GTK-GNUTELLA(1)

NAME
gtk-gnutella - A Gnutella client for Gtk+

SYNOPSIS
gtk-gnutella

DESCRIPTION
gtk-gnutella is a GTK+ Gnutella client for Unix. It supports both searching and sharing with the 0.6 version of the gnutella protocol.

You should be aware that as of October 19th, 2002, this manual page is fairly incomplete, with parts that are obsolete. If you would like to remedy to this situation and write a decent manual page, please send your patch/updates to gtk-gnutella-devel@lists.sourceforge.net.

OPTIONS
None.

GETTING STARTED
When gtk-gnutella is first started, it will attempt to connect to a well-known hosts server for some hosts to connect to. If you know a host you want to connect to, you can enter it in the box on the GnutellaNet tab and push the Add button. When first connecting to the gnutella network, it can take a minute or two to establish a stable connection. Be patient.

SEARCHING
Click "Search" to switch to the search tab. Type what you are searching for into the edit box at the top of the window and either press Enter or push the "New Search" button. A new tab, labeled with your search term, will appear in the window, with files that are found listed in the list below.

You can have multiple searches running at once. To start another search while the first one is running, simply enter another search term into the edit box at the top of the window. A new tab will appear. You can switch between the two tabs by clicking on them, or by selecting the search from the "Active searches" drop-down list.

To stop a particular search and remove its tab from the search window, select the search by clicking on its tab and click the "Close this search" button. If you want to clear the list for a particular search, but want to continue to see new files that are received for this search, click the "Clear results" button.

You can also switch from the default tab to a nice list where all your searches appear on the left side, but you need to have a big-enough screen to benefit from that. To enable it, right-click in the search window and select "Show search list".

By entering a number in the "Minimum connection speed" box, you can limit search results to only those files that are shared by hosts with at least the connection speed that you specify. The units are in kbps, so if you only want to hear from hosts that are connected at 56k or higher, enter 56 in this box.

When you find a file that you want to download, select the file in the list and press "Download selected files". This file will be placed in the download queue. If the "Jump to downloads" checkbox is checked, when you click "Download selected files", gtk-gnutella will switch to the downloads tab. From there you can watch the download progress of the file(s) you are downloading. If "Jump to downloads" is not checked, you will still be staring at the search tab. But no worries, the file will be downloading whether you're looking or not.

It is also possible to select a bunch of files for downloading at once. By holding down the control or shift keys while clicking files, you can select several files and then click "Download selected files" to put them all in the download queue at once.

CONFIGURATION
Most of the configuration can be done via the "Config" pane. You will find several tabs there, each tab regrouping common information. But some specific information pertaining to downloads or searches are directly available on the "Downloads" and "Uploads" panes.

If you linger your mouse over each configuration parameter, a tooltip window will popup explaining the meaning of that parameter. You may have to press "Enter" after a text input, or move the focus to another parameter to validate your entry. Items configured via spin buttons normally take effect immediately, unless you type text instead of using the spin buttons.

FILES

$GTK_GNUTELLA_DIR/config_gnet
    Per-user configuration file, for Gnet. This can be edited when the program is not running, but it is best to use the GUI to change configuration variables. gtk-gnutella saves this file every time the program is exited normally.

$GTK_GNUTELLA_DIR/config_gui
    GUI configuration. It is best to not edit this file.

$GTK_GNUTELLA_DIR/dmesh
    This is where the download mesh is persisted. You don't need to worry about this.

$GTK_GNUTELLA_DIR/dmesh_ban
    This is where temporarily banned download mesh entries are stored.

$GTK_GNUTELLA_DIR/done.namesize
    This file holds the name and size of files completely downloaded by gtk-gnutella and which will now be ignored.

$GTK_GNUTELLA_DIR/done.sha1
    This file holds the SHA1 of files completely downloaded by gtk-gnutella and which will now be ignored.

$GTK_GNUTELLA_DIR/downloads
    This is where the download queue is persisted. Only the direct downloads (i.e. non-pushed) can be saved, since they don't need routing information.

$GTK_GNUTELLA_DIR/gwcache
    This is the list of known other Gnutella web caches, which. gtk-gnutella refreshes regularly.

$GTK_GNUTELLA_DIR/hosts
    This is the host cache. This is saved by gtk-gnutella on exit and should not be edited by hand.

$GTK_GNUTELLA_DIR/searches.xml
    This is where the open searches and all the search filters are saved.

$GTK_GNUTELLA_DIR/sha1_cache
    This is where the cache of all the computed SHA1 is stored.

$GTK_GNUTELLA_DIR/upload_stats
    This file keeps track of the upload statistics.

ENVIRONMENT
Gtk-Gnutella searches GTK_GNUTELLA_DIR for configuration files. If this variable is not set, HOME is used instead. If HOME is not set, then no configuration information will be saved when gtk-gnutella exits.

MAILING LISTS
There are a couple of mailing lists for gtk-gnutella. See http://sourceforge.net/mail/?group_id=4467 for more info.

BUGS
gtk-gnutella is beta-quality software, and still has bugs and incomplete or missing features. But which software doesn't for its authors?

There are probably other missing features that should be listed here.

A list of known bugs might be available at the gtk-gnutella web site (see below.)

SEE ALSO
Additional information about gtk-gnutella and the latest version are available at http://gtk-gnutella.sourceforge.net/

Additional information about gnutella is available at http://www.the-gdf.com/ http://www.infoanarchy.org/wiki/wiki.pl?Gnutella http://rfc-gnutella.sourceforge.net/

AUTHORS
Yann Grossel wrote the original Gtk-Gnutella .

Raphael Manfredi <Raphael_Manfredi@pobox.com> is the current maintainer and project leader (since version 0.14, released early September 2001).
Richard Eckart <wyldfire@users.sourceforge.net> is actively working on GUI issues.

For a full list of contributors, open the "About" menu.

Brian St. Pierre <bstpierre@bstpierre.org> wrote the initial version of this manpage.

COPYRIGHT
gtk-gnutella is Copyright (c) 2000, Yann Grossel, with additional copyrights held by other contributors 2000, 2001 and 2002.

License to use and copy gtk-gnutella is given under the terms of the GNU General Public License (GPL), version 2. Please see the file COPYING in the distribution for complete information. Permission is granted to make and distribute verbatim copies of this manual page provided the copyright notice and this permission notice are preserved on all copies. Permission is granted to copy and distribute modified versions of this manual page under the conditions for verbatim copying, provided that the entire resulting derived work is distributed under the terms of a permission notice identical to this one.