This is gawk.info, produced by makeinfo version 4.2 from gawk.texi.

INFO-DIR-SECTION GNU Packages
START-INFO-DIR-ENTRY
* Gawk: (gawk).           A text scanning and processing language.
END-INFO-DIR-ENTRY
INFO-DIR-SECTION Individual utilities
START-INFO-DIR-ENTRY
* awk: (gawk)Invoking gawk.           Text scanning and processing.
END-INFO-DIR-ENTRY

   Copyright (C) 1989, 1991, 1992, 1993, 1996, 1997, 1998, 1999, 2000,
2001, 2002 Free Software Foundation, Inc.


   This is Edition 3 of `GAWK: Effective AWK Programming: A User's
Guide for GNU Awk', for the 3.1.1 (or later) version of the GNU
implementation of AWK.

   Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.1 or
any later version published by the Free Software Foundation; with the
Invariant Sections being "GNU General Public License", the Front-Cover
texts being (a) (see below), and with the Back-Cover Texts being (b)
(see below).  A copy of the license is included in the section entitled
"GNU Free Documentation License".

  a. "A GNU Manual"

  b. "You have freedom to copy and modify this GNU Manual, like GNU
     software.  Copies published by the Free Software Foundation raise
     funds for GNU development."


File: gawk.info,  Node: Top,  Next: Foreword,  Prev: (dir),  Up: (dir)

General Introduction
********************

   This file documents `awk', a program that you can use to select
particular records in a file and perform operations upon them.

   This is Edition 3 of `GAWK: Effective AWK Programming: A User's
Guide for GNU Awk', for the 3.1.1 (or later) version of the GNU
implementation of AWK.

* Menu:

* Foreword::                       Some nice words about this
                                   Info file.
* Preface::                        What this Info file is about; brief
                                   history and acknowledgments.
* Getting Started::                A basic introduction to using
                                   `awk'. How to run an `awk'
                                   program. Command-line syntax.
* Regexp::                         All about matching things using regular
                                   expressions.
* Reading Files::                  How to read files and manipulate fields.
* Printing::                       How to print using `awk'. Describes
                                   the `print' and `printf'
                                   statements. Also describes redirection of
                                   output.
* Expressions::                    Expressions are the basic building blocks
                                   of statements.
* Patterns and Actions::           Overviews of patterns and actions.
* Arrays::                         The description and use of arrays. Also
                                   includes array-oriented control statements.
* Functions::                      Built-in and user-defined functions.
* Internationalization::           Getting `gawk' to speak your
                                   language.
* Advanced Features::              Stuff for advanced users, specific to
                                   `gawk'.
* Invoking Gawk::                  How to run `gawk'.
* Library Functions::              A Library of `awk' Functions.
* Sample Programs::                Many `awk' programs with complete
                                   explanations.
* Language History::               The evolution of the `awk'
                                   language.
* Installation::                   Installing `gawk' under various
                                   operating systems.
* Notes::                          Notes about `gawk' extensions and
                                   possible future work.
* Basic Concepts::                 A very quick intoduction to programming
                                   concepts.
* Glossary::                       An explanation of some unfamiliar terms.
* Copying::                        Your right to copy and distribute
                                   `gawk'.
* GNU Free Documentation License:: The license for this Info file.
* Index::                          Concept and Variable Index.

* History::                        The history of `gawk' and
                                   `awk'.
* Names::                          What name to use to find `awk'.
* This Manual::                    Using this Info file. Includes
                                   sample input files that you can use.
* Conventions::                    Typographical Conventions.
* Manual History::                 Brief history of the GNU project and this
                                   Info file.
* How To Contribute::              Helping to save the world.
* Acknowledgments::                Acknowledgments.
* Running gawk::                   How to run `gawk' programs;
                                   includes command-line syntax.
* One-shot::                       Running a short throwaway `awk'
                                   program.
* Read Terminal::                  Using no input files (input from terminal
                                   instead).
* Long::                           Putting permanent `awk' programs in
                                   files.
* Executable Scripts::             Making self-contained `awk'
                                   programs.
* Comments::                       Adding documentation to `gawk'
                                   programs.
* Quoting::                        More discussion of shell quoting issues.
* Sample Data Files::              Sample data files for use in the
                                   `awk' programs illustrated in this
                                   Info file.
* Very Simple::                    A very simple example.
* Two Rules::                      A less simple one-line example using two
                                   rules.
* More Complex::                   A more complex example.
* Statements/Lines::               Subdividing or combining statements into
                                   lines.
* Other Features::                 Other Features of `awk'.
* When::                           When to use `gawk' and when to use
                                   other things.
* Regexp Usage::                   How to Use Regular Expressions.
* Escape Sequences::               How to write nonprinting characters.
* Regexp Operators::               Regular Expression Operators.
* Character Lists::                What can go between `[...]'.
* GNU Regexp Operators::           Operators specific to GNU software.
* Case-sensitivity::               How to do case-insensitive matching.
* Leftmost Longest::               How much text matches.
* Computed Regexps::               Using Dynamic Regexps.
* Records::                        Controlling how data is split into records.
* Fields::                         An introduction to fields.
* Nonconstant Fields::             Nonconstant Field Numbers.
* Changing Fields::                Changing the Contents of a Field.
* Field Separators::               The field separator and how to change it.
* Regexp Field Splitting::         Using regexps as the field separator.
* Single Character Fields::        Making each character a separate field.
* Command Line Field Separator::   Setting `FS' from the command-line.
* Field Splitting Summary::        Some final points and a summary table.
* Constant Size::                  Reading constant width data.
* Multiple Line::                  Reading multi-line records.
* Getline::                        Reading files under explicit program
                                   control using the `getline' function.
* Plain Getline::                  Using `getline' with no arguments.
* Getline/Variable::               Using `getline' into a variable.
* Getline/File::                   Using `getline' from a file.
* Getline/Variable/File::          Using `getline' into a variable from a
                                   file.
* Getline/Pipe::                   Using `getline' from a pipe.
* Getline/Variable/Pipe::          Using `getline' into a variable from a
                                   pipe.
* Getline/Coprocess::              Using `getline' from a coprocess.
* Getline/Variable/Coprocess::     Using `getline' into a variable from a
                                   coprocess.
* Getline Notes::                  Important things to know about
                                   `getline'.
* Getline Summary::                Summary of `getline' Variants.
* Print::                          The `print' statement.
* Print Examples::                 Simple examples of `print' statements.
* Output Separators::              The output separators and how to change
                                   them.
* OFMT::                           Controlling Numeric Output With
                                   `print'.
* Printf::                         The `printf' statement.
* Basic Printf::                   Syntax of the `printf' statement.
* Control Letters::                Format-control letters.
* Format Modifiers::               Format-specification modifiers.
* Printf Examples::                Several examples.
* Redirection::                    How to redirect output to multiple files
                                   and pipes.
* Special Files::                  File name interpretation in `gawk'.
                                   `gawk' allows access to inherited
                                   file descriptors.
* Special FD::                     Special files for I/O.
* Special Process::                Special files for process information.
* Special Network::                Special files for network communications.
* Special Caveats::                Things to watch out for.
* Close Files And Pipes::          Closing Input and Output Files and Pipes.
* Constants::                      String, numeric and regexp constants.
* Scalar Constants::               Numeric and string constants.
* Nondecimal-numbers::             What are octal and hex numbers.
* Regexp Constants::               Regular Expression constants.
* Using Constant Regexps::         When and how to use a regexp constant.
* Variables::                      Variables give names to values for later
                                   use.
* Using Variables::                Using variables in your programs.
* Assignment Options::             Setting variables on the command-line and a
                                   summary of command-line syntax. This is an
                                   advanced method of input.
* Conversion::                     The conversion of strings to numbers and
                                   vice versa.
* Arithmetic Ops::                 Arithmetic operations (`+', `-',
                                   etc.)
* Concatenation::                  Concatenating strings.
* Assignment Ops::                 Changing the value of a variable or a
                                   field.
* Increment Ops::                  Incrementing the numeric value of a
                                   variable.
* Truth Values::                   What is ``true'' and what is ``false''.
* Typing and Comparison::          How variables acquire types and how this
                                   affects comparison of numbers and strings
                                   with `<', etc.
* Boolean Ops::                    Combining comparison expressions using
                                   boolean operators `||' (``or''),
                                   `&&' (``and'') and `!' (``not'').
* Conditional Exp::                Conditional expressions select between two
                                   subexpressions under control of a third
                                   subexpression.
* Function Calls::                 A function call is an expression.
* Precedence::                     How various operators nest.
* Pattern Overview::               What goes into a pattern.
* Regexp Patterns::                Using regexps as patterns.
* Expression Patterns::            Any expression can be used as a pattern.
* Ranges::                         Pairs of patterns specify record ranges.
* BEGIN/END::                      Specifying initialization and cleanup
                                   rules.
* Using BEGIN/END::                How and why to use BEGIN/END rules.
* I/O And BEGIN/END::              I/O issues in BEGIN/END rules.
* Empty::                          The empty pattern, which matches every
                                   record.
* Using Shell Variables::          How to use shell variables with
                                   `awk'.
* Action Overview::                What goes into an action.
* Statements::                     Describes the various control statements in
                                   detail.
* If Statement::                   Conditionally execute some `awk'
                                   statements.
* While Statement::                Loop until some condition is satisfied.
* Do Statement::                   Do specified action while looping until
                                   some condition is satisfied.
* For Statement::                  Another looping statement, that provides
                                   initialization and increment clauses.
* Break Statement::                Immediately exit the innermost enclosing
                                   loop.
* Continue Statement::             Skip to the end of the innermost enclosing
                                   loop.
* Next Statement::                 Stop processing the current input record.
* Nextfile Statement::             Stop processing the current file.
* Exit Statement::                 Stop execution of `awk'.
* Built-in Variables::             Summarizes the built-in variables.
* User-modified::                  Built-in variables that you change to
                                   control `awk'.
* Auto-set::                       Built-in variables where `awk'
                                   gives you information.
* ARGC and ARGV::                  Ways to use `ARGC' and `ARGV'.
* Array Intro::                    Introduction to Arrays
* Reference to Elements::          How to examine one element of an array.
* Assigning Elements::             How to change an element of an array.
* Array Example::                  Basic Example of an Array
* Scanning an Array::              A variation of the `for' statement. It
                                   loops through the indices of an array's
                                   existing elements.
* Delete::                         The `delete' statement removes an
                                   element from an array.
* Numeric Array Subscripts::       How to use numbers as subscripts in
                                   `awk'.
* Uninitialized Subscripts::       Using Uninitialized variables as
                                   subscripts.
* Multi-dimensional::              Emulating multidimensional arrays in
                                   `awk'.
* Multi-scanning::                 Scanning multidimensional arrays.
* Array Sorting::                  Sorting array values and indices.
* Built-in::                       Summarizes the built-in functions.
* Calling Built-in::               How to call built-in functions.
* Numeric Functions::              Functions that work with numbers, including
                                   `int', `sin' and `rand'.
* String Functions::               Functions for string manipulation, such as
                                   `split', `match' and
                                   `sprintf'.
* Gory Details::                   More than you want to know about `\'
                                   and `&' with `sub', `gsub',
                                   and `gensub'.
* I/O Functions::                  Functions for files and shell commands.
* Time Functions::                 Functions for dealing with timestamps.
* Bitwise Functions::              Functions for bitwise operations.
* I18N Functions::                 Functions for string translation.
* User-defined::                   Describes User-defined functions in detail.
* Definition Syntax::              How to write definitions and what they
                                   mean.
* Function Example::               An example function definition and what it
                                   does.
* Function Caveats::               Things to watch out for.
* Return Statement::               Specifying the value a function returns.
* Dynamic Typing::                 How variable types can change at runtime.
* I18N and L10N::                  Internationalization and Localization.
* Explaining gettext::             How GNU `gettext' works.
* Programmer i18n::                Features for the programmer.
* Translator i18n::                Features for the translator.
* String Extraction::              Extracting marked strings.
* Printf Ordering::                Rearranging `printf' arguments.
* I18N Portability::               `awk'-level portability issues.
* I18N Example::                   A simple i18n example.
* Gawk I18N::                      `gawk' is also internationalized.
* Nondecimal Data::                Allowing nondecimal input data.
* Two-way I/O::                    Two-way communications with another
                                   process.
* TCP/IP Networking::              Using `gawk' for network
                                   programming.
* Portal Files::                   Using `gawk' with BSD portals.
* Profiling::                      Profiling your `awk' programs.
* Command Line::                   How to run `awk'.
* Options::                        Command-line options and their meanings.
* Other Arguments::                Input file names and variable assignments.
* AWKPATH Variable::               Searching directories for `awk'
                                   programs.
* Obsolete::                       Obsolete Options and/or features.
* Undocumented::                   Undocumented Options and Features.
* Known Bugs::                     Known Bugs in `gawk'.
* Library Names::                  How to best name private global variables
                                   in library functions.
* General Functions::              Functions that are of general use.
* Nextfile Function::              Two implementations of a `nextfile'
                                   function.
* Assert Function::                A function for assertions in `awk'
                                   programs.
* Round Function::                 A function for rounding if `sprintf'
                                   does not do it correctly.
* Cliff Random Function::          The Cliff Random Number Generator.
* Ordinal Functions::              Functions for using characters as numbers
                                   and vice versa.
* Join Function::                  A function to join an array into a string.
* Gettimeofday Function::          A function to get formatted times.
* Data File Management::           Functions for managing command-line data
                                   files.
* Filetrans Function::             A function for handling data file
                                   transitions.
* Rewind Function::                A function for rereading the current file.
* File Checking::                  Checking that data files are readable.
* Ignoring Assigns::               Treating assignments as file names.
* Getopt Function::                A function for processing command-line
                                   arguments.
* Passwd Functions::               Functions for getting user information.
* Group Functions::                Functions for getting group information.
* Running Examples::               How to run these examples.
* Clones::                         Clones of common utilities.
* Cut Program::                    The `cut' utility.
* Egrep Program::                  The `egrep' utility.
* Id Program::                     The `id' utility.
* Split Program::                  The `split' utility.
* Tee Program::                    The `tee' utility.
* Uniq Program::                   The `uniq' utility.
* Wc Program::                     The `wc' utility.
* Miscellaneous Programs::         Some interesting `awk' programs.
* Dupword Program::                Finding duplicated words in a document.
* Alarm Program::                  An alarm clock.
* Translate Program::              A program similar to the `tr'
                                   utility.
* Labels Program::                 Printing mailing labels.
* Word Sorting::                   A program to produce a word usage count.
* History Sorting::                Eliminating duplicate entries from a
                                   history file.
* Extract Program::                Pulling out programs from Texinfo source
                                   files.
* Simple Sed::                     A Simple Stream Editor.
* Igawk Program::                  A wrapper for `awk' that includes
                                   files.
* V7/SVR3.1::                      The major changes between V7 and System V
                                   Release 3.1.
* SVR4::                           Minor changes between System V Releases 3.1
                                   and 4.
* POSIX::                          New features from the POSIX standard.
* BTL::                            New features from the Bell Laboratories
                                   version of `awk'.
* POSIX/GNU::                      The extensions in `gawk' not in
                                   POSIX `awk'.
* Contributors::                   The major contributors to `gawk'.
* Gawk Distribution::              What is in the `gawk' distribution.
* Getting::                        How to get the distribution.
* Extracting::                     How to extract the distribution.
* Distribution contents::          What is in the distribution.
* Unix Installation::              Installing `gawk' under various
                                   versions of Unix.
* Quick Installation::             Compiling `gawk' under Unix.
* Additional Configuration Options:: Other compile-time options.
* Configuration Philosophy::       How it's all supposed to work.
* Non-Unix Installation::          Installation on Other Operating Systems.
* Amiga Installation::             Installing `gawk' on an Amiga.
* BeOS Installation::              Installing `gawk' on BeOS.
* PC Installation::                Installing and Compiling `gawk' on
                                   MS-DOS and OS/2.
* PC Binary Installation::         Installing a prepared distribution.
* PC Compiling::                   Compiling `gawk' for MS-DOS, Win32,
                                   and OS/2.
* PC Using::                       Running `gawk' on MS-DOS, Win32 and
                                   OS/2.
* Cygwin::                         Building and running `gawk' for
                                   Cygwin.
* VMS Installation::               Installing `gawk' on VMS.
* VMS Compilation::                How to compile `gawk' under VMS.
* VMS Installation Details::       How to install `gawk' under VMS.
* VMS Running::                    How to run `gawk' under VMS.
* VMS POSIX::                      Alternate instructions for VMS POSIX.
* Unsupported::                    Systems whose ports are no longer
                                   supported.
* Atari Installation::             Installing `gawk' on the Atari ST.
* Atari Compiling::                Compiling `gawk' on Atari.
* Atari Using::                    Running `gawk' on Atari.
* Tandem Installation::            Installing `gawk' on a Tandem.
* Bugs::                           Reporting Problems and Bugs.
* Other Versions::                 Other freely available `awk'
                                   implementations.
* Compatibility Mode::             How to disable certain `gawk'
                                   extensions.
* Additions::                      Making Additions To `gawk'.
* Adding Code::                    Adding code to the main body of
                                   `gawk'.
* New Ports::                      Porting `gawk' to a new operating
                                   system.
* Dynamic Extensions::             Adding new built-in functions to
                                   `gawk'.
* Internals::                      A brief look at some `gawk'
                                   internals.
* Sample Library::                 A example of new functions.
* Internal File Description::      What the new functions will do.
* Internal File Ops::              The code for internal file operations.
* Using Internal File Ops::        How to use an external extension.
* Future Extensions::              New features that may be implemented one
                                   day.
* Basic High Level::               The high level view.
* Basic Data Typing::              A very quick intro to data types.
* Floating Point Issues::          Stuff to know about floating-point numbers.

                  To Miriam, for making me complete.

                  To Chana, for the joy you bring us.

                To Rivka, for the exponential increase.

                  To Nachum, for the added dimension.

                   To Malka, for the new beginning.


File: gawk.info,  Node: Foreword,  Next: Preface,  Prev: Top,  Up: Top

Foreword
********

   Arnold Robbins and I are good friends. We were introduced 11 years
ago by circumstances--and our favorite programming language, AWK.  The
circumstances started a couple of years earlier. I was working at a new
job and noticed an unplugged Unix computer sitting in the corner.  No
one knew how to use it, and neither did I.  However, a couple of days
later it was running, and I was `root' and the one-and-only user.  That
day, I began the transition from statistician to Unix programmer.

   On one of many trips to the library or bookstore in search of books
on Unix, I found the gray AWK book, a.k.a. Aho, Kernighan and
Weinberger, `The AWK Programming Language', Addison-Wesley, 1988.
AWK's simple programming paradigm--find a pattern in the input and then
perform an action--often reduced complex or tedious data manipulations
to few lines of code.  I was excited to try my hand at programming in
AWK.

   Alas,  the `awk' on my computer was a limited version of the
language described in the AWK book.  I discovered that my computer had
"old `awk'" and the AWK book described "new `awk'."  I learned that
this was typical; the old version refused to step aside or relinquish
its name.  If a system had a new `awk', it was invariably called
`nawk', and few systems had it.  The best way to get a new `awk' was to
`ftp' the source code for `gawk' from `prep.ai.mit.edu'.  `gawk' was a
version of new `awk' written by David Trueman and Arnold, and available
under the GNU General Public License.

   (Incidentally, it's no longer difficult to find a new `awk'. `gawk'
ships with Linux, and you can download binaries or source code for
almost any system; my wife uses `gawk' on her VMS box.)

   My Unix system started out unplugged from the wall; it certainly was
not plugged into a network.  So, oblivious to the existence of `gawk'
and the Unix community in general, and desiring a new `awk', I wrote my
own, called `mawk'.  Before I was finished I knew about `gawk', but it
was too late to stop, so I eventually posted to a `comp.sources'
newsgroup.

   A few days after my posting, I got a friendly email from Arnold
introducing himself.   He suggested we share design and algorithms and
attached a draft of the POSIX standard so that I could update `mawk' to
support language extensions added after publication of the AWK book.

   Frankly, if our roles had been reversed, I would not have been so
open and we probably would have never met.  I'm glad we did meet.  He
is an AWK expert's AWK expert and a genuinely nice person.  Arnold
contributes significant amounts of his expertise and time to the Free
Software Foundation.

   This book is the `gawk' reference manual, but at its core it is a
book about AWK programming that will appeal to a wide audience.  It is
a definitive reference to the AWK language as defined by the 1987 Bell
Labs release and codified in the 1992 POSIX Utilities standard.

   On the other hand, the novice AWK programmer can study a wealth of
practical programs that emphasize the power of AWK's basic idioms: data
driven control-flow, pattern matching with regular expressions, and
associative arrays.  Those looking for something new can try out
`gawk''s interface to network protocols via special `/inet' files.

   The programs in this book make clear that an AWK program is
typically much smaller and faster to develop than a counterpart written
in C.  Consequently, there is often a payoff to prototype an algorithm
or design in AWK to get it running quickly and expose problems early.
Often, the interpreted performance is adequate and the AWK prototype
becomes the product.

   The new `pgawk' (profiling `gawk'), produces program execution
counts.  I recently experimented with an algorithm that for n lines of
input, exhibited ~ C n^2 performance, while theory predicted ~ C n log n
behavior. A few minutes poring over the `awkprof.out' profile
pinpointed the problem to a single line of code.  `pgawk' is a welcome
addition to my programmer's toolbox.

   Arnold has distilled over a decade of experience writing and using
AWK programs, and developing `gawk', into this book.  If you use AWK or
want to learn how, then read this book.

     Michael Brennan
     Author of `mawk'


File: gawk.info,  Node: Preface,  Next: Getting Started,  Prev: Foreword,  Up: Top

Preface
*******

   Several kinds of tasks occur repeatedly when working with text files.
You might want to extract certain lines and discard the rest.  Or you
may need to make changes wherever certain patterns appear, but leave
the rest of the file alone.  Writing single-use programs for these
tasks in languages such as C, C++, or Pascal is time-consuming and
inconvenient.  Such jobs are often easier with `awk'.  The `awk'
utility interprets a special-purpose programming language that makes it
easy to handle simple data-reformatting jobs.

   The GNU implementation of `awk' is called `gawk'; it is fully
compatible with the System V Release 4 version of `awk'.  `gawk' is
also compatible with the POSIX specification of the `awk' language.
This means that all properly written `awk' programs should work with
`gawk'.  Thus, we usually don't distinguish between `gawk' and other
`awk' implementations.

   Using `awk' allows you to:

   * Manage small, personal databases

   * Generate reports

   * Validate data

   * Produce indexes and perform other document preparation tasks

   * Experiment with algorithms that you can adapt later to other
     computer languages

   In addition, `gawk' provides facilities that make it easy to:

   * Extract bits and pieces of data for processing

   * Sort data

   * Perform simple network communications

   This Info file teaches you about the `awk' language and how you can
use it effectively.  You should already be familiar with basic system
commands, such as `cat' and `ls',(1) as well as basic shell facilities,
such as input/output (I/O) redirection and pipes.

   Implementations of the `awk' language are available for many
different computing environments.  This Info file, while describing the
`awk' language in general, also describes the particular implementation
of `awk' called `gawk' (which stands for "GNU awk").  `gawk' runs on a
broad range of Unix systems, ranging from 80386 PC-based computers up
through large-scale systems, such as Crays. `gawk' has also been ported
to Mac OS X, MS-DOS, Microsoft Windows (all versions) and OS/2 PCs,
Atari and Amiga microcomputers, BeOS, Tandem D20, and VMS.

* Menu:

* History::                     The history of `gawk' and
                                `awk'.
* Names::                       What name to use to find `awk'.
* This Manual::                 Using this Info file. Includes sample
                                input files that you can use.
* Conventions::                 Typographical Conventions.
* Manual History::              Brief history of the GNU project and this
                                Info file.
* How To Contribute::           Helping to save the world.
* Acknowledgments::             Acknowledgments.

   ---------- Footnotes ----------

   (1) These commands are available on POSIX-compliant systems, as well
as on traditional Unix-based systems. If you are using some other
operating system, you still need to be familiar with the ideas of I/O
redirection and pipes.


File: gawk.info,  Node: History,  Next: Names,  Prev: Preface,  Up: Preface

History of `awk' and `gawk'
===========================

                   Recipe For A Programming Language
          1 part  `egrep'   1 part  `snobol'
          2 parts `ed'      3 parts C

     Blend all parts well using `lex' and `yacc'.  Document minimally
     and release.

     After eight years, add another part `egrep' and two more parts C.
     Document very well and release.

   The name `awk' comes from the initials of its designers: Alfred V.
Aho, Peter J. Weinberger and Brian W. Kernighan.  The original version
of `awk' was written in 1977 at AT&T Bell Laboratories.  In 1985, a new
version made the programming language more powerful, introducing
user-defined functions, multiple input streams, and computed regular
expressions.  This new version became widely available with Unix System
V Release 3.1 (SVR3.1).  The version in SVR4 added some new features
and cleaned up the behavior in some of the "dark corners" of the
language.  The specification for `awk' in the POSIX Command Language
and Utilities standard further clarified the language.  Both the `gawk'
designers and the original Bell Laboratories `awk' designers provided
feedback for the POSIX specification.

   Paul Rubin wrote the GNU implementation, `gawk', in 1986.  Jay
Fenlason completed it, with advice from Richard Stallman.  John Woods
contributed parts of the code as well.  In 1988 and 1989, David
Trueman, with help from me, thoroughly reworked `gawk' for compatibility
with the newer `awk'.  Circa 1995, I became the primary maintainer.
Current development focuses on bug fixes, performance improvements,
standards compliance, and occasionally, new features.

   In May of 1997, Ju"rgen Kahrs felt the need for network access from
`awk', and with a little help from me, set about adding features to do
this for `gawk'.  At that time, he also wrote the bulk of `TCP/IP
Internetworking with `gawk'' (a separate document, available as part of
the `gawk' distribution).  His code finally became part of the main
`gawk' distribution with `gawk' version 3.1.

   *Note Major Contributors to `gawk': Contributors, for a complete
list of those who made important contributions to `gawk'.


File: gawk.info,  Node: Names,  Next: This Manual,  Prev: History,  Up: Preface

A Rose by Any Other Name
========================

   The `awk' language has evolved over the years. Full details are
provided in *Note The Evolution of the `awk' Language: Language History.
The language described in this Info file is often referred to as "new
`awk'" (`nawk').

   Because of this, many systems have multiple versions of `awk'.  Some
systems have an `awk' utility that implements the original version of
the `awk' language and a `nawk' utility for the new version.  Others
have an `oawk' version for the "old `awk'" language and plain `awk' for
the new one.  Still others only have one version, which is usually the
new one.(1)

   All in all, this makes it difficult for you to know which version of
`awk' you should run when writing your programs.  The best advice I can
give here is to check your local documentation. Look for `awk', `oawk',
and `nawk', as well as for `gawk'.  It is likely that you already have
some version of new `awk' on your system, which is what you should use
when running your programs.  (Of course, if you're reading this Info
file, chances are good that you have `gawk'!)

   Throughout this Info file, whenever we refer to a language feature
that should be available in any complete implementation of POSIX `awk',
we simply use the term `awk'.  When referring to a feature that is
specific to the GNU implementation, we use the term `gawk'.

   ---------- Footnotes ----------

   (1) Often, these systems use `gawk' for their `awk' implementation!


File: gawk.info,  Node: This Manual,  Next: Conventions,  Prev: Names,  Up: Preface

Using This Book
===============

   The term `awk' refers to a particular program as well as to the
language you use to tell this program what to do.  When we need to be
careful, we call the language "the `awk' language," and the program
"the `awk' utility."  This Info file explains both the `awk' language
and how to run the `awk' utility.  The term "`awk' program" refers to a
program written by you in the `awk' programming language.

   Primarily, this Info file explains the features of `awk', as defined
in the POSIX standard.  It does so in the context of the `gawk'
implementation.  While doing so, it also attempts to describe important
differences between `gawk' and other `awk' implementations.(1) Finally,
any `gawk' features that are not in the POSIX standard for `awk' are
noted.

   There are subsections labelled as *Advanced Notes* scattered
throughout the Info file.  They add a more complete explanation of
points that are relevant, but not likely to be of interest on first
reading.  All appear in the index, under the heading "advanced
features."

   Most of the time, the examples use complete `awk' programs.  In some
of the more advanced sections, only the part of the `awk' program that
illustrates the concept currently being described is shown.

   While this Info file is aimed principally at people who have not been
exposed to `awk', there is a lot of information here that even the `awk'
expert should find useful.  In particular, the description of POSIX
`awk' and the example programs in *Note A Library of `awk' Functions:
Library Functions, and in *Note Practical `awk' Programs: Sample
Programs, should be of interest.

   *Note Getting Started with `awk': Getting Started, provides the
essentials you need to know to begin using `awk'.

   *Note Regular Expressions: Regexp, introduces regular expressions in
general, and in particular the flavors supported by POSIX `awk' and
`gawk'.

   *Note Reading Input Files: Reading Files, describes how `awk' reads
your data.  It introduces the concepts of records and fields, as well
as the `getline' command.  I/O redirection is first described here.

   *Note Printing Output: Printing, describes how `awk' programs can
produce output with `print' and `printf'.

   *Note Expressions::, describes expressions, which are the basic
building blocks for getting most things done in a program.

   *Note Patterns Actions and Variables: Patterns and Actions,
describes how to write patterns for matching records, actions for doing
something when a record is matched, and the built-in variables `awk'
and `gawk' use.

   *Note Arrays in `awk': Arrays, covers `awk''s one-and-only data
structure: associative arrays.  Deleting array elements and whole
arrays is also described, as well as sorting arrays in `gawk'.

   *Note Functions::, describes the built-in functions `awk' and `gawk'
provide, as well as how to define your own functions.

   *Note Internationalization with `gawk': Internationalization,
describes special features in `gawk' for translating program messages
into different languages at runtime.

   *Note Advanced Features of `gawk': Advanced Features, describes a
number of `gawk'-specific advanced features.  Of particular note are
the abilities to have two-way communications with another process,
perform TCP/IP networking, and profile your `awk' programs.

   *Note Running `awk' and `gawk': Invoking Gawk, describes how to run
`gawk', the meaning of its command-line options, and how it finds `awk'
program source files.

   *Note A Library of `awk' Functions: Library Functions, and *Note
Practical `awk' Programs: Sample Programs, provide many sample `awk'
programs.  Reading them allows you to see `awk' solving real problems.

   *Note The Evolution of the `awk' Language: Language History,
describes how the `awk' language has evolved since first release to
present.  It also describes how `gawk' has acquired features over time.

   *Note Installing `gawk': Installation, describes how to get `gawk',
how to compile it under Unix, and how to compile and use it on different
non-Unix systems.  It also describes how to report bugs in `gawk' and
where to get three other freely available implementations of `awk'.

   *Note Implementation Notes: Notes, describes how to disable `gawk''s
extensions, as well as how to contribute new code to `gawk', how to
write extension libraries, and some possible future directions for
`gawk' development.

   *Note Basic Programming Concepts: Basic Concepts, provides some very
cursory background material for those who are completely unfamiliar
with computer programming.  Also centralized there is a discussion of
some of the issues surrounding floating-point numbers.

   The *Note Glossary::, defines most, if not all, the significant
terms used throughout the book.  If you find terms that you aren't
familiar with, try looking them up here.

   *Note GNU General Public License: Copying, and *Note GNU Free
Documentation License::, present the licenses that cover the `gawk'
source code and this Info file, respectively.

   ---------- Footnotes ----------

   (1) All such differences appear in the index under the entry
"differences in `awk' and `gawk'."


File: gawk.info,  Node: Conventions,  Next: Manual History,  Prev: This Manual,  Up: Preface

Typographical Conventions
=========================

   This Info file is written using Texinfo, the GNU documentation
formatting language.  A single Texinfo source file is used to produce
both the printed and online versions of the documentation.  This minor
node briefly documents the typographical conventions used in Texinfo.

   Examples you would type at the command-line are preceded by the
common shell primary and secondary prompts, `$' and `>'.  Output from
the command is preceded by the glyph "-|".  This typically represents
the command's standard output.  Error messages, and other output on the
command's standard error, are preceded by the glyph "error-->".  For
example:

     $ echo hi on stdout
     -| hi on stdout
     $ echo hello on stderr 1>&2
     error--> hello on stderr

   Characters that you type at the keyboard look `like this'.  In
particular, there are special characters called "control characters."
These are characters that you type by holding down both the `CONTROL'
key and another key, at the same time.  For example, a `Ctrl-d' is typed
by first pressing and holding the `CONTROL' key, next pressing the `d'
key and finally releasing both keys.

Dark Corners
............

     Dark corners are basically fractal -- no matter how much you
     illuminate, there's always a smaller but darker one.
     Brian Kernighan

   Until the POSIX standard (and `The Gawk Manual'), many features of
`awk' were either poorly documented or not documented at all.
Descriptions of such features (often called "dark corners") are noted
in this Info file with "(d.c.)".  They also appear in the index under
the heading "dark corner."

   As noted by the opening quote, though, any coverage of dark corners
is, by definition, something that is incomplete.


File: gawk.info,  Node: Manual History,  Next: How To Contribute,  Prev: Conventions,  Up: Preface

The GNU Project and This Book
=============================

   The Free Software Foundation (FSF) is a nonprofit organization
dedicated to the production and distribution of freely distributable
software.  It was founded by Richard M. Stallman, the author of the
original Emacs editor.  GNU Emacs is the most widely used version of
Emacs today.

   The GNU(1) Project is an ongoing effort on the part of the Free
Software Foundation to create a complete, freely distributable,
POSIX-compliant computing environment.  The FSF uses the "GNU General
Public License" (GPL) to ensure that their software's source code is
always available to the end user. A copy of the GPL is included for
your reference (*note GNU General Public License: Copying.).  The GPL
applies to the C language source code for `gawk'.  To find out more
about the FSF and the GNU Project online, see the GNU Project's home
page (http://www.gnu.org).  This Info file may also be read from their
web site (http://www.gnu.org/manual/gawk/).

   A shell, an editor (Emacs), highly portable optimizing C, C++, and
Objective-C compilers, a symbolic debugger and dozens of large and
small utilities (such as `gawk'), have all been completed and are
freely available.  The GNU operating system kernel (the HURD), has been
released but is still in an early stage of development.

   Until the GNU operating system is more fully developed, you should
consider using GNU/Linux, a freely distributable, Unix-like operating
system for Intel 80386, DEC Alpha, Sun SPARC, IBM S/390, and other
systems.(2) There are many books on GNU/Linux. One that is freely
available is `Linux Installation and Getting Started', by Matt Welsh.
Many GNU/Linux distributions are often available in computer stores or
bundled on CD-ROMs with books about Linux.  (There are three other
freely available, Unix-like operating systems for 80386 and other
systems: NetBSD, FreeBSD, and OpenBSD. All are based on the 4.4-Lite
Berkeley Software Distribution, and they use recent versions of `gawk'
for their versions of `awk'.)

   The Info file itself has gone through a number of previous editions.
Paul Rubin wrote the very first draft of `The GAWK Manual'; it was
around 40 pages in size.  Diane Close and Richard Stallman improved it,
yielding a version that was around 90 pages long and barely described
the original, "old" version of `awk'.

   I started working with that version in the fall of 1988.  As work on
it progressed, the FSF published several preliminary versions (numbered
0.X).  In 1996, Edition 1.0 was released with `gawk' 3.0.0.  The FSF
published the first two editions under the title `The GNU Awk User's
Guide'.

   This edition maintains the basic structure of Edition 1.0, but with
significant additional material, reflecting the host of new features in
`gawk' version 3.1.  Of particular note is *Note Sorting Array Values
and Indices with `gawk': Array Sorting, as well as *Note Using `gawk''s
Bit Manipulation Functions: Bitwise Functions, *Note
Internationalization with `gawk': Internationalization, and also *Note
Advanced Features of `gawk': Advanced Features, and *Note Adding New
Built-in Functions to `gawk': Dynamic Extensions.

   `GAWK: Effective AWK Programming' will undoubtedly continue to
evolve.  An electronic version comes with the `gawk' distribution from
the FSF.  If you find an error in this Info file, please report it!
*Note Reporting Problems and Bugs: Bugs, for information on submitting
problem reports electronically, or write to me in care of the publisher.

   ---------- Footnotes ----------

   (1) GNU stands for "GNU's not Unix."

   (2) The terminology "GNU/Linux" is explained in the *Note Glossary::.


File: gawk.info,  Node: How To Contribute,  Next: Acknowledgments,  Prev: Manual History,  Up: Preface

How to Contribute
=================

   As the maintainer of GNU `awk', I am starting a collection of
publicly available `awk' programs.  For more information, see
`ftp://ftp.freefriends.org/arnold/Awkstuff'.  If you have written an
interesting `awk' program, or have written a `gawk' extension that you
would like to share with the rest of the world, please contact me
(<arnold@gnu.org>).  Making things available on the Internet helps keep
the `gawk' distribution down to manageable size.


File: gawk.info,  Node: Acknowledgments,  Prev: How To Contribute,  Up: Preface

Acknowledgments
===============

   The initial draft of `The GAWK Manual' had the following
acknowledgments:

     Many people need to be thanked for their assistance in producing
     this manual.  Jay Fenlason contributed many ideas and sample
     programs.  Richard Mlynarik and Robert Chassell gave helpful
     comments on drafts of this manual.  The paper `A Supplemental
     Document for `awk'' by John W.  Pierce of the Chemistry Department
     at UC San Diego, pinpointed several issues relevant both to `awk'
     implementation and to this manual, that would otherwise have
     escaped us.

   I would like to acknowledge Richard M. Stallman, for his vision of a
better world and for his courage in founding the FSF and starting the
GNU Project.

   The following people (in alphabetical order) provided helpful
comments on various versions of this book, up to and including this
edition.  Rick Adams, Nelson H.F. Beebe, Karl Berry, Dr. Michael
Brennan, Rich Burridge, Claire Cloutier, Diane Close, Scott Deifik,
Christopher ("Topher") Eliot, Jeffrey Friedl, Dr. Darrel Hankerson,
Michal Jaegermann, Dr. Richard J. LeBlanc, Michael Lijewski, Pat Rankin,
Miriam Robbins, Mary Sheehan, and Chuck Toporek.

   Robert J. Chassell provided much valuable advice on the use of
Texinfo.  He also deserves special thanks for convincing me _not_ to
title this Info file `How To Gawk Politely'.  Karl Berry helped
significantly with the TeX part of Texinfo.

   I would like to thank Marshall and Elaine Hartholz of Seattle and
Dr. Bert and Rita Schreiber of Detroit for large amounts of quiet
vacation time in their homes, which allowed me to make significant
progress on this Info file and on `gawk' itself.

   Phil Hughes of SSC contributed in a very important way by loaning me
his laptop GNU/Linux system, not once, but twice, which allowed me to
do a lot of work while away from home.

   David Trueman deserves special credit; he has done a yeoman job of
evolving `gawk' so that it performs well and without bugs.  Although he
is no longer involved with `gawk', working with him on this project was
a significant pleasure.

   The intrepid members of the GNITS mailing list, and most notably
Ulrich Drepper, provided invaluable help and feedback for the design of
the internationalization features.

   Nelson Beebe, Martin Brown, Andreas Buening, Scott Deifik, Darrel
Hankerson, Isamu Hasegawa, Michal Jaegermann, Ju"rgen Kahrs, Pat Rankin,
Kai Uwe Rommel, and Eli Zaretskii (in alphabetical order) make up the
`gawk' "crack portability team."  Without their hard work and help,
`gawk' would not be nearly the fine program it is today.  It has been
and continues to be a pleasure working with this team of fine people.

   David and I would like to thank Brian Kernighan of Bell Laboratories
for invaluable assistance during the testing and debugging of `gawk',
and for help in clarifying numerous points about the language.  We
could not have done nearly as good a job on either `gawk' or its
documentation without his help.

   Chuck Toporek, Mary Sheehan, and Claire Coutier of O'Reilly &
Associates contributed significant editorial help for this Info file
for the 3.1 release of `gawk'.

   I must thank my wonderful wife, Miriam, for her patience through the
many versions of this project, for her proofreading, and for sharing me
with the computer.  I would like to thank my parents for their love,
and for the grace with which they raised and educated me.  Finally, I
also must acknowledge my gratitude to G-d, for the many opportunities
He has sent my way, as well as for the gifts He has given me with which
to take advantage of those opportunities.


Arnold Robbins
Nof Ayalon
ISRAEL
March, 2001


File: gawk.info,  Node: Getting Started,  Next: Regexp,  Prev: Preface,  Up: Top

Getting Started with `awk'
**************************

   The basic function of `awk' is to search files for lines (or other
units of text) that contain certain patterns.  When a line matches one
of the patterns, `awk' performs specified actions on that line.  `awk'
keeps processing input lines in this way until it reaches the end of
the input files.

   Programs in `awk' are different from programs in most other
languages, because `awk' programs are "data-driven"; that is, you
describe the data you want to work with and then what to do when you
find it.  Most other languages are "procedural"; you have to describe,
in great detail, every step the program is to take.  When working with
procedural languages, it is usually much harder to clearly describe the
data your program will process.  For this reason, `awk' programs are
often refreshingly easy to read and write.

   When you run `awk', you specify an `awk' "program" that tells `awk'
what to do.  The program consists of a series of "rules".  (It may also
contain "function definitions", an advanced feature that we will ignore
for now.  *Note User-Defined Functions: User-defined.)  Each rule
specifies one pattern to search for and one action to perform upon
finding the pattern.

   Syntactically, a rule consists of a pattern followed by an action.
The action is enclosed in curly braces to separate it from the pattern.
Newlines usually separate rules.  Therefore, an `awk' program looks
like this:

     PATTERN { ACTION }
     PATTERN { ACTION }
     ...

* Menu:

* Running gawk::                How to run `gawk' programs; includes
                                command-line syntax.
* Sample Data Files::           Sample data files for use in the `awk'
                                programs illustrated in this Info file.
* Very Simple::                 A very simple example.
* Two Rules::                   A less simple one-line example using two
                                rules.
* More Complex::                A more complex example.
* Statements/Lines::            Subdividing or combining statements into
                                lines.
* Other Features::              Other Features of `awk'.
* When::                        When to use `gawk' and when to use
                                other things.


File: gawk.info,  Node: Running gawk,  Next: Sample Data Files,  Prev: Getting Started,  Up: Getting Started

How to Run `awk' Programs
=========================

   There are several ways to run an `awk' program.  If the program is
short, it is easiest to include it in the command that runs `awk', like
this:

     awk 'PROGRAM' INPUT-FILE1 INPUT-FILE2 ...

   When the program is long, it is usually more convenient to put it in
a file and run it with a command like this:

     awk -f PROGRAM-FILE INPUT-FILE1 INPUT-FILE2 ...

   This minor node discusses both mechanisms, along with several
variations of each.

* Menu:

* One-shot::                    Running a short throwaway `awk'
                                program.
* Read Terminal::               Using no input files (input from terminal
                                instead).
* Long::                        Putting permanent `awk' programs in
                                files.
* Executable Scripts::          Making self-contained `awk' programs.
* Comments::                    Adding documentation to `gawk'
                                programs.
* Quoting::                     More discussion of shell quoting issues.


File: gawk.info,  Node: One-shot,  Next: Read Terminal,  Prev: Running gawk,  Up: Running gawk

One-Shot Throwaway `awk' Programs
---------------------------------

   Once you are familiar with `awk', you will often type in simple
programs the moment you want to use them.  Then you can write the
program as the first argument of the `awk' command, like this:

     awk 'PROGRAM' INPUT-FILE1 INPUT-FILE2 ...

where PROGRAM consists of a series of PATTERNS and ACTIONS, as
described earlier.

   This command format instructs the "shell", or command interpreter,
to start `awk' and use the PROGRAM to process records in the input
file(s).  There are single quotes around PROGRAM so the shell won't
interpret any `awk' characters as special shell characters.  The quotes
also cause the shell to treat all of PROGRAM as a single argument for
`awk', and allow PROGRAM to be more than one line long.

   This format is also useful for running short or medium-sized `awk'
programs from shell scripts, because it avoids the need for a separate
file for the `awk' program.  A self-contained shell script is more
reliable because there are no other files to misplace.

   *Note Some Simple Examples: Very Simple, presents several short,
self-contained programs.


File: gawk.info,  Node: Read Terminal,  Next: Long,  Prev: One-shot,  Up: Running gawk

Running `awk' Without Input Files
---------------------------------

   You can also run `awk' without any input files.  If you type the
following command line:

     awk 'PROGRAM'

`awk' applies the PROGRAM to the "standard input", which usually means
whatever you type on the terminal.  This continues until you indicate
end-of-file by typing `Ctrl-d'.  (On other operating systems, the
end-of-file character may be different.  For example, on OS/2 and
MS-DOS, it is `Ctrl-z'.)

   As an example, the following program prints a friendly piece of
advice (from Douglas Adams's `The Hitchhiker's Guide to the Galaxy'),
to keep you from worrying about the complexities of computer programming
(`BEGIN' is a feature we haven't discussed yet):

     $ awk "BEGIN { print \"Don't Panic!\" }"
     -| Don't Panic!

   This program does not read any input.  The `\' before each of the
inner double quotes is necessary because of the shell's quoting
rules--in particular because it mixes both single quotes and double
quotes.(1)

   This next simple `awk' program emulates the `cat' utility; it copies
whatever you type on the keyboard to its standard output (why this
works is explained shortly).

     $ awk '{ print }'
     Now is the time for all good men
     -| Now is the time for all good men
     to come to the aid of their country.
     -| to come to the aid of their country.
     Four score and seven years ago, ...
     -| Four score and seven years ago, ...
     What, me worry?
     -| What, me worry?
     Ctrl-d

   ---------- Footnotes ----------

   (1) Although we generally recommend the use of single quotes around
the program text, double quotes are needed here in order to put the
single quote into the message.


File: gawk.info,  Node: Long,  Next: Executable Scripts,  Prev: Read Terminal,  Up: Running gawk

Running Long Programs
---------------------

   Sometimes your `awk' programs can be very long.  In this case, it is
more convenient to put the program into a separate file.  In order to
tell `awk' to use that file for its program, you type:

     awk -f SOURCE-FILE INPUT-FILE1 INPUT-FILE2 ...

   The `-f' instructs the `awk' utility to get the `awk' program from
the file SOURCE-FILE.  Any file name can be used for SOURCE-FILE.  For
example, you could put the program:

     BEGIN { print "Don't Panic!" }

into the file `advice'.  Then this command:

     awk -f advice

does the same thing as this one:

     awk "BEGIN { print \"Don't Panic!\" }"

This was explained earlier (*note Running `awk' Without Input Files:
Read Terminal.).  Note that you don't usually need single quotes around
the file name that you specify with `-f', because most file names don't
contain any of the shell's special characters.  Notice that in
`advice', the `awk' program did not have single quotes around it.  The
quotes are only needed for programs that are provided on the `awk'
command line.

   If you want to identify your `awk' program files clearly as such,
you can add the extension `.awk' to the file name.  This doesn't affect
the execution of the `awk' program but it does make "housekeeping"
easier.


File: gawk.info,  Node: Executable Scripts,  Next: Comments,  Prev: Long,  Up: Running gawk

Executable `awk' Programs
-------------------------

   Once you have learned `awk', you may want to write self-contained
`awk' scripts, using the `#!' script mechanism.  You can do this on
many Unix systems(1) as well as on the GNU system.  For example, you
could update the file `advice' to look like this:

     #! /bin/awk -f
     
     BEGIN { print "Don't Panic!" }

After making this file executable (with the `chmod' utility), simply
type `advice' at the shell and the system arranges to run `awk'(2) as
if you had typed `awk -f advice':

     $ chmod +x advice
     $ advice
     -| Don't Panic!

Self-contained `awk' scripts are useful when you want to write a
program that users can invoke without their having to know that the
program is written in `awk'.

Advanced Notes: Portability Issues with `#!'
--------------------------------------------

   Some systems limit the length of the interpreter name to 32
characters.  Often, this can be dealt with by using a symbolic link.

   You should not put more than one argument on the `#!' line after the
path to `awk'. It does not work. The operating system treats the rest
of the line as a single argument and passes it to `awk'.  Doing this
leads to confusing behavior--most likely a usage diagnostic of some
sort from `awk'.

   Finally, the value of `ARGV[0]' (*note Built-in Variables::) varies
depending upon your operating system.  Some systems put `awk' there,
some put the full pathname of `awk' (such as `/bin/awk'), and some put
the name of your script (`advice').  Don't rely on the value of
`ARGV[0]' to provide your script name.

   ---------- Footnotes ----------

   (1) The `#!' mechanism works on Linux systems, systems derived from
the 4.4-Lite Berkeley Software Distribution, and most commercial Unix
systems.

   (2) The line beginning with `#!' lists the full file name of an
interpreter to run and an optional initial command-line argument to
pass to that interpreter.  The operating system then runs the
interpreter with the given argument and the full argument list of the
executed program.  The first argument in the list is the full file name
of the `awk' program.  The rest of the argument list contains either
options to `awk', or data files, or both.


File: gawk.info,  Node: Comments,  Next: Quoting,  Prev: Executable Scripts,  Up: Running gawk

Comments in `awk' Programs
--------------------------

   A "comment" is some text that is included in a program for the sake
of human readers; it is not really an executable part of the program.
Comments can explain what the program does and how it works.  Nearly all
programming languages have provisions for comments, as programs are
typically hard to understand without them.

   In the `awk' language, a comment starts with the sharp sign
character (`#') and continues to the end of the line.  The `#' does not
have to be the first character on the line. The `awk' language ignores
the rest of a line following a sharp sign.  For example, we could have
put the following into `advice':

     # This program prints a nice friendly message.  It helps
     # keep novice users from being afraid of the computer.
     BEGIN    { print "Don't Panic!" }

   You can put comment lines into keyboard-composed throwaway `awk'
programs, but this usually isn't very useful; the purpose of a comment
is to help you or another person understand the program when reading it
at a later time.

   *Caution:* As mentioned in *Note One-Shot Throwaway `awk' Programs:
One-shot, you can enclose small to medium programs in single quotes, in
order to keep your shell scripts self-contained.  When doing so,
_don't_ put an apostrophe (i.e., a single quote) into a comment (or
anywhere else in your program). The shell interprets the quote as the
closing quote for the entire program. As a result, usually the shell
prints a message about mismatched quotes, and if `awk' actually runs,
it will probably print strange messages about syntax errors.  For
example, look at the following:

     $ awk '{ print "hello" } # let's be cute'
     >

   The shell sees that the first two quotes match, and that a new
quoted object begins at the end of the command line.  It therefore
prompts with the secondary prompt, waiting for more input.  With Unix
`awk', closing the quoted string produces this result:

     $ awk '{ print "hello" } # let's be cute'
     > '
     error--> awk: can't open file be
     error-->  source line number 1

   Putting a backslash before the single quote in `let's' wouldn't help,
since backslashes are not special inside single quotes.  The next
node describes the shell's quoting rules.


File: gawk.info,  Node: Quoting,  Prev: Comments,  Up: Running gawk

Shell-Quoting Issues
--------------------

   For short to medium length `awk' programs, it is most convenient to
enter the program on the `awk' command line.  This is best done by
enclosing the entire program in single quotes.  This is true whether
you are entering the program interactively at the shell prompt, or
writing it as part of a larger shell script:

     awk 'PROGRAM TEXT' INPUT-FILE1 INPUT-FILE2 ...

   Once you are working with the shell, it is helpful to have a basic
knowledge of shell quoting rules.  The following rules apply only to
POSIX-compliant, Bourne-style shells (such as `bash', the GNU
Bourne-Again Shell).  If you use `csh', you're on your own.

   * Quoted items can be concatenated with nonquoted items as well as
     with other quoted items.  The shell turns everything into one
     argument for the command.

   * Preceding any single character with a backslash (`\') quotes that
     character.  The shell removes the backslash and passes the quoted
     character on to the command.

   * Single quotes protect everything between the opening and closing
     quotes.  The shell does no interpretation of the quoted text,
     passing it on verbatim to the command.  It is _impossible_ to
     embed a single quote inside single-quoted text.  Refer back to
     *Note Comments in `awk' Programs: Comments, for an example of what
     happens if you try.

   * Double quotes protect most things between the opening and closing
     quotes.  The shell does at least variable and command substitution
     on the quoted text.  Different shells may do additional kinds of
     processing on double-quoted text.

     Since certain characters within double-quoted text are processed
     by the shell, they must be "escaped" within the text.  Of note are
     the characters `$', ``', `\', and `"', all of which must be
     preceded by a backslash within double-quoted text if they are to
     be passed on literally to the program.  (The leading backslash is
     stripped first.)  Thus, the example seen in *Note Running `awk'
     Without Input Files: Read Terminal, is applicable:

          $ awk "BEGIN { print \"Don't Panic!\" }"
          -| Don't Panic!

     Note that the single quote is not special within double quotes.

   * Null strings are removed when they occur as part of a non-null
     command-line argument, while explicit non-null objects are kept.
     For example, to specify that the field separator `FS' should be
     set to the null string, use:

          awk -F "" 'PROGRAM' FILES # correct

     Don't use this:

          awk -F"" 'PROGRAM' FILES  # wrong!

     In the second case, `awk' will attempt to use the text of the
     program as the value of `FS', and the first file name as the text
     of the program!  This results in syntax errors at best, and
     confusing behavior at worst.

   Mixing single and double quotes is difficult.  You have to resort to
shell quoting tricks, like this:

     $ awk 'BEGIN { print "Here is a single quote <'"'"'>" }'
     -| Here is a single quote <'>

This program consists of three concatenated quoted strings.  The first
and the third are single-quoted, the second is double-quoted.

   This can be "simplified" to:

     $ awk 'BEGIN { print "Here is a single quote <'\''>" }'
     -| Here is a single quote <'>

Judge for yourself which of these two is the more readable.

   Another option is to use double quotes, escaping the embedded,
`awk'-level double quotes:

     $ awk "BEGIN { print \"Here is a single quote <'>\" }"
     -| Here is a single quote <'>

This option is also painful, because double quotes, backslashes, and
dollar signs are very common in `awk' programs.

   If you really need both single and double quotes in your `awk'
program, it is probably best to move it into a separate file, where the
shell won't be part of the picture, and you can say what you mean.


File: gawk.info,  Node: Sample Data Files,  Next: Very Simple,  Prev: Running gawk,  Up: Getting Started

Data Files for the Examples
===========================

   Many of the examples in this Info file take their input from two
sample data files.  The first, `BBS-list', represents a list of
computer bulletin board systems together with information about those
systems.  The second data file, called `inventory-shipped', contains
information about monthly shipments.  In both files, each line is
considered to be one "record".

   In the data file `BBS-list', each record contains the name of a
computer bulletin board, its phone number, the board's baud rate(s),
and a code for the number of hours it is operational.  An `A' in the
last column means the board operates 24 hours a day.  A `B' in the last
column means the board only operates on evening and weekend hours.  A
`C' means the board operates only on weekends:

     aardvark     555-5553     1200/300          B
     alpo-net     555-3412     2400/1200/300     A
     barfly       555-7685     1200/300          A
     bites        555-1675     2400/1200/300     A
     camelot      555-0542     300               C
     core         555-2912     1200/300          C
     fooey        555-1234     2400/1200/300     B
     foot         555-6699     1200/300          B
     macfoo       555-6480     1200/300          A
     sdace        555-3430     2400/1200/300     A
     sabafoo      555-2127     1200/300          C

   The data file `inventory-shipped' represents information about
shipments during the year.  Each record contains the month, the number
of green crates shipped, the number of red boxes shipped, the number of
orange bags shipped, and the number of blue packages shipped,
respectively.  There are 16 entries, covering the 12 months of last year
and the first four months of the current year.

     Jan  13  25  15 115
     Feb  15  32  24 226
     Mar  15  24  34 228
     Apr  31  52  63 420
     May  16  34  29 208
     Jun  31  42  75 492
     Jul  24  34  67 436
     Aug  15  34  47 316
     Sep  13  55  37 277
     Oct  29  54  68 525
     Nov  20  87  82 577
     Dec  17  35  61 401
     
     Jan  21  36  64 620
     Feb  26  58  80 652
     Mar  24  75  70 495
     Apr  21  70  74 514

   If you are reading this in GNU Emacs using Info, you can copy the
regions of text showing these sample files into your own test files.
This way you can try out the examples shown in the remainder of this
document.  You do this by using the command `M-x write-region' to copy
text from the Info file into a file for use with `awk' (*Note
Miscellaneous File Operations: (emacs)Misc File Ops, for more
information).  Using this information, create your own `BBS-list' and
`inventory-shipped' files and practice what you learn in this Info file.

   If you are using the stand-alone version of Info, see *Note
Extracting Programs from Texinfo Source Files: Extract Program, for an
`awk' program that extracts these data files from `gawk.texi', the
Texinfo source file for this Info file.


File: gawk.info,  Node: Very Simple,  Next: Two Rules,  Prev: Sample Data Files,  Up: Getting Started

Some Simple Examples
====================

   The following command runs a simple `awk' program that searches the
input file `BBS-list' for the character string `foo' (a grouping of
characters is usually called a "string"; the term "string" is based on
similar usage in English, such as "a string of pearls," or "a string of
cars in a train"):

     awk '/foo/ { print $0 }' BBS-list

When lines containing `foo' are found, they are printed because
`print $0' means print the current line.  (Just `print' by itself means
the same thing, so we could have written that instead.)

   You will notice that slashes (`/') surround the string `foo' in the
`awk' program.  The slashes indicate that `foo' is the pattern to
search for.  This type of pattern is called a "regular expression",
which is covered in more detail later (*note Regular Expressions:
Regexp.).  The pattern is allowed to match parts of words.  There are
single quotes around the `awk' program so that the shell won't
interpret any of it as special shell characters.

   Here is what this program prints:

     $ awk '/foo/ { print $0 }' BBS-list
     -| fooey        555-1234     2400/1200/300     B
     -| foot         555-6699     1200/300          B
     -| macfoo       555-6480     1200/300          A
     -| sabafoo      555-2127     1200/300          C

   In an `awk' rule, either the pattern or the action can be omitted,
but not both.  If the pattern is omitted, then the action is performed
for _every_ input line.  If the action is omitted, the default action
is to print all lines that match the pattern.

   Thus, we could leave out the action (the `print' statement and the
curly braces) in the previous example and the result would be the same:
all lines matching the pattern `foo' are printed.  By comparison,
omitting the `print' statement but retaining the curly braces makes an
empty action that does nothing (i.e., no lines are printed).

   Many practical `awk' programs are just a line or two.  Following is a
collection of useful, short programs to get you started.  Some of these
programs contain constructs that haven't been covered yet. (The
description of the program will give you a good idea of what is going
on, but please read the rest of the Info file to become an `awk'
expert!)  Most of the examples use a data file named `data'.  This is
just a placeholder; if you use these programs yourself, substitute your
own file names for `data'.  For future reference, note that there is
often more than one way to do things in `awk'.  At some point, you may
want to look back at these examples and see if you can come up with
different ways to do the same things shown here:

   * Print the length of the longest input line:

          awk '{ if (length($0) > max) max = length($0) }
               END { print max }' data

   * Print every line that is longer than 80 characters:

          awk 'length($0) > 80' data

     The sole rule has a relational expression as its pattern and it
     has no action--so the default action, printing the record, is used.

   * Print the length of the longest line in `data':

          expand data | awk '{ if (x < length()) x = length() }
                        END { print "maximum line length is " x }'

     The input is processed by the `expand' utility to change tabs into
     spaces, so the widths compared are actually the right-margin
     columns.

   * Print every line that has at least one field:

          awk 'NF > 0' data

     This is an easy way to delete blank lines from a file (or rather,
     to create a new file similar to the old file but from which the
     blank lines have been removed).

   * Print seven random numbers from 0 to 100, inclusive:

          awk 'BEGIN { for (i = 1; i <= 7; i++)
                           print int(101 * rand()) }'

   * Print the total number of bytes used by FILES:

          ls -l FILES | awk '{ x += $5 }
                            END { print "total bytes: " x }'

   * Print the total number of kilobytes used by FILES:

          ls -l FILES | awk '{ x += $5 }
             END { print "total K-bytes: " (x + 1023)/1024 }'

   * Print a sorted list of the login names of all users:

          awk -F: '{ print $1 }' /etc/passwd | sort

   * Count the lines in a file:

          awk 'END { print NR }' data

   * Print the even-numbered lines in the data file:

          awk 'NR % 2 == 0' data

     If you use the expression `NR % 2 == 1' instead, the program would
     print the odd-numbered lines.


File: gawk.info,  Node: Two Rules,  Next: More Complex,  Prev: Very Simple,  Up: Getting Started

An Example with Two Rules
=========================

   The `awk' utility reads the input files one line at a time.  For
each line, `awk' tries the patterns of each of the rules.  If several
patterns match, then several actions are run in the order in which they
appear in the `awk' program.  If no patterns match, then no actions are
run.

   After processing all the rules that match the line (and perhaps
there are none), `awk' reads the next line.  (However, *note The `next'
Statement: Next Statement., and also *note Using `gawk''s `nextfile'
Statement: Nextfile Statement.).  This continues until the program
reaches the end of the file.  For example, the following `awk' program
contains two rules:

     /12/  { print $0 }
     /21/  { print $0 }

The first rule has the string `12' as the pattern and `print $0' as the
action.  The second rule has the string `21' as the pattern and also
has `print $0' as the action.  Each rule's action is enclosed in its
own pair of braces.

   This program prints every line that contains the string `12' _or_
the string `21'.  If a line contains both strings, it is printed twice,
once by each rule.

   This is what happens if we run this program on our two sample data
files, `BBS-list' and `inventory-shipped':

     $ awk '/12/ { print $0 }
     >      /21/ { print $0 }' BBS-list inventory-shipped
     -| aardvark     555-5553     1200/300          B
     -| alpo-net     555-3412     2400/1200/300     A
     -| barfly       555-7685     1200/300          A
     -| bites        555-1675     2400/1200/300     A
     -| core         555-2912     1200/300          C
     -| fooey        555-1234     2400/1200/300     B
     -| foot         555-6699     1200/300          B
     -| macfoo       555-6480     1200/300          A
     -| sdace        555-3430     2400/1200/300     A
     -| sabafoo      555-2127     1200/300          C
     -| sabafoo      555-2127     1200/300          C
     -| Jan  21  36  64 620
     -| Apr  21  70  74 514

Note how the line beginning with `sabafoo' in `BBS-list' was printed
twice, once for each rule.


File: gawk.info,  Node: More Complex,  Next: Statements/Lines,  Prev: Two Rules,  Up: Getting Started

A More Complex Example
======================

   Now that we've mastered some simple tasks, let's look at what
typical `awk' programs do.  This example shows how `awk' can be used to
summarize, select, and rearrange the output of another utility.  It uses
features that haven't been covered yet, so don't worry if you don't
understand all the details:

     ls -l | awk '$6 == "Nov" { sum += $5 }
                  END { print sum }'

   This command prints the total number of bytes in all the files in the
current directory that were last modified in November (of any year).
(1) The `ls -l' part of this example is a system command that gives you
a listing of the files in a directory, including each file's size and
the date the file was last modified. Its output looks like this:

     -rw-r--r--  1 arnold   user   1933 Nov  7 13:05 Makefile
     -rw-r--r--  1 arnold   user  10809 Nov  7 13:03 awk.h
     -rw-r--r--  1 arnold   user    983 Apr 13 12:14 awk.tab.h
     -rw-r--r--  1 arnold   user  31869 Jun 15 12:20 awk.y
     -rw-r--r--  1 arnold   user  22414 Nov  7 13:03 awk1.c
     -rw-r--r--  1 arnold   user  37455 Nov  7 13:03 awk2.c
     -rw-r--r--  1 arnold   user  27511 Dec  9 13:07 awk3.c
     -rw-r--r--  1 arnold   user   7989 Nov  7 13:03 awk4.c

The first field contains read-write permissions, the second field
contains the number of links to the file, and the third field
identifies the owner of the file. The fourth field identifies the group
of the file.  The fifth field contains the size of the file in bytes.
The sixth, seventh, and eighth fields contain the month, day, and time,
respectively, that the file was last modified.  Finally, the ninth field
contains the name of the file.(2)

   The `$6 == "Nov"' in our `awk' program is an expression that tests
whether the sixth field of the output from `ls -l' matches the string
`Nov'.  Each time a line has the string `Nov' for its sixth field, the
action `sum += $5' is performed.  This adds the fifth field (the file's
size) to the variable `sum'.  As a result, when `awk' has finished
reading all the input lines, `sum' is the total of the sizes of the
files whose lines matched the pattern.  (This works because `awk'
variables are automatically initialized to zero.)

   After the last line of output from `ls' has been processed, the
`END' rule executes and prints the value of `sum'.  In this example,
the value of `sum' is 140963.

   These more advanced `awk' techniques are covered in later sections
(*note Actions: Action Overview.).  Before you can move on to more
advanced `awk' programming, you have to know how `awk' interprets your
input and displays your output.  By manipulating fields and using
`print' statements, you can produce some very useful and
impressive-looking reports.

   ---------- Footnotes ----------

   (1) In the C shell (`csh'), you need to type a semicolon and then a
backslash at the end of the first line; see *Note `awk' Statements
Versus Lines: Statements/Lines, for an explanation.  In a
POSIX-compliant shell, such as the Bourne shell or `bash', you can type
the example as shown.  If the command `echo $path' produces an empty
output line, you are most likely using a POSIX-compliant shell.
Otherwise, you are probably using the C shell or a shell derived from
it.

   (2) On some very old systems, you may need to use `ls -lg' to get
this output.


File: gawk.info,  Node: Statements/Lines,  Next: Other Features,  Prev: More Complex,  Up: Getting Started

`awk' Statements Versus Lines
=============================

   Most often, each line in an `awk' program is a separate statement or
separate rule, like this:

     awk '/12/  { print $0 }
          /21/  { print $0 }' BBS-list inventory-shipped

   However, `gawk' ignores newlines after any of the following symbols
and keywords:

     ,    {    ?    :    ||    &&    do    else

A newline at any other point is considered the end of the statement.(1)

   If you would like to split a single statement into two lines at a
point where a newline would terminate it, you can "continue" it by
ending the first line with a backslash character (`\').  The backslash
must be the final character on the line in order to be recognized as a
continuation character.  A backslash is allowed anywhere in the
statement, even in the middle of a string or regular expression.  For
example:

     awk '/This regular expression is too long, so continue it\
      on the next line/ { print $1 }'

We have generally not used backslash continuation in the sample programs
in this Info file.  In `gawk', there is no limit on the length of a
line, so backslash continuation is never strictly necessary; it just
makes programs more readable.  For this same reason, as well as for
clarity, we have kept most statements short in the sample programs
presented throughout the Info file.  Backslash continuation is most
useful when your `awk' program is in a separate source file instead of
entered from the command line.  You should also note that many `awk'
implementations are more particular about where you may use backslash
continuation. For example, they may not allow you to split a string
constant using backslash continuation.  Thus, for maximum portability
of your `awk' programs, it is best not to split your lines in the
middle of a regular expression or a string.

   *Caution:* _Backslash continuation does not work as described with
the C shell._  It works for `awk' programs in files and for one-shot
programs, _provided_ you are using a POSIX-compliant shell, such as the
Unix Bourne shell or `bash'.  But the C shell behaves differently!
There, you must use two backslashes in a row, followed by a newline.
Note also that when using the C shell, _every_ newline in your awk
program must be escaped with a backslash. To illustrate:

     % awk 'BEGIN { \
     ?   print \\
     ?       "hello, world" \
     ? }'
     -| hello, world

Here, the `%' and `?' are the C shell's primary and secondary prompts,
analogous to the standard shell's `$' and `>'.

   Compare the previous example to how it is done with a
POSIX-compliant shell:

     $ awk 'BEGIN {
     >   print \
     >       "hello, world"
     > }'
     -| hello, world

   `awk' is a line-oriented language.  Each rule's action has to begin
on the same line as the pattern.  To have the pattern and action on
separate lines, you _must_ use backslash continuation; there is no
other option.

   Another thing to keep in mind is that backslash continuation and
comments do not mix. As soon as `awk' sees the `#' that starts a
comment, it ignores _everything_ on the rest of the line. For example:

     $ gawk 'BEGIN { print "dont panic" # a friendly \
     >                                    BEGIN rule
     > }'
     error--> gawk: cmd. line:2:                BEGIN rule
     error--> gawk: cmd. line:2:                ^ parse error

In this case, it looks like the backslash would continue the comment
onto the next line. However, the backslash-newline combination is never
even noticed because it is "hidden" inside the comment. Thus, the
`BEGIN' is noted as a syntax error.

   When `awk' statements within one rule are short, you might want to
put more than one of them on a line.  This is accomplished by
separating the statements with a semicolon (`;').  This also applies to
the rules themselves.  Thus, the program shown at the start of this
minor node could also be written this way:

     /12/ { print $0 } ; /21/ { print $0 }

*Note:* The requirement that states that rules on the same line must be
separated with a semicolon was not in the original `awk' language; it
was added for consistency with the treatment of statements within an
action.

   ---------- Footnotes ----------

   (1) The `?' and `:' referred to here is the three-operand
conditional expression described in *Note Conditional Expressions:
Conditional Exp.  Splitting lines after `?' and `:' is a minor `gawk'
extension; if `--posix' is specified (*note Command-Line Options:
Options.), then this extension is disabled.


File: gawk.info,  Node: Other Features,  Next: When,  Prev: Statements/Lines,  Up: Getting Started

Other Features of `awk'
=======================

   The `awk' language provides a number of predefined, or "built-in",
variables that your programs can use to get information from `awk'.
There are other variables your program can set as well to control how
`awk' processes your data.

   In addition, `awk' provides a number of built-in functions for doing
common computational and string-related operations.  `gawk' provides
built-in functions for working with timestamps, performing bit
manipulation, and for runtime string translation.

   As we develop our presentation of the `awk' language, we introduce
most of the variables and many of the functions. They are defined
systematically in *Note Built-in Variables::, and *Note Built-in
Functions: Built-in.


File: gawk.info,  Node: When,  Prev: Other Features,  Up: Getting Started

When to Use `awk'
=================

   Now that you've seen some of what `awk' can do, you might wonder how
`awk' could be useful for you.  By using utility programs, advanced
patterns, field separators, arithmetic statements, and other selection
criteria, you can produce much more complex output.  The `awk' language
is very useful for producing reports from large amounts of raw data,
such as summarizing information from the output of other utility
programs like `ls'.  (*Note A More Complex Example: More Complex.)

   Programs written with `awk' are usually much smaller than they would
be in other languages.  This makes `awk' programs easy to compose and
use.  Often, `awk' programs can be quickly composed at your terminal,
used once, and thrown away.  Because `awk' programs are interpreted, you
can avoid the (usually lengthy) compilation part of the typical
edit-compile-test-debug cycle of software development.

   Complex programs have been written in `awk', including a complete
retargetable assembler for eight-bit microprocessors (*note Glossary::,
for more information), and a microcode assembler for a special-purpose
Prolog computer.  However, `awk''s capabilities are strained by tasks of
such complexity.

   If you find yourself writing `awk' scripts of more than, say, a few
hundred lines, you might consider using a different programming
language.  Emacs Lisp is a good choice if you need sophisticated string
or pattern matching capabilities.  The shell is also good at string and
pattern matching; in addition, it allows powerful use of the system
utilities.  More conventional languages, such as C, C++, and Java, offer
better facilities for system programming and for managing the complexity
of large programs.  Programs in these languages may require more lines
of source code than the equivalent `awk' programs, but they are easier
to maintain and usually run more efficiently.


File: gawk.info,  Node: Regexp,  Next: Reading Files,  Prev: Getting Started,  Up: Top

Regular Expressions
*******************

   A "regular expression", or "regexp", is a way of describing a set of
strings.  Because regular expressions are such a fundamental part of
`awk' programming, their format and use deserve a separate major node.

   A regular expression enclosed in slashes (`/') is an `awk' pattern
that matches every input record whose text belongs to that set.  The
simplest regular expression is a sequence of letters, numbers, or both.
Such a regexp matches any string that contains that sequence.  Thus,
the regexp `foo' matches any string containing `foo'.  Therefore, the
pattern `/foo/' matches any input record containing the three
characters `foo' _anywhere_ in the record.  Other kinds of regexps let
you specify more complicated classes of strings.

* Menu:

* Regexp Usage::                How to Use Regular Expressions.
* Escape Sequences::            How to write nonprinting characters.
* Regexp Operators::            Regular Expression Operators.
* Character Lists::             What can go between `[...]'.
* GNU Regexp Operators::        Operators specific to GNU software.
* Case-sensitivity::            How to do case-insensitive matching.
* Leftmost Longest::            How much text matches.
* Computed Regexps::            Using Dynamic Regexps.


File: gawk.info,  Node: Regexp Usage,  Next: Escape Sequences,  Prev: Regexp,  Up: Regexp

How to Use Regular Expressions
==============================

   A regular expression can be used as a pattern by enclosing it in
slashes.  Then the regular expression is tested against the entire text
of each record.  (Normally, it only needs to match some part of the
text in order to succeed.)  For example, the following prints the
second field of each record that contains the string `foo' anywhere in
it:

     $ awk '/foo/ { print $2 }' BBS-list
     -| 555-1234
     -| 555-6699
     -| 555-6480
     -| 555-2127

   `~' (tilde), `~' operator Regular expressions can also be used in
matching expressions.  These expressions allow you to specify the
string to match against; it need not be the entire current input
record.  The two operators `~' and `!~' perform regular expression
comparisons.  Expressions using these operators can be used as
patterns, or in `if', `while', `for', and `do' statements.  (*Note
Control Statements in Actions: Statements.)  For example:

     EXP ~ /REGEXP/

is true if the expression EXP (taken as a string) matches REGEXP.  The
following example matches, or selects, all input records with the
uppercase letter `J' somewhere in the first field:

     $ awk '$1 ~ /J/' inventory-shipped
     -| Jan  13  25  15 115
     -| Jun  31  42  75 492
     -| Jul  24  34  67 436
     -| Jan  21  36  64 620

   So does this:

     awk '{ if ($1 ~ /J/) print }' inventory-shipped

   This next example is true if the expression EXP (taken as a
character string) does _not_ match REGEXP:

     EXP !~ /REGEXP/

   The following example matches, or selects, all input records whose
first field _does not_ contain the uppercase letter `J':

     $ awk '$1 !~ /J/' inventory-shipped
     -| Feb  15  32  24 226
     -| Mar  15  24  34 228
     -| Apr  31  52  63 420
     -| May  16  34  29 208
     ...

   When a regexp is enclosed in slashes, such as `/foo/', we call it a
"regexp constant", much like `5.27' is a numeric constant and `"foo"'
is a string constant.


File: gawk.info,  Node: Escape Sequences,  Next: Regexp Operators,  Prev: Regexp Usage,  Up: Regexp

Escape Sequences
================

   Some characters cannot be included literally in string constants
(`"foo"') or regexp constants (`/foo/').  Instead, they should be
represented with "escape sequences", which are character sequences
beginning with a backslash (`\').  One use of an escape sequence is to
include a double-quote character in a string constant.  Because a plain
double quote ends the string, you must use `\"' to represent an actual
double-quote character as a part of the string.  For example:

     $ awk 'BEGIN { print "He said \"hi!\" to her." }'
     -| He said "hi!" to her.

   The  backslash character itself is another character that cannot be
included normally; you must write `\\' to put one backslash in the
string or regexp.  Thus, the string whose contents are the two
characters `"' and `\' must be written `"\"\\"'.

   Backslash also represents unprintable characters such as TAB or
newline.  While there is nothing to stop you from entering most
unprintable characters directly in a string constant or regexp constant,
they may look ugly.

   The following table lists all the escape sequences used in `awk' and
what they represent. Unless noted otherwise, all these escape sequences
apply to both string constants and regexp constants:

`\\'
     A literal backslash, `\'.

`\a'
     The "alert" character, `Ctrl-g', ASCII code 7 (BEL).  (This
     usually makes some sort of audible noise.)

`\b'
     Backspace, `Ctrl-h', ASCII code 8 (BS).

`\f'
     Formfeed, `Ctrl-l', ASCII code 12 (FF).

`\n'
     Newline, `Ctrl-j', ASCII code 10 (LF).

`\r'
     Carriage return, `Ctrl-m', ASCII code 13 (CR).

`\t'
     Horizontal TAB, `Ctrl-i', ASCII code 9 (HT).

`\v'
     Vertical tab, `Ctrl-k', ASCII code 11 (VT).

`\NNN'
     The octal value NNN, where NNN stands for 1 to 3 digits between
     `0' and `7'.  For example, the code for the ASCII ESC (escape)
     character is `\033'.

`\xHH...'
     The hexadecimal value HH, where HH stands for a sequence of
     hexadecimal digits (`0'-`9', and either `A'-`F' or `a'-`f').  Like
     the same construct in ISO C, the escape sequence continues until
     the first nonhexadecimal digit is seen.  However, using more than
     two hexadecimal digits produces undefined results. (The `\x'
     escape sequence is not allowed in POSIX `awk'.)

`\/'
     A literal slash (necessary for regexp constants only).  This
     expression is used when you want to write a regexp constant that
     contains a slash. Because the regexp is delimited by slashes, you
     need to escape the slash that is part of the pattern, in order to
     tell `awk' to keep processing the rest of the regexp.

`\"'
     A literal double quote (necessary for string constants only).
     This expression is used when you want to write a string constant
     that contains a double quote. Because the string is delimited by
     double quotes, you need to escape the quote that is part of the
     string, in order to tell `awk' to keep processing the rest of the
     string.

   In `gawk', a number of additional two-character sequences that begin
with a backslash have special meaning in regexps.  *Note
`gawk'-Specific Regexp Operators: GNU Regexp Operators.

   In a regexp, a backslash before any character that is not in the
previous list and not listed in *Note `gawk'-Specific Regexp Operators:
GNU Regexp Operators, means that the next character should be taken
literally, even if it would normally be a regexp operator.  For
example, `/a\+b/' matches the three characters `a+b'.

   For complete portability, do not use a backslash before any
character not shown in the previous list.

   To summarize:

   * The escape sequences in the table above are always processed first,
     for both string constants and regexp constants. This happens very
     early, as soon as `awk' reads your program.

   * `gawk' processes both regexp constants and dynamic regexps (*note
     Using Dynamic Regexps: Computed Regexps.), for the special
     operators listed in *Note `gawk'-Specific Regexp Operators: GNU
     Regexp Operators.

   * A backslash before any other character means to treat that
     character literally.

Advanced Notes: Backslash Before Regular Characters
---------------------------------------------------

   If you place a backslash in a string constant before something that
is not one of the characters previously listed, POSIX `awk' purposely
leaves what happens as undefined.  There are two choices:

Strip the backslash out
     This is what Unix `awk' and `gawk' both do.  For example, `"a\qc"'
     is the same as `"aqc"'.  (Because this is such an easy bug both to
     introduce and to miss, `gawk' warns you about it.)  Consider `FS =
     "[ \t]+\|[ \t]+"' to use vertical bars surrounded by whitespace as
     the field separator. There should be two backslashes in the string
     `FS = "[ \t]+\\|[ \t]+"'.)

Leave the backslash alone
     Some other `awk' implementations do this.  In such
     implementations, typing `"a\qc"' is the same as typing `"a\\qc"'.

Advanced Notes: Escape Sequences for Metacharacters
---------------------------------------------------

   Suppose you use an octal or hexadecimal escape to represent a regexp
metacharacter.  (See *Note Regular Expression Operators: Regexp
Operators.)  Does `awk' treat the character as a literal character or
as a regexp operator?

   Historically, such characters were taken literally.  (d.c.)
However, the POSIX standard indicates that they should be treated as
real metacharacters, which is what `gawk' does.  In compatibility mode
(*note Command-Line Options: Options.), `gawk' treats the characters
represented by octal and hexadecimal escape sequences literally when
used in regexp constants. Thus, `/a\52b/' is equivalent to `/a\*b/'.


File: gawk.info,  Node: Regexp Operators,  Next: Character Lists,  Prev: Escape Sequences,  Up: Regexp

Regular Expression Operators
============================

   You can combine regular expressions with special characters, called
"regular expression operators" or "metacharacters", to increase the
power and versatility of regular expressions.

   The escape sequences described in *Note Escape Sequences::, are
valid inside a regexp.  They are introduced by a `\' and are recognized
and converted into corresponding real characters as the very first step
in processing regexps.

   Here is a list of metacharacters.  All characters that are not escape
sequences and that are not listed in the table stand for themselves:

`\'
     This is used to suppress the special meaning of a character when
     matching.  For example, `\$' matches the character `$'.

`^'
     This matches the beginning of a string.  For example, `^@chapter'
     matches `@chapter' at the beginning of a string and can be used to
     identify chapter beginnings in Texinfo source files.  The `^' is
     known as an "anchor", because it anchors the pattern to match only
     at the beginning of the string.

     It is important to realize that `^' does not match the beginning of
     a line embedded in a string.  The condition is not true in the
     following example:

          if ("line1\nLINE 2" ~ /^L/) ...

`$'
     This is similar to `^', but it matches only at the end of a string.
     For example, `p$' matches a record that ends with a `p'.  The `$'
     is an anchor and does not match the end of a line embedded in a
     string.  The condition in the following example is not true:

          if ("line1\nLINE 2" ~ /1$/) ...

`.'
     This matches any single character, _including_ the newline
     character.  For example, `.P' matches any single character
     followed by a `P' in a string.  Using concatenation, we can make a
     regular expression such as `U.A', which matches any
     three-character sequence that begins with `U' and ends with `A'.

     In strict POSIX mode (*note Command-Line Options: Options.), `.'
     does not match the NUL character, which is a character with all
     bits equal to zero.  Otherwise, NUL is just another character.
     Other versions of `awk' may not be able to match the NUL character.

`[...]'
     This is called a "character list".(1) It matches any _one_ of the
     characters that are enclosed in the square brackets.  For example,
     `[MVX]' matches any one of the characters `M', `V', or `X' in a
     string.  A full discussion of what can be inside the square
     brackets of a character list is given in *Note Using Character
     Lists: Character Lists.

`[^ ...]'
     This is a "complemented character list".  The first character after
     the `[' _must_ be a `^'.  It matches any characters _except_ those
     in the square brackets.  For example, `[^awk]' matches any
     character that is not an `a', `w', or `k'.

`|'
     This is the "alternation operator" and it is used to specify
     alternatives.  The `|' has the lowest precedence of all the regular
     expression operators.  For example, `^P|[[:digit:]]' matches any
     string that matches either `^P' or `[[:digit:]]'.  This means it
     matches any string that starts with `P' or contains a digit.

     The alternation applies to the largest possible regexps on either
     side.

`(...)'
     Parentheses are used for grouping in regular expressions, as in
     arithmetic.  They can be used to concatenate regular expressions
     containing the alternation operator, `|'.  For example,
     `@(samp|code)\{[^}]+\}' matches both `@code{foo}' and `@samp{bar}'.
     (These are Texinfo formatting control sequences.)

`*'
     This symbol means that the preceding regular expression should be
     repeated as many times as necessary to find a match.  For example,
     `ph*' applies the `*' symbol to the preceding `h' and looks for
     matches of one `p' followed by any number of `h's.  This also
     matches just `p' if no `h's are present.

     The `*' repeats the _smallest_ possible preceding expression.
     (Use parentheses if you want to repeat a larger expression.)  It
     finds as many repetitions as possible.  For example, `awk
     '/\(c[ad][ad]*r x\)/ { print }' sample' prints every record in
     `sample' containing a string of the form `(car x)', `(cdr x)',
     `(cadr x)', and so on.  Notice the escaping of the parentheses by
     preceding them with backslashes.

`+'
     This symbol is similar to `*', except that the preceding
     expression must be matched at least once.  This means that `wh+y'
     would match `why' and `whhy', but not `wy', whereas `wh*y' would
     match all three of these strings.  The following is a simpler way
     of writing the last `*' example:

          awk '/\(c[ad]+r x\)/ { print }' sample

`?'
     This symbol is similar to `*', except that the preceding
     expression can be matched either once or not at all.  For example,
     `fe?d' matches `fed' and `fd', but nothing else.

`{N}'
`{N,}'
`{N,M}'
     One or two numbers inside braces denote an "interval expression".
     If there is one number in the braces, the preceding regexp is
     repeated N times.  If there are two numbers separated by a comma,
     the preceding regexp is repeated N to M times.  If there is one
     number followed by a comma, then the preceding regexp is repeated
     at least N times:

    `wh{3}y'
          Matches `whhhy', but not `why' or `whhhhy'.

    `wh{3,5}y'
          Matches `whhhy', `whhhhy', or `whhhhhy', only.

    `wh{2,}y'
          Matches `whhy' or `whhhy', and so on.

     Interval expressions were not traditionally available in `awk'.
     They were added as part of the POSIX standard to make `awk' and
     `egrep' consistent with each other.

     However, because old programs may use `{' and `}' in regexp
     constants, by default `gawk' does _not_ match interval expressions
     in regexps.  If either `--posix' or `--re-interval' are specified
     (*note Command-Line Options: Options.), then interval expressions
     are allowed in regexps.

     For new programs that use `{' and `}' in regexp constants, it is
     good practice to always escape them with a backslash.  Then the
     regexp constants are valid and work the way you want them to, using
     any version of `awk'.(2)

   In regular expressions, the `*', `+', and `?' operators, as well as
the braces `{' and `}', have the highest precedence, followed by
concatenation, and finally by `|'.  As in arithmetic, parentheses can
change how operators are grouped.

   In POSIX `awk' and `gawk', the `*', `+', and `?' operators stand for
themselves when there is nothing in the regexp that precedes them.  For
example, `/+/' matches a literal plus sign.  However, many other
versions of `awk' treat such a usage as a syntax error.

   If `gawk' is in compatibility mode (*note Command-Line Options:
Options.), POSIX character classes and interval expressions are not
available in regular expressions.

   ---------- Footnotes ----------

   (1) In other literature, you may see a character list referred to as
either a "character set", a "character class", or a "bracket
expression".

   (2) Use two backslashes if you're using a string constant with a
regexp operator or function.


File: gawk.info,  Node: Character Lists,  Next: GNU Regexp Operators,  Prev: Regexp Operators,  Up: Regexp

Using Character Lists
=====================

   Within a character list, a "range expression" consists of two
characters separated by a hyphen.  It matches any single character that
sorts between the two characters, using the locale's collating sequence
and character set.  For example, in the default C locale, `[a-dx-z]' is
equivalent to `[abcdxyz]'.  Many locales sort characters in dictionary
order, and in these locales, `[a-dx-z]' is typically not equivalent to
`[abcdxyz]'; instead it might be equivalent to `[aBbCcDdxXyYz]', for
example.  To obtain the traditional interpretation of bracket
expressions, you can use the C locale by setting the `LC_ALL'
environment variable to the value `C'.

   To include one of the characters `\', `]', `-', or `^' in a
character list, put a `\' in front of it.  For example:

     [d\]]

matches either `d' or `]'.

   This treatment of `\' in character lists is compatible with other
`awk' implementations and is also mandated by POSIX.  The regular
expressions in `awk' are a superset of the POSIX specification for
Extended Regular Expressions (EREs).  POSIX EREs are based on the
regular expressions accepted by the traditional `egrep' utility.

   "Character classes" are a new feature introduced in the POSIX
standard.  A character class is a special notation for describing lists
of characters that have a specific attribute, but the actual characters
can vary from country to country and/or from character set to character
set.  For example, the notion of what is an alphabetic character
differs between the United States and France.

   A character class is only valid in a regexp _inside_ the brackets of
a character list.  Character classes consist of `[:', a keyword
denoting the class, and `:]'.  Here are the character classes defined
by the POSIX standard.

`[:alnum:]'    Alphanumeric characters.
`[:alpha:]'    Alphabetic characters.
`[:blank:]'    Space and TAB characters.
`[:cntrl:]'    Control characters.
`[:digit:]'    Numeric characters.
`[:graph:]'    Characters that are both printable and visible.  (A space is
               printable but not visible, whereas an `a' is both.)
`[:lower:]'    Lowercase alphabetic characters.
`[:print:]'    Printable characters (characters that are not control
               characters).
`[:punct:]'    Punctuation characters (characters that are not letters,
               digits, control characters, or space characters).
`[:space:]'    Space characters (such as space, TAB, and formfeed, to name a
               few).
`[:upper:]'    Uppercase alphabetic characters.
`[:xdigit:]'   Characters that are hexadecimal digits.

   For example, before the POSIX standard, you had to write
`/[A-Za-z0-9]/' to match alphanumeric characters.  If your character
set had other alphabetic characters in it, this would not match them,
and if your character set collated differently from ASCII, this might
not even match the ASCII alphanumeric characters.  With the POSIX
character classes, you can write `/[[:alnum:]]/' to match the alphabetic
and numeric characters in your character set.

   Two additional special sequences can appear in character lists.
These apply to non-ASCII character sets, which can have single symbols
(called "collating elements") that are represented with more than one
character. They can also have several characters that are equivalent for
"collating", or sorting, purposes.  (For example, in French, a plain "e"
and a grave-accented "e`" are equivalent.)  These sequences are:

Collating symbols
     Multicharacter collating elements enclosed between `[.' and `.]'.
     For example, if `ch' is a collating element, then `[[.ch.]]' is a
     regexp that matches this collating element, whereas `[ch]' is a
     regexp that matches either `c' or `h'.

Equivalence classes
     Locale-specific names for a list of characters that are equal. The
     name is enclosed between `[=' and `=]'.  For example, the name `e'
     might be used to represent all of "e," "e`," and "e'." In this
     case, `[[=e=]]' is a regexp that matches any of `e', `e'', or `e`'.

   These features are very valuable in non-English-speaking locales.

   *Caution:* The library functions that `gawk' uses for regular
expression matching currently recognize only POSIX character classes;
they do not recognize collating symbols or equivalence classes.


File: gawk.info,  Node: GNU Regexp Operators,  Next: Case-sensitivity,  Prev: Character Lists,  Up: Regexp

`gawk'-Specific Regexp Operators
================================

   GNU software that deals with regular expressions provides a number of
additional regexp operators.  These operators are described in this
minor node and are specific to `gawk'; they are not available in other
`awk' implementations.  Most of the additional operators deal with word
matching.  For our purposes, a "word" is a sequence of one or more
letters, digits, or underscores (`_'):

`\w'
     Matches any word-constituent character--that is, it matches any
     letter, digit, or underscore. Think of it as shorthand for
     `[[:alnum:]_]'.

`\W'
     Matches any character that is not word-constituent.  Think of it
     as shorthand for `[^[:alnum:]_]'.

`\<'
     Matches the empty string at the beginning of a word.  For example,
     `/\<away/' matches `away' but not `stowaway'.

`\>'
     Matches the empty string at the end of a word.  For example,
     `/stow\>/' matches `stow' but not `stowaway'.

`\y'
     Matches the empty string at either the beginning or the end of a
     word (i.e., the word boundar*y*).  For example, `\yballs?\y'
     matches either `ball' or `balls', as a separate word.

`\B'
     Matches the empty string that occurs between two word-constituent
     characters. For example, `/\Brat\B/' matches `crate' but it does
     not match `dirty rat'.  `\B' is essentially the opposite of `\y'.

   There are two other operators that work on buffers.  In Emacs, a
"buffer" is, naturally, an Emacs buffer.  For other programs, `gawk''s
regexp library routines consider the entire string to match as the
buffer.  The operators are:

`\`'
     Matches the empty string at the beginning of a buffer (string).

`\''
     Matches the empty string at the end of a buffer (string).

   Because `^' and `$' always work in terms of the beginning and end of
strings, these operators don't add any new capabilities for `awk'.
They are provided for compatibility with other GNU software.

   In other GNU software, the word-boundary operator is `\b'. However,
that conflicts with the `awk' language's definition of `\b' as
backspace, so `gawk' uses a different letter.  An alternative method
would have been to require two backslashes in the GNU operators, but
this was deemed too confusing. The current method of using `\y' for the
GNU `\b' appears to be the lesser of two evils.

   The various command-line options (*note Command-Line Options:
Options.)  control how `gawk' interprets characters in regexps:

No options
     In the default case, `gawk' provides all the facilities of POSIX
     regexps and the GNU regexp operators described in *Note Regular
     Expression Operators: Regexp Operators.  However, interval
     expressions are not supported.

`--posix'
     Only POSIX regexps are supported; the GNU operators are not special
     (e.g., `\w' matches a literal `w').  Interval expressions are
     allowed.

`--traditional'
     Traditional Unix `awk' regexps are matched. The GNU operators are
     not special, interval expressions are not available, nor are the
     POSIX character classes (`[[:alnum:]]', etc.).  Characters
     described by octal and hexadecimal escape sequences are treated
     literally, even if they represent regexp metacharacters.

`--re-interval'
     Allow interval expressions in regexps, even if `--traditional' has
     been provided.


File: gawk.info,  Node: Case-sensitivity,  Next: Leftmost Longest,  Prev: GNU Regexp Operators,  Up: Regexp

Case Sensitivity in Matching
============================

   Case is normally significant in regular expressions, both when
matching ordinary characters (i.e., not metacharacters) and inside
character sets.  Thus, a `w' in a regular expression matches only a
lowercase `w' and not an uppercase `W'.

   The simplest way to do a case-independent match is to use a character
list--for example, `[Ww]'.  However, this can be cumbersome if you need
to use it often, and it can make the regular expressions harder to
read.  There are two alternatives that you might prefer.

   One way to perform a case-insensitive match at a particular point in
the program is to convert the data to a single case, using the
`tolower' or `toupper' built-in string functions (which we haven't
discussed yet; *note String Manipulation Functions: String Functions.).
For example:

     tolower($1) ~ /foo/  { ... }

converts the first field to lowercase before matching against it.  This
works in any POSIX-compliant `awk'.

   Another method, specific to `gawk', is to set the variable
`IGNORECASE' to a nonzero value (*note Built-in Variables::).  When
`IGNORECASE' is not zero, _all_ regexp and string operations ignore
case.  Changing the value of `IGNORECASE' dynamically controls the
case-sensitivity of the program as it runs.  Case is significant by
default because `IGNORECASE' (like most variables) is initialized to
zero:

     x = "aB"
     if (x ~ /ab/) ...   # this test will fail
     
     IGNORECASE = 1
     if (x ~ /ab/) ...   # now it will succeed

   In general, you cannot use `IGNORECASE' to make certain rules
case-insensitive and other rules case-sensitive, because there is no
straightforward way to set `IGNORECASE' just for the pattern of a
particular rule.(1) To do this, use either character lists or
`tolower'.  However, one thing you can do with `IGNORECASE' only is
dynamically turn case-sensitivity on or off for all the rules at once.

   `IGNORECASE' can be set on the command line or in a `BEGIN' rule
(*note Other Command-Line Arguments: Other Arguments.; also *note
Startup and Cleanup Actions: Using BEGIN/END.).  Setting `IGNORECASE'
from the command line is a way to make a program case-insensitive
without having to edit it.

   Prior to `gawk' 3.0, the value of `IGNORECASE' affected regexp
operations only. It did not affect string comparison with `==', `!=',
and so on.  Beginning with version 3.0, both regexp and string
comparison operations are also affected by `IGNORECASE'.

   Beginning with `gawk' 3.0, the equivalences between upper- and
lowercase characters are based on the ISO-8859-1 (ISO Latin-1)
character set. This character set is a superset of the traditional 128
ASCII characters, which also provides a number of characters suitable
for use with European languages.

   The value of `IGNORECASE' has no effect if `gawk' is in
compatibility mode (*note Command-Line Options: Options.).  Case is
always significant in compatibility mode.

   ---------- Footnotes ----------

   (1) Experienced C and C++ programmers will note that it is possible,
using something like `IGNORECASE = 1 && /foObAr/ { ... }' and
`IGNORECASE = 0 || /foobar/ { ... }'.  However, this is somewhat
obscure and we don't recommend it.


File: gawk.info,  Node: Leftmost Longest,  Next: Computed Regexps,  Prev: Case-sensitivity,  Up: Regexp

How Much Text Matches?
======================

   Consider the following:

     echo aaaabcd | awk '{ sub(/a+/, "<A>"); print }'

   This example uses the `sub' function (which we haven't discussed yet;
*note String Manipulation Functions: String Functions.)  to make a
change to the input record. Here, the regexp `/a+/' indicates "one or
more `a' characters," and the replacement text is `<A>'.

   The input contains four `a' characters.  `awk' (and POSIX) regular
expressions always match the leftmost, _longest_ sequence of input
characters that can match.  Thus, all four `a' characters are replaced
with `<A>' in this example:

     $ echo aaaabcd | awk '{ sub(/a+/, "<A>"); print }'
     -| <A>bcd

   For simple match/no-match tests, this is not so important. But when
doing text matching and substitutions with the `match', `sub', `gsub',
and `gensub' functions, it is very important.  *Note String
Manipulation Functions: String Functions, for more information on these
functions.  Understanding this principle is also important for
regexp-based record and field splitting (*note How Input Is Split into
Records: Records., and also *note Specifying How Fields Are Separated:
Field Separators.).


File: gawk.info,  Node: Computed Regexps,  Prev: Leftmost Longest,  Up: Regexp

Using Dynamic Regexps
=====================

   The righthand side of a `~' or `!~' operator need not be a regexp
constant (i.e., a string of characters between slashes).  It may be any
expression.  The expression is evaluated and converted to a string if
necessary; the contents of the string are used as the regexp.  A regexp
that is computed in this way is called a "dynamic regexp":

     BEGIN { digits_regexp = "[[:digit:]]+" }
     $0 ~ digits_regexp    { print }

This sets `digits_regexp' to a regexp that describes one or more digits,
and tests whether the input record matches this regexp.

   When using the `~' and `!~' *Caution:* When using the `~' and `!~'
operators, there is a difference between a regexp constant enclosed in
slashes and a string constant enclosed in double quotes.  If you are
going to use a string constant, you have to understand that the string
is, in essence, scanned _twice_: the first time when `awk' reads your
program, and the second time when it goes to match the string on the
lefthand side of the operator with the pattern on the right.  This is
true of any string-valued expression (such as `digits_regexp', shown
previously), not just string constants.

   What difference does it make if the string is scanned twice? The
answer has to do with escape sequences, and particularly with
backslashes.  To get a backslash into a regular expression inside a
string, you have to type two backslashes.

   For example, `/\*/' is a regexp constant for a literal `*'.  Only
one backslash is needed.  To do the same thing with a string, you have
to type `"\\*"'.  The first backslash escapes the second one so that
the string actually contains the two characters `\' and `*'.

   Given that you can use both regexp and string constants to describe
regular expressions, which should you use?  The answer is "regexp
constants," for several reasons:

   * String constants are more complicated to write and more difficult
     to read. Using regexp constants makes your programs less
     error-prone.  Not understanding the difference between the two
     kinds of constants is a common source of errors.

   * It is more efficient to use regexp constants. `awk' can note that
     you have supplied a regexp and store it internally in a form that
     makes pattern matching more efficient.  When using a string
     constant, `awk' must first convert the string into this internal
     form and then perform the pattern matching.

   * Using regexp constants is better form; it shows clearly that you
     intend a regexp match.

Advanced Notes: Using `\n' in Character Lists of Dynamic Regexps
----------------------------------------------------------------

   Some commercial versions of `awk' do not allow the newline character
to be used inside a character list for a dynamic regexp:

     $ awk '$0 ~ "[ \t\n]"'
     error--> awk: newline in character class [
     error--> ]...
     error-->  source line number 1
     error-->  context is
     error-->          >>>  <<<

   But a newline in a regexp constant works with no problem:

     $ awk '$0 ~ /[ \t\n]/'
     here is a sample line
     -| here is a sample line
     Ctrl-d

   `gawk' does not have this problem, and it isn't likely to occur
often in practice, but it's worth noting for future reference.


File: gawk.info,  Node: Reading Files,  Next: Printing,  Prev: Regexp,  Up: Top

Reading Input Files
*******************

   In the typical `awk' program, all input is read either from the
standard input (by default, this is the keyboard, but often it is a
pipe from another command) or from files whose names you specify on the
`awk' command line.  If you specify input files, `awk' reads them in
order, processing all the data from one before going on to the next.
The name of the current input file can be found in the built-in variable
`FILENAME' (*note Built-in Variables::).

   The input is read in units called "records", and is processed by the
rules of your program one record at a time.  By default, each record is
one line.  Each record is automatically split into chunks called
"fields".  This makes it more convenient for programs to work on the
parts of a record.

   On rare occasions, you may need to use the `getline' command.  The
`getline' command is valuable, both because it can do explicit input
from any number of files, and because the files used with it do not
have to be named on the `awk' command line (*note Explicit Input with
`getline': Getline.).

* Menu:

* Records::                     Controlling how data is split into records.
* Fields::                      An introduction to fields.
* Nonconstant Fields::          Nonconstant Field Numbers.
* Changing Fields::             Changing the Contents of a Field.
* Field Separators::            The field separator and how to change it.
* Constant Size::               Reading constant width data.
* Multiple Line::               Reading multi-line records.
* Getline::                     Reading files under explicit program control
                                using the `getline' function.


File: gawk.info,  Node: Records,  Next: Fields,  Prev: Reading Files,  Up: Reading Files

How Input Is Split into Records
===============================

   The `awk' utility divides the input for your `awk' program into
records and fields.  `awk' keeps track of the number of records that
have been read so far from the current input file.  This value is
stored in a built-in variable called `FNR'.  It is reset to zero when a
new file is started.  Another built-in variable, `NR', is the total
number of input records read so far from all data files.  It starts at
zero, but is never automatically reset to zero.

