfection 1240 | SCSI USB | stable |  | epson (v0.2.32) | sane-epson
Perfection 1250 | USB | stable |  | plustek (v0.45) | sane-plustek
Perfection 1250Photo | USB | stable |  | plustek (v0.45) | sane-plustek
Perfection 1260 | USB | stable |  | plustek (v0.45) | sane-plustek
Perfection 1260Photo | USB | stable |  | plustek (v0.45) | sane-plustek
Perfection 1640 | SCSI USB | stable |  | epson (v0.2.32) | sane-epson
Perfection 1650 | USB | stable |  | epson (v0.2.32) | sane-epson
Perfection 1660 | USB | stable |  | epson (v0.2.32) | sane-epson
Perfection 2400 | USB | stable |  | epson (v0.2.32) | sane-epson
Perfection 2450 | USB IEEE-1394 | stable |  | epson (v0.2.32) | sane-epson
Perfection 3200 | USB | stable | US version of the GT-9800 | epson (v0.2.32) | sane-epson

### Manufacturer: Escom

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
Image Scanner 256 | SCSI | stable | OK, SCSI-ID=UMAX UG 80 | umax (v1.0-37) | sane-umax

### Manufacturer: Escort

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
Galleria 600 | SCSI | untested | untested, SCSI-ID=ESCORT Galleria 600S | umax (v1.0-37) | sane-umax

### Manufacturer: Fujitsu

Link(s): http://www.fujitsu.com/, http://imagescanner.fujitsu.com/product/index.html, http://www.fcpa.fujitsu.com/products/scanners/, http://www.fujitsu.ca/

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
fi-4010C | USB | unsupported | Unsupported. Vendor/product: 0x04c5, 0x1029. Maybe similar to fi-4220C? | unsupported (v2003-05-25) | ?
fi-4110CU | USB | unsupported | Unsupported. Vendor/product unknown. Maybe similar to fi-4220C? | unsupported (v2003-05-25) | ?
fi-4120C | USB SCSI | untested | Probably similar to fi-4220C? | fujitsu (v1.0) | sane-fujitsu
fi-4220C | SCSI USB | beta |  | fujitsu (v1.0) | sane-fujitsu
fi-4340C | SCSI USB | beta |  | fujitsu (v1.0) | sane-fujitsu
M3091DCd | SCSI | beta |  | fujitsu (v1.0) | sane-fujitsu
M3092DCd | SCSI | beta |  | fujitsu (v1.0) | sane-fujitsu
M3093GDim | SCSI | beta |  | fujitsu (v1.0) | sane-fujitsu
M3093GXim | SCSI | beta |  | fujitsu (v1.0) | sane-fujitsu
M3096G | SCSI | beta |  | fujitsu (v1.0) | sane-fujitsu
M4097 | SCSI | beta |  | fujitsu (v1.0) | sane-fujitsu
ScanPartner | SCSI | untested |  | avision (vBuild: 70) | sane-avision
ScanPartner 10 | SCSI | untested |  | avision (vBuild: 70) | sane-avision
ScanPartner 10C | SCSI | untested |  | avision (vBuild: 70) | sane-avision
ScanPartner 15C | SCSI | untested |  | avision (vBuild: 70) | sane-avision
ScanPartner 93GX | SCSI | beta |  | fujitsu (v1.0) | sane-fujitsu
ScanPartner 300C | SCSI | untested |  | avision (vBuild: 70) | sane-avision
ScanPartner 600C | SCSI | untested |  | avision (vBuild: 70) | sane-avision
ScanPartner Jr | SCSI | untested |  | avision (vBuild: 70) | sane-avision
ScanStation | SCSI | untested |  | avision (vBuild: 70) | sane-avision
SP15C | SCSI | beta |  | sp15c (v1.12) | sane-sp15c

### Manufacturer: Gallery

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
4800 | Parport (EPP) | alpha | 300 dpi CCD scanner | mustek_pp (v12) | sane-mustek_pp

### Manufacturer: Genius

Link(s): http://www.genius-kye.com/, http://www.geniusnet.com.tw/, http://www.genius.kye.de/

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
Colorpage HR6 V2 | USB | stable |  | plustek (v0.45) | sane-plustek
Colorpage HR6A | USB | untested |  | plustek (v0.45) | sane-plustek
Colorpage HR6X | USB | untested |  | plustek (v0.45) | sane-plustek
Colorpage HR7 | USB | stable |  | plustek (v0.45) | sane-plustek
Colorpage HR7LE | USB | untested |  | plustek (v0.45) | sane-plustek
ColorPage HR7X Slim | USB | unsupported | Not supported. Vendor/product: 0x0458/0x2018. Is reported to use the GL646 chipset. See link for more details. | unsupported (v2003-05-25) | ?
Colorpage Vivid III | USB | unsupported | Not supported. Vendor/product: 0x07b3/0x0001. Same ids as the Plustek OpticPro 1212U and older U12/UT12. Maybe the same chips are used? | unsupported (v2003-05-25) | ?
Colorpage Vivid III V2 | Parport (SPP, EPP) | stable | Reported as PT12 | plustek (v0.45) | sane-plustek
Colorpage Vivid Pro II Film | Parport (SPP, EPP) | stable | Reported as OP9636T/12000T | plustek (v0.45) | sane-plustek
Colorpage Vivid3x | USB | alpha | Works but has limited testing | gt68xx (v1.0-46) | sane-gt68xx
Colorpage Vivid3xe | USB | alpha | Works but has limited testing. Color problems? Reports are welcome. | gt68xx (v1.0-46) | sane-gt68xx
ColorPage-HR5 (Pro) | SCSI | stable | OK, SCSI-ID=KYE ColorPage-HR5 | umax (v1.0-37) | sane-umax
FS-1130 Colorpage Scanner | SCSI | untested |  | leo (v1.0-10) | sane-leo

### Manufacturer: Guillemot / Hercules

Link(s): http://www.guillemot.com

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
Maxi Scan A4 Deluxe (SCSI) | SCSI | stable | Rebadged SnapScan 310s. | SnapScan (v1.4) | sane-snapscan
Maxi Scan A4 USB 640U | USB | stable | Rebadged Benq 640U. | SnapScan (v1.4) | sane-snapscan
Scan@home Touch 1248 (USB) | USB | stable | Rebadged Benq 3300. | SnapScan (v1.4) | sane-snapscan

