<chapter id="commands">

<!-- **********************************************************************
                            commands.docbook
                          ++++++++++++++++++++
  copyright            : (C) 2000, 2001, 2002, 2003, 2004, 2005
                          Rafi Yanai, Shie Erlich, Frank Schoolmeesters
                          & the Krusader Krew
  e-mail               : krusader@users.sourceforge.net
  web site             : http://www.krusader.org
  description          : a Krusader Documentation File

***************************************************************************
* Permission is granted to copy, distribute and/or modify this            *
* document under the terms of the GNU Free Documentation License,         *
* Version 1.1 or any later version published by the Free Software         *
* Foundation; with no Invariant Sections, no Front-Cover Texts and        *
* no Back-Cover Texts.  A copy of the license is available on the         *
* GNU site http://www.gnu.org/licenses/fdl.html or by writing to:         *
* Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston,    *
* MA 02111-1307, USA.                                                     *
*********************************************************************** -->

<title>Command Reference</title>

<sect1 id="file-menu">
<title>The <guimenu>File</guimenu> Menu</title>
<variablelist>
<varlistentry>
  <term>
  <menuchoice>
  <shortcut><keycombo action="simul">&Alt;&Enter;</keycombo></shortcut>
  <guimenu>File</guimenu>
  <guimenuitem>Properties</guimenuitem></menuchoice></term>
  <listitem>
  <para>
  Pop up the File-Properties dialog which allows you to change the
        <emphasis role="bold">file permissions</emphasis>, owner, and group (providing you have the rights to do so).
  </para>
  </listitem>
</varlistentry>


<varlistentry>
  <term>
  <menuchoice>
  <shortcut><keycombo action="simul">&Alt;<keycap>P</keycap></keycombo></shortcut>
  <guimenu>File</guimenu>
  <guimenuitem>Pack</guimenuitem></menuchoice></term>
  <listitem>
  <para>
  Pop up a dialog which allows you to <link linkend="pack-archive">pack</link>
        all the selected files in the active panel.
  </para>
  </listitem>
</varlistentry>

<varlistentry>
  <term>
  <menuchoice>
  <shortcut><keycombo action="simul">&Alt;<keycap>U</keycap></keycombo></shortcut>
  <guimenu>File</guimenu>
  <guimenuitem>Unpack</guimenuitem></menuchoice></term>
  <listitem>
  <para>
  This action tries to <link linkend="unpacking-archives">unpack</link> all the selected files
  in the active panel.
  </para>
  </listitem>
</varlistentry>

<varlistentry>
  <term>
  <menuchoice>
  <shortcut><keycombo action="simul">&Alt;<keycap>E</keycap></keycombo></shortcut>
  <guimenu>File</guimenu>
  <guimenuitem>Test Archive</guimenuitem></menuchoice></term>
  <listitem>
  <para>
  This menu option <link linkend="test-archive">tests the selected archive for corruption</link>.
  </para>
  </listitem>
</varlistentry>

<varlistentry>
  <term>
  <menuchoice>
  <guimenu>File</guimenu>
  <guimenuitem>Compare by content</guimenuitem></menuchoice></term>
  <listitem>
  <para>
  This action compares the two current files - one from each panel via an external graphical diff utility.
        By default &kompare; (part of the kdebase package) is used, but you can also use
        &eg; &xxdiff_url; or &kdiff3_url; , change it in the &konfigdependencie_lnk;.
  </para>
  </listitem>
</varlistentry>

<varlistentry>
  <term>
  <menuchoice>
  <shortcut><keycombo action="simul">&Shift;<keycap>F4</keycap></keycombo></shortcut>
  <guimenu>File</guimenu>
  <guimenuitem>Edit new file</guimenuitem></menuchoice></term>
  <listitem>
  <para>
  This menu option creates a new file to edit.
  </para>
  </listitem>
</varlistentry>