   Records are separated by a character called the "record separator".
By default, the record separator is the newline character.  This is why
records are, by default, single lines.  A different character can be
used for the record separator by assigning the character to the
built-in variable `RS'.

   Like any other variable, the value of `RS' can be changed in the
`awk' program with the assignment operator, `=' (*note Assignment
Expressions: Assignment Ops.).  The new record-separator character
should be enclosed in quotation marks, which indicate a string
constant.  Often the right time to do this is at the beginning of
execution, before any input is processed, so that the very first record
is read with the proper separator.  To do this, use the special `BEGIN'
pattern (*note The `BEGIN' and `END' Special Patterns: BEGIN/END.).
For example:

     awk 'BEGIN { RS = "/" }
          { print $0 }' BBS-list

changes the value of `RS' to `"/"', before reading any input.  This is
a string whose first character is a slash; as a result, records are
separated by slashes.  Then the input file is read, and the second rule
in the `awk' program (the action with no pattern) prints each record.
Because each `print' statement adds a newline at the end of its output,
this `awk' program copies the input with each slash changed to a
newline.  Here are the results of running the program on `BBS-list':

     $ awk 'BEGIN { RS = "/" }
     >      { print $0 }' BBS-list
     -| aardvark     555-5553     1200
     -| 300          B
     -| alpo-net     555-3412     2400
     -| 1200
     -| 300     A
     -| barfly       555-7685     1200
     -| 300          A
     -| bites        555-1675     2400
     -| 1200
     -| 300     A
     -| camelot      555-0542     300               C
     -| core         555-2912     1200
     -| 300          C
     -| fooey        555-1234     2400
     -| 1200
     -| 300     B
     -| foot         555-6699     1200
     -| 300          B
     -| macfoo       555-6480     1200
     -| 300          A
     -| sdace        555-3430     2400
     -| 1200
     -| 300     A
     -| sabafoo      555-2127     1200
     -| 300          C
     -|

Note that the entry for the `camelot' BBS is not split.  In the
original data file (*note Data Files for the Examples: Sample Data
Files.), the line looks like this:

     camelot      555-0542     300               C

It has one baud rate only, so there are no slashes in the record,
unlike the others which have two or more baud rates.  In fact, this
record is treated as part of the record for the `core' BBS; the newline
separating them in the output is the original newline in the data file,
not the one added by `awk' when it printed the record!

   Another way to change the record separator is on the command line,
using the variable-assignment feature (*note Other Command-Line
Arguments: Other Arguments.):

     awk '{ print $0 }' RS="/" BBS-list

This sets `RS' to `/' before processing `BBS-list'.

   Using an unusual character such as `/' for the record separator
produces correct behavior in the vast majority of cases.  However, the
following (extreme) pipeline prints a surprising `1':

     $ echo | awk 'BEGIN { RS = "a" } ; { print NF }'
     -| 1

   There is one field, consisting of a newline.  The value of the
built-in variable `NF' is the number of fields in the current record.

   Reaching the end of an input file terminates the current input
record, even if the last character in the file is not the character in
`RS'.  (d.c.)

   The empty string `""' (a string without any characters) has a
special meaning as the value of `RS'. It means that records are
separated by one or more blank lines and nothing else.  *Note
Multiple-Line Records: Multiple Line, for more details.

   If you change the value of `RS' in the middle of an `awk' run, the
new value is used to delimit subsequent records, but the record
currently being processed, as well as records already processed, are not
affected.

   After the end of the record has been determined, `gawk' sets the
variable `RT' to the text in the input that matched `RS'.  When using
`gawk', the value of `RS' is not limited to a one-character string.  It
can be any regular expression (*note Regular Expressions: Regexp.).  In
general, each record ends at the next string that matches the regular
expression; the next record starts at the end of the matching string.
This general rule is actually at work in the usual case, where `RS'
contains just a newline: a record ends at the beginning of the next
matching string (the next newline in the input), and the following
record starts just after the end of this string (at the first character
of the following line).  The newline, because it matches `RS', is not
part of either record.

   When `RS' is a single character, `RT' contains the same single
character. However, when `RS' is a regular expression, `RT' contains
the actual input text that matched the regular expression.

   The following example illustrates both of these features.  It sets
`RS' equal to a regular expression that matches either a newline or a
series of one or more uppercase letters with optional leading and/or
trailing whitespace:

     $ echo record 1 AAAA record 2 BBBB record 3 |
     > gawk 'BEGIN { RS = "\n|( *[[:upper:]]+ *)" }
     >             { print "Record =", $0, "and RT =", RT }'
     -| Record = record 1 and RT =  AAAA
     -| Record = record 2 and RT =  BBBB
     -| Record = record 3 and RT =
     -|

The final line of output has an extra blank line. This is because the
value of `RT' is a newline, and the `print' statement supplies its own
terminating newline.  *Note A Simple Stream Editor: Simple Sed, for a
more useful example of `RS' as a regexp and `RT'.

   The use of `RS' as a regular expression and the `RT' variable are
`gawk' extensions; they are not available in compatibility mode (*note
Command-Line Options: Options.).  In compatibility mode, only the first
character of the value of `RS' is used to determine the end of the
record.

Advanced Notes: `RS = "\0"' Is Not Portable
-------------------------------------------

   There are times when you might want to treat an entire data file as a
single record.  The only way to make this happen is to give `RS' a
value that you know doesn't occur in the input file.  This is hard to
do in a general way, such that a program always works for arbitrary
input files.

   You might think that for text files, the NUL character, which
consists of a character with all bits equal to zero, is a good value to
use for `RS' in this case:

     BEGIN { RS = "\0" }  # whole file becomes one record?

   `gawk' in fact accepts this, and uses the NUL character for the
record separator.  However, this usage is _not_ portable to other `awk'
implementations.

   All other `awk' implementations(1) store strings internally as
C-style strings.  C strings use the NUL character as the string
terminator.  In effect, this means that `RS = "\0"' is the same as `RS
= ""'.  (d.c.)

   The best way to treat a whole file as a single record is to simply
read the file in, one record at a time, concatenating each record onto
the end of the previous ones.

   ---------- Footnotes ----------

   (1) At least that we know about.


File: gawk.info,  Node: Fields,  Next: Nonconstant Fields,  Prev: Records,  Up: Reading Files

Examining Fields
================

   When `awk' reads an input record, the record is automatically
"parsed" or separated by the interpreter into chunks called "fields".
By default, fields are separated by "whitespace", like words in a line.
Whitespace in `awk' means any string of one or more spaces, tabs, or
newlines;(1) other characters, such as formfeed, vertical tab, etc.
that are considered whitespace by other languages, are _not_ considered
whitespace by `awk'.

   The purpose of fields is to make it more convenient for you to refer
to these pieces of the record.  You don't have to use them--you can
operate on the whole record if you want--but fields are what make
simple `awk' programs so powerful.

   A dollar-sign (`$') is used to refer to a field in an `awk' program,
followed by the number of the field you want.  Thus, `$1' refers to the
first field, `$2' to the second, and so on.  (Unlike the Unix shells,
the field numbers are not limited to single digits.  `$127' is the one
hundred twenty-seventh field in the record.)  For example, suppose the
following is a line of input:

     This seems like a pretty nice example.

Here the first field, or `$1', is `This', the second field, or `$2', is
`seems', and so on.  Note that the last field, `$7', is `example.'.
Because there is no space between the `e' and the `.', the period is
considered part of the seventh field.

   `NF' is a built-in variable whose value is the number of fields in
the current record.  `awk' automatically updates the value of `NF' each
time it reads a record.  No matter how many fields there are, the last
field in a record can be represented by `$NF'.  So, `$NF' is the same
as `$7', which is `example.'.  If you try to reference a field beyond
the last one (such as `$8' when the record has only seven fields), you
get the empty string.  (If used in a numeric operation, you get zero.)

   The use of `$0', which looks like a reference to the "zero-th"
field, is a special case: it represents the whole input record when you
are not interested in specific fields.  Here are some more examples:

     $ awk '$1 ~ /foo/ { print $0 }' BBS-list
     -| fooey        555-1234     2400/1200/300     B
     -| foot         555-6699     1200/300          B
     -| macfoo       555-6480     1200/300          A
     -| sabafoo      555-2127     1200/300          C

This example prints each record in the file `BBS-list' whose first
field contains the string `foo'.  The operator `~' is called a
"matching operator" (*note How to Use Regular Expressions: Regexp
Usage.); it tests whether a string (here, the field `$1') matches a
given regular expression.

   By contrast, the following example looks for `foo' in _the entire
record_ and prints the first field and the last field for each matching
input record:

     $ awk '/foo/ { print $1, $NF }' BBS-list
     -| fooey B
     -| foot B
     -| macfoo A
     -| sabafoo C

   ---------- Footnotes ----------

   (1) In POSIX `awk', newlines are not considered whitespace for
separating fields.


File: gawk.info,  Node: Nonconstant Fields,  Next: Changing Fields,  Prev: Fields,  Up: Reading Files

Nonconstant Field Numbers
=========================

   The number of a field does not need to be a constant.  Any
expression in the `awk' language can be used after a `$' to refer to a
field.  The value of the expression specifies the field number.  If the
value is a string, rather than a number, it is converted to a number.
Consider this example:

     awk '{ print $NR }'

Recall that `NR' is the number of records read so far: one in the first
record, two in the second, etc.  So this example prints the first field
of the first record, the second field of the second record, and so on.
For the twentieth record, field number 20 is printed; most likely, the
record has fewer than 20 fields, so this prints a blank line.  Here is
another example of using expressions as field numbers:

     awk '{ print $(2*2) }' BBS-list

   `awk' evaluates the expression `(2*2)' and uses its value as the
number of the field to print.  The `*' sign represents multiplication,
so the expression `2*2' evaluates to four.  The parentheses are used so
that the multiplication is done before the `$' operation; they are
necessary whenever there is a binary operator in the field-number
expression.  This example, then, prints the hours of operation (the
fourth field) for every line of the file `BBS-list'.  (All of the `awk'
operators are listed, in order of decreasing precedence, in *Note
Operator Precedence (How Operators Nest): Precedence.)

   If the field number you compute is zero, you get the entire record.
Thus, `$(2-2)' has the same value as `$0'.  Negative field numbers are
not allowed; trying to reference one usually terminates the program.
(The POSIX standard does not define what happens when you reference a
negative field number.  `gawk' notices this and terminates your
program.  Other `awk' implementations may behave differently.)

   As mentioned in *Note Examining Fields: Fields, `awk' stores the
current record's number of fields in the built-in variable `NF' (also
*note Built-in Variables::).  The expression `$NF' is not a special
feature--it is the direct consequence of evaluating `NF' and using its
value as a field number.


File: gawk.info,  Node: Changing Fields,  Next: Field Separators,  Prev: Nonconstant Fields,  Up: Reading Files

Changing the Contents of a Field
================================

   The contents of a field, as seen by `awk', can be changed within an
`awk' program; this changes what `awk' perceives as the current input
record.  (The actual input is untouched; `awk' _never_ modifies the
input file.)  Consider the following example and its output:

     $ awk '{ nboxes = $3 ; $3 = $3 - 10
     >        print nboxes, $3 }' inventory-shipped
     -| 13 3
     -| 15 5
     -| 15 5
     ...

The program first saves the original value of field three in the
variable `nboxes'.  The `-' sign represents subtraction, so this
program reassigns field three, `$3', as the original value of field
three minus ten: `$3 - 10'.  (*Note Arithmetic Operators: Arithmetic
Ops.)  Then it prints the original and new values for field three.
(Someone in the warehouse made a consistent mistake while inventorying
the red boxes.)

   For this to work, the text in field `$2' must make sense as a
number; the string of characters must be converted to a number for the
computer to do arithmetic on it.  The number resulting from the
subtraction is converted back to a string of characters that then
becomes field three.  *Note Conversion of Strings and Numbers:
Conversion.

   When the value of a field is changed (as perceived by `awk'), the
text of the input record is recalculated to contain the new field where
the old one was.  In other words, `$0' changes to reflect the altered
field.  Thus, this program prints a copy of the input file, with 10
subtracted from the second field of each line:

     $ awk '{ $2 = $2 - 10; print $0 }' inventory-shipped
     -| Jan 3 25 15 115
     -| Feb 5 32 24 226
     -| Mar 5 24 34 228
     ...

   It is also possible to also assign contents to fields that are out
of range.  For example:

     $ awk '{ $6 = ($5 + $4 + $3 + $2)
     >        print $6 }' inventory-shipped
     -| 168
     -| 297
     -| 301
     ...

We've just created `$6', whose value is the sum of fields `$2', `$3',
`$4', and `$5'.  The `+' sign represents addition.  For the file
`inventory-shipped', `$6' represents the total number of parcels
shipped for a particular month.

   Creating a new field changes `awk''s internal copy of the current
input record, which is the value of `$0'.  Thus, if you do `print $0'
after adding a field, the record printed includes the new field, with
the appropriate number of field separators between it and the previously
existing fields.

   This recomputation affects and is affected by `NF' (the number of
fields; *note Examining Fields: Fields.).  It is also affected by a
feature that has not been discussed yet: the "output field separator",
`OFS', used to separate the fields (*note Output Separators::).  For
example, the value of `NF' is set to the number of the highest field
you create.

   Note, however, that merely _referencing_ an out-of-range field does
_not_ change the value of either `$0' or `NF'.  Referencing an
out-of-range field only produces an empty string.  For example:

     if ($(NF+1) != "")
         print "can't happen"
     else
         print "everything is normal"

should print `everything is normal', because `NF+1' is certain to be
out of range.  (*Note The `if'-`else' Statement: If Statement, for more
information about `awk''s `if-else' statements.  *Note Variable Typing
and Comparison Expressions: Typing and Comparison, for more information
about the `!=' operator.)

   It is important to note that making an assignment to an existing
field changes the value of `$0' but does not change the value of `NF',
even when you assign the empty string to a field.  For example:

     $ echo a b c d | awk '{ OFS = ":"; $2 = ""
     >                       print $0; print NF }'
     -| a::c:d
     -| 4

The field is still there; it just has an empty value, denoted by the
two colons between `a' and `c'.  This example shows what happens if you
create a new field:

     $ echo a b c d | awk '{ OFS = ":"; $2 = ""; $6 = "new"
     >                       print $0; print NF }'
     -| a::c:d::new
     -| 6

The intervening field, `$5', is created with an empty value (indicated
by the second pair of adjacent colons), and `NF' is updated with the
value six.

   Decrementing `NF' throws away the values of the fields after the new
value of `NF' and recomputes `$0'.  (d.c.)  Here is an example:

     $ echo a b c d e f | awk '{ print "NF =", NF;
     >                            NF = 3; print $0 }'
     -| NF = 6
     -| a b c

   *Caution:* Some versions of `awk' don't rebuild `$0' when `NF' is
decremented. Caveat emptor.


File: gawk.info,  Node: Field Separators,  Next: Constant Size,  Prev: Changing Fields,  Up: Reading Files

Specifying How Fields Are Separated
===================================

* Menu:

* Regexp Field Splitting::       Using regexps as the field separator.
* Single Character Fields::      Making each character a separate field.
* Command Line Field Separator:: Setting `FS' from the command-line.
* Field Splitting Summary::      Some final points and a summary table.

   The "field separator", which is either a single character or a
regular expression, controls the way `awk' splits an input record into
fields.  `awk' scans the input record for character sequences that
match the separator; the fields themselves are the text between the
matches.

   In the examples that follow, we use the bullet symbol (*) to
represent spaces in the output.  If the field separator is `oo', then
the following line:

     moo goo gai pan

is split into three fields: `m', `*g', and `*gai*pan'.  Note the
leading spaces in the values of the second and third fields.

   The field separator is represented by the built-in variable `FS'.
Shell programmers take note:  `awk' does _not_ use the name `IFS' that
is used by the POSIX-compliant shells (such as the Unix Bourne shell,
`sh', or `bash').

   The value of `FS' can be changed in the `awk' program with the
assignment operator, `=' (*note Assignment Expressions: Assignment
Ops.).  Often the right time to do this is at the beginning of execution
before any input has been processed, so that the very first record is
read with the proper separator.  To do this, use the special `BEGIN'
pattern (*note The `BEGIN' and `END' Special Patterns: BEGIN/END.).
For example, here we set the value of `FS' to the string `","':

     awk 'BEGIN { FS = "," } ; { print $2 }'

Given the input line:

     John Q. Smith, 29 Oak St., Walamazoo, MI 42139

this `awk' program extracts and prints the string `*29*Oak*St.'.

   Sometimes the input data contains separator characters that don't
separate fields the way you thought they would.  For instance, the
person's name in the example we just used might have a title or suffix
attached, such as:

     John Q. Smith, LXIX, 29 Oak St., Walamazoo, MI 42139

The same program would extract `*LXIX', instead of `*29*Oak*St.'.  If
you were expecting the program to print the address, you would be
surprised.  The moral is to choose your data layout and separator
characters carefully to prevent such problems.  (If the data is not in
a form that is easy to process, perhaps you can massage it first with a
separate `awk' program.)

   Fields are normally separated by whitespace sequences (spaces, tabs,
and newlines), not by single spaces.  Two spaces in a row do not
delimit an empty field.  The default value of the field separator `FS'
is a string containing a single space, `" "'.  If `awk' interpreted
this value in the usual way, each space character would separate
fields, so two spaces in a row would make an empty field between them.
The reason this does not happen is that a single space as the value of
`FS' is a special case--it is taken to specify the default manner of
delimiting fields.

   If `FS' is any other single character, such as `","', then each
occurrence of that character separates two fields.  Two consecutive
occurrences delimit an empty field.  If the character occurs at the
beginning or the end of the line, that too delimits an empty field.  The
space character is the only single character that does not follow these
rules.


File: gawk.info,  Node: Regexp Field Splitting,  Next: Single Character Fields,  Prev: Field Separators,  Up: Field Separators

Using Regular Expressions to Separate Fields
--------------------------------------------

   The previous node discussed the use of single characters or simple
strings as the value of `FS'.  More generally, the value of `FS' may be
a string containing any regular expression.  In this case, each match
in the record for the regular expression separates fields.  For
example, the assignment:

     FS = ", \t"

makes every area of an input line that consists of a comma followed by a
space and a TAB into a field separator.  (`\t' is an "escape sequence"
that stands for a TAB; *note Escape Sequences::, for the complete list
of similar escape sequences.)

   For a less trivial example of a regular expression, try using single
spaces to separate fields the way single commas are used.  `FS' can be
set to `"[ ]"' (left bracket, space, right bracket).  This regular
expression matches a single space and nothing else (*note Regular
Expressions: Regexp.).

   There is an important difference between the two cases of `FS = " "'
(a single space) and `FS = "[ \t\n]+"' (a regular expression matching
one or more spaces, tabs, or newlines).  For both values of `FS',
fields are separated by "runs" (multiple adjacent occurrences) of
spaces, tabs, and/or newlines.  However, when the value of `FS' is
`" "', `awk' first strips leading and trailing whitespace from the
record and then decides where the fields are.  For example, the
following pipeline prints `b':

     $ echo ' a b c d ' | awk '{ print $2 }'
     -| b

However, this pipeline prints `a' (note the extra spaces around each
letter):

     $ echo ' a  b  c  d ' | awk 'BEGIN { FS = "[ \t\n]+" }
     >                                  { print $2 }'
     -| a

In this case, the first field is "null" or empty.

   The stripping of leading and trailing whitespace also comes into
play whenever `$0' is recomputed.  For instance, study this pipeline:

     $ echo '   a b c d' | awk '{ print; $2 = $2; print }'
     -|    a b c d
     -| a b c d

The first `print' statement prints the record as it was read, with
leading whitespace intact.  The assignment to `$2' rebuilds `$0' by
concatenating `$1' through `$NF' together, separated by the value of
`OFS'.  Because the leading whitespace was ignored when finding `$1',
it is not part of the new `$0'.  Finally, the last `print' statement
prints the new `$0'.


File: gawk.info,  Node: Single Character Fields,  Next: Command Line Field Separator,  Prev: Regexp Field Splitting,  Up: Field Separators

Making Each Character a Separate Field
--------------------------------------

   There are times when you may want to examine each character of a
record separately.  This can be done in `gawk' by simply assigning the
null string (`""') to `FS'. In this case, each individual character in
the record becomes a separate field.  For example:

     $ echo a b | gawk 'BEGIN { FS = "" }
     >                  {
     >                      for (i = 1; i <= NF; i = i + 1)
     >                          print "Field", i, "is", $i
     >                  }'
     -| Field 1 is a
     -| Field 2 is
     -| Field 3 is b

   Traditionally, the behavior of `FS' equal to `""' was not defined.
In this case, most versions of Unix `awk' simply treat the entire record
as only having one field.  (d.c.)  In compatibility mode (*note
Command-Line Options: Options.), if `FS' is the null string, then
`gawk' also behaves this way.


File: gawk.info,  Node: Command Line Field Separator,  Next: Field Splitting Summary,  Prev: Single Character Fields,  Up: Field Separators

Setting `FS' from the Command Line
----------------------------------

   `FS' can be set on the command line.  Use the `-F' option to do so.
For example:

     awk -F, 'PROGRAM' INPUT-FILES

sets `FS' to the `,' character.  Notice that the option uses an
uppercase `F' instead of a lowercase `f'. The latter option (`-f')
specifies a file containing an `awk' program.  Case is significant in
command-line options: the `-F' and `-f' options have nothing to do with
each other.  You can use both options at the same time to set the `FS'
variable _and_ get an `awk' program from a file.

   The value used for the argument to `-F' is processed in exactly the
same way as assignments to the built-in variable `FS'.  Any special
characters in the field separator must be escaped appropriately.  For
example, to use a `\' as the field separator on the command line, you
would have to type:

     # same as FS = "\\"
     awk -F\\\\ '...' files ...

Because `\' is used for quoting in the shell, `awk' sees `-F\\'.  Then
`awk' processes the `\\' for escape characters (*note Escape
Sequences::), finally yielding a single `\' to use for the field
separator.

   As a special case, in compatibility mode (*note Command-Line
Options: Options.), if the argument to `-F' is `t', then `FS' is set to
the TAB character.  If you type `-F\t' at the shell, without any
quotes, the `\' gets deleted, so `awk' figures that you really want
your fields to be separated with tabs and not `t's.  Use `-v FS="t"' or
`-F"[t]"' on the command line if you really do want to separate your
fields with `t's.

   For example, let's use an `awk' program file called `baud.awk' that
contains the pattern `/300/' and the action `print $1':

     /300/   { print $1 }

   Let's also set `FS' to be the `-' character and run the program on
the file `BBS-list'.  The following command prints a list of the names
of the bulletin boards that operate at 300 baud and the first three
digits of their phone numbers:

     $ awk -F- -f baud.awk BBS-list
     -| aardvark     555
     -| alpo
     -| barfly       555
     -| bites        555
     -| camelot      555
     -| core         555
     -| fooey        555
     -| foot         555
     -| macfoo       555
     -| sdace        555
     -| sabafoo      555

Note the second line of output.  The second line in the original file
looked like this:

     alpo-net     555-3412     2400/1200/300     A

   The `-' as part of the system's name was used as the field
separator, instead of the `-' in the phone number that was originally
intended.  This demonstrates why you have to be careful in choosing
your field and record separators.

   Perhaps the most common use of a single character as the field
separator occurs when processing the Unix system password file.  On
many Unix systems, each user has a separate entry in the system password
file, one line per user.  The information in these lines is separated
by colons.  The first field is the user's logon name and the second is
the user's (encrypted or shadow) password.  A password file entry might
look like this:

     arnold:xyzzy:2076:10:Arnold Robbins:/home/arnold:/bin/bash

   The following program searches the system password file and prints
the entries for users who have no password:

     awk -F: '$2 == ""' /etc/passwd


File: gawk.info,  Node: Field Splitting Summary,  Prev: Command Line Field Separator,  Up: Field Separators

Field-Splitting Summary
-----------------------

   The following table summarizes how fields are split, based on the
value of `FS' (`==' means "is equal to"):

`FS == " "'
     Fields are separated by runs of whitespace.  Leading and trailing
     whitespace are ignored.  This is the default.

`FS == ANY OTHER SINGLE CHARACTER'
     Fields are separated by each occurrence of the character.  Multiple
     successive occurrences delimit empty fields, as do leading and
     trailing occurrences.  The character can even be a regexp
     metacharacter; it does not need to be escaped.

`FS == REGEXP'
     Fields are separated by occurrences of characters that match
     REGEXP.  Leading and trailing matches of REGEXP delimit empty
     fields.

`FS == ""'
     Each individual character in the record becomes a separate field.
     (This is a `gawk' extension; it is not specified by the POSIX
     standard.)

Advanced Notes: Changing `FS' Does Not Affect the Fields
--------------------------------------------------------

   According to the POSIX standard, `awk' is supposed to behave as if
each record is split into fields at the time it is read.  In
particular, this means that if you change the value of `FS' after a
record is read, the value of the fields (i.e., how they were split)
should reflect the old value of `FS', not the new one.

   However, many implementations of `awk' do not work this way.
Instead, they defer splitting the fields until a field is actually
referenced.  The fields are split using the _current_ value of `FS'!
(d.c.)  This behavior can be difficult to diagnose. The following
example illustrates the difference between the two methods.  (The
`sed'(1) command prints just the first line of `/etc/passwd'.)

     sed 1q /etc/passwd | awk '{ FS = ":" ; print $1 }'

which usually prints:

     root

on an incorrect implementation of `awk', while `gawk' prints something
like:

     root:nSijPlPhZZwgE:0:0:Root:/:

   ---------- Footnotes ----------

   (1) The `sed' utility is a "stream editor."  Its behavior is also
defined by the POSIX standard.


File: gawk.info,  Node: Constant Size,  Next: Multiple Line,  Prev: Field Separators,  Up: Reading Files

Reading Fixed-Width Data
========================

   (This minor node discusses an advanced feature of `awk'.  If you are
a novice `awk' user, you might want to skip it on the first reading.)

   `gawk' version 2.13 introduced a facility for dealing with
fixed-width fields with no distinctive field separator.  For example,
data of this nature arises in the input for old Fortran programs where
numbers are run together, or in the output of programs that did not
anticipate the use of their output as input for other programs.

   An example of the latter is a table where all the columns are lined
up by the use of a variable number of spaces and _empty fields are just
spaces_.  Clearly, `awk''s normal field splitting based on `FS' does
not work well in this case.  Although a portable `awk' program can use
a series of `substr' calls on `$0' (*note String Manipulation
Functions: String Functions.), this is awkward and inefficient for a
large number of fields.

   The splitting of an input record into fixed-width fields is
specified by assigning a string containing space-separated numbers to
the built-in variable `FIELDWIDTHS'.  Each number specifies the width
of the field, _including_ columns between fields.  If you want to
ignore the columns between fields, you can specify the width as a
separate field that is subsequently ignored.  It is a fatal error to
supply a field width that is not a positive number.  The following data
is the output of the Unix `w' utility.  It is useful to illustrate the
use of `FIELDWIDTHS':

      10:06pm  up 21 days, 14:04,  23 users
     User     tty       login  idle   JCPU   PCPU  what
     hzuo     ttyV0     8:58pm            9      5  vi p24.tex
     hzang    ttyV3     6:37pm    50                -csh
     eklye    ttyV5     9:53pm            7      1  em thes.tex
     dportein ttyV6     8:17pm  1:47                -csh
     gierd    ttyD3    10:00pm     1                elm
     dave     ttyD4     9:47pm            4      4  w
     brent    ttyp0    26Jun91  4:46  26:46   4:41  bash
     dave     ttyq4    26Jun9115days     46     46  wnewmail

   The following program takes the above input, converts the idle time
to number of seconds, and prints out the first two fields and the
calculated idle time:

   *Note:* This program uses a number of `awk' features that haven't
been introduced yet.

     BEGIN  { FIELDWIDTHS = "9 6 10 6 7 7 35" }
     NR > 2 {
         idle = $4
         sub(/^  */, "", idle)   # strip leading spaces
         if (idle == "")
             idle = 0
         if (idle ~ /:/) {
             split(idle, t, ":")
             idle = t[1] * 60 + t[2]
         }
         if (idle ~ /days/)
             idle *= 24 * 60 * 60
     
         print $1, $2, idle
     }

   Running the program on the data produces the following results:

     hzuo      ttyV0  0
     hzang     ttyV3  50
     eklye     ttyV5  0
     dportein  ttyV6  107
     gierd     ttyD3  1
     dave      ttyD4  0
     brent     ttyp0  286
     dave      ttyq4  1296000

   Another (possibly more practical) example of fixed-width input data
is the input from a deck of balloting cards.  In some parts of the
United States, voters mark their choices by punching holes in computer
cards.  These cards are then processed to count the votes for any
particular candidate or on any particular issue.  Because a voter may
choose not to vote on some issue, any column on the card may be empty.
An `awk' program for processing such data could use the `FIELDWIDTHS'
feature to simplify reading the data.  (Of course, getting `gawk' to
run on a system with card readers is another story!)

   Assigning a value to `FS' causes `gawk' to use `FS' for field
splitting again.  Use `FS = FS' to make this happen, without having to
know the current value of `FS'.  In order to tell which kind of field
splitting is in effect, use `PROCINFO["FS"]' (*note Built-in Variables
That Convey Information: Auto-set.).  The value is `"FS"' if regular
field splitting is being used, or it is `"FIELDWIDTHS"' if fixed-width
field splitting is being used:

     if (PROCINFO["FS"] == "FS")
         REGULAR FIELD SPLITTING ...
     else
         FIXED-WIDTH FIELD SPLITTING ...

   This information is useful when writing a function that needs to
temporarily change `FS' or `FIELDWIDTHS', read some records, and then
restore the original settings (*note Reading the User Database: Passwd
Functions., for an example of such a function).


File: gawk.info,  Node: Multiple Line,  Next: Getline,  Prev: Constant Size,  Up: Reading Files

Multiple-Line Records
=====================

   In some databases, a single line cannot conveniently hold all the
information in one entry.  In such cases, you can use multiline
records.  The first step in doing this is to choose your data format.

   One technique is to use an unusual character or string to separate
records.  For example, you could use the formfeed character (written
`\f' in `awk', as in C) to separate them, making each record a page of
the file.  To do this, just set the variable `RS' to `"\f"' (a string
containing the formfeed character).  Any other character could equally
well be used, as long as it won't be part of the data in a record.

   Another technique is to have blank lines separate records.  By a
special dispensation, an empty string as the value of `RS' indicates
that records are separated by one or more blank lines.  When `RS' is set
to the empty string, each record always ends at the first blank line
encountered.  The next record doesn't start until the first nonblank
line that follows.  No matter how many blank lines appear in a row, they
all act as one record separator.  (Blank lines must be completely
empty; lines that contain only whitespace do not count.)

   You can achieve the same effect as `RS = ""' by assigning the string
`"\n\n+"' to `RS'. This regexp matches the newline at the end of the
record and one or more blank lines after the record.  In addition, a
regular expression always matches the longest possible sequence when
there is a choice (*note How Much Text Matches?: Leftmost Longest.).
So the next record doesn't start until the first nonblank line that
follows--no matter how many blank lines appear in a row, they are
considered one record separator.

   There is an important difference between `RS = ""' and `RS =
"\n\n+"'. In the first case, leading newlines in the input data file
are ignored, and if a file ends without extra blank lines after the
last record, the final newline is removed from the record.  In the
second case, this special processing is not done.  (d.c.)

   Now that the input is separated into records, the second step is to
separate the fields in the record.  One way to do this is to divide each
of the lines into fields in the normal manner.  This happens by default
as the result of a special feature.  When `RS' is set to the empty
string, the newline character _always_ acts as a field separator.  This
is in addition to whatever field separations result from `FS'.

   The original motivation for this special exception was probably to
provide useful behavior in the default case (i.e., `FS' is equal to
`" "').  This feature can be a problem if you really don't want the
newline character to separate fields, because there is no way to
prevent it.  However, you can work around this by using the `split'
function to break up the record manually (*note String Manipulation
Functions: String Functions.).

   Another way to separate fields is to put each field on a separate
line: to do this, just set the variable `FS' to the string `"\n"'.
(This simple regular expression matches a single newline.)  A practical
example of a data file organized this way might be a mailing list,
where each entry is separated by blank lines.  Consider a mailing list
in a file named `addresses', which looks like this:

     Jane Doe
     123 Main Street
     Anywhere, SE 12345-6789
     
     John Smith
     456 Tree-lined Avenue
     Smallville, MW 98765-4321
     ...

A simple program to process this file is as follows:

     # addrs.awk --- simple mailing list program
     
     # Records are separated by blank lines.
     # Each line is one field.
     BEGIN { RS = "" ; FS = "\n" }
     
     {
           print "Name is:", $1
           print "Address is:", $2
           print "City and State are:", $3
           print ""
     }

   Running the program produces the following output:

     $ awk -f addrs.awk addresses
     -| Name is: Jane Doe
     -| Address is: 123 Main Street
     -| City and State are: Anywhere, SE 12345-6789
     -|
     -| Name is: John Smith
     -| Address is: 456 Tree-lined Avenue
     -| City and State are: Smallville, MW 98765-4321
     -|
     ...

   *Note Printing Mailing Labels: Labels Program, for a more realistic
program that deals with address lists.  The following table summarizes
how records are split, based on the value of `RS'.  (`==' means "is
equal to.")

`RS == "\n"'
     Records are separated by the newline character (`\n').  In effect,
     every line in the data file is a separate record, including blank
     lines.  This is the default.

`RS == ANY SINGLE CHARACTER'
     Records are separated by each occurrence of the character.
     Multiple successive occurrences delimit empty records.

`RS == ""'
     Records are separated by runs of blank lines.  The newline
     character always serves as a field separator, in addition to
     whatever value `FS' may have. Leading and trailing newlines in a
     file are ignored.

`RS == REGEXP'
     Records are separated by occurrences of characters that match
     REGEXP.  Leading and trailing matches of REGEXP delimit empty
     records.  (This is a `gawk' extension; it is not specified by the
     POSIX standard.)

   In all cases, `gawk' sets `RT' to the input text that matched the
value specified by `RS'.


File: gawk.info,  Node: Getline,  Prev: Multiple Line,  Up: Reading Files

Explicit Input with `getline'
=============================

   So far we have been getting our input data from `awk''s main input
stream--either the standard input (usually your terminal, sometimes the
output from another program) or from the files specified on the command
line.  The `awk' language has a special built-in command called
`getline' that can be used to read input under your explicit control.

   The `getline' command is used in several different ways and should
_not_ be used by beginners.  The examples that follow the explanation
of the `getline' command include material that has not been covered
yet.  Therefore, come back and study the `getline' command _after_ you
have reviewed the rest of this Info file and have a good knowledge of
how `awk' works.

   The `getline' command returns one if it finds a record and zero if
it encounters the end of the file.  If there is some error in getting a
record, such as a file that cannot be opened, then `getline' returns
-1.  In this case, `gawk' sets the variable `ERRNO' to a string
describing the error that occurred.

   In the following examples, COMMAND stands for a string value that
represents a shell command.

* Menu:

* Plain Getline::               Using `getline' with no arguments.
* Getline/Variable::            Using `getline' into a variable.
* Getline/File::                Using `getline' from a file.
* Getline/Variable/File::       Using `getline' into a variable from a
                                file.
* Getline/Pipe::                Using `getline' from a pipe.
* Getline/Variable/Pipe::       Using `getline' into a variable from a
                                pipe.
* Getline/Coprocess::           Using `getline' from a coprocess.
* Getline/Variable/Coprocess::  Using `getline' into a variable from a
                                coprocess.
* Getline Notes::               Important things to know about `getline'.
* Getline Summary::             Summary of `getline' Variants.


File: gawk.info,  Node: Plain Getline,  Next: Getline/Variable,  Prev: Getline,  Up: Getline

Using `getline' with No Arguments
---------------------------------

   The `getline' command can be used without arguments to read input
from the current input file.  All it does in this case is read the next
input record and split it up into fields.  This is useful if you've
finished processing the current record, but want to do some special
processing on the next record _right now_.  For example:

     {
          if ((t = index($0, "/*")) != 0) {
               # value of `tmp' will be "" if t is 1
               tmp = substr($0, 1, t - 1)
               u = index(substr($0, t + 2), "*/")
               while (u == 0) {
                    if (getline <= 0) {
                         m = "unexpected EOF or error"
                         m = (m ": " ERRNO)
                         print m > "/dev/stderr"
                         exit
                    }
                    t = -1
                    u = index($0, "*/")
               }
               # substr expression will be "" if */
               # occurred at end of line
               $0 = tmp substr($0, u + 2)
          }
          print $0
     }

   This `awk' program deletes all C-style comments (`/* ...  */') from
the input.  By replacing the `print $0' with other statements, you
could perform more complicated processing on the decommented input,
such as searching for matches of a regular expression.  (This program
has a subtle problem--it does not work if one comment ends and another
begins on the same line.)

   This form of the `getline' command sets `NF', `NR', `FNR', and the
value of `$0'.

   *Note:* The new value of `$0' is used to test the patterns of any
subsequent rules.  The original value of `$0' that triggered the rule
that executed `getline' is lost.  By contrast, the `next' statement
reads a new record but immediately begins processing it normally,
starting with the first rule in the program.  *Note The `next'
Statement: Next Statement.


File: gawk.info,  Node: Getline/Variable,  Next: Getline/File,  Prev: Plain Getline,  Up: Getline

Using `getline' into a Variable
-------------------------------

   You can use `getline VAR' to read the next record from `awk''s input
into the variable VAR.  No other processing is done.  For example,
suppose the next line is a comment or a special string, and you want to
read it without triggering any rules.  This form of `getline' allows
you to read that line and store it in a variable so that the main
read-a-line-and-check-each-rule loop of `awk' never sees it.  The
following example swaps every two lines of input:

     {
          if ((getline tmp) > 0) {
               print tmp
               print $0
          } else
               print $0
     }

It takes the following list:

     wan
     tew
     free
     phore

and produces these results:

     tew
     wan
     phore
     free

   The `getline' command used in this way sets only the variables `NR'
and `FNR' (and of course, VAR).  The record is not split into fields,
so the values of the fields (including `$0') and the value of `NF' do
not change.


File: gawk.info,  Node: Getline/File,  Next: Getline/Variable/File,  Prev: Getline/Variable,  Up: Getline

Using `getline' from a File
---------------------------

   Use `getline < FILE' to read the next record from FILE.  Here FILE
is a string-valued expression that specifies the file name.  `< FILE'
is called a "redirection" because it directs input to come from a
different place.  For example, the following program reads its input
record from the file `secondary.input' when it encounters a first field
with a value equal to 10 in the current input file:

     {
         if ($1 == 10) {
              getline < "secondary.input"
              print
         } else
              print
     }

   Because the main input stream is not used, the values of `NR' and
`FNR' are not changed. However, the record it reads is split into
fields in the normal manner, so the values of `$0' and the other fields
are changed, resulting in a new value of `NF'.

   According to POSIX, `getline < EXPRESSION' is ambiguous if
EXPRESSION contains unparenthesized operators other than `$'; for
example, `getline < dir "/" file' is ambiguous because the
concatenation operator is not parenthesized.  You should write it as
`getline < (dir "/" file)' if you want your program to be portable to
other `awk' implementations.  (It happens that `gawk' gets it right,
but you should not rely on this. Parentheses make it easier to read.)


File: gawk.info,  Node: Getline/Variable/File,  Next: Getline/Pipe,  Prev: Getline/File,  Up: Getline

Using `getline' into a Variable from a File
-------------------------------------------

   Use `getline VAR < FILE' to read input from the file FILE, and put
it in the variable VAR.  As above, FILE is a string-valued expression
that specifies the file from which to read.

   In this version of `getline', none of the built-in variables are
changed and the record is not split into fields.  The only variable
changed is VAR.  For example, the following program copies all the
input files to the output, except for records that say
`@include FILENAME'.  Such a record is replaced by the contents of the
file FILENAME:

     {
          if (NF == 2 && $1 == "@include") {
               while ((getline line < $2) > 0)
                    print line
               close($2)
          } else
               print
     }

   Note here how the name of the extra input file is not built into the
program; it is taken directly from the data, specifically from the
second field on the `@include' line.

   The `close' function is called to ensure that if two identical
`@include' lines appear in the input, the entire specified file is
included twice.  *Note Closing Input and Output Redirections: Close
Files And Pipes.

   One deficiency of this program is that it does not process nested
`@include' statements (i.e., `@include' statements in included files)
the way a true macro preprocessor would.  *Note An Easy Way to Use
Library Functions: Igawk Program, for a program that does handle nested
`@include' statements.


File: gawk.info,  Node: Getline/Pipe,  Next: Getline/Variable/Pipe,  Prev: Getline/Variable/File,  Up: Getline

Using `getline' from a Pipe
---------------------------

   The output of a command can also be piped into `getline', using
`COMMAND | getline'.  In this case, the string COMMAND is run as a
shell command and its output is piped into `awk' to be used as input.
This form of `getline' reads one record at a time from the pipe.  For
example, the following program copies its input to its output, except
for lines that begin with `@execute', which are replaced by the output
produced by running the rest of the line as a shell command:

     {
          if ($1 == "@execute") {
               tmp = substr($0, 10)
               while ((tmp | getline) > 0)
                    print
               close(tmp)
          } else
               print
     }

The `close' function is called to ensure that if two identical
`@execute' lines appear in the input, the command is run for each one.
*Note Closing Input and Output Redirections: Close Files And Pipes.
Given the input:

     foo
     bar
     baz
     @execute who
     bletch

the program might produce:

     foo
     bar
     baz
     arnold     ttyv0   Jul 13 14:22
     miriam     ttyp0   Jul 13 14:23     (murphy:0)
     bill       ttyp1   Jul 13 14:23     (murphy:0)
     bletch

Notice that this program ran the command `who' and printed the previous
result.  (If you try this program yourself, you will of course get
different results, depending upon who is logged in on your system.)

   This variation of `getline' splits the record into fields, sets the
value of `NF', and recomputes the value of `$0'.  The values of `NR'
and `FNR' are not changed.

   According to POSIX, `EXPRESSION | getline' is ambiguous if
EXPRESSION contains unparenthesized operators other than `$'--for
example, `"echo " "date" | getline' is ambiguous because the
concatenation operator is not parenthesized.  You should write it as
`("echo " "date") | getline' if you want your program to be portable to
other `awk' implementations.  (It happens that `gawk' gets it right,
but you should not rely on this. Parentheses make it easier to read,
anyway.)


File: gawk.info,  Node: Getline/Variable/Pipe,  Next: Getline/Coprocess,  Prev: Getline/Pipe,  Up: Getline

Using `getline' into a Variable from a Pipe
-------------------------------------------

   When you use `COMMAND | getline VAR', the output of COMMAND is sent
through a pipe to `getline' and into the variable VAR.  For example, the
following program reads the current date and time into the variable
`current_time', using the `date' utility, and then prints it:

     BEGIN {
          "date" | getline current_time
          close("date")
          print "Report printed on " current_time
     }

   In this version of `getline', none of the built-in variables are
changed and the record is not split into fields.

   According to POSIX, `EXPRESSION | getline VAR' is ambiguous if
EXPRESSION contains unparenthesized operators other than `$'; for
example, `"echo " "date" | getline VAR' is ambiguous because the
concatenation operator is not parenthesized. You should write it as
`("echo " "date") | getline VAR' if you want your program to be
portable to other `awk' implementations.  (It happens that `gawk' gets
it right, but you should not rely on this. Parentheses make it easier
to read, anyway.)


File: gawk.info,  Node: Getline/Coprocess,  Next: Getline/Variable/Coprocess,  Prev: Getline/Variable/Pipe,  Up: Getline

Using `getline' from a Coprocess
--------------------------------

   Input into `getline' from a pipe is a one-way operation.  The
command that is started with `COMMAND | getline' only sends data _to_
your `awk' program.

   On occasion, you might want to send data to another program for
processing and then read the results back.  `gawk' allows you start a
"coprocess", with which two-way communications are possible.  This is
done with the `|&' operator.  Typically, you write data to the
coprocess first and then read results back, as shown in the following:

     print "SOME QUERY" |& "db_server"
     "db_server" |& getline

which sends a query to `db_server' and then reads the results.

   The values of `NR' and `FNR' are not changed, because the main input
stream is not used.  However, the record is split into fields in the
normal manner, thus changing the values of `$0', of the other fields,
and of `NF'.

   Coprocesses are an advanced feature. They are discussed here only
because this is the minor node on `getline'.  *Note Two-Way
Communications with Another Process: Two-way I/O, where coprocesses are
discussed in more detail.


File: gawk.info,  Node: Getline/Variable/Coprocess,  Next: Getline Notes,  Prev: Getline/Coprocess,  Up: Getline

Using `getline' into a Variable from a Coprocess
------------------------------------------------

   When you use `COMMAND |& getline VAR', the output from the coprocess
COMMAND is sent through a two-way pipe to `getline' and into the
variable VAR.

   In this version of `getline', none of the built-in variables are
changed and the record is not split into fields.  The only variable
changed is VAR.

   Coprocesses are an advanced feature. They are discussed here only
because this is the minor node on `getline'.  *Note Two-Way
Communications with Another Process: Two-way I/O, where coprocesses are
discussed in more detail.


File: gawk.info,  Node: Getline Notes,  Next: Getline Summary,  Prev: Getline/Variable/Coprocess,  Up: Getline

Points to Remember About `getline'
----------------------------------

   Here are some miscellaneous points about `getline' that you should
bear in mind:

   * When `getline' changes the value of `$0' and `NF', `awk' does
     _not_ automatically jump to the start of the program and start
     testing the new record against every pattern.  However, the new
     record is tested against any subsequent rules.

   * Many `awk' implementations limit the number of pipelines that an
     `awk' program may have open to just one.  In `gawk', there is no
     such limit.  You can open as many pipelines (and coprocesses) as
     the underlying operating system permits.

   * An interesting side effect occurs if you use `getline' without a
     redirection inside a `BEGIN' rule. Because an unredirected
     `getline' reads from the command-line data files, the first
     `getline' command causes `awk' to set the value of `FILENAME'.
     Normally, `FILENAME' does not have a value inside `BEGIN' rules,
     because you have not yet started to process the command-line data
     files.  (d.c.)  (*Note The `BEGIN' and `END' Special Patterns:
     BEGIN/END, also *note Built-in Variables That Convey Information:
     Auto-set..)


File: gawk.info,  Node: Getline Summary,  Prev: Getline Notes,  Up: Getline

Summary of `getline' Variants
-----------------------------

   The following table summarizes the eight variants of `getline',
listing which built-in variables are set by each one.

`getline'                  Sets `$0', `NF', `FNR', and `NR'
`getline' VAR              Sets VAR, `FNR', and `NR'
`getline <' FILE           Sets `$0' and `NF'
`getline VAR < FILE'       Sets VAR
COMMAND `| getline'        Sets `$0' and `NF'
COMMAND `| getline' VAR    Sets VAR
COMMAND `|& getline'       Sets `$0' and `NF'.  This is a `gawk'
                           extension
COMMAND `|& getline' VAR   Sets VAR.  This is a `gawk' extension


File: gawk.info,  Node: Printing,  Next: Expressions,  Prev: Reading Files,  Up: Top

Printing Output
***************

   One of the most common programming actions is to "print", or output,
some or all of the input.  Use the `print' statement for simple output,
and the `printf' statement for fancier formatting.  The `print'
statement is not limited when computing _which_ values to print.
However, with two exceptions, you cannot specify _how_ to print
them--how many columns, whether to use exponential notation or not, and
so on.  (For the exceptions, *note Output Separators::, and *Note
Controlling Numeric Output with `print': OFMT.)  For printing with
specifications, you need the `printf' statement (*note Using `printf'
Statements for Fancier Printing: Printf.).

   Besides basic and formatted printing, this major node also covers
I/O redirections to files and pipes, introduces the special file names
that `gawk' processes internally, and discusses the `close' built-in
function.

* Menu:

* Print::                       The `print' statement.
* Print Examples::              Simple examples of `print' statements.
* Output Separators::           The output separators and how to change them.
* OFMT::                        Controlling Numeric Output With `print'.
* Printf::                      The `printf' statement.
* Redirection::                 How to redirect output to multiple files and
                                pipes.
* Special Files::               File name interpretation in `gawk'.
                                `gawk' allows access to inherited file
                                descriptors.
* Close Files And Pipes::       Closing Input and Output Files and Pipes.


File: gawk.info,  Node: Print,  Next: Print Examples,  Prev: Printing,  Up: Printing

The `print' Statement
=====================

   The `print' statement is used to produce output with simple,
standardized formatting.  Specify only the strings or numbers to print,
in a list separated by commas.  They are output, separated by single
spaces, followed by a newline.  The statement looks like this:

     print ITEM1, ITEM2, ...

The entire list of items may be optionally enclosed in parentheses.  The
parentheses are necessary if any of the item expressions uses the `>'
relational operator; otherwise it could be confused with a redirection
(*note Redirecting Output of `print' and `printf': Redirection.).

   The items to print can be constant strings or numbers, fields of the
current record (such as `$1'), variables, or any `awk' expression.
Numeric values are converted to strings and then printed.

   The simple statement `print' with no items is equivalent to `print
$0': it prints the entire current record.  To print a blank line, use
`print ""', where `""' is the empty string.  To print a fixed piece of
text, use a string constant, such as `"Don't Panic"', as one item.  If
you forget to use the double-quote characters, your text is taken as an
`awk' expression, and you will probably get an error.  Keep in mind
that a space is printed between any two items.


File: gawk.info,  Node: Print Examples,  Next: Output Separators,  Prev: Print,  Up: Printing

Examples of `print' Statements
==============================

   Each `print' statement makes at least one line of output.  However,
it isn't limited to only one line.  If an item value is a string that
contains a newline, the newline is output along with the rest of the
string.  A single `print' statement can make any number of lines this
way.

   The following is an example of printing a string that contains
embedded newlines (the `\n' is an escape sequence, used to represent
the newline character; *note Escape Sequences::):

     $ awk 'BEGIN { print "line one\nline two\nline three" }'
     -| line one
     -| line two
     -| line three

   The next example, which is run on the `inventory-shipped' file,
prints the first two fields of each input record, with a space between
them:

     $ awk '{ print $1, $2 }' inventory-shipped
     -| Jan 13
     -| Feb 15
     -| Mar 15
     ...

   A common mistake in using the `print' statement is to omit the comma
between two items.  This often has the effect of making the items run
together in the output, with no space.  The reason for this is that
juxtaposing two string expressions in `awk' means to concatenate them.
Here is the same program, without the comma:

     $ awk '{ print $1 $2 }' inventory-shipped
     -| Jan13
     -| Feb15
     -| Mar15
     ...

   To someone unfamiliar with the `inventory-shipped' file, neither
example's output makes much sense.  A heading line at the beginning
would make it clearer.  Let's add some headings to our table of months
(`$1') and green crates shipped (`$2').  We do this using the `BEGIN'
pattern (*note The `BEGIN' and `END' Special Patterns: BEGIN/END.)  so
that the headings are only printed once:

     awk 'BEGIN {  print "Month Crates"
                   print "----- ------" }
                {  print $1, $2 }' inventory-shipped

When run, the program prints the following:

     Month Crates
     ----- ------
     Jan 13
     Feb 15
     Mar 15
     ...

The only problem, however, is that the headings and the table data
don't line up!  We can fix this by printing some spaces between the two
fields:

     awk 'BEGIN { print "Month Crates"
                  print "----- ------" }
                { print $1, "     ", $2 }' inventory-shipped

   Lining up columns this way can get pretty complicated when there are
many columns to fix.  Counting spaces for two or three columns is
simple, but any more than this can take up a lot of time. This is why
the `printf' statement was created (*note Using `printf' Statements for
Fancier Printing: Printf.); one of its specialties is lining up columns
of data.

   *Note:* You can continue either a `print' or `printf' statement
simply by putting a newline after any comma (*note `awk' Statements
Versus Lines: Statements/Lines.).


File: gawk.info,  Node: Output Separators,  Next: OFMT,  Prev: Print Examples,  Up: Printing

Output Separators
=================

   As mentioned previously, a `print' statement contains a list of
items separated by commas.  In the output, the items are normally
separated by single spaces.  However, this doesn't need to be the case;
a single space is only the default.  Any string of characters may be
used as the "output field separator" by setting the built-in variable
`OFS'.  The initial value of this variable is the string `" "'--that
is, a single space.

   The output from an entire `print' statement is called an "output
record".  Each `print' statement outputs one output record, and then
outputs a string called the "output record separator" (or `ORS').  The
initial value of `ORS' is the string `"\n"'; i.e., a newline character.
Thus, each `print' statement normally makes a separate line.

   In order to change how output fields and records are separated,
assign new values to the variables `OFS' and `ORS'.  The usual place to
do this is in the `BEGIN' rule (*note The `BEGIN' and `END' Special
Patterns: BEGIN/END.), so that it happens before any input is
processed.  It can also be done with assignments on the command line,
before the names of the input files, or using the `-v' command-line
option (*note Command-Line Options: Options.).  The following example
prints the first and second fields of each input record, separated by a
semicolon, with a blank line added after each newline:

     $ awk 'BEGIN { OFS = ";"; ORS = "\n\n" }
     >            { print $1, $2 }' BBS-list
     -| aardvark;555-5553
     -|
     -| alpo-net;555-3412
     -|
     -| barfly;555-7685
     ...

   If the value of `ORS' does not contain a newline, the program's
output is run together on a single line.


File: gawk.info,  Node: OFMT,  Next: Printf,  Prev: Output Separators,  Up: Printing

Controlling Numeric Output with `print'
=======================================

   When the `print' statement is used to print numeric values, `awk'
internally converts the number to a string of characters and prints
that string.  `awk' uses the `sprintf' function to do this conversion
(*note String Manipulation Functions: String Functions.).  For now, it
suffices to say that the `sprintf' function accepts a "format
specification" that tells it how to format numbers (or strings), and
that there are a number of different ways in which numbers can be
formatted.  The different format specifications are discussed more
fully in *Note Format-Control Letters: Control Letters.

   The built-in variable `OFMT' contains the default format
specification that `print' uses with `sprintf' when it wants to convert
a number to a string for printing.  The default value of `OFMT' is
`"%.6g"'.  The way `print' prints numbers can be changed by supplying
different format specifications as the value of `OFMT', as shown in the
following example:

     $ awk 'BEGIN {
     >   OFMT = "%.0f"  # print numbers as integers (rounds)
     >   print 17.23, 17.54 }'
     -| 17 18

According to the POSIX standard, `awk''s behavior is undefined if
`OFMT' contains anything but a floating-point conversion specification.
(d.c.)


File: gawk.info,  Node: Printf,  Next: Redirection,  Prev: OFMT,  Up: Printing

Using `printf' Statements for Fancier Printing
==============================================

   For more precise control over the output format than what is
normally provided by `print', use `printf'.  `printf' can be used to
specify the width to use for each item, as well as various formatting
choices for numbers (such as what output base to use, whether to print
an exponent, whether to print a sign, and how many digits to print
after the decimal point).  This is done by supplying a string, called
the "format string", that controls how and where to print the other
arguments.

* Menu:

* Basic Printf::                Syntax of the `printf' statement.
* Control Letters::             Format-control letters.
* Format Modifiers::            Format-specification modifiers.
* Printf Examples::             Several examples.


File: gawk.info,  Node: Basic Printf,  Next: Control Letters,  Prev: Printf,  Up: Printf

Introduction to the `printf' Statement
--------------------------------------

   A simple `printf' statement looks like this:

     printf FORMAT, ITEM1, ITEM2, ...

The entire list of arguments may optionally be enclosed in parentheses.
The parentheses are necessary if any of the item expressions use the
`>' relational operator; otherwise, it can be confused with a
redirection (*note Redirecting Output of `print' and `printf':
Redirection.).

   The difference between `printf' and `print' is the FORMAT argument.
This is an expression whose value is taken as a string; it specifies
how to output each of the other arguments.  It is called the "format
string".

   The format string is very similar to that in the ISO C library
function `printf'.  Most of FORMAT is text to output verbatim.
Scattered among this text are "format specifiers"--one per item.  Each
format specifier says to output the next item in the argument list at
that place in the format.

   The `printf' statement does not automatically append a newline to
its output.  It outputs only what the format string specifies.  So if a
newline is needed, you must include one in the format string.  The
output separator variables `OFS' and `ORS' have no effect on `printf'
statements. For example:

     $ awk 'BEGIN {
     >    ORS = "\nOUCH!\n"; OFS = "+"
     >    msg = "Dont Panic!"
     >    printf "%s\n", msg
     > }'
     -| Dont Panic!

Here, neither the `+' nor the `OUCH' appear when the message is printed.


File: gawk.info,  Node: Control Letters,  Next: Format Modifiers,  Prev: Basic Printf,  Up: Printf

Format-Control Letters
----------------------

   A format specifier starts with the character `%' and ends with a
"format-control letter"--it tells the `printf' statement how to output
one item.  The format-control letter specifies what _kind_ of value to
print.  The rest of the format specifier is made up of optional
"modifiers" that control _how_ to print the value, such as the field
width.  Here is a list of the format-control letters:

`%c'
     This prints a number as an ASCII character; thus, `printf "%c",
     65' outputs the letter `A'. (The output for a string value is the
     first character of the string.)

`%d, %i'
     These are equivalent; they both print a decimal integer.  (The
     `%i' specification is for compatibility with ISO C.)

`%e, %E'
     These print a number in scientific (exponential) notation; for
     example:

          printf "%4.3e\n", 1950

     prints `1.950e+03', with a total of four significant figures,
     three of which follow the decimal point.  (The `4.3' represents
     two modifiers, discussed in the next node.)  `%E' uses `E' instead
     of `e' in the output.

`%f'
     This prints a number in floating-point notation.  For example:

          printf "%4.3f", 1950

     prints `1950.000', with a total of four significant figures, three
     of which follow the decimal point.  (The `4.3' represents two
     modifiers, discussed in the next node.)

`%g, %G'
     These print a number in either scientific notation or in
     floating-point notation, whichever uses fewer characters; if the
     result is printed in scientific notation, `%G' uses `E' instead of
     `e'.

`%o'
     This prints an unsigned octal integer.

`%s'
     This prints a string.

`%u'
     This prints an unsigned decimal integer.  (This format is of
     marginal use, because all numbers in `awk' are floating-point; it
     is provided primarily for compatibility with C.)

`%x, %X'
     These print an unsigned hexadecimal integer; `%X' uses the letters
     `A' through `F' instead of `a' through `f'.

`%%'
     This isn't a format-control letter, but it does have meaning--the
     sequence `%%' outputs one `%'; it does not consume an argument and
     it ignores any modifiers.

   *Note:* When using the integer format-control letters for values
that are outside the range of a C `long' integer, `gawk' switches to the
`%g' format specifier. Other versions of `awk' may print invalid values
or do something else entirely.  (d.c.)


File: gawk.info,  Node: Format Modifiers,  Next: Printf Examples,  Prev: Control Letters,  Up: Printf

Modifiers for `printf' Formats
------------------------------

   A format specification can also include "modifiers" that can control
how much of the item's value is printed, as well as how much space it
gets.  The modifiers come between the `%' and the format-control letter.
We will use the bullet symbol "*" in the following examples to represent
spaces in the output. Here are the possible modifiers, in the order in
which they may appear:

`N$'
     An integer constant followed by a `$' is a "positional specifier".
     Normally, format specifications are applied to arguments in the
     order given in the format string.  With a positional specifier,
     the format specification is applied to a specific argument,
     instead of what would be the next argument in the list.
     Positional specifiers begin counting with one. Thus:

          printf "%s %s\n", "don't", "panic"
          printf "%2$s %1$s\n", "panic", "don't"

     prints the famous friendly message twice.

     At first glance, this feature doesn't seem to be of much use.  It
     is in fact a `gawk' extension, intended for use in translating
     messages at runtime.  *Note Rearranging `printf' Arguments: Printf
     Ordering, which describes how and why to use positional specifiers.
     For now, we will not use them.

`-'
     The minus sign, used before the width modifier (see later on in
     this table), says to left-justify the argument within its
     specified width.  Normally, the argument is printed
     right-justified in the specified width.  Thus:

          printf "%-4s", "foo"

     prints `foo*'.

`SPACE'
     For numeric conversions, prefix positive values with a space and
     negative values with a minus sign.

`+'
     The plus sign, used before the width modifier (see later on in
     this table), says to always supply a sign for numeric conversions,
     even if the data to format is positive. The `+' overrides the
     space modifier.

`#'
     Use an "alternate form" for certain control letters.  For `%o',
     supply a leading zero.  For `%x' and `%X', supply a leading `0x'
     or `0X' for a nonzero result.  For `%e', `%E', and `%f', the
     result always contains a decimal point.  For `%g' and `%G',
     trailing zeros are not removed from the result.

`0'
     A leading `0' (zero) acts as a flag that indicates that output
     should be padded with zeros instead of spaces.  This applies even
     to non-numeric output formats.  (d.c.)  This flag only has an
     effect when the field width is wider than the value to print.

`WIDTH'
     This is a number specifying the desired minimum width of a field.
     Inserting any number between the `%' sign and the format-control
     character forces the field to expand to this width.  The default
     way to do this is to pad with spaces on the left.  For example:

          printf "%4s", "foo"

     prints `*foo'.

     The value of WIDTH is a minimum width, not a maximum.  If the item
     value requires more than WIDTH characters, it can be as wide as
     necessary.  Thus, the following:

          printf "%4s", "foobar"

     prints `foobar'.

     Preceding the WIDTH with a minus sign causes the output to be
     padded with spaces on the right, instead of on the left.

`.PREC'
     A period followed by an integer constant specifies the precision
     to use when printing.  The meaning of the precision varies by
     control letter:

    `%e', `%E', `%f'
          Number of digits to the right of the decimal point.

    `%g', `%G'
          Maximum number of significant digits.

    `%d', `%i', `%o', `%u', `%x', `%X'
          Minimum number of digits to print.

    `%s'
          Maximum number of characters from the string that should
          print.

     Thus, the following:

          printf "%.4s", "foobar"

     prints `foob'.

   The C library `printf''s dynamic WIDTH and PREC capability (for
example, `"%*.*s"') is supported.  Instead of supplying explicit WIDTH
and/or PREC values in the format string, they are passed in the
argument list.  For example:

     w = 5
     p = 3
     s = "abcdefg"
     printf "%*.*s\n", w, p, s

is exactly equivalent to:

     s = "abcdefg"
     printf "%5.3s\n", s

Both programs output `**abc'.  Earlier versions of `awk' did not
support this capability.  If you must use such a version, you may
simulate this feature by using concatenation to build up the format
string, like so:

     w = 5
     p = 3
     s = "abcdefg"
     printf "%" w "." p "s\n", s

This is not particularly easy to read but it does work.

   C programmers may be used to supplying additional `l', `L', and `h'
modifiers in `printf' format strings. These are not valid in `awk'.
Most `awk' implementations silently ignore these modifiers.  If
`--lint' is provided on the command line (*note Command-Line Options:
Options.), `gawk' warns about their use. If `--posix' is supplied,
their use is a fatal error.


File: gawk.info,  Node: Printf Examples,  Prev: Format Modifiers,  Up: Printf

Examples Using `printf'
-----------------------

   The following is a simple example of how to use `printf' to make an
aligned table:

     awk '{ printf "%-10s %s\n", $1, $2 }' BBS-list

This command prints the names of the bulletin boards (`$1') in the file
`BBS-list' as a string of 10 characters that are left-justified.  It
also prints the phone numbers (`$2') next on the line.  This produces
an aligned two-column table of names and phone numbers, as shown here:

     $ awk '{ printf "%-10s %s\n", $1, $2 }' BBS-list
     -| aardvark   555-5553
     -| alpo-net   555-3412
     -| barfly     555-7685
     -| bites      555-1675
     -| camelot    555-0542
     -| core       555-2912
     -| fooey      555-1234
     -| foot       555-6699
     -| macfoo     555-6480
     -| sdace      555-3430
     -| sabafoo    555-2127

   In this case, the phone numbers had to be printed as strings because
the numbers are separated by a dash.  Printing the phone numbers as
numbers would have produced just the first three digits: `555'.  This
would have been pretty confusing.

   It wasn't necessary to specify a width for the phone numbers because
they are last on their lines.  They don't need to have spaces after
them.

   The table could be made to look even nicer by adding headings to the
tops of the columns.  This is done using the `BEGIN' pattern (*note The
`BEGIN' and `END' Special Patterns: BEGIN/END.)  so that the headers
are only printed once, at the beginning of the `awk' program:

     awk 'BEGIN { print "Name      Number"
                  print "----      ------" }
          { printf "%-10s %s\n", $1, $2 }' BBS-list

   The above example mixed `print' and `printf' statements in the same
program.  Using just `printf' statements can produce the same results:

     awk 'BEGIN { printf "%-10s %s\n", "Name", "Number"
                  printf "%-10s %s\n", "----", "------" }
          { printf "%-10s %s\n", $1, $2 }' BBS-list

Printing each column heading with the same format specification used
for the column elements ensures that the headings are aligned just like
the columns.

   The fact that the same format specification is used three times can
be emphasized by storing it in a variable, like this:

     awk 'BEGIN { format = "%-10s %s\n"
                  printf format, "Name", "Number"
                  printf format, "----", "------" }
          { printf format, $1, $2 }' BBS-list

   At this point, it would be a worthwhile exercise to use the `printf'
statement to line up the headings and table data for the
`inventory-shipped' example that was covered earlier in the minor node
on the `print' statement (*note The `print' Statement: Print.).


File: gawk.info,  Node: Redirection,  Next: Special Files,  Prev: Printf,  Up: Printing

Redirecting Output of `print' and `printf'
==========================================

   So far, the output from `print' and `printf' has gone to the standard
output, usually the terminal.  Both `print' and `printf' can also send
their output to other places.  This is called "redirection".

   A redirection appears after the `print' or `printf' statement.
Redirections in `awk' are written just like redirections in shell
commands, except that they are written inside the `awk' program.

   There are four forms of output redirection: output to a file, output
appended to a file, output through a pipe to another command, and output
to a coprocess.  They are all shown for the `print' statement, but they
work identically for `printf':

`print ITEMS > OUTPUT-FILE'
     This type of redirection prints the items into the output file
     named OUTPUT-FILE.  The file name OUTPUT-FILE can be any
     expression.  Its value is changed to a string and then used as a
     file name (*note Expressions::).

     When this type of redirection is used, the OUTPUT-FILE is erased
     before the first output is written to it.  Subsequent writes to
     the same OUTPUT-FILE do not erase OUTPUT-FILE, but append to it.
     (This is different from how you use redirections in shell scripts.)
     If OUTPUT-FILE does not exist, it is created.  For example, here
     is how an `awk' program can write a list of BBS names to one file
     named `name-list', and a list of phone numbers to another file
     named `phone-list':

          $ awk '{ print $2 > "phone-list"
          >        print $1 > "name-list" }' BBS-list
          $ cat phone-list
          -| 555-5553
          -| 555-3412
          ...
          $ cat name-list
          -| aardvark
          -| alpo-net
          ...

     Each output file contains one name or number per line.

`print ITEMS >> OUTPUT-FILE'
     This type of redirection prints the items into the pre-existing
     output file named OUTPUT-FILE.  The difference between this and the
     single-`>' redirection is that the old contents (if any) of
     OUTPUT-FILE are not erased.  Instead, the `awk' output is appended
     to the file.  If OUTPUT-FILE does not exist, then it is created.

`print ITEMS | COMMAND'
     It is also possible to send output to another program through a
     pipe instead of into a file.   This type of redirection opens a
     pipe to COMMAND, and writes the values of ITEMS through this pipe
     to another process created to execute COMMAND.

     The redirection argument COMMAND is actually an `awk' expression.
     Its value is converted to a string whose contents give the shell
     command to be run.  For example, the following produces two files,
     one unsorted list of BBS names, and one list sorted in reverse
     alphabetical order:

          awk '{ print $1 > "names.unsorted"
                 command = "sort -r > names.sorted"
                 print $1 | command }' BBS-list

     The unsorted list is written with an ordinary redirection, while
     the sorted list is written by piping through the `sort' utility.

     The next example uses redirection to mail a message to the mailing
     list `bug-system'.  This might be useful when trouble is
     encountered in an `awk' script run periodically for system
     maintenance:

          report = "mail bug-system"
          print "Awk script failed:", $0 | report
          m = ("at record number " FNR " of " FILENAME)
          print m | report
          close(report)

     The message is built using string concatenation and saved in the
     variable `m'.  It's then sent down the pipeline to the `mail'
     program.  (The parentheses group the items to concatenate--see
     *Note String Concatenation: Concatenation.)

     The `close' function is called here because it's a good idea to
     close the pipe as soon as all the intended output has been sent to
     it.  *Note Closing Input and Output Redirections: Close Files And
     Pipes, for more information.

     This example also illustrates the use of a variable to represent a
     FILE or COMMAND--it is not necessary to always use a string
     constant.  Using a variable is generally a good idea, because
     `awk' requires that the string value be spelled identically every
     time.

`print ITEMS |& COMMAND'
     This type of redirection prints the items to the input of COMMAND.
     The difference between this and the single-`|' redirection is that
     the output from COMMAND can be read with `getline'.  Thus COMMAND
     is a "coprocess", which works together with, but subsidiary to,
     the `awk' program.

     This feature is a `gawk' extension, and is not available in POSIX
     `awk'.  *Note Two-Way Communications with Another Process: Two-way
     I/O, for a more complete discussion.

   Redirecting output using `>', `>>', `|', or `|&' asks the system to
open a file, pipe, or coprocess only if the particular FILE or COMMAND
you specify has not already been written to by your program or if it
has been closed since it was last written to.

   It is a common error to use `>' redirection for the first `print' to
a file, and then to use `>>' for subsequent output:

     # clear the file
     print "Don't panic" > "guide.txt"
     ...
     # append
     print "Avoid improbability generators" >> "guide.txt"

This is indeed how redirections must be used from the shell.  But in
`awk', it isn't necessary.  In this kind of case, a program should use
`>' for all the `print' statements, since the output file is only
opened once.

   Many `awk' implementations limit the number of pipelines that an
`awk' program may have open to just one!  In `gawk', there is no such
limit.  `gawk' allows a program to open as many pipelines as the
underlying operating system permits.

Advanced Notes: Piping into `sh'
--------------------------------

   A particularly powerful way to use redirection is to build command
lines and pipe them into the shell, `sh'.  For example, suppose you
have a list of files brought over from a system where all the file names
are stored in uppercase, and you wish to rename them to have names in
all lowercase.  The following program is both simple and efficient:

     { printf("mv %s %s\n", $0, tolower($0)) | "sh" }
     
     END { close("sh") }

   The `tolower' function returns its argument string with all
uppercase characters converted to lowercase (*note String Manipulation
Functions: String Functions.).  The program builds up a list of command
lines, using the `mv' utility to rename the files.  It then sends the
list to the shell for execution.


File: gawk.info,  Node: Special Files,  Next: Close Files And Pipes,  Prev: Redirection,  Up: Printing

Special File Names in `gawk'
============================

   `gawk' provides a number of special file names that it interprets
internally.  These file names provide access to standard file
descriptors, process-related information, and TCP/IP networking.

* Menu:

* Special FD::                  Special files for I/O.
* Special Process::             Special files for process information.
* Special Network::             Special files for network communications.
* Special Caveats::             Things to watch out for.


File: gawk.info,  Node: Special FD,  Next: Special Process,  Prev: Special Files,  Up: Special Files

Special Files for Standard Descriptors
--------------------------------------

   Running programs conventionally have three input and output streams
already available to them for reading and writing.  These are known as
the "standard input", "standard output", and "standard error output".
These streams are, by default, connected to your terminal, but they are
often redirected with the shell, via the `<', `<<', `>', `>>', `>&',
and `|' operators.  Standard error is typically used for writing error
messages; the reason there are two separate streams, standard output
and standard error, is so that they can be redirected separately.

   In other implementations of `awk', the only way to write an error
message to standard error in an `awk' program is as follows:

     print "Serious error detected!" | "cat 1>&2"

This works by opening a pipeline to a shell command that can access the
standard error stream that it inherits from the `awk' process.  This is
far from elegant, and it is also inefficient, because it requires a
separate process.  So people writing `awk' programs often don't do
this.  Instead, they send the error messages to the terminal, like this:

     print "Serious error detected!" > "/dev/tty"

This usually has the same effect but not always: although the standard
error stream is usually the terminal, it can be redirected; when that
happens, writing to the terminal is not correct.  In fact, if `awk' is
run from a background job, it may not have a terminal at all.  Then
opening `/dev/tty' fails.

   `gawk' provides special file names for accessing the three standard
streams, as well as any other inherited open files.  If the file name
matches one of these special names when `gawk' redirects input or
output, then it directly uses the stream that the file name stands for.
These special file names work for all operating systems that `gawk' has
been ported to, not just those that are POSIX-compliant:

`/dev/stdin'
     The standard input (file descriptor 0).

`/dev/stdout'
     The standard output (file descriptor 1).

`/dev/stderr'
     The standard error output (file descriptor 2).

`/dev/fd/N'
     The file associated with file descriptor N.  Such a file must be
     opened by the program initiating the `awk' execution (typically
     the shell).  Unless special pains are taken in the shell from which
     `gawk' is invoked, only descriptors 0, 1, and 2 are available.

   The file names `/dev/stdin', `/dev/stdout', and `/dev/stderr' are
aliases for `/dev/fd/0', `/dev/fd/1', and `/dev/fd/2', respectively.
However, they are more self-explanatory.  The proper way to write an
error message in a `gawk' program is to use `/dev/stderr', like this:

     print "Serious error detected!" > "/dev/stderr"

   Note the use of quotes around the file name.  Like any other
redirection, the value must be a string.  It is a common error to omit
the quotes, which leads to confusing results.


File: gawk.info,  Node: Special Process,  Next: Special Network,  Prev: Special FD,  Up: Special Files

Special Files for Process-Related Information
---------------------------------------------

   `gawk' also provides special file names that give access to
information about the running `gawk' process.  Each of these "files"
provides a single record of information.  To read them more than once,
they must first be closed with the `close' function (*note Closing
Input and Output Redirections: Close Files And Pipes.).  The file names
are:

`/dev/pid'
     Reading this file returns the process ID of the current process,
     in decimal form, terminated with a newline.

`/dev/ppid'
     Reading this file returns the parent process ID of the current
     process, in decimal form, terminated with a newline.

`/dev/pgrpid'
     Reading this file returns the process group ID of the current
     process, in decimal form, terminated with a newline.

`/dev/user'
     Reading this file returns a single record terminated with a
     newline.  The fields are separated with spaces.  The fields
     represent the following information:

    `$1'
          The return value of the `getuid' system call (the real user
          ID number).

    `$2'
          The return value of the `geteuid' system call (the effective
          user ID number).

    `$3'
          The return value of the `getgid' system call (the real group
          ID number).

    `$4'
          The return value of the `getegid' system call (the effective
          group ID number).

     If there are any additional fields, they are the group IDs
     returned by the `getgroups' system call.  (Multiple groups may not
     be supported on all systems.)

   These special file names may be used on the command line as data
files, as well as for I/O redirections within an `awk' program.  They
may not be used as source files with the `-f' option.

   *Note:* The special files that provide process-related information
are now considered obsolete and will disappear entirely in the next
release of `gawk'.  `gawk' prints a warning message every time you use
one of these files.  To obtain process-related information, use the
`PROCINFO' array.  *Note Built-in Variables That Convey Information:
Auto-set.


File: gawk.info,  Node: Special Network,  Next: Special Caveats,  Prev: Special Process,  Up: Special Files

Special Files for Network Communications
----------------------------------------

   Starting with version 3.1 of `gawk', `awk' programs can open a
two-way TCP/IP connection, acting as either a client or a server.  This
is done using a special file name of the form:

     `/inet/PROTOCOL/LOCAL-PORT/REMOTE-HOST/REMOTE-PORT'

   The PROTOCOL is one of `tcp', `udp', or `raw', and the other fields
represent the other essential pieces of information for making a
networking connection.  These file names are used with the `|&'
operator for communicating with a coprocess (*note Two-Way
Communications with Another Process: Two-way I/O.).  This is an
advanced feature, mentioned here only for completeness.  Full
discussion is delayed until *Note Using `gawk' for Network Programming:
TCP/IP Networking.


File: gawk.info,  Node: Special Caveats,  Prev: Special Network,  Up: Special Files

Special File Name Caveats
-------------------------

   Here is a list of things to bear in mind when using the special file
names that `gawk' provides:

   * Recognition of these special file names is disabled if `gawk' is in
     compatibility mode (*note Command-Line Options: Options.).

   * The special files that provide process-related information are now
     considered obsolete and will disappear entirely in the next
     release of `gawk'.  `gawk' prints a warning message every time you
     use one of these files.  To obtain process-related information,
     use the `PROCINFO' array.  *Note Built-in Variables::.

   * Starting with version 3.1, `gawk' _always_ interprets these
     special file names.(1) For example, using `/dev/fd/4' for output
     actually writes on file descriptor 4, and not on a new file
     descriptor that is `dup''ed from file descriptor 4.  Most of the
     time this does not matter; however, it is important to _not_ close
     any of the files related to file descriptors 0, 1, and 2.  Doing
     so results in unpredictable behavior.

   ---------- Footnotes ----------

   (1) Older versions of `gawk' would interpret these names internally
only if the system did not actually have a `/dev/fd' directory or any
of the other special files listed earlier.  Usually this didn't make a
difference, but sometimes it did; thus, it was decided to make `gawk''s
behavior consistent on all systems and to have it always interpret the
special file names itself.


File: gawk.info,  Node: Close Files And Pipes,  Prev: Special Files,  Up: Printing

Closing Input and Output Redirections
=====================================

   If the same file name or the same shell command is used with
`getline' more than once during the execution of an `awk' program
(*note Explicit Input with `getline': Getline.), the file is opened (or
the command is executed) the first time only.  At that time, the first
record of input is read from that file or command.  The next time the
same file or command is used with `getline', another record is read
from it, and so on.

   Similarly, when a file or pipe is opened for output, the file name or
command associated with it is remembered by `awk', and subsequent
writes to the same file or command are appended to the previous writes.
The file or pipe stays open until `awk' exits.

   This implies that special steps are necessary in order to read the
same file again from the beginning, or to rerun a shell command (rather
than reading more output from the same command).  The `close' function
makes these things possible:

     close(FILENAME)

or:

     close(COMMAND)

   The argument FILENAME or COMMAND can be any expression.  Its value
must _exactly_ match the string that was used to open the file or start
the command (spaces and other "irrelevant" characters included). For
example, if you open a pipe with this:

     "sort -r names" | getline foo

then you must close it with this:

     close("sort -r names")

   Once this function call is executed, the next `getline' from that
file or command, or the next `print' or `printf' to that file or
command, reopens the file or reruns the command.  Because the
expression that you use to close a file or pipeline must exactly match
the expression used to open the file or run the command, it is good
practice to use a variable to store the file name or command.  The
previous example becomes the following:

     sortcom = "sort -r names"
     sortcom | getline foo
     ...
     close(sortcom)

This helps avoid hard-to-find typographical errors in your `awk'
programs.  Here are some of the reasons for closing an output file:

   * To write a file and read it back later on in the same `awk'
     program.  Close the file after writing it, then begin reading it
     with `getline'.

   * To write numerous files, successively, in the same `awk' program.
     If the files aren't closed, eventually `awk' may exceed a system
     limit on the number of open files in one process.  It is best to
     close each one when the program has finished writing it.

   * To make a command finish.  When output is redirected through a
     pipe, the command reading the pipe normally continues to try to
     read input as long as the pipe is open.  Often this means the
     command cannot really do its work until the pipe is closed.  For
     example, if output is redirected to the `mail' program, the
     message is not actually sent until the pipe is closed.

   * To run the same program a second time, with the same arguments.
     This is not the same thing as giving more input to the first run!

     For example, suppose a program pipes output to the `mail' program.
     If it outputs several lines redirected to this pipe without closing
     it, they make a single message of several lines.  By contrast, if
     the program closes the pipe after each line of output, then each
     line makes a separate message.

   If you use more files than the system allows you to have open,
`gawk' attempts to multiplex the available open files among your data
files.  `gawk''s ability to do this depends upon the facilities of your
operating system, so it may not always work.  It is therefore both good
practice and good portability advice to always use `close' on your
files when you are done with them.  In fact, if you are using a lot of
pipes, it is essential that you close commands when done. For example,
consider something like this:

     {
         ...
         command = ("grep " $1 " /some/file | my_prog -q " $3)
         while ((command | getline) > 0) {
             PROCESS OUTPUT OF command
         }
         # need close(command) here
     }

   This example creates a new pipeline based on data in _each_ record.
Without the call to `close' indicated in the comment, `awk' creates
child processes to run the commands, until it eventually runs out of
file descriptors for more pipelines.

   Even though each command has finished (as indicated by the
end-of-file return status from `getline'), the child process is not
terminated;(1) more importantly, the file descriptor for the pipe is
not closed and released until `close' is called or `awk' exits.

   `close' will silently do nothing if given an argument that does not
represent a file, pipe or coprocess that was opened with a redirection.

   When using the `|&' operator to communicate with a coprocess, it is
occasionally useful to be able to close one end of the two-way pipe
without closing the other.  This is done by supplying a second argument
to `close'.  As in any other call to `close', the first argument is the
name of the command or special file used to start the coprocess.  The
second argument should be a string, with either of the values `"to"' or
`"from"'.  Case does not matter.  As this is an advanced feature, a
more complete discussion is delayed until *Note Two-Way Communications
with Another Process: Two-way I/O, which discusses it in more detail
and gives an example.

Advanced Notes: Using `close''s Return Value
--------------------------------------------

   In many versions of Unix `awk', the `close' function is actually a
statement.  It is a syntax error to try and use the return value from
`close': (d.c.)

     command = "..."
     command | getline info
     retval = close(command)  # syntax error in most Unix awks

   `gawk' treats `close' as a function.  The return value is -1 if the
argument names something that was never opened with a redirection, or
if there is a system problem closing the file or process.  In these
cases, `gawk' sets the built-in variable `ERRNO' to a string describing
the problem.

   In `gawk', when closing a pipe or coprocess, the return value is the
exit status of the command.  Otherwise, it is the return value from the
system's `close' or `fclose' C functions when closing input or output
files, respectively.  This value is zero if the close succeeds, or -1 if
it fails.

   The return value for closing a pipeline is particularly useful.  It
allows you to get the output from a command as well as its exit status.

   For POSIX-compliant systems, if the exit status is a number above
128, then the program was terminated by a signal.  Subtract 128 to get
the signal number:

     exit_val = close(command)
     if (exit_val > 128)
         print command, "died with signal", exit_val - 128
     else
         print command, "exited with code", exit_val

   Currently, in `gawk', this only works for commands piping into
`getline'.  For commands piped into from `print' or `printf', the
return value from `close' is that of the library's `pclose' function.

   ---------- Footnotes ----------

   (1) The technical terminology is rather morbid.  The finished child
is called a "zombie," and cleaning up after it is referred to as
"reaping."


File: gawk.info,  Node: Expressions,  Next: Patterns and Actions,  Prev: Printing,  Up: Top

Expressions
***********

   Expressions are the basic building blocks of `awk' patterns and
actions.  An expression evaluates to a value that you can print, test,
or pass to a function.  Additionally, an expression can assign a new
value to a variable or a field by using an assignment operator.

   An expression can serve as a pattern or action statement on its own.
Most other kinds of statements contain one or more expressions that
specify the data on which to operate.  As in other languages,
expressions in `awk' include variables, array references, constants,
and function calls, as well as combinations of these with various
operators.

* Menu:

* Constants::                   String, numeric and regexp constants.
* Using Constant Regexps::      When and how to use a regexp constant.
* Variables::                   Variables give names to values for later use.
* Conversion::                  The conversion of strings to numbers and vice
                                versa.
* Arithmetic Ops::              Arithmetic operations (`+', `-',
                                etc.)
* Concatenation::               Concatenating strings.
* Assignment Ops::              Changing the value of a variable or a field.
* Increment Ops::               Incrementing the numeric value of a variable.
* Truth Values::                What is ``true'' and what is ``false''.
* Typing and Comparison::       How variables acquire types and how this
                                affects comparison of numbers and strings with
                                `<', etc.
* Boolean Ops::                 Combining comparison expressions using boolean
                                operators `||' (``or''), `&&'
                                (``and'') and `!' (``not'').
* Conditional Exp::             Conditional expressions select between two
                                subexpressions under control of a third
                                subexpression.
* Function Calls::              A function call is an expression.
* Precedence::                  How various operators nest.


File: gawk.info,  Node: Constants,  Next: Using Constant Regexps,  Prev: Expressions,  Up: Expressions

Constant Expressions
====================

   The simplest type of expression is the "constant", which always has
the same value.  There are three types of constants: numeric, string,
and regular expression.

   Each is used in the appropriate context when you need a data value
that isn't going to change.  Numeric constants can have different
forms, but are stored identically internally.

* Menu:

* Scalar Constants::            Numeric and string constants.
* Nondecimal-numbers::          What are octal and hex numbers.
* Regexp Constants::            Regular Expression constants.


File: gawk.info,  Node: Scalar Constants,  Next: Nondecimal-numbers,  Prev: Constants,  Up: Constants

Numeric and String Constants
----------------------------

   A "numeric constant" stands for a number.  This number can be an
integer, a decimal fraction, or a number in scientific (exponential)
notation.(1) Here are some examples of numeric constants that all have
the same value:

     105
     1.05e+2
     1050e-1

   A string constant consists of a sequence of characters enclosed in
double-quotation marks.  For example:

     "parrot"

represents the string whose contents are `parrot'.  Strings in `gawk'
can be of any length, and they can contain any of the possible
eight-bit ASCII characters including ASCII NUL (character code zero).
Other `awk' implementations may have difficulty with some character
codes.

   ---------- Footnotes ----------

   (1) The internal representation of all numbers, including integers,
uses double-precision floating-point numbers.  On most modern systems,
these are in IEEE 754 standard format.


File: gawk.info,  Node: Nondecimal-numbers,  Next: Regexp Constants,  Prev: Scalar Constants,  Up: Constants

Octal and Hexadecimal Numbers
-----------------------------

   In `awk', all numbers are in decimal; i.e., base 10.  Many other
programming languages allow you to specify numbers in other bases, often
octal (base 8) and hexadecimal (base 16).  In octal, the numbers go 0,
1, 2, 3, 4, 5, 6, 7, 10, 11, 12, etc.  Just as `11', in decimal, is 1
times 10 plus 1, so `11', in octal, is 1 times 8, plus 1. This equals 9
in decimal.  In hexadecimal, there are 16 digits. Since the everyday
decimal number system only has ten digits (`0'-`9'), the letters `a'
through `f' are used to represent the rest.  (Case in the letters is
usually irrelevant; hexadecimal `a' and `A' have the same value.)
Thus, `11', in hexadecimal, is 1 times 16 plus 1, which equals 17 in
decimal.

   Just by looking at plain `11', you can't tell what base it's in.
So, in C, C++, and other languages derived from C, there is a special
notation to help signify the base.  Octal numbers start with a leading
`0', and hexadecimal numbers start with a leading `0x' or `0X':

`11'
     Decimal value 11.

`011'
     Octal 11, decimal value 9.

`0x11'
     Hexadecimal 11, decimal value 17.

   This example shows the difference:

     $ gawk 'BEGIN { printf "%d, %d, %d\n", 011, 11, 0x11 }'
     -| 9, 11, 17

   Being able to use octal and hexadecimal constants in your programs
is most useful when working with data that cannot be represented
conveniently as characters or as regular numbers, such as binary data
of various sorts.

   `gawk' allows the use of octal and hexadecimal constants in your
program text.  However, such numbers in the input data are not treated
differently; doing so by default would break old programs.  (If you
really need to do this, use the `--non-decimal-data' command-line
option; *note Allowing Nondecimal Input Data: Nondecimal Data..)  If
you have octal or hexadecimal data, you can use the `strtonum' function
(*note String Manipulation Functions: String Functions.)  to convert
the data into a number.  Most of the time, you will want to use octal
or hexadecimal constants when working with the built-in bit
manipulation functions; see *Note Using `gawk''s Bit Manipulation
Functions: Bitwise Functions, for more information.

   Unlike some early C implementations, `8' and `9' are not valid in
octal constants; e.g., `gawk' treats `018' as decimal 18:

     $ gawk 'BEGIN { print "021 is", 021 ; print 018 }'
     -| 021 is 17
     -| 18

   Octal and hexadecimal source code constants are a `gawk' extension.
If `gawk' is in compatibility mode (*note Command-Line Options:
Options.), they are not available.

Advanced Notes: A Constant's Base Does Not Affect Its Value
-----------------------------------------------------------

   Once a numeric constant has been converted internally into a number,
`gawk' no longer remembers what the original form of the constant was;
the internal value is always used.  This has particular consequences
for conversion of numbers to strings:

     $ gawk 'BEGIN { printf "0x11 is <%s>\n", 0x11 }'
     -| 0x11 is <17>


File: gawk.info,  Node: Regexp Constants,  Prev: Nondecimal-numbers,  Up: Constants

Regular Expression Constants
----------------------------

   A regexp constant is a regular expression description enclosed in
slashes, such as `/^beginning and end$/'.  Most regexps used in `awk'
programs are constant, but the `~' and `!~' matching operators can also
match computed or "dynamic" regexps (which are just ordinary strings or
variables that contain a regexp).


File: gawk.info,  Node: Using Constant Regexps,  Next: Variables,  Prev: Constants,  Up: Expressions

Using Regular Expression Constants
==================================

   When used on the righthand side of the `~' or `!~' operators, a
regexp constant merely stands for the regexp that is to be matched.
However, regexp constants (such as `/foo/') may be used like simple
expressions.  When a regexp constant appears by itself, it has the same
meaning as if it appeared in a pattern, i.e., `($0 ~ /foo/)' (d.c.)
*Note Expressions as Patterns: Expression Patterns.  This means that
the following two code segments:

     if ($0 ~ /barfly/ || $0 ~ /camelot/)
         print "found"

and:

     if (/barfly/ || /camelot/)
         print "found"

are exactly equivalent.  One rather bizarre consequence of this rule is
that the following Boolean expression is valid, but does not do what
the user probably intended:

     # note that /foo/ is on the left of the ~
     if (/foo/ ~ $1) print "found foo"

This code is "obviously" testing `$1' for a match against the regexp
`/foo/'.  But in fact, the expression `/foo/ ~ $1' actually means `($0
~ /foo/) ~ $1'.  In other words, first match the input record against
the regexp `/foo/'.  The result is either zero or one, depending upon
the success or failure of the match.  That result is then matched
against the first field in the record.  Because it is unlikely that you
would ever really want to make this kind of test, `gawk' issues a
warning when it sees this construct in a program.  Another consequence
of this rule is that the assignment statement:

     matches = /foo/

assigns either zero or one to the variable `matches', depending upon
the contents of the current input record.  This feature of the language
has never been well documented until the POSIX specification.

   Constant regular expressions are also used as the first argument for
the `gensub', `sub', and `gsub' functions, and as the second argument
of the `match' function (*note String Manipulation Functions: String
Functions.).  Modern implementations of `awk', including `gawk', allow
the third argument of `split' to be a regexp constant, but some older
implementations do not.  (d.c.)  This can lead to confusion when
attempting to use regexp constants as arguments to user-defined
functions (*note User-Defined Functions: User-defined.).  For example:

     function mysub(pat, repl, str, global)
     {
         if (global)
             gsub(pat, repl, str)
         else
             sub(pat, repl, str)
         return str
     }
     
     {
         ...
         text = "hi! hi yourself!"
         mysub(/hi/, "howdy", text, 1)
         ...
     }

   In this example, the programmer wants to pass a regexp constant to
the user-defined function `mysub', which in turn passes it on to either
`sub' or `gsub'.  However, what really happens is that the `pat'
parameter is either one or zero, depending upon whether or not `$0'
matches `/hi/'.  `gawk' issues a warning when it sees a regexp constant
used as a parameter to a user-defined function, since passing a truth
value in this way is probably not what was intended.


File: gawk.info,  Node: Variables,  Next: Conversion,  Prev: Using Constant Regexps,  Up: Expressions

Variables
=========

   Variables are ways of storing values at one point in your program for
use later in another part of your program.  They can be manipulated
entirely within the program text, and they can also be assigned values
on the `awk' command line.

* Menu:

* Using Variables::             Using variables in your programs.
* Assignment Options::          Setting variables on the command-line and a
                                summary of command-line syntax. This is an
                                advanced method of input.


File: gawk.info,  Node: Using Variables,  Next: Assignment Options,  Prev: Variables,  Up: Variables

Using Variables in a Program
----------------------------

   Variables let you give names to values and refer to them later.
Variables have already been used in many of the examples.  The name of
a variable must be a sequence of letters, digits, or underscores, and
it may not begin with a digit.  Case is significant in variable names;
`a' and `A' are distinct variables.

   A variable name is a valid expression by itself; it represents the
variable's current value.  Variables are given new values with
"assignment operators", "increment operators", and "decrement
operators".  *Note Assignment Expressions: Assignment Ops.

   A few variables have special built-in meanings, such as `FS' (the
field separator), and `NF' (the number of fields in the current input
record).  *Note Built-in Variables::, for a list of the built-in
variables.  These built-in variables can be used and assigned just like
all other variables, but their values are also used or changed
automatically by `awk'.  All built-in variables' names are entirely
uppercase.

   Variables in `awk' can be assigned either numeric or string values.
The kind of value a variable holds can change over the life of a
program.  By default, variables are initialized to the empty string,
which is zero if converted to a number.  There is no need to
"initialize" each variable explicitly in `awk', which is what you would
do in C and in most other traditional languages.


File: gawk.info,  Node: Assignment Options,  Prev: Using Variables,  Up: Variables

Assigning Variables on the Command Line
---------------------------------------

   Any `awk' variable can be set by including a "variable assignment"
among the arguments on the command line when `awk' is invoked (*note
Other Command-Line Arguments: Other Arguments.).  Such an assignment
has the following form:

     VARIABLE=TEXT

With it, a variable is set either at the beginning of the `awk' run or
in between input files.  When the assignment is preceded with the `-v'
option, as in the following:

     -v VARIABLE=TEXT

the variable is set at the very beginning, even before the `BEGIN'
rules are run.  The `-v' option and its assignment must precede all the
file name arguments, as well as the program text.  (*Note Command-Line
Options: Options, for more information about the `-v' option.)
Otherwise, the variable assignment is performed at a time determined by
its position among the input file arguments--after the processing of the
preceding input file argument.  For example:

     awk '{ print $n }' n=4 inventory-shipped n=2 BBS-list

prints the value of field number `n' for all input records.  Before the
first file is read, the command line sets the variable `n' equal to
four.  This causes the fourth field to be printed in lines from the
file `inventory-shipped'.  After the first file has finished, but
before the second file is started, `n' is set to two, so that the
second field is printed in lines from `BBS-list':

     $ awk '{ print $n }' n=4 inventory-shipped n=2 BBS-list
     -| 15
     -| 24
     ...
     -| 555-5553
     -| 555-3412
     ...

   Command-line arguments are made available for explicit examination by
the `awk' program in the `ARGV' array (*note Using `ARGC' and `ARGV':
ARGC and ARGV.).  `awk' processes the values of command-line
assignments for escape sequences (*note Escape Sequences::).  (d.c.)


File: gawk.info,  Node: Conversion,  Next: Arithmetic Ops,  Prev: Variables,  Up: Expressions

Conversion of Strings and Numbers
=================================

   Strings are converted to numbers and numbers are converted to
strings, if the context of the `awk' program demands it.  For example,
if the value of either `foo' or `bar' in the expression `foo + bar'
happens to be a string, it is converted to a number before the addition
is performed.  If numeric values appear in string concatenation, they
are converted to strings.  Consider the following:

     two = 2; three = 3
     print (two three) + 4

This prints the (numeric) value 27.  The numeric values of the
variables `two' and `three' are converted to strings and concatenated
together.  The resulting string is converted back to the number 23, to
which 4 is then added.

   If, for some reason, you need to force a number to be converted to a
string, concatenate the empty string, `""', with that number.  To force
a string to be converted to a number, add zero to that string.  A
string is converted to a number by interpreting any numeric prefix of
the string as numerals: `"2.5"' converts to 2.5, `"1e3"' converts to
1000, and `"25fix"' has a numeric value of 25.  Strings that can't be
interpreted as valid numbers convert to zero.

   The exact manner in which numbers are converted into strings is
controlled by the `awk' built-in variable `CONVFMT' (*note Built-in
Variables::).  Numbers are converted using the `sprintf' function with
`CONVFMT' as the format specifier (*note String Manipulation Functions:
String Functions.).

   `CONVFMT''s default value is `"%.6g"', which prints a value with at
least six significant digits.  For some applications, you might want to
change it to specify more precision.  On most modern machines, 17
digits is enough to capture a floating-point number's value exactly,
most of the time.(1)

   Strange results can occur if you set `CONVFMT' to a string that
doesn't tell `sprintf' how to format floating-point numbers in a useful
way.  For example, if you forget the `%' in the format, `awk' converts
all numbers to the same constant string.  As a special case, if a
number is an integer, then the result of converting it to a string is
_always_ an integer, no matter what the value of `CONVFMT' may be.
Given the following code fragment:

     CONVFMT = "%2.2f"
     a = 12
     b = a ""

`b' has the value `"12"', not `"12.00"'.  (d.c.)

   Prior to the POSIX standard, `awk' used the value of `OFMT' for
converting numbers to strings.  `OFMT' specifies the output format to
use when printing numbers with `print'.  `CONVFMT' was introduced in
order to separate the semantics of conversion from the semantics of
printing.  Both `CONVFMT' and `OFMT' have the same default value:
`"%.6g"'.  In the vast majority of cases, old `awk' programs do not
change their behavior.  However, these semantics for `OFMT' are
something to keep in mind if you must port your new style program to
older implementations of `awk'.  We recommend that instead of changing
your programs, just port `gawk' itself.  *Note The `print' Statement:
Print, for more information on the `print' statement.

   ---------- Footnotes ----------

   (1) Pathological cases can require up to 752 digits (!), but we
doubt that you need to worry about this.


File: gawk.info,  Node: Arithmetic Ops,  Next: Concatenation,  Prev: Conversion,  Up: Expressions

Arithmetic Operators
====================

   The `awk' language uses the common arithmetic operators when
evaluating expressions.  All of these arithmetic operators follow normal
precedence rules and work as you would expect them to.

   The following example uses a file named `grades', which contains a
list of student names as well as three test scores per student (it's a
small class):

     Pat   100 97 58
     Sandy  84 72 93
     Chris  72 92 89

This programs takes the file `grades' and prints the average of the
scores:

     $ awk '{ sum = $2 + $3 + $4 ; avg = sum / 3
     >        print $1, avg }' grades
     -| Pat 85
     -| Sandy 83
     -| Chris 84.3333

   The following list provides the arithmetic operators in `awk', in
order from the highest precedence to the lowest:

`- X'
     Negation.

`+ X'
     Unary plus; the expression is converted to a number.

`X ^ Y'
`X ** Y'
     Exponentiation; X raised to the Y power.  `2 ^ 3' has the value
     eight; the character sequence `**' is equivalent to `^'.

`X * Y'
     Multiplication.

`X / Y'
     Division;  because all numbers in `awk' are floating-point
     numbers, the result is _not_ rounded to an integer--`3 / 4' has
     the value 0.75.  (It is a common mistake, especially for C
     programmers, to forget that _all_ numbers in `awk' are
     floating-point, and that division of integer-looking constants
     produces a real number, not an integer.)

`X % Y'
     Remainder; further discussion is provided in the text, just after
     this list.

`X + Y'
     Addition.

`X - Y'
     Subtraction.

   Unary plus and minus have the same precedence, the multiplication
operators all have the same precedence, and addition and subtraction
have the same precedence.

   When computing the remainder of `X % Y', the quotient is rounded
toward zero to an integer and multiplied by Y. This result is
subtracted from X; this operation is sometimes known as "trunc-mod."
The following relation always holds:

     b * int(a / b) + (a % b) == a

   One possibly undesirable effect of this definition of remainder is
that `X % Y' is negative if X is negative.  Thus:

     -17 % 8 = -1

   In other `awk' implementations, the signedness of the remainder may
be machine-dependent.

   *Note:* The POSIX standard only specifies the use of `^' for
exponentiation.  For maximum portability, do not use the `**' operator.


File: gawk.info,  Node: Concatenation,  Next: Assignment Ops,  Prev: Arithmetic Ops,  Up: Expressions

String Concatenation
====================

     It seemed like a good idea at the time.
     Brian Kernighan

   There is only one string operation: concatenation.  It does not have
a specific operator to represent it.  Instead, concatenation is
performed by writing expressions next to one another, with no operator.
For example:

     $ awk '{ print "Field number one: " $1 }' BBS-list
     -| Field number one: aardvark
     -| Field number one: alpo-net
     ...

   Without the space in the string constant after the `:', the line
runs together.  For example:

     $ awk '{ print "Field number one:" $1 }' BBS-list
     -| Field number one:aardvark
     -| Field number one:alpo-net
     ...