### Manufacturer: Hewlett-Packard

Link(s): http://www.hp.com, http://www.hp.com/

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
Photo Scanner 1000 | USB | unsupported | Not supported by SANE. However, it's detected as mass storage device so just mounting it is reported to work. See link for devices data. | unsupported (v2003-05-25) | ?
PhotoSmart PhotoScanner | SCSI | stable |  | hp (v1.02) | sane-hp
ScanJet 3c | SCSI | stable |  | hp (v1.02) | sane-hp
ScanJet 3p | SCSI | stable |  | hp (v1.02) | sane-hp
ScanJet 4c | SCSI | stable |  | hp (v1.02) | sane-hp
ScanJet 4p | SCSI | stable |  | hp (v1.02) | sane-hp
ScanJet 5p | SCSI | stable |  | hp (v1.02) | sane-hp
ScanJet 5s | Parport (EPP) | alpha | Requires libieee1284 library | hpsj5s (v0.03) | sane-hpsj5s
ScanJet 2100C | USB | stable |  | plustek (v0.45) | sane-plustek
ScanJet 2200C | USB | stable |  | plustek (v0.45) | sane-plustek
ScanJet 2300C | USB | unsupported | Unsupported. Vendor/product 0x03f0/0x0901. See link for devices output. | unsupported (v2003-05-25) | ?
Scanjet 3200C | Parport (EPP) | beta | works (relabelled 1220P and 2000P) | umax_pp (v1) | sane-umax_pp
ScanJet 3500c | USB | unsupported | Unsupported. Seems to use RealTek RTS8801C2-6. Vendor/Product ID 0x03F0/0x2205. See link and other Scanjet 35x0c entries. | unsupported (v2003-05-25) | ?
ScanJet 3530c | USB | unsupported | Unsupported. Chipset is Realtek RTS8801C2-6. Vendor/Product ID 0x03F0/0x2005. See link and other Scanjet 35x0c entries. | unsupported (v2003-05-25) | ?
ScanJet 3570c | USB | unsupported | Unsupported. Probably Realtek RTS8801C2-6, same ids as Scanjet 3530c. Has a TA. Vendor/product id 0x03F0/0x2005. See link and other Scanjet 35x0c entries. | unsupported (v2003-05-25) | ?
ScanJet 3570cxi | USB | unsupported | Unsupported. See 3570c. | unsupported (v2003-05-25) | ?
ScanJet 4100C | USB | stable |  | hp (v1.02) | sane-hp
ScanJet 4400C | USB | unsupported | Not supported. Seems to use the same chip as the 4470C. A stand-alone program for that scanner is available. | unsupported (v2003-05-25) | ?
ScanJet 4470C | USB | unsupported | Not supported. However, a stand-alone program is available. | unsupported (v2003-05-25) | ?
ScanJet 4500C | USB | unsupported | Not supported. Landscape scanner. Same as 5500C, but without ADF. | unsupported (v2003-05-25) | ?
ScanJet 4570C | USB | unsupported | Not supported. Portrait scanner with TA, similar to 4500C. Same as 5550C, but without ADF. Vendor/product: 0x03f0/0x1305. Not much is known about this scanner. The manual says: 4500c and 5500c series. | unsupported (v2003-05-25) | ?
ScanJet 5100C | Parport | stable | Requires ppscsi driver and epst module | hp (v1.02) | sane-hp
ScanJet 5200C | Parport USB | stable | Parallel interface requires ppscsi driver and epst module | hp (v1.02) | sane-hp
ScanJet 5300C | USB | stable | 1 pass, 1200 dpi - regularly tested | avision (vBuild: 70) | sane-avision
ScanJet 5370C | USB | alpha | 1 pass, 2400 dpi | avision (vBuild: 70) | sane-avision
ScanJet 5400c | USB | alpha |  | hp5400 (v1.0-2, NEW!) | sane-hp5400
ScanJet 5470c | USB | alpha |  | hp5400 (v1.0-2, NEW!) | sane-hp5400
ScanJet 5490c | USB | untested |  | hp5400 (v1.0-2, NEW!) | sane-hp5400
ScanJet 5500C | USB | unsupported | Not supported. Same as 4500C, but with ADF. | unsupported (v2003-05-25) | ?
ScanJet 5550C | USB | unsupported | Not supported. Same as 4570C, but with ADF. | unsupported (v2003-05-25) | ?
ScanJet 6100C | SCSI | stable |  | hp (v1.02) | sane-hp
ScanJet 6200C | SCSI USB | stable |  | hp (v1.02) | sane-hp
ScanJet 6250C | SCSI USB | stable |  | hp (v1.02) | sane-hp
ScanJet 6300C | SCSI USB | stable |  | hp (v1.02) | sane-hp
ScanJet 6350C | SCSI USB | stable |  | hp (v1.02) | sane-hp
ScanJet 6390C | SCSI USB | stable |  | hp (v1.02) | sane-hp
ScanJet 7400c | USB | beta | 1 pass, 1200 dpi - dual USB/SCSI interface | avision (vBuild: 70) | sane-avision
ScanJet 7450c | USB | beta | 1 pass, 1200 dpi - dual USB/SCSI interface | avision (vBuild: 70) | sane-avision
ScanJet 7490c | USB | beta | 1 pass, 1200 dpi - dual USB/SCSI interface | avision (vBuild: 70) | sane-avision
ScanJet 8200C | USB | unsupported | Not supported. SCSI optional. Includes TA. No further information. | unsupported (v2003-05-25) | ?
ScanJet 8250C | USB | unsupported | Not supported. SCSI optional. Includes ADF and TA. Probably similar to 8200C. No further information. | unsupported (v2003-05-25) | ?
ScanJet 8290C | USB | unsupported | Not supported. SCSI optional. Includes ADF and TA. Similar to 8200C? No further information. | unsupported (v2003-05-25) | ?
ScanJet IIc | SCSI | stable |  | hp (v1.02) | sane-hp
ScanJet IIcx | SCSI | stable |  | hp (v1.02) | sane-hp
ScanJet IIp | SCSI | stable |  | hp (v1.02) | sane-hp
ScanJet Plus | Propietary | stable | Driver for HP parallel interface card required | hp (v1.02) | sane-hp

### Manufacturer: IBM

Link(s): http://www.ibm.com/, http://www.ibm.com

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
2456 | SCSI | alpha | Was reported to work long time ago. Reports are welcome. | ibm (v1.0-4, NEW!) | sane-ibm
ADF Color Scanner | Proprietary | unsupported | Unsupported. Uses proprietary ISA card. Maybe the same as the Plustek Spectra ADF? | unsupported (v2003-05-25) | ?

### Manufacturer: Komodo

Link(s): http://www.komodo.com/

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
S1200 | SCSI | untested | rebadged Sceptre S1200 | sceptre (v1.0-10) | sane-sceptre

### Manufacturer: LEO

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
LEOScan S3 | SCSI | beta | FCC ID LUZFS1130 | leo (v1.0-10) | sane-leo

### Manufacturer: Lexmark

Link(s): http://www.lexmark.com/

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
X70 | USB | beta | works, some resolutions fail at 16 bit | gt68xx (v1.0-46) | sane-gt68xx
X73 | USB | beta | works, some resolutions fail at 16 bit, same as X70 | gt68xx (v1.0-46) | sane-gt68xx
X83 | USB | unsupported | Unsupported. Vendor/product 0x043d/0x003d. It does use a firmware (in some sort of eeprom(?), at least it's not necesary tu upload it). Probably parport over USB. Seems to use PAL16R8 and GL640USB_40SOJ chips. | unsupported (v2003-05-25) | ?

### Manufacturer: Linotype Hell

Link(s): http://www.heidelberg.com/

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
Jade | SCSI | stable | OK, SCSI-ID=LinoHell JADE | umax (v1.0-37) | sane-umax
Jade | SCSI | stable | OK, SCSI-ID=LinoHell Office | umax (v1.0-37) | sane-umax
Jade2 | SCSI | stable | OK, SCSI-ID=LinoHell Office2 | umax (v1.0-37) | sane-umax
Linoscan 1400 | SCSI | stable | OK, SCSI-ID=HDM LS4H1S | umax (v1.0-37) | sane-umax
Opal | SCSI | untested | support disabled until tested - please contact author | umax (v1.0-37) | sane-umax
Opal Ultra | SCSI | untested | support disabled until tested - please contact author | umax (v1.0-37) | sane-umax
Saphir | SCSI | untested | support disabled until tested - please contact author | umax (v1.0-37) | sane-umax
Saphir HiRes | SCSI | untested | support disabled until tested - please contact author | umax (v1.0-37) | sane-umax
Saphir Ultra | SCSI | untested | support disabled until tested - please contact author | umax (v1.0-37) | sane-umax
Saphir Ultra II | SCSI | untested | support disabled until tested - please contact author | umax (v1.0-37) | sane-umax
Saphir2 | SCSI | stable | OK, SCSI-ID=LinoHell SAPHIR2 | umax (v1.0-37) | sane-umax
Saphir3 | SCSI | stable | OK, SCSI-ID=LinoHell SAPHIR3 | umax (v1.0-37) | sane-umax

### Manufacturer: Medion/Lifetec/Tevion/Cytron

Link(s): http://www.medion.com, http://www.medion.de/, http://www.medion.com/
Comment: Sold by Aldi and Tchibo.