<varlistentry id="multi_rename">
  <term>
  <menuchoice>
  <shortcut><keycombo action="simul">&Shift;<keycap>F9</keycap></keycombo></shortcut>
  <guimenu>File</guimenu>
  <guimenuitem>Multi Rename</guimenuitem></menuchoice></term>
  <listitem>
  <para>
  This menu option starts &krename_url; a very powerful external batch renamer for &kde; 3.x.
  </para>
  <itemizedlist>
    <title>Krename Features</title>
    <listitem><para>Renaming a list of files based on a set of expressions</para></listitem>
    <listitem><para>Copying/moving a list of files to another directory</para></listitem>
    <listitem><para>Convert filenames to upper/lower case</para></listitem>
    <listitem><para>Adding numbers to filenames</para></listitem>
    <listitem><para>Finding and replacing parts of the filename</para></listitem>
    <listitem><para>Rename MP3/OGG Vorbis files based on their ID3 tags</para></listitem>
    <listitem><para>Setting access and modification dates</para></listitem>
    <listitem><para>Changing permissions and file ownership</para></listitem>
    <listitem><para>A plug-in API which allows you to extend Krename's features</para></listitem>
    <listitem><para>Rename directories recursively</para></listitem>
    <listitem><para>Support for KFilePlugins</para></listitem>
    <listitem><para>Create undo file</para></listitem>
    <listitem><para>And many more....</para></listitem>
        </itemizedlist>
  </listitem>
</varlistentry>

<varlistentry>
  <term>
  <menuchoice>
  <guimenu>File</guimenu>
  <guimenuitem>Create Checksum</guimenuitem></menuchoice></term>
  <listitem>
  <para>
  <link linkend="checksum">Checksum creation</link> on file(s) and/or folder(s).
  </para>
  </listitem>
</varlistentry>

<varlistentry>
  <term>
  <menuchoice>
  <guimenu>File</guimenu>
  <guimenuitem>Verify Checksum</guimenuitem></menuchoice></term>
  <listitem>
  <para>
  <link linkend="checksum">Verify Checksum</link> .
  </para>
  </listitem>
</varlistentry>

<varlistentry>
  <term>
  <menuchoice>
  <guimenu>File</guimenu>
  <guimenuitem>Calculate Occupied Space</guimenuitem></menuchoice></term>
  <listitem>
  <para>
  <link linkend="calculate">Calculate</link> the disk space occupied by the selected
        files/directories in the active panel. The disk space for directories is calculated recursively.
  </para>
  </listitem>
</varlistentry>

 <!-- vertical bar -->

<varlistentry>
  <term>
  <menuchoice>
  <shortcut><keycombo action="simul">&Ctrl;<keycap>P</keycap></keycombo></shortcut>
  <guimenu>File</guimenu>
  <guimenuitem>Split file</guimenuitem></menuchoice></term>
  <listitem>
  <para>
  The &splitfile_lnk; function splits a file up into multiple smaller files so that it can be stored
        on several smaller media (like <hardware>diskettes, zip-drives...</hardware>) or sent by e-mail.
  </para>
  </listitem>
</varlistentry>

<varlistentry>
  <term><menuchoice>
  <shortcut><keycombo action="simul">&Ctrl;<keycap>B</keycap></keycombo></shortcut>
  <guimenu>File</guimenu>
  <guimenuitem>Combine files</guimenuitem>
  </menuchoice></term>
  <listitem><para>
  The &combinefiles_lnk; function combines multiple files into one file after the &splitfile_lnk;
        function was used.
  </para></listitem>
</varlistentry>

 <!--vertical bar -->

<varlistentry>
  <term><menuchoice>
  <shortcut><keycombo action="simul">&Ctrl;<keycap>Q</keycap></keycombo></shortcut>
  <guimenu>File</guimenu>
  <guimenuitem>Quit</guimenuitem>
  </menuchoice></term>
  <listitem><para>
  Closes &krusader; and cleans up the temporary directory, the same as pressing <keycap>F10</keycap> key.
  </para></listitem>
</varlistentry>

</variablelist>
</sect1>

<sect1 id="mark-menu">
<title>The <guimenu>Mark</guimenu> Menu</title>
  <para>The actions in this menu allow you to select or unselect multiple files in the
               active panel. Directories are selected (or not) according to your choice in the
               &konfiglookandfeel_lnk;.
        </para>