   Because string concatenation does not have an explicit operator, it
is often necessary to insure that it happens at the right time by using
parentheses to enclose the items to concatenate.  For example, the
following code fragment does not concatenate `file' and `name' as you
might expect:

     file = "file"
     name = "name"
     print "something meaningful" > file name

It is necessary to use the following:

     print "something meaningful" > (file name)

   Parentheses should be used around concatenation in all but the most
common contexts, such as on the righthand side of `='.  Be careful
about the kinds of expressions used in string concatenation.  In
particular, the order of evaluation of expressions used for
concatenation is undefined in the `awk' language.  Consider this
example:

     BEGIN {
         a = "don't"
         print (a " " (a = "panic"))
     }

It is not defined whether the assignment to `a' happens before or after
the value of `a' is retrieved for producing the concatenated value.
The result could be either `don't panic', or `panic panic'.  The
precedence of concatenation, when mixed with other operators, is often
counter-intuitive.  Consider this example:

     $ awk 'BEGIN { print -12 " " -24 }'
     -| -12-24

   This "obviously" is concatenating -12, a space, and -24.  But where
did the space disappear to?  The answer lies in the combination of
operator precedences and `awk''s automatic conversion rules.  To get
the desired result, write the program in the following manner:

     $ awk 'BEGIN { print -12 " " (-24) }'
     -| -12 -24

   This forces `awk' to treat the `-' on the `-24' as unary.
Otherwise, it's parsed as follows:

         -12 (`" "' - 24)
     => -12 (0 - 24)
     => -12 (-24)
     => -12-24

   As mentioned earlier, when doing concatenation, _parenthesize_.
Otherwise, you're never quite sure what you'll get.


File: gawk.info,  Node: Assignment Ops,  Next: Increment Ops,  Prev: Concatenation,  Up: Expressions

Assignment Expressions
======================

   An "assignment" is an expression that stores a (usually different)
value into a variable.  For example, let's assign the value one to the
variable `z':

     z = 1

   After this expression is executed, the variable `z' has the value
one.  Whatever old value `z' had before the assignment is forgotten.

   Assignments can also store string values.  For example, the
following stores the value `"this food is good"' in the variable
`message':

     thing = "food"
     predicate = "good"
     message = "this " thing " is " predicate

This also illustrates string concatenation.  The `=' sign is called an
"assignment operator".  It is the simplest assignment operator because
the value of the righthand operand is stored unchanged.  Most operators
(addition, concatenation, and so on) have no effect except to compute a
value.  If the value isn't used, there's no reason to use the operator.
An assignment operator is different; it does produce a value, but even
if you ignore it, the assignment still makes itself felt through the
alteration of the variable.  We call this a "side effect".

   The lefthand operand of an assignment need not be a variable (*note
Variables::); it can also be a field (*note Changing the Contents of a
Field: Changing Fields.) or an array element (*note Arrays in `awk':
Arrays.).  These are all called "lvalues", which means they can appear
on the lefthand side of an assignment operator.  The righthand operand
may be any expression; it produces the new value that the assignment
stores in the specified variable, field, or array element. (Such values
are called "rvalues".)

   It is important to note that variables do _not_ have permanent types.
A variable's type is simply the type of whatever value it happens to
hold at the moment.  In the following program fragment, the variable
`foo' has a numeric value at first, and a string value later on:

     foo = 1
     print foo
     foo = "bar"
     print foo

When the second assignment gives `foo' a string value, the fact that it
previously had a numeric value is forgotten.

   String values that do not begin with a digit have a numeric value of
zero. After executing the following code, the value of `foo' is five:

     foo = "a string"
     foo = foo + 5

*Note:* Using a variable as a number and then later as a string can be
confusing and is poor programming style.  The previous two examples
illustrate how `awk' works, _not_ how you should write your programs!

   An assignment is an expression, so it has a value--the same value
that is assigned.  Thus, `z = 1' is an expression with the value one.
One consequence of this is that you can write multiple assignments
together, such as:

     x = y = z = 5

This example stores the value five in all three variables (`x', `y',
and `z').  It does so because the value of `z = 5', which is five, is
stored into `y' and then the value of `y = z = 5', which is five, is
stored into `x'.

   Assignments may be used anywhere an expression is called for.  For
example, it is valid to write `x != (y = 1)' to set `y' to one, and
then test whether `x' equals one.  But this style tends to make
programs hard to read; such nesting of assignments should be avoided,
except perhaps in a one-shot program.

   Aside from `=', there are several other assignment operators that do
arithmetic with the old value of the variable.  For example, the
operator `+=' computes a new value by adding the righthand value to the
old value of the variable.  Thus, the following assignment adds five to
the value of `foo':

     foo += 5

This is equivalent to the following:

     foo = foo + 5

Use whichever makes the meaning of your program clearer.

   There are situations where using `+=' (or any assignment operator)
is _not_ the same as simply repeating the lefthand operand in the
righthand expression.  For example:

     # Thanks to Pat Rankin for this example
     BEGIN  {
         foo[rand()] += 5
         for (x in foo)
            print x, foo[x]
     
         bar[rand()] = bar[rand()] + 5
         for (x in bar)
            print x, bar[x]
     }

The indices of `bar' are practically guaranteed to be different, because
`rand' returns different values each time it is called.  (Arrays and
the `rand' function haven't been covered yet.  *Note Arrays in `awk':
Arrays, and see *Note Numeric Functions::, for more information).  This
example illustrates an important fact about assignment operators: the
lefthand expression is only evaluated _once_.  It is up to the
implementation as to which expression is evaluated first, the lefthand
or the righthand.  Consider this example:

     i = 1
     a[i += 2] = i + 1

The value of `a[3]' could be either two or four.

   Here is a table of the arithmetic assignment operators.  In each
case, the righthand operand is an expression whose value is converted
to a number.

LVALUE `+=' INCREMENT   Adds INCREMENT to the value of LVALUE.
LVALUE `-=' DECREMENT   Subtracts DECREMENT from the value of LVALUE.
LVALUE `*='             Multiplies the value of LVALUE by COEFFICIENT.
COEFFICIENT             
LVALUE `/=' DIVISOR     Divides the value of LVALUE by DIVISOR.
LVALUE `%=' MODULUS     Sets LVALUE to its remainder by MODULUS.
LVALUE `^=' POWER       
LVALUE `**=' POWER      Raises LVALUE to the power POWER.

   *Note:* Only the `^=' operator is specified by POSIX.  For maximum
portability, do not use the `**=' operator.

Advanced Notes: Syntactic Ambiguities Between `/=' and Regular Expressions
--------------------------------------------------------------------------

   There is a syntactic ambiguity between the `/=' assignment operator
and regexp constants whose first character is an `='.  (d.c.)  This is
most notable in commercial `awk' versions.  For example:

     $ awk /==/ /dev/null
     error--> awk: syntax error at source line 1
     error-->  context is
     error-->         >>> /= <<<
     error--> awk: bailing out at source line 1

A workaround is:

     awk '/[=]=/' /dev/null

   `gawk' does not have this problem, nor do the other freely available
versions described in *Note Other Freely Available `awk'
Implementations: Other Versions.


File: gawk.info,  Node: Increment Ops,  Next: Truth Values,  Prev: Assignment Ops,  Up: Expressions

Increment and Decrement Operators
=================================

   "Increment" and "decrement operators" increase or decrease the value
of a variable by one.  An assignment operator can do the same thing, so
the increment operators add no power to the `awk' language; however,
they are convenient abbreviations for very common operations.

   The operator used for adding one is written `++'.  It can be used to
increment a variable either before or after taking its value.  To
pre-increment a variable `v', write `++v'.  This adds one to the value
of `v'--that new value is also the value of the expression. (The
assignment expression `v += 1' is completely equivalent.)  Writing the
`++' after the variable specifies post-increment.  This increments the
variable value just the same; the difference is that the value of the
increment expression itself is the variable's _old_ value.  Thus, if
`foo' has the value four, then the expression `foo++' has the value
four, but it changes the value of `foo' to five.  In other words, the
operator returns the old value of the variable, but with the side
effect of incrementing it.

   The post-increment `foo++' is nearly the same as writing `(foo += 1)
- 1'.  It is not perfectly equivalent because all numbers in `awk' are
floating-point--in floating-point, `foo + 1 - 1' does not necessarily
equal `foo'.  But the difference is minute as long as you stick to
numbers that are fairly small (less than 10e12).

   Fields and array elements are incremented just like variables.  (Use
`$(i++)' when you want to do a field reference and a variable increment
at the same time.  The parentheses are necessary because of the
precedence of the field reference operator `$'.)

   The decrement operator `--' works just like `++', except that it
subtracts one instead of adding it.  As with `++', it can be used before
the lvalue to pre-decrement or after it to post-decrement.  Following
is a summary of increment and decrement expressions:

`++LVALUE'
     This expression increments LVALUE, and the new value becomes the
     value of the expression.

`LVALUE++'
     This expression increments LVALUE, but the value of the expression
     is the _old_ value of LVALUE.

`--LVALUE'
     This expression is like `++LVALUE', but instead of adding, it
     subtracts.  It decrements LVALUE and delivers the value that is
     the result.

`LVALUE--'
     This expression is like `LVALUE++', but instead of adding, it
     subtracts.  It decrements LVALUE.  The value of the expression is
     the _old_ value of LVALUE.

Advanced Notes: Operator Evaluation Order
-----------------------------------------

     Doctor, doctor!  It hurts when I do this!
     So don't do that!
     Groucho Marx

What happens for something like the following?

     b = 6
     print b += b++

Or something even stranger?

     b = 6
     b += ++b + b++
     print b

   In other words, when do the various side effects prescribed by the
postfix operators (`b++') take effect?  When side effects happen is
"implementation defined".  In other words, it is up to the particular
version of `awk'.  The result for the first example may be 12 or 13,
and for the second, it may be 22 or 23.

   In short, doing things like this is not recommended and definitely
not anything that you can rely upon for portability.  You should avoid
such things in your own programs.


File: gawk.info,  Node: Truth Values,  Next: Typing and Comparison,  Prev: Increment Ops,  Up: Expressions

True and False in `awk'
=======================

   Many programming languages have a special representation for the
concepts of "true" and "false."  Such languages usually use the special
constants `true' and `false', or perhaps their uppercase equivalents.
However, `awk' is different.  It borrows a very simple concept of true
and false from C.  In `awk', any nonzero numeric value _or_ any
nonempty string value is true.  Any other value (zero or the null
string `""') is false.  The following program prints `A strange truth
value' three times:

     BEGIN {
        if (3.1415927)
            print "A strange truth value"
        if ("Four Score And Seven Years Ago")
            print "A strange truth value"
        if (j = 57)
            print "A strange truth value"
     }

   There is a surprising consequence of the "nonzero or non-null" rule:
the string constant `"0"' is actually true, because it is non-null.
(d.c.)


File: gawk.info,  Node: Typing and Comparison,  Next: Boolean Ops,  Prev: Truth Values,  Up: Expressions

Variable Typing and Comparison Expressions
==========================================

     The Guide is definitive. Reality is frequently inaccurate.
     The Hitchhiker's Guide to the Galaxy

   Unlike other programming languages, `awk' variables do not have a
fixed type. Instead, they can be either a number or a string, depending
upon the value that is assigned to them.

   The 1992 POSIX standard introduced the concept of a "numeric
string", which is simply a string that looks like a number--for
example, `" +2"'.  This concept is used for determining the type of a
variable.  The type of the variable is important because the types of
two variables determine how they are compared.  In `gawk', variable
typing follows these rules:

   * A numeric constant or the result of a numeric operation has the
     NUMERIC attribute.

   * A string constant or the result of a string operation has the
     STRING attribute.

   * Fields, `getline' input, `FILENAME', `ARGV' elements, `ENVIRON'
     elements, and the elements of an array created by `split' that are
     numeric strings have the STRNUM attribute.  Otherwise, they have
     the STRING attribute.  Uninitialized variables also have the
     STRNUM attribute.

   * Attributes propagate across assignments but are not changed by any
     use.

   The last rule is particularly important. In the following program,
`a' has numeric type, even though it is later used in a string
operation:

     BEGIN {
              a = 12.345
              b = a " is a cute number"
              print b
     }

   When two operands are compared, either string comparison or numeric
comparison may be used. This depends upon the attributes of the
operands, according to the following symmetric matrix:

             +----------------------------------------------
             |       STRING          NUMERIC         STRNUM
     --------+----------------------------------------------
             |
     STRING  |       string          string          string
             |
     NUMERIC |       string          numeric         numeric
             |
     STRNUM  |       string          numeric         numeric
     --------+----------------------------------------------

   The basic idea is that user input that looks numeric--and _only_
user input--should be treated as numeric, even though it is actually
made of characters and is therefore also a string.  Thus, for example,
the string constant `" +3.14"' is a string, even though it looks
numeric, and is _never_ treated as number for comparison purposes.

   In short, when one operand is a "pure" string, such as a string
constant, then a string comparison is performed.  Otherwise, a numeric
comparison is performed.(1)

   "Comparison expressions" compare strings or numbers for
relationships such as equality.  They are written using "relational
operators", which are a superset of those in C.  Here is a table of
them:

`X < Y'
     True if X is less than Y.

`X <= Y'
     True if X is less than or equal to Y.

`X > Y'
     True if X is greater than Y.

`X >= Y'
     True if X is greater than or equal to Y.

`X == Y'
     True if X is equal to Y.

`X != Y'
     True if X is not equal to Y.

`X ~ Y'
     True if the string X matches the regexp denoted by Y.

`X !~ Y'
     True if the string X does not match the regexp denoted by Y.

`SUBSCRIPT in ARRAY'
     True if the array ARRAY has an element with the subscript
     SUBSCRIPT.

   Comparison expressions have the value one if true and zero if false.
When comparing operands of mixed types, numeric operands are converted
to strings using the value of `CONVFMT' (*note Conversion of Strings
and Numbers: Conversion.).

   Strings are compared by comparing the first character of each, then
the second character of each, and so on.  Thus, `"10"' is less than
`"9"'.  If there are two strings where one is a prefix of the other,
the shorter string is less than the longer one.  Thus, `"abc"' is less
than `"abcd"'.

   It is very easy to accidentally mistype the `==' operator and leave
off one of the `=' characters.  The result is still valid `awk' code,
but the program does not do what is intended:

     if (a = b)   # oops! should be a == b
        ...
     else
        ...

Unless `b' happens to be zero or the null string, the `if' part of the
test always succeeds.  Because the operators are so similar, this kind
of error is very difficult to spot when scanning the source code.

   The following table of expressions illustrates the kind of comparison
`gawk' performs, as well as what the result of the comparison is:

`1.5 <= 2.0'
     numeric comparison (true)

`"abc" >= "xyz"'
     string comparison (false)

`1.5 != " +2"'
     string comparison (true)

`"1e2" < "3"'
     string comparison (true)

`a = 2; b = "2"'
`a == b'
     string comparison (true)

`a = 2; b = " +2"'

`a == b'
     string comparison (false)

   In the next example:

     $ echo 1e2 3 | awk '{ print ($1 < $2) ? "true" : "false" }'
     -| false

the result is `false' because both `$1' and `$2' are user input.  They
are numeric strings--therefore both have the STRNUM attribute,
dictating a numeric comparison.  The purpose of the comparison rules
and the use of numeric strings is to attempt to produce the behavior
that is "least surprising," while still "doing the right thing."
String comparisons and regular expression comparisons are very
different.  For example:

     x == "foo"

has the value one, or is true if the variable `x' is precisely `foo'.
By contrast:

     x ~ /foo/

has the value one if `x' contains `foo', such as `"Oh, what a fool am
I!"'.

   The righthand operand of the `~' and `!~' operators may be either a
regexp constant (`/.../') or an ordinary expression. In the latter
case, the value of the expression as a string is used as a dynamic
regexp (*note How to Use Regular Expressions: Regexp Usage.; also *note
Using Dynamic Regexps: Computed Regexps.).

   In modern implementations of `awk', a constant regular expression in
slashes by itself is also an expression.  The regexp `/REGEXP/' is an
abbreviation for the following comparison expression:

     $0 ~ /REGEXP/

   One special place where `/foo/' is _not_ an abbreviation for `$0 ~
/foo/' is when it is the righthand operand of `~' or `!~'.  *Note Using
Regular Expression Constants: Using Constant Regexps, where this is
discussed in more detail.

   ---------- Footnotes ----------

   (1) The POSIX standard is under revision.  The revised standard's
rules for typing and comparison are the same as just described for
`gawk'.


File: gawk.info,  Node: Boolean Ops,  Next: Conditional Exp,  Prev: Typing and Comparison,  Up: Expressions

Boolean Expressions
===================

   A "Boolean expression" is a combination of comparison expressions or
matching expressions, using the Boolean operators "or" (`||'), "and"
(`&&'), and "not" (`!'), along with parentheses to control nesting.
The truth value of the Boolean expression is computed by combining the
truth values of the component expressions.  Boolean expressions are
also referred to as "logical expressions".  The terms are equivalent.

   Boolean expressions can be used wherever comparison and matching
expressions can be used.  They can be used in `if', `while', `do', and
`for' statements (*note Control Statements in Actions: Statements.).
They have numeric values (one if true, zero if false) that come into
play if the result of the Boolean expression is stored in a variable or
used in arithmetic.

   In addition, every Boolean expression is also a valid pattern, so
you can use one as a pattern to control the execution of rules.  The
Boolean operators are:

`BOOLEAN1 && BOOLEAN2'
     True if both BOOLEAN1 and BOOLEAN2 are true.  For example, the
     following statement prints the current input record if it contains
     both `2400' and `foo':

          if ($0 ~ /2400/ && $0 ~ /foo/) print

     The subexpression BOOLEAN2 is evaluated only if BOOLEAN1 is true.
     This can make a difference when BOOLEAN2 contains expressions that
     have side effects. In the case of `$0 ~ /foo/ && ($2 == bar++)',
     the variable `bar' is not incremented if there is no substring
     `foo' in the record.

`BOOLEAN1 || BOOLEAN2'
     True if at least one of BOOLEAN1 or BOOLEAN2 is true.  For
     example, the following statement prints all records in the input
     that contain _either_ `2400' or `foo' or both:

          if ($0 ~ /2400/ || $0 ~ /foo/) print

     The subexpression BOOLEAN2 is evaluated only if BOOLEAN1 is false.
     This can make a difference when BOOLEAN2 contains expressions
     that have side effects.

`! BOOLEAN'
     True if BOOLEAN is false.  For example, the following program
     prints `no home!' in the unusual event that the `HOME' environment
     variable is not defined:

          BEGIN { if (! ("HOME" in ENVIRON))
                         print "no home!" }

     (The `in' operator is described in *Note Referring to an Array
     Element: Reference to Elements.)

   The `&&' and `||' operators are called "short-circuit" operators
because of the way they work.  Evaluation of the full expression is
"short-circuited" if the result can be determined part way through its
evaluation.

   Statements that use `&&' or `||' can be continued simply by putting
a newline after them.  But you cannot put a newline in front of either
of these operators without using backslash continuation (*note `awk'
Statements Versus Lines: Statements/Lines.).

   The actual value of an expression using the `!' operator is either
one or zero, depending upon the truth value of the expression it is
applied to.  The `!' operator is often useful for changing the sense of
a flag variable from false to true and back again. For example, the
following program is one way to print lines in between special
bracketing lines:

     $1 == "START"   { interested = ! interested; next }
     interested == 1 { print }
     $1 == "END"     { interested = ! interested; next }

The variable `interested', as with all `awk' variables, starts out
initialized to zero, which is also false.  When a line is seen whose
first field is `START', the value of `interested' is toggled to true,
using `!'. The next rule prints lines as long as `interested' is true.
When a line is seen whose first field is `END', `interested' is toggled
back to false.

   *Note:* The `next' statement is discussed in *Note The `next'
Statement: Next Statement.  `next' tells `awk' to skip the rest of the
rules, get the next record, and start processing the rules over again
at the top.  The reason it's there is to avoid printing the bracketing
`START' and `END' lines.


File: gawk.info,  Node: Conditional Exp,  Next: Function Calls,  Prev: Boolean Ops,  Up: Expressions

Conditional Expressions
=======================

   A "conditional expression" is a special kind of expression that has
three operands.  It allows you to use one expression's value to select
one of two other expressions.  The conditional expression is the same
as in the C language, as shown here:

     SELECTOR ? IF-TRUE-EXP : IF-FALSE-EXP

There are three subexpressions.  The first, SELECTOR, is always
computed first.  If it is "true" (not zero or not null), then
IF-TRUE-EXP is computed next and its value becomes the value of the
whole expression.  Otherwise, IF-FALSE-EXP is computed next and its
value becomes the value of the whole expression.  For example, the
following expression produces the absolute value of `x':

     x >= 0 ? x : -x

   Each time the conditional expression is computed, only one of
IF-TRUE-EXP and IF-FALSE-EXP is used; the other is ignored.  This is
important when the expressions have side effects.  For example, this
conditional expression examines element `i' of either array `a' or
array `b', and increments `i':

     x == y ? a[i++] : b[i++]

This is guaranteed to increment `i' exactly once, because each time
only one of the two increment expressions is executed and the other is
not.  *Note Arrays in `awk': Arrays, for more information about arrays.

   As a minor `gawk' extension, a statement that uses `?:' can be
continued simply by putting a newline after either character.  However,
putting a newline in front of either character does not work without
using backslash continuation (*note `awk' Statements Versus Lines:
Statements/Lines.).  If `--posix' is specified (*note Command-Line
Options: Options.), then this extension is disabled.


File: gawk.info,  Node: Function Calls,  Next: Precedence,  Prev: Conditional Exp,  Up: Expressions

Function Calls
==============

   A "function" is a name for a particular calculation.  This enables
you to ask for it by name at any point in the program.  For example,
the function `sqrt' computes the square root of a number.

   A fixed set of functions are "built-in", which means they are
available in every `awk' program.  The `sqrt' function is one of these.
*Note Built-in Functions: Built-in, for a list of built-in functions
and their descriptions.  In addition, you can define functions for use
in your program.  *Note User-Defined Functions: User-defined, for
instructions on how to do this.

   The way to use a function is with a "function call" expression,
which consists of the function name followed immediately by a list of
"arguments" in parentheses.  The arguments are expressions that provide
the raw materials for the function's calculations.  When there is more
than one argument, they are separated by commas.  If there are no
arguments, just write `()' after the function name.  The following
examples show function calls with and without arguments:

     sqrt(x^2 + y^2)        one argument
     atan2(y, x)            two arguments
     rand()                 no arguments

   *Caution:* Do not put any space between the function name and the
open-parenthesis!  A user-defined function name looks just like the
name of a variable--a space would make the expression look like
concatenation of a variable with an expression inside parentheses.

   With built-in functions, space before the parenthesis is harmless,
but it is best not to get into the habit of using space to avoid
mistakes with user-defined functions.  Each function expects a
particular number of arguments.  For example, the `sqrt' function must
be called with a single argument, the number of which to take the
square root:

     sqrt(ARGUMENT)

   Some of the built-in functions have one or more optional arguments.
If those arguments are not supplied, the functions use a reasonable
default value.  *Note Built-in Functions: Built-in, for full details.
If arguments are omitted in calls to user-defined functions, then those
arguments are treated as local variables and initialized to the empty
string (*note User-Defined Functions: User-defined.).

   Like every other expression, the function call has a value, which is
computed by the function based on the arguments you give it.  In this
example, the value of `sqrt(ARGUMENT)' is the square root of ARGUMENT.
A function can also have side effects, such as assigning values to
certain variables or doing I/O.  The following program reads numbers,
one number per line, and prints the square root of each one:

     $ awk '{ print "The square root of", $1, "is", sqrt($1) }'
     1
     -| The square root of 1 is 1
     3
     -| The square root of 3 is 1.73205
     5
     -| The square root of 5 is 2.23607
     Ctrl-d


File: gawk.info,  Node: Precedence,  Prev: Function Calls,  Up: Expressions

Operator Precedence (How Operators Nest)
========================================

   "Operator precedence" determines how operators are grouped when
different operators appear close by in one expression.  For example,
`*' has higher precedence than `+'; thus, `a + b * c' means to multiply
`b' and `c', and then add `a' to the product (i.e., `a + (b * c)').

   The normal precedence of the operators can be overruled by using
parentheses.  Think of the precedence rules as saying where the
parentheses are assumed to be.  In fact, it is wise to always use
parentheses whenever there is an unusual combination of operators,
because other people who read the program may not remember what the
precedence is in this case.  Even experienced programmers occasionally
forget the exact rules, which leads to mistakes.  Explicit parentheses
help prevent any such mistakes.

   When operators of equal precedence are used together, the leftmost
operator groups first, except for the assignment, conditional, and
exponentiation operators, which group in the opposite order.  Thus, `a
- b + c' groups as `(a - b) + c' and `a = b = c' groups as `a = (b =
c)'.

   The precedence of prefix unary operators does not matter as long as
only unary operators are involved, because there is only one way to
interpret them: innermost first.  Thus, `$++i' means `$(++i)' and
`++$x' means `++($x)'.  However, when another operator follows the
operand, then the precedence of the unary operators can matter.  `$x^2'
means `($x)^2', but `-x^2' means `-(x^2)', because `-' has lower
precedence than `^', whereas `$' has higher precedence.  This table
presents `awk''s operators, in order of highest to lowest precedence:

`(...)'
     Grouping.

`$'
     Field.

`++ --'
     Increment, decrement.

`^ **'
     Exponentiation.  These operators group right-to-left.

`+ - !'
     Unary plus, minus, logical "not."

`* / %'
     Multiplication, division, modulus.

`+ -'
     Addition, subtraction.

`String Concatenation'
     No special symbol is used to indicate concatenation.  The operands
     are simply written side by side (*note String Concatenation:
     Concatenation.).

`< <= == !='
`> >= >> | |&'
     Relational and redirection.  The relational operators and the
     redirections have the same precedence level.  Characters such as
     `>' serve both as relationals and as redirections; the context
     distinguishes between the two meanings.

     Note that the I/O redirection operators in `print' and `printf'
     statements belong to the statement level, not to expressions.  The
     redirection does not produce an expression that could be the
     operand of another operator.  As a result, it does not make sense
     to use a redirection operator near another operator of lower
     precedence without parentheses.  Such combinations (for example,
     `print foo > a ? b : c'), result in syntax errors.  The correct
     way to write this statement is `print foo > (a ? b : c)'.

`~ !~'
     Matching, nonmatching.

`in'
     Array membership.

`&&'
     Logical "and".

`||'
     Logical "or".

`?:'
     Conditional.  This operator groups right-to-left.

`= += -= *='
`/= %= ^= **='
     Assignment.  These operators group right to left.

   *Note:* The `|&', `**', and `**=' operators are not specified by
POSIX.  For maximum portability, do not use them.


File: gawk.info,  Node: Patterns and Actions,  Next: Arrays,  Prev: Expressions,  Up: Top

Patterns, Actions, and Variables
********************************

   As you have already seen, each `awk' statement consists of a pattern
with an associated action.  This major node describes how you build
patterns and actions, what kinds of things you can do within actions,
and `awk''s built-in variables.

   The pattern-action rules and the statements available for use within
actions form the core of `awk' programming.  In a sense, everything
covered up to here has been the foundation that programs are built on
top of.  Now it's time to start building something useful.

* Menu:

* Pattern Overview::            What goes into a pattern.
* Using Shell Variables::       How to use shell variables with `awk'.
* Action Overview::             What goes into an action.
* Statements::                  Describes the various control statements in
                                detail.
* Built-in Variables::          Summarizes the built-in variables.


File: gawk.info,  Node: Pattern Overview,  Next: Using Shell Variables,  Prev: Patterns and Actions,  Up: Patterns and Actions

Pattern Elements
================

* Menu:

* Regexp Patterns::             Using regexps as patterns.
* Expression Patterns::         Any expression can be used as a pattern.
* Ranges::                      Pairs of patterns specify record ranges.
* BEGIN/END::                   Specifying initialization and cleanup rules.
* Empty::                       The empty pattern, which matches every record.

   Patterns in `awk' control the execution of rules--a rule is executed
when its pattern matches the current input record.  The following is a
summary of the types of `awk' patterns:

`/REGULAR EXPRESSION/'
     A regular expression. It matches when the text of the input record
     fits the regular expression.  (*Note Regular Expressions: Regexp.)

`EXPRESSION'
     A single expression.  It matches when its value is nonzero (if a
     number) or non-null (if a string).  (*Note Expressions as
     Patterns: Expression Patterns.)

`PAT1, PAT2'
     A pair of patterns separated by a comma, specifying a range of
     records.  The range includes both the initial record that matches
     PAT1 and the final record that matches PAT2.  (*Note Specifying
     Record Ranges with Patterns: Ranges.)

`BEGIN'
`END'
     Special patterns for you to supply startup or cleanup actions for
     your `awk' program.  (*Note The `BEGIN' and `END' Special
     Patterns: BEGIN/END.)

`EMPTY'
     The empty pattern matches every input record.  (*Note The Empty
     Pattern: Empty.)


File: gawk.info,  Node: Regexp Patterns,  Next: Expression Patterns,  Prev: Pattern Overview,  Up: Pattern Overview

Regular Expressions as Patterns
-------------------------------

   Regular expressions are one of the first kinds of patterns presented
in this book.  This kind of pattern is simply a regexp constant in the
pattern part of a rule.  Its  meaning is `$0 ~ /PATTERN/'.  The pattern
matches when the input record matches the regexp.  For example:

     /foo|bar|baz/  { buzzwords++ }
     END            { print buzzwords, "buzzwords seen" }


File: gawk.info,  Node: Expression Patterns,  Next: Ranges,  Prev: Regexp Patterns,  Up: Pattern Overview

Expressions as Patterns
-----------------------

   Any `awk' expression is valid as an `awk' pattern.  The pattern
matches if the expression's value is nonzero (if a number) or non-null
(if a string).  The expression is reevaluated each time the rule is
tested against a new input record.  If the expression uses fields such
as `$1', the value depends directly on the new input record's text;
otherwise, it depends on only what has happened so far in the execution
of the `awk' program.

   Comparison expressions, using the comparison operators described in
*Note Variable Typing and Comparison Expressions: Typing and Comparison,
are a very common kind of pattern.  Regexp matching and nonmatching are
also very common expressions.  The left operand of the `~' and `!~'
operators is a string.  The right operand is either a constant regular
expression enclosed in slashes (`/REGEXP/'), or any expression whose
string value is used as a dynamic regular expression (*note Using
Dynamic Regexps: Computed Regexps.).  The following example prints the
second field of each input record whose first field is precisely `foo':

     $ awk '$1 == "foo" { print $2 }' BBS-list

(There is no output, because there is no BBS site with the exact name
`foo'.)  Contrast this with the following regular expression match,
which accepts any record with a first field that contains `foo':

     $ awk '$1 ~ /foo/ { print $2 }' BBS-list
     -| 555-1234
     -| 555-6699
     -| 555-6480
     -| 555-2127

   A regexp constant as a pattern is also a special case of an
expression pattern.  The expression `/foo/' has the value one if `foo'
appears in the current input record. Thus, as a pattern, `/foo/'
matches any record containing `foo'.

   Boolean expressions are also commonly used as patterns.  Whether the
pattern matches an input record depends on whether its subexpressions
match.  For example, the following command prints all the records in
`BBS-list' that contain both `2400' and `foo':

     $ awk '/2400/ && /foo/' BBS-list
     -| fooey        555-1234     2400/1200/300     B

   The following command prints all records in `BBS-list' that contain
_either_ `2400' or `foo' (or both, of course):

     $ awk '/2400/ || /foo/' BBS-list
     -| alpo-net     555-3412     2400/1200/300     A
     -| bites        555-1675     2400/1200/300     A
     -| fooey        555-1234     2400/1200/300     B
     -| foot         555-6699     1200/300          B
     -| macfoo       555-6480     1200/300          A
     -| sdace        555-3430     2400/1200/300     A
     -| sabafoo      555-2127     1200/300          C

   The following command prints all records in `BBS-list' that do _not_
contain the string `foo':

     $ awk '! /foo/' BBS-list
     -| aardvark     555-5553     1200/300          B
     -| alpo-net     555-3412     2400/1200/300     A
     -| barfly       555-7685     1200/300          A
     -| bites        555-1675     2400/1200/300     A
     -| camelot      555-0542     300               C
     -| core         555-2912     1200/300          C
     -| sdace        555-3430     2400/1200/300     A

   The subexpressions of a Boolean operator in a pattern can be
constant regular expressions, comparisons, or any other `awk'
expressions.  Range patterns are not expressions, so they cannot appear
inside Boolean patterns.  Likewise, the special patterns `BEGIN' and
`END', which never match any input record, are not expressions and
cannot appear inside Boolean patterns.


File: gawk.info,  Node: Ranges,  Next: BEGIN/END,  Prev: Expression Patterns,  Up: Pattern Overview

Specifying Record Ranges with Patterns
--------------------------------------

   A "range pattern" is made of two patterns separated by a comma, in
the form `BEGPAT, ENDPAT'.  It is used to match ranges of consecutive
input records.  The first pattern, BEGPAT, controls where the range
begins, while ENDPAT controls where the pattern ends.  For example, the
following:

     awk '$1 == "on", $1 == "off"' myfile

prints every record in `myfile' between `on'/`off' pairs, inclusive.

   A range pattern starts out by matching BEGPAT against every input
record.  When a record matches BEGPAT, the range pattern is "turned on"
and the range pattern matches this record as well.  As long as the
range pattern stays turned on, it automatically matches every input
record read.  The range pattern also matches ENDPAT against every input
record; when this succeeds, the range pattern is turned off again for
the following record.  Then the range pattern goes back to checking
BEGPAT against each record.

   The record that turns on the range pattern and the one that turns it
off both match the range pattern.  If you don't want to operate on
these records, you can write `if' statements in the rule's action to
distinguish them from the records you are interested in.

   It is possible for a pattern to be turned on and off by the same
record. If the record satisfies both conditions, then the action is
executed for just that record.  For example, suppose there is text
between two identical markers (e.g., the `%' symbol), each on its own
line, that should be ignored.  A first attempt would be to combine a
range pattern that describes the delimited text with the `next'
statement (not discussed yet, *note The `next' Statement: Next
Statement.).  This causes `awk' to skip any further processing of the
current record and start over again with the next input record. Such a
program looks like this:

     /^%$/,/^%$/    { next }
                    { print }

This program fails because the range pattern is both turned on and
turned off by the first line, which just has a `%' on it.  To
accomplish this task, write the program in the following manner, using
a flag:

     /^%$/     { skip = ! skip; next }
     skip == 1 { next } # skip lines with `skip' set

   In a range pattern, the comma (`,') has the lowest precedence of all
the operators (i.e., it is evaluated last).  Thus, the following
program attempts to combine a range pattern with another, simpler test:

     echo Yes | awk '/1/,/2/ || /Yes/'

   The intent of this program is `(/1/,/2/) || /Yes/'.  However, `awk'
interprets this as `/1/, (/2/ || /Yes/)'.  This cannot be changed or
worked around; range patterns do not combine with other patterns:

     $ echo yes | gawk '(/1/,/2/) || /Yes/'
     error--> gawk: cmd. line:1: (/1/,/2/) || /Yes/
     error--> gawk: cmd. line:1:           ^ parse error
     error--> gawk: cmd. line:2: (/1/,/2/) || /Yes/
     error--> gawk: cmd. line:2:                   ^ unexpected newline


File: gawk.info,  Node: BEGIN/END,  Next: Empty,  Prev: Ranges,  Up: Pattern Overview

The `BEGIN' and `END' Special Patterns
--------------------------------------

   All the patterns described so far are for matching input records.
The `BEGIN' and `END' special patterns are different.  They supply
startup and cleanup actions for `awk' programs.  `BEGIN' and `END'
rules must have actions; there is no default action for these rules
because there is no current record when they run.  `BEGIN' and `END'
rules are often referred to as "`BEGIN' and `END' blocks" by long-time
`awk' programmers.

* Menu:

* Using BEGIN/END::             How and why to use BEGIN/END rules.
* I/O And BEGIN/END::           I/O issues in BEGIN/END rules.


File: gawk.info,  Node: Using BEGIN/END,  Next: I/O And BEGIN/END,  Prev: BEGIN/END,  Up: BEGIN/END

Startup and Cleanup Actions
...........................

   A `BEGIN' rule is executed once only, before the first input record
is read. Likewise, an `END' rule is executed once only, after all the
input is read.  For example:

     $ awk '
     > BEGIN { print "Analysis of \"foo\"" }
     > /foo/ { ++n }
     > END   { print "\"foo\" appears", n, "times." }' BBS-list
     -| Analysis of "foo"
     -| "foo" appears 4 times.

   This program finds the number of records in the input file `BBS-list'
that contain the string `foo'.  The `BEGIN' rule prints a title for the
report.  There is no need to use the `BEGIN' rule to initialize the
counter `n' to zero, since `awk' does this automatically (*note
Variables::).  The second rule increments the variable `n' every time a
record containing the pattern `foo' is read.  The `END' rule prints the
value of `n' at the end of the run.

   The special patterns `BEGIN' and `END' cannot be used in ranges or
with Boolean operators (indeed, they cannot be used with any operators).
An `awk' program may have multiple `BEGIN' and/or `END' rules.  They
are executed in the order in which they appear: all the `BEGIN' rules
at startup and all the `END' rules at termination.  `BEGIN' and `END'
rules may be intermixed with other rules.  This feature was added in
the 1987 version of `awk' and is included in the POSIX standard.  The
original (1978) version of `awk' required the `BEGIN' rule to be placed
at the beginning of the program, the `END' rule to be placed at the
end, and only allowed one of each.  This is no longer required, but it
is a good idea to follow this template in terms of program organization
and readability.

   Multiple `BEGIN' and `END' rules are useful for writing library
functions, because each library file can have its own `BEGIN' and/or
`END' rule to do its own initialization and/or cleanup.  The order in
which library functions are named on the command line controls the
order in which their `BEGIN' and `END' rules are executed.  Therefore,
you have to be careful when writing such rules in library files so that
the order in which they are executed doesn't matter.  *Note
Command-Line Options: Options, for more information on using library
functions.  *Note A Library of `awk' Functions: Library Functions, for
a number of useful library functions.

   If an `awk' program has only a `BEGIN' rule and no other rules, then
the program exits after the `BEGIN' rule is run.(1)  However, if an
`END' rule exists, then the input is read, even if there are no other
rules in the program.  This is necessary in case the `END' rule checks
the `FNR' and `NR' variables.

   ---------- Footnotes ----------

   (1) The original version of `awk' used to keep reading and ignoring
input until the end of the file was seen.


File: gawk.info,  Node: I/O And BEGIN/END,  Prev: Using BEGIN/END,  Up: BEGIN/END

Input/Output from `BEGIN' and `END' Rules
.........................................

   There are several (sometimes subtle) points to remember when doing
I/O from a `BEGIN' or `END' rule.  The first has to do with the value
of `$0' in a `BEGIN' rule.  Because `BEGIN' rules are executed before
any input is read, there simply is no input record, and therefore no
fields, when executing `BEGIN' rules.  References to `$0' and the fields
yield a null string or zero, depending upon the context.  One way to
give `$0' a real value is to execute a `getline' command without a
variable (*note Explicit Input with `getline': Getline.).  Another way
is simply to assign a value to `$0'.

   The second point is similar to the first but from the other
direction.  Traditionally, due largely to implementation issues, `$0'
and `NF' were _undefined_ inside an `END' rule.  The POSIX standard
specifies that `NF' is available in an `END' rule. It contains the
number of fields from the last input record.  Most probably due to an
oversight, the standard does not say that `$0' is also preserved,
although logically one would think that it should be.  In fact, `gawk'
does preserve the value of `$0' for use in `END' rules.  Be aware,
however, that Unix `awk', and possibly other implementations, do not.

   The third point follows from the first two.  The meaning of `print'
inside a `BEGIN' or `END' rule is the same as always: `print $0'.  If
`$0' is the null string, then this prints an empty line.  Many long
time `awk' programmers use an unadorned `print' in `BEGIN' and `END'
rules, to mean `print ""', relying on `$0' being null.  Although one
might generally get away with this in `BEGIN' rules, it is a very bad
idea in `END' rules, at least in `gawk'.  It is also poor style, since
if an empty line is needed in the output, the program should print one
explicitly.

   Finally, the `next' and `nextfile' statements are not allowed in a
`BEGIN' rule, because the implicit
read-a-record-and-match-against-the-rules loop has not started yet.
Similarly, those statements are not valid in an `END' rule, since all
the input has been read.  (*Note The `next' Statement: Next Statement,
and see *Note Using `gawk''s `nextfile' Statement: Nextfile Statement.)


File: gawk.info,  Node: Empty,  Prev: BEGIN/END,  Up: Pattern Overview

The Empty Pattern
-----------------

   An empty (i.e., nonexistent) pattern is considered to match _every_
input record.  For example, the program:

     awk '{ print $1 }' BBS-list

prints the first field of every record.


File: gawk.info,  Node: Using Shell Variables,  Next: Action Overview,  Prev: Pattern Overview,  Up: Patterns and Actions

Using Shell Variables in Programs
=================================

   `awk' programs are often used as components in larger programs
written in shell.  For example, it is very common to use a shell
variable to hold a pattern that the `awk' program searches for.  There
are two ways to get the value of the shell variable into the body of
the `awk' program.

   The most common method is to use shell quoting to substitute the
variable's value into the program inside the script.  For example, in
the following program:

     echo -n "Enter search pattern: "
     read pattern
     awk "/$pattern/ "'{ nmatches++ }
          END { print nmatches, "found" }' /path/to/data

the `awk' program consists of two pieces of quoted text that are
concatenated together to form the program.  The first part is
double-quoted, which allows substitution of the `pattern' variable
inside the quotes.  The second part is single-quoted.

   Variable substitution via quoting works, but can be potentially
messy.  It requires a good understanding of the shell's quoting rules
(*note Shell Quoting Issues: Quoting.), and it's often difficult to
correctly match up the quotes when reading the program.

   A better method is to use `awk''s variable assignment feature (*note
Assigning Variables on the Command Line: Assignment Options.)  to
assign the shell variable's value to an `awk' variable's value.  Then
use dynamic regexps to match the pattern (*note Using Dynamic Regexps:
Computed Regexps.).  The following shows how to redo the previous
example using this technique:

     echo -n "Enter search pattern: "
     read pattern
     awk -v pat="$pattern" '$0 ~ pat { nmatches++ }
            END { print nmatches, "found" }' /path/to/data

Now, the `awk' program is just one single-quoted string.  The
assignment `-v pat="$pattern"' still requires double quotes, in case
there is whitespace in the value of `$pattern'.  The `awk' variable
`pat' could be named `pattern' too, but that would be more confusing.
Using a variable also provides more flexibility, since the variable can
be used anywhere inside the program--for printing, as an array
subscript, or for any other use--without requiring the quoting tricks
at every point in the program.


File: gawk.info,  Node: Action Overview,  Next: Statements,  Prev: Using Shell Variables,  Up: Patterns and Actions

Actions
=======

   An `awk' program or script consists of a series of rules and
function definitions interspersed.  (Functions are described later.
*Note User-Defined Functions: User-defined.)  A rule contains a pattern
and an action, either of which (but not both) may be omitted.  The
purpose of the "action" is to tell `awk' what to do once a match for
the pattern is found.  Thus, in outline, an `awk' program generally
looks like this:

     [PATTERN] [{ ACTION }]
     [PATTERN] [{ ACTION }]
     ...
     function NAME(ARGS) { ... }
     ...

   An action consists of one or more `awk' "statements", enclosed in
curly braces (`{...}').  Each statement specifies one thing to do.  The
statements are separated by newlines or semicolons.  The curly braces
around an action must be used even if the action contains only one
statement, or if it contains no statements at all.  However, if you
omit the action entirely, omit the curly braces as well.  An omitted
action is equivalent to `{ print $0 }':

     /foo/  { }     match `foo', do nothing -- empty action
     /foo/          match `foo', print the record -- omitted action

   The following types of statements are supported in `awk':

Expressions
     Call functions or assign values to variables (*note
     Expressions::).  Executing this kind of statement simply computes
     the value of the expression.  This is useful when the expression
     has side effects (*note Assignment Expressions: Assignment Ops.).

Control statements
     Specify the control flow of `awk' programs.  The `awk' language
     gives you C-like constructs (`if', `for', `while', and `do') as
     well as a few special ones (*note Control Statements in Actions:
     Statements.).

Compound statements
     Consist of one or more statements enclosed in curly braces.  A
     compound statement is used in order to put several statements
     together in the body of an `if', `while', `do', or `for' statement.

Input statements
     Use the `getline' command (*note Explicit Input with `getline':
     Getline.).  Also supplied in `awk' are the `next' statement (*note
     The `next' Statement: Next Statement.), and the `nextfile'
     statement (*note Using `gawk''s `nextfile' Statement: Nextfile
     Statement.).

Output statements
     Such as `print' and `printf'.  *Note Printing Output: Printing.

Deletion statements
     For deleting array elements.  *Note The `delete' Statement: Delete.


File: gawk.info,  Node: Statements,  Next: Built-in Variables,  Prev: Action Overview,  Up: Patterns and Actions

Control Statements in Actions
=============================

   "Control statements", such as `if', `while', and so on, control the
flow of execution in `awk' programs.  Most of the control statements in
`awk' are patterned on similar statements in C.

   All the control statements start with special keywords, such as `if'
and `while', to distinguish them from simple expressions.  Many control
statements contain other statements.  For example, the `if' statement
contains another statement that may or may not be executed.  The
contained statement is called the "body".  To include more than one
statement in the body, group them into a single "compound statement"
with curly braces, separating them with newlines or semicolons.

* Menu:

* If Statement::                Conditionally execute some `awk'
                                statements.
* While Statement::             Loop until some condition is satisfied.
* Do Statement::                Do specified action while looping until some
                                condition is satisfied.
* For Statement::               Another looping statement, that provides
                                initialization and increment clauses.
* Break Statement::             Immediately exit the innermost enclosing loop.
* Continue Statement::          Skip to the end of the innermost enclosing
                                loop.
* Next Statement::              Stop processing the current input record.
* Nextfile Statement::          Stop processing the current file.
* Exit Statement::              Stop execution of `awk'.


File: gawk.info,  Node: If Statement,  Next: While Statement,  Prev: Statements,  Up: Statements

The `if'-`else' Statement
-------------------------

   The `if'-`else' statement is `awk''s decision-making statement.  It
looks like this:

     if (CONDITION) THEN-BODY [else ELSE-BODY]

The CONDITION is an expression that controls what the rest of the
statement does.  If the CONDITION is true, THEN-BODY is executed;
otherwise, ELSE-BODY is executed.  The `else' part of the statement is
optional.  The condition is considered false if its value is zero or
the null string; otherwise, the condition is true.  Refer to the
following:

     if (x % 2 == 0)
         print "x is even"
     else
         print "x is odd"

   In this example, if the expression `x % 2 == 0' is true (that is, if
the value of `x' is evenly divisible by two), then the first `print'
statement is executed; otherwise, the second `print' statement is
executed.  If the `else' keyword appears on the same line as THEN-BODY
and THEN-BODY is not a compound statement (i.e., not surrounded by
curly braces), then a semicolon must separate THEN-BODY from the `else'.
To illustrate this, the previous example can be rewritten as:

     if (x % 2 == 0) print "x is even"; else
             print "x is odd"

If the `;' is left out, `awk' can't interpret the statement and it
produces a syntax error.  Don't actually write programs this way,
because a human reader might fail to see the `else' if it is not the
first thing on its line.


File: gawk.info,  Node: While Statement,  Next: Do Statement,  Prev: If Statement,  Up: Statements

The `while' Statement
---------------------

   In programming, a "loop" is a part of a program that can be executed
two or more times in succession.  The `while' statement is the simplest
looping statement in `awk'.  It repeatedly executes a statement as long
as a condition is true.  For example:

     while (CONDITION)
       BODY

BODY is a statement called the "body" of the loop, and CONDITION is an
expression that controls how long the loop keeps running.  The first
thing the `while' statement does is test the CONDITION.  If the
CONDITION is true, it executes the statement BODY.  (The CONDITION is
true when the value is not zero and not a null string.)  After BODY has
been executed, CONDITION is tested again, and if it is still true, BODY
is executed again.  This process repeats until the CONDITION is no
longer true.  If the CONDITION is initially false, the body of the loop
is never executed and `awk' continues with the statement following the
loop.  This example prints the first three fields of each record, one
per line:

     awk '{ i = 1
            while (i <= 3) {
                print $i
                i++
            }
     }' inventory-shipped

The body of this loop is a compound statement enclosed in braces,
containing two statements.  The loop works in the following manner:
first, the value of `i' is set to one.  Then, the `while' statement
tests whether `i' is less than or equal to three.  This is true when
`i' equals one, so the `i'-th field is printed.  Then the `i++'
increments the value of `i' and the loop repeats.  The loop terminates
when `i' reaches four.

   A newline is not required between the condition and the body;
however using one makes the program clearer unless the body is a
compound statement or else is very simple.  The newline after the
open-brace that begins the compound statement is not required either,
but the program is harder to read without it.


File: gawk.info,  Node: Do Statement,  Next: For Statement,  Prev: While Statement,  Up: Statements

The `do'-`while' Statement
--------------------------

   The `do' loop is a variation of the `while' looping statement.  The
`do' loop executes the BODY once and then repeats the BODY as long as
the CONDITION is true.  It looks like this:

     do
       BODY
     while (CONDITION)

   Even if the CONDITION is false at the start, the BODY is executed at
least once (and only once, unless executing BODY makes CONDITION true).
Contrast this with the corresponding `while' statement:

     while (CONDITION)
       BODY

This statement does not execute BODY even once if the CONDITION is
false to begin with.  The following is an example of a `do' statement:

     {      i = 1
            do {
               print $0
               i++
            } while (i <= 10)
     }

This program prints each input record 10 times.  However, it isn't a
very realistic example, since in this case an ordinary `while' would do
just as well.  This situation reflects actual experience; only
occasionally is there a real use for a `do' statement.


File: gawk.info,  Node: For Statement,  Next: Break Statement,  Prev: Do Statement,  Up: Statements

The `for' Statement
-------------------

   The `for' statement makes it more convenient to count iterations of a
loop.  The general form of the `for' statement looks like this:

     for (INITIALIZATION; CONDITION; INCREMENT)
       BODY

The INITIALIZATION, CONDITION, and INCREMENT parts are arbitrary `awk'
expressions, and BODY stands for any `awk' statement.

   The `for' statement starts by executing INITIALIZATION.  Then, as
long as the CONDITION is true, it repeatedly executes BODY and then
INCREMENT.  Typically, INITIALIZATION sets a variable to either zero or
one, INCREMENT adds one to it, and CONDITION compares it against the
desired number of iterations.  For example:

     awk '{ for (i = 1; i <= 3; i++)
               print $i
     }' inventory-shipped

This prints the first three fields of each input record, with one field
per line.

   It isn't possible to set more than one variable in the
INITIALIZATION part without using a multiple assignment statement such
as `x = y = 0'. This makes sense only if all the initial values are
equal.  (But it is possible to initialize additional variables by
writing their assignments as separate statements preceding the `for'
loop.)

   The same is true of the INCREMENT part. Incrementing additional
variables requires separate statements at the end of the loop.  The C
compound expression, using C's comma operator, is useful in this
context but it is not supported in `awk'.

   Most often, INCREMENT is an increment expression, as in the previous
example.  But this is not required; it can be any expression
whatsoever.  For example, the following statement prints all the powers
of two between 1 and 100:

     for (i = 1; i <= 100; i *= 2)
       print i

   If there is nothing to be done, any of the three expressions in the
parentheses following the `for' keyword may be omitted.  Thus,
`for (; x > 0;)' is equivalent to `while (x > 0)'.  If the CONDITION is
omitted, it is treated as true, effectively yielding an "infinite loop"
(i.e., a loop that never terminates).

   In most cases, a `for' loop is an abbreviation for a `while' loop,
as shown here:

     INITIALIZATION
     while (CONDITION) {
       BODY
       INCREMENT
     }

The only exception is when the `continue' statement (*note The
`continue' Statement: Continue Statement.) is used inside the loop.
Changing a `for' statement to a `while' statement in this way can
change the effect of the `continue' statement inside the loop.

   The `awk' language has a `for' statement in addition to a `while'
statement because a `for' loop is often both less work to type and more
natural to think of.  Counting the number of iterations is very common
in loops.  It can be easier to think of this counting as part of
looping rather than as something to do inside the loop.

   There is an alternate version of the `for' loop, for iterating over
all the indices of an array:

     for (i in array)
         DO SOMETHING WITH array[i]

*Note Scanning All Elements of an Array: Scanning an Array, for more
information on this version of the `for' loop.


File: gawk.info,  Node: Break Statement,  Next: Continue Statement,  Prev: For Statement,  Up: Statements

The `break' Statement
---------------------

   The `break' statement jumps out of the innermost `for', `while', or
`do' loop that encloses it.  The following example finds the smallest
divisor of any integer, and also identifies prime numbers:

     # find smallest divisor of num
     {
        num = $1
        for (div = 2; div*div <= num; div++)
          if (num % div == 0)
            break
        if (num % div == 0)
          printf "Smallest divisor of %d is %d\n", num, div
        else
          printf "%d is prime\n", num
     }

   When the remainder is zero in the first `if' statement, `awk'
immediately "breaks out" of the containing `for' loop.  This means that
`awk' proceeds immediately to the statement following the loop and
continues processing.  (This is very different from the `exit'
statement, which stops the entire `awk' program.  *Note The `exit'
Statement: Exit Statement.)

   Th following program illustrates how the CONDITION of a `for' or
`while' statement could be replaced with a `break' inside an `if':

     # find smallest divisor of num
     {
       num = $1
       for (div = 2; ; div++) {
         if (num % div == 0) {
           printf "Smallest divisor of %d is %d\n", num, div
           break
         }
         if (div*div > num) {
           printf "%d is prime\n", num
           break
         }
       }
     }

   The `break' statement has no meaning when used outside the body of a
loop.  However, although it was never documented, historical
implementations of `awk' treated the `break' statement outside of a
loop as if it were a `next' statement (*note The `next' Statement: Next
Statement.).  Recent versions of Unix `awk' no longer allow this usage.
`gawk' supports this use of `break' only if `--traditional' has been
specified on the command line (*note Command-Line Options: Options.).
Otherwise, it is treated as an error, since the POSIX standard
specifies that `break' should only be used inside the body of a loop.
(d.c.)


File: gawk.info,  Node: Continue Statement,  Next: Next Statement,  Prev: Break Statement,  Up: Statements

The `continue' Statement
------------------------

   As with `break', the `continue' statement is used only inside `for',
`while', and `do' loops.  It skips over the rest of the loop body,
causing the next cycle around the loop to begin immediately.  Contrast
this with `break', which jumps out of the loop altogether.

   The `continue' statement in a `for' loop directs `awk' to skip the
rest of the body of the loop and resume execution with the
increment-expression of the `for' statement.  The following program
illustrates this fact:

     BEGIN {
          for (x = 0; x <= 20; x++) {
              if (x == 5)
                  continue
              printf "%d ", x
          }
          print ""
     }

This program prints all the numbers from 0 to 20--except for 5, for
which the `printf' is skipped.  Because the increment `x++' is not
skipped, `x' does not remain stuck at 5.  Contrast the `for' loop from
the previous example with the following `while' loop:

     BEGIN {
          x = 0
          while (x <= 20) {
              if (x == 5)
                  continue
              printf "%d ", x
              x++
          }
          print ""
     }

This program loops forever once `x' reaches 5.

   The `continue' statement has no meaning when used outside the body of
a loop.  Historical versions of `awk' treated a `continue' statement
outside a loop the same way they treated a `break' statement outside a
loop: as if it were a `next' statement (*note The `next' Statement:
Next Statement.).  Recent versions of Unix `awk' no longer work this
way, and `gawk' allows it only if `--traditional' is specified on the
command line (*note Command-Line Options: Options.).  Just like the
`break' statement, the POSIX standard specifies that `continue' should
only be used inside the body of a loop.  (d.c.)


File: gawk.info,  Node: Next Statement,  Next: Nextfile Statement,  Prev: Continue Statement,  Up: Statements

The `next' Statement
--------------------

   The `next' statement forces `awk' to immediately stop processing the
current record and go on to the next record.  This means that no
further rules are executed for the current record, and the rest of the
current rule's action isn't executed.

   Contrast this with the effect of the `getline' function (*note
Explicit Input with `getline': Getline.).  That also causes `awk' to
read the next record immediately, but it does not alter the flow of
control in any way (i.e., the rest of the current action executes with
a new input record).

   At the highest level, `awk' program execution is a loop that reads
an input record and then tests each rule's pattern against it.  If you
think of this loop as a `for' statement whose body contains the rules,
then the `next' statement is analogous to a `continue' statement. It
skips to the end of the body of this implicit loop and executes the
increment (which reads another record).

   For example, suppose an `awk' program works only on records with
four fields, and it shouldn't fail when given bad input.  To avoid
complicating the rest of the program, write a "weed out" rule near the
beginning, in the following manner:

     NF != 4 {
       err = sprintf("%s:%d: skipped: NF != 4\n", FILENAME, FNR)
       print err > "/dev/stderr"
       next
     }

Because of the `next' statement, the program's subsequent rules won't
see the bad record.  The error message is redirected to the standard
error output stream, as error messages should be.  For more detail see
*Note Special File Names in `gawk': Special Files.

   According to the POSIX standard, the behavior is undefined if the
`next' statement is used in a `BEGIN' or `END' rule.  `gawk' treats it
as a syntax error.  Although POSIX permits it, some other `awk'
implementations don't allow the `next' statement inside function bodies
(*note User-Defined Functions: User-defined.).  Just as with any other
`next' statement, a `next' statement inside a function body reads the
next record and starts processing it with the first rule in the program.
If the `next' statement causes the end of the input to be reached, then
the code in any `END' rules is executed.  *Note The `BEGIN' and `END'
Special Patterns: BEGIN/END.


File: gawk.info,  Node: Nextfile Statement,  Next: Exit Statement,  Prev: Next Statement,  Up: Statements

Using `gawk''s `nextfile' Statement
-----------------------------------

   `gawk' provides the `nextfile' statement, which is similar to the
`next' statement.  However, instead of abandoning processing of the
current record, the `nextfile' statement instructs `gawk' to stop
processing the current data file.

   The `nextfile' statement is a `gawk' extension.  In most other `awk'
implementations, or if `gawk' is in compatibility mode (*note
Command-Line Options: Options.), `nextfile' is not special.

   Upon execution of the `nextfile' statement, `FILENAME' is updated to
the name of the next data file listed on the command line, `FNR' is
reset to one, `ARGIND' is incremented, and processing starts over with
the first rule in the program.  (`ARGIND' hasn't been introduced yet.
*Note Built-in Variables::.)  If the `nextfile' statement causes the
end of the input to be reached, then the code in any `END' rules is
executed.  *Note The `BEGIN' and `END' Special Patterns: BEGIN/END.

   The `nextfile' statement is useful when there are many data files to
process but it isn't necessary to process every record in every file.
Normally, in order to move on to the next data file, a program has to
continue scanning the unwanted records.  The `nextfile' statement
accomplishes this much more efficiently.

   While one might think that `close(FILENAME)' would accomplish the
same as `nextfile', this isn't true.  `close' is reserved for closing
files, pipes, and coprocesses that are opened with redirections.  It is
not related to the main processing that `awk' does with the files
listed in `ARGV'.

   If it's necessary to use an `awk' version that doesn't support
`nextfile', see *Note Implementing `nextfile' as a Function: Nextfile
Function, for a user-defined function that simulates the `nextfile'
statement.

   The current version of the Bell Laboratories `awk' (*note Other
Freely Available `awk' Implementations: Other Versions.)  also supports
`nextfile'.  However, it doesn't allow the `nextfile' statement inside
function bodies (*note User-Defined Functions: User-defined.).  `gawk'
does; a `nextfile' inside a function body reads the next record and
starts processing it with the first rule in the program, just as any
other `nextfile' statement.

   *Caution:*  Versions of `gawk' prior to 3.0 used two words (`next
file') for the `nextfile' statement.  In version 3.0, this was changed
to one word, because the treatment of `file' was inconsistent. When it
appeared after `next', `file' was a keyword; otherwise, it was a
regular identifier.  The old usage is no longer accepted; `next file'
generates a syntax error.


File: gawk.info,  Node: Exit Statement,  Prev: Nextfile Statement,  Up: Statements

The `exit' Statement
--------------------

   The `exit' statement causes `awk' to immediately stop executing the
current rule and to stop processing input; any remaining input is
ignored.  The `exit' statement is written as follows:

     exit [RETURN CODE]

   When an `exit' statement is executed from a `BEGIN' rule, the
program stops processing everything immediately.  No input records are
read.  However, if an `END' rule is present, as part of executing the
`exit' statement, the `END' rule is executed (*note The `BEGIN' and
`END' Special Patterns: BEGIN/END.).  If `exit' is used as part of an
`END' rule, it causes the program to stop immediately.

   An `exit' statement that is not part of a `BEGIN' or `END' rule
stops the execution of any further automatic rules for the current
record, skips reading any remaining input records, and executes the
`END' rule if there is one.

   In such a case, if you don't want the `END' rule to do its job, set
a variable to nonzero before the `exit' statement and check that
variable in the `END' rule.  *Note Assertions: Assert Function, for an
example that does this.

   If an argument is supplied to `exit', its value is used as the exit
status code for the `awk' process.  If no argument is supplied, `exit'
returns status zero (success).  In the case where an argument is
supplied to a first `exit' statement, and then `exit' is called a
second time from an `END' rule with no argument, `awk' uses the
previously supplied exit value.  (d.c.)

   For example, suppose an error condition occurs that is difficult or
impossible to handle.  Conventionally, programs report this by exiting
with a nonzero status.  An `awk' program can do this using an `exit'
statement with a nonzero argument, as shown in the following example:

     BEGIN {
            if (("date" | getline date_now) <= 0) {
              print "Can't get system date" > "/dev/stderr"
              exit 1
            }
            print "current date is", date_now
            close("date")
     }


File: gawk.info,  Node: Built-in Variables,  Prev: Statements,  Up: Patterns and Actions

Built-in Variables
==================

   Most `awk' variables are available to use for your own purposes;
they never change unless your program assigns values to them, and they
never affect anything unless your program examines them.  However, a
few variables in `awk' have special built-in meanings.  `awk' examines
some of these automatically, so that they enable you to tell `awk' how
to do certain things.  Others are set automatically by `awk', so that
they carry information from the internal workings of `awk' to your
program.

   This minor node documents all the built-in variables of `gawk', most
of which are also documented in the chapters describing their areas of
activity.

* Menu:

* User-modified::               Built-in variables that you change to control
                                `awk'.
* Auto-set::                    Built-in variables where `awk' gives
                                you information.
* ARGC and ARGV::               Ways to use `ARGC' and `ARGV'.


File: gawk.info,  Node: User-modified,  Next: Auto-set,  Prev: Built-in Variables,  Up: Built-in Variables

Built-in Variables That Control `awk'
-------------------------------------

   The following is an alphabetical list of variables that you can
change to control how `awk' does certain things. The variables that are
specific to `gawk' are marked with a pound sign (`#').

`BINMODE #'
     On non-POSIX systems, this variable specifies use of binary mode
     for all I/O.  Numeric values of one, two, or three specify that
     input files, output files, or all files, respectively, should use
     binary I/O.  Alternatively, string values of `"r"' or `"w"'
     specify that input files and output files, respectively, should
     use binary I/O.  A string value of `"rw"' or `"wr"' indicates that
     all files should use binary I/O.  Any other string value is
     equivalent to `"rw"', but `gawk' generates a warning message.
     `BINMODE' is described in more detail in *Note Using `gawk' on PC
     Operating Systems: PC Using.

     This variable is a `gawk' extension.  In other `awk'
     implementations (except `mawk', *note Other Freely Available `awk'
     Implementations: Other Versions.), or if `gawk' is in
     compatibility mode (*note Command-Line Options: Options.), it is
     not special.

`CONVFMT'
     This string controls conversion of numbers to strings (*note
     Conversion of Strings and Numbers: Conversion.).  It works by
     being passed, in effect, as the first argument to the `sprintf'
     function (*note String Manipulation Functions: String Functions.).
     Its default value is `"%.6g"'.  `CONVFMT' was introduced by the
     POSIX standard.

`FIELDWIDTHS #'
     This is a space-separated list of columns that tells `gawk' how to
     split input with fixed columnar boundaries.  Assigning a value to
     `FIELDWIDTHS' overrides the use of `FS' for field splitting.
     *Note Reading Fixed-Width Data: Constant Size, for more
     information.

     If `gawk' is in compatibility mode (*note Command-Line Options:
     Options.), then `FIELDWIDTHS' has no special meaning, and
     field-splitting operations occur based exclusively on the value of
     `FS'.

`FS'
     This is the input field separator (*note Specifying How Fields Are
     Separated: Field Separators.).  The value is a single-character
     string or a multi-character regular expression that matches the
     separations between fields in an input record.  If the value is
     the null string (`""'), then each character in the record becomes
     a separate field.  (This behavior is a `gawk' extension. POSIX
     `awk' does not specify the behavior when `FS' is the null string.)

     The default value is `" "', a string consisting of a single space.
     As a special exception, this value means that any sequence of
     spaces, tabs, and/or newlines is a single separator.(1)  It also
     causes spaces, tabs, and newlines at the beginning and end of a
     record to be ignored.

     You can set the value of `FS' on the command line using the `-F'
     option:

          awk -F, 'PROGRAM' INPUT-FILES

     If `gawk' is using `FIELDWIDTHS' for field splitting, assigning a
     value to `FS' causes `gawk' to return to the normal, `FS'-based
     field splitting. An easy way to do this is to simply say `FS =
     FS', perhaps with an explanatory comment.

`IGNORECASE #'
     If `IGNORECASE' is nonzero or non-null, then all string comparisons
     and all regular expression matching are case independent.  Thus,
     regexp matching with `~' and `!~', as well as the `gensub',
     `gsub', `index', `match', `split', and `sub' functions, record
     termination with `RS', and field splitting with `FS', all ignore
     case when doing their particular regexp operations.  However, the
     value of `IGNORECASE' does _not_ affect array subscripting.  *Note
     Case Sensitivity in Matching: Case-sensitivity.

     If `gawk' is in compatibility mode (*note Command-Line Options:
     Options.), then `IGNORECASE' has no special meaning.  Thus, string
     and regexp operations are always case-sensitive.

`LINT #'
     When this variable is true (nonzero or non-null), `gawk' behaves
     as if the `--lint' command-line option is in effect.  (*note
     Command-Line Options: Options.).  With a value of `"fatal"', lint
     warnings become fatal errors.  Any other true value prints
     nonfatal warnings.  Assigning a false value to `LINT' turns off
     the lint warnings.

     This variable is a `gawk' extension.  It is not special in other
     `awk' implementations.  Unlike the other special variables,
     changing `LINT' does affect the production of lint warnings, even
     if `gawk' is in compatibility mode.  Much as the `--lint' and
     `--traditional' options independently control different aspects of
     `gawk''s behavior, the control of lint warnings during program
     execution is independent of the flavor of `awk' being executed.

`OFMT'
     This string controls conversion of numbers to strings (*note
     Conversion of Strings and Numbers: Conversion.) for printing with
     the `print' statement.  It works by being passed as the first
     argument to the `sprintf' function (*note String Manipulation
     Functions: String Functions.).  Its default value is `"%.6g"'.
     Earlier versions of `awk' also used `OFMT' to specify the format
     for converting numbers to strings in general expressions; this is
     now done by `CONVFMT'.

`OFS'
     This is the output field separator (*note Output Separators::).
     It is output between the fields printed by a `print' statement.
     Its default value is `" "', a string consisting of a single space.

`ORS'
     This is the output record separator.  It is output at the end of
     every `print' statement.  Its default value is `"\n"', the newline
     character.  (*Note Output Separators::.)

`RS'
     This is `awk''s input record separator.  Its default value is a
     string containing a single newline character, which means that an
     input record consists of a single line of text.  It can also be
     the null string, in which case records are separated by runs of
     blank lines.  If it is a regexp, records are separated by matches
     of the regexp in the input text.  (*Note How Input Is Split into
     Records: Records.)

     The ability for `RS' to be a regular expression is a `gawk'
     extension.  In most other `awk' implementations, or if `gawk' is
     in compatibility mode (*note Command-Line Options: Options.), just
     the first character of `RS''s value is used.

`SUBSEP'
     This is the subscript separator.  It has the default value of
     `"\034"' and is used to separate the parts of the indices of a
     multidimensional array.  Thus, the expression `foo["A", "B"]'
     really accesses `foo["A\034B"]' (*note Multidimensional Arrays:
     Multi-dimensional.).

`TEXTDOMAIN #'
     This variable is used for internationalization of programs at the
     `awk' level.  It sets the default text domain for specially marked
     string constants in the source text, as well as for the
     `dcgettext', `dcngettext' and `bindtextdomain' functions (*note
     Internationalization with `gawk': Internationalization.).  The
     default value of `TEXTDOMAIN' is `"messages"'.

     This variable is a `gawk' extension.  In other `awk'
     implementations, or if `gawk' is in compatibility mode (*note
     Command-Line Options: Options.), it is not special.

   ---------- Footnotes ----------

   (1) In POSIX `awk', newline does not count as whitespace.


File: gawk.info,  Node: Auto-set,  Next: ARGC and ARGV,  Prev: User-modified,  Up: Built-in Variables

Built-in Variables That Convey Information
------------------------------------------

   The following is an alphabetical list of variables that `awk' sets
automatically on certain occasions in order to provide information to
your program.  The variables that are specific to `gawk' are marked
with an asterisk (`*').

`ARGC, ARGV'
     The command-line arguments available to `awk' programs are stored
     in an array called `ARGV'.  `ARGC' is the number of command-line
     arguments present.  *Note Other Command-Line Arguments: Other
     Arguments.  Unlike most `awk' arrays, `ARGV' is indexed from 0 to
     `ARGC' - 1.  In the following example:

          $ awk 'BEGIN {
          >         for (i = 0; i < ARGC; i++)
          >             print ARGV[i]
          >      }' inventory-shipped BBS-list
          -| awk
          -| inventory-shipped
          -| BBS-list

     `ARGV[0]' contains `"awk"', `ARGV[1]' contains
     `"inventory-shipped"', and `ARGV[2]' contains `"BBS-list"'.  The
     value of `ARGC' is three, one more than the index of the last
     element in `ARGV', because the elements are numbered from zero.

     The names `ARGC' and `ARGV', as well as the convention of indexing
     the array from 0 to `ARGC' - 1, are derived from the C language's
     method of accessing command-line arguments.

     The value of `ARGV[0]' can vary from system to system.  Also, you
     should note that the program text is _not_ included in `ARGV', nor
     are any of `awk''s command-line options.  *Note Using `ARGC' and
     `ARGV': ARGC and ARGV, for information about how `awk' uses these
     variables.

`ARGIND #'
     The index in `ARGV' of the current file being processed.  Every
     time `gawk' opens a new data file for processing, it sets `ARGIND'
     to the index in `ARGV' of the file name.  When `gawk' is
     processing the input files, `FILENAME == ARGV[ARGIND]' is always
     true.

     This variable is useful in file processing; it allows you to tell
     how far along you are in the list of data files as well as to
     distinguish between successive instances of the same file name on
     the command line.

     While you can change the value of `ARGIND' within your `awk'
     program, `gawk' automatically sets it to a new value when the next
     file is opened.

     This variable is a `gawk' extension.  In other `awk'
     implementations, or if `gawk' is in compatibility mode (*note
     Command-Line Options: Options.), it is not special.

`ENVIRON'
     An associative array that contains the values of the environment.
     The array indices are the environment variable names; the elements
     are the values of the particular environment variables.  For
     example, `ENVIRON["HOME"]' might be `/home/arnold'.  Changing this
     array does not affect the environment passed on to any programs
     that `awk' may spawn via redirection or the `system' function.

     Some operating systems may not have environment variables.  On
     such systems, the `ENVIRON' array is empty (except for
     `ENVIRON["AWKPATH"]', *note The `AWKPATH' Environment Variable:
     AWKPATH Variable.).

`ERRNO #'
     If a system error occurs during a redirection for `getline',
     during a read for `getline', or during a `close' operation, then
     `ERRNO' contains a string describing the error.

     This variable is a `gawk' extension.  In other `awk'
     implementations, or if `gawk' is in compatibility mode (*note
     Command-Line Options: Options.), it is not special.

`FILENAME'
     The name of the file that `awk' is currently reading.  When no
     data files are listed on the command line, `awk' reads from the
     standard input and `FILENAME' is set to `"-"'.  `FILENAME' is
     changed each time a new file is read (*note Reading Input Files:
     Reading Files.).  Inside a `BEGIN' rule, the value of `FILENAME' is
     `""', since there are no input files being processed yet.(1)
     (d.c.)  Note, though, that using `getline' (*note Explicit Input
     with `getline': Getline.)  inside a `BEGIN' rule can give
     `FILENAME' a value.

`FNR'
     The current record number in the current file.  `FNR' is
     incremented each time a new record is read (*note Explicit Input
     with `getline': Getline.).  It is reinitialized to zero each time
     a new input file is started.

`NF'
     The number of fields in the current input record.  `NF' is set
     each time a new record is read, when a new field is created or
     when `$0' changes (*note Examining Fields: Fields.).

`NR'
     The number of input records `awk' has processed since the
     beginning of the program's execution (*note How Input Is Split
     into Records: Records.).  `NR' is incremented each time a new
     record is read.

`PROCINFO #'
     The elements of this array provide access to information about the
     running `awk' program.  The following elements (listed
     alphabetically) are guaranteed to be available:

    `PROCINFO["egid"]'
          The value of the `getegid' system call.

    `PROCINFO["euid"]'
          The value of the `geteuid' system call.

    `PROCINFO["FS"]'
          This is `"FS"' if field splitting with `FS' is in effect, or
          it is `"FIELDWIDTHS"' if field splitting with `FIELDWIDTHS'
          is in effect.

    `PROCINFO["gid"]'
          The value of the `getgid' system call.

    `PROCINFO["pgrpid"]'
          The process group ID of the current process.

    `PROCINFO["pid"]'
          The process ID of the current process.

    `PROCINFO["ppid"]'
          The parent process ID of the current process.

    `PROCINFO["uid"]'
          The value of the `getuid' system call.

     On some systems, there may be elements in the array, `"group1"'
     through `"groupN"' for some N. N is the number of supplementary
     groups that the process has.  Use the `in' operator to test for
     these elements (*note Referring to an Array Element: Reference to
     Elements.).

     This array is a `gawk' extension.  In other `awk' implementations,
     or if `gawk' is in compatibility mode (*note Command-Line Options:
     Options.), it is not special.

`RLENGTH'
     The length of the substring matched by the `match' function (*note
     String Manipulation Functions: String Functions.).  `RLENGTH' is
     set by invoking the `match' function.  Its value is the length of
     the matched string, or -1 if no match is found.

`RSTART'
     The start-index in characters of the substring that is matched by
     the `match' function (*note String Manipulation Functions: String
     Functions.).  `RSTART' is set by invoking the `match' function.
     Its value is the position of the string where the matched
     substring starts, or zero if no match was found.

`RT #'
     This is set each time a record is read. It contains the input text
     that matched the text denoted by `RS', the record separator.

     This variable is a `gawk' extension.  In other `awk'
     implementations, or if `gawk' is in compatibility mode (*note
     Command-Line Options: Options.), it is not special.

Advanced Notes: Changing `NR' and `FNR'
---------------------------------------

   `awk' increments `NR' and `FNR' each time it reads a record, instead
of setting them to the absolute value of the number of records read.
This means that a program can change these variables and their new
values are incremented for each record.  (d.c.)  This is demonstrated
in the following example:

     $ echo '1
     > 2
     > 3
     > 4' | awk 'NR == 2 { NR = 17 }
     > { print NR }'
     -| 1
     -| 17
     -| 18
     -| 19

Before `FNR' was added to the `awk' language (*note Major Changes
Between V7 and SVR3.1: V7/SVR3.1.), many `awk' programs used this
feature to track the number of records in a file by resetting `NR' to
zero when `FILENAME' changed.

   ---------- Footnotes ----------

   (1) Some early implementations of Unix `awk' initialized `FILENAME'
to `"-"', even if there were data files to be processed. This behavior
was incorrect and should not be relied upon in your programs.


File: gawk.info,  Node: ARGC and ARGV,  Prev: Auto-set,  Up: Built-in Variables

Using `ARGC' and `ARGV'
-----------------------

   *Note Built-in Variables That Convey Information: Auto-set,
presented the following program describing the information contained in
`ARGC' and `ARGV':

     $ awk 'BEGIN {
     >        for (i = 0; i < ARGC; i++)
     >            print ARGV[i]
     >      }' inventory-shipped BBS-list
     -| awk
     -| inventory-shipped
     -| BBS-list

In this example, `ARGV[0]' contains `awk', `ARGV[1]' contains
`inventory-shipped', and `ARGV[2]' contains `BBS-list'.  Notice that
the `awk' program is not entered in `ARGV'.  The other special
command-line options, with their arguments, are also not entered.  This
includes variable assignments done with the `-v' option (*note
Command-Line Options: Options.).  Normal variable assignments on the
command line _are_ treated as arguments and do show up in the `ARGV'
array:

     $ cat showargs.awk
     -| BEGIN {
     -|     printf "A=%d, B=%d\n", A, B
     -|     for (i = 0; i < ARGC; i++)
     -|         printf "\tARGV[%d] = %s\n", i, ARGV[i]
     -| }
     -| END   { printf "A=%d, B=%d\n", A, B }
     $ awk -v A=1 -f showargs.awk B=2 /dev/null
     -| A=1, B=0
     -|        ARGV[0] = awk
     -|        ARGV[1] = B=2
     -|        ARGV[2] = /dev/null
     -| A=1, B=2

   A program can alter `ARGC' and the elements of `ARGV'.  Each time
`awk' reaches the end of an input file, it uses the next element of
`ARGV' as the name of the next input file.  By storing a different
string there, a program can change which files are read.  Use `"-"' to
represent the standard input.  Storing additional elements and
incrementing `ARGC' causes additional files to be read.

   If the value of `ARGC' is decreased, that eliminates input files
from the end of the list.  By recording the old value of `ARGC'
elsewhere, a program can treat the eliminated arguments as something
other than file names.

   To eliminate a file from the middle of the list, store the null
string (`""') into `ARGV' in place of the file's name.  As a special
feature, `awk' ignores file names that have been replaced with the null
string.  Another option is to use the `delete' statement to remove
elements from `ARGV' (*note The `delete' Statement: Delete.).

   All of these actions are typically done in the `BEGIN' rule, before
actual processing of the input begins.  *Note Splitting a Large File
into Pieces: Split Program, and see *Note Duplicating Output into
Multiple Files: Tee Program, for examples of each way of removing
elements from `ARGV'.  The following fragment processes `ARGV' in order
to examine, and then remove, command-line options:

     BEGIN {
         for (i = 1; i < ARGC; i++) {
             if (ARGV[i] == "-v")
                 verbose = 1
             else if (ARGV[i] == "-d")
                 debug = 1
             else if (ARGV[i] ~ /^-?/) {
                 e = sprintf("%s: unrecognized option -- %c",
                         ARGV[0], substr(ARGV[i], 1, ,1))
                 print e > "/dev/stderr"
             } else
                 break
             delete ARGV[i]
         }
     }

   To actually get the options into the `awk' program, end the `awk'
options with `--' and then supply the `awk' program's options, in the
following manner:

     awk -f myprog -- -v -d file1 file2 ...

   This is not necessary in `gawk'. Unless `--posix' has been
specified, `gawk' silently puts any unrecognized options into `ARGV'
for the `awk' program to deal with.  As soon as it sees an unknown
option, `gawk' stops looking for other options that it might otherwise
recognize.  The previous example with `gawk' would be:

     gawk -f myprog -d -v file1 file2 ...

Because `-d' is not a valid `gawk' option, it and the following `-v'
are passed on to the `awk' program.


File: gawk.info,  Node: Arrays,  Next: Functions,  Prev: Patterns and Actions,  Up: Top

Arrays in `awk'
***************

   An "array" is a table of values called "elements".  The elements of
an array are distinguished by their indices.  "Indices" may be either
numbers or strings.

   This major node describes how arrays work in `awk', how to use array
elements, how to scan through every element in an array, and how to
remove array elements.  It also describes how `awk' simulates
multidimensional arrays, as well as some of the less obvious points
about array usage.  The major node finishes with a discussion of
`gawk''s facility for sorting an array based on its indices.

   `awk' maintains a single set of names that may be used for naming
variables, arrays, and functions (*note User-Defined Functions:
User-defined.).  Thus, you cannot have a variable and an array with the
same name in the same `awk' program.

* Menu:

* Array Intro::                 Introduction to Arrays
* Reference to Elements::       How to examine one element of an array.
* Assigning Elements::          How to change an element of an array.
* Array Example::               Basic Example of an Array
* Scanning an Array::           A variation of the `for' statement. It
                                loops through the indices of an array's
                                existing elements.
* Delete::                      The `delete' statement removes an element
                                from an array.
* Numeric Array Subscripts::    How to use numbers as subscripts in
                                `awk'.
* Uninitialized Subscripts::    Using Uninitialized variables as subscripts.
* Multi-dimensional::           Emulating multidimensional arrays in
                                `awk'.
* Multi-scanning::              Scanning multidimensional arrays.
* Array Sorting::               Sorting array values and indices.


File: gawk.info,  Node: Array Intro,  Next: Reference to Elements,  Prev: Arrays,  Up: Arrays

Introduction to Arrays
======================

   The `awk' language provides one-dimensional arrays for storing
groups of related strings or numbers.  Every `awk' array must have a
name.  Array names have the same syntax as variable names; any valid
variable name would also be a valid array name.  But one name cannot be
used in both ways (as an array and as a variable) in the same `awk'
program.

   Arrays in `awk' superficially resemble arrays in other programming
languages, but there are fundamental differences.  In `awk', it isn't
necessary to specify the size of an array before starting to use it.
Additionally, any number or string in `awk', not just consecutive
integers, may be used as an array index.

   In most other languages, arrays must be "declared" before use,
including a specification of how many elements or components they
contain.  In such languages, the declaration causes a contiguous block
of memory to be allocated for that many elements.  Usually, an index in
the array must be a positive integer.  For example, the index zero
specifies the first element in the array, which is actually stored at
the beginning of the block of memory.  Index one specifies the second
element, which is stored in memory right after the first element, and
so on.  It is impossible to add more elements to the array, because it
has room only for as many elements as given in the declaration.  (Some
languages allow arbitrary starting and ending indices--e.g., `15 ..
27'--but the size of the array is still fixed when the array is
declared.)

   A contiguous array of four elements might look like the following
example, conceptually, if the element values are 8, `"foo"', `""', and
30:

     +---------+---------+--------+---------+
     |    8    |  "foo"  |   ""   |    30   |    Value
     +---------+---------+--------+---------+
          0         1         2         3        Index

Only the values are stored; the indices are implicit from the order of
the values. Here, 8 is the value at index zero, because 8 appears in the
position with zero elements before it.

   Arrays in `awk' are different--they are "associative".  This means
that each array is a collection of pairs: an index and its corresponding
array element value:

     Element 3     Value 30
     Element 1     Value "foo"
     Element 0     Value 8
     Element 2     Value ""

The pairs are shown in jumbled order because their order is irrelevant.

   One advantage of associative arrays is that new pairs can be added
at any time.  For example, suppose a tenth element is added to the array
whose value is `"number ten"'.  The result is:

     Element 10    Value "number ten"
     Element 3     Value 30
     Element 1     Value "foo"
     Element 0     Value 8
     Element 2     Value ""

Now the array is "sparse", which just means some indices are missing.
It has elements 0-3 and 10, but doesn't have elements 4, 5, 6, 7, 8, or
9.

   Another consequence of associative arrays is that the indices don't
have to be positive integers.  Any number, or even a string, can be an
index.  For example, the following is an array that translates words
from English to French:

     Element "dog" Value "chien"
     Element "cat" Value "chat"
     Element "one" Value "un"
     Element 1     Value "un"

Here we decided to translate the number one in both spelled-out and
numeric form--thus illustrating that a single array can have both
numbers and strings as indices.  In fact, array subscripts are always
strings; this is discussed in more detail in *Note Using Numbers to
Subscript Arrays: Numeric Array Subscripts.  Here, the number `1' isn't
double-quoted, since `awk' automatically converts it to a string.

   The value of `IGNORECASE' has no effect upon array subscripting.
The identical string value used to store an array element must be used
to retrieve it.  When `awk' creates an array (e.g., with the `split'
built-in function), that array's indices are consecutive integers
starting at one.  (*Note String Manipulation Functions: String
Functions.)

   `awk''s arrays are efficient--the time to access an element is
independent of the number of elements in the array.


File: gawk.info,  Node: Reference to Elements,  Next: Assigning Elements,  Prev: Array Intro,  Up: Arrays

Referring to an Array Element
=============================

   The principal way to use an array is to refer to one of its elements.
An array reference is an expression as follows:

     ARRAY[INDEX]

Here, ARRAY is the name of an array.  The expression INDEX is the index
of the desired element of the array.

   The value of the array reference is the current value of that array
element.  For example, `foo[4.3]' is an expression for the element of
array `foo' at index `4.3'.

   A reference to an array element that has no recorded value yields a
value of `""', the null string.  This includes elements that have not
been assigned any value as well as elements that have been deleted
(*note The `delete' Statement: Delete.).  Such a reference
automatically creates that array element, with the null string as its
value.  (In some cases, this is unfortunate, because it might waste
memory inside `awk'.)

   To determine whether an element exists in an array at a certain
index, use the following expression:

     INDEX in ARRAY

This expression tests whether the particular index exists, without the
side effect of creating that element if it is not present.  The
expression has the value one (true) if `ARRAY[INDEX]' exists and zero
(false) if it does not exist.  For example, this statement tests
whether the array `frequencies' contains the index `2':

     if (2 in frequencies)
         print "Subscript 2 is present."

   Note that this is _not_ a test of whether the array `frequencies'
contains an element whose _value_ is two.  There is no way to do that
except to scan all the elements.  Also, this _does not_ create
`frequencies[2]', while the following (incorrect) alternative does:

     if (frequencies[2] != "")
         print "Subscript 2 is present."


File: gawk.info,  Node: Assigning Elements,  Next: Array Example,  Prev: Reference to Elements,  Up: Arrays

Assigning Array Elements
========================

   Array elements can be assigned values just like `awk' variables:

     ARRAY[SUBSCRIPT] = VALUE

ARRAY is the name of an array.  The expression SUBSCRIPT is the index
of the element of the array that is assigned a value.  The expression
VALUE is the value to assign to that element of the array.


File: gawk.info,  Node: Array Example,  Next: Scanning an Array,  Prev: Assigning Elements,  Up: Arrays

Basic Array Example
===================

   The following program takes a list of lines, each beginning with a
line number, and prints them out in order of line number.  The line
numbers are not in order when they are first read--instead they are
scrambled.  This program sorts the lines by making an array using the
line numbers as subscripts.  The program then prints out the lines in
sorted order of their numbers.  It is a very simple program and gets
confused upon encountering repeated numbers, gaps, or lines that don't
begin with a number:

     {
       if ($1 > max)
         max = $1
       arr[$1] = $0
     }
     
     END {
       for (x = 1; x <= max; x++)
         print arr[x]
     }

   The first rule keeps track of the largest line number seen so far;
it also stores each line into the array `arr', at an index that is the
line's number.  The second rule runs after all the input has been read,
to print out all the lines.  When this program is run with the
following input:

     5  I am the Five man
     2  Who are you?  The new number two!
     4  . . . And four on the floor
     1  Who is number one?
     3  I three you.

Its output is:

     1  Who is number one?
     2  Who are you?  The new number two!
     3  I three you.
     4  . . . And four on the floor
     5  I am the Five man

   If a line number is repeated, the last line with a given number
overrides the others.  Gaps in the line numbers can be handled with an
easy improvement to the program's `END' rule, as follows:

     END {
       for (x = 1; x <= max; x++)
         if (x in arr)
           print arr[x]
     }


File: gawk.info,  Node: Scanning an Array,  Next: Delete,  Prev: Array Example,  Up: Arrays

Scanning All Elements of an Array
=================================

   In programs that use arrays, it is often necessary to use a loop that
executes once for each element of an array.  In other languages, where
arrays are contiguous and indices are limited to positive integers,
this is easy: all the valid indices can be found by counting from the
lowest index up to the highest.  This technique won't do the job in
`awk', because any number or string can be an array index.  So `awk'
has a special kind of `for' statement for scanning an array:

     for (VAR in ARRAY)
       BODY

This loop executes BODY once for each index in ARRAY that the program
has previously used, with the variable VAR set to that index.

   The following program uses this form of the `for' statement.  The
first rule scans the input records and notes which words appear (at
least once) in the input, by storing a one into the array `used' with
the word as index.  The second rule scans the elements of `used' to
find all the distinct words that appear in the input.  It prints each
word that is more than 10 characters long and also prints the number of
such words.  *Note String Manipulation Functions: String Functions, for
more information on the built-in function `length'.

     # Record a 1 for each word that is used at least once
     {
         for (i = 1; i <= NF; i++)
             used[$i] = 1
     }
     
     # Find number of distinct words more than 10 characters long
     END {
         for (x in used)
             if (length(x) > 10) {
                 ++num_long_words
                 print x
             }
         print num_long_words, "words longer than 10 characters"
     }

*Note Generating Word Usage Counts: Word Sorting, for a more detailed
example of this type.

   The order in which elements of the array are accessed by this
statement is determined by the internal arrangement of the array
elements within `awk' and cannot be controlled or changed.  This can
lead to problems if new elements are added to ARRAY by statements in
the loop body; it is not predictable whether the `for' loop will reach
them.  Similarly, changing VAR inside the loop may produce strange
results.  It is best to avoid such things.


File: gawk.info,  Node: Delete,  Next: Numeric Array Subscripts,  Prev: Scanning an Array,  Up: Arrays

The `delete' Statement
======================

   To remove an individual element of an array, use the `delete'
statement:

     delete ARRAY[INDEX]

   Once an array element has been deleted, any value the element once
had is no longer available. It is as if the element had never been
referred to or had been given a value.  The following is an example of
deleting elements in an array:

     for (i in frequencies)
       delete frequencies[i]

This example removes all the elements from the array `frequencies'.
Once an element is deleted, a subsequent `for' statement to scan the
array does not report that element and the `in' operator to check for
the presence of that element returns zero (i.e., false):

     delete foo[4]
     if (4 in foo)
         print "This will never be printed"

   It is important to note that deleting an element is _not_ the same
as assigning it a null value (the empty string, `""').  For example:

     foo[4] = ""
     if (4 in foo)
       print "This is printed, even though foo[4] is empty"

   It is not an error to delete an element that does not exist.  If
`--lint' is provided on the command line (*note Command-Line Options:
Options.), `gawk' issues a warning message when an element that is not
in the array is deleted.

   All the elements of an array may be deleted with a single statement
by leaving off the subscript in the `delete' statement, as follows:

     delete ARRAY

   This ability is a `gawk' extension; it is not available in
compatibility mode (*note Command-Line Options: Options.).

   Using this version of the `delete' statement is about three times
more efficient than the equivalent loop that deletes each element one
at a time.

   The following statement provides a portable but nonobvious way to
clear out an array:(1)

     split("", array)

   The `split' function (*note String Manipulation Functions: String
Functions.)  clears out the target array first. This call asks it to
split apart the null string. Because there is no data to split out, the
function simply clears the array and then returns.

   *Caution:* Deleting an array does not change its type; you cannot
delete an array and then use the array's name as a scalar (i.e., a
regular variable). For example, the following does not work:

     a[1] = 3; delete a; a = 3

   ---------- Footnotes ----------

   (1) Thanks to Michael Brennan for pointing this out.


File: gawk.info,  Node: Numeric Array Subscripts,  Next: Uninitialized Subscripts,  Prev: Delete,  Up: Arrays

Using Numbers to Subscript Arrays
=================================

   An important aspect about arrays to remember is that _array
subscripts are always strings_.  When a numeric value is used as a
subscript, it is converted to a string value before being used for
subscripting (*note Conversion of Strings and Numbers: Conversion.).
This means that the value of the built-in variable `CONVFMT' can affect
how your program accesses elements of an array.  For example:

     xyz = 12.153
     data[xyz] = 1
     CONVFMT = "%2.2f"
     if (xyz in data)
         printf "%s is in data\n", xyz
     else
         printf "%s is not in data\n", xyz

This prints `12.15 is not in data'.  The first statement gives `xyz' a
numeric value.  Assigning to `data[xyz]' subscripts `data' with the
string value `"12.153"' (using the default conversion value of
`CONVFMT', `"%.6g"').  Thus, the array element `data["12.153"]' is
assigned the value one.  The program then changes the value of
`CONVFMT'.  The test `(xyz in data)' generates a new string value from
`xyz'--this time `"12.15"'--because the value of `CONVFMT' only allows
two significant digits.  This test fails, since `"12.15"' is a
different string from `"12.153"'.

   According to the rules for conversions (*note Conversion of Strings
and Numbers: Conversion.), integer values are always converted to
strings as integers, no matter what the value of `CONVFMT' may happen
to be.  So the usual case of the following works:

     for (i = 1; i <= maxsub; i++)
         do something with array[i]

   The "integer values always convert to strings as integers" rule has
an additional consequence for array indexing.  Octal and hexadecimal
constants (*note Octal and Hexadecimal Numbers: Nondecimal-numbers.)
are converted internally into numbers, and their original form is
forgotten.  This means, for example, that `array[17]', `array[021]', and
`array[0x11]' all refer to the same element!

   As with many things in `awk', the majority of the time things work
as one would expect them to.  But it is useful to have a precise
knowledge of the actual rules which sometimes can have a subtle effect
on your programs.


File: gawk.info,  Node: Uninitialized Subscripts,  Next: Multi-dimensional,  Prev: Numeric Array Subscripts,  Up: Arrays

Using Uninitialized Variables as Subscripts
===========================================

   Suppose it's necessary to write a program to print the input data in
reverse order.  A reasonable attempt to do so (with some test data)
might look like this:

     $ echo 'line 1
     > line 2
     > line 3' | awk '{ l[lines] = $0; ++lines }
     > END {
     >     for (i = lines-1; i >= 0; --i)
     >        print l[i]
     > }'
     -| line 3
     -| line 2

   Unfortunately, the very first line of input data did not come out in
the output!

   At first glance, this program should have worked.  The variable
`lines' is uninitialized, and uninitialized variables have the numeric
value zero.  So, `awk' should have printed the value of `l[0]'.

   The issue here is that subscripts for `awk' arrays are _always_
strings. Uninitialized variables, when used as strings, have the value
`""', not zero.  Thus, `line 1' ends up stored in `l[""]'.  The
following version of the program works correctly:

     { l[lines++] = $0 }
     END {
         for (i = lines - 1; i >= 0; --i)
            print l[i]
     }

   Here, the `++' forces `lines' to be numeric, thus making the "old
value" numeric zero. This is then converted to `"0"' as the array
subscript.

   Even though it is somewhat unusual, the null string (`""') is a
valid array subscript.  (d.c.)  `gawk' warns about the use of the null
string as a subscript if `--lint' is provided on the command line
(*note Command-Line Options: Options.).


File: gawk.info,  Node: Multi-dimensional,  Next: Multi-scanning,  Prev: Uninitialized Subscripts,  Up: Arrays

Multidimensional Arrays
=======================

   A multidimensional array is an array in which an element is
identified by a sequence of indices instead of a single index.  For
example, a two-dimensional array requires two indices.  The usual way
(in most languages, including `awk') to refer to an element of a
two-dimensional array named `grid' is with `grid[X,Y]'.

   Multidimensional arrays are supported in `awk' through concatenation
of indices into one string.  `awk' converts the indices into strings
(*note Conversion of Strings and Numbers: Conversion.) and concatenates
them together, with a separator between them.  This creates a single
string that describes the values of the separate indices.  The combined
string is used as a single index into an ordinary, one-dimensional
array.  The separator used is the value of the built-in variable
`SUBSEP'.

   For example, suppose we evaluate the expression `foo[5,12] = "value"'
when the value of `SUBSEP' is `"@"'.  The numbers 5 and 12 are
converted to strings and concatenated with an `@' between them,
yielding `"5@12"'; thus, the array element `foo["5@12"]' is set to
`"value"'.

   Once the element's value is stored, `awk' has no record of whether
it was stored with a single index or a sequence of indices.  The two
expressions `foo[5,12]' and `foo[5 SUBSEP 12]' are always equivalent.

   The default value of `SUBSEP' is the string `"\034"', which contains
a nonprinting character that is unlikely to appear in an `awk' program
or in most input data.  The usefulness of choosing an unlikely
character comes from the fact that index values that contain a string
matching `SUBSEP' can lead to combined strings that are ambiguous.
Suppose that `SUBSEP' is `"@"'; then `foo["a@b", "c"]' and
`foo["a", "b@c"]' are indistinguishable because both are actually
stored as `foo["a@b@c"]'.

   To test whether a particular index sequence exists in a
multidimensional array, use the same operator (`in') that is used for
single dimensional arrays.  Write the whole sequence of indices in
parentheses, separated by commas, as the left operand:

     (SUBSCRIPT1, SUBSCRIPT2, ...) in ARRAY

   The following example treats its input as a two-dimensional array of
fields; it rotates this array 90 degrees clockwise and prints the
result.  It assumes that all lines have the same number of elements:

     {
          if (max_nf < NF)
               max_nf = NF
          max_nr = NR
          for (x = 1; x <= NF; x++)
               vector[x, NR] = $x
     }
     
     END {
          for (x = 1; x <= max_nf; x++) {
               for (y = max_nr; y >= 1; --y)
                    printf("%s ", vector[x, y])
               printf("\n")
          }
     }

When given the input:

     1 2 3 4 5 6
     2 3 4 5 6 1
     3 4 5 6 1 2
     4 5 6 1 2 3

the program produces the following output:

     4 3 2 1
     5 4 3 2
     6 5 4 3
     1 6 5 4
     2 1 6 5
     3 2 1 6


File: gawk.info,  Node: Multi-scanning,  Next: Array Sorting,  Prev: Multi-dimensional,  Up: Arrays

Scanning Multidimensional Arrays
================================

   There is no special `for' statement for scanning a
"multidimensional" array. There cannot be one, because, in truth, there
are no multidimensional arrays or elements--there is only a
multidimensional _way of accessing_ an array.

   However, if your program has an array that is always accessed as
multidimensional, you can get the effect of scanning it by combining
the scanning `for' statement (*note Scanning All Elements of an Array:
Scanning an Array.) with the built-in `split' function (*note String
Manipulation Functions: String Functions.).  It works in the following
manner:

     for (combined in array) {
         split(combined, separate, SUBSEP)
         ...
     }

This sets the variable `combined' to each concatenated combined index
in the array, and splits it into the individual indices by breaking it
apart where the value of `SUBSEP' appears.  The individual indices then
become the elements of the array `separate'.

   Thus, if a value is previously stored in `array[1, "foo"]'; then an
element with index `"1\034foo"' exists in `array'.  (Recall that the
default value of `SUBSEP' is the character with code 034.)  Sooner or
later, the `for' statement finds that index and does an iteration with
the variable `combined' set to `"1\034foo"'.  Then the `split' function
is called as follows:

     split("1\034foo", separate, "\034")

The result is to set `separate[1]' to `"1"' and `separate[2]' to
`"foo"'.  Presto! The original sequence of separate indices is
recovered.


File: gawk.info,  Node: Array Sorting,  Prev: Multi-scanning,  Up: Arrays

Sorting Array Values and Indices with `gawk'
============================================

   The order in which an array is scanned with a `for (i in array)'
loop is essentially arbitrary.  In most `awk' implementations, sorting
an array requires writing a `sort' function.  While this can be
educational for exploring different sorting algorithms, usually that's
not the point of the program.  `gawk' provides the built-in `asort'
function (*note String Manipulation Functions: String Functions.)  that
sorts an array.  For example:

     POPULATE THE ARRAY data
     n = asort(data)
     for (i = 1; i <= n; i++)
         DO SOMETHING WITH data[i]

   After the call to `asort', the array `data' is indexed from 1 to
some number N, the total number of elements in `data'.  (This count is
`asort''s return value.)  `data[1]' <= `data[2]' <= `data[3]', and so
on.  The comparison of array elements is done using `gawk''s usual
comparison rules (*note Variable Typing and Comparison Expressions:
Typing and Comparison.).

   An important side effect of calling `asort' is that _the array's
original indices are irrevocably lost_.  As this isn't always
desirable, `asort' accepts a second argument:

     POPULATE THE ARRAY source
     n = asort(source, dest)
     for (i = 1; i <= n; i++)
         DO SOMETHING WITH dest[i]

   In this case, `gawk' copies the `source' array into the `dest' array
and then sorts `dest', destroying its indices.  However, the `source'
array is not affected.

   Often, what's needed is to sort on the values of the _indices_
instead of the values of the elements.  To do this, use a helper array
to hold the sorted index values, and then access the original array's
elements.  It works in the following way:

     POPULATE THE ARRAY data
     # copy indices
     j = 1
     for (i in data) {
         ind[j] = i    # index value becomes element value
         j++
     }
     n = asort(ind)    # index values are now sorted
     for (i = 1; i <= n; i++)
         DO SOMETHING WITH data[ind[i]]

   Sorting the array by replacing the indices provides maximal
flexibility.  To traverse the elements in decreasing order, use a loop
that goes from N down to 1, either over the elements or over the
indices.