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
LT 9452 | USB | beta | Similar to Mustek ScanExpress 1200 UB Plus | gt68xx (v1.0-46) | sane-gt68xx
MD 4394 | USB | beta | Product id 0x4002. If you have 0x4003, use artec_eplus48u backend. | gt68xx (v1.0-46) | sane-gt68xx
MD 5345 | USB | unsupported | Probably unsupported. Vendor/product 0x0461/0x0377. The vendor id is Primax. Same as MD 6228. Maybe the same as Primax Slim-Line 1200. | unsupported (v2003-05-25) | ?
MD 6228 | USB | unsupported | Probably unsupported. Vendor/product 0x0461/0x0377. The vendor id is Primax. Same as MD 5345. Maybe the same as Primax Slim-Line 1200. | unsupported (v2003-05-25) | ?
MD 9458 | USB | beta | Similar to Artec Ultima 2000 (e+?) | gt68xx (v1.0-46) | sane-gt68xx
MD 9848 | Parport (EPP) | alpha | 300 dpi CCD scanner | mustek_pp (v12) | sane-mustek_pp
MD/LT 935x | Parport (EPP) | beta | CIS scanner | mustek_pp (v12) | sane-mustek_pp
MD/LT 985x | Parport (EPP) | beta | CIS scanner | mustek_pp (v12) | sane-mustek_pp
MD/LT 9375 | USB | untested | Untested, but is reported to have the same ids as the Artec Ultima 2000. Please test. | gt68xx (v1.0-46) | sane-gt68xx
MD/LT 9385 | USB | beta | Similar to Artec Ultima 2000 | gt68xx (v1.0-46) | sane-gt68xx
MD/LT 9890 | Parport (EPP) | beta | CIS scanner | mustek_pp (v12) | sane-mustek_pp
MD4394 | USB | beta | Obviously two different scanners were sold under this name. Only scanners with product id 0x4003 will work; try the gt68xx backend otherwise | artec_eplus48u (v0.0.10) | sane-artec_eplus48u
MD9693 | USB | beta |  | artec_eplus48u (v0.0.10) | sane-artec_eplus48u
MD9705 | USB | beta |  | artec_eplus48u (v0.0.10) | sane-artec_eplus48u

### Manufacturer: Memorex

Link(s): http://www.artecusa.com/

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
MEM 48U | USB | beta | Different product id: 0x4005 | artec_eplus48u (v0.0.10) | sane-artec_eplus48u

### Manufacturer: Microtek

Link(s): http://www.microtek.com/

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
Color PageWiz | SCSI (Parport) | beta | sheet-fed (preliminary, see mapage) | microtek (v0.13.1) | sane-microtek
Phantom 330CX | Parport | stable |  | microtek2 (v0.95) | sane-microtek2
Phantom 636 | SCSI | stable |  | microtek2 (v0.95) | sane-microtek2
Phantom 636CX | Parport | stable |  | microtek2 (v0.95) | sane-microtek2
Scanmaker 35 | SCSI | beta | slide-scanner | microtek (v0.13.1) | sane-microtek
Scanmaker 35t+ | SCSI | beta | slide-scanner | microtek (v0.13.1) | sane-microtek
Scanmaker 45t | SCSI | beta | slide-scanner | microtek (v0.13.1) | sane-microtek
ScanMaker 330 | SCSI | alpha |  | microtek2 (v0.95) | sane-microtek2
Scanmaker 600G(S) | SCSI | alpha | gray only (see manpage) | microtek (v0.13.1) | sane-microtek
Scanmaker 600Z(S) | SCSI | untested |  | microtek (v0.13.1) | sane-microtek
ScanMaker 630 | SCSI | alpha |  | microtek2 (v0.95) | sane-microtek2
ScanMaker 636 | SCSI | stable |  | microtek2 (v0.95) | sane-microtek2
ScanMaker 3600 | USB | alpha | works | sm3600 (v0.1) | sane-sm3600
ScanMaker 3630 | USB | unsupported | Unsupported. Doesn't seem to be compatible to 3600 series, see link. | unsupported (v2003-05-25) | ?
ScanMaker 3700 | USB | alpha | works | sm3600 (v0.1) | sane-sm3600
ScanMaker 3750 | USB | alpha | works (told) | sm3600 (v0.1) | sane-sm3600
ScanMaker 3800 | USB | unsupported | Unsupported. Vendor/Product ids: 0x05da/0x30ce. Seems to be based on the SQ Scan08 chip. See link to spec sheet. | unsupported (v2003-05-25) | ?
ScanMaker 4800 | USB | unsupported | Unsupported. Vendor/Product ids: 0x05da/0x30cf. Looks very similar to the ScanMaker 3800. Maybe the same chip is used? | unsupported (v2003-05-25) | ?
ScanMaker 9600XL | SCSI | alpha |  | microtek2 (v0.95) | sane-microtek2
ScanMaker 9600XL | SCSI | stable | only flatbed mode ? | microtek2 (v0.95) | sane-microtek2
Scanmaker E2 | SCSI | beta | 3-pass | microtek (v0.13.1) | sane-microtek
Scanmaker E3 | SCSI | beta |  | microtek (v0.13.1) | sane-microtek
ScanMaker E3plus | SCSI | stable |  | microtek2 (v0.95) | sane-microtek2
ScanMaker E3plus | Parport | stable |  | microtek2 (v0.95) | sane-microtek2
Scanmaker E6 | SCSI | stable |  | microtek (v0.13.1) | sane-microtek
Scanmaker II | SCSI | beta | 3-pass | microtek (v0.13.1) | sane-microtek
Scanmaker IIG | SCSI | beta | gray only | microtek (v0.13.1) | sane-microtek
Scanmaker IIHR | SCSI | beta | 3-pass | microtek (v0.13.1) | sane-microtek
Scanmaker III | SCSI | beta |  | microtek (v0.13.1) | sane-microtek
Scanmaker IISP | SCSI | beta |  | microtek (v0.13.1) | sane-microtek
ScanMaker V6USL | USB | stable |  | microtek2 (v0.95) | sane-microtek2
ScanMaker V6USL | SCSI | stable |  | microtek2 (v0.95) | sane-microtek2
ScanMaker V300 | Parport | beta |  | microtek2 (v0.95) | sane-microtek2
ScanMaker V300 | SCSI | beta |  | microtek2 (v0.95) | sane-microtek2
ScanMaker V310 | Parport | alpha |  | microtek2 (v0.95) | sane-microtek2
ScanMaker V310 | SCSI | alpha |  | microtek2 (v0.95) | sane-microtek2
ScanMaker V600 | Parport | alpha |  | microtek2 (v0.95) | sane-microtek2
ScanMaker V600 | SCSI | alpha |  | microtek2 (v0.95) | sane-microtek2
ScanMaker X6 | SCSI | stable |  | microtek2 (v0.95) | sane-microtek2
ScanMaker X6EL | SCSI | alpha |  | microtek2 (v0.95) | sane-microtek2
ScanMaker X6USB | USB | beta |  | microtek2 (v0.95) | sane-microtek2
ScanMaker X12USL | SCSI | beta | only Flatbed mode ? | microtek2 (v0.95) | sane-microtek2
ScanPort 3000 | USB | unsupported | Unsupported. Vendor/Product ids: 0x04a7/0x0224. Seems to use Realtek RTS8801B. Same as Visioneer OneTouch 4800. See link for details. | unsupported (v2003-05-25) | ?
SlimScan C3 | Parport | stable |  | microtek2 (v0.95) | sane-microtek2
SlimScan C6 | USB | stable |  | microtek2 (v0.95) | sane-microtek2

### Manufacturer: Minolta

Link(s): http://www.minolta.com

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
Elite II | USB | untested | 1 pass, film-scanner | avision (vBuild: 70) | sane-avision
FS-V1 | USB | alpha | 1 pass, film-scanner | avision (vBuild: 70) | sane-avision

### Manufacturer: Mitsubishi

Link(s): http://www.mitsubishi.com

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
Diamondview 648UT | USB | stable | Rebadged Benq 320u. | SnapScan (v1.4) | sane-snapscan
Diamondview 650U | USB | stable | Rebadged Benq 4300. | SnapScan (v1.4) | sane-snapscan
MCA-ADFC | SCSI | untested |  | avision (vBuild: 70) | sane-avision
S600C | SCSI | untested |  | avision (vBuild: 70) | sane-avision
S1200C | SCSI | untested |  | avision (vBuild: 70) | sane-avision
SS600 | SCSI | beta |  | avision (vBuild: 70) | sane-avision

### Manufacturer: Mustek

Link(s): http://www.mustek.com/, http://www.mustek.com.tw/, http://www.mustek.de/