<variablelist>
  <varlistentry>
  <term><menuchoice>
  <shortcut><keycombo action="simul">&Ctrl;<keycap>+</keycap></keycombo></shortcut>
  <guimenu>Mark</guimenu>
  <guimenuitem>Select Group</guimenuitem>
  </menuchoice></term>
  <listitem><para>
  Opens a dialog which allows you to select files in the active panel.
  You can enter a list of space-separated file patterns (&ie;: <literal role="extension">*.c,  *.ccp</literal>).
  With the Profile Handler you can manage your selections for future usage, this will speed up your work. 
  A double-click on a Profile is the same as entering the selection and pressing
  the <guibutton>OK</guibutton> button.
  </para></listitem>
</varlistentry>

<varlistentry>
  <term><menuchoice>
  <shortcut><keycombo action="simul">&Ctrl;<keycap>-</keycap></keycombo></shortcut>
  <guimenu>Mark</guimenu>
  <guimenuitem>Unselect Group</guimenuitem>
  </menuchoice></term>
  <listitem><para>
  The opposite of <guimenuitem>Select Group</guimenuitem>, the files that match the pattern
        in the active panel will be unselected.
  </para></listitem>
</varlistentry>

<varlistentry>
  <term><menuchoice>
  <shortcut><keycombo action="simul">&Alt;<keycap>+</keycap></keycombo></shortcut>
  <guimenu>Mark</guimenu>
  <guimenuitem>Select All</guimenuitem>
  </menuchoice></term>
  <listitem><para>
  Selects all files in the active panel.
  </para></listitem>
</varlistentry>

<varlistentry>
  <term><menuchoice>
  <shortcut><keycombo action="simul">&Alt;<keycap>-</keycap></keycombo></shortcut>
  <guimenu>Mark</guimenu>
  <guimenuitem>Unselect All</guimenuitem>
  </menuchoice></term>
  <listitem><para>
  Unselects all the files in the active panel.
  </para></listitem>
</varlistentry>

<varlistentry>
  <term><menuchoice>
  <shortcut><keycombo action="simul">&Alt;<keycap>*</keycap></keycombo></shortcut>
  <guimenu>Mark</guimenu>
  <guimenuitem>Invert Selection</guimenuitem>
  </menuchoice></term>
  <listitem><para>
  Invert the selection status of all the files in the active panel
        (&ie;: marked files will become unmarked and unmarked files will be marked).
  </para></listitem>
</varlistentry>

<varlistentry>
  <term><menuchoice>
  <guimenu>Mark</guimenu>
  <guimenuitem>Compare Directories</guimenuitem>
  </menuchoice></term>
  <listitem><para>Toggles &krusader; &comparedir_lnk; function.</para>
  </listitem>
</varlistentry>

<varlistentry>
  <term><menuchoice>
  <guimenu>Mark</guimenu>
  <guimenuitem>Compare setup</guimenuitem>
  </menuchoice></term>
  <listitem><para>Configures the <guimenuitem>Compare Directories</guimenuitem> function.</para>
   <itemizedlist>
            <listitem><para><guimenuitem>Select Newer and Single</guimenuitem> (default)
                      </para></listitem>
            <listitem><para><guimenuitem>Select Single</guimenuitem>
                </para></listitem>
            <listitem><para><guimenuitem>Select Newer</guimenuitem>
                </para></listitem>
            <listitem><para><guimenuitem>Select Different and Single</guimenuitem>
                </para></listitem>
            <listitem><para><guimenuitem>Select Different</guimenuitem>
                </para></listitem>
         </itemizedlist>
  </listitem>
</varlistentry>

</variablelist>
</sect1>

<sect1 id="commands-menu">
<title>The <guimenu>Commands</guimenu> menu</title>
<variablelist>

<varlistentry>
  <term><menuchoice>
  <shortcut><keycombo action="simul">&Ctrl;<keycap>S</keycap></keycombo></shortcut>
  <guimenu>Commands</guimenu>
  <guimenuitem>Search</guimenuitem>
  </menuchoice></term>
  <listitem><para>
  Opens the <link linkend="krusearcher">&krusader; search module</link>.
  </para></listitem>
</varlistentry>