   Copying array indices and elements isn't expensive in terms of
memory.  Internally, `gawk' maintains "reference counts" to data.  For
example, when `asort' copies the first array to the second one, there
is only one copy of the original array elements' data, even though both
arrays use the values.  Similarly, when copying the indices from `data'
to `ind', there is only one copy of the actual index strings.

   As with array subscripts, the value of `IGNORECASE' does not affect
array sorting.


File: gawk.info,  Node: Functions,  Next: Internationalization,  Prev: Arrays,  Up: Top

Functions
*********

   This major node describes `awk''s built-in functions, which fall
into three categories: numeric, string, and I/O.  `gawk' provides
additional groups of functions to work with values that represent time,
do bit manipulation, and internationalize and localize programs.

   Besides the built-in functions, `awk' has provisions for writing new
functions that the rest of a program can use.  The second half of this
major node describes these "user-defined" functions.

* Menu:

* Built-in::                    Summarizes the built-in functions.
* User-defined::                Describes User-defined functions in detail.


File: gawk.info,  Node: Built-in,  Next: User-defined,  Prev: Functions,  Up: Functions

Built-in Functions
==================

   "Built-in" functions are always available for your `awk' program to
call.  This minor node defines all the built-in functions in `awk';
some of these are mentioned in other sections but are summarized here
for your convenience.

* Menu:

* Calling Built-in::            How to call built-in functions.
* Numeric Functions::           Functions that work with numbers, including
                                `int', `sin' and `rand'.
* String Functions::            Functions for string manipulation, such as
                                `split', `match' and `sprintf'.
* I/O Functions::               Functions for files and shell commands.
* Time Functions::              Functions for dealing with timestamps.
* Bitwise Functions::           Functions for bitwise operations.
* I18N Functions::              Functions for string translation.


File: gawk.info,  Node: Calling Built-in,  Next: Numeric Functions,  Prev: Built-in,  Up: Built-in

Calling Built-in Functions
--------------------------

   To call one of `awk''s built-in functions, write the name of the
function followed by arguments in parentheses.  For example, `atan2(y +
z, 1)' is a call to the function `atan2' and has two arguments.

   Whitespace is ignored between the built-in function name and the
open parenthesis, and it is good practice to avoid using whitespace
there.  User-defined functions do not permit whitespace in this way, and
it is easier to avoid mistakes by following a simple convention that
always works--no whitespace after a function name.

   Each built-in function accepts a certain number of arguments.  In
some cases, arguments can be omitted. The defaults for omitted
arguments vary from function to function and are described under the
individual functions.  In some `awk' implementations, extra arguments
given to built-in functions are ignored.  However, in `gawk', it is a
fatal error to give extra arguments to a built-in function.

   When a function is called, expressions that create the function's
actual parameters are evaluated completely before the call is performed.
For example, in the following code fragment:

     i = 4
     j = sqrt(i++)

the variable `i' is incremented to the value five before `sqrt' is
called with a value of four for its actual parameter.  The order of
evaluation of the expressions used for the function's parameters is
undefined.  Thus, avoid writing programs that assume that parameters
are evaluated from left to right or from right to left.  For example:

     i = 5
     j = atan2(i++, i *= 2)

   If the order of evaluation is left to right, then `i' first becomes
6, and then 12, and `atan2' is called with the two arguments 6 and 12.
But if the order of evaluation is right to left, `i' first becomes 10,
then 11, and `atan2' is called with the two arguments 11 and 10.


File: gawk.info,  Node: Numeric Functions,  Next: String Functions,  Prev: Calling Built-in,  Up: Built-in

Numeric Functions
-----------------

   The following list describes all of the built-in functions that work
with numbers.  Optional parameters are enclosed in square brackets ([
]):

`int(X)'
     This returns the nearest integer to X, located between X and zero
     and truncated toward zero.

     For example, `int(3)' is 3, `int(3.9)' is 3, `int(-3.9)' is -3,
     and `int(-3)' is -3 as well.

`sqrt(X)'
     This returns the positive square root of X.  `gawk' reports an
     error if X is negative.  Thus, `sqrt(4)' is 2.

`exp(X)'
     This returns the exponential of X (`e ^ X') or reports an error if
     X is out of range.  The range of values X can have depends on your
     machine's floating-point representation.

`log(X)'
     This returns the natural logarithm of X, if X is positive;
     otherwise, it reports an error.

`sin(X)'
     This returns the sine of X, with X in radians.

`cos(X)'
     This returns the cosine of X, with X in radians.

`atan2(Y, X)'
     This returns the arctangent of `Y / X' in radians.

`rand()'
     This returns a random number.  The values of `rand' are uniformly
     distributed between zero and one.  The value is never zero and
     never one.(1)

     Often random integers are needed instead.  Following is a
     user-defined function that can be used to obtain a random
     non-negative integer less than N:

          function randint(n) {
               return int(n * rand())
          }

     The multiplication produces a random number greater than zero and
     less than `n'.  Using `int', this result is made into an integer
     between zero and `n' - 1, inclusive.

     The following example uses a similar function to produce random
     integers between one and N.  This program prints a new random
     number for each input record:

          # Function to roll a simulated die.
          function roll(n) { return 1 + int(rand() * n) }
          
          # Roll 3 six-sided dice and
          # print total number of points.
          {
                printf("%d points\n",
                       roll(6)+roll(6)+roll(6))
          }

     *Caution:* In most `awk' implementations, including `gawk', `rand'
     starts generating numbers from the same starting number, or
     "seed", each time you run `awk'.  Thus, a program generates the
     same results each time you run it.  The numbers are random within
     one `awk' run but predictable from run to run.  This is convenient
     for debugging, but if you want a program to do different things
     each time it is used, you must change the seed to a value that is
     different in each run.  To do this, use `srand'.

`srand([X])'
     The function `srand' sets the starting point, or seed, for
     generating random numbers to the value X.

     Each seed value leads to a particular sequence of random
     numbers.(2) Thus, if the seed is set to the same value a second
     time, the same sequence of random numbers is produced again.

     Different `awk' implementations use different random-number
     generators internally.  Don't expect the same `awk' program to
     produce the same series of random numbers when executed by
     different versions of `awk'.

     If the argument X is omitted, as in `srand()', then the current
     date and time of day are used for a seed.  This is the way to get
     random numbers that are truly unpredictable.

     The return value of `srand' is the previous seed.  This makes it
     easy to keep track of the seeds in case you need to consistently
     reproduce sequences of random numbers.

   ---------- Footnotes ----------

   (1) The C version of `rand' is known to produce fairly poor
sequences of random numbers.  However, nothing requires that an `awk'
implementation use the C `rand' to implement the `awk' version of
`rand'.  In fact, `gawk' uses the BSD `random' function, which is
considerably better than `rand', to produce random numbers.

   (2) Computer-generated random numbers really are not truly random.
They are technically known as "pseudorandom."  This means that while
the numbers in a sequence appear to be random, you can in fact generate
the same sequence of random numbers over and over again.


File: gawk.info,  Node: String Functions,  Next: I/O Functions,  Prev: Numeric Functions,  Up: Built-in

String-Manipulation Functions
-----------------------------

   The functions in this minor node look at or change the text of one
or more strings.  Optional parameters are enclosed in square brackets
([ ]).  Those functions that are specific to `gawk' are marked with a
pound sign (`#'):

* Menu:

* Gory Details::                More than you want to know about `\' and
                                `&' with `sub', `gsub', and
                                `gensub'.

`asort(SOURCE [, DEST]) #'
     `asort' is a `gawk'-specific extension, returning the number of
     elements in the array SOURCE.  The contents of SOURCE are sorted
     using `gawk''s normal rules for comparing values, and the indices
     of the sorted values of SOURCE are replaced with sequential
     integers starting with one. If the optional array DEST is
     specified, then SOURCE is duplicated into DEST.  DEST is then
     sorted, leaving the indices of SOURCE unchanged.  For example, if
     the contents of `a' are as follows:

          a["last"] = "de"
          a["first"] = "sac"
          a["middle"] = "cul"

     A call to `asort':

          asort(a)

     results in the following contents of `a':

          a[1] = "cul"
          a[2] = "de"
          a[3] = "sac"

     The `asort' function is described in more detail in *Note Sorting
     Array Values and Indices with `gawk': Array Sorting.  `asort' is a
     `gawk' extension; it is not available in compatibility mode (*note
     Command-Line Options: Options.).

`index(IN, FIND)'
     This searches the string IN for the first occurrence of the string
     FIND, and returns the position in characters where that occurrence
     begins in the string IN.  Consider the following example:

          $ awk 'BEGIN { print index("peanut", "an") }'
          -| 3

     If FIND is not found, `index' returns zero.  (Remember that string
     indices in `awk' start at one.)

`length([STRING])'
     This returns the number of characters in STRING.  If STRING is a
     number, the length of the digit string representing that number is
     returned.  For example, `length("abcde")' is 5.  By contrast,
     `length(15 * 35)' works out to 3. In this example, 15 * 35 = 525,
     and 525 is then converted to the string `"525"', which has three
     characters.

     If no argument is supplied, `length' returns the length of `$0'.

     *Note:* In older versions of `awk', the `length' function could be
     called without any parentheses.  Doing so is marked as
     "deprecated" in the POSIX standard.  This means that while a
     program can do this, it is a feature that can eventually be
     removed from a future version of the standard.  Therefore, for
     programs to be maximally portable, always supply the parentheses.

`match(STRING, REGEXP [, ARRAY])'
     The `match' function searches STRING for the longest, leftmost
     substring matched by the regular expression, REGEXP.  It returns
     the character position, or "index", at which that substring begins
     (one, if it starts at the beginning of STRING).  If no match is
     found, it returns zero.

     The order of the first two arguments is backwards from most other
     string functions that work with regular expressions, such as `sub'
     and `gsub'.  It might help to remember that for `match', the order
     is the same as for the `~' operator: `STRING ~ REGEXP'.

     The `match' function sets the built-in variable `RSTART' to the
     index.  It also sets the built-in variable `RLENGTH' to the length
     in characters of the matched substring.  If no match is found,
     `RSTART' is set to zero, and `RLENGTH' to -1.

     For example:

          {
                 if ($1 == "FIND")
                   regex = $2
                 else {
                   where = match($0, regex)
                   if (where != 0)
                     print "Match of", regex, "found at",
                               where, "in", $0
                 }
          }

     This program looks for lines that match the regular expression
     stored in the variable `regex'.  This regular expression can be
     changed.  If the first word on a line is `FIND', `regex' is
     changed to be the second word on that line.  Therefore, if given:

          FIND ru+n
          My program runs
          but not very quickly
          FIND Melvin
          JF+KM
          This line is property of Reality Engineering Co.
          Melvin was here.

     `awk' prints:

          Match of ru+n found at 12 in My program runs
          Match of Melvin found at 1 in Melvin was here.

     If ARRAY is present, it is cleared, and then the 0th element of
     ARRAY is set to the entire portion of STRING matched by REGEXP.
     If REGEXP contains parentheses, the integer-indexed elements of
     ARRAY are set to contain the portion of STRING matching the
     corresponding parenthesized subexpression.  For example:

          $ echo foooobazbarrrrr |
          > gawk '{ match($0, /(fo+).+(bar*)/, arr)
          >           print arr[1], arr[2] }'
          -| foooo barrrrr

     The ARRAY argument to `match' is a `gawk' extension.  In
     compatibility mode (*note Command-Line Options: Options.), using a
     third argument is a fatal error.

`split(STRING, ARRAY [, FIELDSEP])'
     This function divides STRING into pieces separated by FIELDSEP and
     stores the pieces in ARRAY.  The first piece is stored in
     `ARRAY[1]', the second piece in `ARRAY[2]', and so forth.  The
     string value of the third argument, FIELDSEP, is a regexp
     describing where to split STRING (much as `FS' can be a regexp
     describing where to split input records).  If FIELDSEP is omitted,
     the value of `FS' is used.  `split' returns the number of elements
     created.

     The `split' function splits strings into pieces in a manner
     similar to the way input lines are split into fields.  For example:

          split("cul-de-sac", a, "-")

     splits the string `cul-de-sac' into three fields using `-' as the
     separator.  It sets the contents of the array `a' as follows:

          a[1] = "cul"
          a[2] = "de"
          a[3] = "sac"

     The value returned by this call to `split' is three.

     As with input field-splitting, when the value of FIELDSEP is
     `" "', leading and trailing whitespace is ignored, and the elements
     are separated by runs of whitespace.  Also as with input
     field-splitting, if FIELDSEP is the null string, each individual
     character in the string is split into its own array element.
     (This is a `gawk'-specific extension.)

     Modern implementations of `awk', including `gawk', allow the third
     argument to be a regexp constant (`/abc/') as well as a string.
     (d.c.)  The POSIX standard allows this as well.

     Before splitting the string, `split' deletes any previously
     existing elements in the array ARRAY.  If STRING does not match
     FIELDSEP at all, ARRAY has one element only. The value of that
     element is the original STRING.

`sprintf(FORMAT, EXPRESSION1, ...)'
     This returns (without printing) the string that `printf' would
     have printed out with the same arguments (*note Using `printf'
     Statements for Fancier Printing: Printf.).  For example:

          pival = sprintf("pi = %.2f (approx.)", 22/7)

     assigns the string `"pi = 3.14 (approx.)"' to the variable `pival'.

`strtonum(STR) #'
     Examines STR and returns its numeric value.  If STR begins with a
     leading `0', `strtonum' assumes that STR is an octal number.  If
     STR begins with a leading `0x' or `0X', `strtonum' assumes that
     STR is a hexadecimal number.  For example:

          $ echo 0x11 |
          > gawk '{ printf "%d\n", strtonum($1) }'
          -| 17

     Using the `strtonum' function is _not_ the same as adding zero to
     a string value; the automatic coercion of strings to numbers works
     only for decimal data, not for octal or hexadecimal.(1)

     `strtonum' is a `gawk' extension; it is not available in
     compatibility mode (*note Command-Line Options: Options.).

`sub(REGEXP, REPLACEMENT [, TARGET])'
     The `sub' function alters the value of TARGET.  It searches this
     value, which is treated as a string, for the leftmost, longest
     substring matched by the regular expression REGEXP.  Then the
     entire string is changed by replacing the matched text with
     REPLACEMENT.  The modified string becomes the new value of TARGET.

     This function is peculiar because TARGET is not simply used to
     compute a value, and not just any expression will do--it must be a
     variable, field, or array element so that `sub' can store a
     modified value there.  If this argument is omitted, then the
     default is to use and alter `$0'.  For example:

          str = "water, water, everywhere"
          sub(/at/, "ith", str)

     sets `str' to `"wither, water, everywhere"', by replacing the
     leftmost longest occurrence of `at' with `ith'.

     The `sub' function returns the number of substitutions made (either
     one or zero).

     If the special character `&' appears in REPLACEMENT, it stands for
     the precise substring that was matched by REGEXP.  (If the regexp
     can match more than one string, then this precise substring may
     vary.)  For example:

          { sub(/candidate/, "& and his wife"); print }

     changes the first occurrence of `candidate' to `candidate and his
     wife' on each input line.  Here is another example:

          $ awk 'BEGIN {
          >         str = "daabaaa"
          >         sub(/a+/, "C&C", str)
          >         print str
          > }'
          -| dCaaCbaaa

     This shows how `&' can represent a nonconstant string and also
     illustrates the "leftmost, longest" rule in regexp matching (*note
     How Much Text Matches?: Leftmost Longest.).

     The effect of this special character (`&') can be turned off by
     putting a backslash before it in the string.  As usual, to insert
     one backslash in the string, you must write two backslashes.
     Therefore, write `\\&' in a string constant to include a literal
     `&' in the replacement.  For example, the following shows how to
     replace the first `|' on each line with an `&':

          { sub(/\|/, "\\&"); print }

     As mentioned, the third argument to `sub' must be a variable,
     field or array reference.  Some versions of `awk' allow the third
     argument to be an expression that is not an lvalue.  In such a
     case, `sub' still searches for the pattern and returns zero or
     one, but the result of the substitution (if any) is thrown away
     because there is no place to put it.  Such versions of `awk'
     accept expressions such as the following:

          sub(/USA/, "United States", "the USA and Canada")

     For historical compatibility, `gawk' accepts erroneous code, such
     as in the previous example. However, using any other nonchangeable
     object as the third parameter causes a fatal error and your program
     will not run.

     Finally, if the REGEXP is not a regexp constant, it is converted
     into a string, and then the value of that string is treated as the
     regexp to match.

`gsub(REGEXP, REPLACEMENT [, TARGET])'
     This is similar to the `sub' function, except `gsub' replaces
     _all_ of the longest, leftmost, _nonoverlapping_ matching
     substrings it can find.  The `g' in `gsub' stands for "global,"
     which means replace everywhere.  For example:

          { gsub(/Britain/, "United Kingdom"); print }

     replaces all occurrences of the string `Britain' with `United
     Kingdom' for all input records.

     The `gsub' function returns the number of substitutions made.  If
     the variable to search and alter (TARGET) is omitted, then the
     entire input record (`$0') is used.  As in `sub', the characters
     `&' and `\' are special, and the third argument must be assignable.

`gensub(REGEXP, REPLACEMENT, HOW [, TARGET]) #'
     `gensub' is a general substitution function.  Like `sub' and
     `gsub', it searches the target string TARGET for matches of the
     regular expression REGEXP.  Unlike `sub' and `gsub', the modified
     string is returned as the result of the function and the original
     target string is _not_ changed.  If HOW is a string beginning with
     `g' or `G', then it replaces all matches of REGEXP with
     REPLACEMENT.  Otherwise, HOW is treated as a number that indicates
     which match of REGEXP to replace. If no TARGET is supplied, `$0'
     is used.

     `gensub' provides an additional feature that is not available in
     `sub' or `gsub': the ability to specify components of a regexp in
     the replacement text.  This is done by using parentheses in the
     regexp to mark the components and then specifying `\N' in the
     replacement text, where N is a digit from 1 to 9.  For example:

          $ gawk '
          > BEGIN {
          >      a = "abc def"
          >      b = gensub(/(.+) (.+)/, "\\2 \\1", "g", a)
          >      print b
          > }'
          -| def abc

     As with `sub', you must type two backslashes in order to get one
     into the string.  In the replacement text, the sequence `\0'
     represents the entire matched text, as does the character `&'.

     The following example shows how you can use the third argument to
     control which match of the regexp should be changed:

          $ echo a b c a b c |
          > gawk '{ print gensub(/a/, "AA", 2) }'
          -| a b c AA b c

     In this case, `$0' is used as the default target string.  `gensub'
     returns the new string as its result, which is passed directly to
     `print' for printing.

     If the HOW argument is a string that does not begin with `g' or
     `G', or if it is a number that is less than or equal to zero, only
     one substitution is performed.  If HOW is zero, `gawk' issues a
     warning message.

     If REGEXP does not match TARGET, `gensub''s return value is the
     original unchanged value of TARGET.

     `gensub' is a `gawk' extension; it is not available in
     compatibility mode (*note Command-Line Options: Options.).

`substr(STRING, START [, LENGTH])'
     This returns a LENGTH-character-long substring of STRING, starting
     at character number START.  The first character of a string is
     character number one.(2) For example, `substr("washington", 5, 3)'
     returns `"ing"'.

     If LENGTH is not present, this function returns the whole suffix of
     STRING that begins at character number START.  For example,
     `substr("washington", 5)' returns `"ington"'.  The whole suffix is
     also returned if LENGTH is greater than the number of characters
     remaining in the string, counting from character START.

     If START is less than one or greater than the number of characters
     in the string, `substr' returns the null string.  Similarly, if
     LENGTH is present but less than or equal to zero, the null string
     is returned.

     The string returned by `substr' _cannot_ be assigned.  Thus, it is
     a mistake to attempt to change a portion of a string, as shown in
     the following example:

          string = "abcdef"
          # try to get "abCDEf", won't work
          substr(string, 3, 3) = "CDE"

     It is also a mistake to use `substr' as the third argument of
     `sub' or `gsub':

          gsub(/xyz/, "pdq", substr($0, 5, 20))  # WRONG

     (Some commercial versions of `awk' do in fact let you use `substr'
     this way, but doing so is not portable.)

     If you need to replace bits and pieces of a string, combine
     `substr' with string concatenation, in the following manner:

          string = "abcdef"
          ...
          string = substr(string, 1, 2) "CDE" substr(string, 6)

`tolower(STRING)'
     This returns a copy of STRING, with each uppercase character in
     the string replaced with its corresponding lowercase character.
     Nonalphabetic characters are left unchanged.  For example,
     `tolower("MiXeD cAsE 123")' returns `"mixed case 123"'.

`toupper(STRING)'
     This returns a copy of STRING, with each lowercase character in
     the string replaced with its corresponding uppercase character.
     Nonalphabetic characters are left unchanged.  For example,
     `toupper("MiXeD cAsE 123")' returns `"MIXED CASE 123"'.

   ---------- Footnotes ----------

   (1) Unless you use the `--non-decimal-data' option, which isn't
recommended.  *Note Allowing Nondecimal Input Data: Nondecimal Data,
for more information.

   (2) This is different from C and C++, in which the first character
is number zero.


File: gawk.info,  Node: Gory Details,  Prev: String Functions,  Up: String Functions

More About `\' and `&' with `sub', `gsub', and `gensub'
.......................................................

   When using `sub', `gsub', or `gensub', and trying to get literal
backslashes and ampersands into the replacement text, you need to
remember that there are several levels of "escape processing" going on.

   First, there is the "lexical" level, which is when `awk' reads your
program and builds an internal copy of it that can be executed.  Then
there is the runtime level, which is when `awk' actually scans the
replacement string to determine what to generate.

   At both levels, `awk' looks for a defined set of characters that can
come after a backslash.  At the lexical level, it looks for the escape
sequences listed in *Note Escape Sequences::.  Thus, for every `\' that
`awk' processes at the runtime level, type two backslashes at the
lexical level.  When a character that is not valid for an escape
sequence follows the `\', Unix `awk' and `gawk' both simply remove the
initial `\' and put the next character into the string. Thus, for
example, `"a\qb"' is treated as `"aqb"'.

   At the runtime level, the various functions handle sequences of `\'
and `&' differently.  The situation is (sadly) somewhat complex.
Historically, the `sub' and `gsub' functions treated the two character
sequence `\&' specially; this sequence was replaced in the generated
text with a single `&'.  Any other `\' within the REPLACEMENT string
that did not precede an `&' was passed through unchanged.  To
illustrate with a table:

      You type         `sub' sees          `sub' generates
      --------         ----------          ---------------
          `\&'              `&'            the matched text
         `\\&'             `\&'            a literal `&'
        `\\\&'             `\&'            a literal `&'
       `\\\\&'            `\\&'            a literal `\&'
      `\\\\\&'            `\\&'            a literal `\&'
     `\\\\\\&'           `\\\&'            a literal `\\&'
         `\\q'             `\q'            a literal `\q'

This table shows both the lexical-level processing, where an odd number
of backslashes becomes an even number at the runtime level, as well as
the runtime processing done by `sub'.  (For the sake of simplicity, the
rest of the following tables only show the case of even numbers of
backslashes entered at the lexical level.)

   The problem with the historical approach is that there is no way to
get a literal `\' followed by the matched text.

   The 1992 POSIX standard attempted to fix this problem. The standard
says that `sub' and `gsub' look for either a `\' or an `&' after the
`\'. If either one follows a `\', that character is output literally.
The interpretation of `\' and `&' then becomes:

      You type         `sub' sees          `sub' generates
      --------         ----------          ---------------
           `&'              `&'            the matched text
         `\\&'             `\&'            a literal `&'
       `\\\\&'            `\\&'            a literal `\', then the matched text
     `\\\\\\&'           `\\\&'            a literal `\&'

This appears to solve the problem.  Unfortunately, the phrasing of the
standard is unusual. It says, in effect, that `\' turns off the special
meaning of any following character, but for anything other than `\' and
`&', such special meaning is undefined.  This wording leads to two
problems:

   * Backslashes must now be doubled in the REPLACEMENT string, breaking
     historical `awk' programs.

   * To make sure that an `awk' program is portable, _every_ character
     in the REPLACEMENT string must be preceded with a backslash.(1)

   The POSIX standard is under revision.  Because of the problems just
listed, proposed text for the revised standard reverts to rules that
correspond more closely to the original existing practice. The proposed
rules have special cases that make it possible to produce a `\'
preceding the matched text:

      You type         `sub' sees         `sub' generates
      --------         ----------         ---------------
     `\\\\\\&'           `\\\&'            a literal `\&'
       `\\\\&'            `\\&'            a literal `\', followed by the matched text
         `\\&'             `\&'            a literal `&'
         `\\q'             `\q'            a literal `\q'

   In a nutshell, at the runtime level, there are now three special
sequences of characters (`\\\&', `\\&' and `\&') whereas historically
there was only one.  However, as in the historical case, any `\' that
is not part of one of these three sequences is not special and appears
in the output literally.

   `gawk' 3.0 and 3.1 follow these proposed POSIX rules for `sub' and
`gsub'.  Whether these proposed rules will actually become codified
into the standard is unknown at this point. Subsequent `gawk' releases
will track the standard and implement whatever the final version
specifies; this Info file will be updated as well.(2)

   The rules for `gensub' are considerably simpler. At the runtime
level, whenever `gawk' sees a `\', if the following character is a
digit, then the text that matched the corresponding parenthesized
subexpression is placed in the generated output.  Otherwise, no matter
what character follows the `\', it appears in the generated text and
the `\' does not:

       You type          `gensub' sees         `gensub' generates
       --------          -------------         ------------------
           `&'                    `&'            the matched text
         `\\&'                   `\&'            a literal `&'
        `\\\\'                   `\\'            a literal `\'
       `\\\\&'                  `\\&'            a literal `\', then the matched text
     `\\\\\\&'                 `\\\&'            a literal `\&'
         `\\q'                   `\q'            a literal `q'

   Because of the complexity of the lexical and runtime level processing
and the special cases for `sub' and `gsub', we recommend the use of
`gawk' and `gensub' when you have to do substitutions.

Advanced Notes: Matching the Null String
----------------------------------------

   In `awk', the `*' operator can match the null string.  This is
particularly important for the `sub', `gsub', and `gensub' functions.
For example:

     $ echo abc | awk '{ gsub(/m*/, "X"); print }'
     -| XaXbXcX

Although this makes a certain amount of sense, it can be surprising.

   ---------- Footnotes ----------

   (1) This consequence was certainly unintended.

   (2) As this Info file was being finalized, we learned that the POSIX
standard will not use these rules.  However, it was too late to change
`gawk' for the 3.1 release.  `gawk' behaves as described here.


File: gawk.info,  Node: I/O Functions,  Next: Time Functions,  Prev: String Functions,  Up: Built-in

Input/Output Functions
----------------------

   The following functions relate to input/output (I/O).  Optional
parameters are enclosed in square brackets ([ ]):

`close(FILENAME [, HOW])'
     Close the file FILENAME for input or output. Alternatively, the
     argument may be a shell command that was used for creating a
     coprocess, or for redirecting to or from a pipe; then the
     coprocess or pipe is closed.  *Note Closing Input and Output
     Redirections: Close Files And Pipes, for more information.

     When closing a coprocess, it is occasionally useful to first close
     one end of the two-way pipe and then to close the other.  This is
     done by providing a second argument to `close'.  This second
     argument should be one of the two string values `"to"' or `"from"',
     indicating which end of the pipe to close.  Case in the string does
     not matter.  *Note Two-Way Communications with Another Process:
     Two-way I/O, which discusses this feature in more detail and gives
     an example.

`fflush([FILENAME])'
     Flush any buffered output associated with FILENAME, which is
     either a file opened for writing or a shell command for
     redirecting output to a pipe or coprocess.

     Many utility programs "buffer" their output; i.e., they save
     information to write to a disk file or terminal in memory until
     there is enough for it to be worthwhile to send the data to the
     output device.  This is often more efficient than writing every
     little bit of information as soon as it is ready.  However,
     sometimes it is necessary to force a program to "flush" its
     buffers; that is, write the information to its destination, even
     if a buffer is not full.  This is the purpose of the `fflush'
     function--`gawk' also buffers its output and the `fflush' function
     forces `gawk' to flush its buffers.

     `fflush' was added to the Bell Laboratories research version of
     `awk' in 1994; it is not part of the POSIX standard and is not
     available if `--posix' has been specified on the command line
     (*note Command-Line Options: Options.).

     `gawk' extends the `fflush' function in two ways.  The first is to
     allow no argument at all. In this case, the buffer for the
     standard output is flushed.  The second is to allow the null string
     (`""') as the argument. In this case, the buffers for _all_ open
     output files and pipes are flushed.

     `fflush' returns zero if the buffer is successfully flushed;
     otherwise, it returns -1.  In the case where all buffers are
     flushed, the return value is zero only if all buffers were flushed
     successfully.  Otherwise, it is -1, and `gawk' warns about the
     problem FILENAME.

     `gawk' also issues a warning message if you attempt to flush a
     file or pipe that was opened for reading (such as with `getline'),
     or if FILENAME is not an open file, pipe, or coprocess.  In such a
     case, `fflush' returns -1, as well.

`system(COMMAND)'
     Executes operating-system commands and then returns to the `awk'
     program.  The `system' function executes the command given by the
     string COMMAND.  It returns the status returned by the command
     that was executed as its value.

     For example, if the following fragment of code is put in your `awk'
     program:

          END {
               system("date | mail -s 'awk run done' root")
          }

     the system administrator is sent mail when the `awk' program
     finishes processing input and begins its end-of-input processing.

     Note that redirecting `print' or `printf' into a pipe is often
     enough to accomplish your task.  If you need to run many commands,
     it is more efficient to simply print them down a pipeline to the
     shell:

          while (MORE STUFF TO DO)
              print COMMAND | "/bin/sh"
          close("/bin/sh")

     However, if your `awk' program is interactive, `system' is useful
     for cranking up large self-contained programs, such as a shell or
     an editor.  Some operating systems cannot implement the `system'
     function.  `system' causes a fatal error if it is not supported.

Advanced Notes: Interactive Versus Noninteractive Buffering
-----------------------------------------------------------

   As a side point, buffering issues can be even more confusing,
depending upon whether your program is "interactive", i.e.,
communicating with a user sitting at a keyboard.(1)

   Interactive programs generally "line buffer" their output; i.e., they
write out every line.  Noninteractive programs wait until they have a
full buffer, which may be many lines of output.  Here is an example of
the difference:

     $ awk '{ print $1 + $2 }'
     1 1
     -| 2
     2 3
     -| 5
     Ctrl-d

Each line of output is printed immediately. Compare that behavior with
this example:

     $ awk '{ print $1 + $2 }' | cat
     1 1
     2 3
     Ctrl-d
     -| 2
     -| 5

Here, no output is printed until after the `Ctrl-d' is typed, because
it is all buffered and sent down the pipe to `cat' in one shot.

Advanced Notes: Controlling Output Buffering with `system'
----------------------------------------------------------

   The `fflush' function provides explicit control over output
buffering for individual files and pipes.  However, its use is not
portable to many other `awk' implementations.  An alternative method to
flush output buffers is to call `system' with a null string as its
argument:

     system("")   # flush output

`gawk' treats this use of the `system' function as a special case and
is smart enough not to run a shell (or other command interpreter) with
the empty command.  Therefore, with `gawk', this idiom is not only
useful, it is also efficient.  While this method should work with other
`awk' implementations, it does not necessarily avoid starting an
unnecessary shell.  (Other implementations may only flush the buffer
associated with the standard output and not necessarily all buffered
output.)

   If you think about what a programmer expects, it makes sense that
`system' should flush any pending output.  The following program:

     BEGIN {
          print "first print"
          system("echo system echo")
          print "second print"
     }

must print:

     first print
     system echo
     second print

and not:

     system echo
     first print
     second print

   If `awk' did not flush its buffers before calling `system', you
would see the latter (undesirable) output.

   ---------- Footnotes ----------

   (1) A program is interactive if the standard output is connected to
a terminal device.


File: gawk.info,  Node: Time Functions,  Next: Bitwise Functions,  Prev: I/O Functions,  Up: Built-in

Using `gawk''s Timestamp Functions
----------------------------------

   `awk' programs are commonly used to process log files containing
timestamp information, indicating when a particular log record was
written.  Many programs log their timestamp in the form returned by the
`time' system call, which is the number of seconds since a particular
epoch.  On POSIX-compliant systems, it is the number of seconds since
1970-01-01 00:00:00 UTC, not counting leap seconds.(1) All known
POSIX-compliant systems support timestamps from 0 through 2^31 - 1,
which is sufficient to represent times through 2038-01-19 03:14:07 UTC.
Many systems support a wider range of timestamps, including negative
timestamps that represent times before the epoch.

   In order to make it easier to process such log files and to produce
useful reports, `gawk' provides the following functions for working
with timestamps.  They are `gawk' extensions; they are not specified in
the POSIX standard, nor are they in any other known version of `awk'.(2)
Optional parameters are enclosed in square brackets ([ ]):

`systime()'
     This function returns the current time as the number of seconds
     since the system epoch.  On POSIX systems, this is the number of
     seconds since 1970-01-01 00:00:00 UTC, not counting leap seconds.
     It may be a different number on other systems.

`mktime(DATESPEC)'
     This function turns DATESPEC into a timestamp in the same form as
     is returned by `systime'.  It is similar to the function of the
     same name in ISO C.  The argument, DATESPEC, is a string of the
     form `"YYYY MM DD HH MM SS [DST]"'.  The string consists of six or
     seven numbers representing, respectively, the full year including
     century, the month from 1 to 12, the day of the month from 1 to
     31, the hour of the day from 0 to 23, the minute from 0 to 59, the
     second from 0 to 60,(3) and an optional daylight-savings flag.

     The values of these numbers need not be within the ranges
     specified; for example, an hour of -1 means 1 hour before midnight.
     The origin-zero Gregorian calendar is assumed, with year 0
     preceding year 1 and year -1 preceding year 0.  The time is
     assumed to be in the local timezone.  If the daylight-savings flag
     is positive, the time is assumed to be daylight savings time; if
     zero, the time is assumed to be standard time; and if negative
     (the default), `mktime' attempts to determine whether daylight
     savings time is in effect for the specified time.

     If DATESPEC does not contain enough elements or if the resulting
     time is out of range, `mktime' returns -1.

`strftime([FORMAT [, TIMESTAMP]])'
     This function returns a string.  It is similar to the function of
     the same name in ISO C.  The time specified by TIMESTAMP is used to
     produce a string, based on the contents of the FORMAT string.  The
     TIMESTAMP is in the same format as the value returned by the
     `systime' function.  If no TIMESTAMP argument is supplied, `gawk'
     uses the current time of day as the timestamp.  If no FORMAT
     argument is supplied, `strftime' uses `"%a %b %d %H:%M:%S %Z %Y"'.
     This format string produces output that is (almost) equivalent to
     that of the `date' utility.  (Versions of `gawk' prior to 3.0
     require the FORMAT argument.)

   The `systime' function allows you to compare a timestamp from a log
file with the current time of day.  In particular, it is easy to
determine how long ago a particular record was logged.  It also allows
you to produce log records using the "seconds since the epoch" format.

   The `mktime' function allows you to convert a textual representation
of a date and time into a timestamp.   This makes it easy to do
before/after comparisons of dates and times, particularly when dealing
with date and time data coming from an external source, such as a log
file.

   The `strftime' function allows you to easily turn a timestamp into
human-readable information.  It is similar in nature to the `sprintf'
function (*note String Manipulation Functions: String Functions.), in
that it copies nonformat specification characters verbatim to the
returned string, while substituting date and time values for format
specifications in the FORMAT string.

   `strftime' is guaranteed by the 1999 ISO C standard(4) to support
the following date format specifications:

`%a'
     The locale's abbreviated weekday name.

`%A'
     The locale's full weekday name.

`%b'
     The locale's abbreviated month name.

`%B'
     The locale's full month name.

`%c'
     The locale's "appropriate" date and time representation.  (This is
     `%A %B %d %T %Y' in the `"C"' locale.)

`%C'
     The century.  This is the year divided by 100 and truncated to the
     next lower integer.

`%d'
     The day of the month as a decimal number (01-31).

`%D'
     Equivalent to specifying `%m/%d/%y'.

`%e'
     The day of the month, padded with a space if it is only one digit.

`%F'
     Equivalent to specifying `%Y-%m-%d'.  This is the ISO 8601 date
     format.

`%g'
     The year modulo 100 of the ISO week number, as a decimal number
     (00-99).  For example, January 1, 1993 is in week 53 of 1992.
     Thus, the year of its ISO week number is 1992, even though its
     year is 1993.  Similarly, December 31, 1973 is in week 1 of 1974.
     Thus, the year of its ISO week number is 1974, even though its
     year is 1973.

`%G'
     The full year of the ISO week number, as a decimal number.

`%h'
     Equivalent to `%b'.

`%H'
     The hour (24-hour clock) as a decimal number (00-23).

`%I'
     The hour (12-hour clock) as a decimal number (01-12).

`%j'
     The day of the year as a decimal number (001-366).

`%m'
     The month as a decimal number (01-12).

`%M'
     The minute as a decimal number (00-59).

`%n'
     A newline character (ASCII LF).

`%p'
     The locale's equivalent of the AM/PM designations associated with
     a 12-hour clock.

`%r'
     The locale's 12-hour clock time.  (This is `%I:%M:%S %p' in the
     `"C"' locale.)

`%R'
     Equivalent to specifying `%H:%M'.

`%S'
     The second as a decimal number (00-60).

`%t'
     A TAB character.

`%T'
     Equivalent to specifying `%H:%M:%S'.

`%u'
     The weekday as a decimal number (1-7).  Monday is day one.

`%U'
     The week number of the year (the first Sunday as the first day of
     week one) as a decimal number (00-53).

`%V'
     The week number of the year (the first Monday as the first day of
     week one) as a decimal number (01-53).  The method for determining
     the week number is as specified by ISO 8601.  (To wit: if the week
     containing January 1 has four or more days in the new year, then
     it is week one; otherwise it is week 53 of the previous year and
     the next week is week one.)

`%w'
     The weekday as a decimal number (0-6).  Sunday is day zero.

`%W'
     The week number of the year (the first Monday as the first day of
     week one) as a decimal number (00-53).

`%x'
     The locale's "appropriate" date representation.  (This is `%A %B
     %d %Y' in the `"C"' locale.)

`%X'
     The locale's "appropriate" time representation.  (This is `%T' in
     the `"C"' locale.)

`%y'
     The year modulo 100 as a decimal number (00-99).

`%Y'
     The full year as a decimal number (e.g., 1995).

`%z'
     The timezone offset in a +HHMM format (e.g., the format necessary
     to produce RFC 822/RFC 1036 date headers).

`%Z'
     The time zone name or abbreviation; no characters if no time zone
     is determinable.

`%Ec %EC %Ex %EX %Ey %EY %Od %Oe %OH'
`%OI %Om %OM %OS %Ou %OU %OV %Ow %OW %Oy'
     "Alternate representations" for the specifications that use only
     the second letter (`%c', `%C', and so on).(5) (These facilitate
     compliance with the POSIX `date' utility.)

`%%'
     A literal `%'.

   If a conversion specifier is not one of the above, the behavior is
undefined.(6)

   Informally, a "locale" is the geographic place in which a program is
meant to run.  For example, a common way to abbreviate the date
September 4, 1991 in the United States is "9/4/91."  In many countries
in Europe, however, it is abbreviated "4.9.91."  Thus, the `%x'
specification in a `"US"' locale might produce `9/4/91', while in a
`"EUROPE"' locale, it might produce `4.9.91'.  The ISO C standard
defines a default `"C"' locale, which is an environment that is typical
of what most C programmers are used to.

   A public-domain C version of `strftime' is supplied with `gawk' for
systems that are not yet fully standards-compliant.  It supports all of
the just listed format specifications.  If that version is used to
compile `gawk' (*note Installing `gawk': Installation.), then the
following additional format specifications are available:

`%k'
     The hour (24-hour clock) as a decimal number (0-23).  Single-digit
     numbers are padded with a space.

`%l'
     The hour (12-hour clock) as a decimal number (1-12).  Single-digit
     numbers are padded with a space.

`%N'
     The "Emperor/Era" name.  Equivalent to `%C'.

`%o'
     The "Emperor/Era" year.  Equivalent to `%y'.

`%s'
     The time as a decimal timestamp in seconds since the epoch.

`%v'
     The date in VMS format (e.g., `20-JUN-1991').

   Additionally, the alternate representations are recognized but their
normal representations are used.

   This example is an `awk' implementation of the POSIX `date' utility.
Normally, the `date' utility prints the current date and time of day
in a well-known format.  However, if you provide an argument to it that
begins with a `+', `date' copies nonformat specifier characters to the
standard output and interprets the current time according to the format
specifiers in the string.  For example:

     $ date '+Today is %A, %B %d, %Y.'
     -| Today is Thursday, September 14, 2000.

   Here is the `gawk' version of the `date' utility.  It has a shell
"wrapper" to handle the `-u' option, which requires that `date' run as
if the time zone is set to UTC:

     #! /bin/sh
     #
     # date --- approximate the P1003.2 'date' command
     
     case $1 in
     -u)  TZ=UTC0     # use UTC
          export TZ
          shift ;;
     esac
     
     gawk 'BEGIN  {
         format = "%a %b %d %H:%M:%S %Z %Y"
         exitval = 0
     
         if (ARGC > 2)
             exitval = 1
         else if (ARGC == 2) {
             format = ARGV[1]
             if (format ~ /^\+/)
                 format = substr(format, 2)   # remove leading +
         }
         print strftime(format)
         exit exitval
     }' "$@"

   ---------- Footnotes ----------

   (1) *Note Glossary::, especially the entries "Epoch" and "UTC."

   (2) The GNU `date' utility can also do many of the things described
here.  Its use may be preferable for simple time-related operations in
shell scripts.

   (3) Occasionally there are minutes in a year with a leap second,
which is why the seconds can go up to 60.

   (4) As this is a recent standard, not every system's `strftime'
necessarily supports all of the conversions listed here.

   (5) If you don't understand any of this, don't worry about it; these
facilities are meant to make it easier to "internationalize" programs.
Other internationalization features are described in *Note
Internationalization with `gawk': Internationalization.

   (6) This is because ISO C leaves the behavior of the C version of
`strftime' undefined and `gawk' uses the system's version of `strftime'
if it's there.  Typically, the conversion specifier either does not
appear in the returned string or appears literally.


File: gawk.info,  Node: Bitwise Functions,  Next: I18N Functions,  Prev: Time Functions,  Up: Built-in

Bit-Manipulation Functions of `gawk'
------------------------------------

     I can explain it for you, but I can't understand it for you.
     Anonymous

   Many languages provide the ability to perform "bitwise" operations
on two integer numbers.  In other words, the operation is performed on
each successive pair of bits in the operands.  Three common operations
are bitwise AND, OR, and XOR.  The operations are described by the
following table:

                     Bit Operator
               |  AND  |   OR  |  XOR
               |---+---+---+---+---+---
     Operands  | 0 | 1 | 0 | 1 | 0 | 1
     ----------+---+---+---+---+---+---
         0     | 0   0 | 0   1 | 0   1
         1     | 0   1 | 1   1 | 1   0

   As you can see, the result of an AND operation is 1 only when _both_
bits are 1.  The result of an OR operation is 1 if _either_ bit is 1.
The result of an XOR operation is 1 if either bit is 1, but not both.
The next operation is the "complement"; the complement of 1 is 0 and
the complement of 0 is 1. Thus, this operation "flips" all the bits of
a given value.

   Finally, two other common operations are to shift the bits left or
right.  For example, if you have a bit string `10111001' and you shift
it right by three bits, you end up with `00010111'.(1) If you start over
again with `10111001' and shift it left by three bits, you end up with
`11001000'.  `gawk' provides built-in functions that implement the
bitwise operations just described. They are:

`and(V1, V2)'          Returns the bitwise AND of the values provided by V1
                       and V2.
`or(V1, V2)'           Returns the bitwise OR of the values provided by V1
                       and V2.
`xor(V1, V2)'          Returns the bitwise XOR of the values provided by V1
                       and V2.
`compl(VAL)'           Returns the bitwise complement of VAL.
`lshift(VAL, COUNT)'   Returns the value of VAL, shifted left by COUNT bits.
`rshift(VAL, COUNT)'   Returns the value of VAL, shifted right by COUNT bits.

   For all of these functions, first the double-precision
floating-point value is converted to a C `unsigned long', then the
bitwise operation is performed and then the result is converted back
into a C `double'. (If you don't understand this paragraph, don't worry
about it.)

   Here is a user-defined function (*note User-Defined Functions:
User-defined.)  that illustrates the use of these functions:

     # bits2str --- turn a byte into readable 1's and 0's
     
     function bits2str(bits,        data, mask)
     {
         if (bits == 0)
             return "0"
     
         mask = 1
         for (; bits != 0; bits = rshift(bits, 1))
             data = (and(bits, mask) ? "1" : "0") data
     
         while ((length(data) % 8) != 0)
             data = "0" data
     
         return data
     }
     
     BEGIN {
         printf "123 = %s\n", bits2str(123)
         printf "0123 = %s\n", bits2str(0123)
         printf "0x99 = %s\n", bits2str(0x99)
         comp = compl(0x99)
         printf "compl(0x99) = %#x = %s\n", comp, bits2str(comp)
         shift = lshift(0x99, 2)
         printf "lshift(0x99, 2) = %#x = %s\n", shift, bits2str(shift)
         shift = rshift(0x99, 2)
         printf "rshift(0x99, 2) = %#x = %s\n", shift, bits2str(shift)
     }

This program produces the following output when run:

     $ gawk -f testbits.awk
     -| 123 = 01111011
     -| 0123 = 01010011
     -| 0x99 = 10011001
     -| compl(0x99) = 0xffffff66 = 11111111111111111111111101100110
     -| lshift(0x99, 2) = 0x264 = 0000001001100100
     -| rshift(0x99, 2) = 0x26 = 00100110

   The `bits2str' function turns a binary number into a string.  The
number `1' represents a binary value where the rightmost bit is set to
1.  Using this mask, the function repeatedly checks the rightmost bit.
ANDing the mask with the value indicates whether the rightmost bit is 1
or not. If so, a `"1"' is concatenated onto the front of the string.
Otherwise, a `"0"' is added.  The value is then shifted right by one
bit and the loop continues until there are no more 1 bits.

   If the initial value is zero it returns a simple `"0"'.  Otherwise,
at the end, it pads the value with zeros to represent multiples of
8-bit quantities. This is typical in modern computers.

   The main code in the `BEGIN' rule shows the difference between the
decimal and octal values for the same numbers (*note Octal and
Hexadecimal Numbers: Nondecimal-numbers.), and then demonstrates the
results of the `compl', `lshift', and `rshift' functions.

   ---------- Footnotes ----------

   (1) This example shows that 0's come in on the left side. For
`gawk', this is always true, but in some languages, it's possible to
have the left side fill with 1's. Caveat emptor.


File: gawk.info,  Node: I18N Functions,  Prev: Bitwise Functions,  Up: Built-in

Using `gawk''s String-Translation Functions
-------------------------------------------

   `gawk' provides facilities for internationalizing `awk' programs.
These include the functions described in the following list.  The
descriptions here are purposely brief.  *Note Internationalization with
`gawk': Internationalization, for the full story.  Optional parameters
are enclosed in square brackets ([ ]):

`dcgettext(STRING [, DOMAIN [, CATEGORY]])'
     This function returns the translation of STRING in text domain
     DOMAIN for locale category CATEGORY.  The default value for DOMAIN
     is the current value of `TEXTDOMAIN'.  The default value for
     CATEGORY is `"LC_MESSAGES"'.

`dcngettext(STRING1, STRING2, NUMBER [, DOMAIN [, CATEGORY]])'
     This function returns the plural form used for NUMBER of the
     translation of STRING1 and STRING2 in text domain DOMAIN for
     locale category CATEGORY. STRING1 is the English singular variant
     of a message, and STRING2 the English plural variant of the same
     message.  The default value for DOMAIN is the current value of
     `TEXTDOMAIN'.  The default value for CATEGORY is `"LC_MESSAGES"'.

`bindtextdomain(DIRECTORY [, DOMAIN])'
     This function allows you to specify the directory in which `gawk'
     will look for message translation files, in case they will not or
     cannot be placed in the "standard" locations (e.g., during
     testing).  It returns the directory in which DOMAIN is "bound."

     The default DOMAIN is the value of `TEXTDOMAIN'.  If DIRECTORY is
     the null string (`""'), then `bindtextdomain' returns the current
     binding for the given DOMAIN.


File: gawk.info,  Node: User-defined,  Prev: Built-in,  Up: Functions

User-Defined Functions
======================

   Complicated `awk' programs can often be simplified by defining your
own functions.  User-defined functions can be called just like built-in
ones (*note Function Calls::), but it is up to you to define them,
i.e., to tell `awk' what they should do.

* Menu:

* Definition Syntax::           How to write definitions and what they mean.
* Function Example::            An example function definition and what it
                                does.
* Function Caveats::            Things to watch out for.
* Return Statement::            Specifying the value a function returns.
* Dynamic Typing::              How variable types can change at runtime.


File: gawk.info,  Node: Definition Syntax,  Next: Function Example,  Prev: User-defined,  Up: User-defined

Function Definition Syntax
--------------------------

   Definitions of functions can appear anywhere between the rules of an
`awk' program.  Thus, the general form of an `awk' program is extended
to include sequences of rules _and_ user-defined function definitions.
There is no need to put the definition of a function before all uses of
the function.  This is because `awk' reads the entire program before
starting to execute any of it.

   The definition of a function named NAME looks like this:

     function NAME(PARAMETER-LIST)
     {
          BODY-OF-FUNCTION
     }

NAME is the name of the function to define.  A valid function name is
like a valid variable name: a sequence of letters, digits, and
underscores that doesn't start with a digit.  Within a single `awk'
program, any particular name can only be used as a variable, array, or
function.

   PARAMETER-LIST is a list of the function's arguments and local
variable names, separated by commas.  When the function is called, the
argument names are used to hold the argument values given in the call.
The local variables are initialized to the empty string.  A function
cannot have two parameters with the same name, nor may it have a
parameter with the same name as the function itself.

   The BODY-OF-FUNCTION consists of `awk' statements.  It is the most
important part of the definition, because it says what the function
should actually _do_.  The argument names exist to give the body a way
to talk about the arguments; local variables exist to give the body
places to keep temporary values.

   Argument names are not distinguished syntactically from local
variable names. Instead, the number of arguments supplied when the
function is called determines how many argument variables there are.
Thus, if three argument values are given, the first three names in
PARAMETER-LIST are arguments and the rest are local variables.

   It follows that if the number of arguments is not the same in all
calls to the function, some of the names in PARAMETER-LIST may be
arguments on some occasions and local variables on others.  Another way
to think of this is that omitted arguments default to the null string.

   Usually when you write a function, you know how many names you
intend to use for arguments and how many you intend to use as local
variables.  It is conventional to place some extra space between the
arguments and the local variables, in order to document how your
function is supposed to be used.

   During execution of the function body, the arguments and local
variable values hide, or "shadow", any variables of the same names used
in the rest of the program.  The shadowed variables are not accessible
in the function definition, because there is no way to name them while
their names have been taken away for the local variables.  All other
variables used in the `awk' program can be referenced or set normally
in the function's body.

   The arguments and local variables last only as long as the function
body is executing.  Once the body finishes, you can once again access
the variables that were shadowed while the function was running.

   The function body can contain expressions that call functions.  They
can even call this function, either directly or by way of another
function.  When this happens, we say the function is "recursive".  The
act of a function calling itself is called "recursion".

   In many `awk' implementations, including `gawk', the keyword
`function' may be abbreviated `func'.  However, POSIX only specifies
the use of the keyword `function'.  This actually has some practical
implications.  If `gawk' is in POSIX-compatibility mode (*note
Command-Line Options: Options.), then the following statement does
_not_ define a function:

     func foo() { a = sqrt($1) ; print a }

Instead it defines a rule that, for each record, concatenates the value
of the variable `func' with the return value of the function `foo'.  If
the resulting string is non-null, the action is executed.  This is
probably not what is desired.  (`awk' accepts this input as
syntactically valid, because functions may be used before they are
defined in `awk' programs.)

   To ensure that your `awk' programs are portable, always use the
keyword `function' when defining a function.


File: gawk.info,  Node: Function Example,  Next: Function Caveats,  Prev: Definition Syntax,  Up: User-defined

Function Definition Examples
----------------------------

   Here is an example of a user-defined function, called `myprint', that
takes a number and prints it in a specific format:

     function myprint(num)
     {
          printf "%6.3g\n", num
     }

To illustrate, here is an `awk' rule that uses our `myprint' function:

     $3 > 0     { myprint($3) }

This program prints, in our special format, all the third fields that
contain a positive number in our input.  Therefore, when given the
following:

      1.2   3.4    5.6   7.8
      9.10 11.12 -13.14 15.16
     17.18 19.20  21.22 23.24

this program, using our function to format the results, prints:

        5.6
       21.2

   This function deletes all the elements in an array:

     function delarray(a,    i)
     {
         for (i in a)
            delete a[i]
     }

   When working with arrays, it is often necessary to delete all the
elements in an array and start over with a new list of elements (*note
The `delete' Statement: Delete.).  Instead of having to repeat this
loop everywhere that you need to clear out an array, your program can
just call `delarray'.  (This guarantees portability.  The use of
`delete ARRAY' to delete the contents of an entire array is a
nonstandard extension.)

   The following is an example of a recursive function.  It takes a
string as an input parameter and returns the string in backwards order.
Recursive functions must always have a test that stops the recursion.
In this case, the recursion terminates when the starting position is
zero, i.e., when there are no more characters left in the string.

     function rev(str, start)
     {
         if (start == 0)
             return ""
     
         return (substr(str, start, 1) rev(str, start - 1))
     }

   If this function is in a file named `rev.awk', it can be tested this
way:

     $ echo "Don't Panic!" |
     > gawk --source '{ print rev($0, length($0)) }' -f rev.awk
     -| !cinaP t'noD

   The C `ctime' function takes a timestamp and returns it in a string,
formatted in a well-known fashion.  The following example uses the
built-in `strftime' function (*note Using `gawk''s Timestamp Functions:
Time Functions.)  to create an `awk' version of `ctime':

     # ctime.awk
     #
     # awk version of C ctime(3) function
     
     function ctime(ts,    format)
     {
         format = "%a %b %d %H:%M:%S %Z %Y"
         if (ts == 0)
             ts = systime()       # use current time as default
         return strftime(format, ts)
     }


File: gawk.info,  Node: Function Caveats,  Next: Return Statement,  Prev: Function Example,  Up: User-defined

Calling User-Defined Functions
------------------------------

   "Calling a function" means causing the function to run and do its
job.  A function call is an expression and its value is the value
returned by the function.

   A function call consists of the function name followed by the
arguments in parentheses.  `awk' expressions are what you write in the
call for the arguments.  Each time the call is executed, these
expressions are evaluated, and the values are the actual arguments.  For
example, here is a call to `foo' with three arguments (the first being
a string concatenation):

     foo(x y, "lose", 4 * z)

   *Caution:* Whitespace characters (spaces and tabs) are not allowed
between the function name and the open-parenthesis of the argument list.
If you write whitespace by mistake, `awk' might think that you mean to
concatenate a variable with an expression in parentheses.  However, it
notices that you used a function name and not a variable name, and
reports an error.

   When a function is called, it is given a _copy_ of the values of its
arguments.  This is known as "call by value".  The caller may use a
variable as the expression for the argument, but the called function
does not know this--it only knows what value the argument had.  For
example, if you write the following code:

     foo = "bar"
     z = myfunc(foo)

then you should not think of the argument to `myfunc' as being "the
variable `foo'."  Instead, think of the argument as the string value
`"bar"'.  If the function `myfunc' alters the values of its local
variables, this has no effect on any other variables.  Thus, if `myfunc'
does this:

     function myfunc(str)
     {
       print str
       str = "zzz"
       print str
     }

to change its first argument variable `str', it does _not_ change the
value of `foo' in the caller.  The role of `foo' in calling `myfunc'
ended when its value (`"bar"') was computed.  If `str' also exists
outside of `myfunc', the function body cannot alter this outer value,
because it is shadowed during the execution of `myfunc' and cannot be
seen or changed from there.

   However, when arrays are the parameters to functions, they are _not_
copied.  Instead, the array itself is made available for direct
manipulation by the function.  This is usually called "call by
reference".  Changes made to an array parameter inside the body of a
function _are_ visible outside that function.

   *Note:* Changing an array parameter inside a function can be very
dangerous if you do not watch what you are doing.  For example:

     function changeit(array, ind, nvalue)
     {
          array[ind] = nvalue
     }
     
     BEGIN {
         a[1] = 1; a[2] = 2; a[3] = 3
         changeit(a, 2, "two")
         printf "a[1] = %s, a[2] = %s, a[3] = %s\n",
                 a[1], a[2], a[3]
     }

prints `a[1] = 1, a[2] = two, a[3] = 3', because `changeit' stores
`"two"' in the second element of `a'.

   Some `awk' implementations allow you to call a function that has not
been defined. They only report a problem at runtime when the program
actually tries to call the function. For example:

     BEGIN {
         if (0)
             foo()
         else
             bar()
     }
     function bar() { ... }
     # note that `foo' is not defined

Because the `if' statement will never be true, it is not really a
problem that `foo' has not been defined.  Usually, though, it is a
problem if a program calls an undefined function.

   If `--lint' is specified (*note Command-Line Options: Options.),
`gawk' reports calls to undefined functions.

   Some `awk' implementations generate a runtime error if you use the
`next' statement (*note The `next' Statement: Next Statement.)  inside
a user-defined function.  `gawk' does not have this limitation.


File: gawk.info,  Node: Return Statement,  Next: Dynamic Typing,  Prev: Function Caveats,  Up: User-defined

The `return' Statement
----------------------

   The body of a user-defined function can contain a `return' statement.
This statement returns control to the calling part of the `awk'
program.  It can also be used to return a value for use in the rest of
the `awk' program.  It looks like this:

     return [EXPRESSION]

   The EXPRESSION part is optional.  If it is omitted, then the returned
value is undefined, and therefore, unpredictable.

   A `return' statement with no value expression is assumed at the end
of every function definition.  So if control reaches the end of the
function body, then the function returns an unpredictable value.  `awk'
does _not_ warn you if you use the return value of such a function.

   Sometimes, you want to write a function for what it does, not for
what it returns.  Such a function corresponds to a `void' function in C
or to a `procedure' in Pascal.  Thus, it may be appropriate to not
return any value; simply bear in mind that if you use the return value
of such a function, you do so at your own risk.

   The following is an example of a user-defined function that returns
a value for the largest number among the elements of an array:

     function maxelt(vec,   i, ret)
     {
          for (i in vec) {
               if (ret == "" || vec[i] > ret)
                    ret = vec[i]
          }
          return ret
     }

You call `maxelt' with one argument, which is an array name.  The local
variables `i' and `ret' are not intended to be arguments; while there
is nothing to stop you from passing more than one argument to `maxelt',
the results would be strange.  The extra space before `i' in the
function parameter list indicates that `i' and `ret' are not supposed
to be arguments.  You should follow this convention when defining
functions.

   The following program uses the `maxelt' function.  It loads an
array, calls `maxelt', and then reports the maximum number in that
array:

     function maxelt(vec,   i, ret)
     {
          for (i in vec) {
               if (ret == "" || vec[i] > ret)
                    ret = vec[i]
          }
          return ret
     }
     
     # Load all fields of each record into nums.
     {
          for(i = 1; i <= NF; i++)
               nums[NR, i] = $i
     }
     
     END {
          print maxelt(nums)
     }

   Given the following input:

      1 5 23 8 16
     44 3 5 2 8 26
     256 291 1396 2962 100
     -6 467 998 1101
     99385 11 0 225

the program reports (predictably) that `99385' is the largest number in
the array.


File: gawk.info,  Node: Dynamic Typing,  Prev: Return Statement,  Up: User-defined

Functions and Their Effects on Variable Typing
----------------------------------------------

   `awk' is a very fluid language.  It is possible that `awk' can't
tell if an identifier represents a regular variable or an array until
runtime.  Here is an annotated sample program:

     function foo(a)
     {
         a[1] = 1   # parameter is an array
     }
     
     BEGIN {
         b = 1
         foo(b)  # invalid: fatal type mismatch
     
         foo(x)  # x uninitialized, becomes an array dynamically
         x = 1   # now not allowed, runtime error
     }

   Usually, such things aren't a big issue, but it's worth being aware
of them.


File: gawk.info,  Node: Internationalization,  Next: Advanced Features,  Prev: Functions,  Up: Top

Internationalization with `gawk'
********************************

   Once upon a time, computer makers wrote software that worked only in
English.  Eventually, hardware and software vendors noticed that if
their systems worked in the native languages of non-English-speaking
countries, they were able to sell more systems.  As a result,
internationalization and localization of programs and software systems
became a common practice.

   Until recently, the ability to provide internationalization was
largely restricted to programs written in C and C++.  This major node
describes the underlying library `gawk' uses for internationalization,
as well as how `gawk' makes internationalization features available at
the `awk' program level.  Having internationalization available at the
`awk' level gives software developers additional flexibility--they are
no longer required to write in C when internationalization is a
requirement.

* Menu:

* I18N and L10N::               Internationalization and Localization.
* Explaining gettext::          How GNU `gettext' works.
* Programmer i18n::             Features for the programmer.
* Translator i18n::             Features for the translator.
* I18N Example::                A simple i18n example.
* Gawk I18N::                   `gawk' is also internationalized.


File: gawk.info,  Node: I18N and L10N,  Next: Explaining gettext,  Prev: Internationalization,  Up: Internationalization

Internationalization and Localization
=====================================

   "Internationalization" means writing (or modifying) a program once,
in such a way that it can use multiple languages without requiring
further source-code changes.  "Localization" means providing the data
necessary for an internationalized program to work in a particular
language.  Most typically, these terms refer to features such as the
language used for printing error messages, the language used to read
responses, and information related to how numerical and monetary values
are printed and read.


File: gawk.info,  Node: Explaining gettext,  Next: Programmer i18n,  Prev: I18N and L10N,  Up: Internationalization

GNU `gettext'
=============

   The facilities in GNU `gettext' focus on messages; strings printed
by a program, either directly or via formatting with `printf' or
`sprintf'.(1)

   When using GNU `gettext', each application has its own "text
domain".  This is a unique name, such as `kpilot' or `gawk', that
identifies the application.  A complete application may have multiple
components--programs written in C or C++, as well as scripts written in
`sh' or `awk'.  All of the components use the same text domain.

   To make the discussion concrete, assume we're writing an application
named `guide'.  Internationalization consists of the following steps,
in this order:

  1. The programmer goes through the source for all of `guide''s
     components and marks each string that is a candidate for
     translation.  For example, `"`-F': option required"' is a good
     candidate for translation.  A table with strings of option names
     is not (e.g., `gawk''s `--profile' option should remain the same,
     no matter what the local language).

  2. The programmer indicates the application's text domain (`"guide"')
     to the `gettext' library, by calling the `textdomain' function.

  3. Messages from the application are extracted from the source code
     and collected into a portable object file (`guide.po'), which
     lists the strings and their translations.  The translations are
     initially empty.  The original (usually English) messages serve as
     the key for lookup of the translations.

  4. For each language with a translator, `guide.po' is copied and
     translations are created and shipped with the application.

  5. Each language's `.po' file is converted into a binary message
     object (`.mo') file.  A message object file contains the original
     messages and their translations in a binary format that allows
     fast lookup of translations at runtime.

  6. When `guide' is built and installed, the binary translation files
     are installed in a standard place.

  7. For testing and development, it is possible to tell `gettext' to
     use `.mo' files in a different directory than the standard one by
     using the `bindtextdomain' function.

  8. At runtime, `guide' looks up each string via a call to `gettext'.
     The returned string is the translated string if available, or the
     original string if not.

  9. If necessary, it is possible to access messages from a different
     text domain than the one belonging to the application, without
     having to switch the application's default text domain back and
     forth.

   In C (or C++), the string marking and dynamic translation lookup are
accomplished by wrapping each string in a call to `gettext':

     printf(gettext("Don't Panic!\n"));

   The tools that extract messages from source code pull out all
strings enclosed in calls to `gettext'.

   The GNU `gettext' developers, recognizing that typing `gettext' over
and over again is both painful and ugly to look at, use the macro `_'
(an underscore) to make things easier:

     /* In the standard header file: */
     #define _(str) gettext(str)
     
     /* In the program text: */
     printf(_("Don't Panic!\n"));

This reduces the typing overhead to just three extra characters per
string and is considerably easier to read as well.  There are locale
"categories" for different types of locale-related information.  The
defined locale categories that `gettext' knows about are:

`LC_MESSAGES'
     Text messages.  This is the default category for `gettext'
     operations, but it is possible to supply a different one
     explicitly, if necessary.  (It is almost never necessary to supply
     a different category.)

`LC_COLLATE'
     Text-collation information; i.e., how different characters and/or
     groups of characters sort in a given language.

`LC_CTYPE'
     Character-type information (alphabetic, digit, upper- or
     lowercase, and so on).  This information is accessed via the POSIX
     character classes in regular expressions, such as `/[[:alnum:]]/'
     (*note Regular Expression Operators: Regexp Operators.).

`LC_MONETARY'
     Monetary information, such as the currency symbol, and whether the
     symbol goes before or after a number.

`LC_NUMERIC'
     Numeric information, such as which characters to use for the
     decimal point and the thousands separator.(2)

`LC_RESPONSE'
     Response information, such as how "yes" and "no" appear in the
     local language, and possibly other information as well.

`LC_TIME'
     Time- and date-related information, such as 12- or 24-hour clock,
     month printed before or after day in a date, local month
     abbreviations, and so on.

`LC_ALL'
     All of the above.  (Not too useful in the context of `gettext'.)

   ---------- Footnotes ----------

   (1) For some operating systems, the `gawk' port doesn't support GNU
`gettext'.  This applies most notably to the PC operating systems.  As
such, these features are not available if you are using one of those
operating systems.  Sorry.

   (2) Americans use a comma every three decimal places and a period
for the decimal point, while many Europeans do exactly the opposite:
`1,234.56' versus `1.234,56'.


File: gawk.info,  Node: Programmer i18n,  Next: Translator i18n,  Prev: Explaining gettext,  Up: Internationalization

Internationalizing `awk' Programs
=================================

   `gawk' provides the following variables and functions for
internationalization:

`TEXTDOMAIN'
     This variable indicates the application's text domain.  For
     compatibility with GNU `gettext', the default value is
     `"messages"'.

`_"your message here"'
     String constants marked with a leading underscore are candidates
     for translation at runtime.  String constants without a leading
     underscore are not translated.

`dcgettext(STRING [, DOMAIN [, CATEGORY]])'
     This built-in function returns the translation of STRING in text
     domain DOMAIN for locale category CATEGORY.  The default value for
     DOMAIN is the current value of `TEXTDOMAIN'.  The default value
     for CATEGORY is `"LC_MESSAGES"'.

     If you supply a value for CATEGORY, it must be a string equal to
     one of the known locale categories described in *Note GNU
     `gettext': Explaining gettext.  You must also supply a text
     domain.  Use `TEXTDOMAIN' if you want to use the current domain.

     *Caution:* The order of arguments to the `awk' version of the
     `dcgettext' function is purposely different from the order for the
     C version.  The `awk' version's order was chosen to be simple and
     to allow for reasonable `awk'-style default arguments.

`dcngettext(STRING1, STRING2, NUMBER [, DOMAIN [, CATEGORY]])'
     This built-in function returns the plural form used for NUMBER of
     the translation of STRING1 and STRING2 in text domain DOMAIN for
     locale category CATEGORY. STRING1 is the English singular variant
     of a message, and STRING2 the English plural variant of the same
     message.  The default value for DOMAIN is the current value of
     `TEXTDOMAIN'.  The default value for CATEGORY is `"LC_MESSAGES"'.

     The same remarks as for the `dcgettext' function apply.

`bindtextdomain(DIRECTORY [, DOMAIN])'
     This built-in function allows you to specify the directory in which
     `gettext' looks for `.mo' files, in case they will not or cannot
     be placed in the standard locations (e.g., during testing).  It
     returns the directory in which DOMAIN is "bound."

     The default DOMAIN is the value of `TEXTDOMAIN'.  If DIRECTORY is
     the null string (`""'), then `bindtextdomain' returns the current
     binding for the given DOMAIN.

   To use these facilities in your `awk' program, follow the steps
outlined in *Note GNU `gettext': Explaining gettext, like so:

  1. Set the variable `TEXTDOMAIN' to the text domain of your program.
     This is best done in a `BEGIN' rule (*note The `BEGIN' and `END'
     Special Patterns: BEGIN/END.), or it can also be done via the `-v'
     command-line option (*note Command-Line Options: Options.):

          BEGIN {
              TEXTDOMAIN = "guide"
              ...
          }

  2. Mark all translatable strings with a leading underscore (`_')
     character.  It _must_ be adjacent to the opening quote of the
     string.  For example:

          print _"hello, world"
          x = _"you goofed"
          printf(_"Number of users is %d\n", nusers)

  3. If you are creating strings dynamically, you can still translate
     them, using the `dcgettext' built-in function:

          message = nusers " users logged in"
          message = dcgettext(message, "adminprog")
          print message

     Here, the call to `dcgettext' supplies a different text domain
     (`"adminprog"') in which to find the message, but it uses the
     default `"LC_MESSAGES"' category.

  4. During development, you might want to put the `.mo' file in a
     private directory for testing.  This is done with the
     `bindtextdomain' built-in function:

          BEGIN {
             TEXTDOMAIN = "guide"   # our text domain
             if (Testing) {
                 # where to find our files
                 bindtextdomain("testdir")
                 # joe is in charge of adminprog
                 bindtextdomain("../joe/testdir", "adminprog")
             }
             ...
          }


   *Note A Simple Internationalization Example: I18N Example, for an
example program showing the steps to create and use translations from
`awk'.


File: gawk.info,  Node: Translator i18n,  Next: I18N Example,  Prev: Programmer i18n,  Up: Internationalization

Translating `awk' Programs
==========================

   Once a program's translatable strings have been marked, they must be
extracted to create the initial `.po' file.  As part of translation, it
is often helpful to rearrange the order in which arguments to `printf'
are output.

   `gawk''s `--gen-po' command-line option extracts the messages and is
discussed next.  After that, `printf''s ability to rearrange the order
for `printf' arguments at runtime is covered.

* Menu:

* String Extraction::           Extracting marked strings.
* Printf Ordering::             Rearranging `printf' arguments.
* I18N Portability::            `awk'-level portability issues.


File: gawk.info,  Node: String Extraction,  Next: Printf Ordering,  Prev: Translator i18n,  Up: Translator i18n

Extracting Marked Strings
-------------------------

   Once your `awk' program is working, and all the strings have been
marked and you've set (and perhaps bound) the text domain, it is time
to produce translations.  First, use the `--gen-po' command-line option
to create the initial `.po' file:

     $ gawk --gen-po -f guide.awk > guide.po

   When run with `--gen-po', `gawk' does not execute your program.
Instead, it parses it as usual and prints all marked strings to
standard output in the format of a GNU `gettext' Portable Object file.
Also included in the output are any constant strings that appear as the
first argument to `dcgettext' or as the first and second argument to
`dcngettext'.(1) *Note A Simple Internationalization Example: I18N
Example, for the full list of steps to go through to create and test
translations for `guide'.

   ---------- Footnotes ----------

   (1) Starting with `gettext' version 0.11.1, the `xgettext' utility
that comes with GNU `gettext' can handle `.awk' files.


File: gawk.info,  Node: Printf Ordering,  Next: I18N Portability,  Prev: String Extraction,  Up: Translator i18n

Rearranging `printf' Arguments
------------------------------

   Format strings for `printf' and `sprintf' (*note Using `printf'
Statements for Fancier Printing: Printf.)  present a special problem
for translation.  Consider the following:(1)

     printf(_"String `%s' has %d characters\n",
               string, length(string)))

   A possible German translation for this might be:

     "%d Zeichen lang ist die Zeichenkette `%s'\n"

   The problem should be obvious: the order of the format
specifications is different from the original!  Even though `gettext'
can return the translated string at runtime, it cannot change the
argument order in the call to `printf'.

   To solve this problem, `printf' format specificiers may have an
additional optional element, which we call a "positional specifier".
For example:

     "%2$d Zeichen lang ist die Zeichenkette `%1$s'\n"

   Here, the positional specifier consists of an integer count, which
indicates which argument to use, and a `$'. Counts are one-based, and
the format string itself is _not_ included.  Thus, in the following
example, `string' is the first argument and `length(string)' is the
second:

     $ gawk 'BEGIN {
     >     string = "Dont Panic"
     >     printf _"%2$d characters live in \"%1$s\"\n",
     >                         string, length(string)
     > }'
     -| 10 characters live in "Dont Panic"

   If present, positional specifiers come first in the format
specification, before the flags, the field width, and/or the precision.

   Positional specifiers can be used with the dynamic field width and
precision capability:

     $ gawk 'BEGIN {
     >    printf("%*.*s\n", 10, 20, "hello")
     >    printf("%3$*2$.*1$s\n", 20, 10, "hello")
     > }'
     -|      hello
     -|      hello

*Note:* When using `*' with a positional specifier, the `*' comes
first, then the integer position, and then the `$'.  This is somewhat
counterintutive.

   `gawk' does not allow you to mix regular format specifiers and those
with positional specifiers in the same string:

     $ gawk 'BEGIN { printf _"%d %3$s\n", 1, 2, "hi" }'
     error--> gawk: cmd. line:1: fatal: must use `count$' on all formats or none

   *Note:* There are some pathological cases that `gawk' may fail to
diagnose.  In such cases, the output may not be what you expect.  It's
still a bad idea to try mixing them, even if `gawk' doesn't detect it.

   Although positional specifiers can be used directly in `awk'
programs, their primary purpose is to help in producing correct
translations of format strings into languages different from the one in
which the program is first written.

   ---------- Footnotes ----------

   (1) This example is borrowed from the GNU `gettext' manual.


File: gawk.info,  Node: I18N Portability,  Prev: Printf Ordering,  Up: Translator i18n

`awk' Portability Issues
------------------------

   `gawk''s internationalization features were purposely chosen to have
as little impact as possible on the portability of `awk' programs that
use them to other versions of `awk'.  Consider this program:

     BEGIN {
         TEXTDOMAIN = "guide"
         if (Test_Guide)   # set with -v
             bindtextdomain("/test/guide/messages")
         print _"don't panic!"
     }

As written, it won't work on other versions of `awk'.  However, it is
actually almost portable, requiring very little change:

   * Assignments to `TEXTDOMAIN' won't have any effect, since
     `TEXTDOMAIN' is not special in other `awk' implementations.

   * Non-GNU versions of `awk' treat marked strings as the
     concatenation of a variable named `_' with the string following
     it.(1) Typically, the variable `_' has the null string (`""') as
     its value, leaving the original string constant as the result.

   * By defining "dummy" functions to replace `dcgettext', `dcngettext'
     and `bindtextdomain', the `awk' program can be made to run, but
     all the messages are output in the original language.  For example:

          function bindtextdomain(dir, domain)
          {
              return dir
          }
          
          function dcgettext(string, domain, category)
          {
              return string
          }
          
          function dcngettext(string1, string2, number, domain, category)
          {
              return (number == 1 ? string1 : string2)
          }

   * The use of positional specifications in `printf' or `sprintf' is
     _not_ portable.  To support `gettext' at the C level, many
     systems' C versions of `sprintf' do support positional specifiers.
     But it works only if enough arguments are supplied in the
     function call.  Many versions of `awk' pass `printf' formats and
     arguments unchanged to the underlying C library version of
     `sprintf', but only one format and argument at a time.  What
     happens if a positional specification is used is anybody's guess.
     However, since the positional specifications are primarily for use
     in _translated_ format strings, and since non-GNU `awk's never
     retrieve the translated string, this should not be a problem in
     practice.

   ---------- Footnotes ----------

   (1) This is good fodder for an "Obfuscated `awk'" contest.


File: gawk.info,  Node: I18N Example,  Next: Gawk I18N,  Prev: Translator i18n,  Up: Internationalization

A Simple Internationalization Example
=====================================

   Now let's look at a step-by-step example of how to internationalize
and localize a simple `awk' program, using `guide.awk' as our original
source:

     BEGIN {
         TEXTDOMAIN = "guide"
         bindtextdomain(".")  # for testing
         print _"Don't Panic"
         print _"The Answer Is", 42
         print "Pardon me, Zaphod who?"
     }

Run `gawk --gen-po' to create the `.po' file:

     $ gawk --gen-po -f guide.awk > guide.po

This produces:

     #: guide.awk:4
     msgid "Don't Panic"
     msgstr ""
     
     #: guide.awk:5
     msgid "The Answer Is"
     msgstr ""

   This original portable object file is saved and reused for each
language into which the application is translated.  The `msgid' is the
original string and the `msgstr' is the translation.

   *Note:* Strings not marked with a leading underscore do not appear
in the `guide.po' file.

   Next, the messages must be translated.  Here is a translation to a
hypothetical dialect of English, called "Mellow":(1)

     $ cp guide.po guide-mellow.po
     ADD TRANSLATIONS TO guide-mellow.po ...

Following are the translations:

     #: guide.awk:4
     msgid "Don't Panic"
     msgstr "Hey man, relax!"
     
     #: guide.awk:5
     msgid "The Answer Is"
     msgstr "Like, the scoop is"

   The next step is to make the directory to hold the binary message
object file and then to create the `guide.mo' file.  The directory
layout shown here is standard for GNU `gettext' on GNU/Linux systems.
Other versions of `gettext' may use a different layout:

     $ mkdir en_US en_US/LC_MESSAGES

   The `msgfmt' utility does the conversion from human-readable `.po'
file to machine-readable `.mo' file.  By default, `msgfmt' creates a
file named `messages'.  This file must be renamed and placed in the
proper directory so that `gawk' can find it:

     $ msgfmt guide-mellow.po
     $ mv messages en_US/LC_MESSAGES/guide.mo

   Finally, we run the program to test it:

     $ gawk -f guide.awk
     -| Hey man, relax!
     -| Like, the scoop is 42
     -| Pardon me, Zaphod who?

   If the three replacement functions for `dcgettext', `dcngettext' and
`bindtextdomain' (*note `awk' Portability Issues: I18N Portability.)
are in a file named `libintl.awk', then we can run `guide.awk'
unchanged as follows:

     $ gawk --posix -f guide.awk -f libintl.awk
     -| Don't Panic
     -| The Answer Is 42
     -| Pardon me, Zaphod who?

   ---------- Footnotes ----------

   (1) Perhaps it would be better if it were called "Hippy." Ah, well.


File: gawk.info,  Node: Gawk I18N,  Prev: I18N Example,  Up: Internationalization

`gawk' Can Speak Your Language
==============================

   As of version 3.1, `gawk' itself has been internationalized using
the GNU `gettext' package.  (GNU `gettext' is described in complete
detail in *Note Top::.)  As of this writing, the latest version of GNU
`gettext' is version 0.11.1
(ftp://ftp.gnu.org/gnu/gettext/gettext-0.11.1.tar.gz).

   If a translation of `gawk''s messages exists, then `gawk' produces
usage messages, warnings, and fatal errors in the local language.

   On systems that do not use version 2 (or later) of the GNU C
library, you should configure `gawk' with the `--with-included-gettext'
option before compiling and installing it.  *Note Additional
Configuration Options::, for more information.


File: gawk.info,  Node: Advanced Features,  Next: Invoking Gawk,  Prev: Internationalization,  Up: Top

Advanced Features of `gawk'
***************************

     Write documentation as if whoever reads it is a violent psychopath
     who knows where you live.
     Steve English, as quoted by Peter Langston

   This major node discusses advanced features in `gawk'.  It's a bit
of a "grab bag" of items that are otherwise unrelated to each other.
First, a command-line option allows `gawk' to recognize nondecimal
numbers in input data, not just in `awk' programs.  Next, two-way I/O,
discussed briefly in earlier parts of this Info file, is described in
full detail, along with the basics of TCP/IP networking and BSD portal
files.  Finally, `gawk' can "profile" an `awk' program, making it
possible to tune it for performance.

   *Note Adding New Built-in Functions to `gawk': Dynamic Extensions,
discusses the ability to dynamically add new built-in functions to
`gawk'.  As this feature is still immature and likely to change, its
description is relegated to an appendix.

* Menu:

* Nondecimal Data::             Allowing nondecimal input data.
* Two-way I/O::                 Two-way communications with another process.
* TCP/IP Networking::           Using `gawk' for network programming.
* Portal Files::                Using `gawk' with BSD portals.
* Profiling::                   Profiling your `awk' programs.


File: gawk.info,  Node: Nondecimal Data,  Next: Two-way I/O,  Prev: Advanced Features,  Up: Advanced Features

Allowing Nondecimal Input Data
==============================

   If you run `gawk' with the `--non-decimal-data' option, you can have
nondecimal constants in your input data:

     $ echo 0123 123 0x123 |
     > gawk --non-decimal-data '{ printf "%d, %d, %d\n",
     >                                         $1, $2, $3 }'
     -| 83, 123, 291

   For this feature to work, write your program so that `gawk' treats
your data as numeric:

     $ echo 0123 123 0x123 | gawk '{ print $1, $2, $3 }'
     -| 0123 123 0x123

The `print' statement treats its expressions as strings.  Although the
fields can act as numbers when necessary, they are still strings, so
`print' does not try to treat them numerically.  You may need to add
zero to a field to force it to be treated as a number.  For example:

     $ echo 0123 123 0x123 | gawk --non-decimal-data '
     > { print $1, $2, $3
     >   print $1 + 0, $2 + 0, $3 + 0 }'
     -| 0123 123 0x123
     -| 83 123 291

   Because it is common to have decimal data with leading zeros, and
because using it could lead to surprising results, the default is to
leave this facility disabled.  If you want it, you must explicitly
request it.

   *Caution:* _Use of this option is not recommended._ It can break old
programs very badly.  Instead, use the `strtonum' function to convert
your data (*note Octal and Hexadecimal Numbers: Nondecimal-numbers.).
This makes your programs easier to write and easier to read, and leads
to less surprising results.


File: gawk.info,  Node: Two-way I/O,  Next: TCP/IP Networking,  Prev: Nondecimal Data,  Up: Advanced Features

Two-Way Communications with Another Process
===========================================

     From: brennan@whidbey.com (Mike Brennan)
     Newsgroups: comp.lang.awk
     Subject: Re: Learn the SECRET to Attract Women Easily
     Date: 4 Aug 1997 17:34:46 GMT
     Message-ID: <5s53rm$eca@news.whidbey.com>
     
     On 3 Aug 1997 13:17:43 GMT, Want More Dates???
     <tracy78@kilgrona.com> wrote:
     >Learn the SECRET to Attract Women Easily
     >
     >The SCENT(tm)  Pheromone Sex Attractant For Men to Attract Women
     
     The scent of awk programmers is a lot more attractive to women than
     the scent of perl programmers.
     --
     Mike Brennan

   It is often useful to be able to send data to a separate program for
processing and then read the result.  This can always be done with
temporary files:

     # write the data for processing
     tempfile = ("/tmp/mydata." PROCINFO["pid"])
     while (NOT DONE WITH DATA)
         print DATA | ("subprogram > " tempfile)
     close("subprogram > " tempfile)
     
     # read the results, remove tempfile when done
     while ((getline newdata < tempfile) > 0)
         PROCESS newdata APPROPRIATELY
     close(tempfile)
     system("rm " tempfile)

This works, but not elegantly.

   Starting with version 3.1 of `gawk', it is possible to open a
_two-way_ pipe to another process.  The second process is termed a
"coprocess", since it runs in parallel with `gawk'.  The two-way
connection is created using the new `|&' operator (borrowed from the
Korn shell, `ksh'):(1)

     do {
         print DATA |& "subprogram"
         "subprogram" |& getline results
     } while (DATA LEFT TO PROCESS)
     close("subprogram")

   The first time an I/O operation is executed using the `|&' operator,
`gawk' creates a two-way pipeline to a child process that runs the
other program.  Output created with `print' or `printf' is written to
the program's standard input, and output from the program's standard
output can be read by the `gawk' program using `getline'.  As is the
case with processes started by `|', the subprogram can be any program,
or pipeline of programs, that can be started by the shell.

   There are some cautionary items to be aware of:

   * As the code inside `gawk' currently stands, the coprocess's
     standard error goes to the same place that the parent `gawk''s
     standard error goes. It is not possible to read the child's
     standard error separately.

     </itemizedlist>

   * I/O buffering may be a problem.  `gawk' automatically flushes all
     output down the pipe to the child process.  However, if the
     coprocess does not flush its output, `gawk' may hang when doing a
     `getline' in order to read the coprocess's results.  This could
     lead to a situation known as "deadlock", where each process is
     waiting for the other one to do something.

   It is possible to close just one end of the two-way pipe to a
coprocess, by supplying a second argument to the `close' function of
either `"to"' or `"from"' (*note Closing Input and Output Redirections:
Close Files And Pipes.).  These strings tell `gawk' to close the end of
the pipe that sends data to the process or the end that reads from it,
respectively.

   This is particularly necessary in order to use the system `sort'
utility as part of a coprocess; `sort' must read _all_ of its input
data before it can produce any output.  The `sort' program does not
receive an end-of-file indication until `gawk' closes the write end of
the pipe.

   When you have finished writing data to the `sort' utility, you can
close the `"to"' end of the pipe, and then start reading sorted data
via `getline'.  For example:

     BEGIN {
         command = "LC_ALL=C sort"
         n = split("abcdefghijklmnopqrstuvwxyz", a, "")
     
         for (i = n; i > 0; i--)
             print a[i] |& command
         close(command, "to")
     
         while ((command |& getline line) > 0)
             print "got", line
         close(command)
     }

   This program writes the letters of the alphabet in reverse order, one
per line, down the two-way pipe to `sort'.  It then closes the write
end of the pipe, so that `sort' receives an end-of-file indication.
This causes `sort' to sort the data and write the sorted data back to
the `gawk' program.  Once all of the data has been read, `gawk'
terminates the coprocess and exits.

   As a side note, the assignment `LC_ALL=C' in the `sort' command
ensures traditional Unix (ASCII) sorting from `sort'.

   ---------- Footnotes ----------

   (1) This is very different from the same operator in the C shell,
`csh'.


File: gawk.info,  Node: TCP/IP Networking,  Next: Portal Files,  Prev: Two-way I/O,  Up: Advanced Features

Using `gawk' for Network Programming
====================================

     `EMISTERED': A host is a host from coast to coast,
     and no-one can talk to host that's close,
     unless the host that isn't close
     is busy hung or dead.

   In addition to being able to open a two-way pipeline to a coprocess
on the same system (*note Two-Way Communications with Another Process:
Two-way I/O.), it is possible to make a two-way connection to another
process on another system across an IP networking connection.

   You can think of this as just a _very long_ two-way pipeline to a
coprocess.  The way `gawk' decides that you want to use TCP/IP
networking is by recognizing special file names that begin with
`/inet/'.

   The full syntax of the special file name is
`/inet/PROTOCOL/LOCAL-PORT/REMOTE-HOST/REMOTE-PORT'.  The components
are:

PROTOCOL
     The protocol to use over IP.  This must be either `tcp', `udp', or
     `raw', for a TCP, UDP, or raw IP connection, respectively.  The
     use of TCP is recommended for most applications.

     *Caution:* The use of raw sockets is not currently supported in
     version 3.1 of `gawk'.

LOCAL-PORT
     The local TCP or UDP port number to use.  Use a port number of `0'
     when you want the system to pick a port. This is what you should do
     when writing a TCP or UDP client.  You may also use a well-known
     service name, such as `smtp' or `http', in which case `gawk'
     attempts to determine the predefined port number using the C
     `getservbyname' function.

REMOTE-HOST
     The IP address or fully-qualified domain name of the Internet host
     to which you want to connect.

REMOTE-PORT
     The TCP or UDP port number to use on the given REMOTE-HOST.
     Again, use `0' if you don't care, or else a well-known service
     name.

   Consider the following very simple example:

     BEGIN {
       Service = "/inet/tcp/0/localhost/daytime"
       Service |& getline
       print $0
       close(Service)
     }

   This program reads the current date and time from the local system's
TCP `daytime' server.  It then prints the results and closes the
connection.

   Because this topic is extensive, the use of `gawk' for TCP/IP
programming is documented separately.  *Note Top::, for a much more
complete introduction and discussion, as well as extensive examples.


File: gawk.info,  Node: Portal Files,  Next: Profiling,  Prev: TCP/IP Networking,  Up: Advanced Features

Using `gawk' with BSD Portals
=============================

   Similar to the `/inet' special files, if `gawk' is configured with
the `--enable-portals' option (*note Compiling `gawk' for Unix: Quick
Installation.), then `gawk' treats files whose pathnames begin with
`/p' as 4.4 BSD-style portals.

   When used with the `|&' operator, `gawk' opens the file for two-way
communications.  The operating system's portal mechanism then manages
creating the process associated with the portal and the corresponding
communications with the portal's process.


File: gawk.info,  Node: Profiling,  Prev: Portal Files,  Up: Advanced Features

Profiling Your `awk' Programs
=============================

   Beginning with version 3.1 of `gawk', you may produce execution
traces of your `awk' programs.  This is done with a specially compiled
version of `gawk', called `pgawk' ("profiling `gawk'").

   `pgawk' is identical in every way to `gawk', except that when it has
finished running, it creates a profile of your program in a file named
`awkprof.out'.  Because it is profiling, it also executes up to 45%
slower than `gawk' normally does.

   As shown in the following example, the `--profile' option can be
used to change the name of the file where `pgawk' will write the
profile:

     $ pgawk --profile=myprog.prof -f myprog.awk data1 data2

In the above example, `pgawk' places the profile in `myprog.prof'
instead of in `awkprof.out'.

   Regular `gawk' also accepts this option.  When called with just
`--profile', `gawk' "pretty prints" the program into `awkprof.out',
without any execution counts.  You may supply an option to `--profile'
to change the file name.  Here is a sample session showing a simple
`awk' program, its input data, and the results from running `pgawk'.
First, the `awk' program:

     BEGIN { print "First BEGIN rule" }
     
     END { print "First END rule" }
     
     /foo/ {
         print "matched /foo/, gosh"
         for (i = 1; i <= 3; i++)
             sing()
     }
     
     {
         if (/foo/)
             print "if is true"
         else
             print "else is true"
     }
     
     BEGIN { print "Second BEGIN rule" }
     
     END { print "Second END rule" }
     
     function sing(    dummy)
     {
         print "I gotta be me!"
     }

   Following is the input data:

     foo
     bar
     baz
     foo
     junk

   Here is the `awkprof.out' that results from running `pgawk' on this
program and data (this example also illustrates that `awk' programmers
sometimes have to work late):

             # gawk profile, created Sun Aug 13 00:00:15 2000
     
             # BEGIN block(s)
     
             BEGIN {
          1          print "First BEGIN rule"
          1          print "Second BEGIN rule"
             }
     
             # Rule(s)
     
          5  /foo/   { # 2
          2          print "matched /foo/, gosh"
          6          for (i = 1; i <= 3; i++) {
          6                  sing()
                     }
             }
     
          5  {
          5          if (/foo/) { # 2
          2                  print "if is true"
          3          } else {
          3                  print "else is true"
                     }
             }
     
             # END block(s)
     
             END {
          1          print "First END rule"
          1          print "Second END rule"
             }
     
             # Functions, listed alphabetically
     
          6  function sing(dummy)
             {
          6          print "I gotta be me!"
             }

   This example illustrates many of the basic rules for profiling
output.  The rules are as follows:

   * The program is printed in the order `BEGIN' rule, pattern/action
     rules, `END' rule and functions, listed alphabetically.  Multiple
     `BEGIN' and `END' rules are merged together.

   * Pattern-action rules have two counts.  The first count, to the
     left of the rule, shows how many times the rule's pattern was
     _tested_.  The second count, to the right of the rule's opening
     left brace in a comment, shows how many times the rule's action
     was _executed_.  The difference between the two indicates how many
     times the rule's pattern evaluated to false.

   * Similarly, the count for an `if'-`else' statement shows how many
     times the condition was tested.  To the right of the opening left
     brace for the `if''s body is a count showing how many times the
     condition was true.  The count for the `else' indicates how many
     times the test failed.

   * The count for a loop header (such as `for' or `while') shows how
     many times the loop test was executed.  (Because of this, you
     can't just look at the count on the first statement in a rule to
     determine how many times the rule was executed.  If the first
     statement is a loop, the count is misleading.)

   * For user-defined functions, the count next to the `function'
     keyword indicates how many times the function was called.  The
     counts next to the statements in the body show how many times
     those statements were executed.

   * The layout uses "K&R" style with tabs.  Braces are used
     everywhere, even when the body of an `if', `else', or loop is only
     a single statement.

   * Parentheses are used only where needed, as indicated by the
     structure of the program and the precedence rules.  For example,
     `(3 + 5) * 4' means add three plus five, then multiply the total
     by four.  However, `3 + 5 * 4' has no parentheses, and means `3 +
     (5 * 4)'.

   * All string concatenations are parenthesized too.  (This could be
     made a bit smarter.)

   * Parentheses are used around the arguments to `print' and `printf'
     only when the `print' or `printf' statement is followed by a
     redirection.  Similarly, if the target of a redirection isn't a
     scalar, it gets parenthesized.

   * `pgawk' supplies leading comments in front of the `BEGIN' and
     `END' rules, the pattern/action rules, and the functions.


   The profiled version of your program may not look exactly like what
you typed when you wrote it.  This is because `pgawk' creates the
profiled version by "pretty printing" its internal representation of
the program.  The advantage to this is that `pgawk' can produce a
standard representation.  The disadvantage is that all source-code
comments are lost, as are the distinctions among multiple `BEGIN' and
`END' rules.  Also, things such as:

     /foo/

come out as:

     /foo/   {
         print $0
     }

which is correct, but possibly surprising.

   Besides creating profiles when a program has completed, `pgawk' can
produce a profile while it is running.  This is useful if your `awk'
program goes into an infinite loop and you want to see what has been
executed.  To use this feature, run `pgawk' in the background:

     $ pgawk -f myprog &
     [1] 13992

The shell prints a job number and process ID number; in this case,
13992.  Use the `kill' command to send the `USR1' signal to `pgawk':

     $ kill -USR1 13992

As usual, the profiled version of the program is written to
`awkprof.out', or to a different file if you use the `--profile' option.

   Along with the regular profile, as shown earlier, the profile
includes a trace of any active functions:

     # Function Call Stack:
     
     #   3. baz
     #   2. bar
     #   1. foo
     # -- main --

   You may send `pgawk' the `USR1' signal as many times as you like.
Each time, the profile and function call trace are appended to the
output profile file.

   If you use the `HUP' signal instead of the `USR1' signal, `pgawk'
produces the profile and the function call trace and then exits.

   When `pgawk' runs on MS-DOS or MS-Windows, it uses the `INT' and
`QUIT' signals for producing the profile and, in the case of the `INT'
signal, `pgawk' exits.  This is because these systems don't support the
`kill' command, so the only signals you can deliver to a program are
those generated by the keyboard.  The `INT' signal is generated by the
`Ctrl-<C>' or `Ctrl-<BREAK>' key, while the `QUIT' signal is generated
by the `Ctrl-<\>' key.


File: gawk.info,  Node: Invoking Gawk,  Next: Library Functions,  Prev: Advanced Features,  Up: Top

Running `awk' and `gawk'
************************

   This major node covers how to run awk, both POSIX-standard and
`gawk'-specific command-line options, and what `awk' and `gawk' do with
non-option arguments.  It then proceeds to cover how `gawk' searches
for source files, obsolete options and/or features, and known bugs in
`gawk'.  This major node rounds out the discussion of `awk' as a
program and as a language.

   While a number of the options and features described here were
discussed in passing earlier in the book, this major node provides the
full details.

* Menu:

* Command Line::                How to run `awk'.
* Options::                     Command-line options and their meanings.
* Other Arguments::             Input file names and variable assignments.
* AWKPATH Variable::            Searching directories for `awk'
                                programs.
* Obsolete::                    Obsolete Options and/or features.
* Undocumented::                Undocumented Options and Features.
* Known Bugs::                  Known Bugs in `gawk'.


File: gawk.info,  Node: Command Line,  Next: Options,  Prev: Invoking Gawk,  Up: Invoking Gawk

Invoking `awk'
==============

   There are two ways to run `awk'--with an explicit program or with
one or more program files.  Here are templates for both of them; items
enclosed in [...] in these templates are optional:

     awk [OPTIONS] -f progfile [`--'] FILE ...
     awk [OPTIONS] [`--'] 'PROGRAM' FILE ...

   Besides traditional one-letter POSIX-style options, `gawk' also
supports GNU long options.

   It is possible to invoke `awk' with an empty program:

     awk '' datafile1 datafile2

Doing so makes little sense, though; `awk' exits silently when given an
empty program.  (d.c.)  If `--lint' has been specified on the command
line, `gawk' issues a warning that the program is empty.


File: gawk.info,  Node: Options,  Next: Other Arguments,  Prev: Command Line,  Up: Invoking Gawk

Command-Line Options
====================

   Options begin with a dash and consist of a single character.
GNU-style long options consist of two dashes and a keyword.  The
keyword can be abbreviated, as long as the abbreviation allows the
option to be uniquely identified.  If the option takes an argument,
then the keyword is either immediately followed by an equals sign (`=')
and the argument's value, or the keyword and the argument's value are
separated by whitespace.  If a particular option with a value is given
more than once, it is the last value that counts.

   Each long option for `gawk' has a corresponding POSIX-style option.
The long and short options are interchangeable in all contexts.  The
options and their meanings are as follows:

`-F FS'
`--field-separator FS'
     Sets the `FS' variable to FS (*note Specifying How Fields Are
     Separated: Field Separators.).

`-f SOURCE-FILE'
`--file SOURCE-FILE'
     Indicates that the `awk' program is to be found in SOURCE-FILE
     instead of in the first non-option argument.

`-v VAR=VAL'
`--assign VAR=VAL'
     Sets the variable VAR to the value VAL _before_ execution of the
     program begins.  Such variable values are available inside the
     `BEGIN' rule (*note Other Command-Line Arguments: Other
     Arguments.).

     The `-v' option can only set one variable, but it can be used more
     than once, setting another variable each time, like this: `awk
     -v foo=1 -v bar=2 ...'.

     *Caution:*  Using `-v' to set the values of the built-in variables
     may lead to surprising results.  `awk' will reset the values of
     those variables as it needs to, possibly ignoring any predefined
     value you may have given.

`-mf N'
`-mr N'
     Sets various memory limits to the value N.  The `f' flag sets the
     maximum number of fields and the `r' flag sets the maximum record
     size.  These two flags and the `-m' option are from the Bell
     Laboratories research version of Unix `awk'.  They are provided
     for compatibility but otherwise ignored by `gawk', since `gawk'
     has no predefined limits.  (The Bell Laboratories `awk' no longer
     needs these options; it continues to accept them to avoid breaking
     old programs.)

`-W GAWK-OPT'
     Following the POSIX standard, implementation-specific options are
     supplied as arguments to the `-W' option.  These options also have
     corresponding GNU-style long options.  Note that the long options
     may be abbreviated, as long as the abbreviations remain unique.
     The full list of `gawk'-specific options is provided next.

`--'
     Signals the end of the command-line options.  The following
     arguments are not treated as options even if they begin with `-'.
     This interpretation of `--' follows the POSIX argument parsing
     conventions.

     This is useful if you have file names that start with `-', or in
     shell scripts, if you have file names that will be specified by
     the user that could start with `-'.

   The previous list described options mandated by the POSIX standard,
as well as options available in the Bell Laboratories version of `awk'.
The following list describes `gawk'-specific options:

`-W compat'
`-W traditional'
`--compat'
`--traditional'
     Specifies "compatibility mode", in which the GNU extensions to the
     `awk' language are disabled, so that `gawk' behaves just like the
     Bell Laboratories research version of Unix `awk'.  `--traditional'
     is the preferred form of this option.  *Note Extensions in `gawk'
     Not in POSIX `awk': POSIX/GNU, which summarizes the extensions.
     Also see *Note Downward Compatibility and Debugging: Compatibility
     Mode.

`-W copyright'
`--copyright'
     Print the short version of the General Public License and then
     exit.

`-W copyleft'
`--copyleft'
     Just like `--copyright'.  This option may disappear in a future
     version of `gawk'.

`-W dump-variables[=FILE]'
`--dump-variables[=FILE]'
     Prints a sorted list of global variables, their types, and final
     values to FILE.  If no FILE is provided, `gawk' prints this list
     to the file named `awkvars.out' in the current directory.

     Having a list of all global variables is a good way to look for
     typographical errors in your programs.  You would also use this
     option if you have a large program with a lot of functions, and
     you want to be sure that your functions don't inadvertently use
     global variables that you meant to be local.  (This is a
     particularly easy mistake to make with simple variable names like
     `i', `j', etc.)

`-W gen-po'
`--gen-po'
     Analyzes the source program and generates a GNU `gettext' Portable
     Object file on standard output for all string constants that have
     been marked for translation.  *Note Internationalization with
     `gawk': Internationalization, for information about this option.

`-W help'
`-W usage'
`--help'
`--usage'
     Prints a "usage" message summarizing the short and long style
     options that `gawk' accepts and then exit.