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
600 III EP Plus | Parport (EPP) | alpha | 300 dpi CCD scanner | mustek_pp (v12) | sane-mustek_pp
1800 A3 Pro-1 | USB | unsupported | Not supported but someone wants to start writing a backend. See link. Vendor/Product ids: 0x055f/0x0401. No information about this scanner on any Mustek website. | unsupported (v2003-05-25) | ?
2400 M | USB | unsupported | Probably unsupported. No details known. | unsupported (v2003-05-25) | ?
BearPaw 1200 | USB | stable |  | plustek (v0.45) | sane-plustek
BearPaw 1200 CS | USB | beta |  | gt68xx (v1.0-46) | sane-gt68xx
BearPaw 1200 CU | USB | beta |  | gt68xx (v1.0-46) | sane-gt68xx
BearPaw 1200 CU Plus | USB | beta |  | gt68xx (v1.0-46) | sane-gt68xx
BearPaw 1200 F | USB | alpha | Works upto 600 dpi. No support for TA and ADF yet. | ma1509 (v1.0-2, NEW!) | sane-ma1509
BearPaw 1200 TA | USB | beta | Transparency adapter supported | gt68xx (v1.0-46) | sane-gt68xx
BearPaw 1248CU | USB | unsupported | Probably unsupported. No details known. | unsupported (v2003-05-25) | ?
BearPaw 2400 | USB | stable | Mostly OK | plustek (v0.45) | sane-plustek
BearPaw 2400 CS | USB | untested | probably works, reports are welcome | gt68xx (v1.0-46) | sane-gt68xx
BearPaw 2400 CS Plus | USB | beta | works, problems with 12/16 bit modes? | gt68xx (v1.0-46) | sane-gt68xx
BearPaw 2400 CU | USB | alpha | works, but is slow | gt68xx (v1.0-46) | sane-gt68xx
BearPaw 2400 CU Plus | USB | beta |  | gt68xx (v1.0-46) | sane-gt68xx
BearPaw 2400 TA | USB | beta | Transparency adapter supported | gt68xx (v1.0-46) | sane-gt68xx
BearPaw 2400 TA Plus | USB | beta | Transparency adapter supported | gt68xx (v1.0-46) | sane-gt68xx
BearPaw 2400 TA Pro | USB | unsupported | Not supported. See link for some information. | unsupported (v2003-05-25) | ?
BearPaw 4800 TA Pro | USB | unsupported | Not supported. See link for some information. | unsupported (v2003-05-25) | ?
P 3600 A3 Pro | USB | unsupported | Not supported. Maybe similar to the 1800 A3 Pro-1?. See link. | unsupported (v2003-05-25) | ?
Paragon 600 II CD | SCSI | stable |  | mustek (v1.0-132) | sane-mustek
Paragon 600 II ED/EP | Parport | unsupported | Not supported. SCSI over Parport. | unsupported (v2003-05-25) | ?
Paragon 600 II N | Proprietary | stable |  | mustek (v1.0-132) | sane-mustek
Paragon 800 II SP | SCSI | stable |  | mustek (v1.0-132) | sane-mustek
Paragon 1200 A3 Pro | SCSI | stable |  | mustek (v1.0-132) | sane-mustek
Paragon 1200 III SP | SCSI | stable |  | mustek (v1.0-132) | sane-mustek
Paragon 1200 LS | SCSI | stable |  | mustek (v1.0-132) | sane-mustek
Paragon 1200 SP Pro | SCSI | stable |  | mustek (v1.0-132) | sane-mustek
Paragon MFC-600S | SCSI | stable |  | mustek (v1.0-132) | sane-mustek
Paragon MFC-800S | SCSI | stable |  | mustek (v1.0-132) | sane-mustek
Paragon MFS-1200SP | SCSI | stable |  | mustek (v1.0-132) | sane-mustek
Paragon MFS-6000CX | SCSI | stable | 3-pass | mustek (v1.0-132) | sane-mustek
Paragon MFS-6000SP | SCSI | stable |  | mustek (v1.0-132) | sane-mustek
Paragon MFS-8000SP | SCSI | stable |  | mustek (v1.0-132) | sane-mustek
Paragon MFS-12000CX | SCSI | stable | 3-pass | mustek (v1.0-132) | sane-mustek
Paragon MFS-12000SP | SCSI | stable |  | mustek (v1.0-132) | sane-mustek
ScanExpress 600 CP | Parport (EPP) | beta | CIS scanner | mustek_pp (v12) | sane-mustek_pp
ScanExpress 600 CU | USB | stable |  | mustek_usb (v1.0-16) | sane-mustek_usb
ScanExpress 600 SEP | Parport (EPP) | alpha | 300 dpi CCD scanner | mustek_pp (v12) | sane-mustek_pp
ScanExpress 600 USB | USB | unsupported | Unsupported. Vendor/Product 0x055f/0x873. Programming information is available. | unsupported (v2003-05-25) | ?
ScanExpress 1200 CP | Parport (EPP) | beta | CIS scanner | mustek_pp (v12) | sane-mustek_pp
ScanExpress 1200 CP+ | Parport (EPP) | beta | CIS scanner | mustek_pp (v12) | sane-mustek_pp
ScanExpress 1200 CU | USB | stable |  | mustek_usb (v1.0-16) | sane-mustek_usb
ScanExpress 1200 CU Plus | USB | stable |  | mustek_usb (v1.0-16) | sane-mustek_usb
ScanExpress 1200 UB | USB | stable | For the UB Plus, see gt68xx backend | mustek_usb (v1.0-16) | sane-mustek_usb
ScanExpress 1200 UB Plus | USB | beta |  | gt68xx (v1.0-46) | sane-gt68xx
ScanExpress 1200 USB | USB | unsupported | Unsupported. Vendor/Product 0x055f/0x0003. Programming information is available. | unsupported (v2003-05-25) | ?
ScanExpress 1200 USB Plus | USB | unsupported | Unsupported. Vendor/Product 0x055f/0x0007. | unsupported (v2003-05-25) | ?
ScanExpress 2400 USB | USB | untested | Should be detected but may need some more work in the code. Testers welcome. | gt68xx (v1.0-46) | sane-gt68xx
ScanExpress 6000 P | Parport (EPP) | alpha | 300 dpi CCD scanner | mustek_pp (v12) | sane-mustek_pp
ScanExpress 6000SP | SCSI | stable |  | mustek (v1.0-132) | sane-mustek
ScanExpress 12000 P | Parport | unsupported | Not supported. Asic 1505/05. | unsupported (v2003-05-25) | ?
ScanExpress 12000SP | SCSI | stable |  | mustek (v1.0-132) | sane-mustek
ScanExpress 12000SP Plus | SCSI | stable |  | mustek (v1.0-132) | sane-mustek
ScanExpress A3 SP | SCSI | beta | Please test! | mustek (v1.0-132) | sane-mustek
ScanExpress A3 USB | USB | alpha | Calibration may be wrong. Please contact me if you have such a device. | gt68xx (v1.0-46) | sane-gt68xx
ScanExpress CardSmart | USB | unsupported | Probably unsupported. USB business card scanner. Maybe works as USB storage device? | unsupported (v2003-05-25) | ?
ScanMagic 600 CP | Parport (EPP) | beta | CIS scanner | mustek_pp (v12) | sane-mustek_pp
ScanMagic 600 II SP | SCSI | stable |  | mustek (v1.0-132) | sane-mustek
ScanMagic 4800 P | Parport (EPP) | alpha | 300 dpi CCD scanner | mustek_pp (v12) | sane-mustek_pp
ScanMagic 9636P | Parport | unsupported | Probably not supported. Same as Mustek 12000 P?. ASIC 1505. | unsupported (v2003-05-25) | ?
ScanMagic 9636S | SCSI | stable |  | mustek (v1.0-132) | sane-mustek
ScanMagic 9636S Plus | SCSI | stable |  | mustek (v1.0-132) | sane-mustek

### Manufacturer: NEC

Link(s): http://www.nevt.co.jp/

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
PC-IN500/4C | SCSI | beta | PC-IN500/4C was sold only in JAPAN | nec (v0.12) | sane-nec