<varlistentry>
  <term><menuchoice>
  <shortcut><keycombo action="simul">&Ctrl;<keycap>L</keycap></keycombo></shortcut>
  <guimenu>Commands</guimenu>
  <guimenuitem>Locate</guimenuitem>
  </menuchoice></term>
  <listitem><para>
  Opens the &locate_lnk;, allows fast file searching.
  </para></listitem>
</varlistentry>

<varlistentry>
  <term><menuchoice>
  <shortcut><keycombo action="simul">&Ctrl;<keycap>D</keycap></keycombo></shortcut>
  <guimenu>Commands</guimenu>
  <guimenuitem>Synchronize Directories</guimenuitem>
  </menuchoice></term>
  <listitem><para>
  The &syncdirs_lnk; function allows you to compare the left and right panels and show the differences
  between them.
  After the compare function, you can move files/directories so that they can be synchronized.
  </para>
  </listitem>
</varlistentry>

 <!-- vertical bar -->

<varlistentry>
  <term><menuchoice>
  <shortcut><keycombo action="simul"><keycap>F2</keycap></keycombo></shortcut>
  <guimenu>Commands</guimenu>
  <guimenuitem>Terminal</guimenuitem>
  </menuchoice></term>
  <listitem><para>
  Opens a terminal window in the default directory (usually your home directory).
  You can choose your favorite terminal application in the &konfiggereral_lnk;.
  </para></listitem>
</varlistentry>

 <!-- vertical bar -->

<varlistentry id="root-mode">
  <term><menuchoice>
  <shortcut><keycombo action="simul">&Alt;<keycap>K</keycap></keycombo></shortcut>
  <guimenu>Commands</guimenu>
  <guimenuitem>Start Root Mode Krusader</guimenuitem>
  </menuchoice></term>
  <listitem><para>
  Starts &krusader; in &rootmode_lnk; at the same location.</para>
        <caution><para>Be careful when using &krusader; with ROOT PRIVILEGES.</para></caution>
  </listitem>
</varlistentry>

 <!-- vertical bar -->

<varlistentry>
  <term><menuchoice>
  <guimenu>Commands</guimenu>
  <guimenuitem>Select Remote Charset</guimenuitem>
  </menuchoice></term>
  <listitem><para>
  Change the charset of the remote host of the <link linkend="remote-connections">remote connection</link>.
  </para></listitem>
</varlistentry>

<varlistentry>
  <term><menuchoice>
  <shortcut><keycombo action="simul">&Ctrl;<keycap>N</keycap></keycombo></shortcut>
  <guimenu>Commands</guimenu>
  <guimenuitem>New Net Connection</guimenuitem>
  </menuchoice></term>
  <listitem><para>
  Opens the <link linkend="remote-connections">New Network Connection</link> dialog which allows
  you to open a &FTP;, SMB, FISH or SFTP connection to a remote host.
  Note: we are planning to rewrite this dialog.
  If you leave the username and password fields empty you'll login as anonymous.
  You can <link linkend="bookman">Bookmark</link> these remote sessions.
  </para></listitem>
</varlistentry>

<!--
<varlistentry>
        <term>
  <menuchoice>
  <shortcut><keycombo action="simul">&Shift;&Ctrl;<keycap>N</keycap></keycombo></shortcut>
  <guimenu>Commands</guimenu>
  <guimenuitem>Disconnect From Net</guimenuitem></menuchoice></term>
  <listitem><para>
  End the <link linkend="remote-connections">remote connection</link> in the active panel and
  return to the startup path.
  </para></listitem>
</varlistentry>
-->