`-W lint[=fatal]'
`--lint[=fatal]'
     Warns about constructs that are dubious or nonportable to other
     `awk' implementations.  Some warnings are issued when `gawk' first
     reads your program.  Others are issued at runtime, as your program
     executes.  With an optional argument of `fatal', lint warnings
     become fatal errors.  This may be drastic, but its use will
     certainly encourage the development of cleaner `awk' programs.

`-W lint-old'
`--lint-old'
     Warns about constructs that are not available in the original
     version of `awk' from Version 7 Unix (*note Major Changes Between
     V7 and SVR3.1: V7/SVR3.1.).

`-W non-decimal-data'
`--non-decimal-data'
     Enable automatic interpretation of octal and hexadecimal values in
     input data (*note Allowing Nondecimal Input Data: Nondecimal
     Data.).

     *Caution:* This option can severely break old programs.  Use with
     care.

`-W posix'
`--posix'
     Operates in strict POSIX mode.  This disables all `gawk'
     extensions (just like `--traditional') and adds the following
     additional restrictions:

        * `\x' escape sequences are not recognized (*note Escape
          Sequences::).

        * Newlines do not act as whitespace to separate fields when
          `FS' is equal to a single space (*note Examining Fields:
          Fields.).

        * Newlines are not allowed after `?' or `:' (*note Conditional
          Expressions: Conditional Exp.).

        * The synonym `func' for the keyword `function' is not
          recognized (*note Function Definition Syntax: Definition
          Syntax.).

        * The `**' and `**=' operators cannot be used in place of `^'
          and `^=' (*note Arithmetic Operators: Arithmetic Ops., and
          also *note Assignment Expressions: Assignment Ops.).

        * Specifying `-Ft' on the command-line does not set the value
          of `FS' to be a single TAB character (*note Specifying How
          Fields Are Separated: Field Separators.).

        * The `fflush' built-in function is not supported (*note
          Input/Output Functions: I/O Functions.).

     If you supply both `--traditional' and `--posix' on the command
     line, `--posix' takes precedence. `gawk' also issues a warning if
     both options are supplied.

`-W profile[=FILE]'
`--profile[=FILE]'
     Enable profiling of `awk' programs (*note Profiling Your `awk'
     Programs: Profiling.).  By default, profiles are created in a file
     named `awkprof.out'.  The optional FILE argument allows you to
     specify a different file name for the profile file.

     When run with `gawk', the profile is just a "pretty printed"
     version of the program.  When run with `pgawk', the profile
     contains execution counts for each statement in the program in the
     left margin, and function call counts for each function.

`-W re-interval'
`--re-interval'
     Allows interval expressions (*note Regular Expression Operators:
     Regexp Operators.)  in regexps.  Because interval expressions were
     traditionally not available in `awk', `gawk' does not provide them
     by default. This prevents old `awk' programs from breaking.

`-W source PROGRAM-TEXT'
`--source PROGRAM-TEXT'
     Allows you to mix source code in files with source code that you
     enter on the command line.  Program source code is taken from the
     PROGRAM-TEXT.  This is particularly useful when you have library
     functions that you want to use from your command-line programs
     (*note The `AWKPATH' Environment Variable: AWKPATH Variable.).

`-W version'
`--version'
     Prints version information for this particular copy of `gawk'.
     This allows you to determine if your copy of `gawk' is up to date
     with respect to whatever the Free Software Foundation is currently
     distributing.  It is also useful for bug reports (*note Reporting
     Problems and Bugs: Bugs.).

   As long as program text has been supplied, any other options are
flagged as invalid with a warning message but are otherwise ignored.

   In compatibility mode, as a special case, if the value of FS supplied
to the `-F' option is `t', then `FS' is set to the TAB character
(`"\t"').  This is true only for `--traditional' and not for `--posix'
(*note Specifying How Fields Are Separated: Field Separators.).

   The `-f' option may be used more than once on the command line.  If
it is, `awk' reads its program source from all of the named files, as
if they had been concatenated together into one big file.  This is
useful for creating libraries of `awk' functions.  These functions can
be written once and then retrieved from a standard place, instead of
having to be included into each individual program.  (As mentioned in
*Note Function Definition Syntax: Definition Syntax, function names
must be unique.)

   Library functions can still be used, even if the program is entered
at the terminal, by specifying `-f /dev/tty'.  After typing your
program, type `Ctrl-d' (the end-of-file character) to terminate it.
(You may also use `-f -' to read program source from the standard input
but then you will not be able to also use the standard input as a
source of data.)

   Because it is clumsy using the standard `awk' mechanisms to mix
source file and command-line `awk' programs, `gawk' provides the
`--source' option.  This does not require you to pre-empt the standard
input for your source code; it allows you to easily mix command-line
and library source code (*note The `AWKPATH' Environment Variable:
AWKPATH Variable.).

   If no `-f' or `--source' option is specified, then `gawk' uses the
first non-option command-line argument as the text of the program
source code.

   If the environment variable `POSIXLY_CORRECT' exists, then `gawk'
behaves in strict POSIX mode, exactly as if you had supplied the
`--posix' command-line option.  Many GNU programs look for this
environment variable to turn on strict POSIX mode. If `--lint' is
supplied on the command line and `gawk' turns on POSIX mode because of
`POSIXLY_CORRECT', then it issues a warning message indicating that
POSIX mode is in effect.  You would typically set this variable in your
shell's startup file.  For a Bourne-compatible shell (such as `bash'),
you would add these lines to the `.profile' file in your home directory:

     POSIXLY_CORRECT=true
     export POSIXLY_CORRECT

   For a `csh'-compatible shell,(1) you would add this line to the
`.login' file in your home directory:

     setenv POSIXLY_CORRECT true

   Having `POSIXLY_CORRECT' set is not recommended for daily use, but
it is good for testing the portability of your programs to other
environments.

   ---------- Footnotes ----------

   (1) Not recommended.


File: gawk.info,  Node: Other Arguments,  Next: AWKPATH Variable,  Prev: Options,  Up: Invoking Gawk

Other Command-Line Arguments
============================

   Any additional arguments on the command line are normally treated as
input files to be processed in the order specified.   However, an
argument that has the form `VAR=VALUE', assigns the value VALUE to the
variable VAR--it does not specify a file at all.  (This was discussed
earlier in *Note Assigning Variables on the Command Line: Assignment
Options.)

   All these arguments are made available to your `awk' program in the
`ARGV' array (*note Built-in Variables::).  Command-line options and
the program text (if present) are omitted from `ARGV'.  All other
arguments, including variable assignments, are included.   As each
element of `ARGV' is processed, `gawk' sets the variable `ARGIND' to
the index in `ARGV' of the current element.

   The distinction between file name arguments and variable-assignment
arguments is made when `awk' is about to open the next input file.  At
that point in execution, it checks the file name to see whether it is
really a variable assignment; if so, `awk' sets the variable instead of
reading a file.

   Therefore, the variables actually receive the given values after all
previously specified files have been read.  In particular, the values of
variables assigned in this fashion are _not_ available inside a `BEGIN'
rule (*note The `BEGIN' and `END' Special Patterns: BEGIN/END.),
because such rules are run before `awk' begins scanning the argument
list.

   The variable values given on the command line are processed for
escape sequences (*note Escape Sequences::).  (d.c.)

   In some earlier implementations of `awk', when a variable assignment
occurred before any file names, the assignment would happen _before_
the `BEGIN' rule was executed.  `awk''s behavior was thus inconsistent;
some command-line assignments were available inside the `BEGIN' rule,
while others were not.  Unfortunately, some applications came to depend
upon this "feature."  When `awk' was changed to be more consistent, the
`-v' option was added to accommodate applications that depended upon
the old behavior.

   The variable assignment feature is most useful for assigning to
variables such as `RS', `OFS', and `ORS', which control input and
output formats before scanning the data files.  It is also useful for
controlling state if multiple passes are needed over a data file.  For
example:

     awk 'pass == 1  { PASS 1 STUFF }
          pass == 2  { PASS 2 STUFF }' pass=1 mydata pass=2 mydata

   Given the variable assignment feature, the `-F' option for setting
the value of `FS' is not strictly necessary.  It remains for historical
compatibility.


File: gawk.info,  Node: AWKPATH Variable,  Next: Obsolete,  Prev: Other Arguments,  Up: Invoking Gawk

The `AWKPATH' Environment Variable
==================================

   The previous minor node described how `awk' program files can be
named on the command-line with the `-f' option.  In most `awk'
implementations, you must supply a precise path name for each program
file, unless the file is in the current directory.  But in `gawk', if
the file name supplied to the `-f' option does not contain a `/', then
`gawk' searches a list of directories (called the "search path"), one
by one, looking for a file with the specified name.

   The search path is a string consisting of directory names separated
by colons.  `gawk' gets its search path from the `AWKPATH' environment
variable.  If that variable does not exist, `gawk' uses a default path,
`.:/usr/local/share/awk'.(1) (Programs written for use by system
administrators should use an `AWKPATH' variable that does not include
the current directory, `.'.)

   The search path feature is particularly useful for building libraries
of useful `awk' functions.  The library files can be placed in a
standard directory in the default path and then specified on the
command line with a short file name.  Otherwise, the full file name
would have to be typed for each file.

   By using both the `--source' and `-f' options, your command-line
`awk' programs can use facilities in `awk' library files (*note A
Library of `awk' Functions: Library Functions.).  Path searching is not
done if `gawk' is in compatibility mode.  This is true for both
`--traditional' and `--posix'.  *Note Command-Line Options: Options.

   *Note:* If you want files in the current directory to be found, you
must include the current directory in the path, either by including `.'
explicitly in the path or by writing a null entry in the path.  (A null
entry is indicated by starting or ending the path with a colon or by
placing two colons next to each other (`::').)  If the current
directory is not included in the path, then files cannot be found in
the current directory.  This path search mechanism is identical to the
shell's.

   Starting with version 3.0, if `AWKPATH' is not defined in the
environment, `gawk' places its default search path into
`ENVIRON["AWKPATH"]'. This makes it easy to determine the actual search
path that `gawk' will use from within an `awk' program.

   While you can change `ENVIRON["AWKPATH"]' within your `awk' program,
this has no effect on the running program's behavior.  This makes
sense: the `AWKPATH' environment variable is used to find the program
source files.  Once your program is running, all the files have been
found, and `gawk' no longer needs to use `AWKPATH'.

   ---------- Footnotes ----------

   (1) Your version of `gawk' may use a different directory; it will
depend upon how `gawk' was built and installed. The actual directory is
the value of `$(datadir)' generated when `gawk' was configured.  You
probably don't need to worry about this, though.


File: gawk.info,  Node: Obsolete,  Next: Undocumented,  Prev: AWKPATH Variable,  Up: Invoking Gawk

Obsolete Options and/or Features
================================

   This minor node describes features and/or command-line options from
previous releases of `gawk' that are either not available in the
current version or that are still supported but deprecated (meaning that
they will _not_ be in the next release).

   For version 3.1 of `gawk', there are no deprecated command-line
options from the previous version of `gawk'.  The use of `next file'
(two words) for `nextfile' was deprecated in `gawk' 3.0 but still
worked.  Starting with version 3.1, the two-word usage is no longer
accepted.

   The process-related special files described in *Note Special Files
for Process-Related Information: Special Process, work as described, but
are now considered deprecated.  `gawk' prints a warning message every
time they are used.  (Use `PROCINFO' instead; see *Note Built-in
Variables That Convey Information: Auto-set.)  They will be removed
from the next release of `gawk'.


File: gawk.info,  Node: Undocumented,  Next: Known Bugs,  Prev: Obsolete,  Up: Invoking Gawk

Undocumented Options and Features
=================================

     Use the Source, Luke!
     Obi-Wan

   This minor node intentionally left blank.


File: gawk.info,  Node: Known Bugs,  Prev: Undocumented,  Up: Invoking Gawk

Known Bugs in `gawk'
====================

   * The `-F' option for changing the value of `FS' (*note Command-Line
     Options: Options.)  is not necessary given the command-line
     variable assignment feature; it remains only for backward
     compatibility.

   * Syntactically invalid single-character programs tend to overflow
     the parse stack, generating a rather unhelpful message.  Such
     programs are surprisingly difficult to diagnose in the completely
     general case, and the effort to do so really is not worth it.


File: gawk.info,  Node: Library Functions,  Next: Sample Programs,  Prev: Invoking Gawk,  Up: Top

A Library of `awk' Functions
****************************

   *Note User-Defined Functions: User-defined, describes how to write
your own `awk' functions.  Writing functions is important, because it
allows you to encapsulate algorithms and program tasks in a single
place.  It simplifies programming, making program development more
manageable, and making programs more readable.

   One valuable way to learn a new programming language is to _read_
programs in that language.  To that end, this major node and *Note
Practical `awk' Programs: Sample Programs, provide a good-sized body of
code for you to read, and hopefully, to learn from.

   This major node presents a library of useful `awk' functions.  Many
of the sample programs presented later in this Info file use these
functions.  The functions are presented here in a progression from
simple to complex.

   *Note Extracting Programs from Texinfo Source Files: Extract Program,
presents a program that you can use to extract the source code for
these example library functions and programs from the Texinfo source
for this Info file.  (This has already been done as part of the `gawk'
distribution.)

   If you have written one or more useful, general-purpose `awk'
functions and would like to contribute them to the author's collection
of `awk' programs, see *Note How to Contribute: How To Contribute, for
more information.

   The programs in this major node and in *Note Practical `awk'
Programs: Sample Programs, freely use features that are `gawk'-specific.
Rewriting these programs for different implementations of awk is pretty
straightforward.

   Diagnostic error messages are sent to `/dev/stderr'.  Use `| "cat
1>&2"' instead of `> "/dev/stderr"' if your system does not have a
`/dev/stderr', or if you cannot use `gawk'.

   A number of programs use `nextfile' (*note Using `gawk''s `nextfile'
Statement: Nextfile Statement.)  to skip any remaining input in the
input file.  *Note Implementing `nextfile' as a Function: Nextfile
Function, shows you how to write a function that does the same thing.

   Finally, some of the programs choose to ignore upper- and lowercase
distinctions in their input. They do so by assigning one to
`IGNORECASE'.  You can achieve almost the same effect(1) by adding the
following rule to the beginning of the program:

     # ignore case
     { $0 = tolower($0) }

Also, verify that all regexp and string constants used in comparisons
use only lowercase letters.

* Menu:

* Library Names::               How to best name private global variables in
                                library functions.
* General Functions::           Functions that are of general use.
* Data File Management::        Functions for managing command-line data
                                files.
* Getopt Function::             A function for processing command-line
                                arguments.
* Passwd Functions::            Functions for getting user information.
* Group Functions::             Functions for getting group information.

   ---------- Footnotes ----------

   (1) The effects are not identical.  Output of the transformed record
will be in all lowercase, while `IGNORECASE' preserves the original
contents of the input record.


File: gawk.info,  Node: Library Names,  Next: General Functions,  Prev: Library Functions,  Up: Library Functions

Naming Library Function Global Variables
========================================

   Due to the way the `awk' language evolved, variables are either
"global" (usable by the entire program) or "local" (usable just by a
specific function).  There is no intermediate state analogous to
`static' variables in C.

   Library functions often need to have global variables that they can
use to preserve state information between calls to the function--for
example, `getopt''s variable `_opti' (*note Processing Command-Line
Options: Getopt Function.).  Such variables are called "private", since
the only functions that need to use them are the ones in the library.

   When writing a library function, you should try to choose names for
your private variables that will not conflict with any variables used by
either another library function or a user's main program.  For example,
a name like `i' or `j' is not a good choice, because user programs
often use variable names like these for their own purposes.

   The example programs shown in this major node all start the names of
their private variables with an underscore (`_').  Users generally
don't use leading underscores in their variable names, so this
convention immediately decreases the chances that the variable name
will be accidentally shared with the user's program.

   In addition, several of the library functions use a prefix that helps
indicate what function or set of functions use the variables--for
example, `_pw_byname' in the user database routines (*note Reading the
User Database: Passwd Functions.).  This convention is recommended,
since it even further decreases the chance of inadvertent conflict
among variable names.  Note that this convention is used equally well
for variable names and for private function names as well.(1)

   As a final note on variable naming, if a function makes global
variables available for use by a main program, it is a good convention
to start that variable's name with a capital letter--for example,
`getopt''s `Opterr' and `Optind' variables (*note Processing
Command-Line Options: Getopt Function.).  The leading capital letter
indicates that it is global, while the fact that the variable name is
not all capital letters indicates that the variable is not one of
`awk''s built-in variables, such as `FS'.

   It is also important that _all_ variables in library functions that
do not need to save state are, in fact, declared local.(2) If this is
not done, the variable could accidentally be used in the user's
program, leading to bugs that are very difficult to track down:

     function lib_func(x, y,    l1, l2)
     {
         ...
         USE VARIABLE some_var   # some_var should be local
         ...                   # but is not by oversight
     }

   A different convention, common in the Tcl community, is to use a
single associative array to hold the values needed by the library
function(s), or "package."  This significantly decreases the number of
actual global names in use.  For example, the functions described in
*Note Reading the User Database: Passwd Functions, might have used
array elements `PW_data["inited"]', `PW_data["total"]',
`PW_data["count"]', and `PW_data["awklib"]', instead of `_pw_inited',
`_pw_awklib', `_pw_total', and `_pw_count'.

   The conventions presented in this minor node are exactly that:
conventions. You are not required to write your programs this way--we
merely recommend that you do so.

   ---------- Footnotes ----------

   (1) While all the library routines could have been rewritten to use
this convention, this was not done, in order to show how my own `awk'
programming style has evolved and to provide some basis for this
discussion.

   (2) `gawk''s `--dump-variables' command-line option is useful for
verifying this.


File: gawk.info,  Node: General Functions,  Next: Data File Management,  Prev: Library Names,  Up: Library Functions

General Programming
===================

   This minor node presents a number of functions that are of general
programming use.

* Menu:

* Nextfile Function::           Two implementations of a `nextfile'
                                function.
* Assert Function::             A function for assertions in `awk'
                                programs.
* Round Function::              A function for rounding if `sprintf' does
                                not do it correctly.
* Cliff Random Function::       The Cliff Random Number Generator.
* Ordinal Functions::           Functions for using characters as numbers and
                                vice versa.
* Join Function::               A function to join an array into a string.
* Gettimeofday Function::       A function to get formatted times.


File: gawk.info,  Node: Nextfile Function,  Next: Assert Function,  Prev: General Functions,  Up: General Functions

Implementing `nextfile' as a Function
-------------------------------------

   The `nextfile' statement, presented in *Note Using `gawk''s
`nextfile' Statement: Nextfile Statement, is a `gawk'-specific
extension--it is not available in most other implementations of `awk'.
This minor node shows two versions of a `nextfile' function that you
can use to simulate `gawk''s `nextfile' statement if you cannot use
`gawk'.

   A first attempt at writing a `nextfile' function is as follows:

     # nextfile --- skip remaining records in current file
     # this should be read in before the "main" awk program
     
     function nextfile()    { _abandon_ = FILENAME; next }
     _abandon_ == FILENAME  { next }

   Because it supplies a rule that must be executed first, this file
should be included before the main program. This rule compares the
current data file's name (which is always in the `FILENAME' variable) to
a private variable named `_abandon_'.  If the file name matches, then
the action part of the rule executes a `next' statement to go on to the
next record.  (The use of `_' in the variable name is a convention.  It
is discussed more fully in *Note Naming Library Function Global
Variables: Library Names.)

   The use of the `next' statement effectively creates a loop that reads
all the records from the current data file.  The end of the file is
eventually reached and a new data file is opened, changing the value of
`FILENAME'.  Once this happens, the comparison of `_abandon_' to
`FILENAME' fails, and execution continues with the first rule of the
"real" program.

   The `nextfile' function itself simply sets the value of `_abandon_'
and then executes a `next' statement to start the loop.

   This initial version has a subtle problem.  If the same data file is
listed _twice_ on the commandline, one right after the other or even
with just a variable assignment between them, this code skips right
through the file a second time, even though it should stop when it gets
to the end of the first occurrence.  A second version of `nextfile'
that remedies this problem is shown here:

     # nextfile --- skip remaining records in current file
     # correctly handle successive occurrences of the same file
     # this should be read in before the "main" awk program
     
     function nextfile()   { _abandon_ = FILENAME; next }
     
     _abandon_ == FILENAME {
           if (FNR == 1)
               _abandon_ = ""
           else
               next
     }

   The `nextfile' function has not changed.  It makes `_abandon_' equal
to the current file name and then executes a `next' statement.  The
`next' statement reads the next record and increments `FNR' so that
`FNR' is guaranteed to have a value of at least two.  However, if
`nextfile' is called for the last record in the file, then `awk' closes
the current data file and moves on to the next one.  Upon doing so,
`FILENAME' is set to the name of the new file and `FNR' is reset to
one.  If this next file is the same as the previous one, `_abandon_' is
still equal to `FILENAME'.  However, `FNR' is equal to one, telling us
that this is a new occurrence of the file and not the one we were
reading when the `nextfile' function was executed.  In that case,
`_abandon_' is reset to the empty string, so that further executions of
this rule fail (until the next time that `nextfile' is called).

   If `FNR' is not one, then we are still in the original data file and
the program executes a `next' statement to skip through it.

   An important question to ask at this point is: given that the
functionality of `nextfile' can be provided with a library file, why is
it built into `gawk'?  Adding features for little reason leads to
larger, slower programs that are harder to maintain.  The answer is
that building `nextfile' into `gawk' provides significant gains in
efficiency.  If the `nextfile' function is executed at the beginning of
a large data file, `awk' still has to scan the entire file, splitting
it up into records, just to skip over it.  The built-in `nextfile' can
simply close the file immediately and proceed to the next one, which
saves a lot of time.  This is particularly important in `awk', because
`awk' programs are generally I/O-bound (i.e., they spend most of their
time doing input and output, instead of performing computations).


File: gawk.info,  Node: Assert Function,  Next: Round Function,  Prev: Nextfile Function,  Up: General Functions

Assertions
----------

   When writing large programs, it is often useful to know that a
condition or set of conditions is true.  Before proceeding with a
particular computation, you make a statement about what you believe to
be the case.  Such a statement is known as an "assertion".  The C
language provides an `<assert.h>' header file and corresponding
`assert' macro that the programmer can use to make assertions.  If an
assertion fails, the `assert' macro arranges to print a diagnostic
message describing the condition that should have been true but was
not, and then it kills the program.  In C, using `assert' looks this:

     #include <assert.h>
     
     int myfunc(int a, double b)
     {
          assert(a <= 5 && b >= 17.1);
          ...
     }

   If the assertion fails, the program prints a message similar to this:

     prog.c:5: assertion failed: a <= 5 && b >= 17.1

   The C language makes it possible to turn the condition into a string
for use in printing the diagnostic message.  This is not possible in
`awk', so this `assert' function also requires a string version of the
condition that is being tested.  Following is the function:

     # assert --- assert that a condition is true. Otherwise exit.
     function assert(condition, string)
     {
         if (! condition) {
             printf("%s:%d: assertion failed: %s\n",
                 FILENAME, FNR, string) > "/dev/stderr"
             _assert_exit = 1
             exit 1
         }
     }
     
     END {
         if (_assert_exit)
             exit 1
     }

   The `assert' function tests the `condition' parameter. If it is
false, it prints a message to standard error, using the `string'
parameter to describe the failed condition.  It then sets the variable
`_assert_exit' to one and executes the `exit' statement.  The `exit'
statement jumps to the `END' rule. If the `END' rules finds
`_assert_exit' to be true, it exits immediately.

   The purpose of the test in the `END' rule is to keep any other `END'
rules from running.  When an assertion fails, the program should exit
immediately.  If no assertions fail, then `_assert_exit' is still false
when the `END' rule is run normally, and the rest of the program's
`END' rules execute.  For all of this to work correctly, `assert.awk'
must be the first source file read by `awk'.  The function can be used
in a program in the following way:

     function myfunc(a, b)
     {
          assert(a <= 5 && b >= 17.1, "a <= 5 && b >= 17.1")
          ...
     }

If the assertion fails, you see a message similar to the following:

     mydata:1357: assertion failed: a <= 5 && b >= 17.1

   There is a small problem with this version of `assert'.  An `END'
rule is automatically added to the program calling `assert'.  Normally,
if a program consists of just a `BEGIN' rule, the input files and/or
standard input are not read. However, now that the program has an `END'
rule, `awk' attempts to read the input data files or standard input
(*note Startup and Cleanup Actions: Using BEGIN/END.), most likely
causing the program to hang as it waits for input.

   There is a simple workaround to this: make sure the `BEGIN' rule
always ends with an `exit' statement.


File: gawk.info,  Node: Round Function,  Next: Cliff Random Function,  Prev: Assert Function,  Up: General Functions

Rounding Numbers
----------------

   The way `printf' and `sprintf' (*note Using `printf' Statements for
Fancier Printing: Printf.)  perform rounding often depends upon the
system's C `sprintf' subroutine.  On many machines, `sprintf' rounding
is "unbiased," which means it doesn't always round a trailing `.5' up,
contrary to naive expectations.  In unbiased rounding, `.5' rounds to
even, rather than always up, so 1.5 rounds to 2 but 4.5 rounds to 4.
This means that if you are using a format that does rounding (e.g.,
`"%.0f"'), you should check what your system does.  The following
function does traditional rounding; it might be useful if your awk's
`printf' does unbiased rounding:

     # round.awk --- do normal rounding
     function round(x,   ival, aval, fraction)
     {
        ival = int(x)    # integer part, int() truncates
     
        # see if fractional part
        if (ival == x)   # no fraction
           return x
     
        if (x < 0) {
           aval = -x     # absolute value
           ival = int(aval)
           fraction = aval - ival
           if (fraction >= .5)
              return int(x) - 1   # -2.5 --> -3
           else
              return int(x)       # -2.3 --> -2
        } else {
           fraction = x - ival
           if (fraction >= .5)
              return ival + 1
           else
              return ival
        }
     }
     
     # test harness
     { print $0, round($0) }


File: gawk.info,  Node: Cliff Random Function,  Next: Ordinal Functions,  Prev: Round Function,  Up: General Functions

The Cliff Random Number Generator
---------------------------------

   The Cliff random number generator(1) is a very simple random number
generator that "passes the noise sphere test for randomness by showing
no structure."  It is easily programmed, in less than 10 lines of `awk'
code:

     # cliff_rand.awk --- generate Cliff random numbers
     BEGIN { _cliff_seed = 0.1 }
     
     function cliff_rand()
     {
         _cliff_seed = (100 * log(_cliff_seed)) % 1
         if (_cliff_seed < 0)
             _cliff_seed = - _cliff_seed
         return _cliff_seed
     }

   This algorithm requires an initial "seed" of 0.1.  Each new value
uses the current seed as input for the calculation.  If the built-in
`rand' function (*note Numeric Functions::) isn't random enough, you
might try using this function instead.

   ---------- Footnotes ----------

   (1) `http://mathworld.wolfram.com/CliffRandomNumberGenerator.hmtl'


File: gawk.info,  Node: Ordinal Functions,  Next: Join Function,  Prev: Cliff Random Function,  Up: General Functions

Translating Between Characters and Numbers
------------------------------------------

   One commercial implementation of `awk' supplies a built-in function,
`ord', which takes a character and returns the numeric value for that
character in the machine's character set.  If the string passed to
`ord' has more than one character, only the first one is used.

   The inverse of this function is `chr' (from the function of the same
name in Pascal), which takes a number and returns the corresponding
character.  Both functions are written very nicely in `awk'; there is
no real reason to build them into the `awk' interpreter:

     # ord.awk --- do ord and chr
     
     # Global identifiers:
     #    _ord_:        numerical values indexed by characters
     #    _ord_init:    function to initialize _ord_
     BEGIN    { _ord_init() }
     
     function _ord_init(    low, high, i, t)
     {
         low = sprintf("%c", 7) # BEL is ascii 7
         if (low == "\a") {    # regular ascii
             low = 0
             high = 127
         } else if (sprintf("%c", 128 + 7) == "\a") {
             # ascii, mark parity
             low = 128
             high = 255
         } else {        # ebcdic(!)
             low = 0
             high = 255
         }
     
         for (i = low; i <= high; i++) {
             t = sprintf("%c", i)
             _ord_[t] = i
         }
     }

   Some explanation of the numbers used by `chr' is worthwhile.  The
most prominent character set in use today is ASCII. Although an 8-bit
byte can hold 256 distinct values (from 0 to 255), ASCII only defines
characters that use the values from 0 to 127.(1) In the now distant
past, at least one minicomputer manufacturer used ASCII, but with mark
parity, meaning that the leftmost bit in the byte is always 1.  This
means that on those systems, characters have numeric values from 128 to
255.  Finally, large mainframe systems use the EBCDIC character set,
which uses all 256 values.  While there are other character sets in use
on some older systems, they are not really worth worrying about:

     function ord(str,    c)
     {
         # only first character is of interest
         c = substr(str, 1, 1)
         return _ord_[c]
     }
     
     function chr(c)
     {
         # force c to be numeric by adding 0
         return sprintf("%c", c + 0)
     }
     
     #### test code ####
     # BEGIN    \
     # {
     #    for (;;) {
     #        printf("enter a character: ")
     #        if (getline var <= 0)
     #            break
     #        printf("ord(%s) = %d\n", var, ord(var))
     #    }
     # }

   An obvious improvement to these functions is to move the code for the
`_ord_init' function into the body of the `BEGIN' rule.  It was written
this way initially for ease of development.  There is a "test program"
in a `BEGIN' rule, to test the function.  It is commented out for
production use.

   ---------- Footnotes ----------

   (1) ASCII has been extended in many countries to use the values from
128 to 255 for country-specific characters.  If your  system uses these
extensions, you can simplify `_ord_init' to simply loop from 0 to 255.


File: gawk.info,  Node: Join Function,  Next: Gettimeofday Function,  Prev: Ordinal Functions,  Up: General Functions

Merging an Array into a String
------------------------------

   When doing string processing, it is often useful to be able to join
all the strings in an array into one long string.  The following
function, `join', accomplishes this task.  It is used later in several
of the application programs (*note Practical `awk' Programs: Sample
Programs.).

   Good function design is important; this function needs to be general
but it should also have a reasonable default behavior.  It is called
with an array as well as the beginning and ending indices of the
elements in the array to be merged.  This assumes that the array
indices are numeric--a reasonable assumption since the array was likely
created with `split' (*note String Manipulation Functions: String
Functions.):

     # join.awk --- join an array into a string
     function join(array, start, end, sep,    result, i)
     {
         if (sep == "")
            sep = " "
         else if (sep == SUBSEP) # magic value
            sep = ""
         result = array[start]
         for (i = start + 1; i <= end; i++)
             result = result sep array[i]
         return result
     }

   An optional additional argument is the separator to use when joining
the strings back together.  If the caller supplies a nonempty value,
`join' uses it; if it is not supplied, it has a null value.  In this
case, `join' uses a single blank as a default separator for the
strings.  If the value is equal to `SUBSEP', then `join' joins the
strings with no separator between them.  `SUBSEP' serves as a "magic"
value to indicate that there should be no separation between the
component strings.(1)

   ---------- Footnotes ----------

   (1) It would be nice if `awk' had an assignment operator for
concatenation.  The lack of an explicit operator for concatenation
makes string operations more difficult than they really need to be.


File: gawk.info,  Node: Gettimeofday Function,  Prev: Join Function,  Up: General Functions

Managing the Time of Day
------------------------

   The `systime' and `strftime' functions described in *Note Using
`gawk''s Timestamp Functions: Time Functions, provide the minimum
functionality necessary for dealing with the time of day in human
readable form.  While `strftime' is extensive, the control formats are
not necessarily easy to remember or intuitively obvious when reading a
program.

   The following function, `gettimeofday', populates a user-supplied
array with preformatted time information.  It returns a string with the
current time formatted in the same way as the `date' utility:

     # gettimeofday.awk --- get the time of day in a usable format
     
     # Returns a string in the format of output of date(1)
     # Populates the array argument time with individual values:
     #    time["second"]       -- seconds (0 - 59)
     #    time["minute"]       -- minutes (0 - 59)
     #    time["hour"]         -- hours (0 - 23)
     #    time["althour"]      -- hours (0 - 12)
     #    time["monthday"]     -- day of month (1 - 31)
     #    time["month"]        -- month of year (1 - 12)
     #    time["monthname"]    -- name of the month
     #    time["shortmonth"]   -- short name of the month
     #    time["year"]         -- year modulo 100 (0 - 99)
     #    time["fullyear"]     -- full year
     #    time["weekday"]      -- day of week (Sunday = 0)
     #    time["altweekday"]   -- day of week (Monday = 0)
     #    time["dayname"]      -- name of weekday
     #    time["shortdayname"] -- short name of weekday
     #    time["yearday"]      -- day of year (0 - 365)
     #    time["timezone"]     -- abbreviation of timezone name
     #    time["ampm"]         -- AM or PM designation
     #    time["weeknum"]      -- week number, Sunday first day
     #    time["altweeknum"]   -- week number, Monday first day
     
     function gettimeofday(time,    ret, now, i)
     {
         # get time once, avoids unnecessary system calls
         now = systime()
     
         # return date(1)-style output
         ret = strftime("%a %b %d %H:%M:%S %Z %Y", now)
     
         # clear out target array
         delete time
     
         # fill in values, force numeric values to be
         # numeric by adding 0
         time["second"]       = strftime("%S", now) + 0
         time["minute"]       = strftime("%M", now) + 0
         time["hour"]         = strftime("%H", now) + 0
         time["althour"]      = strftime("%I", now) + 0
         time["monthday"]     = strftime("%d", now) + 0
         time["month"]        = strftime("%m", now) + 0
         time["monthname"]    = strftime("%B", now)
         time["shortmonth"]   = strftime("%b", now)
         time["year"]         = strftime("%y", now) + 0
         time["fullyear"]     = strftime("%Y", now) + 0
         time["weekday"]      = strftime("%w", now) + 0
         time["altweekday"]   = strftime("%u", now) + 0
         time["dayname"]      = strftime("%A", now)
         time["shortdayname"] = strftime("%a", now)
         time["yearday"]      = strftime("%j", now) + 0
         time["timezone"]     = strftime("%Z", now)
         time["ampm"]         = strftime("%p", now)
         time["weeknum"]      = strftime("%U", now) + 0
         time["altweeknum"]   = strftime("%W", now) + 0
     
         return ret
     }

   The string indices are easier to use and read than the various
formats required by `strftime'.  The `alarm' program presented in *Note
An Alarm Clock Program: Alarm Program, uses this function.  A more
general design for the `gettimeofday' function would have allowed the
user to supply an optional timestamp value to use instead of the
current time.


File: gawk.info,  Node: Data File Management,  Next: Getopt Function,  Prev: General Functions,  Up: Library Functions

Data File Management
====================

   This minor node presents functions that are useful for managing
command-line data files.

* Menu:

* Filetrans Function::          A function for handling data file transitions.
* Rewind Function::             A function for rereading the current file.
* File Checking::               Checking that data files are readable.
* Ignoring Assigns::            Treating assignments as file names.


File: gawk.info,  Node: Filetrans Function,  Next: Rewind Function,  Prev: Data File Management,  Up: Data File Management

Noting Data File Boundaries
---------------------------

   The `BEGIN' and `END' rules are each executed exactly once at the
beginning and end of your `awk' program, respectively (*note The
`BEGIN' and `END' Special Patterns: BEGIN/END.).  We (the `gawk'
authors) once had a user who mistakenly thought that the `BEGIN' rule
is executed at the beginning of each data file and the `END' rule is
executed at the end of each data file.  When informed that this was not
the case, the user requested that we add new special patterns to
`gawk', named `BEGIN_FILE' and `END_FILE', that would have the desired
behavior.  He even supplied us the code to do so.

   Adding these special patterns to `gawk' wasn't necessary; the job
can be done cleanly in `awk' itself, as illustrated by the following
library program.  It arranges to call two user-supplied functions,
`beginfile' and `endfile', at the beginning and end of each data file.
Besides solving the problem in only nine(!) lines of code, it does so
_portably_; this works with any implementation of `awk':

     # transfile.awk
     #
     # Give the user a hook for filename transitions
     #
     # The user must supply functions beginfile() and endfile()
     # that each take the name of the file being started or
     # finished, respectively.
     
     FILENAME != _oldfilename \
     {
         if (_oldfilename != "")
             endfile(_oldfilename)
         _oldfilename = FILENAME
         beginfile(FILENAME)
     }
     
     END   { endfile(FILENAME) }

   This file must be loaded before the user's "main" program, so that
the rule it supplies is executed first.

   This rule relies on `awk''s `FILENAME' variable that automatically
changes for each new data file.  The current file name is saved in a
private variable, `_oldfilename'.  If `FILENAME' does not equal
`_oldfilename', then a new data file is being processed and it is
necessary to call `endfile' for the old file.  Because `endfile' should
only be called if a file has been processed, the program first checks
to make sure that `_oldfilename' is not the null string.  The program
then assigns the current file name to `_oldfilename' and calls
`beginfile' for the file.  Because, like all `awk' variables,
`_oldfilename' is initialized to the null string, this rule executes
correctly even for the first data file.

   The program also supplies an `END' rule to do the final processing
for the last file.  Because this `END' rule comes before any `END' rules
supplied in the "main" program, `endfile' is called first.  Once again
the value of multiple `BEGIN' and `END' rules should be clear.

   This version has same problem as the first version of `nextfile'
(*note Implementing `nextfile' as a Function: Nextfile Function.).  If
the same data file occurs twice in a row on the command line, then
`endfile' and `beginfile' are not executed at the end of the first pass
and at the beginning of the second pass.  The following version solves
the problem:

     # ftrans.awk --- handle data file transitions
     #
     # user supplies beginfile() and endfile() functions
     FNR == 1 {
         if (_filename_ != "")
             endfile(_filename_)
         _filename_ = FILENAME
         beginfile(FILENAME)
     }
     
     END  { endfile(_filename_) }

   *Note Counting Things: Wc Program, shows how this library function
can be used and how it simplifies writing the main program.


File: gawk.info,  Node: Rewind Function,  Next: File Checking,  Prev: Filetrans Function,  Up: Data File Management

Rereading the Current File
--------------------------

   Another request for a new built-in function was for a `rewind'
function that would make it possible to reread the current file.  The
requesting user didn't want to have to use `getline' (*note Explicit
Input with `getline': Getline.)  inside a loop.

   However, as long as you are not in the `END' rule, it is quite easy
to arrange to immediately close the current input file and then start
over with it from the top.  For lack of a better name, we'll call it
`rewind':

     # rewind.awk --- rewind the current file and start over
     function rewind(    i)
     {
         # shift remaining arguments up
         for (i = ARGC; i > ARGIND; i--)
             ARGV[i] = ARGV[i-1]
     
         # make sure gawk knows to keep going
         ARGC++
     
         # make current file next to get done
         ARGV[ARGIND+1] = FILENAME
     
         # do it
         nextfile
     }

   This code relies on the `ARGIND' variable (*note Built-in Variables
That Convey Information: Auto-set.), which is specific to `gawk'.  If
you are not using `gawk', you can use ideas presented in *Note Noting
Data File Boundaries: Filetrans Function, to either update `ARGIND' on
your own or modify this code as appropriate.

   The `rewind' function also relies on the `nextfile' keyword (*note
Using `gawk''s `nextfile' Statement: Nextfile Statement.).  *Note
Implementing `nextfile' as a Function: Nextfile Function, for a
function version of `nextfile'.


File: gawk.info,  Node: File Checking,  Next: Ignoring Assigns,  Prev: Rewind Function,  Up: Data File Management

Checking for Readable Data Files
--------------------------------

   Normally, if you give `awk' a data file that isn't readable, it
stops with a fatal error.  There are times when you might want to just
ignore such files and keep going.  You can do this by prepending the
following program to your `awk' program:

     # readable.awk --- library file to skip over unreadable files
     BEGIN {
         for (i = 1; i < ARGC; i++) {
             if (ARGV[i] ~ /^[A-Za-z_][A-Za-z0-9_]*=.*/ \
                 || ARGV[i] == "-")
                 continue    # assignment or standard input
             else if ((getline junk < ARGV[i]) < 0) # unreadable
                 delete ARGV[i]
             else
                 close(ARGV[i])
         }
     }

   In `gawk', the `getline' won't be fatal (unless `--posix' is in
force).  Removing the element from `ARGV' with `delete' skips the file
(since it's no longer in the list).


File: gawk.info,  Node: Ignoring Assigns,  Prev: File Checking,  Up: Data File Management

Treating Assignments as File Names
----------------------------------

   Occasionally, you might not want `awk' to process command-line
variable assignments (*note Assigning Variables on the Command Line:
Assignment Options.).  In particular, if you have file names that
contain an `=' character, `awk' treats the file name as an assignment,
and does not process it.

   Some users have suggested an additional command-line option for
`gawk' to disable command-line assignments.  However, some simple
programming with a library file does the trick:

     # noassign.awk --- library file to avoid the need for a
     # special option that disables command-line assignments
     function disable_assigns(argc, argv,    i)
     {
         for (i = 1; i < argc; i++)
             if (argv[i] ~ /^[A-Za-z_][A-Za-z_0-9]*=.*/)
                 argv[i] = ("./" argv[i])
     }
     
     BEGIN {
         if (No_command_assign)
             disable_assigns(ARGC, ARGV)
     }

   You then run your program this way:

     awk -v No_command_assign=1 -f noassign.awk -f yourprog.awk *

   The function works by looping through the arguments.  It prepends
`./' to any argument that matches the form of a variable assignment,
turning that argument into a file name.

   The use of `No_command_assign' allows you to disable command-line
assignments at invocation time, by giving the variable a true value.
When not set, it is initially zero (i.e., false), so the command-line
arguments are left alone.


File: gawk.info,  Node: Getopt Function,  Next: Passwd Functions,  Prev: Data File Management,  Up: Library Functions

Processing Command-Line Options
===============================

   Most utilities on POSIX compatible systems take options, or
"switches," on the command line that can be used to change the way a
program behaves.  `awk' is an example of such a program (*note
Command-Line Options: Options.).  Often, options take "arguments";
i.e., data that the program needs to correctly obey the command-line
option.  For example, `awk''s `-F' option requires a string to use as
the field separator.  The first occurrence on the command line of
either `--' or a string that does not begin with `-' ends the options.

   Modern Unix systems provide a C function named `getopt' for
processing command-line arguments.  The programmer provides a string
describing the one-letter options. If an option requires an argument,
it is followed in the string with a colon.  `getopt' is also passed the
count and values of the command-line arguments and is called in a loop.
`getopt' processes the command-line arguments for option letters.  Each
time around the loop, it returns a single character representing the
next option letter that it finds, or `?' if it finds an invalid option.
When it returns -1, there are no options left on the command line.

   When using `getopt', options that do not take arguments can be
grouped together.  Furthermore, options that take arguments require
that the argument is present.  The argument can immediately follow the
option letter, or it can be a separate command-line argument.

   Given a hypothetical program that takes three command-line options,
`-a', `-b', and `-c', where `-b' requires an argument, all of the
following are valid ways of invoking the program:

     prog -a -b foo -c data1 data2 data3
     prog -ac -bfoo -- data1 data2 data3
     prog -acbfoo data1 data2 data3

   Notice that when the argument is grouped with its option, the rest of
the argument is considered to be the option's argument.  In this
example, `-acbfoo' indicates that all of the `-a', `-b', and `-c'
options were supplied, and that `foo' is the argument to the `-b'
option.

   `getopt' provides four external variables that the programmer can
use:

`optind'
     The index in the argument value array (`argv') where the first
     nonoption command-line argument can be found.

`optarg'
     The string value of the argument to an option.

`opterr'
     Usually `getopt' prints an error message when it finds an invalid
     option.  Setting `opterr' to zero disables this feature.  (An
     application might want to print its own error message.)

`optopt'
     The letter representing the command-line option.

   The following C fragment shows how `getopt' might process
command-line arguments for `awk':

     int
     main(int argc, char *argv[])
     {
         ...
         /* print our own message */
         opterr = 0;
         while ((c = getopt(argc, argv, "v:f:F:W:")) != -1) {
             switch (c) {
             case 'f':    /* file */
                 ...
                 break;
             case 'F':    /* field separator */
                 ...
                 break;
             case 'v':    /* variable assignment */
                 ...
                 break;
             case 'W':    /* extension */
                 ...
                 break;
             case '?':
             default:
                 usage();
                 break;
             }
         }
         ...
     }

   As a side point, `gawk' actually uses the GNU `getopt_long' function
to process both normal and GNU-style long options (*note Command-Line
Options: Options.).

   The abstraction provided by `getopt' is very useful and is quite
handy in `awk' programs as well.  Following is an `awk' version of
`getopt'.  This function highlights one of the greatest weaknesses in
`awk', which is that it is very poor at manipulating single characters.
Repeated calls to `substr' are necessary for accessing individual
characters (*note String Manipulation Functions: String Functions.).(1)

   The discussion that follows walks through the code a bit at a time:

     # getopt.awk --- do C library getopt(3) function in awk
     # External variables:
     #    Optind -- index in ARGV of first nonoption argument
     #    Optarg -- string value of argument to current option
     #    Opterr -- if nonzero, print our own diagnostic
     #    Optopt -- current option letter
     
     # Returns:
     #    -1     at end of options
     #    ?      for unrecognized option
     #    <c>    a character representing the current option
     
     # Private Data:
     #    _opti  -- index in multi-flag option, e.g., -abc

   The function starts out with a list of the global variables it uses,
what the return values are, what they mean, and any global variables
that are "private" to this library function.  Such documentation is
essential for any program, and particularly for library functions.

   The `getopt' function first checks that it was indeed called with a
string of options (the `options' parameter).  If `options' has a zero
length, `getopt' immediately returns -1:

     function getopt(argc, argv, options,    thisopt, i)
     {
         if (length(options) == 0)    # no options given
             return -1
     
         if (argv[Optind] == "--") {  # all done
             Optind++
             _opti = 0
             return -1
         } else if (argv[Optind] !~ /^-[^: \t\n\f\r\v\b]/) {
             _opti = 0
             return -1
         }

   The next thing to check for is the end of the options.  A `--' ends
the command-line options, as does any command-line argument that does
not begin with a `-'.  `Optind' is used to step through the array of
command-line arguments; it retains its value across calls to `getopt',
because it is a global variable.

   The regular expression that is used, `/^-[^: \t\n\f\r\v\b]/', is
perhaps a bit of overkill; it checks for a `-' followed by anything
that is not whitespace and not a colon.  If the current command-line
argument does not match this pattern, it is not an option, and it ends
option processing:

         if (_opti == 0)
             _opti = 2
         thisopt = substr(argv[Optind], _opti, 1)
         Optopt = thisopt
         i = index(options, thisopt)
         if (i == 0) {
             if (Opterr)
                 printf("%c -- invalid option\n",
                                       thisopt) > "/dev/stderr"
             if (_opti >= length(argv[Optind])) {
                 Optind++
                 _opti = 0
             } else
                 _opti++
             return "?"
         }

   The `_opti' variable tracks the position in the current command-line
argument (`argv[Optind]').  If multiple options are grouped together
with one `-' (e.g., `-abx'), it is necessary to return them to the user
one at a time.

   If `_opti' is equal to zero, it is set to two, which is the index in
the string of the next character to look at (we skip the `-', which is
at position one).  The variable `thisopt' holds the character, obtained
with `substr'.  It is saved in `Optopt' for the main program to use.

   If `thisopt' is not in the `options' string, then it is an invalid
option.  If `Opterr' is nonzero, `getopt' prints an error message on
the standard error that is similar to the message from the C version of
`getopt'.

   Because the option is invalid, it is necessary to skip it and move
on to the next option character.  If `_opti' is greater than or equal
to the length of the current command-line argument, it is necessary to
move on to the next argument, so `Optind' is incremented and `_opti' is
reset to zero. Otherwise, `Optind' is left alone and `_opti' is merely
incremented.

   In any case, because the option is invalid, `getopt' returns `?'.
The main program can examine `Optopt' if it needs to know what the
invalid option letter actually is. Continuing on:

         if (substr(options, i + 1, 1) == ":") {
             # get option argument
             if (length(substr(argv[Optind], _opti + 1)) > 0)
                 Optarg = substr(argv[Optind], _opti + 1)
             else
                 Optarg = argv[++Optind]
             _opti = 0
         } else
             Optarg = ""

   If the option requires an argument, the option letter is followed by
a colon in the `options' string.  If there are remaining characters in
the current command-line argument (`argv[Optind]'), then the rest of
that string is assigned to `Optarg'.  Otherwise, the next command-line
argument is used (`-xFOO' versus `-x FOO'). In either case, `_opti' is
reset to zero, because there are no more characters left to examine in
the current command-line argument. Continuing:

         if (_opti == 0 || _opti >= length(argv[Optind])) {
             Optind++
             _opti = 0
         } else
             _opti++
         return thisopt
     }

   Finally, if `_opti' is either zero or greater than the length of the
current command-line argument, it means this element in `argv' is
through being processed, so `Optind' is incremented to point to the
next element in `argv'.  If neither condition is true, then only
`_opti' is incremented, so that the next option letter can be processed
on the next call to `getopt'.

   The `BEGIN' rule initializes both `Opterr' and `Optind' to one.
`Opterr' is set to one, since the default behavior is for `getopt' to
print a diagnostic message upon seeing an invalid option.  `Optind' is
set to one, since there's no reason to look at the program name, which
is in `ARGV[0]':

     BEGIN {
         Opterr = 1    # default is to diagnose
         Optind = 1    # skip ARGV[0]
     
         # test program
         if (_getopt_test) {
             while ((_go_c = getopt(ARGC, ARGV, "ab:cd")) != -1)
                 printf("c = <%c>, optarg = <%s>\n",
                                            _go_c, Optarg)
             printf("non-option arguments:\n")
             for (; Optind < ARGC; Optind++)
                 printf("\tARGV[%d] = <%s>\n",
                                         Optind, ARGV[Optind])
         }
     }

   The rest of the `BEGIN' rule is a simple test program.  Here is the
result of two sample runs of the test program:

     $ awk -f getopt.awk -v _getopt_test=1 -- -a -cbARG bax -x
     -| c = <a>, optarg = <>
     -| c = <c>, optarg = <>
     -| c = <b>, optarg = <ARG>
     -| non-option arguments:
     -|         ARGV[3] = <bax>
     -|         ARGV[4] = <-x>
     
     $ awk -f getopt.awk -v _getopt_test=1 -- -a -x -- xyz abc
     -| c = <a>, optarg = <>
     error--> x -- invalid option
     -| c = <?>, optarg = <>
     -| non-option arguments:
     -|         ARGV[4] = <xyz>
     -|         ARGV[5] = <abc>

   In both runs, the first `--' terminates the arguments to `awk', so
that it does not try to interpret the `-a', etc., as its own options.
Several of the sample programs presented in *Note Practical `awk'
Programs: Sample Programs, use `getopt' to process their arguments.

   ---------- Footnotes ----------

   (1) This function was written before `gawk' acquired the ability to
split strings into single characters using `""' as the separator.  We
have left it alone, since using `substr' is more portable.


File: gawk.info,  Node: Passwd Functions,  Next: Group Functions,  Prev: Getopt Function,  Up: Library Functions

Reading the User Database
=========================

   The `PROCINFO' array (*note Built-in Variables::) provides access to
the current user's real and effective user and group ID numbers, and if
available, the user's supplementary group set.  However, because these
are numbers, they do not provide very useful information to the average
user.  There needs to be some way to find the user information
associated with the user and group ID numbers.  This minor node
presents a suite of functions for retrieving information from the user
database.  *Note Reading the Group Database: Group Functions, for a
similar suite that retrieves information from the group database.

   The POSIX standard does not define the file where user information is
kept.  Instead, it provides the `<pwd.h>' header file and several C
language subroutines for obtaining user information.  The primary
function is `getpwent', for "get password entry."  The "password" comes
from the original user database file, `/etc/passwd', which stores user
information, along with the encrypted passwords (hence the name).

   While an `awk' program could simply read `/etc/passwd' directly,
this file may not contain complete information about the system's set
of users.(1) To be sure you are able to produce a readable and complete
version of the user database, it is necessary to write a small C
program that calls `getpwent'.  `getpwent' is defined as returning a
pointer to a `struct passwd'.  Each time it is called, it returns the
next entry in the database.  When there are no more entries, it returns
`NULL', the null pointer.  When this happens, the C program should call
`endpwent' to close the database.  Following is `pwcat', a C program
that "cats" the password database:

     /*
      * pwcat.c
      *
      * Generate a printable version of the password database
      */
     #include <stdio.h>
     #include <pwd.h>
     
     int
     main(argc, argv)
     int argc;
     char **argv;
     {
         struct passwd *p;
     
         while ((p = getpwent()) != NULL)
             printf("%s:%s:%d:%d:%s:%s:%s\n",
                 p->pw_name, p->pw_passwd, p->pw_uid,
                 p->pw_gid, p->pw_gecos, p->pw_dir, p->pw_shell);
     
         endpwent();
         exit(0);
     }

   If you don't understand C, don't worry about it.  The output from
`pwcat' is the user database, in the traditional `/etc/passwd' format
of colon-separated fields.  The fields are:

Login name           The user's login name.
Encrypted password   The user's encrypted password.  This may not be
                     available on some systems.
User-ID              The user's numeric user ID number.
Group-ID             The user's numeric group ID number.
Full name            The user's full name, and perhaps other
                     information associated with the user.
Home directory       The user's login (or "home") directory
                     (familiar to shell programmers as `$HOME').
Login shell          The program that is run when the user logs in.
                     This is usually a shell, such as `bash'.

   A few lines representative of `pwcat''s output are as follows:

     $ pwcat
     -| root:3Ov02d5VaUPB6:0:1:Operator:/:/bin/sh
     -| nobody:*:65534:65534::/:
     -| daemon:*:1:1::/:
     -| sys:*:2:2::/:/bin/csh
     -| bin:*:3:3::/bin:
     -| arnold:xyzzy:2076:10:Arnold Robbins:/home/arnold:/bin/sh
     -| miriam:yxaay:112:10:Miriam Robbins:/home/miriam:/bin/sh
     -| andy:abcca2:113:10:Andy Jacobs:/home/andy:/bin/sh
     ...

   With that introduction, following is a group of functions for
getting user information.  There are several functions here,
corresponding to the C functions of the same names:

     # passwd.awk --- access password file information
     BEGIN {
         # tailor this to suit your system
         _pw_awklib = "/usr/local/libexec/awk/"
     }
     
     function _pw_init(    oldfs, oldrs, olddol0, pwcat, using_fw)
     {
         if (_pw_inited)
             return
     
         oldfs = FS
         oldrs = RS
         olddol0 = $0
         using_fw = (PROCINFO["FS"] == "FIELDWIDTHS")
         FS = ":"
         RS = "\n"
     
         pwcat = _pw_awklib "pwcat"
         while ((pwcat | getline) > 0) {
             _pw_byname[$1] = $0
             _pw_byuid[$3] = $0
             _pw_bycount[++_pw_total] = $0
         }
         close(pwcat)
         _pw_count = 0
         _pw_inited = 1
         FS = oldfs
         if (using_fw)
             FIELDWIDTHS = FIELDWIDTHS
         RS = oldrs
         $0 = olddol0
     }

   The `BEGIN' rule sets a private variable to the directory where
`pwcat' is stored.  Because it is used to help out an `awk' library
routine, we have chosen to put it in `/usr/local/libexec/awk'; however,
you might want it to be in a different directory on your system.

   The function `_pw_init' keeps three copies of the user information
in three associative arrays.  The arrays are indexed by username
(`_pw_byname'), by user ID number (`_pw_byuid'), and by order of
occurrence (`_pw_bycount').  The variable `_pw_inited' is used for
efficiency; `_pw_init' needs only to be called once.

   Because this function uses `getline' to read information from
`pwcat', it first saves the values of `FS', `RS', and `$0'.  It notes
in the variable `using_fw' whether field splitting with `FIELDWIDTHS'
is in effect or not.  Doing so is necessary, since these functions
could be called from anywhere within a user's program, and the user may
have his or her own way of splitting records and fields.

   The `using_fw' variable checks `PROCINFO["FS"]', which is
`"FIELDWIDTHS"' if field splitting is being done with `FIELDWIDTHS'.
This makes it possible to restore the correct field-splitting mechanism
later.  The test can only be true for `gawk'.  It is false if using
`FS' or on some other `awk' implementation.

   The main part of the function uses a loop to read database lines,
split the line into fields, and then store the line into each array as
necessary.  When the loop is done, `_pw_init' cleans up by closing the
pipeline, setting `_pw_inited' to one, and restoring `FS' (and
`FIELDWIDTHS' if necessary), `RS', and `$0'.  The use of `_pw_count' is
explained shortly.

   The `getpwnam' function takes a username as a string argument. If
that user is in the database, it returns the appropriate line.
Otherwise, it returns the null string:

     function getpwnam(name)
     {
         _pw_init()
         if (name in _pw_byname)
             return _pw_byname[name]
         return ""
     }

   Similarly, the `getpwuid' function takes a user ID number argument.
If that user number is in the database, it returns the appropriate
line. Otherwise, it returns the null string:

     function getpwuid(uid)
     {
         _pw_init()
         if (uid in _pw_byuid)
             return _pw_byuid[uid]
         return ""
     }

   The `getpwent' function simply steps through the database, one entry
at a time.  It uses `_pw_count' to track its current position in the
`_pw_bycount' array:

     function getpwent()
     {
         _pw_init()
         if (_pw_count < _pw_total)
             return _pw_bycount[++_pw_count]
         return ""
     }

   The `endpwent' function resets `_pw_count' to zero, so that
subsequent calls to `getpwent' start over again:

     function endpwent()
     {
         _pw_count = 0
     }

   A conscious design decision in this suite was made that each
subroutine calls `_pw_init' to initialize the database arrays.  The
overhead of running a separate process to generate the user database,
and the I/O to scan it, are only incurred if the user's main program
actually calls one of these functions.  If this library file is loaded
along with a user's program, but none of the routines are ever called,
then there is no extra runtime overhead.  (The alternative is move the
body of `_pw_init' into a `BEGIN' rule, which always runs `pwcat'.
This simplifies the code but runs an extra process that may never be
needed.)

   In turn, calling `_pw_init' is not too expensive, because the
`_pw_inited' variable keeps the program from reading the data more than
once.  If you are worried about squeezing every last cycle out of your
`awk' program, the check of `_pw_inited' could be moved out of
`_pw_init' and duplicated in all the other functions.  In practice,
this is not necessary, since most `awk' programs are I/O-bound, and it
clutters up the code.

   The `id' program in *Note Printing out User Information: Id Program,
uses these functions.

   ---------- Footnotes ----------

   (1) It is often the case that password information is stored in a
network database.


File: gawk.info,  Node: Group Functions,  Prev: Passwd Functions,  Up: Library Functions

Reading the Group Database
==========================

   Much of the discussion presented in *Note Reading the User Database:
Passwd Functions, applies to the group database as well.  Although
there has traditionally been a well-known file (`/etc/group') in a
well-known format, the POSIX standard only provides a set of C library
routines (`<grp.h>' and `getgrent') for accessing the information.
Even though this file may exist, it likely does not have complete
information.  Therefore, as with the user database, it is necessary to
have a small C program that generates the group database as its output.

   `grcat', a C program that "cats" the group database, is as follows:

     /*
      * grcat.c
      *
      * Generate a printable version of the group database
      */
     #include <stdio.h>
     #include <grp.h>
     
     int
     main(argc, argv)
     int argc;
     char **argv;
     {
         struct group *g;
         int i;
     
         while ((g = getgrent()) != NULL) {
             printf("%s:%s:%d:", g->gr_name, g->gr_passwd,
                                                 g->gr_gid);
             for (i = 0; g->gr_mem[i] != NULL; i++) {
                 printf("%s", g->gr_mem[i]);
                 if (g->gr_mem[i+1] != NULL)
                     putchar(',');
             }
             putchar('\n');
         }
         endgrent();
         exit(0);
     }

   Each line in the group database represents one group.  The fields are
separated with colons and represent the following information:

Group name           The group's name.
Group password       The group's encrypted password. In practice,
                     this field is never used; it is usually empty
                     or set to `*'.
Group-ID              The group's numeric group ID number; this
                     number should be unique within the file.
Group member list     A comma-separated list of usernames.  These
                     users are members of the group.  Modern Unix
                     systems allow users to be members of several
                     groups simultaneously.  If your system does,
                     then there are elements `"group1"' through
                     `"groupN"' in `PROCINFO' for those group ID
                     numbers.  (Note that `PROCINFO' is a `gawk'
                     extension; *note Built-in Variables::.)

   Here is what running `grcat' might produce:

     $ grcat
     -| wheel:*:0:arnold
     -| nogroup:*:65534:
     -| daemon:*:1:
     -| kmem:*:2:
     -| staff:*:10:arnold,miriam,andy
     -| other:*:20:
     ...

   Here are the functions for obtaining information from the group
database.  There are several, modeled after the C library functions of
the same names:

     # group.awk --- functions for dealing with the group file
     BEGIN    \
     {
         # Change to suit your system
         _gr_awklib = "/usr/local/libexec/awk/"
     }
     
     function _gr_init(    oldfs, oldrs, olddol0, grcat,
                                  using_fw, n, a, i)
     {
         if (_gr_inited)
             return
     
         oldfs = FS
         oldrs = RS
         olddol0 = $0
         using_fw = (PROCINFO["FS"] == "FIELDWIDTHS")
         FS = ":"
         RS = "\n"
     
         grcat = _gr_awklib "grcat"
         while ((grcat | getline) > 0) {
             if ($1 in _gr_byname)
                 _gr_byname[$1] = _gr_byname[$1] "," $4
             else
                 _gr_byname[$1] = $0
             if ($3 in _gr_bygid)
                 _gr_bygid[$3] = _gr_bygid[$3] "," $4
             else
                 _gr_bygid[$3] = $0
     
             n = split($4, a, "[ \t]*,[ \t]*")
             for (i = 1; i <= n; i++)
                 if (a[i] in _gr_groupsbyuser)
                     _gr_groupsbyuser[a[i]] = \
                         _gr_groupsbyuser[a[i]] " " $1
                 else
                     _gr_groupsbyuser[a[i]] = $1
     
             _gr_bycount[++_gr_count] = $0
         }
         close(grcat)
         _gr_count = 0
         _gr_inited++
         FS = oldfs
         if (using_fw)
             FIELDWIDTHS = FIELDWIDTHS
         RS = oldrs
         $0 = olddol0
     }

   The `BEGIN' rule sets a private variable to the directory where
`grcat' is stored.  Because it is used to help out an `awk' library
routine, we have chosen to put it in `/usr/local/libexec/awk'.  You
might want it to be in a different directory on your system.

   These routines follow the same general outline as the user database
routines (*note Reading the User Database: Passwd Functions.).  The
`_gr_inited' variable is used to ensure that the database is scanned no
more than once.  The `_gr_init' function first saves `FS',
`FIELDWIDTHS', `RS', and `$0', and then sets `FS' and `RS' to the
correct values for scanning the group information.

   The group information is stored is several associative arrays.  The
arrays are indexed by group name (`_gr_byname'), by group ID number
(`_gr_bygid'), and by position in the database (`_gr_bycount').  There
is an additional array indexed by username (`_gr_groupsbyuser'), which
is a space-separated list of groups to which each user belongs.

   Unlike the user database, it is possible to have multiple records in
the database for the same group.  This is common when a group has a
large number of members.  A pair of such entries might look like the
following:

     tvpeople:*:101:johnny,jay,arsenio
     tvpeople:*:101:david,conan,tom,joan

   For this reason, `_gr_init' looks to see if a group name or group ID
number is already seen.  If it is, then the usernames are simply
concatenated onto the previous list of users.  (There is actually a
subtle problem with the code just presented.  Suppose that the first
time there were no names. This code adds the names with a leading
comma. It also doesn't check that there is a `$4'.)

   Finally, `_gr_init' closes the pipeline to `grcat', restores `FS'
(and `FIELDWIDTHS' if necessary), `RS', and `$0', initializes
`_gr_count' to zero (it is used later), and makes `_gr_inited' nonzero.

   The `getgrnam' function takes a group name as its argument, and if
that group exists, it is returned. Otherwise, `getgrnam' returns the
null string:

     function getgrnam(group)
     {
         _gr_init()
         if (group in _gr_byname)
             return _gr_byname[group]
         return ""
     }

   The `getgrgid' function is similar, it takes a numeric group ID and
looks up the information associated with that group ID:

     function getgrgid(gid)
     {
         _gr_init()
         if (gid in _gr_bygid)
             return _gr_bygid[gid]
         return ""
     }

   The `getgruser' function does not have a C counterpart. It takes a
username and returns the list of groups that have the user as a member:

     function getgruser(user)
     {
         _gr_init()
         if (user in _gr_groupsbyuser)
             return _gr_groupsbyuser[user]
         return ""
     }

   The `getgrent' function steps through the database one entry at a
time.  It uses `_gr_count' to track its position in the list:

     function getgrent()
     {
         _gr_init()
         if (++_gr_count in _gr_bycount)
             return _gr_bycount[_gr_count]
         return ""
     }

   The `endgrent' function resets `_gr_count' to zero so that
`getgrent' can start over again:

     function endgrent()
     {
         _gr_count = 0
     }

   As with the user database routines, each function calls `_gr_init' to
initialize the arrays.  Doing so only incurs the extra overhead of
running `grcat' if these functions are used (as opposed to moving the
body of `_gr_init' into a `BEGIN' rule).

   Most of the work is in scanning the database and building the various
associative arrays.  The functions that the user calls are themselves
very simple, relying on `awk''s associative arrays to do work.

   The `id' program in *Note Printing out User Information: Id Program,
uses these functions.


File: gawk.info,  Node: Sample Programs,  Next: Language History,  Prev: Library Functions,  Up: Top

Practical `awk' Programs
************************

   *Note A Library of `awk' Functions: Library Functions, presents the
idea that reading programs in a language contributes to learning that
language.  This major node continues that theme, presenting a potpourri
of `awk' programs for your reading enjoyment.

   Many of these programs use the library functions presented in *Note
A Library of `awk' Functions: Library Functions.

* Menu:

* Running Examples::            How to run these examples.
* Clones::                      Clones of common utilities.
* Miscellaneous Programs::      Some interesting `awk' programs.


File: gawk.info,  Node: Running Examples,  Next: Clones,  Prev: Sample Programs,  Up: Sample Programs

Running the Example Programs
============================

   To run a given program, you would typically do something like this:

     awk -f PROGRAM -- OPTIONS FILES

Here, PROGRAM is the name of the `awk' program (such as `cut.awk'),
OPTIONS are any command-line options for the program that start with a
`-', and FILES are the actual data files.

   If your system supports the `#!' executable interpreter mechanism
(*note Executable `awk' Programs: Executable Scripts.), you can instead
run your program directly:

     cut.awk -c1-8 myfiles > results

   If your `awk' is not `gawk', you may instead need to use this:

     cut.awk -- -c1-8 myfiles > results


File: gawk.info,  Node: Clones,  Next: Miscellaneous Programs,  Prev: Running Examples,  Up: Sample Programs

Reinventing Wheels for Fun and Profit
=====================================

   This minor node presents a number of POSIX utilities that are
implemented in `awk'.  Reinventing these programs in `awk' is often
enjoyable, because the algorithms can be very clearly expressed, and
the code is usually very concise and simple.  This is true because
`awk' does so much for you.

   It should be noted that these programs are not necessarily intended
to replace the installed versions on your system.  Instead, their
purpose is to illustrate `awk' language programming for "real world"
tasks.

   The programs are presented in alphabetical order.

* Menu:

* Cut Program::                 The `cut' utility.
* Egrep Program::               The `egrep' utility.
* Id Program::                  The `id' utility.
* Split Program::               The `split' utility.
* Tee Program::                 The `tee' utility.
* Uniq Program::                The `uniq' utility.
* Wc Program::                  The `wc' utility.


File: gawk.info,  Node: Cut Program,  Next: Egrep Program,  Prev: Clones,  Up: Clones

Cutting out Fields and Columns
------------------------------

   The `cut' utility selects, or "cuts," characters or fields from its
standard input and sends them to its standard output.  Fields are
separated by tabs by default, but you may supply a command-line option
to change the field "delimiter" (i.e., the field-separator character).
`cut''s definition of fields is less general than `awk''s.

   A common use of `cut' might be to pull out just the login name of
logged-on users from the output of `who'.  For example, the following
pipeline generates a sorted, unique list of the logged-on users:

     who | cut -c1-8 | sort | uniq

   The options for `cut' are:

`-c LIST'
     Use LIST as the list of characters to cut out.  Items within the
     list may be separated by commas, and ranges of characters can be
     separated with dashes.  The list `1-8,15,22-35' specifies
     characters 1 through 8, 15, and 22 through 35.

`-f LIST'
     Use LIST as the list of fields to cut out.

`-d DELIM'
     Use DELIM as the field-separator character instead of the tab
     character.

`-s'
     Suppress printing of lines that do not contain the field delimiter.

   The `awk' implementation of `cut' uses the `getopt' library function
(*note Processing Command-Line Options: Getopt Function.)  and the
`join' library function (*note Merging an Array into a String: Join
Function.).

   The program begins with a comment describing the options, the library
functions needed, and a `usage' function that prints out a usage
message and exits.  `usage' is called if invalid arguments are supplied:

     # cut.awk --- implement cut in awk
     # Options:
     #    -f list     Cut fields
     #    -d c        Field delimiter character
     #    -c list     Cut characters
     #
     #    -s          Suppress lines without the delimiter
     #
     # Requires getopt and join library functions
     
     function usage(    e1, e2)
     {
         e1 = "usage: cut [-f list] [-d c] [-s] [files...]"
         e2 = "usage: cut [-c list] [files...]"
         print e1 > "/dev/stderr"
         print e2 > "/dev/stderr"
         exit 1
     }

The variables `e1' and `e2' are used so that the function fits nicely
on the screen.

   Next comes a `BEGIN' rule that parses the command-line options.  It
sets `FS' to a single TAB character, because that is `cut''s default
field separator.  The output field separator is also set to be the same
as the input field separator.  Then `getopt' is used to step through
the command-line options.  Exactly one of the variables `by_fields' or
`by_chars' is set to true, to indicate that processing should be done
by fields or by characters, respectively.  When cutting by characters,
the output field separator is set to the null string:

     BEGIN    \
     {
         FS = "\t"    # default
         OFS = FS
         while ((c = getopt(ARGC, ARGV, "sf:c:d:")) != -1) {
             if (c == "f") {
                 by_fields = 1
                 fieldlist = Optarg
             } else if (c == "c") {
                 by_chars = 1
                 fieldlist = Optarg
                 OFS = ""
             } else if (c == "d") {
                 if (length(Optarg) > 1) {
                     printf("Using first character of %s" \
                     " for delimiter\n", Optarg) > "/dev/stderr"
                     Optarg = substr(Optarg, 1, 1)
                 }
                 FS = Optarg
                 OFS = FS
                 if (FS == " ")    # defeat awk semantics
                     FS = "[ ]"
             } else if (c == "s")
                 suppress++
             else
                 usage()
         }
     
         for (i = 1; i < Optind; i++)
             ARGV[i] = ""

   Special care is taken when the field delimiter is a space.  Using a
single space (`" "') for the value of `FS' is incorrect--`awk' would
separate fields with runs of spaces, tabs, and/or newlines, and we want
them to be separated with individual spaces.  Also, note that after
`getopt' is through, we have to clear out all the elements of `ARGV'
from 1 to `Optind', so that `awk' does not try to process the
command-line options as file names.

   After dealing with the command-line options, the program verifies
that the options make sense.  Only one or the other of `-c' and `-f'
should be used, and both require a field list.  Then the program calls
either `set_fieldlist' or `set_charlist' to pull apart the list of
fields or characters:

         if (by_fields && by_chars)
             usage()
     
         if (by_fields == 0 && by_chars == 0)
             by_fields = 1    # default
     
         if (fieldlist == "") {
             print "cut: needs list for -c or -f" > "/dev/stderr"
             exit 1
         }
     
         if (by_fields)
             set_fieldlist()
         else
             set_charlist()
     }

   `set_fieldlist'  is used to split the field list apart at the commas
and into an array.  Then, for each element of the array, it looks to
see if it is actually a range, and if so, splits it apart. The range is
verified to make sure the first number is smaller than the second.
Each number in the list is added to the `flist' array, which simply
lists the fields that will be printed.  Normal field splitting is used.
The program lets `awk' handle the job of doing the field splitting:

     function set_fieldlist(        n, m, i, j, k, f, g)
     {
         n = split(fieldlist, f, ",")
         j = 1    # index in flist
         for (i = 1; i <= n; i++) {
             if (index(f[i], "-") != 0) { # a range
                 m = split(f[i], g, "-")
                 if (m != 2 || g[1] >= g[2]) {
                     printf("bad field list: %s\n",
                                       f[i]) > "/dev/stderr"
                     exit 1
                 }
                 for (k = g[1]; k <= g[2]; k++)
                     flist[j++] = k
             } else
                 flist[j++] = f[i]
         }
         nfields = j - 1
     }

   The `set_charlist' function is more complicated than `set_fieldlist'.
The idea here is to use `gawk''s `FIELDWIDTHS' variable (*note Reading
Fixed-Width Data: Constant Size.), which describes constant-width
input.  When using a character list, that is exactly what we have.

   Setting up `FIELDWIDTHS' is more complicated than simply listing the
fields that need to be printed.  We have to keep track of the fields to
print and also the intervening characters that have to be skipped.  For
example, suppose you wanted characters 1 through 8, 15, and 22 through
35.  You would use `-c 1-8,15,22-35'.  The necessary value for
`FIELDWIDTHS' is `"8 6 1 6 14"'.  This yields five fields, and the
fields to print are `$1', `$3', and `$5'.  The intermediate fields are
"filler", which is stuff in between the desired data.  `flist' lists
the fields to print, and `t' tracks the complete field list, including
filler fields:

     function set_charlist(    field, i, j, f, g, t,
                               filler, last, len)
     {
         field = 1   # count total fields
         n = split(fieldlist, f, ",")
         j = 1       # index in flist
         for (i = 1; i <= n; i++) {
             if (index(f[i], "-") != 0) { # range
                 m = split(f[i], g, "-")
                 if (m != 2 || g[1] >= g[2]) {
                     printf("bad character list: %s\n",
                                    f[i]) > "/dev/stderr"
                     exit 1
                 }
                 len = g[2] - g[1] + 1
                 if (g[1] > 1)  # compute length of filler
                     filler = g[1] - last - 1
                 else
                     filler = 0
                 if (filler)
                     t[field++] = filler
                 t[field++] = len  # length of field
                 last = g[2]
                 flist[j++] = field - 1
             } else {
                 if (f[i] > 1)
                     filler = f[i] - last - 1
                 else
                     filler = 0
                 if (filler)
                     t[field++] = filler
                 t[field++] = 1
                 last = f[i]
                 flist[j++] = field - 1
             }
         }
         FIELDWIDTHS = join(t, 1, field - 1)
         nfields = j - 1
     }

   Next is the rule that actually processes the data.  If the `-s'
option is given, then `suppress' is true.  The first `if' statement
makes sure that the input record does have the field separator.  If
`cut' is processing fields, `suppress' is true, and the field separator
character is not in the record, then the record is skipped.

   If the record is valid, then `gawk' has split the data into fields,
either using the character in `FS' or using fixed-length fields and
`FIELDWIDTHS'.  The loop goes through the list of fields that should be
printed.  The corresponding field is printed if it contains data.  If
the next field also has data, then the separator character is written
out between the fields:

     {
         if (by_fields && suppress && index($0, FS) != 0)
             next
     
         for (i = 1; i <= nfields; i++) {
             if ($flist[i] != "") {
                 printf "%s", $flist[i]
                 if (i < nfields && $flist[i+1] != "")
                     printf "%s", OFS
             }
         }
         print ""
     }

   This version of `cut' relies on `gawk''s `FIELDWIDTHS' variable to
do the character-based cutting.  While it is possible in other `awk'
implementations to use `substr' (*note String Manipulation Functions:
String Functions.), it is also extremely painful.  The `FIELDWIDTHS'
variable supplies an elegant solution to the problem of picking the
input line apart by characters.


File: gawk.info,  Node: Egrep Program,  Next: Id Program,  Prev: Cut Program,  Up: Clones

Searching for Regular Expressions in Files
------------------------------------------

   The `egrep' utility searches files for patterns.  It uses regular
expressions that are almost identical to those available in `awk'
(*note Regular Expressions: Regexp.).  It is used in the following
manner:

     egrep [ OPTIONS ] 'PATTERN' FILES ...

   The PATTERN is a regular expression.  In typical usage, the regular
expression is quoted to prevent the shell from expanding any of the
special characters as file name wildcards.  Normally, `egrep' prints
the lines that matched.  If multiple file names are provided on the
command line, each output line is preceded by the name of the file and
a colon.

   The options to `egrep' are as follows:

`-c'
     Print out a count of the lines that matched the pattern, instead
     of the lines themselves.

`-s'
     Be silent.  No output is produced and the exit value indicates
     whether the pattern was matched.

`-v'
     Invert the sense of the test. `egrep' prints the lines that do
     _not_ match the pattern and exits successfully if the pattern is
     not matched.

`-i'
     Ignore case distinctions in both the pattern and the input data.

`-l'
     Only print (list) the names of the files that matched, not the
     lines that matched.

`-e PATTERN'
     Use PATTERN as the regexp to match.  The purpose of the `-e'
     option is to allow patterns that start with a `-'.

   This version uses the `getopt' library function (*note Processing
Command-Line Options: Getopt Function.)  and the file transition
library program (*note Noting Data File Boundaries: Filetrans
Function.).

   The program begins with a descriptive comment and then a `BEGIN' rule
that processes the command-line arguments with `getopt'.  The `-i'
(ignore case) option is particularly easy with `gawk'; we just use the
`IGNORECASE' built-in variable (*note Built-in Variables::):

     # egrep.awk --- simulate egrep in awk
     # Options:
     #    -c    count of lines
     #    -s    silent - use exit value
     #    -v    invert test, success if no match
     #    -i    ignore case
     #    -l    print filenames only
     #    -e    argument is pattern
     #
     # Requires getopt and file transition library functions
     
     BEGIN {
         while ((c = getopt(ARGC, ARGV, "ce:svil")) != -1) {
             if (c == "c")
                 count_only++
             else if (c == "s")
                 no_print++
             else if (c == "v")
                 invert++
             else if (c == "i")
                 IGNORECASE = 1
             else if (c == "l")
                 filenames_only++
             else if (c == "e")
                 pattern = Optarg
             else
                 usage()
         }

   Next comes the code that handles the `egrep'-specific behavior. If no
pattern is supplied with `-e', the first nonoption on the command line
is used.  The `awk' command-line arguments up to `ARGV[Optind]' are
cleared, so that `awk' won't try to process them as files.  If no files
are specified, the standard input is used, and if multiple files are
specified, we make sure to note this so that the file names can precede
the matched lines in the output:

         if (pattern == "")
             pattern = ARGV[Optind++]
     
         for (i = 1; i < Optind; i++)
             ARGV[i] = ""
         if (Optind >= ARGC) {
             ARGV[1] = "-"
             ARGC = 2
         } else if (ARGC - Optind > 1)
             do_filenames++
     
     #    if (IGNORECASE)
     #        pattern = tolower(pattern)
     }

   The last two lines are commented out, since they are not needed in
`gawk'.  They should be uncommented if you have to use another version
of `awk'.

   The next set of lines should be uncommented if you are not using
`gawk'.  This rule translates all the characters in the input line into
lowercase if the `-i' option is specified.(1) The rule is commented out
since it is not necessary with `gawk':

     #{
     #    if (IGNORECASE)
     #        $0 = tolower($0)
     #}

   The `beginfile' function is called by the rule in `ftrans.awk' when
each new file is processed.  In this case, it is very simple; all it
does is initialize a variable `fcount' to zero. `fcount' tracks how
many lines in the current file matched the pattern (naming the
parameter `junk' shows we know that `beginfile' is called with a
parameter, but that we're not interested in its value):

     function beginfile(junk)
     {
         fcount = 0
     }

   The `endfile' function is called after each file has been processed.
It affects the output only when the user wants a count of the number of
lines that matched.  `no_print' is true only if the exit status is
desired.  `count_only' is true if line counts are desired.  `egrep'
therefore only prints line counts if printing and counting are enabled.
The output format must be adjusted depending upon the number of files to
process.  Finally, `fcount' is added to `total', so that we know the
total number of lines that matched the pattern:

     function endfile(file)
     {
         if (! no_print && count_only)
             if (do_filenames)
                 print file ":" fcount
             else
                 print fcount
     
         total += fcount
     }

   The following rule does most of the work of matching lines. The
variable `matches' is true if the line matched the pattern. If the user
wants lines that did not match, the sense of `matches' is inverted
using the `!' operator. `fcount' is incremented with the value of
`matches', which is either one or zero, depending upon a successful or
unsuccessful match.  If the line does not match, the `next' statement
just moves on to the next record.

   A number of additional tests are made, but they are only done if we
are not counting lines.  First, if the user only wants exit status
(`no_print' is true), then it is enough to know that _one_ line in this
file matched, and we can skip on to the next file with `nextfile'.
Similarly, if we are only printing file names, we can print the file
name, and then skip to the next file with `nextfile'.  Finally, each
line is printed, with a leading file name and colon if necessary:

     {
         matches = ($0 ~ pattern)
         if (invert)
             matches = ! matches
     
         fcount += matches    # 1 or 0
     
         if (! matches)
             next
     
         if (! count_only) {
             if (no_print)
                 nextfile
     
             if (filenames_only) {
                 print FILENAME
                 nextfile
             }
     
             if (do_filenames)
                 print FILENAME ":" $0
             else
                 print
         }
     }

   The `END' rule takes care of producing the correct exit status. If
there are no matches, the exit status is one; otherwise it is zero:

     END    \
     {
         if (total == 0)
             exit 1
         exit 0
     }

   The `usage' function prints a usage message in case of invalid
options, and then exits:

     function usage(    e)
     {
         e = "Usage: egrep [-csvil] [-e pat] [files ...]"
         e = e "\n\tegrep [-csvil] pat [files ...]"
         print e > "/dev/stderr"
         exit 1
     }

   The variable `e' is used so that the function fits nicely on the
printed page.

   Just a note on programming style: you may have noticed that the `END'
rule uses backslash continuation, with the open brace on a line by
itself.  This is so that it more closely resembles the way functions
are written.  Many of the examples in this major node use this style.
You can decide for yourself if you like writing your `BEGIN' and `END'
rules this way or not.

   ---------- Footnotes ----------

   (1) It also introduces a subtle bug; if a match happens, we output
the translated line, not the original.


File: gawk.info,  Node: Id Program,  Next: Split Program,  Prev: Egrep Program,  Up: Clones

Printing out User Information
-----------------------------

   The `id' utility lists a user's real and effective user ID numbers,
real and effective group ID numbers, and the user's group set, if any.
`id' only prints the effective user ID and group ID if they are
different from the real ones.  If possible, `id' also supplies the
corresponding user and group names.  The output might look like this:

     $ id
     -| uid=2076(arnold) gid=10(staff) groups=10(staff),4(tty)

   This information is part of what is provided by `gawk''s `PROCINFO'
array (*note Built-in Variables::).  However, the `id' utility provides
a more palatable output than just individual numbers.

   Here is a simple version of `id' written in `awk'.  It uses the user
database library functions (*note Reading the User Database: Passwd
Functions.)  and the group database library functions (*note Reading
the Group Database: Group Functions.):

   The program is fairly straightforward.  All the work is done in the
`BEGIN' rule.  The user and group ID numbers are obtained from
`PROCINFO'.  The code is repetitive.  The entry in the user database
for the real user ID number is split into parts at the `:'. The name is
the first field.  Similar code is used for the effective user ID number
and the group numbers:

     # id.awk --- implement id in awk
     #
     # Requires user and group library functions
     # output is:
     # uid=12(foo) euid=34(bar) gid=3(baz) \
     #             egid=5(blat) groups=9(nine),2(two),1(one)
     
     BEGIN    \
     {
         uid = PROCINFO["uid"]
         euid = PROCINFO["euid"]
         gid = PROCINFO["gid"]
         egid = PROCINFO["egid"]
     
         printf("uid=%d", uid)
         pw = getpwuid(uid)
         if (pw != "") {
             split(pw, a, ":")
             printf("(%s)", a[1])
         }
     
         if (euid != uid) {
             printf(" euid=%d", euid)
             pw = getpwuid(euid)
             if (pw != "") {
                 split(pw, a, ":")
                 printf("(%s)", a[1])
             }
         }
     
         printf(" gid=%d", gid)
         pw = getgrgid(gid)
         if (pw != "") {
             split(pw, a, ":")
             printf("(%s)", a[1])
         }
     
         if (egid != gid) {
             printf(" egid=%d", egid)
             pw = getgrgid(egid)
             if (pw != "") {
                 split(pw, a, ":")
                 printf("(%s)", a[1])
             }
         }
     
         for (i = 1; ("group" i) in PROCINFO; i++) {
             if (i == 1)
                 printf(" groups=")
             group = PROCINFO["group" i]
             printf("%d", group)
             pw = getgrgid(group)
             if (pw != "") {
                 split(pw, a, ":")
                 printf("(%s)", a[1])
             }
             if (("group" (i+1)) in PROCINFO)
                 printf(",")
         }
     
         print ""
     }

   The test in the `for' loop is worth noting.  Any supplementary
groups in the `PROCINFO' array have the indices `"group1"' through
`"groupN"' for some N, i.e., the total number of supplementary groups.
However, we don't know in advance how many of these groups there are.

   This loop works by starting at one, concatenating the value with
`"group"', and then using `in' to see if that value is in the array.
Eventually, `i' is incremented past the last group in the array and the
loop exits.

   The loop is also correct if there are _no_ supplementary groups;
then the condition is false the first time it's tested, and the loop
body never executes.


File: gawk.info,  Node: Split Program,  Next: Tee Program,  Prev: Id Program,  Up: Clones

Splitting a Large File into Pieces
----------------------------------

   The `split' program splits large text files into smaller pieces.
Usage is as follows:

     split [-COUNT] file [ PREFIX ]

   By default, the output files are named `xaa', `xab', and so on. Each
file has 1000 lines in it, with the likely exception of the last file.
To change the number of lines in each file, supply a number on the
command line preceded with a minus; e.g., `-500' for files with 500
lines in them instead of 1000.  To change the name of the output files
to something like `myfileaa', `myfileab', and so on, supply an
additional argument that specifies the file name prefix.

   Here is a version of `split' in `awk'. It uses the `ord' and `chr'
functions presented in *Note Translating Between Characters and
Numbers: Ordinal Functions.

   The program first sets its defaults, and then tests to make sure
there are not too many arguments.  It then looks at each argument in
turn.  The first argument could be a minus sign followed by a number.
If it is, this happens to look like a negative number, so it is made
positive, and that is the count of lines.  The data file name is
skipped over and the final argument is used as the prefix for the
output file names:

     # split.awk --- do split in awk
     #
     # Requires ord and chr library functions
     # usage: split [-num] [file] [outname]
     
     BEGIN {
         outfile = "x"    # default
         count = 1000
         if (ARGC > 4)
             usage()
     
         i = 1
         if (ARGV[i] ~ /^-[0-9]+$/) {
             count = -ARGV[i]
             ARGV[i] = ""
             i++
         }
         # test argv in case reading from stdin instead of file
         if (i in ARGV)
             i++    # skip data file name
         if (i in ARGV) {
             outfile = ARGV[i]
             ARGV[i] = ""
         }
     
         s1 = s2 = "a"
         out = (outfile s1 s2)
     }

   The next rule does most of the work. `tcount' (temporary count)
tracks how many lines have been printed to the output file so far. If
it is greater than `count', it is time to close the current file and
start a new one.  `s1' and `s2' track the current suffixes for the file
name. If they are both `z', the file is just too big.  Otherwise, `s1'
moves to the next letter in the alphabet and `s2' starts over again at
`a':

     {
         if (++tcount > count) {
             close(out)
             if (s2 == "z") {
                 if (s1 == "z") {
                     printf("split: %s is too large to split\n",
                            FILENAME) > "/dev/stderr"
                     exit 1
                 }
                 s1 = chr(ord(s1) + 1)
                 s2 = "a"
             }
             else
                 s2 = chr(ord(s2) + 1)
             out = (outfile s1 s2)
             tcount = 1
         }
         print > out
     }

The `usage' function simply prints an error message and exits:

     function usage(   e)
     {
         e = "usage: split [-num] [file] [outname]"
         print e > "/dev/stderr"
         exit 1
     }

The variable `e' is used so that the function fits nicely on the screen.

   This program is a bit sloppy; it relies on `awk' to automatically
close the last file instead of doing it in an `END' rule.  It also
assumes that letters are contiguous in the character set, which isn't
true for EBCDIC systems.


File: gawk.info,  Node: Tee Program,  Next: Uniq Program,  Prev: Split Program,  Up: Clones

Duplicating Output into Multiple Files
--------------------------------------

   The `tee' program is known as a "pipe fitting."  `tee' copies its
standard input to its standard output and also duplicates it to the
files named on the command line.  Its usage is as follows:

     tee [-a] file ...

   The `-a' option tells `tee' to append to the named files, instead of
truncating them and starting over.

   The `BEGIN' rule first makes a copy of all the command-line arguments
into an array named `copy'.  `ARGV[0]' is not copied, since it is not
needed.  `tee' cannot use `ARGV' directly, since `awk' attempts to
process each file name in `ARGV' as input data.

   If the first argument is `-a', then the flag variable `append' is
set to true, and both `ARGV[1]' and `copy[1]' are deleted. If `ARGC' is
less than two, then no file names were supplied and `tee' prints a
usage message and exits.  Finally, `awk' is forced to read the standard
input by setting `ARGV[1]' to `"-"' and `ARGC' to two:

     # tee.awk --- tee in awk
     BEGIN    \
     {
         for (i = 1; i < ARGC; i++)
             copy[i] = ARGV[i]
     
         if (ARGV[1] == "-a") {
             append = 1
             delete ARGV[1]
             delete copy[1]
             ARGC--
         }
         if (ARGC < 2) {
             print "usage: tee [-a] file ..." > "/dev/stderr"
             exit 1
         }
         ARGV[1] = "-"
         ARGC = 2
     }

   The single rule does all the work.  Since there is no pattern, it is
executed for each line of input.  The body of the rule simply prints the
line into each file on the command line, and then to the standard
output:

     {
         # moving the if outside the loop makes it run faster
         if (append)
             for (i in copy)
                 print >> copy[i]
         else
             for (i in copy)
                 print > copy[i]
         print
     }

It is also possible to write the loop this way:

     for (i in copy)
         if (append)
             print >> copy[i]
         else
             print > copy[i]

This is more concise but it is also less efficient.  The `if' is tested
for each record and for each output file.  By duplicating the loop
body, the `if' is only tested once for each input record.  If there are
N input records and M output files, the first method only executes N
`if' statements, while the second executes N`*'M `if' statements.

   Finally, the `END' rule cleans up by closing all the output files:

     END    \
     {
         for (i in copy)
             close(copy[i])
     }


File: gawk.info,  Node: Uniq Program,  Next: Wc Program,  Prev: Tee Program,  Up: Clones

Printing Nonduplicated Lines of Text
------------------------------------

   The `uniq' utility reads sorted lines of data on its standard input,
and by default removes duplicate lines.  In other words, it only prints
unique lines--hence the name.  `uniq' has a number of options. The
usage is as follows:

     uniq [-udc [-N]] [+N] [ INPUT FILE [ OUTPUT FILE ]]

   The options for `uniq' are:

`-d'
     Pnly print only repeated lines.

`-u'
     Print only nonrepeated lines.

`-c'
     Count lines. This option overrides `-d' and `-u'.  Both repeated
     and nonrepeated lines are counted.

`-N'
     Skip N fields before comparing lines.  The definition of fields is
     similar to `awk''s default: nonwhitespace characters separated by
     runs of spaces and/or tabs.

`+N'
     Skip N characters before comparing lines.  Any fields specified
     with `-N' are skipped first.

`INPUT FILE'
     Data is read from the input file named on the command line,
     instead of from the standard input.

`OUTPUT FILE'
     The generated output is sent to the named output file, instead of
     to the standard output.

   Normally `uniq' behaves as if both the `-d' and `-u' options are
provided.

   `uniq' uses the `getopt' library function (*note Processing
Command-Line Options: Getopt Function.)  and the `join' library function
(*note Merging an Array into a String: Join Function.).

   The program begins with a `usage' function and then a brief outline
of the options and their meanings in a comment.  The `BEGIN' rule deals
with the command-line arguments and options. It uses a trick to get
`getopt' to handle options of the form `-25', treating such an option
as the option letter `2' with an argument of `5'. If indeed two or more
digits are supplied (`Optarg' looks like a number), `Optarg' is
concatenated with the option digit and then the result is added to zero
to make it into a number.  If there is only one digit in the option,
then `Optarg' is not needed. In this case, `Optind' must be decremented
so that `getopt' processes it next time.  This code is admittedly a bit
tricky.

   If no options are supplied, then the default is taken, to print both
repeated and nonrepeated lines.  The output file, if provided, is
assigned to `outputfile'.  Early on, `outputfile' is initialized to the
standard output, `/dev/stdout':

     # uniq.awk --- do uniq in awk
     #
     # Requires getopt and join library functions
     function usage(    e)
     {
         e = "Usage: uniq [-udc [-n]] [+n] [ in [ out ]]"
         print e > "/dev/stderr"
         exit 1
     }
     
     # -c    count lines. overrides -d and -u
     # -d    only repeated lines
     # -u    only non-repeated lines
     # -n    skip n fields
     # +n    skip n characters, skip fields first
     
     BEGIN   \
     {
         count = 1
         outputfile = "/dev/stdout"
         opts = "udc0:1:2:3:4:5:6:7:8:9:"
         while ((c = getopt(ARGC, ARGV, opts)) != -1) {
             if (c == "u")
                 non_repeated_only++
             else if (c == "d")
                 repeated_only++
             else if (c == "c")
                 do_count++
             else if (index("0123456789", c) != 0) {
                 # getopt requires args to options
                 # this messes us up for things like -5
                 if (Optarg ~ /^[0-9]+$/)
                     fcount = (c Optarg) + 0
                 else {
                     fcount = c + 0
                     Optind--
                 }
             } else
                 usage()
         }
     
         if (ARGV[Optind] ~ /^\+[0-9]+$/) {
             charcount = substr(ARGV[Optind], 2) + 0
             Optind++
         }
     
         for (i = 1; i < Optind; i++)
             ARGV[i] = ""
     
         if (repeated_only == 0 && non_repeated_only == 0)
             repeated_only = non_repeated_only = 1
     
         if (ARGC - Optind == 2) {
             outputfile = ARGV[ARGC - 1]
             ARGV[ARGC - 1] = ""
         }
     }

   The following function, `are_equal', compares the current line,
`$0', to the previous line, `last'.  It handles skipping fields and
characters.  If no field count and no character count are specified,
`are_equal' simply returns one or zero depending upon the result of a
simple string comparison of `last' and `$0'.  Otherwise, things get more
complicated.  If fields have to be skipped, each line is broken into an
array using `split' (*note String Manipulation Functions: String
Functions.); the desired fields are then joined back into a line using
`join'.  The joined lines are stored in `clast' and `cline'.  If no
fields are skipped, `clast' and `cline' are set to `last' and `$0',
respectively.  Finally, if characters are skipped, `substr' is used to
strip off the leading `charcount' characters in `clast' and `cline'.
The two strings are then compared and `are_equal' returns the result:

     function are_equal(    n, m, clast, cline, alast, aline)
     {
         if (fcount == 0 && charcount == 0)
             return (last == $0)
     
         if (fcount > 0) {
             n = split(last, alast)
             m = split($0, aline)
             clast = join(alast, fcount+1, n)
             cline = join(aline, fcount+1, m)
         } else {
             clast = last
             cline = $0
         }
         if (charcount) {
             clast = substr(clast, charcount + 1)
             cline = substr(cline, charcount + 1)
         }
     
         return (clast == cline)
     }

   The following two rules are the body of the program.  The first one
is executed only for the very first line of data.  It sets `last' equal
to `$0', so that subsequent lines of text have something to be compared
to.

   The second rule does the work. The variable `equal' is one or zero,
depending upon the results of `are_equal''s comparison. If `uniq' is
counting repeated lines, and the lines are equal, then it increments
the `count' variable.  Otherwise, it prints the line and resets `count',
since the two lines are not equal.

   If `uniq' is not counting, and if the lines are equal, `count' is
incremented.  Nothing is printed, since the point is to remove
duplicates.  Otherwise, if `uniq' is counting repeated lines and more
than one line is seen, or if `uniq' is counting nonrepeated lines and
only one line is seen, then the line is printed, and `count' is reset.

   Finally, similar logic is used in the `END' rule to print the final
line of input data:

     NR == 1 {
         last = $0
         next
     }
     
     {
         equal = are_equal()
     
         if (do_count) {    # overrides -d and -u
             if (equal)
                 count++
             else {
                 printf("%4d %s\n", count, last) > outputfile
                 last = $0
                 count = 1    # reset
             }
             next
         }
     
         if (equal)
             count++
         else {
             if ((repeated_only && count > 1) ||
                 (non_repeated_only && count == 1))
                     print last > outputfile
             last = $0
             count = 1
         }
     }
     
     END {
         if (do_count)
             printf("%4d %s\n", count, last) > outputfile
         else if ((repeated_only && count > 1) ||
                 (non_repeated_only && count == 1))
             print last > outputfile
     }


File: gawk.info,  Node: Wc Program,  Prev: Uniq Program,  Up: Clones

Counting Things
---------------

   The `wc' (word count) utility counts lines, words, and characters in
one or more input files. Its usage is as follows:

     wc [-lwc] [ FILES ... ]

   If no files are specified on the command line, `wc' reads its
standard input. If there are multiple files, it also prints total
counts for all the files.  The options and their meanings are shown in
the following list:

`-l'
     Count only lines.

`-w'
     Count only words.  A "word" is a contiguous sequence of
     nonwhitespace characters, separated by spaces and/or tabs.
     Luckily, this is the normal way `awk' separates fields in its
     input data.

`-c'
     Count only characters.

   Implementing `wc' in `awk' is particularly elegant, since `awk' does
a lot of the work for us; it splits lines into words (i.e., fields) and
counts them, it counts lines (i.e., records), and it can easily tell us
how long a line is.

   This uses the `getopt' library function (*note Processing
Command-Line Options: Getopt Function.)  and the file-transition
functions (*note Noting Data File Boundaries: Filetrans Function.).

   This version has one notable difference from traditional versions of
`wc': it always prints the counts in the order lines, words, and
characters.  Traditional versions note the order of the `-l', `-w', and
`-c' options on the command line, and print the counts in that order.

   The `BEGIN' rule does the argument processing.  The variable
`print_total' is true if more than one file is named on the command
line:

     # wc.awk --- count lines, words, characters
     
     # Options:
     #    -l    only count lines
     #    -w    only count words
     #    -c    only count characters
     #
     # Default is to count lines, words, characters
     #
     # Requires getopt and file transition library functions
     
     BEGIN {
         # let getopt print a message about
         # invalid options. we ignore them
         while ((c = getopt(ARGC, ARGV, "lwc")) != -1) {
             if (c == "l")
                 do_lines = 1
             else if (c == "w")
                 do_words = 1
             else if (c == "c")
                 do_chars = 1
         }
         for (i = 1; i < Optind; i++)
             ARGV[i] = ""
     
         # if no options, do all
         if (! do_lines && ! do_words && ! do_chars)
             do_lines = do_words = do_chars = 1
     
         print_total = (ARGC - i > 2)
     }

   The `beginfile' function is simple; it just resets the counts of
lines, words, and characters to zero, and saves the current file name in
`fname':

     function beginfile(file)
     {
         chars = lines = words = 0
         fname = FILENAME
     }

   The `endfile' function adds the current file's numbers to the running
totals of lines, words, and characters.(1)  It then prints out those
numbers for the file that was just read. It relies on `beginfile' to
reset the numbers for the following data file:

     function endfile(file)
     {
         tchars += chars
         tlines += lines
         twords += words
         if (do_lines)
             printf "\t%d", lines
         if (do_words)
             printf "\t%d", words
         if (do_chars)
             printf "\t%d", chars
         printf "\t%s\n", fname
     }

   There is one rule that is executed for each line. It adds the length
of the record, plus one, to `chars'.  Adding one plus the record length
is needed because the newline character separating records (the value
of `RS') is not part of the record itself, and thus not included in its
length.  Next, `lines' is incremented for each line read, and `words'
is incremented by the value of `NF', which is the number of "words" on
this line:

     # do per line
     {
         chars += length($0) + 1    # get newline
         lines++
         words += NF
     }

   Finally, the `END' rule simply prints the totals for all the files:

     END {
         if (print_total) {
             if (do_lines)
                 printf "\t%d", tlines
             if (do_words)
                 printf "\t%d", twords
             if (do_chars)
                 printf "\t%d", tchars
             print "\ttotal"
         }
     }

   ---------- Footnotes ----------

   (1) `wc' can't just use the value of `FNR' in `endfile'. If you
examine the code in *Note Noting Data File Boundaries: Filetrans
Function you will see that `FNR' has already been reset by the time
`endfile' is called.


