/* -*- Mode: IDL; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* ***** BEGIN LICENSE BLOCK *****
 * Version: MPL 1.1/GPL 2.0/LGPL 2.1
 *
 * The contents of this file are subject to the Mozilla Public License Version
 * 1.1 (the "License"); you may not use this file except in compliance with
 * the License. You may obtain a copy of the License at
 * http://www.mozilla.org/MPL/
 *
 * Software distributed under the License is distributed on an "AS IS" basis,
 * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
 * for the specific language governing rights and limitations under the
 * License.
 *
 * The Original Code is mozilla.org code.
 *
 * The Initial Developer of the Original Code is
 * Netscape Communications Corporation.
 * Portions created by the Initial Developer are Copyright (C) 1998
 * the Initial Developer. All Rights Reserved.
 *
 * Contributor(s):
 *
 * Alternatively, the contents of this file may be used under the terms of
 * either of the GNU General Public License Version 2 or later (the "GPL"),
 * or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
 * in which case the provisions of the GPL or the LGPL are applicable instead
 * of those above. If you wish to allow use of your version of this file only
 * under the terms of either the GPL or the LGPL, and not to allow others to
 * use your version of this file under the terms of the MPL, indicate your
 * decision by deleting the provisions above and replace them with the notice
 * and other provisions required by the GPL or the LGPL. If you do not delete
 * the provisions above, a recipient may use your version of this file under
 * the terms of any one of the MPL, the GPL or the LGPL.
 *
 * ***** END LICENSE BLOCK ***** */

#include "nsISupports.idl"
#include "MailNewsTypes2.idl"
interface nsIURI;
interface nsIUrlListener;
interface nsIStreamListener;
interface nsIMsgWindow;
interface nsIFile;
interface nsIMsgFolder;
interface nsIMsgSearchSession;
interface nsIMsgDBHdr;
interface nsIStreamConverter;
interface nsICacheEntryDescriptor;

%{C++
#include "MailNewsTypes.h"
%}

[scriptable, uuid(ac7b56c2-cf42-4ee3-a3b1-9ae64a90861c)]
interface nsIMsgMessageService : nsISupports {
     
  /**
   * If you want a handle on the running task, pass in a valid nsIURI 
   * ptr. You can later interrupt this action by asking the netlib 
   * service manager to interrupt the url you are given back. 
   * Remember to release aURL when you are done with it. Pass nsnull
   * in for aURL if you don't care about the returned URL.
   */


  /**
   * Pass in the URI for the message you want to have copied.
   *
   * @param aSrcURI
   * @param aCopyListener already knows about the destination folder. 
   * @param aMoveMessage TRUE if you want the message to be moved.
   *                     FALSE leaves it as just a copy.
   * @param aUrlListener 
   * @param aMsgWindow
   * @param aURL
   */
  void CopyMessage(in string aSrcURI, in nsIStreamListener aCopyListener, in boolean aMoveMessage,
               in nsIUrlListener aUrlListener, in nsIMsgWindow aMsgWindow, out nsIURI aURL);

  /**
   * Copy multiple messages at a time 
   *
   * @param keys
   * @param srcFolder
   * @param aCopyListener
   * @param aMoveMessage
   * @param aUrlListener
   * @param aMsgWindow
   * @returns URI that's run to perform the copy
   */
  nsIURI CopyMessages(in unsigned long aNumKeys,
                      [array, size_is (aNumKeys)] in nsMsgKey aKeys,
                      in nsIMsgFolder srcFolder,
                      in nsIStreamListener aCopyListener,
                      in boolean aMoveMessage,
                      in nsIUrlListener aUrlListener,
                      in nsIMsgWindow aMsgWindow);

    
  /**
   * When you want a message displayed....
   *
   * @param aMessageURI Is a uri representing the message to display.
   * @param aDisplayConsumer Is (for now) an nsIDocShell which we'll use to load 
   *                         the message into.
   *                         XXXbz Should it be an nsIWebNavigation or something?
   * @param aMsgWindow
   * @param aUrlListener
   * @param aCharsetOverride (optional) character set over ride to force the message to use.
   * @param aURL
   */
  void DisplayMessage(in string aMessageURI, 
            in nsISupports aDisplayConsumer, 
            in nsIMsgWindow aMsgWindow,
            in nsIUrlListener aUrlListener, 
            in string aCharsetOverride, 
            out nsIURI aURL);

  /**
   * When you want an attachment downloaded
   *
   * @param aContentType We need to know the content type of the attachment
   * @param aFileName The name of the attachment.
   * @param aUrl String representation of the original url associated with the msg.
   * @param aMessageUri RDF resource that describes the message
   * @param aDisplayConsumer
   * @param aMsgWindow Message window
   * @param aUrlListener
   */
  void openAttachment(in string aContentType, 
            in string aFileName, 
            in string aUrl,
            in string aMessageUri, 
            in nsISupports aDisplayConsumer, 
            in nsIMsgWindow aMsgWindow,
            in nsIUrlListener aUrlListener);