<varlistentry id="panel_profiles">
        <term>
  <menuchoice>
  <shortcut><keycombo action="simul">&Alt;<keycap>L</keycap></keycombo></shortcut>
  <guimenu>Commands</guimenu>
  <guimenuitem>Profiles</guimenuitem></menuchoice></term>
  <listitem><para>
  A Panel profiles contains: 
  <itemizedlist>
          <listitem><para>all the tabs paths (left / right)</para></listitem>
          <listitem><para>the current tab (left / right)</para></listitem>
          <listitem><para>the active panel (left or right)</para></listitem>
  </itemizedlist>
  All this information is stored in the &krusaderrc_lnk; file. 
  A Panel profile configuration can be saved, restored, overwitten and removed.
  You can have several Panel profiles &eg; file-managment, ftp-managment, home, work, etc.     
  With the &konfigstartpg_lnk; or with a <link linkend="starting-krusader">commandline option</link> 
  you can load the desired Panel Profile on startup.
  </para></listitem>
</varlistentry>


<varlistentry>
  <term><menuchoice>
  <shortcut><keycombo action="simul">&Ctrl;<keycap>`</keycap></keycombo></shortcut>
  <guimenu>Commands</guimenu>
  <guimenuitem>User Menu</guimenuitem>
  </menuchoice></term>
  <listitem>
  <para>
  Please use at this moment the <link linkend="useractions-menu">Useractions menu</link> instead.
  Our plans for the Usermenu are to make user-configurable KActionMenus.
  With this one could make a UserMenu containing &eg; all music-related actions and place
  this in the button-bar.... (or anywhere else).
  </para>
  </listitem>
</varlistentry>

</variablelist>
</sect1>


<sect1 id="view-menu">
<title>The <guimenu>View</guimenu> menu</title>

  <para>The action in this sub menu usually affects the current &krusader; session.
         If you want to make permanent changes use &konfigstartpg_lnk;.</para>

<variablelist>

<varlistentry>
  <term><menuchoice>
  <shortcut><keycombo action="simul">&Ctrl;<keycap>.</keycap></keycombo></shortcut>
  <guimenu>View</guimenu>
  <guimenuitem>Show Hidden Files</guimenuitem>
  </menuchoice></term>
  <listitem><para>Toggles the option to display or not the hidden files in the &krusader; panels.</para>
  </listitem>
</varlistentry>

<varlistentry>
  <term><menuchoice>
  <shortcut><keycombo action="simul">&Ctrl;<keycap>U</keycap></keycombo></shortcut>
  <guimenu>View</guimenu>
  <guimenuitem>Swap Panels</guimenuitem>
  </menuchoice></term>
  <listitem><para>Swaps the panels. The left panel wil become the right panel and vice versa.</para>
  </listitem>
</varlistentry>

<varlistentry>
  <term><menuchoice>
  <shortcut><keycombo action="simul">&Shift;<keycap>F10</keycap></keycombo></shortcut>
  <guimenu>View</guimenu>
  <guimenuitem>All Files</guimenuitem>
  </menuchoice></term>
  <listitem><para>Turn off all filters and display all files.</para>
  </listitem>
</varlistentry>

<varlistentry>
  <term><menuchoice>
  <shortcut><keycombo action="simul">&Shift;<keycap>F12</keycap></keycombo></shortcut>
  <guimenu>View</guimenu>
  <guimenuitem>Custom</guimenuitem>
  </menuchoice></term>
  <listitem><para>Allows you to install a custom filter on the &krusader; panel. Only files that match
  the filter pattern(s) and directories will be displayed. 
  Don't forget to deactivate the custom filter after use, or some files may not be visible.</para>
  </listitem>
</varlistentry>

<!--
  <varlistentry>
  <term><menuchoice>
   <shortcut><keycombo action="simul">&Ctrl;<keycap>.</keycap></keycombo></shortcut>
  <guimenu>View</guimenu>
  <guimenuitem>Sort By Extention</guimenuitem>
  </menuchoice></term>
  <listitem><para>When this action is turned on, the main sorting key in the &krusader; panel becomes
    the file extention (the part of the filename after the last '.'). This is useful for grouping
          files of the same type closer together.
  </para>
  &disablenote;
  </listitem>
  </varlistentry>

  <varlistentry>
  <term><menuchoice>
  <shortcut><keycombo action="simul">&Ctrl;<keycap>F11</keycap></keycombo></shortcut>
  <guimenu>View</guimenu>
  <guimenuitem>Executables</guimenuitem>
  </menuchoice></term>
  <listitem><para>Display only executables and directories.
  </para>
  &disablenote;
  </listitem>
  </varlistentry>
-->