File: gawk.info,  Node: Miscellaneous Programs,  Prev: Clones,  Up: Sample Programs

A Grab Bag of `awk' Programs
============================

   This minor node is a large "grab bag" of miscellaneous programs.  We
hope you find them both interesting and enjoyable.

* Menu:

* Dupword Program::             Finding duplicated words in a document.
* Alarm Program::               An alarm clock.
* Translate Program::           A program similar to the `tr' utility.
* Labels Program::              Printing mailing labels.
* Word Sorting::                A program to produce a word usage count.
* History Sorting::             Eliminating duplicate entries from a history
                                file.
* Extract Program::             Pulling out programs from Texinfo source
                                files.
* Simple Sed::                  A Simple Stream Editor.
* Igawk Program::               A wrapper for `awk' that includes
                                files.


File: gawk.info,  Node: Dupword Program,  Next: Alarm Program,  Prev: Miscellaneous Programs,  Up: Miscellaneous Programs

Finding Duplicated Words in a Document
--------------------------------------

   A common error when writing large amounts of prose is to accidentally
duplicate words.  Typically you will see this in text as something like
"the the program does the following..."  When the text is online, often
the duplicated words occur at the end of one line and the beginning of
another, making them very difficult to spot.

   This program, `dupword.awk', scans through a file one line at a time
and looks for adjacent occurrences of the same word.  It also saves the
last word on a line (in the variable `prev') for comparison with the
first word on the next line.

   The first two statements make sure that the line is all lowercase,
so that, for example, "The" and "the" compare equal to each other.  The
next statement replaces nonalphanumeric and nonwhitespace characters
with spaces, so that punctuation does not affect the comparison either.
The characters are replaced with spaces so that formatting controls
don't create nonsense words (e.g., the Texinfo `@code{NF}' becomes
`codeNF' if punctuation is simply deleted).  The record is then resplit
into fields, yielding just the actual words on the line, and ensuring
that there are no empty fields.

   If there are no fields left after removing all the punctuation, the
current record is skipped.  Otherwise, the program loops through each
word, comparing it to the previous one:

     # dupword.awk --- find duplicate words in text
     {
         $0 = tolower($0)
         gsub(/[^[:alnum:][:blank:]]/, " ");
         $0 = $0         # re-split
         if (NF == 0)
             next
         if ($1 == prev)
             printf("%s:%d: duplicate %s\n",
                 FILENAME, FNR, $1)
         for (i = 2; i <= NF; i++)
             if ($i == $(i-1))
                 printf("%s:%d: duplicate %s\n",
                     FILENAME, FNR, $i)
         prev = $NF
     }


File: gawk.info,  Node: Alarm Program,  Next: Translate Program,  Prev: Dupword Program,  Up: Miscellaneous Programs

An Alarm Clock Program
----------------------

     Nothing cures insomnia like a ringing alarm clock.
     Arnold Robbins

   The following program is a simple "alarm clock" program.  You give
it a time of day and an optional message.  At the specified time, it
prints the message on the standard output. In addition, you can give it
the number of times to repeat the message as well as a delay between
repetitions.

   This program uses the `gettimeofday' function from *Note Managing
the Time of Day: Gettimeofday Function.

   All the work is done in the `BEGIN' rule.  The first part is argument
checking and setting of defaults: the delay, the count, and the message
to print.  If the user supplied a message without the ASCII BEL
character (known as the "alert" character, `"\a"'), then it is added to
the message.  (On many systems, printing the ASCII BEL generates an
audible alert. Thus when the alarm goes off, the system calls attention
to itself in case the user is not looking at the computer or terminal.)
Here is the program:

     # alarm.awk --- set an alarm
     #
     # Requires gettimeofday library function
     # usage: alarm time [ "message" [ count [ delay ] ] ]
     
     BEGIN    \
     {
         # Initial argument sanity checking
         usage1 = "usage: alarm time ['message' [count [delay]]]"
         usage2 = sprintf("\t(%s) time ::= hh:mm", ARGV[1])
     
         if (ARGC < 2) {
             print usage1 > "/dev/stderr"
             print usage2 > "/dev/stderr"
             exit 1
         } else if (ARGC == 5) {
             delay = ARGV[4] + 0
             count = ARGV[3] + 0
             message = ARGV[2]
         } else if (ARGC == 4) {
             count = ARGV[3] + 0
             message = ARGV[2]
         } else if (ARGC == 3) {
             message = ARGV[2]
         } else if (ARGV[1] !~ /[0-9]?[0-9]:[0-9][0-9]/) {
             print usage1 > "/dev/stderr"
             print usage2 > "/dev/stderr"
             exit 1
         }
     
         # set defaults for once we reach the desired time
         if (delay == 0)
             delay = 180    # 3 minutes
         if (count == 0)
             count = 5
         if (message == "")
             message = sprintf("\aIt is now %s!\a", ARGV[1])
         else if (index(message, "\a") == 0)
             message = "\a" message "\a"

   The next minor node of code turns the alarm time into hours and
minutes, converts it (if necessary) to a 24-hour clock, and then turns
that time into a count of the seconds since midnight.  Next it turns
the current time into a count of seconds since midnight.  The
difference between the two is how long to wait before setting off the
alarm:

         # split up alarm time
         split(ARGV[1], atime, ":")
         hour = atime[1] + 0    # force numeric
         minute = atime[2] + 0  # force numeric
     
         # get current broken down time
         gettimeofday(now)
     
         # if time given is 12-hour hours and it's after that
         # hour, e.g., `alarm 5:30' at 9 a.m. means 5:30 p.m.,
         # then add 12 to real hour
         if (hour < 12 && now["hour"] > hour)
             hour += 12
     
         # set target time in seconds since midnight
         target = (hour * 60 * 60) + (minute * 60)
     
         # get current time in seconds since midnight
         current = (now["hour"] * 60 * 60) + \
                    (now["minute"] * 60) + now["second"]
     
         # how long to sleep for
         naptime = target - current
         if (naptime <= 0) {
             print "time is in the past!" > "/dev/stderr"
             exit 1
         }

   Finally, the program uses the `system' function (*note Input/Output
Functions: I/O Functions.)  to call the `sleep' utility.  The `sleep'
utility simply pauses for the given number of seconds.  If the exit
status is not zero, the program assumes that `sleep' was interrupted
and exits. If `sleep' exited with an OK status (zero), then the program
prints the message in a loop, again using `sleep' to delay for however
many seconds are necessary:

         # zzzzzz..... go away if interrupted
         if (system(sprintf("sleep %d", naptime)) != 0)
             exit 1
     
         # time to notify!
         command = sprintf("sleep %d", delay)
         for (i = 1; i <= count; i++) {
             print message
             # if sleep command interrupted, go away
             if (system(command) != 0)
                 break
         }
     
         exit 0
     }


File: gawk.info,  Node: Translate Program,  Next: Labels Program,  Prev: Alarm Program,  Up: Miscellaneous Programs

Transliterating Characters
--------------------------

   The system `tr' utility transliterates characters.  For example, it
is often used to map uppercase letters into lowercase for further
processing:

     GENERATE DATA | tr 'A-Z' 'a-z' | PROCESS DATA ...

   `tr' requires two lists of characters.(1)  When processing the
input, the first character in the first list is replaced with the first
character in the second list, the second character in the first list is
replaced with the second character in the second list, and so on.  If
there are more characters in the "from" list than in the "to" list, the
last character of the "to" list is used for the remaining characters in
the "from" list.

   Some time ago, a user proposed that a transliteration function should
be added to `gawk'.  The following program was written to prove that
character transliteration could be done with a user-level function.
This program is not as complete as the system `tr' utility but it does
most of the job.

   The `translate' program demonstrates one of the few weaknesses of
standard `awk': dealing with individual characters is very painful,
requiring repeated use of the `substr', `index', and `gsub' built-in
functions (*note String Manipulation Functions: String Functions.).(2)
There are two functions.  The first, `stranslate', takes three
arguments:

`from'
     A list of characters from which to translate.

`to'
     A list of characters to which to translate.

`target'
     The string on which to do the translation.

   Associative arrays make the translation part fairly easy. `t_ar'
holds the "to" characters, indexed by the "from" characters.  Then a
simple loop goes through `from', one character at a time.  For each
character in `from', if the character appears in `target', `gsub' is
used to change it to the corresponding `to' character.

   The `translate' function simply calls `stranslate' using `$0' as the
target.  The main program sets two global variables, `FROM' and `TO',
from the command line, and then changes `ARGV' so that `awk' reads from
the standard input.

   Finally, the processing rule simply calls `translate' for each
record:

     # translate.awk --- do tr-like stuff
     # Bugs: does not handle things like: tr A-Z a-z, it has
     # to be spelled out. However, if `to' is shorter than `from',
     # the last character in `to' is used for the rest of `from'.
     
     function stranslate(from, to, target,     lf, lt, t_ar, i, c)
     {
         lf = length(from)
         lt = length(to)
         for (i = 1; i <= lt; i++)
             t_ar[substr(from, i, 1)] = substr(to, i, 1)
         if (lt < lf)
             for (; i <= lf; i++)
                 t_ar[substr(from, i, 1)] = substr(to, lt, 1)
         for (i = 1; i <= lf; i++) {
             c = substr(from, i, 1)
             if (index(target, c) > 0)
                 gsub(c, t_ar[c], target)
         }
         return target
     }
     
     function translate(from, to)
     {
         return $0 = stranslate(from, to, $0)
     }
     
     # main program
     BEGIN {
         if (ARGC < 3) {
             print "usage: translate from to" > "/dev/stderr"
             exit
         }
         FROM = ARGV[1]
         TO = ARGV[2]
         ARGC = 2
         ARGV[1] = "-"
     }
     
     {
         translate(FROM, TO)
         print
     }

   While it is possible to do character transliteration in a user-level
function, it is not necessarily efficient, and we (the `gawk' authors)
started to consider adding a built-in function.  However, shortly after
writing this program, we learned that the System V Release 4 `awk' had
added the `toupper' and `tolower' functions (*note String Manipulation
Functions: String Functions.).  These functions handle the vast
majority of the cases where character transliteration is necessary, and
so we chose to simply add those functions to `gawk' as well and then
leave well enough alone.

   An obvious improvement to this program would be to set up the `t_ar'
array only once, in a `BEGIN' rule. However, this assumes that the
"from" and "to" lists will never change throughout the lifetime of the
program.

   ---------- Footnotes ----------

   (1) On some older System V systems, `tr' may require that the lists
be written as range expressions enclosed in square brackets (`[a-z]')
and quoted, to prevent the shell from attempting a file name expansion.
This is not a feature.

   (2) This program was written before `gawk' acquired the ability to
split each character in a string into separate array elements.


File: gawk.info,  Node: Labels Program,  Next: Word Sorting,  Prev: Translate Program,  Up: Miscellaneous Programs

Printing Mailing Labels
-----------------------

   Here is a "real world"(1) program.  This script reads lists of names
and addresses and generates mailing labels.  Each page of labels has 20
labels on it, 2 across and 10 down.  The addresses are guaranteed to be
no more than 5 lines of data.  Each address is separated from the next
by a blank line.

   The basic idea is to read 20 labels worth of data.  Each line of
each label is stored in the `line' array.  The single rule takes care
of filling the `line' array and printing the page when 20 labels have
been read.

   The `BEGIN' rule simply sets `RS' to the empty string, so that `awk'
splits records at blank lines (*note How Input Is Split into Records:
Records.).  It sets `MAXLINES' to 100, since 100 is the maximum number
of lines on the page (20 * 5 = 100).

   Most of the work is done in the `printpage' function.  The label
lines are stored sequentially in the `line' array.  But they have to
print horizontally; `line[1]' next to `line[6]', `line[2]' next to
`line[7]', and so on.  Two loops are used to accomplish this.  The
outer loop, controlled by `i', steps through every 10 lines of data;
this is each row of labels.  The inner loop, controlled by `j', goes
through the lines within the row.  As `j' goes from 0 to 4, `i+j' is
the `j'-th line in the row, and `i+j+5' is the entry next to it.  The
output ends up looking something like this:

     line 1          line 6
     line 2          line 7
     line 3          line 8
     line 4          line 9
     line 5          line 10
     ...

   As a final note, an extra blank line is printed at lines 21 and 61,
to keep the output lined up on the labels.  This is dependent on the
particular brand of labels in use when the program was written.  You
will also note that there are 2 blank lines at the top and 2 blank
lines at the bottom.

   The `END' rule arranges to flush the final page of labels; there may
not have been an even multiple of 20 labels in the data:

     # labels.awk --- print mailing labels
     
     # Each label is 5 lines of data that may have blank lines.
     # The label sheets have 2 blank lines at the top and 2 at
     # the bottom.
     
     BEGIN    { RS = "" ; MAXLINES = 100 }
     
     function printpage(    i, j)
     {
         if (Nlines <= 0)
             return
     
         printf "\n\n"        # header
     
         for (i = 1; i <= Nlines; i += 10) {
             if (i == 21 || i == 61)
                 print ""
             for (j = 0; j < 5; j++) {
                 if (i + j > MAXLINES)
                     break
                 printf "   %-41s %s\n", line[i+j], line[i+j+5]
             }
             print ""
         }
     
         printf "\n\n"        # footer
     
         for (i in line)
             line[i] = ""
     }
     
     # main rule
     {
         if (Count >= 20) {
             printpage()
             Count = 0
             Nlines = 0
         }
         n = split($0, a, "\n")
         for (i = 1; i <= n; i++)
             line[++Nlines] = a[i]
         for (; i <= 5; i++)
             line[++Nlines] = ""
         Count++
     }
     
     END    \
     {
         printpage()
     }

   ---------- Footnotes ----------

   (1) "Real world" is defined as "a program actually used to get
something done."


File: gawk.info,  Node: Word Sorting,  Next: History Sorting,  Prev: Labels Program,  Up: Miscellaneous Programs

Generating Word-Usage Counts
----------------------------

   The following `awk' program prints the number of occurrences of each
word in its input.  It illustrates the associative nature of `awk'
arrays by using strings as subscripts.  It also demonstrates the `for
INDEX in ARRAY' mechanism.  Finally, it shows how `awk' is used in
conjunction with other utility programs to do a useful task of some
complexity with a minimum of effort.  Some explanations follow the
program listing:

     # Print list of word frequencies
     {
         for (i = 1; i <= NF; i++)
             freq[$i]++
     }
     
     END {
         for (word in freq)
             printf "%s\t%d\n", word, freq[word]
     }

   This program has two rules.  The first rule, because it has an empty
pattern, is executed for every input line.  It uses `awk''s
field-accessing mechanism (*note Examining Fields: Fields.) to pick out
the individual words from the line, and the built-in variable `NF'
(*note Built-in Variables::) to know how many fields are available.
For each input word, it increments an element of the array `freq' to
reflect that the word has been seen an additional time.

   The second rule, because it has the pattern `END', is not executed
until the input has been exhausted.  It prints out the contents of the
`freq' table that has been built up inside the first action.  This
program has several problems that would prevent it from being useful by
itself on real text files:

   * Words are detected using the `awk' convention that fields are
     separated just by whitespace.  Other characters in the input
     (except newlines) don't have any special meaning to `awk'.  This
     means that punctuation characters count as part of words.

   * The `awk' language considers upper- and lowercase characters to be
     distinct.  Therefore, "bartender" and "Bartender" are not treated
     as the same word.  This is undesirable, since in normal text, words
     are capitalized if they begin sentences, and a frequency analyzer
     should not be sensitive to capitalization.

   * The output does not come out in any useful order.  You're more
     likely to be interested in which words occur most frequently or in
     having an alphabetized table of how frequently each word occurs.

   The way to solve these problems is to use some of `awk''s more
advanced features.  First, we use `tolower' to remove case
distinctions.  Next, we use `gsub' to remove punctuation characters.
Finally, we use the system `sort' utility to process the output of the
`awk' script.  Here is the new version of the program:

     # wordfreq.awk --- print list of word frequencies
     
     {
         $0 = tolower($0)    # remove case distinctions
         # remove punctuation
         gsub(/[^[:alnum:]_[:blank:]]/, "", $0)
         for (i = 1; i <= NF; i++)
             freq[$i]++
     }
     
     END {
         for (word in freq)
             printf "%s\t%d\n", word, freq[word]
     }

   Assuming we have saved this program in a file named `wordfreq.awk',
and that the data is in `file1', the following pipeline:

     awk -f wordfreq.awk file1 | sort -k 2nr

produces a table of the words appearing in `file1' in order of
decreasing frequency.  The `awk' program suitably massages the data and
produces a word frequency table, which is not ordered.

   The `awk' script's output is then sorted by the `sort' utility and
printed on the terminal.  The options given to `sort' specify a sort
that uses the second field of each input line (skipping one field),
that the sort keys should be treated as numeric quantities (otherwise
`15' would come before `5'), and that the sorting should be done in
descending (reverse) order.

   The `sort' could even be done from within the program, by changing
the `END' action to:

     END {
         sort = "sort -k 2nr"
         for (word in freq)
             printf "%s\t%d\n", word, freq[word] | sort
         close(sort)
     }

   This way of sorting must be used on systems that do not have true
pipes at the command-line (or batch-file) level.  See the general
operating system documentation for more information on how to use the
`sort' program.


File: gawk.info,  Node: History Sorting,  Next: Extract Program,  Prev: Word Sorting,  Up: Miscellaneous Programs

Removing Duplicates from Unsorted Text
--------------------------------------

   The `uniq' program (*note Printing Nonduplicated Lines of Text: Uniq
Program.), removes duplicate lines from _sorted_ data.

   Suppose, however, you need to remove duplicate lines from a data
file but that you want to preserve the order the lines are in.  A good
example of this might be a shell history file.  The history file keeps
a copy of all the commands you have entered, and it is not unusual to
repeat a command several times in a row.  Occasionally you might want
to compact the history by removing duplicate entries.  Yet it is
desirable to maintain the order of the original commands.

   This simple program does the job.  It uses two arrays.  The `data'
array is indexed by the text of each line.  For each line, `data[$0]'
is incremented.  If a particular line has not been seen before, then
`data[$0]' is zero.  In this case, the text of the line is stored in
`lines[count]'.  Each element of `lines' is a unique command, and the
indices of `lines' indicate the order in which those lines are
encountered.  The `END' rule simply prints out the lines, in order:

     # histsort.awk --- compact a shell history file
     # Thanks to Byron Rakitzis for the general idea
     {
         if (data[$0]++ == 0)
             lines[++count] = $0
     }
     
     END {
         for (i = 1; i <= count; i++)
             print lines[i]
     }

   This program also provides a foundation for generating other useful
information.  For example, using the following `print' statement in the
`END' rule indicates how often a particular command is used:

     print data[lines[i]], lines[i]

   This works because `data[$0]' is incremented each time a line is
seen.


File: gawk.info,  Node: Extract Program,  Next: Simple Sed,  Prev: History Sorting,  Up: Miscellaneous Programs

Extracting Programs from Texinfo Source Files
---------------------------------------------

   The nodes *Note A Library of `awk' Functions: Library Functions, and
*Note Practical `awk' Programs: Sample Programs, are the top level
nodes for a large number of `awk' programs.  If you want to experiment
with these programs, it is tedious to have to type them in by hand.
Here we present a program that can extract parts of a Texinfo input
file into separate files.

   This Info file is written in Texinfo, the GNU project's document
formatting language.  A single Texinfo source file can be used to
produce both printed and online documentation.  The Texinfo language is
described fully, starting with *Note Top::.

   For our purposes, it is enough to know three things about Texinfo
input files:

   * The "at" symbol (`@') is special in Texinfo, much as the backslash
     (`\') is in C or `awk'.  Literal `@' symbols are represented in
     Texinfo source files as `@@'.

   * Comments start with either `@c' or `@comment'.  The
     file-extraction program works by using special comments that start
     at the beginning of a line.

   * Lines containing `@group' and `@end group' commands bracket
     example text that should not be split across a page boundary.
     (Unfortunately, TeX isn't always smart enough to do things exactly
     right, and we have to give it some help.)

   The following program, `extract.awk', reads through a Texinfo source
file and does two things, based on the special comments.  Upon seeing
`@c system ...', it runs a command, by extracting the command text from
the control line and passing it on to the `system' function (*note
Input/Output Functions: I/O Functions.).  Upon seeing `@c file
FILENAME', each subsequent line is sent to the file FILENAME, until `@c
endfile' is encountered.  The rules in `extract.awk' match either `@c'
or `@comment' by letting the `omment' part be optional.  Lines
containing `@group' and `@end group' are simply removed.  `extract.awk'
uses the `join' library function (*note Merging an Array into a String:
Join Function.).

   The example programs in the online Texinfo source for `GAWK:
Effective AWK Programming' (`gawk.texi') have all been bracketed inside
`file' and `endfile' lines.  The `gawk' distribution uses a copy of
`extract.awk' to extract the sample programs and install many of them
in a standard directory where `gawk' can find them.  The Texinfo file
looks something like this:

     ...
     This program has a @code{BEGIN} rule,
     that prints a nice message:
     
     @example
     @c file examples/messages.awk
     BEGIN @{ print "Don't panic!" @}
     @c end file
     @end example
     
     It also prints some final advice:
     
     @example
     @c file examples/messages.awk
     END @{ print "Always avoid bored archeologists!" @}
     @c end file
     @end example
     ...

   `extract.awk' begins by setting `IGNORECASE' to one, so that mixed
upper- and lowercase letters in the directives won't matter.

   The first rule handles calling `system', checking that a command is
given (`NF' is at least three) and also checking that the command exits
with a zero exit status, signifying OK:

     # extract.awk --- extract files and run programs
     #                 from texinfo files
     BEGIN    { IGNORECASE = 1 }
     
     /^@c(omment)?[ \t]+system/    \
     {
         if (NF < 3) {
             e = (FILENAME ":" FNR)
             e = (e  ": badly formed `system' line")
             print e > "/dev/stderr"
             next
         }
         $1 = ""
         $2 = ""
         stat = system($0)
         if (stat != 0) {
             e = (FILENAME ":" FNR)
             e = (e ": warning: system returned " stat)
             print e > "/dev/stderr"
         }
     }

The variable `e' is used so that the function fits nicely on the screen.

   The second rule handles moving data into files.  It verifies that a
file name is given in the directive.  If the file named is not the
current file, then the current file is closed.  Keeping the current file
open until a new file is encountered allows the use of the `>'
redirection for printing the contents, keeping open file management
simple.

   The `for' loop does the work.  It reads lines using `getline' (*note
Explicit Input with `getline': Getline.).  For an unexpected end of
file, it calls the `unexpected_eof' function.  If the line is an
"endfile" line, then it breaks out of the loop.  If the line is an
`@group' or `@end group' line, then it ignores it and goes on to the
next line.  Similarly, comments within examples are also ignored.

   Most of the work is in the following few lines.  If the line has no
`@' symbols, the program can print it directly.  Otherwise, each
leading `@' must be stripped off.  To remove the `@' symbols, the line
is split into separate elements of the array `a', using the `split'
function (*note String Manipulation Functions: String Functions.).  The
`@' symbol is used as the separator character.  Each element of `a'
that is empty indicates two successive `@' symbols in the original
line.  For each two empty elements (`@@' in the original file), we have
to add a single `@' symbol back in.

   When the processing of the array is finished, `join' is called with
the value of `SUBSEP', to rejoin the pieces back into a single line.
That line is then printed to the output file:

     /^@c(omment)?[ \t]+file/    \
     {
         if (NF != 3) {
             e = (FILENAME ":" FNR ": badly formed `file' line")
             print e > "/dev/stderr"
             next
         }
         if ($3 != curfile) {
             if (curfile != "")
                 close(curfile)
             curfile = $3
         }
     
         for (;;) {
             if ((getline line) <= 0)
                 unexpected_eof()
             if (line ~ /^@c(omment)?[ \t]+endfile/)
                 break
             else if (line ~ /^@(end[ \t]+)?group/)
                 continue
             else if (line ~ /^@c(omment+)?[ \t]+/)
                 continue
             if (index(line, "@") == 0) {
                 print line > curfile
                 continue
             }
             n = split(line, a, "@")
             # if a[1] == "", means leading @,
             # don't add one back in.
             for (i = 2; i <= n; i++) {
                 if (a[i] == "") { # was an @@
                     a[i] = "@"
                     if (a[i+1] == "")
                         i++
                 }
             }
             print join(a, 1, n, SUBSEP) > curfile
         }
     }

   An important thing to note is the use of the `>' redirection.
Output done with `>' only opens the file once; it stays open and
subsequent output is appended to the file (*note Redirecting Output of
`print' and `printf': Redirection.).  This makes it easy to mix program
text and explanatory prose for the same sample source file (as has been
done here!) without any hassle.  The file is only closed when a new
data file name is encountered or at the end of the input file.

   Finally, the function `unexpected_eof' prints an appropriate error
message and then exits.  The `END' rule handles the final cleanup,
closing the open file:

     function unexpected_eof() {
         printf("%s:%d: unexpected EOF or error\n",
             FILENAME, FNR) > "/dev/stderr"
         exit 1
     }
     
     END {
         if (curfile)
             close(curfile)
     }


File: gawk.info,  Node: Simple Sed,  Next: Igawk Program,  Prev: Extract Program,  Up: Miscellaneous Programs

A Simple Stream Editor
----------------------

   The `sed' utility is a stream editor, a program that reads a stream
of data, makes changes to it, and passes it on.  It is often used to
make global changes to a large file or to a stream of data generated by
a pipeline of commands.  While `sed' is a complicated program in its
own right, its most common use is to perform global substitutions in
the middle of a pipeline:

     command1 < orig.data | sed 's/old/new/g' | command2 > result

   Here, `s/old/new/g' tells `sed' to look for the regexp `old' on each
input line and globally replace it with the text `new', i.e., all the
occurrences on a line.  This is similar to `awk''s `gsub' function
(*note String Manipulation Functions: String Functions.).

   The following program, `awksed.awk', accepts at least two
command-line arguments: the pattern to look for and the text to replace
it with. Any additional arguments are treated as data file names to
process. If none are provided, the standard input is used:

     # awksed.awk --- do s/foo/bar/g using just print
     #    Thanks to Michael Brennan for the idea
     function usage()
     {
         print "usage: awksed pat repl [files...]" > "/dev/stderr"
         exit 1
     }
     
     BEGIN {
         # validate arguments
         if (ARGC < 3)
             usage()
     
         RS = ARGV[1]
         ORS = ARGV[2]
     
         # don't use arguments as files
         ARGV[1] = ARGV[2] = ""
     }
     
     # look ma, no hands!
     {
         if (RT == "")
             printf "%s", $0
         else
             print
     }

   The program relies on `gawk''s ability to have `RS' be a regexp, as
well as on the setting of `RT' to the actual text that terminates the
record (*note How Input Is Split into Records: Records.).

   The idea is to have `RS' be the pattern to look for. `gawk'
automatically sets `$0' to the text between matches of the pattern.
This is text that we want to keep, unmodified.  Then, by setting `ORS'
to the replacement text, a simple `print' statement outputs the text we
want to keep, followed by the replacement text.

   There is one wrinkle to this scheme, which is what to do if the last
record doesn't end with text that matches `RS'.  Using a `print'
statement unconditionally prints the replacement text, which is not
correct.  However, if the file did not end in text that matches `RS',
`RT' is set to the null string.  In this case, we can print `$0' using
`printf' (*note Using `printf' Statements for Fancier Printing:
Printf.).

   The `BEGIN' rule handles the setup, checking for the right number of
arguments and calling `usage' if there is a problem. Then it sets `RS'
and `ORS' from the command-line arguments and sets `ARGV[1]' and
`ARGV[2]' to the null string, so that they are not treated as file names
(*note Using `ARGC' and `ARGV': ARGC and ARGV.).

   The `usage' function prints an error message and exits.  Finally,
the single rule handles the printing scheme outlined above, using
`print' or `printf' as appropriate, depending upon the value of `RT'.


File: gawk.info,  Node: Igawk Program,  Prev: Simple Sed,  Up: Miscellaneous Programs

An Easy Way to Use Library Functions
------------------------------------

   Using library functions in `awk' can be very beneficial. It
encourages code reuse and the writing of general functions. Programs are
smaller and therefore clearer.  However, using library functions is
only easy when writing `awk' programs; it is painful when running them,
requiring multiple `-f' options.  If `gawk' is unavailable, then so too
is the `AWKPATH' environment variable and the ability to put `awk'
functions into a library directory (*note Command-Line Options:
Options.).  It would be nice to be able to write programs in the
following manner:

     # library functions
     @include getopt.awk
     @include join.awk
     ...
     
     # main program
     BEGIN {
         while ((c = getopt(ARGC, ARGV, "a:b:cde")) != -1)
             ...
         ...
     }

   The following program, `igawk.sh', provides this service.  It
simulates `gawk''s searching of the `AWKPATH' variable and also allows
"nested" includes; i.e., a file that is included with `@include' can
contain further `@include' statements.  `igawk' makes an effort to only
include files once, so that nested includes don't accidentally include
a library function twice.

   `igawk' should behave just like `gawk' externally.  This means it
should accept all of `gawk''s command-line arguments, including the
ability to have multiple source files specified via `-f', and the
ability to mix command-line and library source files.

   The program is written using the POSIX Shell (`sh') command language.
It works as follows:

  1. Loop through the arguments, saving anything that doesn't represent
     `awk' source code for later, when the expanded program is run.

  2. For any arguments that do represent `awk' text, put the arguments
     into a temporary file that will be expanded.  There are two cases:

       a. Literal text, provided with `--source' or `--source='.  This
          text is just echoed directly.  The `echo' program
          automatically supplies a trailing newline.

       b. Source file names, provided with `-f'.  We use a neat trick
          and echo `@include FILENAME' into the temporary file.  Since
          the file-inclusion program works the way `gawk' does, this
          gets the text of the file included into the program at the
          correct point.

  3. Run an `awk' program (naturally) over the temporary file to expand
     `@include' statements.  The expanded program is placed in a second
     temporary file.

  4. Run the expanded program with `gawk' and any other original
     command-line arguments that the user supplied (such as the data
     file names).

   The initial part of the program turns on shell tracing if the first
argument is `debug'.  Otherwise, a shell `trap' statement arranges to
clean up any temporary files on program exit or upon an interrupt.

   The next part loops through all the command-line arguments.  There
are several cases of interest:

`--'
     This ends the arguments to `igawk'.  Anything else should be
     passed on to the user's `awk' program without being evaluated.

`-W'
     This indicates that the next option is specific to `gawk'.  To make
     argument processing easier, the `-W' is appended to the front of
     the remaining arguments and the loop continues.  (This is an `sh'
     programming trick.  Don't worry about it if you are not familiar
     with `sh'.)

`-v, -F'
     These are saved and passed on to `gawk'.

`-f, --file, --file=, -Wfile='
     The file name is saved to a temporary file with an `@include'
     statement.  The `sed' utility is used to remove the leading option
     part of the argument (e.g., `--file=').

`--source, --source=, -Wsource='
     The source text is echoed into a temporary file.

`--version, -Wversion'
     `igawk' prints its version number, runs `gawk --version' to get
     the `gawk' version information, and then exits.

   If none of the `-f', `--file', `-Wfile', `--source', or `-Wsource'
arguments are supplied, then the first nonoption argument should be the
`awk' program.  If there are no command-line arguments left, `igawk'
prints an error message and exits.  Otherwise, the first argument is
echoed into a temporary file.  In any case, after the arguments have
been processed, the complete text of the original `awk' program is
contained in a temporary file.

   The program is as follows:

     #! /bin/sh
     # igawk --- like gawk but do @include processing
     if [ "$1" = debug ]
     then
         set -x
         shift
     else
         # cleanup on exit, hangup, interrupt, quit, termination
         trap 'rm -f $STEMPFILE $ETEMPFILE' EXIT HUP INT QUIT TERM
     fi
     
     while [ $# -ne 0 ] # loop over arguments
     do
         case $1 in
         --)     shift; break;;
     
         -W)     shift
                 set -- -W"$@"
                 continue;;
     
         -[vF])  opts="$opts $1 '$2'"
                 shift;;
     
         -[vF]*) opts="$opts '$1'" ;;
     
         -f)     echo @include "$2" >> $STEMPFILE
                 shift;;
     
         -f*)    f=`echo "$1" | sed 's/-f//'`
                 echo @include "$f" >> $STEMPFILE ;;
     
         -?file=*)    # -Wfile or --file
                 f=`echo "$1" | sed 's/-.file=//'`
                 echo @include "$f" >> $STEMPFILE ;;
     
         -?file)      # get arg, $2
                 echo @include "$2" >> $STEMPFILE
                 shift;;
     
         -?source=*)  # -Wsource or --source
                 t=`echo "$1" | sed 's/-.source=//'`
                 echo "$t" >> $STEMPFILE ;;
     
         -?source)    # get arg, $2
                 echo "$2" >> $STEMPFILE
                 shift;;
     
         -?version)
                 echo igawk: version 1.0 1>&2
                 gawk --version
                 exit 0 ;;
     
         -[W-]*) opts="$opts '$1'" ;;
     
         *)      break;;
         esac
         shift
     done
     
     if [ ! -s $STEMPFILE ]
     then
         if [ -z "$1" ]
         then
              echo igawk: no program! 1>&2
              exit 1
         else
             echo "$1" > $STEMPFILE
             shift
         fi
     fi
     
     # at this point, $STEMPFILE has the program

   The `awk' program to process `@include' directives reads through the
program, one line at a time, using `getline' (*note Explicit Input with
`getline': Getline.).  The input file names and `@include' statements
are managed using a stack.  As each `@include' is encountered, the
current file name is "pushed" onto the stack and the file named in the
`@include' directive becomes the current file name.  As each file is
finished, the stack is "popped," and the previous input file becomes
the current input file again.  The process is started by making the
original file the first one on the stack.

   The `pathto' function does the work of finding the full path to a
file.  It simulates `gawk''s behavior when searching the `AWKPATH'
environment variable (*note The `AWKPATH' Environment Variable: AWKPATH
Variable.).  If a file name has a `/' in it, no path search is done.
Otherwise, the file name is concatenated with the name of each
directory in the path, and an attempt is made to open the generated
file name.  The only way to test if a file can be read in `awk' is to go
ahead and try to read it with `getline'; this is what `pathto' does.(1)
If the file can be read, it is closed and the file name is returned:

     gawk -- '
     # process @include directives
     
     function pathto(file,    i, t, junk)
     {
         if (index(file, "/") != 0)
             return file
     
         for (i = 1; i <= ndirs; i++) {
             t = (pathlist[i] "/" file)
             if ((getline junk < t) > 0) {
                 # found it
                 close(t)
                 return t
             }
         }
         return ""
     }

   The main program is contained inside one `BEGIN' rule.  The first
thing it does is set up the `pathlist' array that `pathto' uses.  After
splitting the path on `:', null elements are replaced with `"."', which
represents the current directory:

     BEGIN {
         path = ENVIRON["AWKPATH"]
         ndirs = split(path, pathlist, ":")
         for (i = 1; i <= ndirs; i++) {
             if (pathlist[i] == "")
                 pathlist[i] = "."
         }

   The stack is initialized with `ARGV[1]', which will be `$STEMPFILE'.
The main loop comes next.  Input lines are read in succession. Lines
that do not start with `@include' are printed verbatim.  If the line
does start with `@include', the file name is in `$2'.  `pathto' is
called to generate the full path.  If it cannot, then we print an error
message and continue.

   The next thing to check is if the file is included already.  The
`processed' array is indexed by the full file name of each included
file and it tracks this information for us.  If the file is seen again,
a warning message is printed. Otherwise, the new file name is pushed
onto the stack and processing continues.

   Finally, when `getline' encounters the end of the input file, the
file is closed and the stack is popped.  When `stackptr' is less than
zero, the program is done:

         stackptr = 0
         input[stackptr] = ARGV[1] # ARGV[1] is first file
     
         for (; stackptr >= 0; stackptr--) {
             while ((getline < input[stackptr]) > 0) {
                 if (tolower($1) != "@include") {
                     print
                     continue
                 }
                 fpath = pathto($2)
                 if (fpath == "") {
                     printf("igawk:%s:%d: cannot find %s\n",
                         input[stackptr], FNR, $2) > "/dev/stderr"
                     continue
                 }
                 if (! (fpath in processed)) {
                     processed[fpath] = input[stackptr]
                     input[++stackptr] = fpath  # push onto stack
                 } else
                     print $2, "included in", input[stackptr],
                         "already included in",
                         processed[fpath] > "/dev/stderr"
             }
             close(input[stackptr])
         }
     }' $STEMPFILE > $ETEMPFILE

   The last step is to call `gawk' with the expanded program, along
with the original options and command-line arguments that the user
supplied.  `gawk''s exit status is passed back on to `igawk''s calling
program:

     eval gawk -f $ETEMPFILE $opts -- "$@"
     
     exit $?

   This version of `igawk' represents my third attempt at this program.
There are three key simplifications that make the program work better:

   * Using `@include' even for the files named with `-f' makes building
     the initial collected `awk' program much simpler; all the
     `@include' processing can be done once.

   * Not trying to save the line read with `getline' in the `pathto'
     function when testing for the file's accessibility for use with
     the main program simplifies things considerably.

   * Using a `getline' loop in the `BEGIN' rule does it all in one
     place.  It is not necessary to call out to a separate loop for
     processing nested `@include' statements.

   Also, this program illustrates that it is often worthwhile to combine
`sh' and `awk' programming together.  You can usually accomplish quite
a lot, without having to resort to low-level programming in C or C++,
and it is frequently easier to do certain kinds of string and argument
manipulation using the shell than it is in `awk'.

   Finally, `igawk' shows that it is not always necessary to add new
features to a program; they can often be layered on top.  With `igawk',
there is no real reason to build `@include' processing into `gawk'
itself.

   As an additional example of this, consider the idea of having two
files in a directory in the search path:

`default.awk'
     This file contains a set of default library functions, such as
     `getopt' and `assert'.

`site.awk'
     This file contains library functions that are specific to a site or
     installation; i.e., locally developed functions.  Having a
     separate file allows `default.awk' to change with new `gawk'
     releases, without requiring the system administrator to update it
     each time by adding the local functions.

   One user suggested that `gawk' be modified to automatically read
these files upon startup.  Instead, it would be very simple to modify
`igawk' to do this. Since `igawk' can process nested `@include'
directives, `default.awk' could simply contain `@include' statements
for the desired library functions.

   ---------- Footnotes ----------

   (1) On some very old versions of `awk', the test `getline junk < t'
can loop forever if the file exists but is empty.  Caveat emptor.


File: gawk.info,  Node: Language History,  Next: Installation,  Prev: Sample Programs,  Up: Top

The Evolution of the `awk' Language
***********************************

   This Info file describes the GNU implementation of `awk', which
follows the POSIX specification.  Many long-time `awk' users learned
`awk' programming with the original `awk' implementation in Version 7
Unix.  (This implementation was the basis for `awk' in Berkeley Unix,
through 4.3-Reno.  Subsequent versions of Berkeley Unix, and systems
derived from 4.4BSD-Lite, use various versions of `gawk' for their
`awk'.)  This major node briefly describes the evolution of the `awk'
language, with cross-references to other parts of the Info file where
you can find more information.

* Menu:

* V7/SVR3.1::                   The major changes between V7 and System V
                                Release 3.1.
* SVR4::                        Minor changes between System V Releases 3.1
                                and 4.
* POSIX::                       New features from the POSIX standard.
* BTL::                         New features from the Bell Laboratories
                                version of `awk'.
* POSIX/GNU::                   The extensions in `gawk' not in POSIX
                                `awk'.
* Contributors::                The major contributors to `gawk'.


File: gawk.info,  Node: V7/SVR3.1,  Next: SVR4,  Prev: Language History,  Up: Language History

Major Changes Between V7 and SVR3.1
===================================

   The `awk' language evolved considerably between the release of
Version 7 Unix (1978) and the new version that was first made generally
available in System V Release 3.1 (1987).  This minor node summarizes
the changes, with cross-references to further details:

   * The requirement for `;' to separate rules on a line (*note `awk'
     Statements Versus Lines: Statements/Lines.).

   * User-defined functions and the `return' statement (*note
     User-Defined Functions: User-defined.).

   * The `delete' statement (*note The `delete' Statement: Delete.).

   * The `do'-`while' statement (*note The `do'-`while' Statement: Do
     Statement.).

   * The built-in functions `atan2', `cos', `sin', `rand', and `srand'
     (*note Numeric Functions::).

   * The built-in functions `gsub', `sub', and `match' (*note String
     Manipulation Functions: String Functions.).

   * The built-in functions `close' and `system' (*note Input/Output
     Functions: I/O Functions.).

   * The `ARGC', `ARGV', `FNR', `RLENGTH', `RSTART', and `SUBSEP'
     built-in variables (*note Built-in Variables::).

   * The conditional expression using the ternary operator `?:' (*note
     Conditional Expressions: Conditional Exp.).

   * The exponentiation operator `^' (*note Arithmetic Operators:
     Arithmetic Ops.) and its assignment operator form `^=' (*note
     Assignment Expressions: Assignment Ops.).

   * C-compatible operator precedence, which breaks some old `awk'
     programs (*note Operator Precedence (How Operators Nest):
     Precedence.).

   * Regexps as the value of `FS' (*note Specifying How Fields Are
     Separated: Field Separators.) and as the third argument to the
     `split' function (*note String Manipulation Functions: String
     Functions.).

   * Dynamic regexps as operands of the `~' and `!~' operators (*note
     How to Use Regular Expressions: Regexp Usage.).

   * The escape sequences `\b', `\f', and `\r' (*note Escape
     Sequences::).  (Some vendors have updated their old versions of
     `awk' to recognize `\b', `\f', and `\r', but this is not something
     you can rely on.)

   * Redirection of input for the `getline' function (*note Explicit
     Input with `getline': Getline.).

   * Multiple `BEGIN' and `END' rules (*note The `BEGIN' and `END'
     Special Patterns: BEGIN/END.).

   * Multidimensional arrays (*note Multidimensional Arrays:
     Multi-dimensional.).


File: gawk.info,  Node: SVR4,  Next: POSIX,  Prev: V7/SVR3.1,  Up: Language History

Changes Between SVR3.1 and SVR4
===============================

   The System V Release 4 (1989) version of Unix `awk' added these
features (some of which originated in `gawk'):

   * The `ENVIRON' variable (*note Built-in Variables::).

   * Multiple `-f' options on the command line (*note Command-Line
     Options: Options.).

   * The `-v' option for assigning variables before program execution
     begins (*note Command-Line Options: Options.).

   * The `--' option for terminating command-line options.

   * The `\a', `\v', and `\x' escape sequences (*note Escape
     Sequences::).

   * A defined return value for the `srand' built-in function (*note
     Numeric Functions::).

   * The `toupper' and `tolower' built-in string functions for case
     translation (*note String Manipulation Functions: String
     Functions.).

   * A cleaner specification for the `%c' format-control letter in the
     `printf' function (*note Format-Control Letters: Control Letters.).

   * The ability to dynamically pass the field width and precision
     (`"%*.*d"') in the argument list of the `printf' function (*note
     Format-Control Letters: Control Letters.).

   * The use of regexp constants, such as `/foo/', as expressions, where
     they are equivalent to using the matching operator, as in `$0 ~
     /foo/' (*note Using Regular Expression Constants: Using Constant
     Regexps.).

   * Processing of escape sequences inside command-line variable
     assignments (*note Assigning Variables on the Command Line:
     Assignment Options.).


File: gawk.info,  Node: POSIX,  Next: BTL,  Prev: SVR4,  Up: Language History

Changes Between SVR4 and POSIX `awk'
====================================

   The POSIX Command Language and Utilities standard for `awk' (1992)
introduced the following changes into the language:

   * The use of `-W' for implementation-specific options (*note
     Command-Line Options: Options.).

   * The use of `CONVFMT' for controlling the conversion of numbers to
     strings (*note Conversion of Strings and Numbers: Conversion.).

   * The concept of a numeric string and tighter comparison rules to go
     with it (*note Variable Typing and Comparison Expressions: Typing
     and Comparison.).

   * More complete documentation of many of the previously undocumented
     features of the language.

   The following common extensions are not permitted by the POSIX
standard:

   * `\x' escape sequences are not recognized (*note Escape
     Sequences::).

   * Newlines do not act as whitespace to separate fields when `FS' is
     equal to a single space (*note Examining Fields: Fields.).

   * Newlines are not allowed after `?' or `:' (*note Conditional
     Expressions: Conditional Exp.).

   * The synonym `func' for the keyword `function' is not recognized
     (*note Function Definition Syntax: Definition Syntax.).

   * The operators `**' and `**=' cannot be used in place of `^' and
     `^=' (*note Arithmetic Operators: Arithmetic Ops., and *Note
     Assignment Expressions: Assignment Ops).

   * Specifying `-Ft' on the command line does not set the value of
     `FS' to be a single TAB character (*note Specifying How Fields Are
     Separated: Field Separators.).

   * The `fflush' built-in function is not supported (*note
     Input/Output Functions: I/O Functions.).


File: gawk.info,  Node: BTL,  Next: POSIX/GNU,  Prev: POSIX,  Up: Language History

Extensions in the Bell Laboratories `awk'
=========================================

   Brian Kernighan, one of the original designers of Unix `awk', has
made his version available via his home page (*note Other Freely
Available `awk' Implementations: Other Versions.).  This minor node
describes extensions in his version of `awk' that are not in POSIX
`awk':

   * The `-mf N' and `-mr N' command-line options to set the maximum
     number of fields and the maximum record size, respectively (*note
     Command-Line Options: Options.).  As a side note, his `awk' no
     longer needs these options; it continues to accept them to avoid
     breaking old programs.

   * The `fflush' built-in function for flushing buffered output (*note
     Input/Output Functions: I/O Functions.).

   * The `**' and `**=' operators (*note Arithmetic Operators:
     Arithmetic Ops.  and *Note Assignment Expressions: Assignment Ops).

   * The use of `func' as an abbreviation for `function' (*note
     Function Definition Syntax: Definition Syntax.).


   The Bell Laboratories `awk' also incorporates the following
extensions, originally developed for `gawk':

   * The `\x' escape sequence (*note Escape Sequences::).

   * The `/dev/stdin', `/dev/stdout', and `/dev/stderr' special files
     (*note Special File Names in `gawk': Special Files.).

   * The ability for `FS' and for the third argument to `split' to be
     null strings (*note Making Each Character a Separate Field: Single
     Character Fields.).

   * The `nextfile' statement (*note Using `gawk''s `nextfile'
     Statement: Nextfile Statement.).

   * The ability to delete all of an array at once with `delete ARRAY'
     (*note The `delete' Statement: Delete.).


File: gawk.info,  Node: POSIX/GNU,  Next: Contributors,  Prev: BTL,  Up: Language History

Extensions in `gawk' Not in POSIX `awk'
=======================================

   The GNU implementation, `gawk', adds a large number of features.
This minor node lists them in the order they were added to `gawk'.
They can all be disabled with either the `--traditional' or `--posix'
options (*note Command-Line Options: Options.).

   Version 2.10 of `gawk' introduced the following features:

   * The `AWKPATH' environment variable for specifying a path search for
     the `-f' command-line option (*note Command-Line Options:
     Options.).

   * The `IGNORECASE' variable and its effects (*note Case Sensitivity
     in Matching: Case-sensitivity.).

   * The `/dev/stdin', `/dev/stdout', `/dev/stderr' and `/dev/fd/N'
     special file names (*note Special File Names in `gawk': Special
     Files.).

   Version 2.13 of `gawk' introduced the following features:

   * The `FIELDWIDTHS' variable and its effects (*note Reading
     Fixed-Width Data: Constant Size.).

   * The `systime' and `strftime' built-in functions for obtaining and
     printing timestamps (*note Using `gawk''s Timestamp Functions:
     Time Functions.).

   * The `-W lint' option to provide error and portability checking for
     both the source code and at runtime (*note Command-Line Options:
     Options.).

   * The `-W compat' option to turn off the GNU extensions (*note
     Command-Line Options: Options.).

   * The `-W posix' option for full POSIX compliance (*note
     Command-Line Options: Options.).

   Version 2.14 of `gawk' introduced the following feature:

   * The `next file' statement for skipping to the next data file
     (*note Using `gawk''s `nextfile' Statement: Nextfile Statement.).

   Version 2.15 of `gawk' introduced the following features:

   * The `ARGIND' variable, which tracks the movement of `FILENAME'
     through `ARGV'  (*note Built-in Variables::).

   * The `ERRNO' variable, which contains the system error message when
     `getline' returns -1 or `close' fails (*note Built-in Variables::).

   * The `/dev/pid', `/dev/ppid', `/dev/pgrpid', and `/dev/user' file
     name interpretation (*note Special File Names in `gawk': Special
     Files.).

   * The ability to delete all of an array at once with `delete ARRAY'
     (*note The `delete' Statement: Delete.).

   * The ability to use GNU-style long-named options that start with
     `--' (*note Command-Line Options: Options.).

   * The `--source' option for mixing command-line and library-file
     source code (*note Command-Line Options: Options.).

   Version 3.0 of `gawk' introduced the following features:

   * `IGNORECASE' changed, now applying to string comparison as well as
     regexp operations (*note Case Sensitivity in Matching:
     Case-sensitivity.).

   * The `RT' variable that contains the input text that matched `RS'
     (*note How Input Is Split into Records: Records.).

   * Full support for both POSIX and GNU regexps (*note Regular
     Expressions: Regexp.).

   * The `gensub' function for more powerful text manipulation (*note
     String Manipulation Functions: String Functions.).

   * The `strftime' function acquired a default time format, allowing
     it to be called with no arguments (*note Using `gawk''s Timestamp
     Functions: Time Functions.).

   * The ability for `FS' and for the third argument to `split' to be
     null strings (*note Making Each Character a Separate Field: Single
     Character Fields.).

   * The ability for `RS' to be a regexp (*note How Input Is Split into
     Records: Records.).

   * The `next file' statement became `nextfile' (*note Using `gawk''s
     `nextfile' Statement: Nextfile Statement.).

   * The `--lint-old' option to warn about constructs that are not
     available in the original Version 7 Unix version of `awk' (*note
     Major Changes Between V7 and SVR3.1: V7/SVR3.1.).

   * The `-m' option and the `fflush' function from the Bell
     Laboratories research version of `awk' (*note Command-Line
     Options: Options.; also *note Input/Output Functions: I/O
     Functions.).

   * The `--re-interval' option to provide interval expressions in
     regexps (*note Regular Expression Operators: Regexp Operators.).

   * The `--traditional' option was added as a better name for
     `--compat' (*note Command-Line Options: Options.).

   * The use of GNU Autoconf to control the configuration process
     (*note Compiling `gawk' for Unix: Quick Installation.).

   * Amiga support (*note Installing `gawk' on an Amiga: Amiga
     Installation.).


   Version 3.1 of `gawk' introduced the following features:

   * The `BINMODE' special variable for non-POSIX systems, which allows
     binary I/O for input and/or output files (*note Using `gawk' on PC
     Operating Systems: PC Using.).

   * The `LINT' special variable, which dynamically controls lint
     warnings (*note Built-in Variables::).

   * The `PROCINFO' array for providing process-related information
     (*note Built-in Variables::).

   * The `TEXTDOMAIN' special variable for setting an application's
     internationalization text domain (*note Built-in Variables::, and
     *Note Internationalization with `gawk': Internationalization).

   * The ability to use octal and hexadecimal constants in `awk'
     program source code (*note Octal and Hexadecimal Numbers:
     Nondecimal-numbers.).

   * The `|&' operator for two-way I/O to a coprocess (*note Two-Way
     Communications with Another Process: Two-way I/O.).

   * The `/inet' special files for TCP/IP networking using `|&' (*note
     Using `gawk' for Network Programming: TCP/IP Networking.).

   * The optional second argument to `close' that allows closing one end
     of a two-way pipe to a coprocess (*note Two-Way Communications
     with Another Process: Two-way I/O.).

   * The optional third argument to the `match' function for capturing
     text-matching subexpressions within a regexp (*note String
     Manipulation Functions: String Functions.).

   * Positional specifiers in `printf' formats for making translations
     easier (*note Rearranging `printf' Arguments: Printf Ordering.).

   * The `asort' function for sorting arrays (*note Sorting Array
     Values and Indices with `gawk': Array Sorting.).

   * The `bindtextdomain' and `dcgettext' functions for
     internationalization (*note Internationalizing `awk' Programs:
     Programmer i18n.).

   * The `extension' built-in function and the ability to add new
     built-in functions dynamically (*note Adding New Built-in
     Functions to `gawk': Dynamic Extensions.).

   * The `mktime' built-in function for creating timestamps (*note
     Using `gawk''s Timestamp Functions: Time Functions.).

   * The `and', `or', `xor', `compl', `lshift', `rshift', and
     `strtonum' built-in functions (*note Using `gawk''s Bit
     Manipulation Functions: Bitwise Functions.).

   * The support for `next file' as two words was removed completely
     (*note Using `gawk''s `nextfile' Statement: Nextfile Statement.).

   * The `--dump-variables' option to print a list of all global
     variables (*note Command-Line Options: Options.).

   * The `--gen-po' command-line option and the use of a leading
     underscore to mark strings that should be translated (*note
     Extracting Marked Strings: String Extraction.).

   * The `--non-decimal-data' option to allow non-decimal input data
     (*note Allowing Nondecimal Input Data: Nondecimal Data.).

   * The `--profile' option and `pgawk', the profiling version of
     `gawk', for producing execution profiles of `awk' programs (*note
     Profiling Your `awk' Programs: Profiling.).

   * The `--enable-portals' configuration option to enable special
     treatment of pathnames that begin with `/p' as BSD portals (*note
     Using `gawk' with BSD Portals: Portal Files.).

   * The use of GNU Automake to help in standardizing the configuration
     process (*note Compiling `gawk' for Unix: Quick Installation.).

   * The use of GNU `gettext' for `gawk''s own message output (*note
     `gawk' Can Speak Your Language: Gawk I18N.).

   * BeOS support (*note Installing `gawk' on BeOS: BeOS Installation.).

   * Tandem support (*note Installing `gawk' on a Tandem: Tandem
     Installation.).

   * The Atari port became officially unsupported (*note Installing
     `gawk' on the Atari ST: Atari Installation.).

   * The source code now uses new-style function definitions, with
     `ansi2knr' to convert the code on systems with old compilers.



File: gawk.info,  Node: Contributors,  Prev: POSIX/GNU,  Up: Language History

Major Contributors to `gawk'
============================

     Always give credit where credit is due.
     Anonymous

   This minor node names the major contributors to `gawk' and/or this
Info file, in approximate chronological order:

   * Dr. Alfred V. Aho, Dr. Peter J. Weinberger, and Dr. Brian W.
     Kernighan, all of Bell Laboratories, designed and implemented Unix
     `awk', from which `gawk' gets the majority of its feature set.

   * Paul Rubin did the initial design and implementation in 1986, and
     wrote the first draft (around 40 pages) of this Info file.

   * Jay Fenlason finished the initial implementation.

   * Diane Close revised the first draft of this Info file, bringing it
     to around 90 pages.

   * Richard Stallman helped finish the implementation and the initial
     draft of this Info file.  He is also the founder of the FSF and
     the GNU project.

   * John Woods contributed parts of the code (mostly fixes) in the
     initial version of `gawk'.

   * In 1988, David Trueman took over primary maintenance of `gawk',
     making it compatible with "new" `awk', and greatly improving its
     performance.

   * Pat Rankin provided the VMS port and its documentation.

   * Conrad Kwok, Scott Garfinkle, and Kent Williams did the initial
     ports to MS-DOS with various versions of MSC.

   * Hal Peterson provided help in porting `gawk' to Cray systems.

   * Kai Uwe Rommel provided the initial port to OS/2 and its
     documentation.

   * Michal Jaegermann provided the port to Atari systems and its
     documentation.  He continues to provide portability checking with
     DEC Alpha systems, and has done a lot of work to make sure `gawk'
     works on non-32-bit systems.

   * Fred Fish provided the port to Amiga systems and its documentation.

   * Scott Deifik currently maintains the MS-DOS port.

   * Juan Grigera maintains the port to Win32 systems.

   * Dr. Darrel Hankerson acts as coordinator for the various ports to
     different PC platforms and creates binary distributions for
     various PC operating systems.  He is also instrumental in keeping
     the documentation up to date for the various PC platforms.

   * Christos Zoulas provided the `extension' built-in function for
     dynamically adding new modules.

   * Ju"rgen Kahrs contributed the initial version of the TCP/IP
     networking code and documentation, and motivated the inclusion of
     the `|&' operator.

   * Stephen Davies provided the port to Tandem systems and its
     documentation.

   * Martin Brown provided the port to BeOS and its documentation.

   * Arno Peters did the initial work to convert `gawk' to use GNU
     Automake and `gettext'.

   * Alan J. Broder provided the initial version of the `asort' function
     as well as the code for the new optional third argument to the
     `match' function.

   * Andreas Buening updated the `gawk' port for OS/2.

     Isamu Hasegawa, of IBM in Japan, contributed support for multibyte
     characters.

   * Arnold Robbins has been working on `gawk' since 1988, at first
     helping David Trueman, and as the primary maintainer since around
     1994.


File: gawk.info,  Node: Installation,  Next: Notes,  Prev: Language History,  Up: Top

Installing `gawk'
*****************

   This appendix provides instructions for installing `gawk' on the
various platforms that are supported by the developers.  The primary
developer supports GNU/Linux (and Unix), whereas the other ports are
contributed.  *Note Reporting Problems and Bugs: Bugs, for the
electronic mail addresses of the people who did the respective ports.

* Menu:

* Gawk Distribution::           What is in the `gawk' distribution.
* Unix Installation::           Installing `gawk' under various
                                versions of Unix.
* Non-Unix Installation::       Installation on Other Operating Systems.
* Unsupported::                 Systems whose ports are no longer supported.
* Bugs::                        Reporting Problems and Bugs.
* Other Versions::              Other freely available `awk'
                                implementations.


File: gawk.info,  Node: Gawk Distribution,  Next: Unix Installation,  Prev: Installation,  Up: Installation

The `gawk' Distribution
=======================

   This minor node describes how to get the `gawk' distribution, how to
extract it, and then what is in the various files and subdirectories.

* Menu:

* Getting::                     How to get the distribution.
* Extracting::                  How to extract the distribution.
* Distribution contents::       What is in the distribution.


File: gawk.info,  Node: Getting,  Next: Extracting,  Prev: Gawk Distribution,  Up: Gawk Distribution

Getting the `gawk' Distribution
-------------------------------

   There are three ways to get GNU software:

   * Copy it from someone else who already has it.

   * Order `gawk' directly from the Free Software Foundation.  Software
     distributions are available for Gnu/Linux, Unix, and MS-Windows,
     in several CD packages.  Their address is:

          Free Software Foundation
          59 Temple Place, Suite 330
          Boston, MA  02111-1307 USA
          Phone: +1-617-542-5942
          Fax (including Japan): +1-617-542-2652
          Email: <gnu@gnu.org>
          URL: `http://www.gnu.org'

     Ordering from the FSF directly contributes to the support of the
     foundation and to the production of more free software.

   * Retrieve `gawk' by using anonymous `ftp' to the Internet host
     `ftp.gnu.org', in the directory `/gnu/gawk'.

   The GNU software archive is mirrored around the world.  The
up-to-date list of mirror sites is available from the main FSF web site
(http://www.gnu.org/order/ftp.html).  Try to use one of the mirrors;
they will be less busy, and you can usually find one closer to your
site.


File: gawk.info,  Node: Extracting,  Next: Distribution contents,  Prev: Getting,  Up: Gawk Distribution

Extracting the Distribution
---------------------------

   `gawk' is distributed as a `tar' file compressed with the GNU Zip
program, `gzip'.

   Once you have the distribution (for example, `gawk-3.1.1.tar.gz'),
use `gzip' to expand the file and then use `tar' to extract it.  You
can use the following pipeline to produce the `gawk' distribution:

     # Under System V, add 'o' to the tar options
     gzip -d -c gawk-3.1.1.tar.gz | tar -xvpf -

This creates a directory named `gawk-3.1.1' in the current directory.

   The distribution file name is of the form `gawk-V.R.P.tar.gz'.  The
V represents the major version of `gawk', the R represents the current
release of version V, and the P represents a "patch level", meaning
that minor bugs have been fixed in the release.  The current patch
level is 1, but when retrieving distributions, you should get the
version with the highest version, release, and patch level.  (Note,
however, that patch levels greater than or equal to 80 denote "beta" or
nonproduction software; you might not want to retrieve such a version
unless you don't mind experimenting.)  If you are not on a Unix system,
you need to make other arrangements for getting and extracting the
`gawk' distribution.  You should consult a local expert.


File: gawk.info,  Node: Distribution contents,  Prev: Extracting,  Up: Gawk Distribution

Contents of the `gawk' Distribution
-----------------------------------

   The `gawk' distribution has a number of C source files,
documentation files, subdirectories, and files related to the
configuration process (*note Compiling and Installing `gawk' on Unix:
Unix Installation.), as well as several subdirectories related to
different non-Unix operating systems:

Various `.c', `.y', and `.h' files
     The actual `gawk' source code.

`README'
`README_d/README.*'
     Descriptive files: `README' for `gawk' under Unix and the rest for
     the various hardware and software combinations.

`INSTALL'
     A file providing an overview of the configuration and installation
     process.

`ChangeLog'
     A detailed list of source code changes as bugs are fixed or
     improvements made.

`NEWS'
     A list of changes to `gawk' since the last release or patch.

`COPYING'
     The GNU General Public License.

`FUTURES'
     A brief list of features and changes being contemplated for future
     releases, with some indication of the time frame for the feature,
     based on its difficulty.

`LIMITATIONS'
     A list of those factors that limit `gawk''s performance.  Most of
     these depend on the hardware or operating system software and are
     not limits in `gawk' itself.

`POSIX.STD'
     A description of one area in which the POSIX standard for `awk' is
     incorrect as well as how `gawk' handles the problem.

`doc/awkforai.txt'
     A short article describing why `gawk' is a good language for AI
     (Artificial Intelligence) programming.

`doc/README.card'
`doc/ad.block'
`doc/awkcard.in'
`doc/cardfonts'
`doc/colors'
`doc/macros'
`doc/no.colors'
`doc/setter.outline'
     The `troff' source for a five-color `awk' reference card.  A
     modern version of `troff' such as GNU `troff' (`groff') is needed
     to produce the color version. See the file `README.card' for
     instructions if you have an older `troff'.

`doc/gawk.1'
     The `troff' source for a manual page describing `gawk'.  This is
     distributed for the convenience of Unix users.

`doc/gawk.texi'
     The Texinfo source file for this Info file.  It should be
     processed with TeX to produce a printed document, and with
     `makeinfo' to produce an Info or HTML file.

`doc/gawk.info'
     The generated Info file for this Info file.

`doc/gawkinet.texi'
     The Texinfo source file for *Note Top::.  It should be processed
     with TeX to produce a printed document and with `makeinfo' to
     produce an Info or HTML file.

`doc/gawkinet.info'
     The generated Info file for `TCP/IP Internetworking with `gawk''.

`doc/igawk.1'
     The `troff' source for a manual page describing the `igawk'
     program presented in *Note An Easy Way to Use Library Functions:
     Igawk Program.

`doc/Makefile.in'
     The input file used during the configuration process to generate
     the actual `Makefile' for creating the documentation.

`Makefile.am'
`*/Makefile.am'
     Files used by the GNU `automake' software for generating the
     `Makefile.in' files used by `autoconf' and `configure'.

`Makefile.in'
`acconfig.h'
`acinclude.m4'
`aclocal.m4'
`configh.in'
`configure.in'
`configure'
`custom.h'
`missing_d/*'
`m4/*'
     These files and subdirectories are used when configuring `gawk'
     for various Unix systems.  They are explained in *Note Compiling
     and Installing `gawk' on Unix: Unix Installation.

`intl/*'
`po/*'
     The `intl' directory provides the GNU `gettext' library, which
     implements `gawk''s internationalization features, while the `po'
     library contains message translations.

`awklib/extract.awk'
`awklib/Makefile.am'
`awklib/Makefile.in'
`awklib/eg/*'
     The `awklib' directory contains a copy of `extract.awk' (*note
     Extracting Programs from Texinfo Source Files: Extract Program.),
     which can be used to extract the sample programs from the Texinfo
     source file for this Info file. It also contains a `Makefile.in'
     file, which `configure' uses to generate a `Makefile'.
     `Makefile.am' is used by GNU Automake to create `Makefile.in'.
     The library functions from *Note A Library of `awk' Functions:
     Library Functions, and the `igawk' program from *Note An Easy Way
     to Use Library Functions: Igawk Program, are included as
     ready-to-use files in the `gawk' distribution.  They are installed
     as part of the installation process.  The rest of the programs in
     this Info file are available in appropriate subdirectories of
     `awklib/eg'.

`unsupported/atari/*'
     Files needed for building `gawk' on an Atari ST (*note Installing
     `gawk' on the Atari ST: Atari Installation., for details).

`unsupported/tandem/*'
     Files needed for building `gawk' on a Tandem (*note Installing
     `gawk' on a Tandem: Tandem Installation., for details).

`posix/*'
     Files needed for building `gawk' on POSIX-compliant systems.

`pc/*'
     Files needed for building `gawk' under MS-DOS, MS Windows and OS/2
     (*note Installation on PC Operating Systems: PC Installation., for
     details).

`vms/*'
     Files needed for building `gawk' under VMS (*note How to Compile
     and Install `gawk' on VMS: VMS Installation., for details).

`test/*'
     A test suite for `gawk'.  You can use `make check' from the
     top-level `gawk' directory to run your version of `gawk' against
     the test suite.  If `gawk' successfully passes `make check', then
     you can be confident of a successful port.


File: gawk.info,  Node: Unix Installation,  Next: Non-Unix Installation,  Prev: Gawk Distribution,  Up: Installation

Compiling and Installing `gawk' on Unix
=======================================

   Usually, you can compile and install `gawk' by typing only two
commands.  However, if you use an unusual system, you may need to
configure `gawk' for your system yourself.

* Menu:

* Quick Installation::               Compiling `gawk' under Unix.
* Additional Configuration Options:: Other compile-time options.
* Configuration Philosophy::         How it's all supposed to work.


File: gawk.info,  Node: Quick Installation,  Next: Additional Configuration Options,  Prev: Unix Installation,  Up: Unix Installation

Compiling `gawk' for Unix
-------------------------

   After you have extracted the `gawk' distribution, `cd' to
`gawk-3.1.1'.  Like most GNU software, `gawk' is configured
automatically for your Unix system by running the `configure' program.
This program is a Bourne shell script that is generated automatically
using GNU `autoconf'.  (The `autoconf' software is described fully
starting with *Note Top::.)

   To configure `gawk', simply run `configure':

     sh ./configure

   This produces a `Makefile' and `config.h' tailored to your system.
The `config.h' file describes various facts about your system.  You
might want to edit the `Makefile' to change the `CFLAGS' variable,
which controls the command-line options that are passed to the C
compiler (such as optimization levels or compiling for debugging).

   Alternatively, you can add your own values for most `make' variables
on the command line, such as `CC' and `CFLAGS', when running
`configure':

     CC=cc CFLAGS=-g sh ./configure

See the file `INSTALL' in the `gawk' distribution for all the details.

   After you have run `configure' and possibly edited the `Makefile',
type:

     make

Shortly thereafter, you should have an executable version of `gawk'.
That's all there is to it!  To verify that `gawk' is working properly,
run `make check'.  All of the tests should succeed.  If these steps do
not work, or if any of the tests fail, check the files in the
`README_d' directory to see if you've found a known problem.  If the
failure is not described there, please send in a bug report (*note
Reporting Problems and Bugs: Bugs..)


File: gawk.info,  Node: Additional Configuration Options,  Next: Configuration Philosophy,  Prev: Quick Installation,  Up: Unix Installation

Additional Configuration Options
--------------------------------

   There are several additional options you may use on the `configure'
command line when compiling `gawk' from scratch, including:

`--enable-portals'
     Treat pathnames that begin with `/p' as BSD portal files when
     doing two-way I/O with the `|&' operator (*note Using `gawk' with
     BSD Portals: Portal Files.).

`--with-included-gettext'
     Use the version of the `gettext' library that comes with `gawk'.
     This option should be used on systems that do _not_ use version 2
     (or later) of the GNU C library.  All known modern GNU/Linux
     systems use Glibc 2.  Use this option on any other system.

`--disable-nls'
     Disable all message-translation facilities.  This is usually not
     desirable, but it may bring you some slight performance
     improvement.  You should also use this option if
     `--with-included-gettext' doesn't work on your system.


File: gawk.info,  Node: Configuration Philosophy,  Prev: Additional Configuration Options,  Up: Unix Installation

The Configuration Process
-------------------------

   This minor node is of interest only if you know something about
using the C language and the Unix operating system.

   The source code for `gawk' generally attempts to adhere to formal
standards wherever possible.  This means that `gawk' uses library
routines that are specified by the ISO C standard and by the POSIX
operating system interface standard.  When using an ISO C compiler,
function prototypes are used to help improve the compile-time checking.

   Many Unix systems do not support all of either the ISO or the POSIX
standards.  The `missing_d' subdirectory in the `gawk' distribution
contains replacement versions of those functions that are most likely
to be missing.

   The `config.h' file that `configure' creates contains definitions
that describe features of the particular operating system where you are
attempting to compile `gawk'.  The three things described by this file
are: what header files are available, so that they can be correctly
included, what (supposedly) standard functions are actually available
in your C libraries, and various miscellaneous facts about your variant
of Unix.  For example, there may not be an `st_blksize' element in the
`stat' structure.  In this case, `HAVE_ST_BLKSIZE' is undefined.

   It is possible for your C compiler to lie to `configure'. It may do
so by not exiting with an error when a library function is not
available.  To get around this, edit the file `custom.h'.  Use an
`#ifdef' that is appropriate for your system, and either `#define' any
constants that `configure' should have defined but didn't, or `#undef'
any constants that `configure' defined and should not have.  `custom.h'
is automatically included by `config.h'.

   It is also possible that the `configure' program generated by
`autoconf' will not work on your system in some other fashion.  If you
do have a problem, the file `configure.in' is the input for `autoconf'.
You may be able to change this file and generate a new version of
`configure' that works on your system (*note Reporting Problems and
Bugs: Bugs., for information on how to report problems in configuring
`gawk').  The same mechanism may be used to send in updates to
`configure.in' and/or `custom.h'.


File: gawk.info,  Node: Non-Unix Installation,  Next: Unsupported,  Prev: Unix Installation,  Up: Installation

Installation on Other Operating Systems
=======================================

   This minor node describes how to install `gawk' on various non-Unix
systems.

* Menu:

* Amiga Installation::          Installing `gawk' on an Amiga.
* BeOS Installation::           Installing `gawk' on BeOS.
* PC Installation::             Installing and Compiling `gawk' on
                                MS-DOS and OS/2.
* VMS Installation::            Installing `gawk' on VMS.


File: gawk.info,  Node: Amiga Installation,  Next: BeOS Installation,  Prev: Non-Unix Installation,  Up: Non-Unix Installation

Installing `gawk' on an Amiga
-----------------------------

   You can install `gawk' on an Amiga system using a Unix emulation
environment, available via anonymous `ftp' from `ftp.ninemoons.com' in
the directory `pub/ade/current'.  This includes a shell based on
`pdksh'.  The primary component of this environment is a Unix emulation
library, `ixemul.lib'.

   A more complete distribution for the Amiga is available on the Geek
Gadgets CD-ROM, available from:

     CRONUS
     1840 E. Warner Road #105-265
     Tempe, AZ 85284  USA
     US Toll Free: (800) 804-0833
     Phone: +1-602-491-0442
     FAX: +1-602-491-0048
     Email: <info@ninemoons.com>
     WWW: `http://www.ninemoons.com'
     Anonymous `ftp' site: `ftp.ninemoons.com'

   Once you have the distribution, you can configure `gawk' simply by
running `configure':

     configure -v m68k-amigaos

   Then run `make' and you should be all set!  If these steps do not
work, please send in a bug report (*note Reporting Problems and Bugs:
Bugs.).


File: gawk.info,  Node: BeOS Installation,  Next: PC Installation,  Prev: Amiga Installation,  Up: Non-Unix Installation

Installing `gawk' on BeOS
-------------------------

   Since BeOS DR9, all the tools that you should need to build `gawk'
are included with BeOS. The process is basically identical to the Unix
process of running `configure' and then `make'. Full instructions are
given below.

   You can compile `gawk' under BeOS by extracting the standard sources
and running `configure'. You _must_ specify the location prefix for the
installation directory. For BeOS DR9 and beyond, the best directory to
use is `/boot/home/config', so the `configure' command is:

     configure --prefix=/boot/home/config

   This installs the compiled application into `/boot/home/config/bin',
which is already specified in the standard `PATH'.

   Once the configuration process is completed, you can run `make', and
then `make install':

     $ make
     ...
     $ make install

   BeOS uses `bash' as its shell; thus, you use `gawk' the same way you
would under Unix.  If these steps do not work, please send in a bug
report (*note Reporting Problems and Bugs: Bugs.).


File: gawk.info,  Node: PC Installation,  Next: VMS Installation,  Prev: BeOS Installation,  Up: Non-Unix Installation

Installation on PC Operating Systems
------------------------------------

   This minor node covers installation and usage of `gawk' on x86
machines running DOS, any version of Windows, or OS/2.  In this minor
node, the term "Win32" refers to any of Windows-95/98/ME/NT/2000.

   The limitations of DOS (and DOS shells under Windows or OS/2) has
meant that various "DOS extenders" are often used with programs such as
`gawk'.  The varying capabilities of Microsoft Windows 3.1 and Win32
can add to the confusion.  For an overview of the considerations,
please refer to `README_d/README.pc' in the distribution.

* Menu:

* PC Binary Installation::      Installing a prepared distribution.
* PC Compiling::                Compiling `gawk' for MS-DOS, Win32,
                                and OS/2.
* PC Using::                    Running `gawk' on MS-DOS, Win32 and
                                OS/2.
* Cygwin::                      Building and running `gawk' for
                                Cygwin.


File: gawk.info,  Node: PC Binary Installation,  Next: PC Compiling,  Prev: PC Installation,  Up: PC Installation

Installing a Prepared Distribution for PC Systems
.................................................

   If you have received a binary distribution prepared by the DOS
maintainers, then `gawk' and the necessary support files appear under
the `gnu' directory, with executables in `gnu/bin', libraries in
`gnu/lib/awk', and manual pages under `gnu/man'.  This is designed for
easy installation to a `/gnu' directory on your drive--however, the
files can be installed anywhere provided `AWKPATH' is set properly.
Regardless of the installation directory, the first line of `igawk.cmd'
and `igawk.bat' (in `gnu/bin') may need to be edited.

   The binary distribution contains a separate file describing the
contents. In particular, it may include more than one version of the
`gawk' executable.

   OS/2 (32 bit, EMX) binary distributions are prepared for the `/usr'
directory of your preferred drive. Set `UNIXROOT' to your installation
drive (e.g., `e:') if you want to install `gawk' onto another drive
than the hardcoded default `c:'. Executables appear in `/usr/bin',
libraries under `/usr/share/awk', manual pages under `/usr/man',
Texinfo documentation under `/usr/info' and NLS files under
`/usr/share/locale'.  If you already have a file `/usr/info/dir' from
another package _do not overwrite it!_ Instead enter the following
commands at your prompt (replace `x:' by your installation drive):

     install-info --info-dir=x:/usr/info x:/usr/info/gawk.info
     install-info --info-dir=x:/usr/info x:/usr/info/gawkinet.info

   However, the files can be installed anywhere provided `AWKPATH' is
set properly.

   The binary distribution may contain a separate file containing
additional or more detailed installation instructions.


File: gawk.info,  Node: PC Compiling,  Next: PC Using,  Prev: PC Binary Installation,  Up: PC Installation

Compiling `gawk' for PC Operating Systems
.........................................

   `gawk' can be compiled for MS-DOS, Win32, and OS/2 using the GNU
development tools from DJ Delorie (DJGPP; MS-DOS only) or Eberhard
Mattes (EMX; MS-DOS, Win32 and OS/2).  Microsoft Visual C/C++ can be
used to build a Win32 version, and Microsoft C/C++ can be used to build
16-bit versions for MS-DOS and OS/2.  The file `README_d/README.pc' in
the `gawk' distribution contains additional notes, and `pc/Makefile'
contains important information on compilation options.

   To build `gawk' for MS-DOS, Win32, and OS/2 (16 bit; for 32 bit (EMX)
see below), copy the files in the `pc' directory (_except_ for
`ChangeLog') to the directory with the rest of the `gawk' sources.  The
`Makefile' contains a configuration section with comments and may need
to be edited in order to work with your `make' utility.

   The `Makefile' contains a number of targets for building various
MS-DOS, Win32, and OS/2 versions. A list of targets is printed if the
`make' command is given without a target. As an example, to build `gawk'
using the DJGPP tools, enter `make djgpp'.

   Using `make' to run the standard tests and to install `gawk'
requires additional Unix-like tools, including `sh', `sed', and `cp'.
In order to run the tests, the `test/*.ok' files may need to be
converted so that they have the usual DOS-style end-of-line markers.
Most of the tests work properly with Stewartson's shell along with the
companion utilities or appropriate GNU utilities.  However, some
editing of `test/Makefile' is required. It is recommended that you copy
the file `pc/Makefile.tst' over the file `test/Makefile' as a
replacement. Details can be found in `README_d/README.pc' and in the
file `pc/Makefile.tst'.

   To build `gawk' for OS/2 (32 bit, EMX), there are three
possibilities:

  1. Using the `configure' script included in the official `gawk'
     distribution.  `configure' need not be recreated but a number of
     restrictions exist when using this choice:

        * An external `gettext' library cannot be used. I.e. the
          `configure' option `--without-included-gettext' does not
          work. Unfortunately, the internal `gettext' library is
          seriuosly broken for OS/2.  Therefore you have to use
          `--disable-nls'.

        * Executables must be linked statically (`a.out' format only).
          `make install' does not work.

          These restrictions are due to restrictions in Autoconf 2.13
          and cannot be avoided. They will vanish as soon as `gawk'
          moves on to Autoconf 2.5x.  Now enter the following commands
          at your `sh' prompt:

               $ CC="gcc"; export CC
               $ CFLAGS="-O2"; export CFLAGS
               $ AWK="awk"; export AWK
               $ LD="ld"; export LD
               $ LDFLAGS="-Zexe"; export LDFLAGS
               $ RANLIB="ranlib"; export RANLIB
               $ ac_cv_header_sys_socket_h="yes"
               $ export ac_cv_header_sys_socket_h
               $ ./configure --prefix=c:/usr --disable-nls
               $ make

  2. Using a special version of Autoconf 2.13 for OS/2 to recreate
     `configure'.  Not tested. In principle this should work but the
     same restrictions apply as in 1, but the environment variables
     `CC', `AWK', `LDFLAGS' and `RANLIB' are not necessary.

  3. Using Autoconf 2.5x to recreate `configure' (2.52f or higher
     recommended).  Some patches must be applied to `Makefile.am' and
     `test/Makefile.am' and `po/Makefile.in.in'. Currently not
     supported.

   *Note:* Even if the compiled `gawk.exe' executable contains a DOS
header (`a.out' format), it does _not_ work under DOS. To compile an
executable that runs under DOS, `CPPFLAGS' must be set to
`"-DPIPES_SIMULATED"'.  But then some nonstandard extensions of `gawk'
(e.g., `|&') do not work!

   After compilation the internal tests can be performed. Enter `make
check CMP="diff -a"' at your command prompt. All tests but the `pid'
test are expected to work properly. The `pid' test might or might not
work, no idea why.

   *Note:* Most OS/2 ports of GNU `make' are not able to handle the
Makefiles of this package. If you encounter any problems with `make'
try GNU `make' 3.79.1. You should find the latest version on
`ftp://ftp.unixos2.org'.


File: gawk.info,  Node: PC Using,  Next: Cygwin,  Prev: PC Compiling,  Up: PC Installation

Using `gawk' on PC Operating Systems
....................................

   With the exception of the Cygwin environment, the `|&' operator and
TCP/IP networking (*note Using `gawk' for Network Programming: TCP/IP
Networking.)  are not supported for MS-DOS or MS-Windows. EMX (OS/2
only) does support at least the `|&' operator.

   The OS/2 and MS-DOS versions of `gawk' search for program files as
described in *Note The `AWKPATH' Environment Variable: AWKPATH Variable.
However, semicolons (rather than colons) separate elements in the
`AWKPATH' variable. If `AWKPATH' is not set or is empty, then the
default search path for OS/2 (16 bit) and MS-DOS versions is
`".;c:/lib/awk;c:/gnu/lib/awk"'.

   The search path for OS/2 (32 bit, EMX) is determined by the prefix
directory (most likely `/usr' or `c:/usr') that has been specified as
an option of the `configure' script like it is the case for the Unix
versions.  If `c:/usr' is the prefix directory then the default search
path contains `.' and `c:/usr/share/awk'.  Additionally, to support
binary distributions of `gawk' for OS/2 systems whose drive `c:' might
not support long file names or might not exist at all, there is a
special environment variable. If `UNIXROOT' specifies a drive then this
specific drive is also searched for program files.  E.g., if `UNIXROOT'
is set to `e:' the complete default search path is
`".;c:/usr/share/awk;e:/usr/share/awk"'.

   An `sh'-like shell (as opposed to `command.com' under MS-DOS or
`cmd.exe' under OS/2) may be useful for `awk' programming.  Ian
Stewartson has written an excellent shell for MS-DOS and OS/2, Daisuke
Aoyama has ported GNU `bash' to MS-DOS using the DJGPP tools, and
several shells are available for OS/2, including `ksh'.  The file
`README_d/README.pc' in the `gawk' distribution contains information on
these shells.  Users of Stewartson's shell on DOS should examine its
documentation for handling command lines; in particular, the setting
for `gawk' in the shell configuration may need to be changed and the
`ignoretype' option may also be of interest.

   Under OS/2 and DOS, `gawk' (and many other text programs) silently
translate end-of-line `"\r\n"' to `"\n"' on input and `"\n"' to
`"\r\n"' on output.  A special `BINMODE' variable allows control over
these translations and is interpreted as follows:

   * If `BINMODE' is `"r"', or `(BINMODE & 1)' is nonzero, then binary
     mode is set on read (i.e., no translations on reads).

   * If `BINMODE' is `"w"', or `(BINMODE & 2)' is nonzero, then binary
     mode is set on write (i.e., no translations on writes).

   * If `BINMODE' is `"rw"' or `"wr"', binary mode is set for both read
     and write (same as `(BINMODE & 3)').

   * `BINMODE=NON-NULL-STRING' is the same as `BINMODE=3' (i.e., no
     translations on reads or writes).  However, `gawk' issues a warning
     message if the string is not one of `"rw"' or `"wr"'.

The modes for standard input and standard output are set one time only
(after the command line is read, but before processing any of the `awk'
program).  Setting `BINMODE' for standard input or standard output is
accomplished by using an appropriate `-v BINMODE=N' option on the
command line.  `BINMODE' is set at the time a file or pipe is opened
and cannot be changed mid-stream.

   The name `BINMODE' was chosen to match `mawk' (*note Other Freely
Available `awk' Implementations: Other Versions.).  Both `mawk' and
`gawk' handle `BINMODE' similarly; however, `mawk' adds a `-W
BINMODE=N' option and an environment variable that can set `BINMODE',
`RS', and `ORS'.  The files `binmode[1-3].awk' (under `gnu/lib/awk' in
some of the prepared distributions) have been chosen to match `mawk''s
`-W BINMODE=N' option.  These can be changed or discarded; in
particular, the setting of `RS' giving the fewest "surprises" is open
to debate.  `mawk' uses `RS = "\r\n"' if binary mode is set on read,
which is appropriate for files with the DOS-style end-of-line.

   To illustrate, the following examples set binary mode on writes for
standard output and other files, and set `ORS' as the "usual" DOS-style
end-of-line:

     gawk -v BINMODE=2 -v ORS="\r\n" ...

or:

     gawk -v BINMODE=w -f binmode2.awk ...

These give the same result as the `-W BINMODE=2' option in `mawk'.  The
following changes the record separator to `"\r\n"' and sets binary mode
on reads, but does not affect the mode on standard input:

     gawk -v RS="\r\n" --source "BEGIN { BINMODE = 1 }" ...

or:

     gawk -f binmode1.awk ...

With proper quoting, in the first example the setting of `RS' can be
moved into the `BEGIN' rule.


File: gawk.info,  Node: Cygwin,  Prev: PC Using,  Up: PC Installation

Using `gawk' In The Cygwin Environment
......................................

   `gawk' can be used "out of the box" under Windows if you are using
the Cygwin environment.(1) This environment provides an excellent
simulation of Unix, using the GNU tools, such as `bash', the GNU
Compiler Collection (GCC), GNU Make, and other GNU tools.  Compilation
and installation for Cygwin is the same as for a Unix system:

     tar -xvpzf gawk-3.1.1.tar.gz
     cd gawk-3.1.1
     ./configure
     make

   When compared to GNU/Linux on the same system, the `configure' step
on Cygwin takes considerably longer.  However, it does finish, and then
the `make' proceeds as usual.

   *Note:* The `|&' operator and TCP/IP networking (*note Using `gawk'
for Network Programming: TCP/IP Networking.)  are fully supported in
the Cygwin environment.  This is not true for any other environment for
MS-DOS or MS-Windows.

   ---------- Footnotes ----------

   (1) `http://www.cygwin.com'


File: gawk.info,  Node: VMS Installation,  Prev: PC Installation,  Up: Non-Unix Installation

How to Compile and Install `gawk' on VMS
----------------------------------------

   This node describes how to compile and install `gawk' under VMS.

* Menu:

* VMS Compilation::             How to compile `gawk' under VMS.
* VMS Installation Details::    How to install `gawk' under VMS.
* VMS Running::                 How to run `gawk' under VMS.
* VMS POSIX::                   Alternate instructions for VMS POSIX.


File: gawk.info,  Node: VMS Compilation,  Next: VMS Installation Details,  Prev: VMS Installation,  Up: VMS Installation

Compiling `gawk' on VMS
.......................

   To compile `gawk' under VMS, there is a `DCL' command procedure that
issues all the necessary `CC' and `LINK' commands. There is also a
`Makefile' for use with the `MMS' utility.  From the source directory,
use either:

     $ @[.VMS]VMSBUILD.COM

or:

     $ MMS/DESCRIPTION=[.VMS]DESCRIP.MMS GAWK

   Depending upon which C compiler you are using, follow one of the sets
of instructions in this table:

VAX C V3.x
     Use either `vmsbuild.com' or `descrip.mms' as is.  These use
     `CC/OPTIMIZE=NOLINE', which is essential for Version 3.0.

VAX C V2.x
     You must have Version 2.3 or 2.4; older ones won't work.  Edit
     either `vmsbuild.com' or `descrip.mms' according to the comments
     in them.  For `vmsbuild.com', this just entails removing two `!'
     delimiters.  Also edit `config.h' (which is a copy of file
     `[.config]vms-conf.h') and comment out or delete the two lines
     `#define __STDC__ 0' and `#define VAXC_BUILTINS' near the end.

GNU C
     Edit `vmsbuild.com' or `descrip.mms'; the changes are different
     from those for VAX C V2.x but equally straightforward.  No changes
     to `config.h' are needed.

DEC C
     Edit `vmsbuild.com' or `descrip.mms' according to their comments.
     No changes to `config.h' are needed.

   `gawk' has been tested under VAX/VMS 5.5-1 using VAX C V3.2, and GNU
C 1.40 and 2.3.  It should work without modifications for VMS V4.6 and
up.


File: gawk.info,  Node: VMS Installation Details,  Next: VMS Running,  Prev: VMS Compilation,  Up: VMS Installation

Installing `gawk' on VMS
........................

   To install `gawk', all you need is a "foreign" command, which is a
`DCL' symbol whose value begins with a dollar sign. For example:

     $ GAWK :== $disk1:[gnubin]GAWK

Substitute the actual location of `gawk.exe' for `$disk1:[gnubin]'. The
symbol should be placed in the `login.com' of any user who wants to run
`gawk', so that it is defined every time the user logs on.
Alternatively, the symbol may be placed in the system-wide
`sylogin.com' procedure, which allows all users to run `gawk'.

   Optionally, the help entry can be loaded into a VMS help library:

     $ LIBRARY/HELP SYS$HELP:HELPLIB [.VMS]GAWK.HLP

(You may want to substitute a site-specific help library rather than
the standard VMS library `HELPLIB'.)  After loading the help text, the
command:

     $ HELP GAWK

provides information about both the `gawk' implementation and the `awk'
programming language.

   The logical name `AWK_LIBRARY' can designate a default location for
`awk' program files.  For the `-f' option, if the specified file name
has no device or directory path information in it, `gawk' looks in the
current directory first, then in the directory specified by the
translation of `AWK_LIBRARY' if the file is not found.  If, after
searching in both directories, the file still is not found, `gawk'
appends the suffix `.awk' to the filename and retries the file search.
If `AWK_LIBRARY' is not defined, that portion of the file search fails
benignly.


File: gawk.info,  Node: VMS Running,  Next: VMS POSIX,  Prev: VMS Installation Details,  Up: VMS Installation

Running `gawk' on VMS
.....................

   Command-line parsing and quoting conventions are significantly
different on VMS, so examples in this Info file or from other sources
often need minor changes.  They _are_ minor though, and all `awk'
programs should run correctly.

   Here are a couple of trivial tests:

     $ gawk -- "BEGIN {print ""Hello, World!""}"
     $ gawk -"W" version
     ! could also be -"W version" or "-W version"

Note that uppercase and mixed-case text must be quoted.

   The VMS port of `gawk' includes a `DCL'-style interface in addition
to the original shell-style interface (see the help entry for details).
One side effect of dual command-line parsing is that if there is only a
single parameter (as in the quoted string program above), the command
becomes ambiguous.  To work around this, the normally optional `--'
flag is required to force Unix style rather than `DCL' parsing.  If any
other dash-type options (or multiple parameters such as data files to
process) are present, there is no ambiguity and `--' can be omitted.

   The default search path, when looking for `awk' program files
specified by the `-f' option, is `"SYS$DISK:[],AWK_LIBRARY:"'.  The
logical name `AWKPATH' can be used to override this default.  The format
of `AWKPATH' is a comma-separated list of directory specifications.
When defining it, the value should be quoted so that it retains a single
translation and not a multitranslation `RMS' searchlist.


File: gawk.info,  Node: VMS POSIX,  Prev: VMS Running,  Up: VMS Installation

Building and Using `gawk' on VMS POSIX
......................................

   Ignore the instructions above, although `vms/gawk.hlp' should still
be made available in a help library.  The source tree should be unpacked
into a container file subsystem rather than into the ordinary VMS
filesystem.  Make sure that the two scripts, `configure' and
`vms/posix-cc.sh', are executable; use `chmod +x' on them if necessary.
Then execute the following two commands:

     psx> CC=vms/posix-cc.sh configure
     psx> make CC=c89 gawk

The first command constructs files `config.h' and `Makefile' out of
templates, using a script to make the C compiler fit `configure''s
expectations.  The second command compiles and links `gawk' using the C
compiler directly; ignore any warnings from `make' about being unable
to redefine `CC'.  `configure' takes a very long time to execute, but
at least it provides incremental feedback as it runs.

   This has been tested with VAX/VMS V6.2, VMS POSIX V2.0, and DEC C
V5.2.

   Once built, `gawk' works like any other shell utility.  Unlike the
normal VMS port of `gawk', no special command-line manipulation is
needed in the VMS POSIX environment.


File: gawk.info,  Node: Unsupported,  Next: Bugs,  Prev: Non-Unix Installation,  Up: Installation

Unsupported Operating System Ports
==================================

   This sections describes systems for which the `gawk' port is no
longer supported.

* Menu:

* Atari Installation::          Installing `gawk' on the Atari ST.
* Tandem Installation::         Installing `gawk' on a Tandem.


File: gawk.info,  Node: Atari Installation,  Next: Tandem Installation,  Prev: Unsupported,  Up: Unsupported

Installing `gawk' on the Atari ST
---------------------------------

   The Atari port is no longer supported.  It is included for those who
might want to use it but it is no longer being actively maintained.

   There are no substantial differences when installing `gawk' on
various Atari models.  Compiled `gawk' executables do not require a
large amount of memory with most `awk' programs, and should run on all
Motorola processor-based models (called further ST, even if that is not
exactly right).

   In order to use `gawk', you need to have a shell, either text or
graphics, that does not map all the characters of a command line to
uppercase.  Maintaining case distinction in option flags is very
important (*note Command-Line Options: Options.).  These days this is
the default and it may only be a problem for some very old machines.
If your system does not preserve the case of option flags, you need to
upgrade your tools.  Support for I/O redirection is necessary to make
it easy to import `awk' programs from other environments.  Pipes are
nice to have but not vital.

* Menu:

* Atari Compiling::             Compiling `gawk' on Atari.
* Atari Using::                 Running `gawk' on Atari.


File: gawk.info,  Node: Atari Compiling,  Next: Atari Using,  Prev: Atari Installation,  Up: Atari Installation

Compiling `gawk' on the Atari ST
................................

   A proper compilation of `gawk' sources when `sizeof(int)' differs
from `sizeof(void *)' requires an ISO C compiler. An initial port was
done with `gcc'.  You may actually prefer executables where `int's are
four bytes wide but the other variant works as well.

   You may need quite a bit of memory when trying to recompile the
`gawk' sources, as some source files (`regex.c' in particular) are quite
big.  If you run out of memory compiling such a file, try reducing the
optimization level for this particular file, which may help.

   With a reasonable shell (`bash' will do), you have a pretty good
chance that the `configure' utility will succeed, and in particular if
you run GNU/Linux, MiNT or a similar operating system.  Otherwise
sample versions of `config.h' and `Makefile.st' are given in the
`atari' subdirectory and can be edited and copied to the corresponding
files in the main source directory.  Even if `configure' produces
something, it might be advisable to compare its results with the sample
versions and possibly make adjustments.

   Some `gawk' source code fragments depend on a preprocessor define
`atarist'.  This basically assumes the TOS environment with `gcc'.
Modify these sections as appropriate if they are not right for your
environment.  Also see the remarks about `AWKPATH' and `envsep' in
*Note Running `gawk' on the Atari ST: Atari Using.

   As shipped, the sample `config.h' claims that the `system' function
is missing from the libraries, which is not true, and an alternative
implementation of this function is provided in
`unsupported/atari/system.c'.  Depending upon your particular
combination of shell and operating system, you might want to change the
file to indicate that `system' is available.


File: gawk.info,  Node: Atari Using,  Prev: Atari Compiling,  Up: Atari Installation

Running `gawk' on the Atari ST
..............................

   An executable version of `gawk' should be placed, as usual, anywhere
in your `PATH' where your shell can find it.

   While executing, the Atari version of `gawk' creates a number of
temporary files.  When using `gcc' libraries for TOS, `gawk' looks for
either of the environment variables, `TEMP' or `TMPDIR', in that order.
If either one is found, its value is assumed to be a directory for
temporary files.  This directory must exist, and if you can spare the
memory, it is a good idea to put it on a RAM drive.  If neither `TEMP'
nor `TMPDIR' are found, then `gawk' uses the current directory for its
temporary files.

   The ST version of `gawk' searches for its program files, as
described in *Note The `AWKPATH' Environment Variable: AWKPATH Variable.
The default value for the `AWKPATH' variable is taken from `DEFPATH'
defined in `Makefile'. The sample `gcc'/TOS `Makefile' for the ST in
the distribution sets `DEFPATH' to `".,c:\lib\awk,c:\gnu\lib\awk"'.
The search path can be modified by explicitly setting `AWKPATH' to
whatever you want.  Note that colons cannot be used on the ST to
separate elements in the `AWKPATH' variable, since they have another
reserved meaning.  Instead, you must use a comma to separate elements
in the path.  When recompiling, the separating character can be
modified by initializing the `envsep' variable in
`unsupported/atari/gawkmisc.atr' to another value.

   Although `awk' allows great flexibility in doing I/O redirections
from within a program, this facility should be used with care on the ST
running under TOS.  In some circumstances, the OS routines for
file-handle pool processing lose track of certain events, causing the
computer to crash and requiring a reboot.  Often a warm reboot is
sufficient.  Fortunately, this happens infrequently and in rather
esoteric situations.  In particular, avoid having one part of an `awk'
program using `print' statements explicitly redirected to
`/dev/stdout', while other `print' statements use the default standard
output, and a calling shell has redirected standard output to a file.

   When `gawk' is compiled with the ST version of `gcc' and its usual
libraries, it accepts both `/' and `\' as path separators.  While this
is convenient, it should be remembered that this removes one
technically valid character (`/') from your file name.  It may also
create problems for external programs called via the `system' function,
which may not support this convention.  Whenever it is possible that a
file created by `gawk' will be used by some other program, use only
backslashes.  Also remember that in `awk', backslashes in strings have
to be doubled in order to get literal backslashes (*note Escape
Sequences::).


File: gawk.info,  Node: Tandem Installation,  Prev: Atari Installation,  Up: Unsupported

Installing `gawk' on a Tandem
-----------------------------

   The Tandem port is only minimally supported.  The port's contributor
no longer has access to a Tandem system.

   The Tandem port was done on a Cyclone machine running D20.  The port
is pretty clean and all facilities seem to work except for the I/O
piping facilities (*note Using `getline' from a Pipe: Getline/Pipe.,
*Note Using `getline' into a Variable from a Pipe:
Getline/Variable/Pipe, and *Note Redirecting Output of `print' and
`printf': Redirection), which is just too foreign a concept for Tandem.

   To build a Tandem executable from source, download all of the files
so that the file names on the Tandem box conform to the restrictions of
D20.  For example, `array.c' becomes `ARRAYC', and `awk.h' becomes
`AWKH'.  The totally Tandem-specific files are in the `tandem'
"subvolume" (`unsupported/tandem' in the `gawk' distribution) and
should be copied to the main source directory before building `gawk'.

   The file `compit' can then be used to compile and bind an executable.
Alas, there is no `configure' or `make'.

   Usage is the same as for Unix, except that D20 requires all `{' and
`}' characters to be escaped with `~' on the command line (but _not_ in
script files). Also, the standard Tandem syntax for `/in filename,out
filename/' must be used instead of the usual Unix `<' and `>' for file
redirection.  (Redirection options on `getline', `print' etc., are
supported.)

   The `-mr VAL' option (*note Command-Line Options: Options.)  has
been "stolen" to enable Tandem users to process fixed-length records
with no "end-of-line" character. That is, `-mr 74' tells `gawk' to read
the input file as fixed 74-byte records.


File: gawk.info,  Node: Bugs,  Next: Other Versions,  Prev: Unsupported,  Up: Installation

Reporting Problems and Bugs
===========================

     There is nothing more dangerous than a bored archeologist.
     The Hitchhiker's Guide to the Galaxy

   If you have problems with `gawk' or think that you have found a bug,
please report it to the developers; we cannot promise to do anything
but we might well want to fix it.

   Before reporting a bug, make sure you have actually found a real bug.
Carefully reread the documentation and see if it really says you can do
what you're trying to do.  If it's not clear whether you should be able
to do something or not, report that too; it's a bug in the
documentation!

   Before reporting a bug or trying to fix it yourself, try to isolate
it to the smallest possible `awk' program and input data file that
reproduces the problem.  Then send us the program and data file, some
idea of what kind of Unix system you're using, the compiler you used to
compile `gawk', and the exact results `gawk' gave you.  Also say what
you expected to occur; this helps us decide whether the problem is
really in the documentation.

   Once you have a precise problem, send email to <bug-gawk@gnu.org>.

   Please include the version number of `gawk' you are using.  You can
get this information with the command `gawk --version'.  Using this
address automatically sends a carbon copy of your mail to me.  If
necessary, I can be reached directly at <arnold@gnu.org>.  The bug
reporting address is preferred since the email list is archived at the
GNU Project.  _All email should be in English, since that is my native
language._

   *Caution:* Do _not_ try to report bugs in `gawk' by posting to the
Usenet/Internet newsgroup `comp.lang.awk'.  While the `gawk' developers
do occasionally read this newsgroup, there is no guarantee that we will
see your posting.  The steps described above are the official
recognized ways for reporting bugs.

   Non-bug suggestions are always welcome as well.  If you have
questions about things that are unclear in the documentation or are
just obscure features, ask me; I will try to help you out, although I
may not have the time to fix the problem.  You can send me electronic
mail at the Internet address noted previously.

   If you find bugs in one of the non-Unix ports of `gawk', please send
an electronic mail message to the person who maintains that port.  They
are named in the following list, as well as in the `README' file in the
`gawk' distribution.  Information in the `README' file should be
considered authoritative if it conflicts with this Info file.

   The people maintaining the non-Unix ports of `gawk' are as follows:

Amiga        Fred Fish, <fnf@ninemoons.com>.
BeOS         Martin Brown, <mc@whoever.com>.
MS-DOS       Scott Deifik, <scottd@amgen.com> and Darrel
             Hankerson, <hankedr@mail.auburn.edu>.
MS-Windows   Juan Grigera, <juan@biophnet.unlp.edu.ar>.
OS/2         The Unix for OS/2 team,
             <gawk-maintainer@unixos2.org>.
Tandem       Stephen Davies, <scldad@sdc.com.au>.
VMS          Pat Rankin, <rankin@eql.caltech.edu>.

   If your bug is also reproducible under Unix, please send a copy of
your report to the <bug-gawk@gnu.org> email list as well.