### Manufacturer: Nikon

Link(s): http://www.nikon.com/

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
AX-110 / Scantouch 110 | SCSI | untested | may work, please test and give feedback | umax (v1.0-37) | sane-umax
AX-210 | SCSI | stable | OK | umax (v1.0-37) | sane-umax
LS 30 | SCSI | beta | working -- model available to developer | coolscan2 (v0.1.8) | sane-coolscan2
LS 40 ED | USB | beta |  | coolscan2 (v0.1.8) | sane-coolscan2
LS 2000 | SCSI | beta |  | coolscan2 (v0.1.8) | sane-coolscan2
LS 4000 ED | IEEE1394 | beta | needs linux kernel 2.4.19 or later | coolscan2 (v0.1.8) | sane-coolscan2
LS 8000 ED | IEEE1394 | beta | needs linux kernel 2.4.19 or later | coolscan2 (v0.1.8) | sane-coolscan2
LS-20 | SCSI | alpha | The LS-20 has been replaced by the LS-30 | coolscan (v0.4.3) | sane-coolscan
LS-30 | SCSI | alpha | alpha: only 24/30 bit RGB + 32/40 bit RGBI | coolscan (v0.4.3) | sane-coolscan
LS-1000 | SCSI | alpha | Doesn't support gamma correction | coolscan (v0.4.3) | sane-coolscan
LS-2000 | SCSI | alpha | alpha: only 24/36 bit + RGB 32/48 bit RGBI | coolscan (v0.4.3) | sane-coolscan

### Manufacturer: Packard Bell

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
Diamond 1200 | USB | beta | similar to Mustek BearPaw 1200 (Plus) | gt68xx (v1.0-46) | sane-gt68xx
Diamond 1200 Plus | USB | beta | similar to Mustek BearPaw 1200 Plus | gt68xx (v1.0-46) | sane-gt68xx

### Manufacturer: Panasonic

Link(s): http://www.panasonic.com/

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
KV-SS25 | SCSI | stable |  | matsushita (v1.0-6) | sane-matsushita
KV-SS25D | SCSI | stable |  | matsushita (v1.0-6) | sane-matsushita
KV-SS50 | SCSI | untested |  | matsushita (v1.0-6) | sane-matsushita
KV-SS50EX | SCSI | untested |  | matsushita (v1.0-6) | sane-matsushita
KV-SS55 | SCSI | untested |  | matsushita (v1.0-6) | sane-matsushita
KV-SS55EX | SCSI | untested |  | matsushita (v1.0-6) | sane-matsushita
KV-SS850 | SCSI | untested |  | matsushita (v1.0-6) | sane-matsushita
KV-SS855 | SCSI | untested |  | matsushita (v1.0-6) | sane-matsushita

### Manufacturer: PIE

Link(s): http://www.scanace.com/
Comment: Pacific Image Electronics

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
Primefilm 1800u | USB | unsupported | Not supported. Vendor/product 0x05e3/0x0120. Is reported to use GeneScan II GL841 chipset. | unsupported (v2003-05-25) | ?
ScanAce 630S | SCSI | untested |  | pie (v1.0) | sane-pie
ScanAce 636S | SCSI | untested |  | pie (v1.0) | sane-pie
ScanAce 1230S | SCSI | stable |  | pie (v1.0) | sane-pie
ScanAce 1236S | SCSI | stable |  | pie (v1.0) | sane-pie
ScanAce II | SCSI | untested |  | pie (v1.0) | sane-pie
ScanAce II Plus | SCSI | untested |  | pie (v1.0) | sane-pie
ScanAce III | SCSI | untested |  | pie (v1.0) | sane-pie
ScanAce III Plus | SCSI | untested |  | pie (v1.0) | sane-pie
ScanAce Plus | SCSI | untested |  | pie (v1.0) | sane-pie
ScanAce ScanMedia | SCSI | untested |  | pie (v1.0) | sane-pie
ScanAce ScanMedia II | SCSI | untested |  | pie (v1.0) | sane-pie
ScanAce V | SCSI | untested |  | pie (v1.0) | sane-pie

### Manufacturer: PIOTECH

Link(s): http://www.image-land.com/

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
Splendeur 3024 | SCSI | beta | sub model VM3552 | teco3 (v1.0-1) | sane-teco3

### Manufacturer: Plustek

Link(s): http://www.plustek.com/, http://www.plustek.de/

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
OpticPro 600P/6000P | Parport (SPP, EPP) | stable |  | plustek (v0.45) | sane-plustek
OpticPro 1212U | USB | unsupported | Vendor/product: 0x07b3/0x0001. Same ids as early U12/UT12 models, maybe the same chip? | unsupported (v2003-05-25) | ?
OpticPro 1236P | Parport (SPP, EPP) | stable | reported as OpticPro 12000P/96000P | plustek (v0.45) | sane-plustek
OpticPro 1248U | USB | beta | Works up to 600 dpi | gt68xx (v1.0-46) | sane-gt68xx
OpticPro 2400SP | SCSI | untested | sub model VM3552 | teco3 (v1.0-1) | sane-teco3
OpticPro 4800P | Parport (SPP, EPP) | stable |  | plustek (v0.45) | sane-plustek
OpticPro 4830P | Parport (SPP, EPP) | stable |  | plustek (v0.45) | sane-plustek
OpticPro 4831P | Parport (SPP, EPP) | stable |  | plustek (v0.45) | sane-plustek
OpticPro 9600P | Parport (SPP, EPP) | stable |  | plustek (v0.45) | sane-plustek
OpticPro 9630P | Parport (SPP, EPP) | stable |  | plustek (v0.45) | sane-plustek
OpticPro 9630PL | Parport (SPP, EPP) | stable | use driver-switch mov=1 | plustek (v0.45) | sane-plustek
OpticPro 9636P | Parport (SPP, EPP) | stable | use driver-switch mov=4 | plustek (v0.45) | sane-plustek
OpticPro 9636P+/Turbo | Parport (SPP, EPP) | stable | use driver-switch mov=3 | plustek (v0.45) | sane-plustek
OpticPro 9636T | Parport (SPP, EPP) | stable |  | plustek (v0.45) | sane-plustek
OpticPro 12000P/96000P | Parport (SPP, EPP) | stable |  | plustek (v0.45) | sane-plustek
OpticPro 12000T | Parport (SPP, EPP) | stable |  | plustek (v0.45) | sane-plustek
OpticPro 19200S | SCSI | stable | rebadged Artec AM12S | artec (v0.5.16) | sane-artec
OpticPro A3U | USB | unsupported | Uses Plustek ASIC P99002 | unsupported (v2003-05-25) | ?
OpticPro AI3 | Parport (SPP, EPP) | beta | use driver-switch mov=5, poor picture quality | plustek (v0.45) | sane-plustek
OpticPro P8 | Parport | untested |  | plustek (v0.45) | sane-plustek
OpticPro P12 | Parport (SPP, EPP) | stable |  | plustek (v0.45) | sane-plustek
OpticPro PT12 | Parport (SPP, EPP) | stable |  | plustek (v0.45) | sane-plustek
OpticPro S6 | USB | unsupported | Uses RealTek chipset (RTL8801D) | unsupported (v2003-05-25) | ?
OpticPro S12 | USB | unsupported | Uses the Genesys Logic GL646 chipset. | unsupported (v2003-05-25) | ?
OpticPro S24 | USB | unsupported | Uses the Genesys Logic GL646 chipset. | unsupported (v2003-05-25) | ?
OpticPro U12 | USB | stable | NOTE: Devices with product ID 0x0001 are not supported! | plustek (v0.45) | sane-plustek
OpticPro U12/UT12 | USB | unsupported | All devices using product ID 0x0001 are not supported, for others see Plustek backend. The older models seem to use a P98003 parallel port ASIC and a GenesysLogic parport-over USB brigde. The P98003 is also used by the P12 and PT12 models. | unsupported (v2003-05-25) | ?
OpticPro U24 | USB | stable |  | plustek (v0.45) | sane-plustek
OpticPro UT12 | USB | stable | Note: Devices with product ID 0x0001 are not supported! | plustek (v0.45) | sane-plustek
OpticPro UT16 | USB | stable |  | plustek (v0.45) | sane-plustek
OpticPro UT16B | USB | untested | Isn't detected yet but may work some time in future. Testers welcome. | gt68xx (v1.0-46) | sane-gt68xx
OpticPro UT24 | USB | stable |  | plustek (v0.45) | sane-plustek
Spectra ADF | Proprietary | unsupported | Unsupported. Uses proprietary ISA card that also provides power and is labelled GPS-1 PAGE-A from Taiwan. Other labels on the scanner include ADF Color Scanner and SF600AS. Maybe the same as the IBM ADF Color Scanner? | unsupported (v2003-05-25) | ?