 <!-- vertical bar -->

<varlistentry>
  <term><menuchoice>
  <shortcut><keycombo action="simul">&Alt;&Ctrl;<keycap>r</keycap></keycombo></shortcut>
  <guimenu>View</guimenu>
  <guimenuitem>Vertical Mode</guimenuitem>
  </menuchoice></term>
  <listitem><para>Toggels the &list_panel_lnk; between horizontal and vertical mode.</para>
  </listitem>
</varlistentry>

<varlistentry>
  <term><menuchoice>
  <guimenu>View</guimenu>
  <guimenuitem>Show Main Toolbar</guimenuitem>
  </menuchoice></term>
  <listitem><para>Shows the &main_toolbar_lnk; if checked.</para>
  </listitem>
</varlistentry>

<varlistentry>
  <term><menuchoice>
  <guimenu>View</guimenu>
  <guimenuitem>Show Actions Toolbar</guimenuitem>
  </menuchoice></term>
  <listitem><para>Shows the &actions_toolbar_lnk; if checked.</para>
  </listitem>
</varlistentry>

<varlistentry>
  <term><menuchoice>
  <guimenu>View</guimenu>
  <guimenuitem>Show Statusbar</guimenuitem>
  </menuchoice></term>
  <listitem><para>Shows the <link linkend="mainwindow">Statusbar</link> if checked.</para>
  </listitem>
</varlistentry>

<varlistentry>
  <term><menuchoice>
  <guimenu>View</guimenu>
  <guimenuitem>Show FN Keys bar</guimenuitem>
  </menuchoice></term>
  <listitem><para>Shows the &fnkeybar_lnk; if checked.</para>
  </listitem>
</varlistentry>

<varlistentry>
  <term><menuchoice>
  <guimenu>View</guimenu>
  <guimenuitem>Show Command Line</guimenuitem>
  </menuchoice></term>
  <listitem><para>Shows the <link linkend="cmdline">Command Line</link> if checked.</para>
  </listitem>
</varlistentry>

<varlistentry>
  <term><menuchoice>
  <guimenu>View</guimenu>
  <guimenuitem>Show Terminal Emulator</guimenuitem>
  </menuchoice></term>
  <listitem><para>Show the <link linkend="cmdline">Terminal Emulator</link> if checked.</para>
  </listitem>
</varlistentry>

</variablelist>
</sect1>

<sect1 id="settings-menu">
<title>The <guimenu>Settings</guimenu> menu</title>
<variablelist>

<varlistentry>
  <term><menuchoice>
  <guimenu>Settings</guimenu>
  <guimenuitem>Configure &krusader;</guimenuitem>
  </menuchoice></term>
  <listitem><para>Opens the &krusader; configuration center: <link linkend="konfigurator">Konfigurator</link>.</para>
  </listitem>
</varlistentry>

<varlistentry>
  <term><menuchoice>
  <guimenu>Settings</guimenu>
  <guimenuitem>Configure Toolbars</guimenuitem>
  </menuchoice></term>
  <listitem><para>Opens a dialog which allows you to configure the &main_toolbar_lnk; or the &actions_toolbar_lnk;.
                  The same dialog can be reached from the &konfiglookandfeel_lnk;.</para>
  </listitem>
</varlistentry>

<varlistentry>
  <term><menuchoice>
  <guimenu>Settings</guimenu>
  <guimenuitem>Configure Shortcuts</guimenuitem>
  </menuchoice></term>
  <listitem><para>Opens a dialog which allows you to configure the &krusader; key bindings.
                        The same dialog can be reached from the &konfiglookandfeel_lnk;.</para>
  </listitem>
</varlistentry>

<varlistentry>
  <term><menuchoice>
  <guimenu>Settings</guimenu>
  <guimenuitem>Save Position</guimenuitem>
  </menuchoice></term>
  <listitem><para>Saves the current size and position of the &krusader; main window.
                  This action can be automated with <guilabel>"Save settings on exit"</guilabel> 
                  in &konfigstartpg_lnk;</para>
  </listitem>
</varlistentry>