File: gawk.info,  Node: Other Versions,  Prev: Bugs,  Up: Installation

Other Freely Available `awk' Implementations
============================================

     It's kind of fun to put comments like this in your awk code.
     `// Do C++ comments work? answer: yes! of course'
     Michael Brennan

   There are three other freely available `awk' implementations.  This
minor node briefly describes where to get them:

Unix `awk'
     Brian Kernighan has made his implementation of `awk' freely
     available.  You can retrieve this version via the World Wide Web
     from his home page.(1) It is available in several archive formats:

    Shell archive
          `http://cm.bell-labs.com/who/bwk/awk.shar'

    Compressed `tar' file
          `http://cm.bell-labs.com/who/bwk/awk.tar.gz'

    Zip file
          `http://cm.bell-labs.com/who/bwk/awk.zip'

     This version requires an ISO C (1990 standard) compiler; the C
     compiler from GCC (the GNU Compiler Collection) works quite nicely.

     *Note Extensions in the Bell Laboratories `awk': BTL, for a list
     of extensions in this `awk' that are not in POSIX `awk'.

`mawk'
     Michael Brennan has written an independent implementation of `awk',
     called `mawk'.  It is available under the GPL (*note GNU General
     Public License: Copying.), just as `gawk' is.

     You can get it via anonymous `ftp' to the host `ftp.whidbey.net'.
     Change directory to `/pub/brennan'.  Use "binary" or "image" mode,
     and retrieve `mawk1.3.3.tar.gz' (or the latest version that is
     there).

     `gunzip' may be used to decompress this file. Installation is
     similar to `gawk''s (*note Compiling and Installing `gawk' on
     Unix: Unix Installation.).

     `mawk' has the following extensions that are not in POSIX `awk':

        * The `fflush' built-in function for flushing buffered output
          (*note Input/Output Functions: I/O Functions.).

        * The `**' and `**=' operators (*note Arithmetic Operators:
          Arithmetic Ops.  and also see *Note Assignment Expressions:
          Assignment Ops).

        * The use of `func' as an abbreviation for `function' (*note
          Function Definition Syntax: Definition Syntax.).

        * The `\x' escape sequence (*note Escape Sequences::).

        * The `/dev/stdout', and `/dev/stderr' special files (*note
          Special File Names in `gawk': Special Files.).  Use `"-"'
          instead of `"/dev/stdin"' with `mawk'.

        * The ability for `FS' and for the third argument to `split' to
          be null strings (*note Making Each Character a Separate
          Field: Single Character Fields.).

        * The ability to delete all of an array at once with `delete
          ARRAY' (*note The `delete' Statement: Delete.).

        * The ability for `RS' to be a regexp (*note How Input Is Split
          into Records: Records.).

        * The `BINMODE' special variable for non-Unix operating systems
          (*note Using `gawk' on PC Operating Systems: PC Using.).

     The next version of `mawk' will support `nextfile'.

`awka'
     Written by Andrew Sumner, `awka' translates `awk' programs into C,
     compiles them, and links them with a library of functions that
     provides the core `awk' functionality.  It also has a number of
     extensions.

     The `awk' translator is released under the GPL, and the library is
     under the LGPL.

     To get `awka', go to `http://awka.sourceforge.net'.  You can reach
     Andrew Sumner at <andrew_sumner@bigfoot.com>.

   ---------- Footnotes ----------

   (1) `http://cm.bell-labs.com/who/bwk'


File: gawk.info,  Node: Notes,  Next: Basic Concepts,  Prev: Installation,  Up: Top

Implementation Notes
********************

   This appendix contains information mainly of interest to
implementors and maintainers of `gawk'.  Everything in it applies
specifically to `gawk' and not to other implementations.

* Menu:

* Compatibility Mode::          How to disable certain `gawk'
                                extensions.
* Additions::                   Making Additions To `gawk'.
* Dynamic Extensions::          Adding new built-in functions to
                                `gawk'.
* Future Extensions::           New features that may be implemented one day.


File: gawk.info,  Node: Compatibility Mode,  Next: Additions,  Prev: Notes,  Up: Notes

Downward Compatibility and Debugging
====================================

   *Note Extensions in `gawk' Not in POSIX `awk': POSIX/GNU, for a
summary of the GNU extensions to the `awk' language and program.  All
of these features can be turned off by invoking `gawk' with the
`--traditional' option or with the `--posix' option.

   If `gawk' is compiled for debugging with `-DDEBUG', then there is
one more option available on the command line:

`-W parsedebug'
`--parsedebug'
     Prints out the parse stack information as the program is being
     parsed.

   This option is intended only for serious `gawk' developers and not
for the casual user.  It probably has not even been compiled into your
version of `gawk', since it slows down execution.


File: gawk.info,  Node: Additions,  Next: Dynamic Extensions,  Prev: Compatibility Mode,  Up: Notes

Making Additions to `gawk'
==========================

   If you find that you want to enhance `gawk' in a significant
fashion, you are perfectly free to do so.  That is the point of having
free software; the source code is available and you are free to change
it as you want (*note GNU General Public License: Copying.).

   This minor node discusses the ways you might want to change `gawk'
as well as any considerations you should bear in mind.

* Menu:

* Adding Code::                 Adding code to the main body of
                                `gawk'.
* New Ports::                   Porting `gawk' to a new operating
                                system.


File: gawk.info,  Node: Adding Code,  Next: New Ports,  Prev: Additions,  Up: Additions

Adding New Features
-------------------

   You are free to add any new features you like to `gawk'.  However,
if you want your changes to be incorporated into the `gawk'
distribution, there are several steps that you need to take in order to
make it possible for me to include your changes:

  1. Before building the new feature into `gawk' itself, consider
     writing it as an extension module (*note Adding New Built-in
     Functions to `gawk': Dynamic Extensions.).  If that's not
     possible, continue with the rest of the steps in this list.

  2. Get the latest version.  It is much easier for me to integrate
     changes if they are relative to the most recent distributed
     version of `gawk'.  If your version of `gawk' is very old, I may
     not be able to integrate them at all.  (*Note Getting the `gawk'
     Distribution: Getting, for information on getting the latest
     version of `gawk'.)

  3. See *note (Version)Top:: standards, GNU Coding Standards.  This
     document describes how GNU software should be written. If you
     haven't read it, please do so, preferably _before_ starting to
     modify `gawk'.  (The `GNU Coding Standards' are available from the
     GNU Project's `ftp' site, at
     `ftp://ftp.gnu.org/gnu/GNUInfo/standards.text'.  Texinfo, Info,
     and DVI versions are also available.)

  4. Use the `gawk' coding style.  The C code for `gawk' follows the
     instructions in the `GNU Coding Standards', with minor exceptions.
     The code is formatted using the traditional "K&R" style,
     particularly as regards to the placement of braces and the use of
     tabs.  In brief, the coding rules for `gawk' are as follows:

        * Use ANSI/ISO style (prototype) function headers when defining
          functions.

        * Put the name of the function at the beginning of its own line.

        * Put the return type of the function, even if it is `int', on
          the line above the line with the name and arguments of the
          function.

        * Put spaces around parentheses used in control structures
          (`if', `while', `for', `do', `switch', and `return').

        * Do not put spaces in front of parentheses used in function
          calls.

        * Put spaces around all C operators and after commas in
          function calls.

        * Do not use the comma operator to produce multiple side
          effects, except in `for' loop initialization and increment
          parts, and in macro bodies.

        * Use real tabs for indenting, not spaces.

        * Use the "K&R" brace layout style.

        * Use comparisons against `NULL' and `'\0'' in the conditions of
          `if', `while', and `for' statements, as well as in the `case's
          of `switch' statements, instead of just the plain pointer or
          character value.

        * Use the `TRUE', `FALSE' and `NULL' symbolic constants and the
          character constant `'\0'' where appropriate, instead of `1'
          and `0'.

        * Use the `ISALPHA', `ISDIGIT', etc. macros, instead of the
          traditional lowercase versions; these macros are better
          behaved for non-ASCII character sets.

        * Provide one-line descriptive comments for each function.

        * Do not use `#elif'. Many older Unix C compilers cannot handle
          it.

        * Do not use the `alloca' function for allocating memory off
          the stack.  Its use causes more portability trouble than is
          worth the minor benefit of not having to free the storage.
          Instead, use `malloc' and `free'.

     *Note:* If I have to reformat your code to follow the coding style
     used in `gawk', I may not bother to integrate your changes at all.

  5. Be prepared to sign the appropriate paperwork.  In order for the
     FSF to distribute your changes, you must either place those
     changes in the public domain and submit a signed statement to that
     effect, or assign the copyright in your changes to the FSF.  Both
     of these actions are easy to do and _many_ people have done so
     already. If you have questions, please contact me (*note Reporting
     Problems and Bugs: Bugs.), or <gnu@gnu.org>.

  6. Update the documentation.  Along with your new code, please supply
     new sections and/or chapters for this Info file.  If at all
     possible, please use real Texinfo, instead of just supplying
     unformatted ASCII text (although even that is better than no
     documentation at all).  Conventions to be followed in `GAWK:
     Effective AWK Programming' are provided after the `@bye' at the
     end of the Texinfo source file.  If possible, please update the
     `man' page as well.

     You will also have to sign paperwork for your documentation
     changes.

  7. Submit changes as context diffs or unified diffs.  Use `diff -c -r
     -N' or `diff -u -r -N' to compare the original `gawk' source tree
     with your version.  (I find context diffs to be more readable but
     unified diffs are more compact.)  I recommend using the GNU
     version of `diff'.  Send the output produced by either run of
     `diff' to me when you submit your changes.  (*Note Reporting
     Problems and Bugs: Bugs, for the electronic mail information.)

     Using this format makes it easy for me to apply your changes to the
     master version of the `gawk' source code (using `patch').  If I
     have to apply the changes manually, using a text editor, I may not
     do so, particularly if there are lots of changes.

  8. Include an entry for the `ChangeLog' file with your submission.
     This helps further minimize the amount of work I have to do,
     making it easier for me to accept patches.

   Although this sounds like a lot of work, please remember that while
you may write the new code, I have to maintain it and support it. If it
isn't possible for me to do that with a minimum of extra work, then I
probably will not.


File: gawk.info,  Node: New Ports,  Prev: Adding Code,  Up: Additions

Porting `gawk' to a New Operating System
----------------------------------------

   If you want to port `gawk' to a new operating system, there are
several steps:

  1. Follow the guidelines in *Note Adding New Features: Adding Code,
     concerning coding style, submission of diffs, and so on.

  2. When doing a port, bear in mind that your code must coexist
     peacefully with the rest of `gawk' and the other ports. Avoid
     gratuitous changes to the system-independent parts of the code. If
     at all possible, avoid sprinkling `#ifdef's just for your port
     throughout the code.

     If the changes needed for a particular system affect too much of
     the code, I probably will not accept them.  In such a case, you
     can, of course, distribute your changes on your own, as long as
     you comply with the GPL (*note GNU General Public License:
     Copying.).

  3. A number of the files that come with `gawk' are maintained by other
     people at the Free Software Foundation.  Thus, you should not
     change them unless it is for a very good reason; i.e., changes are
     not out of the question, but changes to these files are
     scrutinized extra carefully.  The files are `getopt.h', `getopt.c',
     `getopt1.c', `regex.h', `regex.c', `dfa.h', `dfa.c', `install-sh',
     and `mkinstalldirs'.

  4. Be willing to continue to maintain the port.  Non-Unix operating
     systems are supported by volunteers who maintain the code needed
     to compile and run `gawk' on their systems. If noone volunteers to
     maintain a port, it becomes unsupported and it may be necessary to
     remove it from the distribution.

  5. Supply an appropriate `gawkmisc.???' file.  Each port has its own
     `gawkmisc.???' that implements certain operating system specific
     functions. This is cleaner than a plethora of `#ifdef's scattered
     throughout the code.  The `gawkmisc.c' in the main source
     directory includes the appropriate `gawkmisc.???' file from each
     subdirectory.  Be sure to update it as well.

     Each port's `gawkmisc.???' file has a suffix reminiscent of the
     machine or operating system for the port--for example,
     `pc/gawkmisc.pc' and `vms/gawkmisc.vms'. The use of separate
     suffixes, instead of plain `gawkmisc.c', makes it possible to move
     files from a port's subdirectory into the main subdirectory,
     without accidentally destroying the real `gawkmisc.c' file.
     (Currently, this is only an issue for the PC operating system
     ports.)

  6. Supply a `Makefile' as well as any other C source and header files
     that are necessary for your operating system.  All your code
     should be in a separate subdirectory, with a name that is the same
     as, or reminiscent of, either your operating system or the
     computer system.  If possible, try to structure things so that it
     is not necessary to move files out of the subdirectory into the
     main source directory.  If that is not possible, then be sure to
     avoid using names for your files that duplicate the names of files
     in the main source directory.

  7. Update the documentation.  Please write a section (or sections)
     for this Info file describing the installation and compilation
     steps needed to compile and/or install `gawk' for your system.

  8. Be prepared to sign the appropriate paperwork.  In order for the
     FSF to distribute your code, you must either place your code in
     the public domain and submit a signed statement to that effect, or
     assign the copyright in your code to the FSF.  Both of these
     actions are easy to do and _many_ people have done so already. If
     you have questions, please contact me, or <gnu@gnu.org>.

   Following these steps makes it much easier to integrate your changes
into `gawk' and have them coexist happily with other operating systems'
code that is already there.

   In the code that you supply and maintain, feel free to use a coding
style and brace layout that suits your taste.


File: gawk.info,  Node: Dynamic Extensions,  Next: Future Extensions,  Prev: Additions,  Up: Notes

Adding New Built-in Functions to `gawk'
=======================================

     Danger Will Robinson!  Danger!!
     Warning! Warning!
     The Robot

   Beginning with `gawk' 3.1, it is possible to add new built-in
functions to `gawk' using dynamically loaded libraries. This facility
is available on systems (such as GNU/Linux) that support the `dlopen'
and `dlsym' functions.  This minor node describes how to write and use
dynamically loaded extentions for `gawk'.  Experience with programming
in C or C++ is necessary when reading this minor node.

   *Caution:* The facilities described in this minor node are very much
subject to change in the next `gawk' release.  Be aware that you may
have to re-do everything, perhaps from scratch, upon the next release.

* Menu:

* Internals::                   A brief look at some `gawk' internals.
* Sample Library::              A example of new functions.


File: gawk.info,  Node: Internals,  Next: Sample Library,  Prev: Dynamic Extensions,  Up: Dynamic Extensions

A Minimal Introduction to `gawk' Internals
------------------------------------------

   The truth is that `gawk' was not designed for simple extensibility.
The facilities for adding functions using shared libraries work, but
are something of a "bag on the side."  Thus, this tour is brief and
simplistic; would-be `gawk' hackers are encouraged to spend some time
reading the source code before trying to write extensions based on the
material presented here.  Of particular note are the files `awk.h',
`builtin.c', and `eval.c'.  Reading `awk.y' in order to see how the
parse tree is built would also be of use.

   With the disclaimers out of the way, the following types, structure
members, functions, and macros are declared in `awk.h' and are of use
when writing extensions.  The next minor node shows how they are used:

`AWKNUM'
     An `AWKNUM' is the internal type of `awk' floating-point numbers.
     Typically, it is a C `double'.

`NODE'
     Just about everything is done using objects of type `NODE'.  These
     contain both strings and numbers, as well as variables and arrays.

`AWKNUM force_number(NODE *n)'
     This macro forces a value to be numeric. It returns the actual
     numeric value contained in the node.  It may end up calling an
     internal `gawk' function.

`void force_string(NODE *n)'
     This macro guarantees that a `NODE''s string value is current.  It
     may end up calling an internal `gawk' function.  It also
     guarantees that the string is zero-terminated.

`n->param_cnt'
     The number of parameters actually passed in a function call at
     runtime.

`n->stptr'
`n->stlen'
     The data and length of a `NODE''s string value, respectively.  The
     string is _not_ guaranteed to be zero-terminated.  If you need to
     pass the string value to a C library function, save the value in
     `n->stptr[n->stlen]', assign `'\0'' to it, call the routine, and
     then restore the value.

`n->type'
     The type of the `NODE'. This is a C `enum'. Values should be
     either `Node_var' or `Node_var_array' for function parameters.

`n->vname'
     The "variable name" of a node.  This is not of much use inside
     externally written extensions.

`void assoc_clear(NODE *n)'
     Clears the associative array pointed to by `n'.  Make sure that
     `n->type == Node_var_array' first.

`NODE **assoc_lookup(NODE *symbol, NODE *subs, int reference)'
     Finds, and installs if necessary, array elements.  `symbol' is the
     array, `subs' is the subscript.  This is usually a value created
     with `tmp_string' (see below).  `reference' should be `TRUE' if it
     is an error to use the value before it is created. Typically,
     `FALSE' is the correct value to use from extension functions.

`NODE *make_string(char *s, size_t len)'
     Take a C string and turn it into a pointer to a `NODE' that can be
     stored appropriately.  This is permanent storage; understanding of
     `gawk' memory management is helpful.

`NODE *make_number(AWKNUM val)'
     Take an `AWKNUM' and turn it into a pointer to a `NODE' that can
     be stored appropriately.  This is permanent storage; understanding
     of `gawk' memory management is helpful.

`NODE *tmp_string(char *s, size_t len);'
     Take a C string and turn it into a pointer to a `NODE' that can be
     stored appropriately.  This is temporary storage; understanding of
     `gawk' memory management is helpful.

`NODE *tmp_number(AWKNUM val)'
     Take an `AWKNUM' and turn it into a pointer to a `NODE' that can
     be stored appropriately.  This is temporary storage; understanding
     of `gawk' memory management is helpful.

`NODE *dupnode(NODE *n)'
     Duplicate a node.  In most cases, this increments an internal
     reference count instead of actually duplicating the entire `NODE';
     understanding of `gawk' memory management is helpful.

`void free_temp(NODE *n)'
     This macro releases the memory associated with a `NODE' allocated
     with `tmp_string' or `tmp_number'.  Understanding of `gawk' memory
     management is helpful.

`void make_builtin(char *name, NODE *(*func)(NODE *), int count)'
     Register a C function pointed to by `func' as new built-in
     function `name'. `name' is a regular C string. `count' is the
     maximum number of arguments that the function takes.  The function
     should be written in the following manner:

          /* do_xxx --- do xxx function for gawk */
          
          NODE *
          do_xxx(NODE *tree)
          {
              ...
          }

`NODE *get_argument(NODE *tree, int i)'
     This function is called from within a C extension function to get
     the `i'-th argument from the function call.  The first argument is
     argument zero.

`void set_value(NODE *tree)'
     This function is called from within a C extension function to set
     the return value from the extension function.  This value is what
     the `awk' program sees as the return value from the new `awk'
     function.

`void update_ERRNO(void)'
     This function is called from within a C extension function to set
     the value of `gawk''s `ERRNO' variable, based on the current value
     of the C `errno' variable.  It is provided as a convenience.

   An argument that is supposed to be an array needs to be handled with
some extra code, in case the array being passed in is actually from a
function parameter.  The following boilerplate code shows how to do
this:

     NODE *the_arg;
     
     the_arg = get_argument(tree, 2); /* assume need 3rd arg, 0-based */
     
     /* if a parameter, get it off the stack */
     if (the_arg->type == Node_param_list)
         the_arg = stack_ptr[the_arg->param_cnt];
     
     /* parameter referenced an array, get it */
     if (the_arg->type == Node_array_ref)
         the_arg = the_arg->orig_array;
     
     /* check type */
     if (the_arg->type != Node_var && the_arg->type != Node_var_array)
         fatal("newfunc: third argument is not an array");
     
     /* force it to be an array, if necessary, clear it */
     the_arg->type = Node_var_array;
     assoc_clear(the_arg);

   Again, you should spend time studying the `gawk' internals; don't
just blindly copy this code.


File: gawk.info,  Node: Sample Library,  Prev: Internals,  Up: Dynamic Extensions

Directory and File Operation Built-ins
--------------------------------------

   Two useful functions that are not in `awk' are `chdir' (so that an
`awk' program can change its directory) and `stat' (so that an `awk'
program can gather information about a file).  This minor node
implements these functions for `gawk' in an external extension library.

* Menu:

* Internal File Description::   What the new functions will do.
* Internal File Ops::           The code for internal file operations.
* Using Internal File Ops::     How to use an external extension.


File: gawk.info,  Node: Internal File Description,  Next: Internal File Ops,  Prev: Sample Library,  Up: Sample Library

Using `chdir' and `stat'
........................

   This minor node shows how to use the new functions at the `awk'
level once they've been integrated into the running `gawk' interpreter.
Using `chdir' is very straightforward. It takes one argument, the new
directory to change to:

     ...
     newdir = "/home/arnold/funstuff"
     ret = chdir(newdir)
     if (ret < 0) {
         printf("could not change to %s: %s\n",
                        newdir, ERRNO) > "/dev/stderr"
         exit 1
     }
     ...

   The return value is negative if the `chdir' failed, and `ERRNO'
(*note Built-in Variables::) is set to a string indicating the error.

   Using `stat' is a bit more complicated.  The C `stat' function fills
in a structure that has a fair amount of information.  The right way to
model this in `awk' is to fill in an associative array with the
appropriate information:

     file = "/home/arnold/.profile"
     fdata[1] = "x"    # force `fdata' to be an array
     ret = stat(file, fdata)
     if (ret < 0) {
         printf("could not stat %s: %s\n",
                  file, ERRNO) > "/dev/stderr"
         exit 1
     }
     printf("size of %s is %d bytes\n", file, fdata["size"])

   The `stat' function always clears the data array, even if the `stat'
fails.  It fills in the following elements:

`"name"'
     The name of the file that was `stat''ed.

`"dev"'
`"ino"'
     The file's device and inode numbers, respectively.

`"mode"'
     The file's mode, as a numeric value. This includes both the file's
     type and its permissions.

`"nlink"'
     The number of hard links (directory entries) the file has.

`"uid"'
`"gid"'
     The numeric user and group ID numbers of the file's owner.

`"size"'
     The size in bytes of the file.

`"blocks"'
     The number of disk blocks the file actually occupies. This may not
     be a function of the file's size if the file has holes.

`"atime"'
`"mtime"'
`"ctime"'
     The file's last access, modification, and inode update times,
     respectively.  These are numeric timestamps, suitable for
     formatting with `strftime' (*note Built-in Functions: Built-in.).

`"pmode"'
     The file's "printable mode."  This is a string representation of
     the file's type and permissions, such as what is produced by `ls
     -l'--for example, `"drwxr-xr-x"'.

`"type"'
     A printable string representation of the file's type.  The value
     is one of the following:

    `"blockdev"'
    `"chardev"'
          The file is a block or character device ("special file").

    `"directory"'
          The file is a directory.

    `"fifo"'
          The file is a named-pipe (also known as a FIFO).

    `"file"'
          The file is just a regular file.

    `"socket"'
          The file is an `AF_UNIX' ("Unix domain") socket in the
          filesystem.

    `"symlink"'
          The file is a symbolic link.

   Several additional elements may be present depending upon the
operating system and the type of the file.  You can test for them in
your `awk' program by using the `in' operator (*note Referring to an
Array Element: Reference to Elements.):

`"blksize"'
     The preferred block size for I/O to the file. This field is not
     present on all POSIX-like systems in the C `stat' structure.

`"linkval"'
     If the file is a symbolic link, this element is the name of the
     file the link points to (i.e., the value of the link).

`"rdev"'
`"major"'
`"minor"'
     If the file is a block or character device file, then these values
     represent the numeric device number and the major and minor
     components of that number, respectively.


File: gawk.info,  Node: Internal File Ops,  Next: Using Internal File Ops,  Prev: Internal File Description,  Up: Sample Library

C Code for `chdir' and `stat'
.............................

   Here is the C code for these extensions.  They were written for
GNU/Linux.  The code needs some more work for complete portability to
other POSIX-compliant systems:(1)

     #include "awk.h"
     
     #include <sys/sysmacros.h>
     
     /*  do_chdir --- provide dynamically loaded
                      chdir() builtin for gawk */
     
     static NODE *
     do_chdir(tree)
     NODE *tree;
     {
         NODE *newdir;
         int ret = -1;
     
         newdir = get_argument(tree, 0);

   The file includes the `"awk.h"' header file for definitions for the
`gawk' internals.  It includes `<sys/sysmacros.h>' for access to the
`major' and `minor' macros.

   By convention, for an `awk' function `foo', the function that
implements it is called `do_foo'.  The function should take a `NODE *'
argument, usually called `tree', that represents the argument list to
the function.  The `newdir' variable represents the new directory to
change to, retrieved with `get_argument'.  Note that the first argument
is numbered zero.

   This code actually accomplishes the `chdir'. It first forces the
argument to be a string and passes the string value to the `chdir'
system call. If the `chdir' fails, `ERRNO' is updated.  The result of
`force_string' has to be freed with `free_temp':

         if (newdir != NULL) {
             (void) force_string(newdir);
             ret = chdir(newdir->stptr);
             if (ret < 0)
                 update_ERRNO();
     
             free_temp(newdir);
         }

   Finally, the function returns the return value to the `awk' level,
using `set_value'. Then it must return a value from the call to the new
built-in (this value ignored by the interpreter):

         /* Set the return value */
         set_value(tmp_number((AWKNUM) ret));
     
         /* Just to make the interpreter happy */
         return tmp_number((AWKNUM) 0);
     }

   The `stat' built-in is more involved.  First comes a function that
turns a numeric mode into a printable representation (e.g., 644 becomes
`-rw-r--r--'). This is omitted here for brevity:

     /* format_mode --- turn a stat mode field
                        into something readable */
     
     static char *
     format_mode(fmode)
     unsigned long fmode;
     {
         ...
     }

   Next comes the actual `do_stat' function itself.  First come the
variable declarations and argument checking:

     /* do_stat --- provide a stat() function for gawk */
     
     static NODE *
     do_stat(tree)
     NODE *tree;
     {
         NODE *file, *array;
         struct stat sbuf;
         int ret;
         char *msg;
         NODE **aptr;
         char *pmode;    /* printable mode */
         char *type = "unknown";
     
         /* check arg count */
         if (tree->param_cnt != 2)
             fatal(
         "stat: called with %d arguments, should be 2",
                 tree->param_cnt);

   Then comes the actual work. First, we get the arguments.  Then, we
always clear the array.  To get the file information, we use `lstat',
in case the file is a symbolic link.  If there's an error, we set
`ERRNO' and return:

         /*
          * directory is first arg,
          * array to hold results is second
          */
         file = get_argument(tree, 0);
         array = get_argument(tree, 1);
     
         /* empty out the array */
         assoc_clear(array);
     
         /* lstat the file, if error, set ERRNO and return */
         (void) force_string(file);
         ret = lstat(file->stptr, & sbuf);
         if (ret < 0) {
             update_ERRNO();
     
             set_value(tmp_number((AWKNUM) ret));
     
             free_temp(file);
             return tmp_number((AWKNUM) 0);
         }

   Now comes the tedious part: filling in the array.  Only a few of the
calls are shown here, since they all follow the same pattern:

         /* fill in the array */
         aptr = assoc_lookup(array, tmp_string("name", 4), FALSE);
         *aptr = dupnode(file);
     
         aptr = assoc_lookup(array, tmp_string("mode", 4), FALSE);
         *aptr = make_number((AWKNUM) sbuf.st_mode);
     
         aptr = assoc_lookup(array, tmp_string("pmode", 5), FALSE);
         pmode = format_mode(sbuf.st_mode);
         *aptr = make_string(pmode, strlen(pmode));

   When done, we free the temporary value containing the file name, set
the return value, and return:

         free_temp(file);
     
         /* Set the return value */
         set_value(tmp_number((AWKNUM) ret));
     
         /* Just to make the interpreter happy */
         return tmp_number((AWKNUM) 0);
     }

   Finally, it's necessary to provide the "glue" that loads the new
function(s) into `gawk'.  By convention, each library has a routine
named `dlload' that does the job:

     /* dlload --- load new builtins in this library */
     
     NODE *
     dlload(tree, dl)
     NODE *tree;
     void *dl;
     {
         make_builtin("chdir", do_chdir, 1);
         make_builtin("stat", do_stat, 2);
         return tmp_number((AWKNUM) 0);
     }

   And that's it!  As an exercise, consider adding functions to
implement system calls such as `chown', `chmod', and `umask'.

   ---------- Footnotes ----------

   (1) This version is edited slightly for presentation.  The complete
version can be found in `extension/filefuncs.c' in the `gawk'
distribution.


File: gawk.info,  Node: Using Internal File Ops,  Prev: Internal File Ops,  Up: Sample Library

Integrating the Extensions
..........................

   Now that the code is written, it must be possible to add it at
runtime to the running `gawk' interpreter.  First, the code must be
compiled.  Assuming that the functions are in a file named
`filefuncs.c', and IDIR is the location of the `gawk' include files,
the following steps create a GNU/Linux shared library:

     $ gcc -shared -DHAVE_CONFIG_H -c -O -g -IIDIR filefuncs.c
     $ ld -o filefuncs.so -shared filefuncs.o

   Once the library exists, it is loaded by calling the `extension'
built-in function.  This function takes two arguments: the name of the
library to load and the name of a function to call when the library is
first loaded. This function adds the new functions to `gawk'.  It
returns the value returned by the initialization function within the
shared library:

     # file testff.awk
     BEGIN {
         extension("./filefuncs.so", "dlload")
     
         chdir(".")  # no-op
     
         data[1] = 1 # force `data' to be an array
         print "Info for testff.awk"
         ret = stat("testff.awk", data)
         print "ret =", ret
         for (i in data)
             printf "data[\"%s\"] = %s\n", i, data[i]
         print "testff.awk modified:",
             strftime("%m %d %y %H:%M:%S", data["mtime"])
     }

   Here are the results of running the program:

     $ gawk -f testff.awk
     -| Info for testff.awk
     -| ret = 0
     -| data["blksize"] = 4096
     -| data["mtime"] = 932361936
     -| data["mode"] = 33188
     -| data["type"] = file
     -| data["dev"] = 2065
     -| data["gid"] = 10
     -| data["ino"] = 878597
     -| data["ctime"] = 971431797
     -| data["blocks"] = 2
     -| data["nlink"] = 1
     -| data["name"] = testff.awk
     -| data["atime"] = 971608519
     -| data["pmode"] = -rw-r--r--
     -| data["size"] = 607
     -| data["uid"] = 2076
     -| testff.awk modified: 07 19 99 08:25:36


File: gawk.info,  Node: Future Extensions,  Prev: Dynamic Extensions,  Up: Notes

Probable Future Extensions
==========================

     AWK is a language similar to PERL, only considerably more elegant.
     Arnold Robbins

     Hey!
     Larry Wall

   This minor node briefly lists extensions and possible improvements
that indicate the directions we are currently considering for `gawk'.
The file `FUTURES' in the `gawk' distribution lists these extensions as
well.

   Following is a list of probable future changes visible at the `awk'
language level:

Loadable module interface
     It is not clear that the `awk'-level interface to the modules
     facility is as good as it should be.  The interface needs to be
     redesigned, particularly taking namespace issues into account, as
     well as possibly including issues such as library search path order
     and versioning.

`RECLEN' variable for fixed-length records
     Along with `FIELDWIDTHS', this would speed up the processing of
     fixed-length records.  `PROCINFO["RS"]' would be `"RS"' or
     `"RECLEN"', depending upon which kind of record processing is in
     effect.

Additional `printf' specifiers
     The 1999 ISO C standard added a number of additional `printf'
     format specifiers.  These should be evaluated for possible
     inclusion in `gawk'.

Databases
     It may be possible to map a GDBM/NDBM/SDBM file into an `awk'
     array.

Large character sets
     It would be nice if `gawk' could handle UTF-8 and other character
     sets that are larger than eight bits.

More `lint' warnings
     There are more things that could be checked for portability.

   Following is a list of probable improvements that will make `gawk''s
source code easier to work with:

Loadable module mechanics
     The current extension mechanism works (*note Adding New Built-in
     Functions to `gawk': Dynamic Extensions.), but is rather
     primitive. It requires a fair amount of manual work to create and
     integrate a loadable module.  Nor is the current mechanism as
     portable as might be desired.  The GNU `libtool' package provides
     a number of features that would make using loadable modules much
     easier.  `gawk' should be changed to use `libtool'.

Loadable module internals
     The API to its internals that `gawk' "exports" should be revised.
     Too many things are needlessly exposed.  A new API should be
     designed and implemented to make module writing easier.

Better array subscript management
     `gawk''s management of array subscript storage could use revamping,
     so that using the same value to index multiple arrays only stores
     one copy of the index value.

Integrating the DBUG library
     Integrating Fred Fish's DBUG library would be helpful during
     development, but it's a lot of work to do.

   Following is a list of probable improvements that will make `gawk'
perform better:

An improved version of `dfa'
     The `dfa' pattern matcher from GNU `grep' has some problems.
     Either a new version or a fixed one will deal with some important
     regexp matching issues.

Compilation of `awk' programs
     `gawk' uses a Bison (YACC-like) parser to convert the script given
     it into a syntax tree; the syntax tree is then executed by a
     simple recursive evaluator.  This method incurs a lot of overhead,
     since the recursive evaluator performs many procedure calls to do
     even the simplest things.

     It should be possible for `gawk' to convert the script's parse tree
     into a C program which the user would then compile, using the
     normal C compiler and a special `gawk' library to provide all the
     needed functions (regexps, fields, associative arrays, type
     coercion, and so on).

     An easier possibility might be for an intermediate phase of `gawk'
     to convert the parse tree into a linear byte code form like the
     one used in GNU Emacs Lisp.  The recursive evaluator would then be
     replaced by a straight line byte code interpreter that would be
     intermediate in speed between running a compiled program and doing
     what `gawk' does now.

   Finally, the programs in the test suite could use documenting in
this Info file.

   *Note Making Additions to `gawk': Additions, if you are interested
in tackling any of these projects.


File: gawk.info,  Node: Basic Concepts,  Next: Glossary,  Prev: Notes,  Up: Top

Basic Programming Concepts
**************************

   This major node attempts to define some of the basic concepts and
terms that are used throughout the rest of this Info file.  As this
Info file is specifically about `awk', and not about computer
programming in general, the coverage here is by necessity fairly
cursory and simplistic.  (If you need more background, there are many
other introductory texts that you should refer to instead.)

* Menu:

* Basic High Level::            The high level view.
* Basic Data Typing::           A very quick intro to data types.
* Floating Point Issues::       Stuff to know about floating-point numbers.


File: gawk.info,  Node: Basic High Level,  Next: Basic Data Typing,  Prev: Basic Concepts,  Up: Basic Concepts

What a Program Does
===================

   At the most basic level, the job of a program is to process some
input data and produce results.

                       _______
     +------+         /       \         +---------+
     | Data | -----> < Program > -----> | Results |
     +------+         \_______/         +---------+

   The "program" in the figure can be either a compiled program(1)
(such as `ls'), or it may be "interpreted".  In the latter case, a
machine-executable program such as `awk' reads your program, and then
uses the instructions in your program to process the data.

   When you write a program, it usually consists of the following, very
basic set of steps:

                                   ______
     +----------------+           / More \  No       +----------+
     | Initialization | -------> <  Data  > -------> | Clean Up |
     +----------------+    ^      \   ?  /           +----------+
                           |       +--+-+
                           |          | Yes
                           |          |
                           |          V
                           |     +---------+
                           +-----+ Process |
                                 +---------+

Initialization
     These are the things you do before actually starting to process
     data, such as checking arguments, initializing any data you need
     to work with, and so on.  This step corresponds to `awk''s `BEGIN'
     rule (*note The `BEGIN' and `END' Special Patterns: BEGIN/END.).

     If you were baking a cake, this might consist of laying out all the
     mixing bowls and the baking pan, and making sure you have all the
     ingredients that you need.

Processing
     This is where the actual work is done.  Your program reads data,
     one logical chunk at a time, and processes it as appropriate.

     In most programming languages, you have to manually manage the
     reading of data, checking to see if there is more each time you
     read a chunk.  `awk''s pattern-action paradigm (*note Getting
     Started with `awk': Getting Started.)  handles the mechanics of
     this for you.

     In baking a cake, the processing corresponds to the actual labor:
     breaking eggs, mixing the flour, water, and other ingredients, and
     then putting the cake into the oven.

Clean Up
     Once you've processed all the data, you may have things you need to
     do before exiting.  This step corresponds to `awk''s `END' rule
     (*note The `BEGIN' and `END' Special Patterns: BEGIN/END.).

     After the cake comes out of the oven, you still have to wrap it in
     plastic wrap to keep anyone from tasting it, as well as wash the
     mixing bowls and utensils.

   An "algorithm" is a detailed set of instructions necessary to
accomplish a task, or process data.  It is much the same as a recipe
for baking a cake.  Programs implement algorithms.  Often, it is up to
you to design the algorithm and implement it, simultaneously.

   The "logical chunks" we talked about previously are called "records",
similar to the records a company keeps on employees, a school keeps for
students, or a doctor keeps for patients.  Each record has many
component parts, such as first and last names, date of birth, address,
and so on.  The component parts are referred to as the "fields" of the
record.

   The act of reading data is termed "input", and that of generating
results, not too surprisingly, is termed "output".  They are often
referred to together as "input/output," and even more often, as "I/O"
for short.  (You will also see "input" and "output" used as verbs.)

   `awk' manages the reading of data for you, as well as the breaking
it up into records and fields.  Your program's job is to tell `awk'
what to with the data.  You do this by describing "patterns" in the
data to look for, and "actions" to execute when those patterns are
seen.  This "data-driven" nature of `awk' programs usually makes them
both easier to write and easier to read.

   ---------- Footnotes ----------

   (1) Compiled programs are typically written in lower-level languages
such as C, C++, Fortran, or Ada, and then translated, or "compiled",
into a form that the computer can execute directly.


File: gawk.info,  Node: Basic Data Typing,  Next: Floating Point Issues,  Prev: Basic High Level,  Up: Basic Concepts

Data Values in a Computer
=========================

   In a program, you keep track of information and values in things
called "variables".  A variable is just a name for a given value, such
as `first_name', `last_name', `address', and so on.  `awk' has several
predefined variables, and it has special names to refer to the current
input record and the fields of the record.  You may also group multiple
associated values under one name, as an array.

   Data, particularly in `awk', consists of either numeric values, such
as 42 or 3.1415927, or string values.  String values are essentially
anything that's not a number, such as a name.  Strings are sometimes
referred to as "character data", since they store the individual
characters that comprise them.  Individual variables, as well as
numeric and string variables, are referred to as "scalar" values.
Groups of values, such as arrays, are not scalars.

   Within computers, there are two kinds of numeric values: "integers"
and "floating-point".  In school, integer values were referred to as
"whole" numbers--that is, numbers without any fractional part, such as
1, 42, or -17.  The advantage to integer numbers is that they represent
values exactly.  The disadvantage is that their range is limited.  On
most modern systems, this range is -2,147,483,648 to 2,147,483,647.

   Integer values come in two flavors: "signed" and "unsigned".  Signed
values may be negative or positive, with the range of values just
described.  Unsigned values are always positive.  On most modern
systems, the range is from 0 to 4,294,967,295.

   Floating-point numbers represent what are called "real" numbers;
i.e., those that do have a fractional part, such as 3.1415927.  The
advantage to floating-point numbers is that they can represent a much
larger range of values.  The disadvantage is that there are numbers
that they cannot represent exactly.  `awk' uses "double-precision"
floating-point numbers, which can hold more digits than
"single-precision" floating-point numbers.  Floating-point issues are
discussed more fully in *Note Floating-Point Number Caveats: Floating
Point Issues.

   At the very lowest level, computers store values as groups of binary
digits, or "bits".  Modern computers group bits into groups of eight,
called "bytes".  Advanced applications sometimes have to manipulate
bits directly, and `gawk' provides functions for doing so.

   While you are probably used to the idea of a number without a value
(i.e., zero), it takes a bit more getting used to the idea of
zero-length character data.  Nevertheless, such a thing exists.  It is
called the "null string".  The null string is character data that has
no value.  In other words, it is empty.  It is written in `awk' programs
like this: `""'.

   Humans are used to working in decimal; i.e., base 10.  In base 10,
numbers go from 0 to 9, and then "roll over" into the next column.
(Remember grade school? 42 is 4 times 10 plus 2.)

   There are other number bases though.  Computers commonly use base 2
or "binary", base 8 or "octal", and base 16 or "hexadecimal".  In
binary, each column represents two times the value in the column to its
right. Each column may contain either a 0 or a 1.  Thus, binary 1010
represents 1 times 8, plus 0 times 4, plus 1 times 2, plus 0 times 1,
or decimal 10.  Octal and hexadecimal are discussed more in *Note Octal
and Hexadecimal Numbers: Nondecimal-numbers.

   Programs are written in programming languages.  Hundreds, if not
thousands, of programming languages exist.  One of the most popular is
the C programming language.  The C language had a very strong influence
on the design of the `awk' language.

   There have been several versions of C.  The first is often referred
to as "K&R" C, after the initials of Brian Kernighan and Dennis Ritchie,
the authors of the first book on C.  (Dennis Ritchie created the
language, and Brian Kernighan was one of the creators of `awk'.)

   In the mid-1980s, an effort began to produce an international
standard for C.  This work culminated in 1989, with the production of
the ANSI standard for C.  This standard became an ISO standard in 1990.
Where it makes sense, POSIX `awk' is compatible with 1990 ISO C.

   In 1999, a revised ISO C standard was approved and released.  Future
versions of `gawk' will be as compatible as possible with this standard.


File: gawk.info,  Node: Floating Point Issues,  Prev: Basic Data Typing,  Up: Basic Concepts

Floating-Point Number Caveats
=============================

   As mentioned earlier, floating-point numbers represent what are
called "real" numbers, i.e., those that have a fractional part.  `awk'
uses double-precision floating-point numbers to represent all numeric
values.  This minor node describes some of the issues involved in using
floating-point numbers.

   There is a very nice paper on floating-point arithmetic by David
Goldberg, "What Every Computer Scientist Should Know About
Floating-point Arithmetic," `ACM Computing Surveys' *23*, 1 (1991-03),
5-48.(1) This is worth reading if you are interested in the details,
but it does require a background in computer science.

   Internally, `awk' keeps both the numeric value (double-precision
floating-point) and the string value for a variable.  Separately, `awk'
keeps track of what type the variable has (*note Variable Typing and
Comparison Expressions: Typing and Comparison.), which plays a role in
how variables are used in comparisons.

   It is important to note that the string value for a number may not
reflect the full value (all the digits) that the numeric value actually
contains.  The following program (`values.awk') illustrates this:

     {
        $1 = $2 + $3
        # see it for what it is
        printf("$1 = %.12g\n", $1)
        # use CONVFMT
        a = "<" $1 ">"
        print "a =", a
        # use OFMT
        print "$1 =", $1
     }

This program shows the full value of the sum of `$2' and `$3' using
`printf', and then prints the string values obtained from both
automatic conversion (via `CONVFMT') and from printing (via `OFMT').

   Here is what happens when the program is run:

     $ echo 2 3.654321 1.2345678 | awk -f values.awk
     -| $1 = 4.8888888
     -| a = <4.88889>
     -| $1 = 4.88889

   This makes it clear that the full numeric value is different from
what the default string representations show.

   `CONVFMT''s default value is `"%.6g"', which yields a value with at
least six significant digits.  For some applications, you might want to
change it to specify more precision.  On most modern machines, most of
the time, 17 digits is enough to capture a floating-point number's
value exactly.(2)

   Unlike numbers in the abstract sense (such as what you studied in
high school or college math), numbers stored in computers are limited
in certain ways.  They cannot represent an infinite number of digits,
nor can they always represent things exactly.  In particular,
floating-point numbers cannot always represent values exactly.  Here is
an example:

     $ awk '{ printf("%010d\n", $1 * 100) }'
     515.79
     -| 0000051579
     515.80
     -| 0000051579
     515.81
     -| 0000051580
     515.82
     -| 0000051582
     Ctrl-d

This shows that some values can be represented exactly, whereas others
are only approximated.  This is not a "bug" in `awk', but simply an
artifact of how computers represent numbers.

   Another peculiarity of floating-point numbers on modern systems is
that they often have more than one representation for the number zero!
In particular, it is possible to represent "minus zero" as well as
regular, or "positive" zero.

   This example shows that negative and positive zero are distinct
values when stored internally, but that they are in fact equal to each
other, as well as to "regular" zero:

     $ gawk 'BEGIN { mz = -0 ; pz = 0
     > printf "-0 = %g, +0 = %g, (-0 == +0) -> %d\n", mz, pz, mz == pz
     > printf "mz == 0 -> %d, pz == 0 -> %d\n", mz == 0, pz == 0
     > }'
     -| -0 = -0, +0 = 0, (-0 == +0) -> 1
     -| mz == 0 -> 1, pz == 0 -> 1

   It helps to keep this in mind should you process numeric data that
contains negative zero values; the fact that the zero is negative is
noted and can affect comparisons.

   ---------- Footnotes ----------

   (1) `http://www.validgh.com/goldberg/paper.ps'.

   (2) Pathological cases can require up to 752 digits (!), but we
doubt that you need to worry about this.


File: gawk.info,  Node: Glossary,  Next: Copying,  Prev: Basic Concepts,  Up: Top

Glossary
********

Action
     A series of `awk' statements attached to a rule.  If the rule's
     pattern matches an input record, `awk' executes the rule's action.
     Actions are always enclosed in curly braces.  (*Note Actions:
     Action Overview.)

Amazing `awk' Assembler
     Henry Spencer at the University of Toronto wrote a retargetable
     assembler completely as `sed' and `awk' scripts.  It is thousands
     of lines long, including machine descriptions for several eight-bit
     microcomputers.  It is a good example of a program that would have
     been better written in another language.  You can get it from
     `ftp://ftp.freefriends.org/arnold/Awkstuff/aaa.tgz'.

Amazingly Workable Formatter (`awf')
     Henry Spencer at the University of Toronto wrote a formatter that
     accepts a large subset of the `nroff -ms' and `nroff -man'
     formatting commands, using `awk' and `sh'.  It is available over
     the Internet from
     `ftp://ftp.freefriends.org/arnold/Awkstuff/awf.tgz'.

Anchor
     The regexp metacharacters `^' and `$', which force the match to
     the beginning or end of the string, respectively.

ANSI
     The American National Standards Institute.  This organization
     produces many standards, among them the standards for the C and
     C++ programming languages.  These standards often become
     international standards as well. See also "ISO."

Array
     A grouping of multiple values under the same name.  Most languages
     just provide sequential arrays.  `awk' provides associative arrays.

Assertion
     A statement in a program that a condition is true at this point in
     the program.  Useful for reasoning about how a program is supposed
     to behave.

Assignment
     An `awk' expression that changes the value of some `awk' variable
     or data object.  An object that you can assign to is called an
     "lvalue".  The assigned values are called "rvalues".  *Note
     Assignment Expressions: Assignment Ops.

Associative Array
     Arrays in which the indices may be numbers or strings, not just
     sequential integers in a fixed range.

`awk' Language
     The language in which `awk' programs are written.

`awk' Program
     An `awk' program consists of a series of "patterns" and "actions",
     collectively known as "rules".  For each input record given to the
     program, the program's rules are all processed in turn.  `awk'
     programs may also contain function definitions.

`awk' Script
     Another name for an `awk' program.

Bash
     The GNU version of the standard shell (the Bourne-Again SHell).
     See also "Bourne Shell."

BBS
     See "Bulletin Board System."

Bit
     Short for "Binary Digit."  All values in computer memory
     ultimately reduce to binary digits: values that are either zero or
     one.  Groups of bits may be interpreted differently--as integers,
     floating-point numbers, character data, addresses of other memory
     objects, or other data.  `awk' lets you work with floating-point
     numbers and strings.  `gawk' lets you manipulate bit values with
     the built-in functions described in *Note Using `gawk''s Bit
     Manipulation Functions: Bitwise Functions.

     Computers are often defined by how many bits they use to represent
     integer values.  Typical systems are 32-bit systems, but 64-bit
     systems are becoming increasingly popular, and 16-bit systems are
     waning in popularity.

Boolean Expression
     Named after the English mathematician Boole. See also "Logical
     Expression."

Bourne Shell
     The standard shell (`/bin/sh') on Unix and Unix-like systems,
     originally written by Steven R. Bourne.  Many shells (`bash',
     `ksh', `pdksh', `zsh') are generally upwardly compatible with the
     Bourne shell.

Built-in Function
     The `awk' language provides built-in functions that perform various
     numerical, I/O-related, and string computations.  Examples are
     `sqrt' (for the square root of a number) and `substr' (for a
     substring of a string).  `gawk' provides functions for timestamp
     management, bit manipulation, and runtime string translation.
     (*Note Built-in Functions: Built-in.)

Built-in Variable
     `ARGC', `ARGV', `CONVFMT', `ENVIRON', `FILENAME', `FNR', `FS',
     `NF', `NR', `OFMT', `OFS', `ORS', `RLENGTH', `RSTART', `RS', and
     `SUBSEP' are the variables that have special meaning to `awk'.  In
     addition, `ARGIND', `BINMODE', `ERRNO', `FIELDWIDTHS',
     `IGNORECASE', `LINT', `PROCINFO', `RT', and `TEXTDOMAIN' are the
     variables that have special meaning to `gawk'.  Changing some of
     them affects `awk''s running environment.  (*Note Built-in
     Variables::.)

Braces
     See "Curly Braces."

Bulletin Board System
     A computer system allowing users to log in and read and/or leave
     messages for other users of the system, much like leaving paper
     notes on a bulletin board.

C
     The system programming language that most GNU software is written
     in.  The `awk' programming language has C-like syntax, and this
     Info file points out similarities between `awk' and C when
     appropriate.

     In general, `gawk' attempts to be as similar to the 1990 version
     of ISO C as makes sense.  Future versions of `gawk' may adopt
     features from the newer 1999 standard, as appropriate.

C++
     A popular object-oriented programming language derived from C.

Character Set
     The set of numeric codes used by a computer system to represent the
     characters (letters, numbers, punctuation, etc.) of a particular
     country or place. The most common character set in use today is
     ASCII (American Standard Code for Information Interchange).  Many
     European countries use an extension of ASCII known as ISO-8859-1
     (ISO Latin-1).

CHEM
     A preprocessor for `pic' that reads descriptions of molecules and
     produces `pic' input for drawing them.  It was written in `awk' by
     Brian Kernighan and Jon Bentley, and is available from
     `http://cm.bell-labs.com/netlib/typesetting/chem.gz'.

Coprocess
     A subordinate program with which two-way communications is
     possible.

Compiler
     A program that translates human-readable source code into
     machine-executable object code.  The object code is then executed
     directly by the computer.  See also "Interpreter."

Compound Statement
     A series of `awk' statements, enclosed in curly braces.  Compound
     statements may be nested.  (*Note Control Statements in Actions:
     Statements.)

Concatenation
     Concatenating two strings means sticking them together, one after
     another, producing a new string.  For example, the string `foo'
     concatenated with the string `bar' gives the string `foobar'.
     (*Note String Concatenation: Concatenation.)

Conditional Expression
     An expression using the `?:' ternary operator, such as `EXPR1 ?
     EXPR2 : EXPR3'.  The expression EXPR1 is evaluated; if the result
     is true, the value of the whole expression is the value of EXPR2;
     otherwise the value is EXPR3.  In either case, only one of EXPR2
     and EXPR3 is evaluated. (*Note Conditional Expressions:
     Conditional Exp.)

Comparison Expression
     A relation that is either true or false, such as `(a < b)'.
     Comparison expressions are used in `if', `while', `do', and `for'
     statements, and in patterns to select which input records to
     process.  (*Note Variable Typing and Comparison Expressions:
     Typing and Comparison.)

Curly Braces
     The characters `{' and `}'.  Curly braces are used in `awk' for
     delimiting actions, compound statements, and function bodies.

Dark Corner
     An area in the language where specifications often were (or still
     are) not clear, leading to unexpected or undesirable behavior.
     Such areas are marked in this Info file with "(d.c.)" in the text
     and are indexed under the heading "dark corner."

Data Driven
     A description of `awk' programs, where you specify the data you
     are interested in processing, and what to do when that data is
     seen.

Data Objects
     These are numbers and strings of characters.  Numbers are
     converted into strings and vice versa, as needed.  (*Note
     Conversion of Strings and Numbers: Conversion.)

Deadlock
     The situation in which two communicating processes are each waiting
     for the other to perform an action.

Double-Precision
     An internal representation of numbers that can have fractional
     parts.  Double-precision numbers keep track of more digits than do
     single-precision numbers, but operations on them are sometimes
     more expensive.  This is the way `awk' stores numeric values.  It
     is the C type `double'.

Dynamic Regular Expression
     A dynamic regular expression is a regular expression written as an
     ordinary expression.  It could be a string constant, such as
     `"foo"', but it may also be an expression whose value can vary.
     (*Note Using Dynamic Regexps: Computed Regexps.)

Environment
     A collection of strings, of the form NAME`='VAL, that each program
     has available to it. Users generally place values into the
     environment in order to provide information to various programs.
     Typical examples are the environment variables `HOME' and `PATH'.

Empty String
     See "Null String."

Epoch
     The date used as the "beginning of time" for timestamps.  Time
     values in Unix systems are represented as seconds since the epoch,
     with library functions available for converting these values into
     standard date and time formats.

     The epoch on Unix and POSIX systems is 1970-01-01 00:00:00 UTC.
     See also "GMT" and "UTC."

Escape Sequences
     A special sequence of characters used for describing nonprinting
     characters, such as `\n' for newline or `\033' for the ASCII ESC
     (Escape) character. (*Note Escape Sequences::.)

FDL
     See "Free Documentation License."

Field
     When `awk' reads an input record, it splits the record into pieces
     separated by whitespace (or by a separator regexp that you can
     change by setting the built-in variable `FS').  Such pieces are
     called fields.  If the pieces are of fixed length, you can use the
     built-in variable `FIELDWIDTHS' to describe their lengths.  (*Note
     Specifying How Fields Are Separated: Field Separators, and *Note
     Reading Fixed-Width Data: Constant Size.)

Flag
     A variable whose truth value indicates the existence or
     nonexistence of some condition.

Floating-Point Number
     Often referred to in mathematical terms as a "rational" or real
     number, this is just a number that can have a fractional part.
     See also "Double-Precision" and "Single-Precision."

Format
     Format strings are used to control the appearance of output in the
     `strftime' and `sprintf' functions, and are used in the `printf'
     statement as well.  Also, data conversions from numbers to strings
     are controlled by the format string contained in the built-in
     variable `CONVFMT'. (*Note Format-Control Letters: Control
     Letters.)

Free Documentation License
     This document describes the terms under which this Info file is
     published and may be copied. (*Note GNU Free Documentation
     License::.)

Function
     A specialized group of statements used to encapsulate general or
     program-specific tasks.  `awk' has a number of built-in functions,
     and also allows you to define your own.  (*Note Functions::.)

FSF
     See "Free Software Foundation."

Free Software Foundation
     A nonprofit organization dedicated to the production and
     distribution of freely distributable software.  It was founded by
     Richard M. Stallman, the author of the original Emacs editor.  GNU
     Emacs is the most widely used version of Emacs today.

`gawk'
     The GNU implementation of `awk'.

General Public License
     This document describes the terms under which `gawk' and its source
     code may be distributed. (*Note GNU General Public License:
     Copying.)

GMT
     "Greenwich Mean Time."  This is the old term for UTC.  It is the
     time of day used as the epoch for Unix and POSIX systems.  See
     also "Epoch" and "UTC."

GNU
     "GNU's not Unix".  An on-going project of the Free Software
     Foundation to create a complete, freely distributable,
     POSIX-compliant computing environment.

GNU/Linux
     A variant of the GNU system using the Linux kernel, instead of the
     Free Software Foundation's Hurd kernel.  Linux is a stable,
     efficient, full-featured clone of Unix that has been ported to a
     variety of architectures.  It is most popular on PC-class systems,
     but runs well on a variety of other systems too.  The Linux kernel
     source code is available under the terms of the GNU General Public
     License, which is perhaps its most important aspect.

GPL
     See "General Public License."

Hexadecimal
     Base 16 notation, where the digits are `0'-`9' and `A'-`F', with
     `A' representing 10, `B' representing 11, and so on, up to `F' for
     15.  Hexadecimal numbers are written in C using a leading `0x', to
     indicate their base.  Thus, `0x12' is 18 (1 times 16 plus 2).

I/O
     Abbreviation for "Input/Output," the act of moving data into and/or
     out of a running program.

Input Record
     A single chunk of data that is read in by `awk'.  Usually, an
     `awk' input record consists of one line of text.  (*Note How Input
     Is Split into Records: Records.)

Integer
     A whole number, i.e., a number that does not have a fractional
     part.

Internationalization
     The process of writing or modifying a program so that it can use
     multiple languages without requiring further source code changes.

Interpreter
     A program that reads human-readable source code directly, and uses
     the instructions in it to process data and produce results.  `awk'
     is typically (but not always) implemented as an interpreter.  See
     also "Compiler."

Interval Expression
     A component of a regular expression that lets you specify repeated
     matches of some part of the regexp.  Interval expressions were not
     traditionally available in `awk' programs.

ISO
     The International Standards Organization.  This organization
     produces international standards for many things, including
     programming languages, such as C and C++.  In the computer arena,
     important standards like those for C, C++, and POSIX become both
     American national and ISO international standards simultaneously.
     This Info file refers to Standard C as "ISO C" throughout.

Keyword
     In the `awk' language, a keyword is a word that has special
     meaning.  Keywords are reserved and may not be used as variable
     names.

     `gawk''s keywords are: `BEGIN', `END', `if', `else', `while',
     `do...while', `for', `for...in', `break', `continue', `delete',
     `next', `nextfile', `function', `func', and `exit'.

Lesser General Public License
     This document describes the terms under which binary library
     archives or shared objects, and their source code may be
     distributed.

Linux
     See "GNU/Linux."

LGPL
     See "Lesser General Public License."

Localization
     The process of providing the data necessary for an
     internationalized program to work in a particular language.

Logical Expression
     An expression using the operators for logic, AND, OR, and NOT,
     written `&&', `||', and `!' in `awk'. Often called Boolean
     expressions, after the mathematician who pioneered this kind of
     mathematical logic.

Lvalue
     An expression that can appear on the left side of an assignment
     operator.  In most languages, lvalues can be variables or array
     elements.  In `awk', a field designator can also be used as an
     lvalue.

Matching
     The act of testing a string against a regular expression.  If the
     regexp describes the contents of the string, it is said to "match"
     it.

Metacharacters
     Characters used within a regexp that do not stand for themselves.
     Instead, they denote regular expression operations, such as
     repetition, grouping, or alternation.

Null String
     A string with no characters in it.  It is represented explicitly in
     `awk' programs by placing two double quote characters next to each
     other (`""').  It can appear in input data by having two successive
     occurrences of the field separator appear next to each other.

Number
     A numeric-valued data object.  Modern `awk' implementations use
     double-precision floating-point to represent numbers.  Very old
     `awk' implementations use single-precision floating-point.

Octal
     Base-eight notation, where the digits are `0'-`7'.  Octal numbers
     are written in C using a leading `0', to indicate their base.
     Thus, `013' is 11 (one times 8 plus 3).

P1003.2
     See "POSIX."

Pattern
     Patterns tell `awk' which input records are interesting to which
     rules.

     A pattern is an arbitrary conditional expression against which
     input is tested.  If the condition is satisfied, the pattern is
     said to "match" the input record.  A typical pattern might compare
     the input record against a regular expression. (*Note Pattern
     Elements: Pattern Overview.)

POSIX
     The name for a series of standards that specify a Portable
     Operating System interface.  The "IX" denotes the Unix heritage of
     these standards.  The main standard of interest for `awk' users is
     `IEEE Standard for Information Technology, Standard 1003.2-1992,
     Portable Operating System Interface (POSIX) Part 2: Shell and
     Utilities'.  Informally, this standard is often referred to as
     simply "P1003.2."

Precedence
     The order in which operations are performed when operators are used
     without explicit parentheses.

Private
     Variables and/or functions that are meant for use exclusively by
     library functions and not for the main `awk' program. Special care
     must be taken when naming such variables and functions.  (*Note
     Naming Library Function Global Variables: Library Names.)

Range (of input lines)
     A sequence of consecutive lines from the input file(s).  A pattern
     can specify ranges of input lines for `awk' to process or it can
     specify single lines. (*Note Pattern Elements: Pattern Overview.)

Recursion
     When a function calls itself, either directly or indirectly.  If
     this isn't clear, refer to the entry for "recursion."

Redirection
     Redirection means performing input from something other than the
     standard input stream, or performing output to something other
     than the standard output stream.

     You can redirect the output of the `print' and `printf' statements
     to a file or a system command, using the `>', `>>', `|', and `|&'
     operators.  You can redirect input to the `getline' statement using
     the `<', `|', and `|&' operators.  (*Note Redirecting Output of
     `print' and `printf': Redirection, and *Note Explicit Input with
     `getline': Getline.)

Regexp
     Short for "regular expression".  A regexp is a pattern that
     denotes a set of strings, possibly an infinite set.  For example,
     the regexp `R.*xp' matches any string starting with the letter `R'
     and ending with the letters `xp'.  In `awk', regexps are used in
     patterns and in conditional expressions.  Regexps may contain
     escape sequences. (*Note Regular Expressions: Regexp.)

Regular Expression
     See "regexp."

Regular Expression Constant
     A regular expression constant is a regular expression written
     within slashes, such as `/foo/'.  This regular expression is chosen
     when you write the `awk' program and cannot be changed during its
     execution. (*Note How to Use Regular Expressions: Regexp Usage.)

Rule
     A segment of an `awk' program that specifies how to process single
     input records.  A rule consists of a "pattern" and an "action".
     `awk' reads an input record; then, for each rule, if the input
     record satisfies the rule's pattern, `awk' executes the rule's
     action.  Otherwise, the rule does nothing for that input record.

Rvalue
     A value that can appear on the right side of an assignment
     operator.  In `awk', essentially every expression has a value.
     These values are rvalues.

Scalar
     A single value, be it a number or a string.  Regular variables are
     scalars; arrays and functions are not.

Search Path
     In `gawk', a list of directories to search for `awk' program
     source files.  In the shell, a list of directories to search for
     executable programs.

Seed
     The initial value, or starting point, for a sequence of random
     numbers.

`sed'
     See "Stream Editor."

Shell
     The command interpreter for Unix and POSIX-compliant systems.  The
     shell works both interactively, and as a programming language for
     batch files, or shell scripts.

Short-Circuit
     The nature of the `awk' logical operators `&&' and `||'.  If the
     value of the entire expression is determinable from evaluating just
     the lefthand side of these operators, the righthand side is not
     evaluated.  (*Note Boolean Expressions: Boolean Ops.)

Side Effect
     A side effect occurs when an expression has an effect aside from
     merely producing a value.  Assignment expressions, increment and
     decrement expressions, and function calls have side effects.
     (*Note Assignment Expressions: Assignment Ops.)

Single-Precision
     An internal representation of numbers that can have fractional
     parts.  Single-precision numbers keep track of fewer digits than
     do double-precision numbers, but operations on them are sometimes
     less expensive in terms of CPU time.  This is the type used by
     some very old versions of `awk' to store numeric values.  It is
     the C type `float'.

Space
     The character generated by hitting the space bar on the keyboard.

Special File
     A file name interpreted internally by `gawk', instead of being
     handed directly to the underlying operating system--for example,
     `/dev/stderr'.  (*Note Special File Names in `gawk': Special
     Files.)

Stream Editor
     A program that reads records from an input stream and processes
     them one or more at a time.  This is in contrast with batch
     programs, which may expect to read their input files in entirety
     before starting to do anything, as well as with interactive
     programs which require input from the user.

String
     A datum consisting of a sequence of characters, such as `I am a
     string'.  Constant strings are written with double quotes in the
     `awk' language and may contain escape sequences.  (*Note Escape
     Sequences::.)

Tab
     The character generated by hitting the `TAB' key on the keyboard.
     It usually expands to up to eight spaces upon output.

Text Domain
     A unique name that identifies an application.  Used for grouping
     messages that are translated at runtime into the local language.

Timestamp
     A value in the "seconds since the epoch" format used by Unix and
     POSIX systems.  Used for the `gawk' functions `mktime',
     `strftime', and `systime'.  See also "Epoch" and "UTC."

Unix
     A computer operating system originally developed in the early
     1970's at AT&T Bell Laboratories.  It initially became popular in
     universities around the world and later moved into commercial
     environments as a software development system and network server
     system. There are many commercial versions of Unix, as well as
     several work-alike systems whose source code is freely available
     (such as GNU/Linux, NetBSD, FreeBSD, and OpenBSD).

UTC
     The accepted abbreviation for "Universal Coordinated Time."  This
     is standard time in Greenwich, England, which is used as a
     reference time for day and date calculations.  See also "Epoch"
     and "GMT."

Whitespace
     A sequence of space, TAB, or newline characters occurring inside
     an input record or a string.


File: gawk.info,  Node: Copying,  Next: GNU Free Documentation License,  Prev: Glossary,  Up: Top

GNU General Public License
**************************

                         Version 2, June 1991
     Copyright (C) 1989, 1991 Free Software Foundation, Inc.
     59 Temple Place, Suite 330, Boston, MA 02111, USA
     
     Everyone is permitted to copy and distribute verbatim copies
     of this license document, but changing it is not allowed.

Preamble
========

   The licenses for most software are designed to take away your
freedom to share and change it.  By contrast, the GNU General Public
License is intended to guarantee your freedom to share and change free
software--to make sure the software is free for all its users.  This
General Public License applies to most of the Free Software
Foundation's software and to any other program whose authors commit to
using it.  (Some other Free Software Foundation software is covered by
the GNU Library General Public License instead.)  You can apply it to
your programs, too.

   When we speak of free software, we are referring to freedom, not
price.  Our General Public Licenses are designed to make sure that you
have the freedom to distribute copies of free software (and charge for
this service if you wish), that you receive source code or can get it
if you want it, that you can change the software or use pieces of it in
new free programs; and that you know you can do these things.

   To protect your rights, we need to make restrictions that forbid
anyone to deny you these rights or to ask you to surrender the rights.
These restrictions translate to certain responsibilities for you if you
distribute copies of the software, or if you modify it.

   For example, if you distribute copies of such a program, whether
gratis or for a fee, you must give the recipients all the rights that
you have.  You must make sure that they, too, receive or can get the
source code.  And you must show them these terms so they know their
rights.

   We protect your rights with two steps: (1) copyright the software,
and (2) offer you this license which gives you legal permission to copy,
distribute and/or modify the software.

   Also, for each author's protection and ours, we want to make certain
that everyone understands that there is no warranty for this free
software.  If the software is modified by someone else and passed on, we
want its recipients to know that what they have is not the original, so
that any problems introduced by others will not reflect on the original
authors' reputations.

   Finally, any free program is threatened constantly by software
patents.  We wish to avoid the danger that redistributors of a free
program will individually obtain patent licenses, in effect making the
program proprietary.  To prevent this, we have made it clear that any
patent must be licensed for everyone's free use or not licensed at all.

   The precise terms and conditions for copying, distribution and
modification follow.

    TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
  0. This License applies to any program or other work which contains a
     notice placed by the copyright holder saying it may be distributed
     under the terms of this General Public License.  The "Program",
     below, refers to any such program or work, and a "work based on
     the Program" means either the Program or any derivative work under
     copyright law: that is to say, a work containing the Program or a
     portion of it, either verbatim or with modifications and/or
     translated into another language.  (Hereinafter, translation is
     included without limitation in the term "modification".)  Each
     licensee is addressed as "you".

     Activities other than copying, distribution and modification are
     not covered by this License; they are outside its scope.  The act
     of running the Program is not restricted, and the output from the
     Program is covered only if its contents constitute a work based on
     the Program (independent of having been made by running the
     Program).  Whether that is true depends on what the Program does.

  1. You may copy and distribute verbatim copies of the Program's
     source code as you receive it, in any medium, provided that you
     conspicuously and appropriately publish on each copy an appropriate
     copyright notice and disclaimer of warranty; keep intact all the
     notices that refer to this License and to the absence of any
     warranty; and give any other recipients of the Program a copy of
     this License along with the Program.

     You may charge a fee for the physical act of transferring a copy,
     and you may at your option offer warranty protection in exchange
     for a fee.

  2. You may modify your copy or copies of the Program or any portion
     of it, thus forming a work based on the Program, and copy and
     distribute such modifications or work under the terms of Section 1
     above, provided that you also meet all of these conditions:

       a. You must cause the modified files to carry prominent notices
          stating that you changed the files and the date of any change.

       b. You must cause any work that you distribute or publish, that
          in whole or in part contains or is derived from the Program
          or any part thereof, to be licensed as a whole at no charge
          to all third parties under the terms of this License.

       c. If the modified program normally reads commands interactively
          when run, you must cause it, when started running for such
          interactive use in the most ordinary way, to print or display
          an announcement including an appropriate copyright notice and
          a notice that there is no warranty (or else, saying that you
          provide a warranty) and that users may redistribute the
          program under these conditions, and telling the user how to
          view a copy of this License.  (Exception: if the Program
          itself is interactive but does not normally print such an
          announcement, your work based on the Program is not required
          to print an announcement.)

     These requirements apply to the modified work as a whole.  If
     identifiable sections of that work are not derived from the
     Program, and can be reasonably considered independent and separate
     works in themselves, then this License, and its terms, do not
     apply to those sections when you distribute them as separate
     works.  But when you distribute the same sections as part of a
     whole which is a work based on the Program, the distribution of
     the whole must be on the terms of this License, whose permissions
     for other licensees extend to the entire whole, and thus to each
     and every part regardless of who wrote it.

     Thus, it is not the intent of this section to claim rights or
     contest your rights to work written entirely by you; rather, the
     intent is to exercise the right to control the distribution of
     derivative or collective works based on the Program.

     In addition, mere aggregation of another work not based on the
     Program with the Program (or with a work based on the Program) on
     a volume of a storage or distribution medium does not bring the
     other work under the scope of this License.

  3. You may copy and distribute the Program (or a work based on it,
     under Section 2) in object code or executable form under the terms
     of Sections 1 and 2 above provided that you also do one of the
     following:

       a. Accompany it with the complete corresponding machine-readable
          source code, which must be distributed under the terms of
          Sections 1 and 2 above on a medium customarily used for
          software interchange; or,

       b. Accompany it with a written offer, valid for at least three
          years, to give any third party, for a charge no more than your
          cost of physically performing source distribution, a complete
          machine-readable copy of the corresponding source code, to be
          distributed under the terms of Sections 1 and 2 above on a
          medium customarily used for software interchange; or,

       c. Accompany it with the information you received as to the offer
          to distribute corresponding source code.  (This alternative is
          allowed only for noncommercial distribution and only if you
          received the program in object code or executable form with
          such an offer, in accord with Subsection b above.)

     The source code for a work means the preferred form of the work for
     making modifications to it.  For an executable work, complete
     source code means all the source code for all modules it contains,
     plus any associated interface definition files, plus the scripts
     used to control compilation and installation of the executable.
     However, as a special exception, the source code distributed need
     not include anything that is normally distributed (in either
     source or binary form) with the major components (compiler,
     kernel, and so on) of the operating system on which the executable
     runs, unless that component itself accompanies the executable.

     If distribution of executable or object code is made by offering
     access to copy from a designated place, then offering equivalent
     access to copy the source code from the same place counts as
     distribution of the source code, even though third parties are not
     compelled to copy the source along with the object code.

  4. You may not copy, modify, sublicense, or distribute the Program
     except as expressly provided under this License.  Any attempt
     otherwise to copy, modify, sublicense or distribute the Program is
     void, and will automatically terminate your rights under this
     License.  However, parties who have received copies, or rights,
     from you under this License will not have their licenses
     terminated so long as such parties remain in full compliance.

  5. You are not required to accept this License, since you have not
     signed it.  However, nothing else grants you permission to modify
     or distribute the Program or its derivative works.  These actions
     are prohibited by law if you do not accept this License.
     Therefore, by modifying or distributing the Program (or any work
     based on the Program), you indicate your acceptance of this
     License to do so, and all its terms and conditions for copying,
     distributing or modifying the Program or works based on it.

  6. Each time you redistribute the Program (or any work based on the
     Program), the recipient automatically receives a license from the
     original licensor to copy, distribute or modify the Program
     subject to these terms and conditions.  You may not impose any
     further restrictions on the recipients' exercise of the rights
     granted herein.  You are not responsible for enforcing compliance
     by third parties to this License.

  7. If, as a consequence of a court judgment or allegation of patent
     infringement or for any other reason (not limited to patent
     issues), conditions are imposed on you (whether by court order,
     agreement or otherwise) that contradict the conditions of this
     License, they do not excuse you from the conditions of this
     License.  If you cannot distribute so as to satisfy simultaneously
     your obligations under this License and any other pertinent
     obligations, then as a consequence you may not distribute the
     Program at all.  For example, if a patent license would not permit
     royalty-free redistribution of the Program by all those who
     receive copies directly or indirectly through you, then the only
     way you could satisfy both it and this License would be to refrain
     entirely from distribution of the Program.

     If any portion of this section is held invalid or unenforceable
     under any particular circumstance, the balance of the section is
     intended to apply and the section as a whole is intended to apply
     in other circumstances.

     It is not the purpose of this section to induce you to infringe any
     patents or other property right claims or to contest validity of
     any such claims; this section has the sole purpose of protecting
     the integrity of the free software distribution system, which is
     implemented by public license practices.  Many people have made
     generous contributions to the wide range of software distributed
     through that system in reliance on consistent application of that
     system; it is up to the author/donor to decide if he or she is
     willing to distribute software through any other system and a
     licensee cannot impose that choice.

     This section is intended to make thoroughly clear what is believed
     to be a consequence of the rest of this License.

  8. If the distribution and/or use of the Program is restricted in
     certain countries either by patents or by copyrighted interfaces,
     the original copyright holder who places the Program under this
     License may add an explicit geographical distribution limitation
     excluding those countries, so that distribution is permitted only
     in or among countries not thus excluded.  In such case, this
     License incorporates the limitation as if written in the body of
     this License.

  9. The Free Software Foundation may publish revised and/or new
     versions of the General Public License from time to time.  Such
     new versions will be similar in spirit to the present version, but
     may differ in detail to address new problems or concerns.

     Each version is given a distinguishing version number.  If the
     Program specifies a version number of this License which applies
     to it and "any later version", you have the option of following
     the terms and conditions either of that version or of any later
     version published by the Free Software Foundation.  If the Program
     does not specify a version number of this License, you may choose
     any version ever published by the Free Software Foundation.

 10. If you wish to incorporate parts of the Program into other free
     programs whose distribution conditions are different, write to the
     author to ask for permission.  For software which is copyrighted
     by the Free Software Foundation, write to the Free Software
     Foundation; we sometimes make exceptions for this.  Our decision
     will be guided by the two goals of preserving the free status of
     all derivatives of our free software and of promoting the sharing
     and reuse of software generally.

                                NO WARRANTY

 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO
     WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE
     LAW.  EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
     HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT
     WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT
     NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
     FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS TO THE
     QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
     PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY
     SERVICING, REPAIR OR CORRECTION.

 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN
     WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY
     MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE
     LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL,
     INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR
     INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
     DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU
     OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY
     OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN
     ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

                      END OF TERMS AND CONDITIONS

How to Apply These Terms to Your New Programs
=============================================

   If you develop a new program, and you want it to be of the greatest
possible use to the public, the best way to achieve this is to make it
free software which everyone can redistribute and change under these
terms.

   To do so, attach the following notices to the program.  It is safest
to attach them to the start of each source file to most effectively
convey the exclusion of warranty; and each file should have at least
the "copyright" line and a pointer to where the full notice is found.

     ONE LINE TO GIVE THE PROGRAM'S NAME AND AN IDEA OF WHAT IT DOES.
     Copyright (C) YEAR  NAME OF AUTHOR
     
     This program is free software; you can redistribute it and/or
     modify it under the terms of the GNU General Public License
     as published by the Free Software Foundation; either version 2
     of the License, or (at your option) any later version.
     
     This program is distributed in the hope that it will be useful,
     but WITHOUT ANY WARRANTY; without even the implied warranty of
     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
     GNU General Public License for more details.
     
     You should have received a copy of the GNU General Public License
     along with this program; if not, write to the Free Software
     Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111, USA.

   Also add information on how to contact you by electronic and paper
mail.

   If the program is interactive, make it output a short notice like
this when it starts in an interactive mode:

     Gnomovision version 69, Copyright (C) YEAR NAME OF AUTHOR
     Gnomovision comes with ABSOLUTELY NO WARRANTY; for details
     type `show w'.  This is free software, and you are welcome
     to redistribute it under certain conditions; type `show c'
     for details.

   The hypothetical commands `show w' and `show c' should show the
appropriate parts of the General Public License.  Of course, the
commands you use may be called something other than `show w' and `show
c'; they could even be mouse-clicks or menu items--whatever suits your
program.

   You should also get your employer (if you work as a programmer) or
your school, if any, to sign a "copyright disclaimer" for the program,
if necessary.  Here is a sample; alter the names:

     Yoyodyne, Inc., hereby disclaims all copyright
     interest in the program `Gnomovision'
     (which makes passes at compilers) written
     by James Hacker.
     
     SIGNATURE OF TY COON, 1 April 1989
     Ty Coon, President of Vice

   This General Public License does not permit incorporating your
program into proprietary programs.  If your program is a subroutine
library, you may consider it more useful to permit linking proprietary
applications with the library.  If this is what you want to do, use the
GNU Lesser General Public License instead of this License.


File: gawk.info,  Node: GNU Free Documentation License,  Next: Index,  Prev: Copying,  Up: Top

GNU Free Documentation License
******************************

                        Version 1.1, March 2000

     Copyright (C) 2000  Free Software Foundation, Inc.
     59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
     
     Everyone is permitted to copy and distribute verbatim copies
     of this license document, but changing it is not allowed.


  0. PREAMBLE

     The purpose of this License is to make a manual, textbook, or other
     written document "free" in the sense of freedom: to assure everyone
     the effective freedom to copy and redistribute it, with or without
     modifying it, either commercially or noncommercially.  Secondarily,
     this License preserves for the author and publisher a way to get
     credit for their work, while not being considered responsible for
     modifications made by others.

     This License is a kind of "copyleft", which means that derivative
     works of the document must themselves be free in the same sense.
     It complements the GNU General Public License, which is a copyleft
     license designed for free software.

     We have designed this License in order to use it for manuals for
     free software, because free software needs free documentation: a
     free program should come with manuals providing the same freedoms
     that the software does.  But this License is not limited to
     software manuals; it can be used for any textual work, regardless
     of subject matter or whether it is published as a printed book.
     We recommend this License principally for works whose purpose is
     instruction or reference.


  1. APPLICABILITY AND DEFINITIONS

     This License applies to any manual or other work that contains a
     notice placed by the copyright holder saying it can be distributed
     under the terms of this License.  The "Document", below, refers to
     any such manual or work.  Any member of the public is a licensee,
     and is addressed as "you".

     A "Modified Version" of the Document means any work containing the
     Document or a portion of it, either copied verbatim, or with
     modifications and/or translated into another language.

     A "Secondary Section" is a named appendix or a front-matter
     section of the Document that deals exclusively with the
     relationship of the publishers or authors of the Document to the
     Document's overall subject (or to related matters) and contains
     nothing that could fall directly within that overall subject.
     (For example, if the Document is in part a textbook of
     mathematics, a Secondary Section may not explain any mathematics.)
     The relationship could be a matter of historical connection with
     the subject or with related matters, or of legal, commercial,
     philosophical, ethical or political position regarding them.

     The "Invariant Sections" are certain Secondary Sections whose
     titles are designated, as being those of Invariant Sections, in
     the notice that says that the Document is released under this
     License.

     The "Cover Texts" are certain short passages of text that are
     listed, as Front-Cover Texts or Back-Cover Texts, in the notice
     that says that the Document is released under this License.

     A "Transparent" copy of the Document means a machine-readable copy,
     represented in a format whose specification is available to the
     general public, whose contents can be viewed and edited directly
     and straightforwardly with generic text editors or (for images
     composed of pixels) generic paint programs or (for drawings) some
     widely available drawing editor, and that is suitable for input to
     text formatters or for automatic translation to a variety of
     formats suitable for input to text formatters.  A copy made in an
     otherwise Transparent file format whose markup has been designed
     to thwart or discourage subsequent modification by readers is not
     Transparent.  A copy that is not "Transparent" is called "Opaque".

     Examples of suitable formats for Transparent copies include plain
     ASCII without markup, Texinfo input format, LaTeX input format,
     SGML or XML using a publicly available DTD, and
     standard-conforming simple HTML designed for human modification.
     Opaque formats include PostScript, PDF, proprietary formats that
     can be read and edited only by proprietary word processors, SGML
     or XML for which the DTD and/or processing tools are not generally
     available, and the machine-generated HTML produced by some word
     processors for output purposes only.

     The "Title Page" means, for a printed book, the title page itself,
     plus such following pages as are needed to hold, legibly, the
     material this License requires to appear in the title page.  For
     works in formats which do not have any title page as such, "Title
     Page" means the text near the most prominent appearance of the
     work's title, preceding the beginning of the body of the text.

  2. VERBATIM COPYING

     You may copy and distribute the Document in any medium, either
     commercially or noncommercially, provided that this License, the
     copyright notices, and the license notice saying this License
     applies to the Document are reproduced in all copies, and that you
     add no other conditions whatsoever to those of this License.  You
     may not use technical measures to obstruct or control the reading
     or further copying of the copies you make or distribute.  However,
     you may accept compensation in exchange for copies.  If you
     distribute a large enough number of copies you must also follow
     the conditions in section 3.

     You may also lend copies, under the same conditions stated above,
     and you may publicly display copies.

  3. COPYING IN QUANTITY

     If you publish printed copies of the Document numbering more than
     100, and the Document's license notice requires Cover Texts, you
     must enclose the copies in covers that carry, clearly and legibly,
     all these Cover Texts: Front-Cover Texts on the front cover, and
     Back-Cover Texts on the back cover.  Both covers must also clearly
     and legibly identify you as the publisher of these copies.  The
     front cover must present the full title with all words of the
     title equally prominent and visible.  You may add other material
     on the covers in addition.  Copying with changes limited to the
     covers, as long as they preserve the title of the Document and
     satisfy these conditions, can be treated as verbatim copying in
     other respects.

     If the required texts for either cover are too voluminous to fit
     legibly, you should put the first ones listed (as many as fit
     reasonably) on the actual cover, and continue the rest onto
     adjacent pages.

     If you publish or distribute Opaque copies of the Document
     numbering more than 100, you must either include a
     machine-readable Transparent copy along with each Opaque copy, or
     state in or with each Opaque copy a publicly-accessible
     computer-network location containing a complete Transparent copy
     of the Document, free of added material, which the general
     network-using public has access to download anonymously at no
     charge using public-standard network protocols.  If you use the
     latter option, you must take reasonably prudent steps, when you
     begin distribution of Opaque copies in quantity, to ensure that
     this Transparent copy will remain thus accessible at the stated
     location until at least one year after the last time you
     distribute an Opaque copy (directly or through your agents or
     retailers) of that edition to the public.

     It is requested, but not required, that you contact the authors of
     the Document well before redistributing any large number of
     copies, to give them a chance to provide you with an updated
     version of the Document.

  4. MODIFICATIONS

     You may copy and distribute a Modified Version of the Document
     under the conditions of sections 2 and 3 above, provided that you
     release the Modified Version under precisely this License, with
     the Modified Version filling the role of the Document, thus
     licensing distribution and modification of the Modified Version to
     whoever possesses a copy of it.  In addition, you must do these
     things in the Modified Version:

       A. Use in the Title Page (and on the covers, if any) a title
          distinct from that of the Document, and from those of
          previous versions (which should, if there were any, be listed
          in the History section of the Document).  You may use the
          same title as a previous version if the original publisher of
          that version gives permission.

       B. List on the Title Page, as authors, one or more persons or
          entities responsible for authorship of the modifications in
          the Modified Version, together with at least five of the
          principal authors of the Document (all of its principal
          authors, if it has less than five).

       C. State on the Title page the name of the publisher of the
          Modified Version, as the publisher.

       D. Preserve all the copyright notices of the Document.

       E. Add an appropriate copyright notice for your modifications
          adjacent to the other copyright notices.

       F. Include, immediately after the copyright notices, a license
          notice giving the public permission to use the Modified
          Version under the terms of this License, in the form shown in
          the Addendum below.

       G. Preserve in that license notice the full lists of Invariant
          Sections and required Cover Texts given in the Document's
          license notice.

       H. Include an unaltered copy of this License.

       I. Preserve the section entitled "History", and its title, and
          add to it an item stating at least the title, year, new
          authors, and publisher of the Modified Version as given on
          the Title Page.  If there is no section entitled "History" in
          the Document, create one stating the title, year, authors,
          and publisher of the Document as given on its Title Page,
          then add an item describing the Modified Version as stated in
          the previous sentence.

       J. Preserve the network location, if any, given in the Document
          for public access to a Transparent copy of the Document, and
          likewise the network locations given in the Document for
          previous versions it was based on.  These may be placed in
          the "History" section.  You may omit a network location for a
          work that was published at least four years before the
          Document itself, or if the original publisher of the version
          it refers to gives permission.

       K. In any section entitled "Acknowledgements" or "Dedications",
          preserve the section's title, and preserve in the section all
          the substance and tone of each of the contributor
          acknowledgements and/or dedications given therein.

       L. Preserve all the Invariant Sections of the Document,
          unaltered in their text and in their titles.  Section numbers
          or the equivalent are not considered part of the section
          titles.

       M. Delete any section entitled "Endorsements".  Such a section
          may not be included in the Modified Version.

       N. Do not retitle any existing section as "Endorsements" or to
          conflict in title with any Invariant Section.

     If the Modified Version includes new front-matter sections or
     appendices that qualify as Secondary Sections and contain no
     material copied from the Document, you may at your option
     designate some or all of these sections as invariant.  To do this,
     add their titles to the list of Invariant Sections in the Modified
     Version's license notice.  These titles must be distinct from any
     other section titles.

     You may add a section entitled "Endorsements", provided it contains
     nothing but endorsements of your Modified Version by various
     parties-for example, statements of peer review or that the text has
     been approved by an organization as the authoritative definition
     of a standard.

     You may add a passage of up to five words as a Front-Cover Text,
     and a passage of up to 25 words as a Back-Cover Text, to the end
     of the list of Cover Texts in the Modified Version.  Only one
     passage of Front-Cover Text and one of Back-Cover Text may be
     added by (or through arrangements made by) any one entity.  If the
     Document already includes a cover text for the same cover,
     previously added by you or by arrangement made by the same entity
     you are acting on behalf of, you may not add another; but you may
     replace the old one, on explicit permission from the previous
     publisher that added the old one.

     The author(s) and publisher(s) of the Document do not by this
     License give permission to use their names for publicity for or to
     assert or imply endorsement of any Modified Version.

  5. COMBINING DOCUMENTS

     You may combine the Document with other documents released under
     this License, under the terms defined in section 4 above for
     modified versions, provided that you include in the combination
     all of the Invariant Sections of all of the original documents,
     unmodified, and list them all as Invariant Sections of your
     combined work in its license notice.

     The combined work need only contain one copy of this License, and
     multiple identical Invariant Sections may be replaced with a single
     copy.  If there are multiple Invariant Sections with the same name
     but different contents, make the title of each such section unique
     by adding at the end of it, in parentheses, the name of the
     original author or publisher of that section if known, or else a
     unique number.  Make the same adjustment to the section titles in
     the list of Invariant Sections in the license notice of the
     combined work.

     In the combination, you must combine any sections entitled
     "History" in the various original documents, forming one section
     entitled "History"; likewise combine any sections entitled
     "Acknowledgements", and any sections entitled "Dedications".  You
     must delete all sections entitled "Endorsements."

  6. COLLECTIONS OF DOCUMENTS

     You may make a collection consisting of the Document and other
     documents released under this License, and replace the individual
     copies of this License in the various documents with a single copy
     that is included in the collection, provided that you follow the
     rules of this License for verbatim copying of each of the
     documents in all other respects.

     You may extract a single document from such a collection, and
     distribute it individually under this License, provided you insert
     a copy of this License into the extracted document, and follow
     this License in all other respects regarding verbatim copying of
     that document.

  7. AGGREGATION WITH INDEPENDENT WORKS

     A compilation of the Document or its derivatives with other
     separate and independent documents or works, in or on a volume of
     a storage or distribution medium, does not as a whole count as a
     Modified Version of the Document, provided no compilation
     copyright is claimed for the compilation.  Such a compilation is
     called an "aggregate", and this License does not apply to the
     other self-contained works thus compiled with the Document, on
     account of their being thus compiled, if they are not themselves
     derivative works of the Document.

     If the Cover Text requirement of section 3 is applicable to these
     copies of the Document, then if the Document is less than one
     quarter of the entire aggregate, the Document's Cover Texts may be
     placed on covers that surround only the Document within the
     aggregate.  Otherwise they must appear on covers around the whole
     aggregate.

  8. TRANSLATION

     Translation is considered a kind of modification, so you may
     distribute translations of the Document under the terms of section
     4.  Replacing Invariant Sections with translations requires special
     permission from their copyright holders, but you may include
     translations of some or all Invariant Sections in addition to the
     original versions of these Invariant Sections.  You may include a
     translation of this License provided that you also include the
     original English version of this License.  In case of a
     disagreement between the translation and the original English
     version of this License, the original English version will prevail.

  9. TERMINATION

     You may not copy, modify, sublicense, or distribute the Document
     except as expressly provided for under this License.  Any other
     attempt to copy, modify, sublicense or distribute the Document is
     void, and will automatically terminate your rights under this
     License.  However, parties who have received copies, or rights,
     from you under this License will not have their licenses
     terminated so long as such parties remain in full compliance.

 10. FUTURE REVISIONS OF THIS LICENSE

     The Free Software Foundation may publish new, revised versions of
     the GNU Free Documentation License from time to time.  Such new
     versions will be similar in spirit to the present version, but may
     differ in detail to address new problems or concerns.  See
     `http://www.gnu.org/copyleft/'.

     Each version of the License is given a distinguishing version
     number.  If the Document specifies that a particular numbered
     version of this License "or any later version" applies to it, you
     have the option of following the terms and conditions either of
     that specified version or of any later version that has been
     published (not as a draft) by the Free Software Foundation.  If
     the Document does not specify a version number of this License,
     you may choose any version ever published (not as a draft) by the
     Free Software Foundation.


ADDENDUM: How to use this License for your documents
====================================================

   To use this License in a document you have written, include a copy of
the License in the document and put the following copyright and license
notices just after the title page:


       Copyright (C)  YEAR  YOUR NAME.
       Permission is granted to copy, distribute and/or modify this document
       under the terms of the GNU Free Documentation License, Version 1.1
       or any later version published by the Free Software Foundation;
       with the Invariant Sections being LIST THEIR TITLES, with the
       Front-Cover Texts being LIST, and with the Back-Cover Texts being LIST.
       A copy of the license is included in the section entitled ``GNU
       Free Documentation License''.
If you have no Invariant Sections, write "with no Invariant
Sections" instead of saying which ones are invariant.  If you have no
Front-Cover Texts, write "no Front-Cover Texts" instead of "Front-Cover
Texts being LIST"; likewise for Back-Cover Texts.

   If your document contains nontrivial examples of program code, we
recommend releasing these examples in parallel under your choice of
free software license, such as the GNU General Public License, to
permit their use in free software.