### Manufacturer: Primax

Link(s): http://www.primax.nl/

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
Colorado 2400U | USB | unsupported | Probably unsupported. ASIC EICI 10440A. Vendor/product 0x461/0x346. May work with viceo backend(?), see link. | unsupported (v2003-05-25) | ?
Colorado 4800 | Parport (SPP, EPP) | untested | same as OpticPro 4800P | plustek (v0.45) | sane-plustek
Colorado Direct 600 | Parport | unsupported | Not supported. However, a stand-alone program is available. | unsupported (v2003-05-25) | ?
Colorado Direct 9600 | Parport | unsupported | Not supported. However, a stand-alone program is available. | unsupported (v2003-05-25) | ?
Compact 4800 Direct | Parport (SPP, EPP) | stable | use driver-switch mov=2 | plustek (v0.45) | sane-plustek
Compact 4800 Direct-30 | Parport (SPP, EPP) | untested | same as OpticPro 4830P | plustek (v0.45) | sane-plustek
Compact 4800 SCSI | SCSI | stable | Mustek 600 II CD compatible | mustek (v1.0-132) | sane-mustek
Compact 9600 Direct-30 | Parport (SPP, EPP) | stable | same as OpticPro 9630P | plustek (v0.45) | sane-plustek
Jewel 4800 | SCSI | alpha | sub model VM356A | teco2 (v1.0-5) | sane-teco2
Primascan Colorado 2600u | USB | unsupported | Unsupported. See Visioneer Primascan Onetouch 4800. | unsupported (v2003-05-25) | ?
Profi 9600 | SCSI | alpha | sub model VM6575 | teco2 (v1.0-5) | sane-teco2
Profi 19200 | SCSI | beta | sub model VM6586 | teco2 (v1.0-5) | sane-teco2
Slim-Line 1200 | USB | unsupported | Probably unsupported. Vendor/product maybe 0x0461/0x0377. Maybe the same as Medion MD 6228/MD 5345 | unsupported (v2003-05-25) | ?

### Manufacturer: Prolink

Link(s): http://www.fida.com/

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
Winscan Pro 2448U | USB | unsupported | Not supported. Some information is available. Vendor=0x06dc product=0x0014. Is reported to use an RealTek RTS8801 chipset. | unsupported (v2003-05-25) | ?

### Manufacturer: Reflecta

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
DigitDia 3600 | USB IEEE-1394 | unsupported | Probably unsupported. Film scanner that can scan directly from the magazine. | unsupported (v2003-05-25) | ?

### Manufacturer: Relisys

Link(s): http://www.relisys.com/, http://www.tecoimage.com.tw/

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
APOLLO Express 3 | SCSI | alpha | sub model VM356A | teco2 (v1.0-5) | sane-teco2
APOLLO Express 6 | SCSI | beta | sub model VM6565 | teco2 (v1.0-5) | sane-teco2
AVEC 2400 | SCSI | stable | sub model VM3520 | teco1 (v1.0-9) | sane-teco1
AVEC 2412 | SCSI | untested | sub model VM3520+ | teco1 (v1.0-9) | sane-teco1
AVEC 4800 | SCSI | untested | sub model VM4530 | teco1 (v1.0-9) | sane-teco1
AVEC 4816 | SCSI | untested | sub model VM4530+ | teco1 (v1.0-9) | sane-teco1
AVEC II S3 | SCSI | alpha | sub model VM3564 | teco2 (v1.0-5) | sane-teco2
AVEC Super 3 | SCSI | untested | sub model VM3575 | teco2 (v1.0-5) | sane-teco2
Infinity Scorpio | SCSI | beta | sub model VM3552 | teco3 (v1.0-1) | sane-teco3
RELI 2400 | SCSI | untested | sub model VM3530 | teco1 (v1.0-9) | sane-teco1
RELI 2412 | SCSI | stable | sub model VM3530+ | teco1 (v1.0-9) | sane-teco1
RELI 4816 | SCSI | untested | sub model VM4540 | teco1 (v1.0-9) | sane-teco1
RELI 4830 | SCSI | beta | sub model VM4542 | teco1 (v1.0-9) | sane-teco1
RELI 9600 | SCSI | untested | sub model VM6530 | teco1 (v1.0-9) | sane-teco1
RELI 9612 | SCSI | untested | sub model VM6530* | teco1 (v1.0-9) | sane-teco1
RELI 9624 | SCSI | untested | sub model VM6530+ | teco1 (v1.0-9) | sane-teco1
RELI 9630 | SCSI | untested | sub model VM6540 | teco1 (v1.0-9) | sane-teco1
RELI DS6 | SCSI | untested | sub model VM3420 | teco1 (v1.0-9) | sane-teco1
RELI DS15 | SCSI | untested | sub model VM3440 | teco1 (v1.0-9) | sane-teco1
SCORPIO Pro | SCSI | beta | sub model VM6575 | teco2 (v1.0-5) | sane-teco2
SCORPIO Pro-S | SCSI | untested | sub model VM6586 | teco2 (v1.0-5) | sane-teco2
SCORPIO Super 3 | SCSI | alpha | sub model VM3575 | teco2 (v1.0-5) | sane-teco2

### Manufacturer: Ricoh

Link(s): http://www.ricoh.com/

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
IS-410 | SCSI | untested | Untested, please report! | ibm (v1.0-4, NEW!) | sane-ibm
IS-420 | SCSI | alpha | Works at least in flatbed mode. | ibm (v1.0-4, NEW!) | sane-ibm
IS-430 | SCSI | untested | Untested, please report! | ibm (v1.0-4, NEW!) | sane-ibm
Ricoh IS50 | SCSI | alpha |  | ricoh | sane-ricoh
Ricoh IS60 | SCSI | alpha |  | ricoh | sane-ricoh

### Manufacturer: Scanport

Link(s): http://www.scanport.com/

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
SQ300 | Parport? | alpha |  | microtek2 (v0.95) | sane-microtek2
SQ2030 | Parport | alpha |  | microtek2 (v0.95) | sane-microtek2
SQ4836 | SCSI | alpha |  | microtek2 (v0.95) | sane-microtek2

### Manufacturer: Sceptre

Link(s): http://www.sceptre.com/

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
Vividscan S1200 | SCSI | beta |  | sceptre (v1.0-10) | sane-sceptre

### Manufacturer: Sharp

Link(s): http://sharp-world.com/

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
JX-250 | SCSI | beta |  | sharp (v0.32) | sane-sharp
JX-320 | SCSI | beta |  | sharp (v0.32) | sane-sharp
JX-325 | SCSI | untested |  | sharp (v0.32) | sane-sharp
JX-330 | SCSI | beta |  | sharp (v0.32) | sane-sharp
JX-350 | SCSI | beta |  | sharp (v0.32) | sane-sharp
JX-610 | SCSI | beta |  | sharp (v0.32) | sane-sharp

### Manufacturer: Siemens

Link(s): http://www.siemens.com/, http://www.siemens.de/

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
9036 Flatbed scanner | SCSI | alpha |  | s9036 | sane-s9036
S9036 | SCSI | untested | gray only | agfafocus (v0.2) | sane-agfafocus
ST400 | SCSI | alpha | 6 bit gray | st400 (v1.6) | sane-st400
ST800 | SCSI | alpha | 6 bit gray | st400 (v1.6) | sane-st400

### Manufacturer: Spot Technology

Comment: Spot seems have gone out of business.