</variablelist>
</sect1>

<sect1 id="useractions-menu">
<title>The <guimenu>Useractions</guimenu> menu</title>
<variablelist>

<varlistentry>
  <term><menuchoice>
  <guimenu>Useractions</guimenu>
  <guimenuitem>Manage useractions</guimenuitem>
  </menuchoice></term>
  <listitem><para>Opens the &useractions_lnk; manager.</para>
  </listitem>
</varlistentry>

<varlistentry>
  <term><menuchoice>
  <guimenu>Useractions</guimenu>
  <guimenuitem>Your foo Useractions</guimenuitem>
  </menuchoice></term>
  <listitem><para>Opens the default Useractions and Useractions created by the user.</para>
  </listitem>
</varlistentry>

</variablelist>
</sect1>

<sect1 id="tools-menu">
<title>The <guimenu>Tools</guimenu> menu</title>
<variablelist>

<varlistentry>
  <term><menuchoice>
  <shortcut><keycombo action="simul">&Alt;<keycap>/</keycap></keycombo></shortcut>
  <guimenu>Tools</guimenu>
  <guimenuitem>MountMan</guimenuitem>
  </menuchoice></term>
  <listitem><para>Opens <link linkend="mount-man">MountMan</link> - your Mount-Manager.</para>
  </listitem>
</varlistentry>

<varlistentry>
  <term><menuchoice>
  <shortcut><keycombo action="simul">&Alt;<keycap>d</keycap></keycombo></shortcut>
  <guimenu>Tools</guimenu>
  <guimenuitem>Disk Usage</guimenuitem>
  </menuchoice></term>
  <listitem><para>Opens &diskusage_lnk;.</para>
  </listitem>
</varlistentry>

</variablelist>
</sect1>

<sect1 id="help-menu">
<title>The <guimenu>Help</guimenu> menu</title>
<variablelist>

<varlistentry>
  <term><menuchoice>
  <guimenu>Help</guimenu>
  <guimenuitem>Krusader Handbook</guimenuitem>
  </menuchoice></term>
  <listitem><para>Invokes the &kde; Help system starting at the &krusader; help pages (this document).</para>
  </listitem>
</varlistentry>

<varlistentry>
  <term><menuchoice>
  <shortcut><keycombo action="simul">&Shift;<keycap>F1</keycap></keycombo></shortcut>
  <guimenu>Help</guimenu>
  <guimenuitem>What's This?</guimenuitem>
  </menuchoice></term>
  <listitem><para>Changes the mouse cursor to a combination arrow and question mark.
      Clicking on items within &krusader; will open a help window (if one exists for that particular item)
      explaining the item's function.</para>
  </listitem>
</varlistentry>

 <!-- vertical bar -->

<varlistentry>
  <term><menuchoice>
  <guimenu>Help</guimenu>
  <guimenuitem>Report Bug</guimenuitem>
  </menuchoice></term>
  <listitem><para>Opens the bug report dialog for sending bug reports via mail.</para>
    <note><para><remark>If you've got bugs to report please do not use &kde;'s bugzilla
    http://bugs.kde.org/, &kde;'s Bug Tracking System.
    We use Sourceforge.net for reporting and managing our &faqbugreports_lnk;.</remark></para></note>
    <para>Wishes, patches, and comments are always
    <link linkend="faqg_wish_patch">welcome</link>.</para>
  </listitem>
</varlistentry>

 <!-- vertical bar -->

<varlistentry>
  <term><menuchoice>
  <guimenu>Help</guimenu>
  <guimenuitem>About Krusader</guimenuitem>
  </menuchoice></term>
  <listitem><para>This will display version, author, and license information.</para>
  </listitem>
</varlistentry>

<varlistentry>
  <term><menuchoice>
  <guimenu>Help</guimenu>
  <guimenuitem>About KDE</guimenuitem>
  </menuchoice></term>
  <listitem><para>This displays the &kde; version and basic information.</para>
  </listitem>
</varlistentry>

</variablelist>
</sect1>

</chapter>