  /**
   * When you want to spool a message out to a file on disk. 
   * This is an asynch operation of course. You must pass in a
   * url listener in order to figure out when the operation is done.
   *
   * @param aMessageURI The uri representing the message to spool out to disk.
   * @param aFile The file you want the message saved to
   * @param aGenerateDummyEnvelope Usually FALSE. Set to TRUE if you want the msg
   *        appended at the end of the file.
   * @param aUrlListener
   * @param aURL
   * @param canonicalLineEnding
   * @param aMsgWindow
   */
  void SaveMessageToDisk(in string aMessageURI, in nsIFile aFile,
                         in boolean aGenerateDummyEnvelope, 
                         in nsIUrlListener aUrlListener, out nsIURI aURL,
                         in boolean canonicalLineEnding, in nsIMsgWindow aMsgWindow);

  /**
   * When you have a uri and you would like to convert that
   * to a url which can be run through necko, you can use this method.
   * the Uri MUST refer to a message and not a folder! 
   *
   * @param aMessageURI A message uri to convert.
   * @param aURL URL which can be run through necko.
   * @param aMsgWindow    
   */
  void GetUrlForUri(in string aMessageURI, out nsIURI aURL, in nsIMsgWindow aMsgWindow);

  /**
   * When you want a message displayed in a format that is suitable for printing....
   *
   * @param aMessageURI A uri representing the message to display.
   * @param aDisplayConsumer is (for now) a nsIDocShell which we'll use to load 
   *        the message into. 
   *        XXXbz should it be an nsIWebNavigation?
   * @param aMsgWindow
   * @param aUrlListener
   * @param aURL 
   */
  void DisplayMessageForPrinting(in string aMessageURI, in nsISupports aDisplayConsumer, 
            in nsIMsgWindow aMsgWindow,
            in nsIUrlListener aUrlListener, 
            out nsIURI aURL);

  /**
   *
   *
   * @param aSearchSession
   * @param aMsgWindow
   * @param aMsgFolder
   * @param aSearchUri
   */
  void Search(in nsIMsgSearchSession aSearchSession, in nsIMsgWindow aMsgWindow, in nsIMsgFolder aMsgFolder, in string aSearchUri);

  /** 
   * This methot streams a message to the passed in consumer. If aConvertData is true, it
   * will create a stream converter from message rfc822 to star/star. It will also tack
   * aAdditionalHeader onto the url (e.g., "header=filter").
   *
   * @param aMessageURI  uri of message to stream
   * @param aConsumer    generally, a stream listener listening to the message
   * @param aMsgWindow   msgWindow for give progress and status feedback
   * @param aUrlListener gets notified when url starts and stops
   * @param aConvertData should we create a stream converter?
   * @param aAdditionalHeader added to URI, e.g., "header=filter"
   * @param aLocalOnly whether data should be retrieved only from local caches
   *        If streaming over the network is required and this is true, then
   *        an exception is thrown. This defaults to false.
   *
   * @note If we're offline, then even if aLocalOnly is false, we won't stream over the
   *       network
   *
   * @return the URL that gets run
   */
  nsIURI streamMessage(in string aMessageURI, in nsISupports aConsumer, 
                    in nsIMsgWindow aMsgWindow,
                    in nsIUrlListener aUrlListener, 
                    in boolean aConvertData,
                    in ACString aAdditionalHeader,
                    [optional] in boolean aLocalOnly);

  
  /**
   * Determines whether a message is in the memory cache. Local folders
   * don't implement this.
   *
   * @param aUrl The URL of the message, possibly with an appropriate command in it
   * @param aFolder The folder this message is in
   * @param aCacheEntry If a cache entry is found, then a pointer to it
   * 
   * @return TRUE if the message is in mem cache; FALSE if it is not.
   */
  boolean isMsgInMemCache(in nsIURI aUrl,
                          in nsIMsgFolder aFolder,
                          out nsICacheEntryDescriptor aCacheEntry);

  /**
   * now the the message datasource is going away
   * we need away to go from message uri to go nsIMsgDBHdr
   *
   * @param uri A message uri to get nsIMsgDBHdr for.
   *
   * @return nsIMsgDBHdr for specified uri or null if failed. 
   */
  nsIMsgDBHdr messageURIToMsgHdr(in string uri);
};

/** 
 * Some mail protocols (like imap) allow you to fetch individual mime parts. We use this interface
 * to represent message services whose protocols support this. To use this interface, you should get
 * the message service then QI for this interface. If it's present, then can fetch a mime part.
 */
[scriptable, uuid(3728C255-480C-11d4-98D0-001083010E9B)]
interface nsIMsgMessageFetchPartService : nsISupports 
{
  /**
   * Used to fetch an individual mime part
   *
   * @param aURI url representing the message
   * @param aMessageURI RDF URI including the part to fetch
   * @param aDisplayConsumer
   * @param aMsgWindow
   * @param aUrlListener
   *
   * @return
   */
  nsIURI fetchMimePart(in nsIURI aURI, in string aMessageUri, in nsISupports aDisplayConsumer, 
            in nsIMsgWindow aMsgWindow,
            in nsIUrlListener aUrlListener);  
};