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
Maxiscan A4 | proprietary | unsupported | Not supported until now. Work on a backend has started, see link for more information. | unsupported (v2003-05-25) | ?
ScanTak 2c | SCSI | unsupported | Not supported. See link for more information. | unsupported (v2003-05-25) | ?
ScanTak 3c | SCSI | unsupported | Not supported. See link for more information. | unsupported (v2003-05-25) | ?

### Manufacturer: Syscan

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
TravelScan 460/464 | USB | unsupported | Not supported. Some information is available. May work with the Plustek backend in future. | unsupported (v2003-05-25) | ?

### Manufacturer: Tamarack

Link(s): http://www.tamarack.net/

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
Artiscan 6000C | SCSI | beta | 3 pass, 300 DPI | tamarack (v0.5) | sane-tamarack
Artiscan 8000C | SCSI | beta | 3 pass, 400 DPI | tamarack (v0.5) | sane-tamarack
Artiscan 12000C | SCSI | beta | 3 pass, 600 DPI | tamarack (v0.5) | sane-tamarack

### Manufacturer: Targa

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
Funline TS6 EP | Parport (EPP) | beta | CIS scanner | mustek_pp (v12) | sane-mustek_pp
Funline TS12 EP | Parport (EPP) | beta | CIS scanner | mustek_pp (v12) | sane-mustek_pp

### Manufacturer: Trust

Link(s): http://www.trust-site.com, http://www.trust-site.com/home/
Comment: Carefully check the model names. Trust uses similar names for completely different hardware.

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
CombiScan 19200 | Parport USB | unsupported | Unsupported. Vendor/product 0x5cb, 0x1483 according to linux-usb.org. Same ids as Boeder Sm@rtScan Office. The vendor is PowerVision Technologies, Inc. Maybe also a PV8630 as in the UMAX 1200U? | unsupported (v2003-05-25) | ?
Compact Scan USB 19200 | USB | stable | Mustek 1200 UB compatible | mustek_usb (v1.0-16) | sane-mustek_usb
Compact Scan USB 19200 | USB | beta | works, if you have vendor id 0x055f and product id 0x0006, use the mustek_usb backend instead, similar to Mustek ScanExpress 1200 UB (Plus) | gt68xx (v1.0-46) | sane-gt68xx
Easy Connect 9600+ | Parport (EPP) | beta | CIS scanner | mustek_pp (v12) | sane-mustek_pp
Easy Webscan 19200 | USB | beta | Different product id: 0x4006 | artec_eplus48u (v0.0.10) | sane-artec_eplus48u
Flat Scan USB 19200 | USB | beta | Similar to Artec Ultima 2000 | gt68xx (v1.0-46) | sane-gt68xx
Imagery 1200 | SCSI | stable | 3-pass, Mustek Paragon MFS-6000CX compatible | mustek (v1.0-132) | sane-mustek
Imagery 1200 SP | SCSI | stable | Mustek Paragon MFS-6000SP compatible | mustek (v1.0-132) | sane-mustek
Imagery 2400 SP | SCSI | beta | sub model VM3552 | teco3 (v1.0-1) | sane-teco3
Imagery 4800 SP | SCSI | stable | Mustek Paragon 500 II CD compatible | mustek (v1.0-132) | sane-mustek
Imagery 4800 SP+ | SCSI | beta | sub model VM3552 | teco3 (v1.0-1) | sane-teco3
Imagery 9600 SP | SCSI | untested | sub model VM3552 | teco3 (v1.0-1) | sane-teco3
SCSI Connect 19200 | SCSI | stable | Mustek ScanExpress 12000SP compatible | mustek (v1.0-132) | sane-mustek
SCSI excellence series 19200 | SCSI | stable | Mustek ScanExpress 12000SP compatible | mustek (v1.0-132) | sane-mustek

### Manufacturer: UMAX

Link(s): http://www.umax.com/, http://www.umax.com.tw/, http://www.umax.de/en, http://www.umax-europe.com, http://www.umaxjapan.co.jp, http://www.umax.com.cn

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
Astra 600S | SCSI | stable | OK | umax (v1.0-37) | sane-umax
Astra 610P | Parport (EPP) | unsupported | don't work (yet) | umax_pp (v1) | sane-umax_pp
Astra 610S | SCSI | stable | OK | umax (v1.0-37) | sane-umax
Astra 1200S | SCSI | stable | OK | umax (v1.0-37) | sane-umax
Astra 1220P | Parport (EPP) | beta | works | umax_pp (v1) | sane-umax_pp
Astra 1220S | SCSI | stable | OK | umax (v1.0-37) | sane-umax
Astra 1220U | USB | stable | OK | umax1220u (v1.0.1) | sane-umax1220u
Astra 1600P | Parport (EPP) | beta | works | umax_pp (v1) | sane-umax_pp
Astra 2000P | Parport (EPP) | beta | works | umax_pp (v1) | sane-umax_pp
Astra 2000U | USB | beta | Sort of scans, but colors all messed up. | umax1220u (v1.0.1) | sane-umax1220u
Astra 2100S | SCSI | stable | OK | umax (v1.0-37) | sane-umax
Astra 2200 (SU) | USB | stable | OK, needs USB control messages | umax (v1.0-37) | sane-umax
Astra 2200 (SU) | SCSI | stable | OK | umax (v1.0-37) | sane-umax
Astra 2200U | USB | unsupported | Incompatible. | umax1220u (v1.0.1) | sane-umax1220u
Astra 2400S | SCSI | stable | OK | umax (v1.0-37) | sane-umax
Astra 4500 | USB | unsupported | Not supported. Vendor/product 0x0638/0x0a10. Is reported to use GeneScan II GL646 chipset. Same as Avision iVina FB1600. | unsupported (v2003-05-25) | ?
Astra 4700 | USB | unsupported | Not supported. Is reported to use a Genesys Logic GL660USB chip (Parport to USB converter, see link) and the Avision B2 chipset. Same as Avision iVina FB1800. | unsupported (v2003-05-25) | ?
Astra 6400 | IEEE-1394 | unsupported | will propably work one day | umax (v1.0-37) | sane-umax
Astra 6450 | IEEE-1394 | unsupported | will propably work one day | umax (v1.0-37) | sane-umax
Astra 6700 | USB | unsupported | Not supported. No chipset information available. Same as Avision iVina FB2400. | unsupported (v2003-05-25) | ?
Astra MX3 | USB | stable | OK, needs USB control messages | umax (v1.0-37) | sane-umax
Astra MX3 | SCSI | stable | OK | umax (v1.0-37) | sane-umax
AstraSlim SE | USB | beta | Different product id: 0x4009 | artec_eplus48u (v0.0.10) | sane-artec_eplus48u
Gemini D-16 | SCSI | stable | OK | umax (v1.0-37) | sane-umax
Mirage D-16L | SCSI | stable | OK | umax (v1.0-37) | sane-umax
Mirage II | SCSI | stable | OK | umax (v1.0-37) | sane-umax
Mirage IIse | SCSI | untested | may work, please test and give feedback | umax (v1.0-37) | sane-umax
PL-II | SCSI | untested | may work, please test and give feedback | umax (v1.0-37) | sane-umax
PowerLook | SCSI | untested | may work, please test and give feedback | umax (v1.0-37) | sane-umax
PowerLook 270 | SCSI | unsupported | incompatible | umax (v1.0-37) | sane-umax
PowerLook 270plus | SCSI | unsupported | incompatible | umax (v1.0-37) | sane-umax
PowerLook 1100 | IEEE-1394 | unsupported | will propably work one day | umax (v1.0-37) | sane-umax
PowerLook 2000 | SCSI | untested | may work, please test and give feedback | umax (v1.0-37) | sane-umax
PowerLook 2100XL | SCSI | stable | OK | umax (v1.0-37) | sane-umax
PowerLook 3000 | SCSI | stable | OK | umax (v1.0-37) | sane-umax
PowerLook III | SCSI | stable | OK | umax (v1.0-37) | sane-umax
PSD | SCSI | stable | OK | umax (v1.0-37) | sane-umax
Supervista S-12 | SCSI | stable | OK | umax (v1.0-37) | sane-umax
UC 630 | SCSI | stable | Version 2.8 OK, others only lineart OK | umax (v1.0-37) | sane-umax
UC 840 | SCSI | stable | Version 1.6 OK, others only lineart OK | umax (v1.0-37) | sane-umax
UC 1200S | SCSI | untested | may work, please test and give feedback | umax (v1.0-37) | sane-umax
UC 1200SE | SCSI | stable | Version 3.0 OK, others unknown | umax (v1.0-37) | sane-umax
UC 1260 | SCSI | stable | Version 1.6 OK, others unknown | umax (v1.0-37) | sane-umax
UG 80 | SCSI | stable | OK | umax (v1.0-37) | sane-umax
UG 630 | SCSI | stable | OK | umax (v1.0-37) | sane-umax
UMAX 3400 | USB | stable |  | plustek (v0.45) | sane-plustek
UMAX 3450 | USB | stable | TPA not supported | plustek (v0.45) | sane-plustek
UMAX 5400 | USB | stable |  | plustek (v0.45) | sane-plustek
UMAX S-6E | SCSI | stable | OK | umax (v1.0-37) | sane-umax
UMAX S-6EG | SCSI | stable | OK | umax (v1.0-37) | sane-umax
UMAX S-12 | SCSI | stable | OK | umax (v1.0-37) | sane-umax
UMAX S-12G | SCSI | stable | OK | umax (v1.0-37) | sane-umax
UMAX VT600 | SCSI | untested | may work, please test and give feedback | umax (v1.0-37) | sane-umax
Vista S6 | SCSI | stable | OK | umax (v1.0-37) | sane-umax
Vista S6E | SCSI | stable | OK | umax (v1.0-37) | sane-umax
Vista-S8 | SCSI | stable | OK | umax (v1.0-37) | sane-umax
Vista-T630 | SCSI | stable | OK for some firmwareversions, on others only lineart OK | umax (v1.0-37) | sane-umax