File: gawk.info,  Node: Index,  Prev: GNU Free Documentation License,  Up: Top

Index
*****

* Menu:

* ! (exclamation point), !  operator:    Boolean Ops.
* ! (exclamation point), ! operator <1>: Precedence.
* ! (exclamation point), ! operator:     Egrep Program.
* ! (exclamation point), != operator <1>: Typing and Comparison.
* ! (exclamation point), != operator:    Precedence.
* ! (exclamation point), !~ operator <1>: Precedence.
* ! (exclamation point), !~ operator <2>: Case-sensitivity.
* ! (exclamation point), !~ operator <3>: Computed Regexps.
* ! (exclamation point), !~ operator <4>: Regexp Usage.
* ! (exclamation point), !~ operator <5>: Typing and Comparison.
* ! (exclamation point), !~ operator <6>: Regexp Constants.
* ! (exclamation point), !~ operator <7>: Expression Patterns.
* ! (exclamation point), !~ operator:    Typing and Comparison.
* ! operator <1>:                        Egrep Program.
* ! operator:                            Ranges.
* " (double quote) <1>:                  Quoting.
* " (double quote):                      Read Terminal.
* " (double quote), regexp constants:    Computed Regexps.
* # (number sign), #! (executable scripts): Executable Scripts.
* # (number sign), #! (executable scripts), portability issues with: Executable Scripts.
* # (number sign), commenting:           Comments.
* $ (dollar sign):                       Regexp Operators.
* $ (dollar sign), $ field operator <1>: Precedence.
* $ (dollar sign), $ field operator:     Fields.
* $ (dollar sign), incrementing fields and arrays: Increment Ops.
* $ field operator:                      Fields.
* % (percent sign), % operator:          Precedence.
* % (percent sign), %= operator <1>:     Assignment Ops.
* % (percent sign), %= operator:         Precedence.
* & (ampersand), && operator <1>:        Precedence.
* & (ampersand), && operator:            Boolean Ops.
* & (ampersand), gsub/gensub/sub functions and: Gory Details.
* ' (single quote) <1>:                  Quoting.
* ' (single quote) <2>:                  One-shot.
* ' (single quote):                      Long.
* ' (single quote), vs. apostrophe:      Comments.
* ' (single quote), with double quotes:  Quoting.
* () (parentheses):                      Regexp Operators.
* () (parentheses), pgawk program:       Profiling.
* * (asterisk), * operator, as multiplication operator: Precedence.
* * (asterisk), * operator, as regexp operator: Regexp Operators.
* * (asterisk), * operator, null strings, matching: Gory Details.
* * (asterisk), ** operator <1>:         Precedence.
* * (asterisk), ** operator <2>:         Arithmetic Ops.
* * (asterisk), ** operator:             Options.
* * (asterisk), **= operator <1>:        Assignment Ops.
* * (asterisk), **= operator <2>:        Options.
* * (asterisk), **= operator:            Precedence.
* * (asterisk), *= operator <1>:         Assignment Ops.
* * (asterisk), *= operator:             Precedence.
* + (plus sign):                         Regexp Operators.
* + (plus sign), + operator:             Precedence.
* + (plus sign), ++ operator <1>:        Increment Ops.
* + (plus sign), ++ operator:            Precedence.
* + (plus sign), += operator <1>:        Precedence.
* + (plus sign), += operator:            Assignment Ops.
* + (plus sign), decrement/increment operators: Increment Ops.
* , (comma), in range patterns:          Ranges.
* - (hyphen), - operator:                Precedence.
* - (hyphen), -- (decrement/increment) operator: Precedence.
* - (hyphen), -- operator:               Increment Ops.
* - (hyphen), -= operator <1>:           Precedence.
* - (hyphen), -= operator:               Assignment Ops.
* - (hyphen), filenames beginning with:  Options.
* - (hyphen), in character lists:        Character Lists.
* --assign option:                       Options.
* --compat option:                       Options.
* --copyleft option:                     Options.
* --copyright option:                    Options.
* --disable-nls configuration option:    Additional Configuration Options.
* --dump-variables option <1>:           Options.
* --dump-variables option:               Library Names.
* --enable-portals configuration option <1>: Additional Configuration Options.
* --enable-portals configuration option: Portal Files.
* --field-separator option:              Options.
* --file option:                         Options.
* --gen-po option <1>:                   String Extraction.
* --gen-po option <2>:                   Options.
* --gen-po option:                       String Extraction.
* --help option:                         Options.
* --lint option <1>:                     Command Line.
* --lint option:                         Options.
* --lint-old option:                     Options.
* --non-decimal-data option <1>:         Nondecimal Data.
* --non-decimal-data option:             Options.
* --non-decimal-data option, strtonum function and: Nondecimal Data.
* --posix option:                        Options.
* --posix option, --traditional option and: Options.
* --profile option <1>:                  Profiling.
* --profile option:                      Options.
* --re-interval option:                  Options.
* --source option:                       Options.
* --traditional option:                  Options.
* --traditional option, --posix option and: Options.
* --usage option:                        Options.
* --version option:                      Options.
* --with-included-gettext configuration option <1>: Gawk I18N.
* --with-included-gettext configuration option: Additional Configuration Options.
* --with-included-gettext configuration option, configuring gawk with: Additional Configuration Options.
* -F option:                             Options.
* -f option:                             Long.
* -F option:                             Command Line Field Separator.
* -f option:                             Options.
* -F option, -Ft sets FS to TAB:         Options.
* -f option, on command line:            Options.
* -F option, troubleshooting:            Known Bugs.
* -mf/-mr options:                       Options.
* -v option:                             Options.
* -v option, variables, assigning:       Assignment Options.
* -W option:                             Options.
* . (period):                            Regexp Operators.
* .mo files:                             Explaining gettext.
* .mo files, converting from .po:        I18N Example.
* .mo files, specifying directory of <1>: Programmer i18n.
* .mo files, specifying directory of:    Explaining gettext.
* .po files <1>:                         Translator i18n.
* .po files:                             Explaining gettext.
* .po files, converting to .mo:          I18N Example.
* / (forward slash):                     Regexp.
* / (forward slash), / operator:         Precedence.
* / (forward slash), /= operator <1>:    Precedence.
* / (forward slash), /= operator:        Assignment Ops.
* / (forward slash), /= operator, vs. /=.../ regexp constant: Assignment Ops.
* / (forward slash), patterns and:       Expression Patterns.
* /= operator vs. /=.../ regexp constant: Assignment Ops.
* /dev/... special files (gawk):         Special FD.
* /inet/ files (gawk):                   TCP/IP Networking.
* /p files (gawk):                       Portal Files.
* ; (semicolon):                         Statements/Lines.
* ; (semicolon), AWKPATH variable and:   PC Using.
* ; (semicolon), separating statements in actions <1>: Statements.
* ; (semicolon), separating statements in actions: Action Overview.
* < (left angle bracket), < operator <1>: Precedence.
* < (left angle bracket), < operator:    Typing and Comparison.
* < (left angle bracket), < operator (I/O): Getline/File.
* < (left angle bracket), <= operator <1>: Typing and Comparison.
* < (left angle bracket), <= operator:   Precedence.
* = (equals sign), = operator:           Assignment Ops.
* = (equals sign), == operator <1>:      Precedence.
* = (equals sign), == operator:          Typing and Comparison.
* > (right angle bracket), > operator <1>: Typing and Comparison.
* > (right angle bracket), > operator:   Precedence.
* > (right angle bracket), > operator (I/O): Redirection.
* > (right angle bracket), >= operator <1>: Precedence.
* > (right angle bracket), >= operator:  Typing and Comparison.
* > (right angle bracket), >> operator (I/O) <1>: Precedence.
* > (right angle bracket), >> operator (I/O): Redirection.
* ? (question mark) <1>:                 GNU Regexp Operators.
* ? (question mark):                     Regexp Operators.
* ? (question mark), ?: operator:        Precedence.
* [] (square brackets):                  Regexp Operators.
* \ (backslash) <1>:                     Read Terminal.
* \ (backslash) <2>:                     Regexp Operators.
* \ (backslash) <3>:                     Quoting.
* \ (backslash):                         Comments.
* \ (backslash), \" escape sequence:     Escape Sequences.
* \ (backslash), \' operator (gawk):     GNU Regexp Operators.
* \ (backslash), \/ escape sequence:     Escape Sequences.
* \ (backslash), \< operator (gawk):     GNU Regexp Operators.
* \ (backslash), \> operator (gawk):     GNU Regexp Operators.
* \ (backslash), \` operator (gawk):     GNU Regexp Operators.
* \ (backslash), \a escape sequence:     Escape Sequences.
* \ (backslash), \b escape sequence:     Escape Sequences.
* \ (backslash), \B operator (gawk):     GNU Regexp Operators.
* \ (backslash), \f escape sequence:     Escape Sequences.
* \ (backslash), \n escape sequence:     Escape Sequences.
* \ (backslash), \NNN escape sequence:   Escape Sequences.
* \ (backslash), \r escape sequence:     Escape Sequences.
* \ (backslash), \t escape sequence:     Escape Sequences.
* \ (backslash), \v escape sequence:     Escape Sequences.
* \ (backslash), \w operator (gawk):     GNU Regexp Operators.
* \ (backslash), \W operator (gawk):     GNU Regexp Operators.
* \ (backslash), \x escape sequence:     Escape Sequences.
* \ (backslash), \y operator (gawk):     GNU Regexp Operators.
* \ (backslash), as field separators:    Command Line Field Separator.
* \ (backslash), continuing lines and <1>: Egrep Program.
* \ (backslash), continuing lines and:   Statements/Lines.
* \ (backslash), continuing lines and, comments and: Statements/Lines.
* \ (backslash), continuing lines and, in csh <1>: More Complex.
* \ (backslash), continuing lines and, in csh: Statements/Lines.
* \ (backslash), gsub/gensub/sub functions and: Gory Details.
* \ (backslash), in character lists:     Character Lists.
* \ (backslash), in escape sequences:    Escape Sequences.
* \ (backslash), in escape sequences, POSIX and: Escape Sequences.
* \ (backslash), regexp constants:       Computed Regexps.
* ^ (caret) <1>:                         GNU Regexp Operators.
* ^ (caret):                             Regexp Operators.
* ^ (caret), ^ operator <1>:             Precedence.
* ^ (caret), ^ operator:                 Options.
* ^ (caret), ^= operator <1>:            Options.
* ^ (caret), ^= operator <2>:            Precedence.
* ^ (caret), ^= operator:                Assignment Ops.
* ^ (caret), in character lists:         Character Lists.
* _ (underscore), _ C macro:             Explaining gettext.
* _ (underscore), in names of private variables: Library Names.
* _ (underscore), translatable string:   Programmer i18n.
* _gr_init user-defined function:        Group Functions.
* _pw_init user-defined function:        Passwd Functions.
* accessing fields:                      Fields.
* account information <1>:               Group Functions.
* account information:                   Passwd Functions.
* actions:                               Action Overview.
* actions, control statements in:        Statements.
* actions, default:                      Very Simple.
* actions, empty:                        Very Simple.
* adding, features to gawk:              Adding Code.
* adding, fields:                        Changing Fields.
* adding, functions to gawk:             Dynamic Extensions.
* advanced features, buffering:          I/O Functions.
* advanced features, close function:     Close Files And Pipes.
* advanced features, constants, values of: Nondecimal-numbers.
* advanced features, data files as single record: Records.
* advanced features, fixed-width data:   Constant Size.
* advanced features, FNR/NR variables:   Auto-set.
* advanced features, gawk:               Advanced Features.
* advanced features, gawk, BSD portals:  Portal Files.
* advanced features, gawk, network programming: TCP/IP Networking.
* advanced features, gawk, nondecimal input data: Nondecimal Data.
* advanced features, gawk, processes, communicating with: Two-way I/O.
* advanced features, network connections, See Also networks, connections: Advanced Features.
* advanced features, null strings, matching: Gory Details.
* advanced features, operators, precedence: Increment Ops.
* advanced features, piping into sh:     Redirection.
* advanced features, regexp constants:   Assignment Ops.
* Aho, Alfred <1>:                       Contributors.
* Aho, Alfred:                           History.
* alarm clock example program:           Alarm Program.
* alarm.awk program:                     Alarm Program.
* algorithms:                            Basic High Level.
* Alpha (DEC):                           Manual History.
* amazing awk assembler (aaa):           Glossary.
* amazingly workable formatter (awf):    Glossary.
* ambiguity, syntactic: /= operator vs. /=.../ regexp constant: Assignment Ops.
* amiga:                                 Amiga Installation.
* ampersand (&), && operator:            Boolean Ops.
* ampersand (&), &&operator:             Precedence.
* ampersand (&), gsub/gensub/sub functions and: Gory Details.
* AND bitwise operation:                 Bitwise Functions.
* and Boolean-logic operator:            Boolean Ops.
* and function (gawk):                   Bitwise Functions.
* ANSI:                                  Glossary.
* archeologists:                         Bugs.
* ARGC/ARGV variables <1>:               Auto-set.
* ARGC/ARGV variables:                   ARGC and ARGV.
* ARGC/ARGV variables, command-line arguments: Other Arguments.
* ARGC/ARGV variables, portability and:  Executable Scripts.
* ARGIND variable:                       Auto-set.
* ARGIND variable, command-line arguments: Other Arguments.
* arguments, command-line <1>:           Other Arguments.
* arguments, command-line <2>:           Auto-set.
* arguments, command-line:               ARGC and ARGV.
* arguments, command-line, invoking awk: Command Line.
* arguments, in function calls:          Function Calls.
* arguments, processing:                 Getopt Function.
* arguments, retrieving:                 Internals.
* arithmetic operators:                  Arithmetic Ops.
* arrays:                                Arrays.
* arrays, as parameters to functions:    Function Caveats.
* arrays, associative:                   Array Intro.
* arrays, associative, clearing:         Internals.
* arrays, associative, library functions and: Library Names.
* arrays, deleting entire contents:      Delete.
* arrays, elements, assigning:           Assigning Elements.
* arrays, elements, deleting:            Delete.
* arrays, elements, installing:          Internals.
* arrays, elements, order of:            Scanning an Array.
* arrays, elements, referencing:         Reference to Elements.
* arrays, elements, retrieving number of: String Functions.
* arrays, for statement and:             Scanning an Array.
* arrays, IGNORECASE variable and:       Array Intro.
* arrays, indexing:                      Array Intro.
* arrays, merging into strings:          Join Function.
* arrays, multidimensional:              Multi-dimensional.
* arrays, multidimensional, scanning:    Multi-scanning.
* arrays, names of:                      Arrays.
* arrays, scanning:                      Scanning an Array.
* arrays, sorting:                       Array Sorting.
* arrays, sorting, IGNORECASE variable and: Array Sorting.
* arrays, sparse:                        Array Intro.
* arrays, subscripts:                    Numeric Array Subscripts.
* arrays, subscripts, uninitialized variables as: Uninitialized Subscripts.
* artificial intelligence, gawk and:     Distribution contents.
* ASCII:                                 Ordinal Functions.
* asort function (gawk) <1>:             Array Sorting.
* asort function (gawk):                 String Functions.
* asort function (gawk), arrays, sorting: Array Sorting.
* assert function (C library):           Assert Function.
* assert user-defined function:          Assert Function.
* assertions:                            Assert Function.
* assignment operators:                  Assignment Ops.
* assignment operators, evaluation order: Assignment Ops.
* assignment operators, lvalues/rvalues: Assignment Ops.
* assignments as filenames:              Ignoring Assigns.
* assoc_clear internal function:         Internals.
* assoc_lookup internal function:        Internals.
* associative arrays:                    Array Intro.
* asterisk (*), * operator, as multiplication operator: Precedence.
* asterisk (*), * operator, as regexp operator: Regexp Operators.
* asterisk (*), * operator, null strings, matching: Gory Details.
* asterisk (*), ** operator <1>:         Options.
* asterisk (*), ** operator <2>:         Arithmetic Ops.
* asterisk (*), ** operator:             Precedence.
* asterisk (*), **= operator <1>:        Precedence.
* asterisk (*), **= operator <2>:        Assignment Ops.
* asterisk (*), **= operator:            Options.
* asterisk (*), *= operator <1>:         Assignment Ops.
* asterisk (*), *= operator:             Precedence.
* atan2 function:                        Numeric Functions.
* atari:                                 Atari Installation.
* awf (amazingly workable formatter) program: Glossary.
* awk language, POSIX version:           Assignment Ops.
* awk programs <1>:                      Executable Scripts.
* awk programs <2>:                      Two Rules.
* awk programs:                          Getting Started.
* awk programs, complex:                 When.
* awk programs, documenting <1>:         Comments.
* awk programs, documenting:             Library Names.
* awk programs, examples of:             Sample Programs.
* awk programs, execution of:            Next Statement.
* awk programs, internationalizing <1>:  I18N Functions.
* awk programs, internationalizing:      Programmer i18n.
* awk programs, lengthy:                 Long.
* awk programs, lengthy, assertions:     Assert Function.
* awk programs, location of:             Options.
* awk programs, one-line examples:       Very Simple.
* awk programs, profiling:               Profiling.
* awk programs, profiling, enabling:     Options.
* awk programs, running <1>:             Long.
* awk programs, running:                 Running gawk.
* awk programs, running, from shell scripts: One-shot.
* awk programs, running, without input files: Read Terminal.
* awk programs, shell variables in:      Using Shell Variables.
* awk, function of:                      Getting Started.
* awk, gawk and <1>:                     This Manual.
* awk, gawk and:                         Preface.
* awk, history of:                       History.
* awk, implementation issues, pipes:     Redirection.
* awk, implementations:                  Other Versions.
* awk, implementations, limits:          Getline Notes.
* awk, invoking:                         Command Line.
* awk, new vs. old:                      Names.
* awk, new vs. old, OFMT variable:       Conversion.
* awk, POSIX and:                        Preface.
* awk, POSIX and, See Also POSIX awk:    Preface.
* awk, regexp constants and:             Typing and Comparison.
* awk, See Also gawk:                    Preface.
* awk, terms describing:                 This Manual.
* awk, uses for <1>:                     Getting Started.
* awk, uses for <2>:                     When.
* awk, uses for:                         Preface.
* awk, versions of <1>:                  Names.
* awk, versions of:                      V7/SVR3.1.
* awk, versions of, changes between SVR3.1 and SVR4: SVR4.
* awk, versions of, changes between SVR4 and POSIX awk: POSIX.
* awk, versions of, changes between V7 and SVR3.1: V7/SVR3.1.
* awk, versions of, See Also Bell Laboratories awk: BTL.
* awk.h file (internal):                 Internals.
* awka compiler for awk:                 Other Versions.
* AWKNUM internal type:                  Internals.
* AWKPATH environment variable <1>:      AWKPATH Variable.
* AWKPATH environment variable:          PC Using.
* awkprof.out file:                      Profiling.
* awksed.awk program:                    Simple Sed.
* awkvars.out file:                      Options.
* backslash (\) <1>:                     Read Terminal.
* backslash (\) <2>:                     Comments.
* backslash (\) <3>:                     Regexp Operators.
* backslash (\):                         Quoting.
* backslash (\), \" escape sequence:     Escape Sequences.
* backslash (\), \' operator (gawk):     GNU Regexp Operators.
* backslash (\), \/ escape sequence:     Escape Sequences.
* backslash (\), \< operator (gawk):     GNU Regexp Operators.
* backslash (\), \> operator (gawk):     GNU Regexp Operators.
* backslash (\), \` operator (gawk):     GNU Regexp Operators.
* backslash (\), \a escape sequence:     Escape Sequences.
* backslash (\), \b escape sequence:     Escape Sequences.
* backslash (\), \B operator (gawk):     GNU Regexp Operators.
* backslash (\), \f escape sequence:     Escape Sequences.
* backslash (\), \n escape sequence:     Escape Sequences.
* backslash (\), \NNN escape sequence:   Escape Sequences.
* backslash (\), \r escape sequence:     Escape Sequences.
* backslash (\), \t escape sequence:     Escape Sequences.
* backslash (\), \v escape sequence:     Escape Sequences.
* backslash (\), \W operator (gawk):     GNU Regexp Operators.
* backslash (\), \w operator (gawk):     GNU Regexp Operators.
* backslash (\), \x escape sequence:     Escape Sequences.
* backslash (\), \y operator (gawk):     GNU Regexp Operators.
* backslash (\), as field separators:    Command Line Field Separator.
* backslash (\), continuing lines and <1>: Statements/Lines.
* backslash (\), continuing lines and:   Egrep Program.
* backslash (\), continuing lines and, comments and: Statements/Lines.
* backslash (\), continuing lines and, in csh <1>: More Complex.
* backslash (\), continuing lines and, in csh: Statements/Lines.
* backslash (\), gsub/gensub/sub functions and: Gory Details.
* backslash (\), in character lists:     Character Lists.
* backslash (\), in escape sequences:    Escape Sequences.
* backslash (\), in escape sequences, POSIX and: Escape Sequences.
* backslash (\), regexp constants:       Computed Regexps.
* BBS-list file:                         Sample Data Files.
* Beebe, Nelson:                         Acknowledgments.
* BEGIN pattern <1>:                     BEGIN/END.
* BEGIN pattern <2>:                     Records.
* BEGIN pattern:                         Field Separators.
* BEGIN pattern, assert user-defined function and: Assert Function.
* BEGIN pattern, Boolean patterns and:   Expression Patterns.
* BEGIN pattern, exit statement and:     Exit Statement.
* BEGIN pattern, getline and:            Getline Notes.
* BEGIN pattern, headings, adding:       Print Examples.
* BEGIN pattern, next/nextfile statements and <1>: Next Statement.
* BEGIN pattern, next/nextfile statements and: I/O And BEGIN/END.
* BEGIN pattern, OFS/ORS variables, assigning values to: Output Separators.
* BEGIN pattern, operators and:          Using BEGIN/END.
* BEGIN pattern, pgawk program:          Profiling.
* BEGIN pattern, print statement and:    I/O And BEGIN/END.
* BEGIN pattern, pwcat program:          Passwd Functions.
* BEGIN pattern, running awk programs and: Cut Program.
* BEGIN pattern, TEXTDOMAIN variable and: Programmer i18n.
* beginfile user-defined function:       Filetrans Function.
* Bell Laboratories awk extensions:      BTL.
* BeOS:                                  BeOS Installation.
* Berry, Karl:                           Acknowledgments.
* binary input/output:                   User-modified.
* bindtextdomain function (C library):   Explaining gettext.
* bindtextdomain function (gawk) <1>:    I18N Functions.
* bindtextdomain function (gawk):        Programmer i18n.
* bindtextdomain function (gawk), portability and: I18N Portability.
* BINMODE variable <1>:                  PC Using.
* BINMODE variable:                      User-modified.
* bits2str user-defined function:        Bitwise Functions.
* bitwise, complement:                   Bitwise Functions.
* bitwise, operations:                   Bitwise Functions.
* bitwise, shift:                        Bitwise Functions.
* body, in actions:                      Statements.
* body, in loops:                        While Statement.
* Boolean expressions:                   Boolean Ops.
* Boolean expressions, as patterns:      Expression Patterns.
* Boolean operators, See Boolean expressions: Boolean Ops.
* Bourne shell, quoting rules for:       Quoting.
* braces ({}), actions and:              Action Overview.
* braces ({}), pgawk program:            Profiling.
* braces ({}), statements, grouping:     Statements.
* bracket expressions, See character lists: Regexp Operators.
* break statement:                       Break Statement.
* Brennan, Michael <1>:                  Other Versions.
* Brennan, Michael <2>:                  Simple Sed.
* Brennan, Michael <3>:                  Delete.
* Brennan, Michael <4>:                  Other Versions.
* Brennan, Michael:                      Two-way I/O.
* Broder, Alan J.:                       Contributors.
* Brown, Martin <1>:                     Acknowledgments.
* Brown, Martin <2>:                     Contributors.
* Brown, Martin:                         Bugs.
* BSD portals:                           Portal Files.
* BSD-based operating systems:           Glossary.
* Buening, Andreas <1>:                  Contributors.
* Buening, Andreas:                      Acknowledgments.
* buffering, input/output <1>:           I/O Functions.
* buffering, input/output:               Two-way I/O.
* buffering, interactive vs. noninteractive: I/O Functions.
* buffers, flushing:                     I/O Functions.
* buffers, operators for:                GNU Regexp Operators.
* bug reports, email address, bug-gawk@gnu.org: Bugs.
* bug-gawk@gnu.org bug reporting address: Bugs.
* built-in functions:                    Functions.
* built-in functions, evaluation order:  Calling Built-in.
* built-in variables:                    Built-in Variables.
* built-in variables, -v option, setting with: Options.
* built-in variables, conveying information: Auto-set.
* built-in variables, user-modifiable:   User-modified.
* call by reference:                     Function Caveats.
* call by value:                         Function Caveats.
* caret (^) <1>:                         Regexp Operators.
* caret (^):                             GNU Regexp Operators.
* caret (^), ^ operator <1>:             Options.
* caret (^), ^ operator:                 Precedence.
* caret (^), ^= operator <1>:            Options.
* caret (^), ^= operator <2>:            Precedence.
* caret (^), ^= operator:                Assignment Ops.
* caret (^), in character lists:         Character Lists.
* case sensitivity, array indices and:   Array Intro.
* case sensitivity, converting case:     String Functions.
* case sensitivity, example programs:    Library Functions.
* case sensitivity, gawk:                Case-sensitivity.
* case sensitivity, regexps and <1>:     User-modified.
* case sensitivity, regexps and:         Case-sensitivity.
* case sensitivity, string comparisons and: User-modified.
* character encodings:                   Ordinal Functions.
* character lists <1>:                   Character Lists.
* character lists:                       Regexp Operators.
* character lists, character classes:    Character Lists.
* character lists, collating elements:   Character Lists.
* character lists, collating symbols:    Character Lists.
* character lists, complemented:         Regexp Operators.
* character lists, equivalence classes:  Character Lists.
* character lists, non-ASCII:            Character Lists.
* character lists, range expressions:    Character Lists.
* character sets:                        Ordinal Functions.
* character sets (machine character encodings): Glossary.
* character sets, See Also character lists: Regexp Operators.
* characters, counting:                  Wc Program.
* characters, transliterating:           Translate Program.
* characters, values of as numbers:      Ordinal Functions.
* Chassell, Robert J.:                   Acknowledgments.
* chdir function, implementing in gawk:  Sample Library.
* chem utility:                          Glossary.
* chr user-defined function:             Ordinal Functions.
* Cliff random numbers:                  Cliff Random Function.
* cliff_rand user-defined function:      Cliff Random Function.
* close function <1>:                    Getline/Pipe.
* close function <2>:                    Close Files And Pipes.
* close function <3>:                    I/O Functions.
* close function:                        Getline/Variable/File.
* close function, return values:         Close Files And Pipes.
* close function, two-way pipes and:     Two-way I/O.
* Close, Diane <1>:                      Contributors.
* Close, Diane:                          Manual History.
* collating elements:                    Character Lists.
* collating symbols:                     Character Lists.
* columns, aligning:                     Print Examples.
* columns, cutting:                      Cut Program.
* comma (,), in range patterns:          Ranges.
* command line, arguments <1>:           Other Arguments.
* command line, arguments <2>:           ARGC and ARGV.
* command line, arguments:               Auto-set.
* command line, formats:                 Running gawk.
* command line, FS on, setting:          Command Line Field Separator.
* command line, invoking awk from:       Command Line.
* command line, options <1>:             Command Line Field Separator.
* command line, options <2>:             Options.
* command line, options:                 Long.
* command line, options, end of:         Options.
* command line, variables, assigning on: Assignment Options.
* command-line options, processing:      Getopt Function.
* command-line options, string extraction: String Extraction.
* commenting:                            Comments.
* commenting, backslash continuation and: Statements/Lines.
* comp.lang.awk newsgroup:               Bugs.
* comparison expressions:                Typing and Comparison.
* comparison expressions, as patterns:   Expression Patterns.
* comparison expressions, string vs. regexp: Typing and Comparison.
* compatibility mode (gawk), extensions: POSIX/GNU.
* compatibility mode (gawk), file names: Special Caveats.
* compatibility mode (gawk), hexadecimal numbers: Nondecimal-numbers.
* compatibility mode (gawk), octal numbers: Nondecimal-numbers.
* compatibility mode (gawk), specifying: Options.
* compiled programs <1>:                 Glossary.
* compiled programs:                     Basic High Level.
* compl function (gawk):                 Bitwise Functions.
* complement, bitwise:                   Bitwise Functions.
* compound statements, control statements and: Statements.
* concatenating:                         Concatenation.
* conditional expressions:               Conditional Exp.
* configuration option, --disable-nls:   Additional Configuration Options.
* configuration option, --enable-portals: Additional Configuration Options.
* configuration option, --with-included-gettext <1>: Additional Configuration Options.
* configuration option, --with-included-gettext: Gawk I18N.
* configuration options, gawk:           Additional Configuration Options.
* constants, nondecimal:                 Nondecimal Data.
* constants, types of:                   Constants.
* continue statement:                    Continue Statement.
* control statements:                    Statements.
* converting, case:                      String Functions.
* converting, dates to timestamps:       Time Functions.
* converting, during subscripting:       Numeric Array Subscripts.
* converting, numbers:                   Conversion.
* converting, numbers, to strings:       Bitwise Functions.
* converting, strings to numbers:        Conversion.
* CONVFMT variable <1>:                  Conversion.
* CONVFMT variable:                      User-modified.
* CONVFMT variable, array subscripts and: Numeric Array Subscripts.
* coprocesses <1>:                       Redirection.
* coprocesses:                           Two-way I/O.
* coprocesses, closing:                  Close Files And Pipes.
* coprocesses, getline from:             Getline/Coprocess.
* cos function:                          Numeric Functions.
* counting:                              Wc Program.
* csh utility:                           Statements/Lines.
* csh utility, backslash continuation and: More Complex.
* csh utility, POSIXLY_CORRECT environment variable: Options.
* csh utility, |& operator, comparison with: Two-way I/O.
* ctime user-defined function:           Function Example.
* currency symbols, localization:        Explaining gettext.
* custom.h file:                         Configuration Philosophy.
* cut utility:                           Cut Program.
* cut.awk program:                       Cut Program.
* d.c., See dark corner:                 Conventions.
* dark corner <1>:                       Assignment Ops.
* dark corner <2>:                       Glossary.
* dark corner <3>:                       Conventions.
* dark corner <4>:                       Format Modifiers.
* dark corner:                           Truth Values.
* dark corner, array subscripts:         Uninitialized Subscripts.
* dark corner, break statement:          Break Statement.
* dark corner, close function:           Close Files And Pipes.
* dark corner, command-line arguments:   Assignment Options.
* dark corner, continue statement:       Continue Statement.
* dark corner, CONVFMT variable:         Conversion.
* dark corner, escape sequences:         Other Arguments.
* dark corner, escape sequences, for metacharacters: Escape Sequences.
* dark corner, exit statement:           Exit Statement.
* dark corner, field separators:         Field Splitting Summary.
* dark corner, FILENAME variable <1>:    Getline Notes.
* dark corner, FILENAME variable:        Auto-set.
* dark corner, FNR/NR variables:         Auto-set.
* dark corner, format-control characters: Control Letters.
* dark corner, FS as null string:        Single Character Fields.
* dark corner, input files:              Records.
* dark corner, invoking awk:             Command Line.
* dark corner, multiline records:        Multiple Line.
* dark corner, NF variable, decrementing: Changing Fields.
* dark corner, OFMT variable:            OFMT.
* dark corner, regexp constants:         Using Constant Regexps.
* dark corner, regexp constants, /= operator and: Assignment Ops.
* dark corner, regexp constants, as arguments to user-defined functions: Using Constant Regexps.
* dark corner, split function:           String Functions.
* dark corner, strings, storing:         Records.
* data, fixed-width:                     Constant Size.
* data-driven languages:                 Basic High Level.
* database, group, reading:              Group Functions.
* database, users, reading:              Passwd Functions.
* date utility, GNU:                     Time Functions.
* date utility, POSIX:                   Time Functions.
* dates, converting to timestamps:       Time Functions.
* dates, information related to, localization: Explaining gettext.
* Davies, Stephen <1>:                   Bugs.
* Davies, Stephen:                       Contributors.
* dcgettext function (gawk) <1>:         Programmer i18n.
* dcgettext function (gawk):             I18N Functions.
* dcgettext function (gawk), portability and: I18N Portability.
* dcngettext function (gawk) <1>:        I18N Functions.
* dcngettext function (gawk):            Programmer i18n.
* dcngettext function (gawk), portability and: I18N Portability.
* deadlocks:                             Two-way I/O.
* debugging gawk:                        Known Bugs.
* debugging gawk, bug reports:           Bugs.
* decrement operators:                   Increment Ops.
* Deifik, Scott <1>:                     Acknowledgments.
* Deifik, Scott <2>:                     Contributors.
* Deifik, Scott:                         Bugs.
* delete statement:                      Delete.
* deleting elements in arrays:           Delete.
* deleting entire arrays:                Delete.
* differences in awk and gawk, ARGC/ARGV variables: ARGC and ARGV.
* differences in awk and gawk, ARGIND variable: Auto-set.
* differences in awk and gawk, array elements, deleting: Delete.
* differences in awk and gawk, AWKPATH environment variable: AWKPATH Variable.
* differences in awk and gawk, BEGIN/END patterns: I/O And BEGIN/END.
* differences in awk and gawk, BINMODE variable <1>: User-modified.
* differences in awk and gawk, BINMODE variable: PC Using.
* differences in awk and gawk, close function: Close Files And Pipes.
* differences in awk and gawk, ERRNO variable: Auto-set.
* differences in awk and gawk, error messages: Special FD.
* differences in awk and gawk, FIELDWIDTHS variable: User-modified.
* differences in awk and gawk, function arguments (gawk): Calling Built-in.
* differences in awk and gawk, getline command: Getline.
* differences in awk and gawk, IGNORECASE variable: User-modified.
* differences in awk and gawk, implementation limitations <1>: Redirection.
* differences in awk and gawk, implementation limitations: Getline Notes.
* differences in awk and gawk, input/output operators <1>: Getline/Coprocess.
* differences in awk and gawk, input/output operators: Redirection.
* differences in awk and gawk, line continuations: Conditional Exp.
* differences in awk and gawk, LINT variable: User-modified.
* differences in awk and gawk, match function: String Functions.
* differences in awk and gawk, next/nextfile statements: Nextfile Statement.
* differences in awk and gawk, print/printf statements: Format Modifiers.
* differences in awk and gawk, PROCINFO array: Auto-set.
* differences in awk and gawk, record separators: Records.
* differences in awk and gawk, regexp constants: Using Constant Regexps.
* differences in awk and gawk, regular expressions: Case-sensitivity.
* differences in awk and gawk, RS/RT variables: Records.
* differences in awk and gawk, RT variable: Auto-set.
* differences in awk and gawk, single-character fields: Single Character Fields.
* differences in awk and gawk, split function: String Functions.
* differences in awk and gawk, strings:  Scalar Constants.
* differences in awk and gawk, strings, storing: Records.
* differences in awk and gawk, strtonum function (gawk): String Functions.
* differences in awk and gawk, TEXTDOMAIN variable: User-modified.
* differences in awk and gawk, trunc-mod operation: Arithmetic Ops.
* directories, changing:                 Sample Library.
* directories, searching <1>:            Igawk Program.
* directories, searching:                AWKPATH Variable.
* division:                              Arithmetic Ops.
* do-while statement <1>:                Regexp Usage.
* do-while statement:                    Do Statement.
* documentation, of awk programs:        Library Names.
* documentation, online:                 Manual History.
* documents, searching:                  Dupword Program.
* dollar sign ($):                       Regexp Operators.
* dollar sign ($), $ field operator <1>: Precedence.
* dollar sign ($), $ field operator:     Fields.
* dollar sign ($), incrementing fields and arrays: Increment Ops.
* double quote (") <1>:                  Quoting.
* double quote ("):                      Read Terminal.
* double quote ("), regexp constants:    Computed Regexps.
* double-precision floating-point:       Basic Data Typing.
* Drepper, Ulrich:                       Acknowledgments.
* dupnode internal function:             Internals.
* dupword.awk program:                   Dupword Program.
* EBCDIC:                                Ordinal Functions.
* egrep utility <1>:                     Character Lists.
* egrep utility:                         Egrep Program.
* egrep.awk program:                     Egrep Program.
* elements in arrays:                    Reference to Elements.
* elements in arrays, assigning:         Assigning Elements.
* elements in arrays, deleting:          Delete.
* elements in arrays, order of:          Scanning an Array.
* elements in arrays, scanning:          Scanning an Array.
* email address for bug reports, bug-gawk@gnu.org: Bugs.
* EMISTERED:                             TCP/IP Networking.
* empty pattern:                         Empty.
* empty strings, See null strings:       Regexp Field Splitting.
* END pattern:                           BEGIN/END.
* END pattern, assert user-defined function and: Assert Function.
* END pattern, backslash continuation and: Egrep Program.
* END pattern, Boolean patterns and:     Expression Patterns.
* END pattern, exit statement and:       Exit Statement.
* END pattern, next/nextfile statements and <1>: Next Statement.
* END pattern, next/nextfile statements and: I/O And BEGIN/END.
* END pattern, operators and:            Using BEGIN/END.
* END pattern, pgawk program:            Profiling.
* END pattern, print statement and:      I/O And BEGIN/END.
* endfile user-defined function:         Filetrans Function.
* endgrent function (C library):         Group Functions.
* endgrent user-defined function:        Group Functions.
* endpwent function (C library):         Passwd Functions.
* endpwent user-defined function:        Passwd Functions.
* ENVIRON variable:                      Auto-set.
* environment variables:                 Auto-set.
* epoch, definition of:                  Glossary.
* equals sign (=), = operator:           Assignment Ops.
* equals sign (=), == operator <1>:      Precedence.
* equals sign (=), == operator:          Typing and Comparison.
* EREs (Extended Regular Expressions):   Character Lists.
* ERRNO variable <1>:                    Internals.
* ERRNO variable <2>:                    Getline.
* ERRNO variable:                        Auto-set.
* error handling:                        Special FD.
* error handling, ERRNO variable and:    Auto-set.
* error output:                          Special FD.
* escape processing, gsub/gensub/sub functions: Gory Details.
* escape sequences:                      Escape Sequences.
* escape sequences, unrecognized:        Options.
* evaluation order:                      Increment Ops.
* evaluation order, concatenation:       Concatenation.
* evaluation order, functions:           Calling Built-in.
* examining fields:                      Fields.
* exclamation point (!), ! operator <1>: Egrep Program.
* exclamation point (!), ! operator <2>: Precedence.
* exclamation point (!), ! operator:     Boolean Ops.
* exclamation point (!), != operator <1>: Precedence.
* exclamation point (!), != operator:    Typing and Comparison.
* exclamation point (!), !~ operator <1>: Regexp Constants.
* exclamation point (!), !~ operator <2>: Expression Patterns.
* exclamation point (!), !~ operator <3>: Case-sensitivity.
* exclamation point (!), !~ operator <4>: Typing and Comparison.
* exclamation point (!), !~ operator <5>: Regexp Usage.
* exclamation point (!), !~ operator <6>: Typing and Comparison.
* exclamation point (!), !~ operator <7>: Precedence.
* exclamation point (!), !~ operator:    Computed Regexps.
* exit statement:                        Exit Statement.
* exp function:                          Numeric Functions.
* expand utility:                        Very Simple.
* expressions:                           Expressions.
* expressions, as patterns:              Expression Patterns.
* expressions, assignment:               Assignment Ops.
* expressions, Boolean:                  Boolean Ops.
* expressions, comparison:               Typing and Comparison.
* expressions, conditional:              Conditional Exp.
* expressions, matching, See comparison expressions: Typing and Comparison.
* expressions, selecting:                Conditional Exp.
* Extended Regular Expressions (EREs):   Character Lists.
* extension function (gawk):             Using Internal File Ops.
* extensions, Bell Laboratories awk:     BTL.
* extensions, in gawk, not in POSIX awk: POSIX/GNU.
* extensions, mawk:                      Other Versions.
* extract.awk program:                   Extract Program.
* extraction, of marked strings (internationalization): String Extraction.
* false, logical:                        Truth Values.
* FDL (Free Documentation License):      GNU Free Documentation License.
* features, adding to gawk:              Adding Code.
* features, advanced, See advanced features: Obsolete.
* features, deprecated:                  Obsolete.
* features, undocumented:                Undocumented.
* Fenlason, Jay <1>:                     Contributors.
* Fenlason, Jay:                         History.
* fflush function:                       I/O Functions.
* fflush function, unsupported:          Options.
* field numbers:                         Nonconstant Fields.
* field operator $:                      Fields.
* field operators, dollar sign as:       Fields.
* field separators <1>:                  User-modified.
* field separators <2>:                  Field Separators.
* field separators:                      User-modified.
* field separators, choice of:           Field Separators.
* field separators, FIELDWIDTHS variable and: User-modified.
* field separators, in multiline records: Multiple Line.
* field separators, on command line:     Command Line Field Separator.
* field separators, POSIX and <1>:       Field Splitting Summary.
* field separators, POSIX and:           Fields.
* field separators, regular expressions as <1>: Regexp Field Splitting.
* field separators, regular expressions as: Field Separators.
* field separators, See Also OFS:        Changing Fields.
* field separators, spaces as:           Cut Program.
* fields <1>:                            Reading Files.
* fields <2>:                            Fields.
* fields:                                Basic High Level.
* fields, adding:                        Changing Fields.
* fields, changing contents of:          Changing Fields.
* fields, cutting:                       Cut Program.
* fields, examining:                     Fields.
* fields, number of:                     Fields.
* fields, numbers:                       Nonconstant Fields.
* fields, printing:                      Print Examples.
* fields, separating:                    Field Separators.
* fields, single-character:              Single Character Fields.
* FIELDWIDTHS variable <1>:              User-modified.
* FIELDWIDTHS variable:                  Constant Size.
* file descriptors:                      Special FD.
* file names, distinguishing:            Auto-set.
* file names, in compatibility mode:     Special Caveats.
* file names, standard streams in gawk:  Special FD.
* FILENAME variable <1>:                 Auto-set.
* FILENAME variable:                     Reading Files.
* FILENAME variable, getline, setting with: Getline Notes.
* filenames, assignments as:             Ignoring Assigns.
* files, .mo:                            Explaining gettext.
* files, .mo, converting from .po:       I18N Example.
* files, .mo, specifying directory of <1>: Explaining gettext.
* files, .mo, specifying directory of:   Programmer i18n.
* files, .po <1>:                        Translator i18n.
* files, .po:                            Explaining gettext.
* files, .po, converting to .mo:         I18N Example.
* files, /dev/... special files:         Special FD.
* files, /inet/ (gawk):                  TCP/IP Networking.
* files, /p (gawk):                      Portal Files.
* files, as single records:              Records.
* files, awk programs in:                Long.
* files, awkprof.out:                    Profiling.
* files, awkvars.out:                    Options.
* files, closing:                        I/O Functions.
* files, descriptors, See file descriptors: Special FD.
* files, for process information:        Special Process.
* files, group:                          Group Functions.
* files, information about, retrieving:  Sample Library.
* files, initialization and cleanup:     Filetrans Function.
* files, input, See input files:         Read Terminal.
* files, log, timestamps in:             Time Functions.
* files, managing:                       Data File Management.
* files, managing, data file boundaries: Filetrans Function.
* files, message object:                 Explaining gettext.
* files, message object, converting from portable object files: I18N Example.
* files, message object, specifying directory of <1>: Explaining gettext.
* files, message object, specifying directory of: Programmer i18n.
* files, multiple passes over:           Other Arguments.
* files, multiple, duplicating output into: Tee Program.
* files, output, See output files:       Close Files And Pipes.
* files, password:                       Passwd Functions.
* files, portable object <1>:            Explaining gettext.
* files, portable object:                Translator i18n.
* files, portable object, converting to message object files: I18N Example.
* files, portable object, generating:    Options.
* files, portal:                         Portal Files.
* files, processing, ARGIND variable and: Auto-set.
* files, reading:                        Rewind Function.
* files, reading, multiline records:     Multiple Line.
* files, searching for regular expressions: Egrep Program.
* files, skipping:                       File Checking.
* files, source, search path for:        Igawk Program.
* files, splitting:                      Split Program.
* files, Texinfo, extracting programs from: Extract Program.
* Fish, Fred <1>:                        Bugs.
* Fish, Fred:                            Contributors.
* fixed-width data:                      Constant Size.
* flag variables <1>:                    Boolean Ops.
* flag variables:                        Tee Program.
* floating-point:                        Floating Point Issues.
* floating-point, numbers:               Basic Data Typing.
* floating-point, numbers, AWKNUM internal type: Internals.
* FNR variable <1>:                      Auto-set.
* FNR variable:                          Records.
* FNR variable, changing:                Auto-set.
* for statement:                         For Statement.
* for statement, in arrays:              Scanning an Array.
* force_number internal function:        Internals.
* force_string internal function:        Internals.
* format specifiers, mixing regular with positional specifiers: Printf Ordering.
* format specifiers, printf statement:   Control Letters.
* format specifiers, strftime function (gawk): Time Functions.
* format strings:                        Basic Printf.
* formats, numeric output:               OFMT.
* formatting output:                     Printf.
* forward slash (/):                     Regexp.
* forward slash (/), / operator:         Precedence.
* forward slash (/), /= operator <1>:    Precedence.
* forward slash (/), /= operator:        Assignment Ops.
* forward slash (/), /= operator, vs. /=.../ regexp constant: Assignment Ops.
* forward slash (/), patterns and:       Expression Patterns.
* Free Documentation License (FDL):      GNU Free Documentation License.
* Free Software Foundation (FSF) <1>:    Glossary.
* Free Software Foundation (FSF) <2>:    Manual History.
* Free Software Foundation (FSF) <3>:    Getting.
* Free Software Foundation (FSF):        Glossary.
* free_temp internal macro:              Internals.
* FreeBSD:                               Glossary.
* FS variable <1>:                       User-modified.
* FS variable:                           Field Separators.
* FS variable, --field-separator option and: Options.
* FS variable, as null string:           Single Character Fields.
* FS variable, as TAB character:         Options.
* FS variable, changing value of <1>:    Field Separators.
* FS variable, changing value of:        Known Bugs.
* FS variable, running awk programs and: Cut Program.
* FS variable, setting from command line: Command Line Field Separator.
* FSF (Free Software Foundation) <1>:    Getting.
* FSF (Free Software Foundation) <2>:    Glossary.
* FSF (Free Software Foundation):        Manual History.
* function calls:                        Function Calls.
* functions, arrays as parameters to:    Function Caveats.
* functions, built-in <1>:               Functions.
* functions, built-in:                   Function Calls.
* functions, built-in, adding to gawk:   Dynamic Extensions.
* functions, built-in, evaluation order: Calling Built-in.
* functions, defining:                   Definition Syntax.
* functions, library:                    Library Functions.
* functions, library, assertions:        Assert Function.
* functions, library, associative arrays and: Library Names.
* functions, library, C library:         Getopt Function.
* functions, library, character values as numbers: Ordinal Functions.
* functions, library, Cliff random numbers: Cliff Random Function.
* functions, library, command-line options: Getopt Function.
* functions, library, example program for using: Igawk Program.
* functions, library, group database, reading: Group Functions.
* functions, library, managing data files: Data File Management.
* functions, library, managing time:     Gettimeofday Function.
* functions, library, merging arrays into strings: Join Function.
* functions, library, nextfile statement: Nextfile Function.
* functions, library, rounding numbers:  Round Function.
* functions, library, user database, reading: Passwd Functions.
* functions, names of <1>:               Definition Syntax.
* functions, names of:                   Arrays.
* functions, recursive:                  Definition Syntax.
* functions, return values, setting:     Internals.
* functions, string-translation:         I18N Functions.
* functions, undefined:                  Function Caveats.
* functions, user-defined:               User-defined.
* functions, user-defined, calling:      Function Caveats.
* functions, user-defined, counts:       Profiling.
* functions, user-defined, library of:   Library Functions.
* functions, user-defined, next/nextfile statements and <1>: Next Statement.
* functions, user-defined, next/nextfile statements and: Nextfile Statement.
* G-d:                                   Acknowledgments.
* Garfinkle, Scott:                      Contributors.
* gawk, awk and <1>:                     Preface.
* gawk, awk and:                         This Manual.
* gawk, bitwise operations in:           Bitwise Functions.
* gawk, break statement in:              Break Statement.
* gawk, built-in variables and:          Built-in Variables.
* gawk, character classes and:           Character Lists.
* gawk, coding style in:                 Adding Code.
* gawk, command-line options:            GNU Regexp Operators.
* gawk, comparison operators and:        Typing and Comparison.
* gawk, configuring:                     Configuration Philosophy.
* gawk, configuring, options:            Additional Configuration Options.
* gawk, continue statement in:           Continue Statement.
* gawk, debugging:                       Known Bugs.
* gawk, distribution:                    Distribution contents.
* gawk, escape sequences:                Escape Sequences.
* gawk, extensions, disabling:           Options.
* gawk, features, adding:                Adding Code.
* gawk, features, advanced:              Advanced Features.
* gawk, fflush function in:              I/O Functions.
* gawk, field separators and:            User-modified.
* gawk, FIELDWIDTHS variable in:         User-modified.
* gawk, file names in:                   Special Files.
* gawk, format-control characters:       Control Letters.
* gawk, function arguments and:          Calling Built-in.
* gawk, functions, adding:               Dynamic Extensions.
* gawk, hexadecimal numbers and:         Nondecimal-numbers.
* gawk, IGNORECASE variable in:          User-modified.
* gawk, implementation issues:           Notes.
* gawk, implementation issues, debugging: Compatibility Mode.
* gawk, implementation issues, downward compatibility: Compatibility Mode.
* gawk, implementation issues, limits:   Getline Notes.
* gawk, implementation issues, pipes:    Redirection.
* gawk, installing:                      Installation.
* gawk, internals:                       Internals.
* gawk, internationalization and, See internationalization: Internationalization.
* gawk, interpreter, adding code to <1>: Future Extensions.
* gawk, interpreter, adding code to:     Using Internal File Ops.
* gawk, interval expressions and:        Regexp Operators.
* gawk, line continuation in:            Conditional Exp.
* gawk, LINT variable in:                User-modified.
* gawk, list of contributors to:         Contributors.
* gawk, MS-DOS version of:               PC Using.
* gawk, newlines in:                     Statements/Lines.
* gawk, next file statement in:          Nextfile Statement.
* gawk, nextfile statement in <1>:       Nextfile Function.
* gawk, nextfile statement in:           Nextfile Statement.
* gawk, octal numbers and:               Nondecimal-numbers.
* gawk, OS/2 version of:                 PC Using.
* gawk, regexp constants and:            Using Constant Regexps.
* gawk, regular expressions, case sensitivity: Case-sensitivity.
* gawk, regular expressions, operators:  GNU Regexp Operators.
* gawk, regular expressions, precedence: Regexp Operators.
* gawk, See Also awk:                    Preface.
* gawk, source code, obtaining:          Getting.
* gawk, splitting fields and:            Constant Size.
* gawk, string-translation functions:    I18N Functions.
* gawk, timestamps:                      Time Functions.
* gawk, uses for:                        Preface.
* gawk, versions of, information about, printing: Options.
* gawk, word-boundary operator:          GNU Regexp Operators.
* General Public License (GPL):          Glossary.
* General Public License, See GPL:       Manual History.
* gensub function (gawk) <1>:            String Functions.
* gensub function (gawk):                Using Constant Regexps.
* gensub function (gawk), escape processing: Gory Details.
* get_argument internal function:        Internals.
* getgrent function (C library):         Group Functions.
* getgrent user-defined function:        Group Functions.
* getgrgid function (C library):         Group Functions.
* getgrgid user-defined function:        Group Functions.
* getgrnam function (C library):         Group Functions.
* getgrnam user-defined function:        Group Functions.
* getgruser function (C library):        Group Functions.
* getgruser function, user-defined:      Group Functions.
* getline command:                       Reading Files.
* getline command, _gr_init user-defined function: Group Functions.
* getline command, _pw_init function:    Passwd Functions.
* getline command, coprocesses, using from <1>: Close Files And Pipes.
* getline command, coprocesses, using from: Getline/Coprocess.
* getline command, deadlock and:         Two-way I/O.
* getline command, explicit input with:  Getline.
* getline command, FILENAME variable and: Getline Notes.
* getline command, return values:        Getline.
* getline command, variants:             Getline Summary.
* getopt function (C library):           Getopt Function.
* getopt user-defined function:          Getopt Function.
* getpwent function (C library):         Passwd Functions.
* getpwent user-defined function:        Passwd Functions.
* getpwnam function (C library):         Passwd Functions.
* getpwnam user-defined function:        Passwd Functions.
* getpwuid function (C library):         Passwd Functions.
* getpwuid user-defined function:        Passwd Functions.
* getservbyname function (C library):    TCP/IP Networking.
* gettext function (C library):          Explaining gettext.
* gettext library:                       Explaining gettext.
* gettext library, locale categories:    Explaining gettext.
* gettimeofday user-defined function:    Gettimeofday Function.
* GNITS mailing list:                    Acknowledgments.
* GNU awk, See gawk:                     Preface.
* GNU Free Documentation License:        GNU Free Documentation License.
* GNU General Public License:            Glossary.
* GNU Lesser General Public License:     Glossary.
* GNU long options <1>:                  Options.
* GNU long options:                      Command Line.
* GNU long options, printing list of:    Options.
* GNU Project <1>:                       Manual History.
* GNU Project:                           Glossary.
* GNU/Linux <1>:                         Additional Configuration Options.
* GNU/Linux <2>:                         Manual History.
* GNU/Linux <3>:                         Atari Compiling.
* GNU/Linux <4>:                         Glossary.
* GNU/Linux:                             I18N Example.
* GPL (General Public License) <1>:      Glossary.
* GPL (General Public License):          Manual History.
* GPL (General Public License), printing: Options.
* grcat program:                         Group Functions.
* Grigera, Juan <1>:                     Contributors.
* Grigera, Juan:                         Bugs.
* group database, reading:               Group Functions.
* group file:                            Group Functions.
* groups, information about:             Group Functions.
* gsub function <1>:                     String Functions.
* gsub function:                         Using Constant Regexps.
* gsub function, arguments of:           String Functions.
* gsub function, escape processing:      Gory Details.
* Hankerson, Darrel <1>:                 Acknowledgments.
* Hankerson, Darrel <2>:                 Bugs.
* Hankerson, Darrel:                     Contributors.
* Hartholz, Elaine:                      Acknowledgments.
* Hartholz, Marshall:                    Acknowledgments.
* Hasegawa, Isamu <1>:                   Acknowledgments.
* Hasegawa, Isamu:                       Contributors.
* hexadecimal numbers:                   Nondecimal-numbers.
* hexadecimal, values, enabling interpretation of: Options.
* histsort.awk program:                  History Sorting.
* Hughes, Phil:                          Acknowledgments.
* HUP signal:                            Profiling.
* hyphen (-), - operator:                Precedence.
* hyphen (-), -- (decrement/increment) operators: Precedence.
* hyphen (-), -- operator:               Increment Ops.
* hyphen (-), -= operator <1>:           Assignment Ops.
* hyphen (-), -= operator:               Precedence.
* hyphen (-), filenames beginning with:  Options.
* hyphen (-), in character lists:        Character Lists.
* id utility:                            Id Program.
* id.awk program:                        Id Program.
* if statement <1>:                      Regexp Usage.
* if statement:                          If Statement.
* if statement, actions, changing:       Ranges.
* igawk.sh program:                      Igawk Program.
* IGNORECASE variable <1>:               User-modified.
* IGNORECASE variable:                   Case-sensitivity.
* IGNORECASE variable, array sorting and: Array Sorting.
* IGNORECASE variable, array subscripts and: Array Intro.
* IGNORECASE variable, in example programs: Library Functions.
* implementation issues, gawk:           Notes.
* implementation issues, gawk, debugging: Compatibility Mode.
* implementation issues, gawk, limits <1>: Getline Notes.
* implementation issues, gawk, limits:   Redirection.
* in operator <1>:                       Id Program.
* in operator <2>:                       For Statement.
* in operator <3>:                       Precedence.
* in operator:                           Typing and Comparison.
* in operator, arrays and <1>:           Reference to Elements.
* in operator, arrays and:               Scanning an Array.
* increment operators:                   Increment Ops.
* index function:                        String Functions.
* indexing arrays:                       Array Intro.
* initialization, automatic:             More Complex.
* input files:                           Reading Files.
* input files, closing:                  Close Files And Pipes.
* input files, counting elements in:     Wc Program.
* input files, examples:                 Sample Data Files.
* input files, reading:                  Reading Files.
* input files, running awk without:      Read Terminal.
* input files, skipping:                 Nextfile Function.
* input files, variable assignments and: Other Arguments.
* input pipeline:                        Getline/Pipe.
* input redirection:                     Getline/File.
* input, data, nondecimal:               Nondecimal Data.
* input, explicit:                       Getline.
* input, files, See input files:         Multiple Line.
* input, multiline records:              Multiple Line.
* input, splitting into records:         Records.
* input, standard <1>:                   Read Terminal.
* input, standard:                       Special FD.
* input/output, binary:                  User-modified.
* input/output, from BEGIN and END:      I/O And BEGIN/END.
* input/output, two-way:                 Two-way I/O.
* insomnia, cure for:                    Alarm Program.
* installation, amiga:                   Amiga Installation.
* installation, atari:                   Atari Installation.
* installation, beos:                    BeOS Installation.
* installation, tandem:                  Tandem Installation.
* installation, vms:                     VMS Installation.
* installing gawk:                       Installation.
* int function:                          Numeric Functions.
* INT signal (MS-DOS):                   Profiling.
* integers:                              Basic Data Typing.
* integers, unsigned:                    Basic Data Typing.
* interacting with other programs:       I/O Functions.
* internationalization <1>:              I18N and L10N.
* internationalization:                  I18N Functions.
* internationalization, localization <1>: User-modified.
* internationalization, localization:    Internationalization.
* internationalization, localization, character classes: Character Lists.
* internationalization, localization, gawk and: Internationalization.
* internationalization, localization, locale categories: Explaining gettext.
* internationalization, localization, marked strings: Programmer i18n.
* internationalization, localization, portability and: I18N Portability.
* internationalizing a program:          Explaining gettext.
* interpreted programs <1>:              Glossary.
* interpreted programs:                  Basic High Level.
* interval expressions:                  Regexp Operators.
* inventory-shipped file:                Sample Data Files.
* ISO:                                   Glossary.
* ISO 8859-1:                            Glossary.
* ISO Latin-1:                           Glossary.
* Jacobs, Andrew:                        Passwd Functions.
* Jaegermann, Michal <1>:                Contributors.
* Jaegermann, Michal:                    Acknowledgments.
* Jedi knights:                          Undocumented.
* join user-defined function:            Join Function.
* Kahrs, Ju"rgen <1>:                    Acknowledgments.
* Kahrs, Ju"rgen:                        Contributors.
* Kenobi, Obi-Wan:                       Undocumented.
* Kernighan, Brian <1>:                  Conventions.
* Kernighan, Brian <2>:                  Concatenation.
* Kernighan, Brian <3>:                  Acknowledgments.
* Kernighan, Brian <4>:                  History.
* Kernighan, Brian <5>:                  BTL.
* Kernighan, Brian <6>:                  Other Versions.
* Kernighan, Brian <7>:                  Contributors.
* Kernighan, Brian:                      Basic Data Typing.
* kill command, dynamic profiling:       Profiling.
* Knights, jedi:                         Undocumented.
* Kwok, Conrad:                          Contributors.
* labels.awk program:                    Labels Program.
* languages, data-driven:                Basic High Level.
* LC_ALL locale category:                Explaining gettext.
* LC_COLLATE locale category:            Explaining gettext.
* LC_CTYPE locale category:              Explaining gettext.
* LC_MESSAGES locale category:           Explaining gettext.
* LC_MESSAGES locale category, bindtextdomain function (gawk): Programmer i18n.
* LC_MONETARY locale category:           Explaining gettext.
* LC_NUMERIC locale category:            Explaining gettext.
* LC_RESPONSE locale category:           Explaining gettext.
* LC_TIME locale category:               Explaining gettext.
* left angle bracket (<), < operator <1>: Typing and Comparison.
* left angle bracket (<), < operator:    Precedence.
* left angle bracket (<), < operator (I/O): Getline/File.
* left angle bracket (<), <= operator <1>: Typing and Comparison.
* left angle bracket (<), <= operator:   Precedence.
* left shift, bitwise:                   Bitwise Functions.
* leftmost longest match:                Multiple Line.
* length function:                       String Functions.
* Lesser General Public License (LGPL):  Glossary.
* LGPL (Lesser General Public License):  Glossary.
* libraries of awk functions:            Library Functions.
* libraries of awk functions, assertions: Assert Function.
* libraries of awk functions, associative arrays and: Library Names.
* libraries of awk functions, character values as numbers: Ordinal Functions.
* libraries of awk functions, command-line options: Getopt Function.
* libraries of awk functions, example program for using: Igawk Program.
* libraries of awk functions, group database, reading: Group Functions.
* libraries of awk functions, managing, data files: Data File Management.
* libraries of awk functions, managing, time: Gettimeofday Function.
* libraries of awk functions, merging arrays into strings: Join Function.
* libraries of awk functions, nextfile statement: Nextfile Function.
* libraries of awk functions, rounding numbers: Round Function.
* libraries of awk functions, user database, reading: Passwd Functions.
* line breaks:                           Statements/Lines.
* line continuations:                    Boolean Ops.
* line continuations, gawk:              Conditional Exp.
* line continuations, in print statement: Print Examples.
* line continuations, with C shell:      More Complex.
* lines, blank, printing:                Print.
* lines, counting:                       Wc Program.
* lines, duplicate, removing:            History Sorting.
* lines, matching ranges of:             Ranges.
* lines, skipping between markers:       Ranges.
* lint checking:                         User-modified.
* lint checking, array elements:         Delete.
* lint checking, array subscripts:       Uninitialized Subscripts.
* lint checking, empty programs:         Command Line.
* lint checking, issuing warnings:       Options.
* lint checking, POSIXLY_CORRECT environment variable: Options.
* lint checking, undefined functions:    Function Caveats.
* LINT variable:                         User-modified.
* Linux <1>:                             I18N Example.
* Linux <2>:                             Glossary.
* Linux <3>:                             Additional Configuration Options.
* Linux <4>:                             Manual History.
* Linux:                                 Atari Compiling.
* locale categories:                     Explaining gettext.
* localization:                          I18N and L10N.
* localization, See internationalization, localization: I18N and L10N.
* log files, timestamps in:              Time Functions.
* log function:                          Numeric Functions.
* logical false/true:                    Truth Values.
* logical operators, See Boolean expressions: Boolean Ops.
* login information:                     Passwd Functions.
* long options:                          Command Line.
* loops:                                 While Statement.
* loops, continue statements and:        For Statement.
* loops, count for header:               Profiling.
* loops, exiting:                        Break Statement.
* loops, See Also while statement:       While Statement.
* Lost In Space:                         Dynamic Extensions.
* ls utility:                            More Complex.
* lshift function (gawk):                Bitwise Functions.
* lvalues/rvalues:                       Assignment Ops.
* mailing labels, printing:              Labels Program.
* mailing list, GNITS:                   Acknowledgments.
* make_builtin internal function:        Internals.
* make_number internal function:         Internals.
* make_string internal function:         Internals.
* mark parity:                           Ordinal Functions.
* marked string extraction (internationalization): String Extraction.
* marked strings, extracting:            String Extraction.
* Marx, Groucho:                         Increment Ops.
* match function:                        String Functions.
* match function, RSTART/RLENGTH variables: String Functions.
* matching, expressions, See comparison expressions: Typing and Comparison.
* matching, leftmost longest:            Multiple Line.
* matching, null strings:                Gory Details.
* mawk program:                          Other Versions.
* memory, releasing:                     Internals.
* memory, setting limits:                Options.
* message object files:                  Explaining gettext.
* message object files, converting from portable object files: I18N Example.
* message object files, specifying directory of <1>: Programmer i18n.
* message object files, specifying directory of: Explaining gettext.
* metacharacters, escape sequences for:  Escape Sequences.
* mktime function (gawk):                Time Functions.
* modifiers, in format specifiers:       Format Modifiers.
* monetary information, localization:    Explaining gettext.
* msgfmt utility:                        I18N Example.
* names, arrays/variables <1>:           Library Names.
* names, arrays/variables:               Arrays.
* names, functions <1>:                  Library Names.
* names, functions:                      Definition Syntax.
* namespace issues <1>:                  Arrays.
* namespace issues:                      Library Names.
* namespace issues, functions:           Definition Syntax.
* nawk utility:                          Names.
* negative zero:                         Floating Point Issues.
* NetBSD:                                Glossary.
* networks, programming:                 TCP/IP Networking.
* networks, support for:                 Special Network.
* newlines <1>:                          Options.
* newlines <2>:                          Boolean Ops.
* newlines:                              Statements/Lines.
* newlines, as field separators:         Field Separators.
* newlines, as record separators:        Records.
* newlines, in dynamic regexps:          Computed Regexps.
* newlines, in regexp constants:         Computed Regexps.
* newlines, printing:                    Print Examples.
* newlines, separating statements in actions <1>: Statements.
* newlines, separating statements in actions: Action Overview.
* next file statement:                   POSIX/GNU.
* next file statement, deprecated:       Obsolete.
* next file statement, in gawk:          Nextfile Statement.
* next statement <1>:                    Next Statement.
* next statement:                        Boolean Ops.
* next statement, BEGIN/END patterns and: I/O And BEGIN/END.
* next statement, user-defined functions and: Next Statement.
* nextfile statement:                    Nextfile Statement.
* nextfile statement, BEGIN/END patterns and: I/O And BEGIN/END.
* nextfile statement, implementing:      Nextfile Function.
* nextfile statement, in gawk:           Nextfile Statement.
* nextfile statement, next file statement and: Obsolete.
* nextfile statement, user-defined functions and: Nextfile Statement.
* nextfile user-defined function:        Nextfile Function.
* NF variable <1>:                       Auto-set.
* NF variable:                           Fields.
* NF variable, decrementing:             Changing Fields.
* noassign.awk program:                  Ignoring Assigns.
* NODE internal type:                    Internals.
* nodes, duplicating:                    Internals.
* not Boolean-logic operator:            Boolean Ops.
* NR variable <1>:                       Records.
* NR variable:                           Auto-set.
* NR variable, changing:                 Auto-set.
* null strings <1>:                      Regexp Field Splitting.
* null strings <2>:                      Records.
* null strings <3>:                      Truth Values.
* null strings:                          Basic Data Typing.
* null strings, array elements and:      Delete.
* null strings, as array subscripts:     Uninitialized Subscripts.
* null strings, converting numbers to strings: Conversion.
* null strings, matching:                Gory Details.
* null strings, quoting and:             Quoting.
* number sign (#), #! (executable scripts): Executable Scripts.
* number sign (#), #! (executable scripts), portability issues with: Executable Scripts.
* number sign (#), commenting:           Comments.
* numbers:                               Internals.
* numbers, as array subscripts:          Numeric Array Subscripts.
* numbers, as values of characters:      Ordinal Functions.
* numbers, Cliff random:                 Cliff Random Function.
* numbers, converting:                   Conversion.
* numbers, converting, to strings <1>:   User-modified.
* numbers, converting, to strings:       Bitwise Functions.
* numbers, floating-point:               Basic Data Typing.
* numbers, floating-point, AWKNUM internal type: Internals.
* numbers, hexadecimal:                  Nondecimal-numbers.
* numbers, NODE internal type:           Internals.
* numbers, octal:                        Nondecimal-numbers.
* numbers, random:                       Numeric Functions.
* numbers, rounding:                     Round Function.
* numeric, constants:                    Scalar Constants.
* numeric, output format:                OFMT.
* numeric, strings:                      Typing and Comparison.
* numeric, values:                       Internals.
* oawk utility:                          Names.
* obsolete features:                     Obsolete.
* octal numbers:                         Nondecimal-numbers.
* octal values, enabling interpretation of: Options.
* OFMT variable <1>:                     User-modified.
* OFMT variable <2>:                     OFMT.
* OFMT variable:                         Conversion.
* OFMT variable, POSIX awk and:          OFMT.
* OFS variable <1>:                      User-modified.
* OFS variable <2>:                      Changing Fields.
* OFS variable:                          Output Separators.
* OpenBSD:                               Glossary.
* operating systems, BSD-based <1>:      Portal Files.
* operating systems, BSD-based:          Manual History.
* operating systems, PC, gawk on:        PC Using.
* operating systems, PC, gawk on, installing: PC Installation.
* operating systems, porting gawk to:    New Ports.
* operating systems, See Also GNU/Linux, PC operating systems, Unix: Installation.
* operations, bitwise:                   Bitwise Functions.
* operators, arithmetic:                 Arithmetic Ops.
* operators, assignment:                 Assignment Ops.
* operators, assignment, evaluation order: Assignment Ops.
* operators, Boolean, See Boolean expressions: Boolean Ops.
* operators, decrement/increment:        Increment Ops.
* operators, GNU-specific:               GNU Regexp Operators.
* operators, input/output <1>:           Redirection.
* operators, input/output <2>:           Precedence.
* operators, input/output <3>:           Getline/File.
* operators, input/output <4>:           Getline/Pipe.
* operators, input/output:               Getline/Coprocess.
* operators, logical, See Boolean expressions: Boolean Ops.
* operators, precedence <1>:             Precedence.
* operators, precedence:                 Increment Ops.
* operators, relational, See operators, comparison: Typing and Comparison.
* operators, short-circuit:              Boolean Ops.
* operators, string:                     Concatenation.
* operators, string-matching:            Regexp Usage.
* operators, string-matching, for buffers: GNU Regexp Operators.
* operators, word-boundary (gawk):       GNU Regexp Operators.
* options, command-line <1>:             Options.
* options, command-line <2>:             Command Line Field Separator.
* options, command-line:                 Long.
* options, command-line, end of:         Options.
* options, command-line, invoking awk:   Command Line.
* options, command-line, processing:     Getopt Function.
* options, deprecated:                   Obsolete.
* options, long <1>:                     Command Line.
* options, long:                         Options.
* options, printing list of:             Options.
* OR bitwise operation:                  Bitwise Functions.
* or Boolean-logic operator:             Boolean Ops.
* or function (gawk):                    Bitwise Functions.
* ord user-defined function:             Ordinal Functions.
* order of evaluation, concatenation:    Concatenation.
* ORS variable <1>:                      User-modified.
* ORS variable:                          Output Separators.
* output field separator, See OFS variable: Changing Fields.
* output record separator, See ORS variable: Output Separators.
* output redirection:                    Redirection.
* output, buffering:                     I/O Functions.
* output, duplicating into files:        Tee Program.
* output, files, closing:                Close Files And Pipes.
* output, format specifier, OFMT:        OFMT.
* output, formatted:                     Printf.
* output, pipes:                         Redirection.
* output, printing, See printing:        Printing.
* output, records:                       Output Separators.
* output, standard:                      Special FD.
* P1003.2 POSIX standard:                Glossary.
* param_cnt internal variable:           Internals.
* parameters, number of:                 Internals.
* parentheses ():                        Regexp Operators.
* parentheses (), pgawk program:         Profiling.
* password file:                         Passwd Functions.
* patterns:                              Patterns and Actions.
* patterns, comparison expressions as:   Expression Patterns.
* patterns, counts:                      Profiling.
* patterns, default:                     Very Simple.
* patterns, empty:                       Empty.
* patterns, expressions as:              Regexp Patterns.
* patterns, ranges in:                   Ranges.
* patterns, regexp constants as:         Expression Patterns.
* patterns, types of:                    Pattern Overview.
* PC operating systems, gawk on:         PC Using.
* PC operating systems, gawk on, installing: PC Installation.
* percent sign (%), % operator:          Precedence.
* percent sign (%), %= operator <1>:     Assignment Ops.
* percent sign (%), %= operator:         Precedence.
* period (.):                            Regexp Operators.
* PERL:                                  Future Extensions.
* Peters, Arno:                          Contributors.
* Peterson, Hal:                         Contributors.
* pgawk program:                         Profiling.
* pgawk program, awkprof.out file:       Profiling.
* pgawk program, dynamic profiling:      Profiling.
* pipes, closing:                        Close Files And Pipes.
* pipes, input:                          Getline/Pipe.
* pipes, output:                         Redirection.
* plus sign (+):                         Regexp Operators.
* plus sign (+), + operator:             Precedence.
* plus sign (+), ++ operator <1>:        Precedence.
* plus sign (+), ++ operator:            Increment Ops.
* plus sign (+), += operator <1>:        Assignment Ops.
* plus sign (+), += operator:            Precedence.
* plus sign (+), decrement/increment operators: Increment Ops.
* portability:                           Escape Sequences.
* portability, #! (executable scripts):  Executable Scripts.
* portability, ** operator and:          Arithmetic Ops.
* portability, **= operator and:         Assignment Ops.
* portability, ARGV variable:            Executable Scripts.
* portability, backslash continuation and: Statements/Lines.
* portability, backslash in escape sequences: Escape Sequences.
* portability, close function and:       Close Files And Pipes.
* portability, data files as single record: Records.
* portability, deleting array elements:  Delete.
* portability, example programs:         Library Functions.
* portability, fflush function and:      I/O Functions.
* portability, functions, defining:      Definition Syntax.
* portability, gawk:                     New Ports.
* portability, gettext library and:      Explaining gettext.
* portability, internationalization and: I18N Portability.
* portability, length function:          String Functions.
* portability, new awk vs. old awk:      Conversion.
* portability, next statement in user-defined functions: Function Caveats.
* portability, NF variable, decrementing: Changing Fields.
* portability, operators:                Increment Ops.
* portability, operators, not in POSIX awk: Precedence.
* portability, POSIXLY_CORRECT environment variable: Options.
* portability, substr function:          String Functions.
* portable object files <1>:             Translator i18n.
* portable object files:                 Explaining gettext.
* portable object files, converting to message object files: I18N Example.
* portable object files, generating:     Options.
* portal files:                          Portal Files.
* porting gawk:                          New Ports.
* positional specifiers, printf statement <1>: Printf Ordering.
* positional specifiers, printf statement: Format Modifiers.
* positional specifiers, printf statement, mixing with regular formats: Printf Ordering.
* positive zero:                         Floating Point Issues.
* POSIX awk <1>:                         This Manual.
* POSIX awk:                             Assignment Ops.
* POSIX awk, **= operator and:           Assignment Ops.
* POSIX awk, < operator and:             Getline/File.
* POSIX awk, arithmetic operators and:   Arithmetic Ops.
* POSIX awk, backslashes in string constants: Escape Sequences.
* POSIX awk, BEGIN/END patterns:         I/O And BEGIN/END.
* POSIX awk, break statement and:        Break Statement.
* POSIX awk, changes in awk versions:    POSIX.
* POSIX awk, character lists and:        Character Lists.
* POSIX awk, character lists and, character classes: Character Lists.
* POSIX awk, continue statement and:     Continue Statement.
* POSIX awk, CONVFMT variable and:       User-modified.
* POSIX awk, date utility and:           Time Functions.
* POSIX awk, field separators and <1>:   Fields.
* POSIX awk, field separators and:       Field Splitting Summary.
* POSIX awk, FS variable and:            User-modified.
* POSIX awk, function keyword in:        Definition Syntax.
* POSIX awk, functions and, gsub/sub:    Gory Details.
* POSIX awk, functions and, length:      String Functions.
* POSIX awk, GNU long options and:       Options.
* POSIX awk, interval expressions in:    Regexp Operators.
* POSIX awk, next/nextfile statements and: Next Statement.
* POSIX awk, numeric strings and:        Typing and Comparison.
* POSIX awk, OFMT variable and <1>:      OFMT.
* POSIX awk, OFMT variable and:          Conversion.
* POSIX awk, period (.), using:          Regexp Operators.
* POSIX awk, pipes, closing:             Close Files And Pipes.
* POSIX awk, printf format strings and:  Format Modifiers.
* POSIX awk, regular expressions and:    Regexp Operators.
* POSIX awk, timestamps and:             Time Functions.
* POSIX awk, | I/O operator and:         Getline/Pipe.
* POSIX mode:                            Options.
* POSIX, awk and:                        Preface.
* POSIX, gawk extensions not included in: POSIX/GNU.
* POSIX, programs, implementing in awk:  Clones.
* POSIXLY_CORRECT environment variable:  Options.
* precedence <1>:                        Precedence.
* precedence:                            Increment Ops.
* precedence, regexp operators:          Regexp Operators.
* print statement:                       Printing.
* print statement, BEGIN/END patterns and: I/O And BEGIN/END.
* print statement, commas, omitting:     Print Examples.
* print statement, I/O operators in:     Precedence.
* print statement, line continuations and: Print Examples.
* print statement, OFMT variable and:    User-modified.
* print statement, See Also redirection, of output: Redirection.
* print statement, sprintf function and: Round Function.
* printf statement <1>:                  Printf.
* printf statement:                      Printing.
* printf statement, columns, aligning:   Print Examples.
* printf statement, format-control characters: Control Letters.
* printf statement, I/O operators in:    Precedence.
* printf statement, modifiers:           Format Modifiers.
* printf statement, positional specifiers <1>: Format Modifiers.
* printf statement, positional specifiers: Printf Ordering.
* printf statement, positional specifiers, mixing with regular formats: Printf Ordering.
* printf statement, See Also redirection, of output: Redirection.
* printf statement, sprintf function and: Round Function.
* printf statement, syntax of:           Basic Printf.
* printing:                              Printing.
* printing, list of options:             Options.
* printing, mailing labels:              Labels Program.
* printing, unduplicated lines of text:  Uniq Program.
* printing, user information:            Id Program.
* private variables:                     Library Names.
* process information, files for:        Special Process.
* processes, two-way communications with: Two-way I/O.
* processing data:                       Basic High Level.
* PROCINFO array <1>:                    Group Functions.
* PROCINFO array <2>:                    Special Caveats.
* PROCINFO array <3>:                    Passwd Functions.
* PROCINFO array:                        Auto-set.
* profiling awk programs:                Profiling.
* profiling awk programs, dynamically:   Profiling.
* profiling gawk, See pgawk program:     Profiling.
* program, definition of:                Getting Started.
* programmers, attractiveness of:        Two-way I/O.
* programming conventions, --non-decimal-data option: Nondecimal Data.
* programming conventions, ARGC/ARGV variables: Auto-set.
* programming conventions, exit statement: Exit Statement.
* programming conventions, function parameters: Return Statement.
* programming conventions, functions, calling: Calling Built-in.
* programming conventions, functions, writing: Definition Syntax.
* programming conventions, gawk internals: Internal File Ops.
* programming conventions, nextfile statement: Nextfile Function.
* programming conventions, private variable names: Library Names.
* programming language, recipe for:      History.
* programming languages, data-driven vs. procedural: Getting Started.
* programming, basic steps:              Basic High Level.
* programming, concepts:                 Basic Concepts.
* pwcat program:                         Passwd Functions.
* question mark (?) <1>:                 GNU Regexp Operators.
* question mark (?):                     Regexp Operators.
* question mark (?), ?: operator:        Precedence.
* QUIT signal (MS-DOS):                  Profiling.
* quoting <1>:                           Long.
* quoting <2>:                           Read Terminal.
* quoting:                               Comments.
* quoting, rules for:                    Quoting.
* quoting, tricks for:                   Quoting.
* Rakitzis, Byron:                       History Sorting.
* rand function:                         Numeric Functions.
* random numbers, Cliff:                 Cliff Random Function.
* random numbers, rand/srand functions:  Numeric Functions.
* random numbers, seed of:               Numeric Functions.
* range expressions:                     Character Lists.
* range patterns:                        Ranges.
* Rankin, Pat <1>:                       Bugs.
* Rankin, Pat <2>:                       Acknowledgments.
* Rankin, Pat <3>:                       Assignment Ops.
* Rankin, Pat:                           Contributors.
* raw sockets:                           TCP/IP Networking.
* readable data files, checking:         File Checking.
* readable.awk program:                  File Checking.
* recipe for a programming language:     History.
* record separators <1>:                 User-modified.
* record separators:                     Records.
* record separators, changing:           Records.
* record separators, regular expressions as: Records.
* record separators, with multiline records: Multiple Line.
* records <1>:                           Basic High Level.
* records:                               Reading Files.
* records, multiline:                    Multiple Line.
* records, printing:                     Print.
* records, splitting input into:         Records.
* records, terminating:                  Records.
* records, treating files as:            Records.
* recursive functions:                   Definition Syntax.
* redirection of input:                  Getline/File.
* redirection of output:                 Redirection.
* reference counting, sorting arrays:    Array Sorting.
* regexp constants <1>:                  Typing and Comparison.
* regexp constants <2>:                  Regexp Usage.
* regexp constants:                      Regexp Constants.
* regexp constants, /=.../, /= operator and: Assignment Ops.
* regexp constants, as patterns:         Expression Patterns.
* regexp constants, in gawk:             Using Constant Regexps.
* regexp constants, slashes vs. quotes:  Computed Regexps.
* regexp constants, vs. string constants: Computed Regexps.
* regexp, See regular expressions:       Regexp.
* regular expressions:                   Regexp.
* regular expressions as field separators: Field Separators.
* regular expressions, anchors in:       Regexp Operators.
* regular expressions, as field separators: Regexp Field Splitting.
* regular expressions, as patterns <1>:  Regexp Usage.
* regular expressions, as patterns:      Regexp Patterns.
* regular expressions, as record separators: Records.
* regular expressions, case sensitivity <1>: Case-sensitivity.
* regular expressions, case sensitivity: User-modified.
* regular expressions, computed:         Computed Regexps.
* regular expressions, constants, See regexp constants: Regexp Usage.
* regular expressions, dynamic:          Computed Regexps.
* regular expressions, dynamic, with embedded newlines: Computed Regexps.
* regular expressions, gawk, command-line options: GNU Regexp Operators.
* regular expressions, interval expressions and: Options.
* regular expressions, leftmost longest match: Leftmost Longest.
* regular expressions, operators <1>:    Regexp Usage.
* regular expressions, operators:        Regexp Operators.
* regular expressions, operators, for buffers: GNU Regexp Operators.
* regular expressions, operators, for words: GNU Regexp Operators.
* regular expressions, operators, gawk:  GNU Regexp Operators.
* regular expressions, operators, precedence of: Regexp Operators.
* regular expressions, searching for:    Egrep Program.
* relational operators, See comparison operators: Typing and Comparison.
* return statement, user-defined functions: Return Statement.
* return values, close function:         Close Files And Pipes.
* rev user-defined function:             Function Example.
* rewind user-defined function:          Rewind Function.
* right angle bracket (>), > operator <1>: Precedence.
* right angle bracket (>), > operator:   Typing and Comparison.
* right angle bracket (>), > operator (I/O): Redirection.
* right angle bracket (>), >= operator <1>: Precedence.
* right angle bracket (>), >= operator:  Typing and Comparison.
* right angle bracket (>), >> operator (I/O) <1>: Precedence.
* right angle bracket (>), >> operator (I/O): Redirection.
* right shift, bitwise:                  Bitwise Functions.
* Ritchie, Dennis:                       Basic Data Typing.
* RLENGTH variable:                      Auto-set.
* RLENGTH variable, match function and:  String Functions.
* Robbins, Arnold <1>:                   Contributors.
* Robbins, Arnold <2>:                   Passwd Functions.
* Robbins, Arnold <3>:                   Getline/Pipe.
* Robbins, Arnold <4>:                   Command Line Field Separator.
* Robbins, Arnold <5>:                   Alarm Program.
* Robbins, Arnold <6>:                   Future Extensions.
* Robbins, Arnold:                       Bugs.
* Robbins, Bill:                         Getline/Pipe.
* Robbins, Harry:                        Acknowledgments.
* Robbins, Jean:                         Acknowledgments.
* Robbins, Miriam <1>:                   Acknowledgments.
* Robbins, Miriam <2>:                   Passwd Functions.
* Robbins, Miriam:                       Getline/Pipe.
* Robinson, Will:                        Dynamic Extensions.
* robot, the:                            Dynamic Extensions.
* Rommel, Kai Uwe <1>:                   Acknowledgments.
* Rommel, Kai Uwe:                       Contributors.
* round user-defined function:           Round Function.
* rounding:                              Round Function.
* rounding numbers:                      Round Function.
* RS variable <1>:                       User-modified.
* RS variable:                           Records.
* RS variable, multiline records and:    Multiple Line.
* rshift function (gawk):                Bitwise Functions.
* RSTART variable:                       Auto-set.
* RSTART variable, match function and:   String Functions.
* RT variable <1>:                       Records.
* RT variable <2>:                       Multiple Line.
* RT variable:                           Auto-set.
* Rubin, Paul <1>:                       History.
* Rubin, Paul:                           Contributors.
* rule, definition of:                   Getting Started.
* rvalues/lvalues:                       Assignment Ops.
* scalar values:                         Basic Data Typing.
* Schreiber, Bert:                       Acknowledgments.
* Schreiber, Rita:                       Acknowledgments.
* search paths <1>:                      VMS Running.
* search paths:                          PC Using.
* search paths, for source files <1>:    AWKPATH Variable.
* search paths, for source files <2>:    Igawk Program.
* search paths, for source files:        VMS Running.
* searching:                             String Functions.
* searching, files for regular expressions: Egrep Program.
* searching, for words:                  Dupword Program.
* sed utility <1>:                       Simple Sed.
* sed utility <2>:                       Igawk Program.
* sed utility <3>:                       Field Splitting Summary.
* sed utility:                           Glossary.
* semicolon (;):                         Statements/Lines.
* semicolon (;), AWKPATH variable and:   PC Using.
* semicolon (;), separating statements in actions <1>: Action Overview.
* semicolon (;), separating statements in actions: Statements.
* separators, field:                     User-modified.
* separators, field, FIELDWIDTHS variable and: User-modified.
* separators, field, POSIX and:          Fields.
* separators, for records:               Records.
* separators, for records, regular expressions as: Records.
* separators, for statements in actions: Action Overview.
* separators, record:                    User-modified.
* separators, subscript:                 User-modified.
* set_value internal function:           Internals.
* shells, piping commands into:          Redirection.
* shells, quoting:                       Using Shell Variables.
* shells, quoting, rules for:            Quoting.
* shells, scripts:                       One-shot.
* shells, variables:                     Using Shell Variables.
* shift, bitwise:                        Bitwise Functions.
* short-circuit operators:               Boolean Ops.
* side effects <1>:                      Increment Ops.
* side effects <2>:                      Concatenation.
* side effects:                          Increment Ops.
* side effects, array indexing:          Reference to Elements.
* side effects, asort function:          Array Sorting.
* side effects, assignment expressions:  Assignment Ops.
* side effects, Boolean operators:       Boolean Ops.
* side effects, conditional expressions: Conditional Exp.
* side effects, decrement/increment operators: Increment Ops.
* side effects, FILENAME variable:       Getline Notes.
* side effects, function calls:          Function Calls.
* side effects, statements:              Action Overview.
* signals, HUP/SIGHUP:                   Profiling.
* signals, INT/SIGINT (MS-DOS):          Profiling.
* signals, QUIT/SIGQUIT (MS-DOS):        Profiling.
* signals, USR1/SIGUSR1:                 Profiling.
* sin function:                          Numeric Functions.
* single quote (') <1>:                  Quoting.
* single quote (') <2>:                  Long.
* single quote ('):                      One-shot.
* single quote ('), vs. apostrophe:      Comments.
* single quote ('), with double quotes:  Quoting.
* single-character fields:               Single Character Fields.
* single-precision floating-point:       Basic Data Typing.
* Skywalker, Luke:                       Undocumented.
* sleep utility:                         Alarm Program.
* sockets:                               TCP/IP Networking.
* sort function, arrays, sorting:        Array Sorting.
* sort utility:                          Word Sorting.
* sort utility, coprocesses and:         Two-way I/O.
* sorting characters in different languages: Explaining gettext.
* source code, awka:                     Other Versions.
* source code, Bell Laboratories awk:    Other Versions.
* source code, gawk:                     Gawk Distribution.
* source code, mawk:                     Other Versions.
* source code, mixing:                   Options.
* source files, search path for:         Igawk Program.
* sparse arrays:                         Array Intro.
* Spencer, Henry:                        Glossary.
* split function:                        String Functions.
* split function, array elements, deleting: Delete.
* split utility:                         Split Program.
* split.awk program:                     Split Program.
* sprintf function <1>:                  String Functions.
* sprintf function:                      OFMT.
* sprintf function, OFMT variable and:   User-modified.
* sprintf function, print/printf statements and: Round Function.
* sqrt function:                         Numeric Functions.
* square brackets ([]):                  Regexp Operators.
* srand function:                        Numeric Functions.
* Stallman, Richard <1>:                 Glossary.
* Stallman, Richard <2>:                 Manual History.
* Stallman, Richard <3>:                 Contributors.
* Stallman, Richard:                     Acknowledgments.
* standard input <1>:                    Special FD.
* standard input:                        Read Terminal.
* standard output:                       Special FD.
* stat function, implementing in gawk:   Sample Library.
* statements, compound, control statements and: Statements.
* statements, control, in actions:       Statements.
* statements, multiple:                  Statements/Lines.
* stlen internal variable:               Internals.
* stptr internal variable:               Internals.
* stream editors <1>:                    Simple Sed.
* stream editors:                        Field Splitting Summary.
* strftime function (gawk):              Time Functions.
* string constants:                      Scalar Constants.
* string constants, vs. regexp constants: Computed Regexps.
* string extraction (internationalization): String Extraction.
* string operators:                      Concatenation.
* string-matching operators:             Regexp Usage.
* strings:                               Internals.
* strings, converting:                   Conversion.
* strings, converting, numbers to <1>:   Bitwise Functions.
* strings, converting, numbers to:       User-modified.
* strings, empty, See null strings:      Records.
* strings, extracting:                   String Extraction.
* strings, for localization:             Programmer i18n.
* strings, length of:                    Scalar Constants.
* strings, merging arrays into:          Join Function.
* strings, NODE internal type:           Internals.
* strings, null:                         Regexp Field Splitting.
* strings, numeric:                      Typing and Comparison.
* strings, splitting:                    String Functions.
* strtonum function (gawk):              String Functions.
* strtonum function (gawk), --non-decimal-data option and: Nondecimal Data.
* sub function <1>:                      String Functions.
* sub function:                          Using Constant Regexps.
* sub function, arguments of:            String Functions.
* sub function, escape processing:       Gory Details.
* subscript separators:                  User-modified.
* subscripts in arrays, multidimensional: Multi-dimensional.
* subscripts in arrays, multidimensional, scanning: Multi-scanning.
* subscripts in arrays, numbers as:      Numeric Array Subscripts.
* subscripts in arrays, uninitialized variables as: Uninitialized Subscripts.
* SUBSEP variable:                       User-modified.
* SUBSEP variable, multidimensional arrays: Multi-dimensional.
* substr function:                       String Functions.
* Sumner, Andrew:                        Other Versions.
* syntactic ambiguity: /= operator vs. /=.../ regexp constant: Assignment Ops.
* system function:                       I/O Functions.
* systime function (gawk):               Time Functions.
* tandem:                                Tandem Installation.
* Tcl:                                   Library Names.
* TCP/IP:                                TCP/IP Networking.
* TCP/IP, support for:                   Special Network.
* tee utility:                           Tee Program.
* tee.awk program:                       Tee Program.
* terminating records:                   Records.
* testbits.awk program:                  Bitwise Functions.
* Texinfo <1>:                           Extract Program.
* Texinfo <2>:                           Conventions.
* Texinfo <3>:                           Library Functions.
* Texinfo <4>:                           Dupword Program.
* Texinfo <5>:                           Sample Data Files.
* Texinfo <6>:                           Distribution contents.
* Texinfo:                               Adding Code.
* Texinfo, chapter beginnings in files:  Regexp Operators.
* Texinfo, extracting programs from source files: Extract Program.
* text, printing:                        Print.
* text, printing, unduplicated lines of: Uniq Program.
* textdomain function (C library):       Explaining gettext.
* TEXTDOMAIN variable <1>:               Programmer i18n.
* TEXTDOMAIN variable:                   User-modified.
* TEXTDOMAIN variable, BEGIN pattern and: Programmer i18n.
* TEXTDOMAIN variable, portability and:  I18N Portability.
* tilde (~), ~ operator <1>:             Typing and Comparison.
* tilde (~), ~ operator <2>:             Computed Regexps.
* tilde (~), ~ operator <3>:             Regexp Usage.
* tilde (~), ~ operator <4>:             Regexp Constants.
* tilde (~), ~ operator <5>:             Typing and Comparison.
* tilde (~), ~ operator <6>:             Case-sensitivity.
* tilde (~), ~ operator <7>:             Expression Patterns.
* tilde (~), ~ operator:                 Precedence.
* time, alarm clock example program:     Alarm Program.
* time, localization and:                Explaining gettext.
* time, managing:                        Gettimeofday Function.
* time, retrieving:                      Time Functions.
* timestamps:                            Time Functions.
* timestamps, converting dates to:       Time Functions.
* timestamps, formatted:                 Gettimeofday Function.
* tmp_number internal function:          Internals.
* tmp_string internal function:          Internals.
* tolower function:                      String Functions.
* toupper function:                      String Functions.
* tr utility:                            Translate Program.
* translate.awk program:                 Translate Program.
* troubleshooting, --non-decimal-data option: Options.
* troubleshooting, -F option:            Known Bugs.
* troubleshooting, == operator:          Typing and Comparison.
* troubleshooting, awk uses FS not IFS:  Field Separators.
* troubleshooting, backslash before nonspecial character: Escape Sequences.
* troubleshooting, division:             Arithmetic Ops.
* troubleshooting, fatal errors, field widths, specifying: Constant Size.
* troubleshooting, fatal errors, printf format strings: Format Modifiers.
* troubleshooting, fflush function:      I/O Functions.
* troubleshooting, function call syntax: Function Calls.
* troubleshooting, gawk <1>:             Compatibility Mode.
* troubleshooting, gawk:                 Known Bugs.
* troubleshooting, gawk, bug reports:    Bugs.
* troubleshooting, gawk, fatal errors, function arguments: Calling Built-in.
* troubleshooting, getline function:     File Checking.
* troubleshooting, gsub/sub functions:   String Functions.
* troubleshooting, match function:       String Functions.
* troubleshooting, print statement, omitting commas: Print Examples.
* troubleshooting, printing:             Redirection.
* troubleshooting, quotes with file names: Special FD.
* troubleshooting, readable data files:  File Checking.
* troubleshooting, regexp constants vs. string constants: Computed Regexps.
* troubleshooting, string concatenation: Concatenation.
* troubleshooting, substr function:      String Functions.
* troubleshooting, system function:      I/O Functions.
* troubleshooting, typographical errors, global variables: Options.
* true, logical:                         Truth Values.
* Trueman, David <1>:                    History.
* Trueman, David <2>:                    Acknowledgments.
* Trueman, David:                        Contributors.
* trunc-mod operation:                   Arithmetic Ops.
* truth values:                          Truth Values.
* type conversion:                       Conversion.
* type internal variable:                Internals.
* undefined functions:                   Function Caveats.
* underscore (_), _ C macro:             Explaining gettext.
* underscore (_), in names of private variables: Library Names.
* underscore (_), translatable string:   Programmer i18n.
* undocumented features:                 Undocumented.
* uninitialized variables, as array subscripts: Uninitialized Subscripts.
* uniq utility:                          Uniq Program.
* uniq.awk program:                      Uniq Program.
* Unix:                                  Glossary.
* Unix awk, backslashes in escape sequences: Escape Sequences.
* Unix awk, close function and:          Close Files And Pipes.
* Unix awk, password files, field separators and: Command Line Field Separator.
* Unix, awk scripts and:                 Executable Scripts.
* unsigned integers:                     Basic Data Typing.
* update_ERRNO internal function:        Internals.
* user database, reading:                Passwd Functions.
* user-defined, functions:               User-defined.
* user-defined, functions, counts:       Profiling.
* user-defined, variables:               Variables.
* user-modifiable variables:             User-modified.
* users, information about, printing:    Id Program.
* users, information about, retrieving:  Passwd Functions.
* USR1 signal:                           Profiling.
* values, numeric:                       Basic Data Typing.
* values, string:                        Basic Data Typing.
* variable typing:                       Typing and Comparison.
* variables <1>:                         Basic Data Typing.
* variables:                             Other Features.
* variables, assigning on command line:  Assignment Options.
* variables, built-in <1>:               Built-in Variables.
* variables, built-in:                   Using Variables.
* variables, built-in, -v option, setting with: Options.
* variables, built-in, conveying information: Auto-set.
* variables, flag:                       Boolean Ops.
* variables, getline command into, using <1>: Getline/Variable/File.
* variables, getline command into, using <2>: Getline/Variable.
* variables, getline command into, using <3>: Getline/Variable/Pipe.
* variables, getline command into, using: Getline/Variable/Coprocess.
* variables, global, for library functions: Library Names.
* variables, global, printing list of:   Options.
* variables, initializing:               Using Variables.
* variables, names of:                   Arrays.
* variables, private:                    Library Names.
* variables, setting:                    Options.
* variables, shadowing:                  Definition Syntax.
* variables, types of:                   Assignment Ops.
* variables, types of, comparison expressions and: Typing and Comparison.
* variables, uninitialized, as array subscripts: Uninitialized Subscripts.
* variables, user-defined:               Variables.
* vertical bar (|):                      Regexp Operators.
* vertical bar (|), | operator (I/O) <1>: Getline/Pipe.
* vertical bar (|), | operator (I/O):    Precedence.
* vertical bar (|), |& I/O operator (I/O): Two-way I/O.
* vertical bar (|), |& operator (I/O) <1>: Getline/Coprocess.
* vertical bar (|), |& operator (I/O):   Precedence.
* vertical bar (|), |& operator (I/O), two-way communications: Portal Files.
* vertical bar (|), || operator <1>:     Boolean Ops.
* vertical bar (|), || operator:         Precedence.
* vname internal variable:               Internals.
* w utility:                             Constant Size.
* Wall, Larry:                           Future Extensions.
* warnings, issuing:                     Options.
* wc utility:                            Wc Program.
* wc.awk program:                        Wc Program.
* Weinberger, Peter <1>:                 Contributors.
* Weinberger, Peter:                     History.
* while statement <1>:                   Regexp Usage.
* while statement:                       While Statement.
* whitespace, as field separators:       Field Separators.
* whitespace, functions, calling:        Calling Built-in.
* whitespace, newlines as:               Options.
* Williams, Kent:                        Contributors.
* Woods, John:                           Contributors.
* word boundaries, matching:             GNU Regexp Operators.
* word, regexp definition of:            GNU Regexp Operators.
* word-boundary operator (gawk):         GNU Regexp Operators.
* wordfreq.awk program:                  Word Sorting.
* words, counting:                       Wc Program.
* words, duplicate, searching for:       Dupword Program.
* words, usage counts, generating:       Word Sorting.
* xgettext utility:                      String Extraction.
* XOR bitwise operation:                 Bitwise Functions.
* xor function (gawk):                   Bitwise Functions.
* Zaretskii, Eli:                        Acknowledgments.
* zero, negative vs. positive:           Floating Point Issues.
* Zoulas, Christos:                      Contributors.
* {} (braces), actions and:              Action Overview.
* {} (braces), pgawk program:            Profiling.
* {} (braces), statements, grouping:     Statements.
* | (vertical bar):                      Regexp Operators.
* | (vertical bar), | operator (I/O) <1>: Redirection.
* | (vertical bar), | operator (I/O) <2>: Precedence.
* | (vertical bar), | operator (I/O):    Getline/Pipe.
* | (vertical bar), |& operator (I/O) <1>: Redirection.
* | (vertical bar), |& operator (I/O) <2>: Two-way I/O.
* | (vertical bar), |& operator (I/O) <3>: Getline/Coprocess.
* | (vertical bar), |& operator (I/O):   Precedence.
* | (vertical bar), |& operator (I/O), pipes, closing: Close Files And Pipes.
* | (vertical bar), |& operator (I/O), two-way communications: Portal Files.
* | (vertical bar), || operator <1>:     Precedence.
* | (vertical bar), || operator:         Boolean Ops.
* ~ (tilde), ~ operator <1>:             Typing and Comparison.
* ~ (tilde), ~ operator <2>:             Precedence.
* ~ (tilde), ~ operator <3>:             Typing and Comparison.
* ~ (tilde), ~ operator <4>:             Case-sensitivity.
* ~ (tilde), ~ operator <5>:             Expression Patterns.
* ~ (tilde), ~ operator <6>:             Regexp Constants.
* ~ (tilde), ~ operator:                 Computed Regexps.



Tag Table:
Node: Top1277
Node: Foreword25675
Node: Preface29999
Ref: Preface-Footnote-132881
Node: History33113
Node: Names35372
Ref: Names-Footnote-136881
Node: This Manual36953
Ref: This Manual-Footnote-142146
Node: Conventions42246
Node: Manual History44123
Ref: Manual History-Footnote-147809
Ref: Manual History-Footnote-247850
Node: How To Contribute47924
Node: Acknowledgments48522
Node: Getting Started52327
Node: Running gawk54720
Node: One-shot55925
Node: Read Terminal57182
Ref: Read Terminal-Footnote-158831
Node: Long59002
Node: Executable Scripts60403
Ref: Executable Scripts-Footnote-162139
Ref: Executable Scripts-Footnote-262290
Node: Comments62741
Node: Quoting65133
Node: Sample Data Files69111
Node: Very Simple72189
Node: Two Rules76809
Node: More Complex79008
Ref: More Complex-Footnote-181931
Ref: More Complex-Footnote-282407
Node: Statements/Lines82490
Ref: Statements/Lines-Footnote-186849
Node: Other Features87158
Node: When88023
Node: Regexp90012
Node: Regexp Usage91402
Node: Escape Sequences93493
Node: Regexp Operators99405
Ref: Regexp Operators-Footnote-1106546
Ref: Regexp Operators-Footnote-2106693
Node: Character Lists106791
Node: GNU Regexp Operators111260
Node: Case-sensitivity114755
Ref: Case-sensitivity-Footnote-1117880
Node: Leftmost Longest118115
Node: Computed Regexps119429
Node: Reading Files122820
Node: Records124606
Ref: Records-Footnote-1132484
Node: Fields132521
Ref: Fields-Footnote-1135576
Node: Nonconstant Fields135662
Node: Changing Fields137914
Node: Field Separators142624
Node: Regexp Field Splitting146168
Node: Single Character Fields148669
Node: Command Line Field Separator149732
Node: Field Splitting Summary153183
Ref: Field Splitting Summary-Footnote-1155286
Node: Constant Size155387
Node: Multiple Line159961
Node: Getline165392
Node: Plain Getline167455
Node: Getline/Variable169505
Node: Getline/File170637
Node: Getline/Variable/File172062
Node: Getline/Pipe173685
Node: Getline/Variable/Pipe175892
Node: Getline/Coprocess177108
Node: Getline/Variable/Coprocess178382
Node: Getline Notes179130
Node: Getline Summary180479
Node: Printing181186
Node: Print182900
Node: Print Examples184281
Node: Output Separators187178
Node: OFMT188994
Node: Printf190396
Node: Basic Printf191310
Node: Control Letters192894
Node: Format Modifiers195481
Node: Printf Examples200533
Node: Redirection203303
Node: Special Files210027
Node: Special FD210656
Node: Special Process213695
Node: Special Network215981
Node: Special Caveats216896
Ref: Special Caveats-Footnote-1218106
Node: Close Files And Pipes218489
Ref: Close Files And Pipes-Footnote-1225671
Node: Expressions225819
Node: Constants228007
Node: Scalar Constants228703
Ref: Scalar Constants-Footnote-1229567
Node: Nondecimal-numbers229749
Node: Regexp Constants232925
Node: Using Constant Regexps233389
Node: Variables236549
Node: Using Variables237200
Node: Assignment Options238741
Node: Conversion240681
Ref: Conversion-Footnote-1243912
Node: Arithmetic Ops244021
Node: Concatenation246518
Node: Assignment Ops249213
Node: Increment Ops255529
Node: Truth Values259017
Node: Typing and Comparison260062
Ref: Typing and Comparison-Footnote-1266616
Node: Boolean Ops266761
Node: Conditional Exp270869
Node: Function Calls272665
Node: Precedence275638
Node: Patterns and Actions279082
Node: Pattern Overview280135
Node: Regexp Patterns281748
Node: Expression Patterns282307
Node: Ranges285913
Node: BEGIN/END289014
Node: Using BEGIN/END289754
Ref: Using BEGIN/END-Footnote-1292539
Node: I/O And BEGIN/END292653
Node: Empty294992
Node: Using Shell Variables295291
Node: Action Overview297651
Node: Statements300217
Node: If Statement301923
Node: While Statement303432
Node: Do Statement305455
Node: For Statement306595
Node: Break Statement309783
Node: Continue Statement311887
Node: Next Statement313826
Node: Nextfile Statement316215
Node: Exit Statement318969
Node: Built-in Variables321078
Node: User-modified322168
Ref: User-modified-Footnote-1329754
Node: Auto-set329816
Ref: Auto-set-Footnote-1337839
Node: ARGC and ARGV338044
Node: Arrays341906
Node: Array Intro343836
Node: Reference to Elements348106
Node: Assigning Elements349991
Node: Array Example350453
Node: Scanning an Array352176
Node: Delete354500
Ref: Delete-Footnote-1356950
Node: Numeric Array Subscripts357007
Node: Uninitialized Subscripts359286
Node: Multi-dimensional360908
Node: Multi-scanning363955
Node: Array Sorting365627
Node: Functions368441
Node: Built-in369175
Node: Calling Built-in370158
Node: Numeric Functions372133
Ref: Numeric Functions-Footnote-1375873
Ref: Numeric Functions-Footnote-2376199
Node: String Functions376468
Ref: String Functions-Footnote-1393064
Ref: String Functions-Footnote-2393223
Node: Gory Details393310
Ref: Gory Details-Footnote-1399897
Ref: Gory Details-Footnote-2399948
Node: I/O Functions400155
Ref: I/O Functions-Footnote-1406832
Node: Time Functions406923
Ref: Time Functions-Footnote-1417697
Ref: Time Functions-Footnote-2417765
Ref: Time Functions-Footnote-3417923
Ref: Time Functions-Footnote-4418034
Ref: Time Functions-Footnote-5418159
Ref: Time Functions-Footnote-6418418
Node: Bitwise Functions418680
Ref: Bitwise Functions-Footnote-1423378
Node: I18N Functions423562
Node: User-defined425306
Node: Definition Syntax426082
Node: Function Example430474
Node: Function Caveats433115
Node: Return Statement437015
Node: Dynamic Typing439673
Node: Internationalization440411
Node: I18N and L10N441829
Node: Explaining gettext442538
Ref: Explaining gettext-Footnote-1447474
Ref: Explaining gettext-Footnote-2447713
Node: Programmer i18n447882
Node: Translator i18n452228
Node: String Extraction453013
Ref: String Extraction-Footnote-1454015
Node: Printf Ordering454141
Ref: Printf Ordering-Footnote-1456932
Node: I18N Portability456996
Ref: I18N Portability-Footnote-1459434
Node: I18N Example459497
Ref: I18N Example-Footnote-1462134
Node: Gawk I18N462206
Node: Advanced Features463028
Node: Nondecimal Data464460
Node: Two-way I/O466067
Ref: Two-way I/O-Footnote-1470729
Node: TCP/IP Networking470806
Node: Portal Files473269
Node: Profiling473932
Node: Invoking Gawk481558
Node: Command Line482735
Node: Options483535
Ref: Options-Footnote-1495425
Node: Other Arguments495450
Node: AWKPATH Variable498202
Ref: AWKPATH Variable-Footnote-1500985
Node: Obsolete501245
Node: Undocumented502326
Node: Known Bugs502578
Node: Library Functions503197
Ref: Library Functions-Footnote-1506381
Node: Library Names506552
Ref: Library Names-Footnote-1510161
Ref: Library Names-Footnote-2510380
Node: General Functions510466
Node: Nextfile Function511402
Node: Assert Function515867
Node: Round Function519198
Node: Cliff Random Function520757
Ref: Cliff Random Function-Footnote-1521740
Node: Ordinal Functions521811
Ref: Ordinal Functions-Footnote-1524885
Node: Join Function525101
Ref: Join Function-Footnote-1526905
Node: Gettimeofday Function527105
Node: Data File Management530883
Node: Filetrans Function531444
Node: Rewind Function534995
Node: File Checking536619
Node: Ignoring Assigns537665
Node: Getopt Function539249
Ref: Getopt Function-Footnote-1550398
Node: Passwd Functions550599
Ref: Passwd Functions-Footnote-1559321
Node: Group Functions559409
Node: Sample Programs567508
Node: Running Examples568238
Node: Clones569009
Node: Cut Program570134
Node: Egrep Program579999
Ref: Egrep Program-Footnote-1587864
Node: Id Program587974
Node: Split Program591659
Node: Tee Program595168
Node: Uniq Program597839
Node: Wc Program605349
Ref: Wc Program-Footnote-1609663
Node: Miscellaneous Programs609885
Node: Dupword Program610874
Node: Alarm Program612925
Node: Translate Program617549
Ref: Translate Program-Footnote-1621865
Ref: Translate Program-Footnote-2622102
Node: Labels Program622236
Ref: Labels Program-Footnote-1625593
Node: Word Sorting625677
Node: History Sorting629980
Node: Extract Program631849
Node: Simple Sed639431
Node: Igawk Program642628
Ref: Igawk Program-Footnote-1655404
Node: Language History655542
Node: V7/SVR3.1656909
Node: SVR4659504
Node: POSIX661151
Node: BTL662939
Node: POSIX/GNU664756
Node: Contributors673380
Node: Installation676632
Node: Gawk Distribution677611
Node: Getting678111
Node: Extracting679357
Node: Distribution contents680736
Node: Unix Installation686333
Node: Quick Installation686919
Node: Additional Configuration Options688666
Node: Configuration Philosophy689761
Node: Non-Unix Installation692144
Node: Amiga Installation692726
Node: BeOS Installation693871
Node: PC Installation695043
Node: PC Binary Installation696176
Node: PC Compiling698030
Node: PC Using702484
Node: Cygwin707202
Ref: Cygwin-Footnote-1708215
Node: VMS Installation708247
Node: VMS Compilation708766
Node: VMS Installation Details710355
Node: VMS Running711972
Node: VMS POSIX713556
Node: Unsupported714820
Node: Atari Installation715218
Node: Atari Compiling716539
Node: Atari Using718468
Node: Tandem Installation721332
Node: Bugs723138
Node: Other Versions726423
Ref: Other Versions-Footnote-1730009
Node: Notes730051
Node: Compatibility Mode730724
Node: Additions731566
Node: Adding Code732338
Node: New Ports738380
Node: Dynamic Extensions742483
Node: Internals743499
Node: Sample Library749835
Node: Internal File Description750485
Node: Internal File Ops754237
Ref: Internal File Ops-Footnote-1759653
Node: Using Internal File Ops759801
Node: Future Extensions761822
Node: Basic Concepts766165
Node: Basic High Level766903
Ref: Basic High Level-Footnote-1771064
Node: Basic Data Typing771258
Node: Floating Point Issues775748
Ref: Floating Point Issues-Footnote-1779671
Ref: Floating Point Issues-Footnote-2779723
Node: Glossary779832
Node: Copying804141
Node: GNU Free Documentation License823338
Node: Index843220

End Tag Table