### Manufacturer: Visioneer

Link(s): http://www.visioneer.com/

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
6200 | USB | unsupported | Not supported. Is reported to use the E5 chipset. Uses a Primax ID. See link for some details. Looks similar to Primascan Colorado 2600u. | unsupported (v2003-05-25) | ?
Onetouch 4400 | USB | unsupported | Not supported. Is reported to use LM9832 (or LM9830 + E5) (=GL640usb)???. Same scanner as Primax/visioneer Primascan Colorado 2600u. Vendor/product 0x0461/0x0347 (Primax!). One bulk-in and one bulk-out ep. See link for more details. Maybe it can be supported by the canon630u backend? | unsupported (v2003-05-25) | ?
OneTouch 4800 USB | USB | unsupported | Unsupported. Vendor/Product ids: 0x04a7/0x0224. Seems to use Realtek RTS8801B. Same as Microtek Scanport 3000. See link for details. | unsupported (v2003-05-25) | ?
OneTouch 5300 USB | USB | unsupported | Not supported. Vendor/product ids 0x04a7/0x0226. See link for output of /proc/bus/usb/devices. The output looks very similar to that of the 8920. | unsupported (v2003-05-25) | ?
Onetouch 8920 | USB | unsupported | Not supported. Same as 8700 and 8900 but includes a TA. Uses a Primax ID. See link for output of /proc/bus/usb/devices. | unsupported (v2003-05-25) | ?
Primascan Colorado 2600u | USB | unsupported | Not supported. See Visioneer Onetouch 4400. | unsupported (v2003-05-25) | ?

### Manufacturer: Viviscan

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
Compact II | Parport (EPP) | alpha | 300 dpi CCD scanner | mustek_pp (v12) | sane-mustek_pp

### Manufacturer: Vobis

Link(s): http://www.vobis.de/

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
HighScan | SCSI | stable | only E3plus based models | microtek2 (v0.95) | sane-microtek2
Highscreen Scanboostar Premium | SCSI | stable | OK, SCSI-ID=LinoHell Office2 | umax (v1.0-37) | sane-umax

### Manufacturer: Vuego

Comment: Company was renamed to Benq.

## Still Cameras

Manufacturers: Kodak, Polaroid

### Manufacturer: Kodak

Link(s): http://www.kodak.com/global/en/service/digCam/dc25/dc25.shtml, http://www.kodak.com/global/en/service/digCam/dc210/dc210.shtml, http://www.kodak.com/global/en/service/products/ekn006568.jhtml

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
DC20 | Serial port | beta | DC-20 untested by author but reported to work | dc25 (v1.2) | sane-dc25
DC25 | Serial port | beta |  | dc25 (v1.2) | sane-dc25
DC210 | Serial port | alpha |  | dc210 (v0.0) | sane-dc210
DC240 | Serial port | alpha |  | dc240 (v0.0) | sane-dc240

### Manufacturer: Polaroid

Link(s): http://www.polaroid.com/

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
DMC | SCSI | stable |  | dmc (v1.0) | sane-dmc

## Video Cameras

Manufacturers: Connectix

### Manufacturer: Connectix

Link(s): http://www.connectix.com/

Model | Interface | Status | Comment | Backend | Manpage
--- | --- | --- | --- | --- | ---
Color QuickCam | Parport | alpha | Require root privileges. | qcam | sane-qcam
Greyscale QuickCam | Parport | alpha | Require root privileges. Partly working. | qcam | sane-qcam

## APIs

Backends: gphoto2, pint, pnm, test, v4l

### Backend: gphoto2 (v0.0)

Link(s): mailto:peter@fales-lorenz.net
Manual page: sane-gphoto2
Status: beta
Description: Multiple cameras supported by the gphoto2 libraries
Comment: The long-term plan is to support all the cameras supported by the gphoto2 libraries (currently over 140 models). However, at this stage, only a han dful of cameras are definitely known to work with SANE. Other cameras will probably work if the native file format is EXIF or JPEG. Testers welcome!

### Backend: pint

Manual page: sane-pint
Status: alpha
Description: Scanners with the machine-independent PINT interface

### Backend: pnm (v1.0.8)

Link(s): mailto:henning@meier-geinitz.de
Manual page: sane-pnm
Status: beta
Description: Reads PNM files
Comment: Used for debugging frontends

### Backend: test (v1.0-21)

Link(s): http://www.meier-geinitz.de/sane/test-backend/
Manual page: sane-test
Status: stable
Description: Frontend-tester
Comment: Backend for testing frontends. Also serves as example for SANE backend options.

### Backend: v4l (v1.0-2)

Link(s): mailto:henning@meier-geinitz.de
Manual page: sane-v4l
Status: alpha
Description: Interface to Video For Linux API
Comment: Supports video cameras and other devices accessed by the v4l kernel API, e.g. bttv devices.

## Meta Backends

Backends: dll, net

### Backend: dll (v1.0.8)

Link(s): mailto:henning@meier-geinitz.de
Manual page: sane-dll
Status: stable
Description: Dynamic loading of shared-library backends.

### Backend: net (v1.0.10)

Link(s): http://www.penguin-breeder.org/?page=sane-net
Manual page: sane-net
Status: stable
Description: Network access to saned servers
Comment: Can be used to access any scanner supported by SANE over the net.

### Legend:

> Model:
>   Name of the the device.
> Interface:
>   How the device is connected to the computer.
> Status:
>   A vague indication of robustness and reliability.
>   - unsupported means the device is not supported at least by this backend. It may be supported by other backends, however.
>   - untested means the device may be supported but couldn't be tested. Be very careful.
>   - alpha means it must do something, but is not very well tested, probably has bugs, and may even crash your system, etc., etc.
>   - beta means it works pretty well, and looks stable and functional, but not bullet-proof.
>   - stable means someone is pulling your leg.
> Comment:
>   More information about the level of support and possible problems.
> Backend:
>   Name of the backend, with a link to more extensive and detailed information, if it exists, or the email address of the author or maintainer. In parentheses if available: Version of backend/driver; newer versions may be available from their home sites.
>   NEW! means brand-new to the current release of SANE.
> Manual Page:
>   A link to the man-page on-line, if it exists.
> Description:
>   The scope of application of the backend.

[Back]
This page was last updated on Fri Dec 5 19:44:04 2003